1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2003 Peter Wemm 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $FreeBSD$ 29 */ 30 31 /* 32 * Register defintions for the i8259A programmable interrupt controller. 33 */ 34 35 #ifndef _DEV_IC_I8259_H_ 36 #define _DEV_IC_I8259_H_ 37 38 /* Initialization control word 1. Written to even address. */ 39 #define ICW1_IC4 0x01 /* ICW4 present */ 40 #define ICW1_SNGL 0x02 /* 1 = single, 0 = cascaded */ 41 #define ICW1_ADI 0x04 /* 1 = 4, 0 = 8 byte vectors */ 42 #define ICW1_LTIM 0x08 /* 1 = level trigger, 0 = edge */ 43 #define ICW1_RESET 0x10 /* must be 1 */ 44 /* 0x20 - 0x80 - in 8080/8085 mode only */ 45 46 /* Initialization control word 2. Written to the odd address. */ 47 /* No definitions, it is the base vector of the IDT for 8086 mode */ 48 49 /* Initialization control word 3. Written to the odd address. */ 50 /* For a master PIC, bitfield indicating a slave 8259 on given input */ 51 /* For slave, lower 3 bits are the slave's ID binary id on master */ 52 53 /* Initialization control word 4. Written to the odd address. */ 54 #define ICW4_8086 0x01 /* 1 = 8086, 0 = 8080 */ 55 #define ICW4_AEOI 0x02 /* 1 = Auto EOI */ 56 #define ICW4_MS 0x04 /* 1 = buffered master, 0 = slave */ 57 #define ICW4_BUF 0x08 /* 1 = enable buffer mode */ 58 #define ICW4_SFNM 0x10 /* 1 = special fully nested mode */ 59 60 /* Operation control words. Written after initialization. */ 61 62 /* Operation control word type 1 */ 63 /* 64 * No definitions. Written to the odd address. Bitmask for interrupts. 65 * 1 = disabled. 66 */ 67 68 /* Operation control word type 2. Bit 3 (0x08) must be zero. Even address. */ 69 #define OCW2_L0 0x01 /* Level */ 70 #define OCW2_L1 0x02 71 #define OCW2_L2 0x04 72 /* 0x08 must be 0 to select OCW2 vs OCW3 */ 73 /* 0x10 must be 0 to select OCW2 vs ICW1 */ 74 #define OCW2_EOI 0x20 /* 1 = EOI */ 75 #define OCW2_SL 0x40 /* EOI mode */ 76 #define OCW2_R 0x80 /* EOI mode */ 77 78 /* Operation control word type 3. Bit 3 (0x08) must be set. Even address. */ 79 #define OCW3_RIS 0x01 /* 1 = read IS, 0 = read IR */ 80 #define OCW3_RR 0x02 /* register read */ 81 #define OCW3_P 0x04 /* poll mode command */ 82 /* 0x08 must be 1 to select OCW3 vs OCW2 */ 83 #define OCW3_SEL 0x08 /* must be 1 */ 84 /* 0x10 must be 0 to select OCW3 vs ICW1 */ 85 #define OCW3_SMM 0x20 /* special mode mask */ 86 #define OCW3_ESMM 0x40 /* enable SMM */ 87 88 #endif /* !_DEV_IC_I8259_H_ */ 89