1 /*- 2 * Copyright (c) 2000 3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include <sys/cdefs.h> 34 __FBSDID("$FreeBSD$"); 35 36 /* 37 * Driver for the Broadcom BCM54xx/57xx 1000baseTX PHY. 38 */ 39 40 #include <sys/param.h> 41 #include <sys/systm.h> 42 #include <sys/kernel.h> 43 #include <sys/module.h> 44 #include <sys/socket.h> 45 #include <sys/bus.h> 46 47 #include <net/if.h> 48 #include <net/ethernet.h> 49 #include <net/if_media.h> 50 51 #include <dev/mii/mii.h> 52 #include <dev/mii/miivar.h> 53 #include "miidevs.h" 54 55 #include <dev/mii/brgphyreg.h> 56 #include <net/if_arp.h> 57 #include <machine/bus.h> 58 #include <dev/bge/if_bgereg.h> 59 #include <dev/bce/if_bcereg.h> 60 61 #include <dev/pci/pcireg.h> 62 #include <dev/pci/pcivar.h> 63 64 #include "miibus_if.h" 65 66 static int brgphy_probe(device_t); 67 static int brgphy_attach(device_t); 68 69 struct brgphy_softc { 70 struct mii_softc mii_sc; 71 int serdes_flags; /* Keeps track of the serdes type used */ 72 #define BRGPHY_5706S 0x0001 73 #define BRGPHY_5708S 0x0002 74 #define BRGPHY_NOANWAIT 0x0004 75 #define BRGPHY_5709S 0x0008 76 int bce_phy_flags; /* PHY flags transferred from the MAC driver */ 77 }; 78 79 static device_method_t brgphy_methods[] = { 80 /* device interface */ 81 DEVMETHOD(device_probe, brgphy_probe), 82 DEVMETHOD(device_attach, brgphy_attach), 83 DEVMETHOD(device_detach, mii_phy_detach), 84 DEVMETHOD(device_shutdown, bus_generic_shutdown), 85 DEVMETHOD_END 86 }; 87 88 static devclass_t brgphy_devclass; 89 90 static driver_t brgphy_driver = { 91 "brgphy", 92 brgphy_methods, 93 sizeof(struct brgphy_softc) 94 }; 95 96 DRIVER_MODULE(brgphy, miibus, brgphy_driver, brgphy_devclass, 0, 0); 97 98 static int brgphy_service(struct mii_softc *, struct mii_data *, int); 99 static void brgphy_setmedia(struct mii_softc *, int); 100 static void brgphy_status(struct mii_softc *); 101 static void brgphy_mii_phy_auto(struct mii_softc *, int); 102 static void brgphy_reset(struct mii_softc *); 103 static void brgphy_enable_loopback(struct mii_softc *); 104 static void bcm5401_load_dspcode(struct mii_softc *); 105 static void bcm5411_load_dspcode(struct mii_softc *); 106 static void bcm54k2_load_dspcode(struct mii_softc *); 107 static void brgphy_fixup_5704_a0_bug(struct mii_softc *); 108 static void brgphy_fixup_adc_bug(struct mii_softc *); 109 static void brgphy_fixup_adjust_trim(struct mii_softc *); 110 static void brgphy_fixup_ber_bug(struct mii_softc *); 111 static void brgphy_fixup_crc_bug(struct mii_softc *); 112 static void brgphy_fixup_jitter_bug(struct mii_softc *); 113 static void brgphy_ethernet_wirespeed(struct mii_softc *); 114 static void brgphy_jumbo_settings(struct mii_softc *, u_long); 115 116 static const struct mii_phydesc brgphys[] = { 117 MII_PHY_DESC(BROADCOM, BCM5400), 118 MII_PHY_DESC(BROADCOM, BCM5401), 119 MII_PHY_DESC(BROADCOM, BCM5411), 120 MII_PHY_DESC(BROADCOM, BCM54K2), 121 MII_PHY_DESC(BROADCOM, BCM5701), 122 MII_PHY_DESC(BROADCOM, BCM5703), 123 MII_PHY_DESC(BROADCOM, BCM5704), 124 MII_PHY_DESC(BROADCOM, BCM5705), 125 MII_PHY_DESC(BROADCOM, BCM5706), 126 MII_PHY_DESC(BROADCOM, BCM5714), 127 MII_PHY_DESC(BROADCOM, BCM5421), 128 MII_PHY_DESC(BROADCOM, BCM5750), 129 MII_PHY_DESC(BROADCOM, BCM5752), 130 MII_PHY_DESC(BROADCOM, BCM5780), 131 MII_PHY_DESC(BROADCOM, BCM5708C), 132 MII_PHY_DESC(BROADCOM2, BCM5482), 133 MII_PHY_DESC(BROADCOM2, BCM5708S), 134 MII_PHY_DESC(BROADCOM2, BCM5709C), 135 MII_PHY_DESC(BROADCOM2, BCM5709S), 136 MII_PHY_DESC(BROADCOM2, BCM5709CAX), 137 MII_PHY_DESC(BROADCOM2, BCM5722), 138 MII_PHY_DESC(BROADCOM2, BCM5755), 139 MII_PHY_DESC(BROADCOM2, BCM5754), 140 MII_PHY_DESC(BROADCOM2, BCM5761), 141 MII_PHY_DESC(BROADCOM2, BCM5784), 142 #ifdef notyet /* better handled by ukphy(4) until WARs are implemented */ 143 MII_PHY_DESC(BROADCOM2, BCM5785), 144 #endif 145 MII_PHY_DESC(BROADCOM3, BCM5717C), 146 MII_PHY_DESC(BROADCOM3, BCM5719C), 147 MII_PHY_DESC(BROADCOM3, BCM5720C), 148 MII_PHY_DESC(BROADCOM3, BCM57765), 149 MII_PHY_DESC(BROADCOM3, BCM57780), 150 MII_PHY_DESC(BROADCOM4, BCM5725C), 151 MII_PHY_DESC(xxBROADCOM_ALT1, BCM5906), 152 MII_PHY_END 153 }; 154 155 static const struct mii_phy_funcs brgphy_funcs = { 156 brgphy_service, 157 brgphy_status, 158 brgphy_reset 159 }; 160 161 #define HS21_PRODUCT_ID "IBM eServer BladeCenter HS21" 162 #define HS21_BCM_CHIPID 0x57081021 163 164 static int 165 detect_hs21(struct bce_softc *bce_sc) 166 { 167 char *sysenv; 168 int found; 169 170 found = 0; 171 if (bce_sc->bce_chipid == HS21_BCM_CHIPID) { 172 sysenv = getenv("smbios.system.product"); 173 if (sysenv != NULL) { 174 if (strncmp(sysenv, HS21_PRODUCT_ID, 175 strlen(HS21_PRODUCT_ID)) == 0) 176 found = 1; 177 freeenv(sysenv); 178 } 179 } 180 return (found); 181 } 182 183 /* Search for our PHY in the list of known PHYs */ 184 static int 185 brgphy_probe(device_t dev) 186 { 187 188 return (mii_phy_dev_probe(dev, brgphys, BUS_PROBE_DEFAULT)); 189 } 190 191 /* Attach the PHY to the MII bus */ 192 static int 193 brgphy_attach(device_t dev) 194 { 195 struct brgphy_softc *bsc; 196 struct bge_softc *bge_sc = NULL; 197 struct bce_softc *bce_sc = NULL; 198 struct mii_softc *sc; 199 struct ifnet *ifp; 200 201 bsc = device_get_softc(dev); 202 sc = &bsc->mii_sc; 203 204 mii_phy_dev_attach(dev, MIIF_NOISOLATE | MIIF_NOMANPAUSE, 205 &brgphy_funcs, 0); 206 207 bsc->serdes_flags = 0; 208 ifp = sc->mii_pdata->mii_ifp; 209 210 /* Find the MAC driver associated with this PHY. */ 211 if (strcmp(ifp->if_dname, "bge") == 0) 212 bge_sc = ifp->if_softc; 213 else if (strcmp(ifp->if_dname, "bce") == 0) 214 bce_sc = ifp->if_softc; 215 216 /* Handle any special cases based on the PHY ID */ 217 switch (sc->mii_mpd_oui) { 218 case MII_OUI_BROADCOM: 219 switch (sc->mii_mpd_model) { 220 case MII_MODEL_BROADCOM_BCM5706: 221 case MII_MODEL_BROADCOM_BCM5714: 222 /* 223 * The 5464 PHY used in the 5706 supports both copper 224 * and fiber interfaces over GMII. Need to check the 225 * shadow registers to see which mode is actually 226 * in effect, and therefore whether we have 5706C or 227 * 5706S. 228 */ 229 PHY_WRITE(sc, BRGPHY_MII_SHADOW_1C, 230 BRGPHY_SHADOW_1C_MODE_CTRL); 231 if (PHY_READ(sc, BRGPHY_MII_SHADOW_1C) & 232 BRGPHY_SHADOW_1C_ENA_1000X) { 233 bsc->serdes_flags |= BRGPHY_5706S; 234 sc->mii_flags |= MIIF_HAVEFIBER; 235 } 236 break; 237 } 238 break; 239 case MII_OUI_BROADCOM2: 240 switch (sc->mii_mpd_model) { 241 case MII_MODEL_BROADCOM2_BCM5708S: 242 bsc->serdes_flags |= BRGPHY_5708S; 243 sc->mii_flags |= MIIF_HAVEFIBER; 244 break; 245 case MII_MODEL_BROADCOM2_BCM5709S: 246 /* 247 * XXX 248 * 5720S and 5709S shares the same PHY id. 249 * Assume 5720S PHY if parent device is bge(4). 250 */ 251 if (bge_sc != NULL) 252 bsc->serdes_flags |= BRGPHY_5708S; 253 else 254 bsc->serdes_flags |= BRGPHY_5709S; 255 sc->mii_flags |= MIIF_HAVEFIBER; 256 break; 257 } 258 break; 259 } 260 261 PHY_RESET(sc); 262 263 /* Read the PHY's capabilities. */ 264 sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & sc->mii_capmask; 265 if (sc->mii_capabilities & BMSR_EXTSTAT) 266 sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR); 267 device_printf(dev, " "); 268 269 #define ADD(m, c) ifmedia_add(&sc->mii_pdata->mii_media, (m), (c), NULL) 270 271 /* Add the supported media types */ 272 if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { 273 mii_phy_add_media(sc); 274 printf("\n"); 275 } else { 276 sc->mii_anegticks = MII_ANEGTICKS_GIGE; 277 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_1000_SX, IFM_FDX, sc->mii_inst), 278 BRGPHY_S1000 | BRGPHY_BMCR_FDX); 279 printf("1000baseSX-FDX, "); 280 /* 2.5G support is a software enabled feature on the 5708S and 5709S. */ 281 if (bce_sc && (bce_sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG)) { 282 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_2500_SX, IFM_FDX, sc->mii_inst), 0); 283 printf("2500baseSX-FDX, "); 284 } else if ((bsc->serdes_flags & BRGPHY_5708S) && bce_sc && 285 (detect_hs21(bce_sc) != 0)) { 286 /* 287 * There appears to be certain silicon revision 288 * in IBM HS21 blades that is having issues with 289 * this driver wating for the auto-negotiation to 290 * complete. This happens with a specific chip id 291 * only and when the 1000baseSX-FDX is the only 292 * mode. Workaround this issue since it's unlikely 293 * to be ever addressed. 294 */ 295 printf("auto-neg workaround, "); 296 bsc->serdes_flags |= BRGPHY_NOANWAIT; 297 } 298 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, sc->mii_inst), 0); 299 printf("auto\n"); 300 } 301 302 #undef ADD 303 MIIBUS_MEDIAINIT(sc->mii_dev); 304 return (0); 305 } 306 307 static int 308 brgphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) 309 { 310 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 311 int val; 312 313 switch (cmd) { 314 case MII_POLLSTAT: 315 break; 316 case MII_MEDIACHG: 317 /* If the interface is not up, don't do anything. */ 318 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 319 break; 320 321 /* Todo: Why is this here? Is it really needed? */ 322 PHY_RESET(sc); /* XXX hardware bug work-around */ 323 324 switch (IFM_SUBTYPE(ife->ifm_media)) { 325 case IFM_AUTO: 326 brgphy_mii_phy_auto(sc, ife->ifm_media); 327 break; 328 case IFM_2500_SX: 329 case IFM_1000_SX: 330 case IFM_1000_T: 331 case IFM_100_TX: 332 case IFM_10_T: 333 brgphy_setmedia(sc, ife->ifm_media); 334 break; 335 default: 336 return (EINVAL); 337 } 338 break; 339 case MII_TICK: 340 /* Bail if the interface isn't up. */ 341 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 342 return (0); 343 344 345 /* Bail if autoneg isn't in process. */ 346 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) { 347 sc->mii_ticks = 0; 348 break; 349 } 350 351 /* 352 * Check to see if we have link. If we do, we don't 353 * need to restart the autonegotiation process. 354 */ 355 val = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR); 356 if (val & BMSR_LINK) { 357 sc->mii_ticks = 0; /* Reset autoneg timer. */ 358 break; 359 } 360 361 /* Announce link loss right after it happens. */ 362 if (sc->mii_ticks++ == 0) 363 break; 364 365 /* Only retry autonegotiation every mii_anegticks seconds. */ 366 if (sc->mii_ticks <= sc->mii_anegticks) 367 break; 368 369 370 /* Retry autonegotiation */ 371 sc->mii_ticks = 0; 372 brgphy_mii_phy_auto(sc, ife->ifm_media); 373 break; 374 } 375 376 /* Update the media status. */ 377 PHY_STATUS(sc); 378 379 /* 380 * Callback if something changed. Note that we need to poke 381 * the DSP on the Broadcom PHYs if the media changes. 382 */ 383 if (sc->mii_media_active != mii->mii_media_active || 384 sc->mii_media_status != mii->mii_media_status || 385 cmd == MII_MEDIACHG) { 386 switch (sc->mii_mpd_oui) { 387 case MII_OUI_BROADCOM: 388 switch (sc->mii_mpd_model) { 389 case MII_MODEL_BROADCOM_BCM5400: 390 bcm5401_load_dspcode(sc); 391 break; 392 case MII_MODEL_BROADCOM_BCM5401: 393 if (sc->mii_mpd_rev == 1 || sc->mii_mpd_rev == 3) 394 bcm5401_load_dspcode(sc); 395 break; 396 case MII_MODEL_BROADCOM_BCM5411: 397 bcm5411_load_dspcode(sc); 398 break; 399 case MII_MODEL_BROADCOM_BCM54K2: 400 bcm54k2_load_dspcode(sc); 401 break; 402 } 403 break; 404 } 405 } 406 mii_phy_update(sc, cmd); 407 return (0); 408 } 409 410 /****************************************************************************/ 411 /* Sets the PHY link speed. */ 412 /* */ 413 /* Returns: */ 414 /* None */ 415 /****************************************************************************/ 416 static void 417 brgphy_setmedia(struct mii_softc *sc, int media) 418 { 419 int bmcr = 0, gig; 420 421 switch (IFM_SUBTYPE(media)) { 422 case IFM_2500_SX: 423 break; 424 case IFM_1000_SX: 425 case IFM_1000_T: 426 bmcr = BRGPHY_S1000; 427 break; 428 case IFM_100_TX: 429 bmcr = BRGPHY_S100; 430 break; 431 case IFM_10_T: 432 default: 433 bmcr = BRGPHY_S10; 434 break; 435 } 436 437 if ((media & IFM_FDX) != 0) { 438 bmcr |= BRGPHY_BMCR_FDX; 439 gig = BRGPHY_1000CTL_AFD; 440 } else { 441 gig = BRGPHY_1000CTL_AHD; 442 } 443 444 /* Force loopback to disconnect PHY from Ethernet medium. */ 445 brgphy_enable_loopback(sc); 446 447 PHY_WRITE(sc, BRGPHY_MII_1000CTL, 0); 448 PHY_WRITE(sc, BRGPHY_MII_ANAR, BRGPHY_SEL_TYPE); 449 450 if (IFM_SUBTYPE(media) != IFM_1000_T && 451 IFM_SUBTYPE(media) != IFM_1000_SX) { 452 PHY_WRITE(sc, BRGPHY_MII_BMCR, bmcr); 453 return; 454 } 455 456 if (IFM_SUBTYPE(media) == IFM_1000_T) { 457 gig |= BRGPHY_1000CTL_MSE; 458 if ((media & IFM_ETH_MASTER) != 0) 459 gig |= BRGPHY_1000CTL_MSC; 460 } 461 PHY_WRITE(sc, BRGPHY_MII_1000CTL, gig); 462 PHY_WRITE(sc, BRGPHY_MII_BMCR, 463 bmcr | BRGPHY_BMCR_AUTOEN | BRGPHY_BMCR_STARTNEG); 464 } 465 466 /****************************************************************************/ 467 /* Set the media status based on the PHY settings. */ 468 /* */ 469 /* Returns: */ 470 /* None */ 471 /****************************************************************************/ 472 static void 473 brgphy_status(struct mii_softc *sc) 474 { 475 struct brgphy_softc *bsc = (struct brgphy_softc *)sc; 476 struct mii_data *mii = sc->mii_pdata; 477 int aux, bmcr, bmsr, val, xstat; 478 u_int flowstat; 479 480 mii->mii_media_status = IFM_AVALID; 481 mii->mii_media_active = IFM_ETHER; 482 483 bmsr = PHY_READ(sc, BRGPHY_MII_BMSR) | PHY_READ(sc, BRGPHY_MII_BMSR); 484 bmcr = PHY_READ(sc, BRGPHY_MII_BMCR); 485 486 if (bmcr & BRGPHY_BMCR_LOOP) { 487 mii->mii_media_active |= IFM_LOOP; 488 } 489 490 if ((bmcr & BRGPHY_BMCR_AUTOEN) && 491 (bmsr & BRGPHY_BMSR_ACOMP) == 0 && 492 (bsc->serdes_flags & BRGPHY_NOANWAIT) == 0) { 493 /* Erg, still trying, I guess... */ 494 mii->mii_media_active |= IFM_NONE; 495 return; 496 } 497 498 if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { 499 /* 500 * NB: reading the ANAR, ANLPAR or 1000STS after the AUXSTS 501 * wedges at least the PHY of BCM5704 (but not others). 502 */ 503 flowstat = mii_phy_flowstatus(sc); 504 xstat = PHY_READ(sc, BRGPHY_MII_1000STS); 505 aux = PHY_READ(sc, BRGPHY_MII_AUXSTS); 506 507 /* If copper link is up, get the negotiated speed/duplex. */ 508 if (aux & BRGPHY_AUXSTS_LINK) { 509 mii->mii_media_status |= IFM_ACTIVE; 510 switch (aux & BRGPHY_AUXSTS_AN_RES) { 511 case BRGPHY_RES_1000FD: 512 mii->mii_media_active |= IFM_1000_T | IFM_FDX; break; 513 case BRGPHY_RES_1000HD: 514 mii->mii_media_active |= IFM_1000_T | IFM_HDX; break; 515 case BRGPHY_RES_100FD: 516 mii->mii_media_active |= IFM_100_TX | IFM_FDX; break; 517 case BRGPHY_RES_100T4: 518 mii->mii_media_active |= IFM_100_T4; break; 519 case BRGPHY_RES_100HD: 520 mii->mii_media_active |= IFM_100_TX | IFM_HDX; break; 521 case BRGPHY_RES_10FD: 522 mii->mii_media_active |= IFM_10_T | IFM_FDX; break; 523 case BRGPHY_RES_10HD: 524 mii->mii_media_active |= IFM_10_T | IFM_HDX; break; 525 default: 526 mii->mii_media_active |= IFM_NONE; break; 527 } 528 529 if ((mii->mii_media_active & IFM_FDX) != 0) 530 mii->mii_media_active |= flowstat; 531 532 if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T && 533 (xstat & BRGPHY_1000STS_MSR) != 0) 534 mii->mii_media_active |= IFM_ETH_MASTER; 535 } 536 } else { 537 /* Todo: Add support for flow control. */ 538 /* If serdes link is up, get the negotiated speed/duplex. */ 539 if (bmsr & BRGPHY_BMSR_LINK) { 540 mii->mii_media_status |= IFM_ACTIVE; 541 } 542 543 /* Check the link speed/duplex based on the PHY type. */ 544 if (bsc->serdes_flags & BRGPHY_5706S) { 545 mii->mii_media_active |= IFM_1000_SX; 546 547 /* If autoneg enabled, read negotiated duplex settings */ 548 if (bmcr & BRGPHY_BMCR_AUTOEN) { 549 val = PHY_READ(sc, BRGPHY_SERDES_ANAR) & PHY_READ(sc, BRGPHY_SERDES_ANLPAR); 550 if (val & BRGPHY_SERDES_ANAR_FDX) 551 mii->mii_media_active |= IFM_FDX; 552 else 553 mii->mii_media_active |= IFM_HDX; 554 } 555 } else if (bsc->serdes_flags & BRGPHY_5708S) { 556 PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG_PG0); 557 xstat = PHY_READ(sc, BRGPHY_5708S_PG0_1000X_STAT1); 558 559 /* Check for MRBE auto-negotiated speed results. */ 560 switch (xstat & BRGPHY_5708S_PG0_1000X_STAT1_SPEED_MASK) { 561 case BRGPHY_5708S_PG0_1000X_STAT1_SPEED_10: 562 mii->mii_media_active |= IFM_10_FL; break; 563 case BRGPHY_5708S_PG0_1000X_STAT1_SPEED_100: 564 mii->mii_media_active |= IFM_100_FX; break; 565 case BRGPHY_5708S_PG0_1000X_STAT1_SPEED_1G: 566 mii->mii_media_active |= IFM_1000_SX; break; 567 case BRGPHY_5708S_PG0_1000X_STAT1_SPEED_25G: 568 mii->mii_media_active |= IFM_2500_SX; break; 569 } 570 571 /* Check for MRBE auto-negotiated duplex results. */ 572 if (xstat & BRGPHY_5708S_PG0_1000X_STAT1_FDX) 573 mii->mii_media_active |= IFM_FDX; 574 else 575 mii->mii_media_active |= IFM_HDX; 576 } else if (bsc->serdes_flags & BRGPHY_5709S) { 577 /* Select GP Status Block of the AN MMD, get autoneg results. */ 578 PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_GP_STATUS); 579 xstat = PHY_READ(sc, BRGPHY_GP_STATUS_TOP_ANEG_STATUS); 580 581 /* Restore IEEE0 block (assumed in all brgphy(4) code). */ 582 PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_COMBO_IEEE0); 583 584 /* Check for MRBE auto-negotiated speed results. */ 585 switch (xstat & BRGPHY_GP_STATUS_TOP_ANEG_SPEED_MASK) { 586 case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_10: 587 mii->mii_media_active |= IFM_10_FL; break; 588 case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_100: 589 mii->mii_media_active |= IFM_100_FX; break; 590 case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_1G: 591 mii->mii_media_active |= IFM_1000_SX; break; 592 case BRGPHY_GP_STATUS_TOP_ANEG_SPEED_25G: 593 mii->mii_media_active |= IFM_2500_SX; break; 594 } 595 596 /* Check for MRBE auto-negotiated duplex results. */ 597 if (xstat & BRGPHY_GP_STATUS_TOP_ANEG_FDX) 598 mii->mii_media_active |= IFM_FDX; 599 else 600 mii->mii_media_active |= IFM_HDX; 601 } 602 } 603 } 604 605 static void 606 brgphy_mii_phy_auto(struct mii_softc *sc, int media) 607 { 608 int anar, ktcr = 0; 609 610 PHY_RESET(sc); 611 612 if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) { 613 anar = BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) | ANAR_CSMA; 614 if ((media & IFM_FLOW) != 0 || 615 (sc->mii_flags & MIIF_FORCEPAUSE) != 0) 616 anar |= BRGPHY_ANAR_PC | BRGPHY_ANAR_ASP; 617 PHY_WRITE(sc, BRGPHY_MII_ANAR, anar); 618 ktcr = BRGPHY_1000CTL_AFD | BRGPHY_1000CTL_AHD; 619 if (sc->mii_mpd_model == MII_MODEL_BROADCOM_BCM5701) 620 ktcr |= BRGPHY_1000CTL_MSE | BRGPHY_1000CTL_MSC; 621 PHY_WRITE(sc, BRGPHY_MII_1000CTL, ktcr); 622 PHY_READ(sc, BRGPHY_MII_1000CTL); 623 } else { 624 anar = BRGPHY_SERDES_ANAR_FDX | BRGPHY_SERDES_ANAR_HDX; 625 if ((media & IFM_FLOW) != 0 || 626 (sc->mii_flags & MIIF_FORCEPAUSE) != 0) 627 anar |= BRGPHY_SERDES_ANAR_BOTH_PAUSE; 628 PHY_WRITE(sc, BRGPHY_SERDES_ANAR, anar); 629 } 630 631 PHY_WRITE(sc, BRGPHY_MII_BMCR, BRGPHY_BMCR_AUTOEN | 632 BRGPHY_BMCR_STARTNEG); 633 PHY_WRITE(sc, BRGPHY_MII_IMR, 0xFF00); 634 } 635 636 /* Enable loopback to force the link down. */ 637 static void 638 brgphy_enable_loopback(struct mii_softc *sc) 639 { 640 int i; 641 642 PHY_WRITE(sc, BRGPHY_MII_BMCR, BRGPHY_BMCR_LOOP); 643 for (i = 0; i < 15000; i++) { 644 if (!(PHY_READ(sc, BRGPHY_MII_BMSR) & BRGPHY_BMSR_LINK)) 645 break; 646 DELAY(10); 647 } 648 } 649 650 /* Turn off tap power management on 5401. */ 651 static void 652 bcm5401_load_dspcode(struct mii_softc *sc) 653 { 654 static const struct { 655 int reg; 656 uint16_t val; 657 } dspcode[] = { 658 { BRGPHY_MII_AUXCTL, 0x0c20 }, 659 { BRGPHY_MII_DSP_ADDR_REG, 0x0012 }, 660 { BRGPHY_MII_DSP_RW_PORT, 0x1804 }, 661 { BRGPHY_MII_DSP_ADDR_REG, 0x0013 }, 662 { BRGPHY_MII_DSP_RW_PORT, 0x1204 }, 663 { BRGPHY_MII_DSP_ADDR_REG, 0x8006 }, 664 { BRGPHY_MII_DSP_RW_PORT, 0x0132 }, 665 { BRGPHY_MII_DSP_ADDR_REG, 0x8006 }, 666 { BRGPHY_MII_DSP_RW_PORT, 0x0232 }, 667 { BRGPHY_MII_DSP_ADDR_REG, 0x201f }, 668 { BRGPHY_MII_DSP_RW_PORT, 0x0a20 }, 669 { 0, 0 }, 670 }; 671 int i; 672 673 for (i = 0; dspcode[i].reg != 0; i++) 674 PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val); 675 DELAY(40); 676 } 677 678 static void 679 bcm5411_load_dspcode(struct mii_softc *sc) 680 { 681 static const struct { 682 int reg; 683 uint16_t val; 684 } dspcode[] = { 685 { 0x1c, 0x8c23 }, 686 { 0x1c, 0x8ca3 }, 687 { 0x1c, 0x8c23 }, 688 { 0, 0 }, 689 }; 690 int i; 691 692 for (i = 0; dspcode[i].reg != 0; i++) 693 PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val); 694 } 695 696 void 697 bcm54k2_load_dspcode(struct mii_softc *sc) 698 { 699 static const struct { 700 int reg; 701 uint16_t val; 702 } dspcode[] = { 703 { 4, 0x01e1 }, 704 { 9, 0x0300 }, 705 { 0, 0 }, 706 }; 707 int i; 708 709 for (i = 0; dspcode[i].reg != 0; i++) 710 PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val); 711 712 } 713 714 static void 715 brgphy_fixup_5704_a0_bug(struct mii_softc *sc) 716 { 717 static const struct { 718 int reg; 719 uint16_t val; 720 } dspcode[] = { 721 { 0x1c, 0x8d68 }, 722 { 0x1c, 0x8d68 }, 723 { 0, 0 }, 724 }; 725 int i; 726 727 for (i = 0; dspcode[i].reg != 0; i++) 728 PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val); 729 } 730 731 static void 732 brgphy_fixup_adc_bug(struct mii_softc *sc) 733 { 734 static const struct { 735 int reg; 736 uint16_t val; 737 } dspcode[] = { 738 { BRGPHY_MII_AUXCTL, 0x0c00 }, 739 { BRGPHY_MII_DSP_ADDR_REG, 0x201f }, 740 { BRGPHY_MII_DSP_RW_PORT, 0x2aaa }, 741 { 0, 0 }, 742 }; 743 int i; 744 745 for (i = 0; dspcode[i].reg != 0; i++) 746 PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val); 747 } 748 749 static void 750 brgphy_fixup_adjust_trim(struct mii_softc *sc) 751 { 752 static const struct { 753 int reg; 754 uint16_t val; 755 } dspcode[] = { 756 { BRGPHY_MII_AUXCTL, 0x0c00 }, 757 { BRGPHY_MII_DSP_ADDR_REG, 0x000a }, 758 { BRGPHY_MII_DSP_RW_PORT, 0x110b }, 759 { BRGPHY_MII_TEST1, 0x0014 }, 760 { BRGPHY_MII_AUXCTL, 0x0400 }, 761 { 0, 0 }, 762 }; 763 int i; 764 765 for (i = 0; dspcode[i].reg != 0; i++) 766 PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val); 767 } 768 769 static void 770 brgphy_fixup_ber_bug(struct mii_softc *sc) 771 { 772 static const struct { 773 int reg; 774 uint16_t val; 775 } dspcode[] = { 776 { BRGPHY_MII_AUXCTL, 0x0c00 }, 777 { BRGPHY_MII_DSP_ADDR_REG, 0x000a }, 778 { BRGPHY_MII_DSP_RW_PORT, 0x310b }, 779 { BRGPHY_MII_DSP_ADDR_REG, 0x201f }, 780 { BRGPHY_MII_DSP_RW_PORT, 0x9506 }, 781 { BRGPHY_MII_DSP_ADDR_REG, 0x401f }, 782 { BRGPHY_MII_DSP_RW_PORT, 0x14e2 }, 783 { BRGPHY_MII_AUXCTL, 0x0400 }, 784 { 0, 0 }, 785 }; 786 int i; 787 788 for (i = 0; dspcode[i].reg != 0; i++) 789 PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val); 790 } 791 792 static void 793 brgphy_fixup_crc_bug(struct mii_softc *sc) 794 { 795 static const struct { 796 int reg; 797 uint16_t val; 798 } dspcode[] = { 799 { BRGPHY_MII_DSP_RW_PORT, 0x0a75 }, 800 { 0x1c, 0x8c68 }, 801 { 0x1c, 0x8d68 }, 802 { 0x1c, 0x8c68 }, 803 { 0, 0 }, 804 }; 805 int i; 806 807 for (i = 0; dspcode[i].reg != 0; i++) 808 PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val); 809 } 810 811 static void 812 brgphy_fixup_jitter_bug(struct mii_softc *sc) 813 { 814 static const struct { 815 int reg; 816 uint16_t val; 817 } dspcode[] = { 818 { BRGPHY_MII_AUXCTL, 0x0c00 }, 819 { BRGPHY_MII_DSP_ADDR_REG, 0x000a }, 820 { BRGPHY_MII_DSP_RW_PORT, 0x010b }, 821 { BRGPHY_MII_AUXCTL, 0x0400 }, 822 { 0, 0 }, 823 }; 824 int i; 825 826 for (i = 0; dspcode[i].reg != 0; i++) 827 PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val); 828 } 829 830 static void 831 brgphy_fixup_disable_early_dac(struct mii_softc *sc) 832 { 833 uint32_t val; 834 835 PHY_WRITE(sc, BRGPHY_MII_DSP_ADDR_REG, 0x0f08); 836 val = PHY_READ(sc, BRGPHY_MII_DSP_RW_PORT); 837 val &= ~(1 << 8); 838 PHY_WRITE(sc, BRGPHY_MII_DSP_RW_PORT, val); 839 840 } 841 842 static void 843 brgphy_ethernet_wirespeed(struct mii_softc *sc) 844 { 845 uint32_t val; 846 847 /* Enable Ethernet@WireSpeed. */ 848 PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7007); 849 val = PHY_READ(sc, BRGPHY_MII_AUXCTL); 850 PHY_WRITE(sc, BRGPHY_MII_AUXCTL, val | (1 << 15) | (1 << 4)); 851 } 852 853 static void 854 brgphy_jumbo_settings(struct mii_softc *sc, u_long mtu) 855 { 856 uint32_t val; 857 858 /* Set or clear jumbo frame settings in the PHY. */ 859 if (mtu > ETHER_MAX_LEN) { 860 if (sc->mii_mpd_model == MII_MODEL_BROADCOM_BCM5401) { 861 /* BCM5401 PHY cannot read-modify-write. */ 862 PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x4c20); 863 } else { 864 PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7); 865 val = PHY_READ(sc, BRGPHY_MII_AUXCTL); 866 PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 867 val | BRGPHY_AUXCTL_LONG_PKT); 868 } 869 870 val = PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL); 871 PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL, 872 val | BRGPHY_PHY_EXTCTL_HIGH_LA); 873 } else { 874 PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7); 875 val = PHY_READ(sc, BRGPHY_MII_AUXCTL); 876 PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 877 val & ~(BRGPHY_AUXCTL_LONG_PKT | 0x7)); 878 879 val = PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL); 880 PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL, 881 val & ~BRGPHY_PHY_EXTCTL_HIGH_LA); 882 } 883 } 884 885 static void 886 brgphy_reset(struct mii_softc *sc) 887 { 888 struct bge_softc *bge_sc = NULL; 889 struct bce_softc *bce_sc = NULL; 890 struct ifnet *ifp; 891 int i, val; 892 893 /* 894 * Perform a reset. Note that at least some Broadcom PHYs default to 895 * being powered down as well as isolated after a reset but don't work 896 * if one or both of these bits are cleared. However, they just work 897 * fine if both bits remain set, so we don't use mii_phy_reset() here. 898 */ 899 PHY_WRITE(sc, BRGPHY_MII_BMCR, BRGPHY_BMCR_RESET); 900 901 /* Wait 100ms for it to complete. */ 902 for (i = 0; i < 100; i++) { 903 if ((PHY_READ(sc, BRGPHY_MII_BMCR) & BRGPHY_BMCR_RESET) == 0) 904 break; 905 DELAY(1000); 906 } 907 908 /* Handle any PHY specific procedures following the reset. */ 909 switch (sc->mii_mpd_oui) { 910 case MII_OUI_BROADCOM: 911 switch (sc->mii_mpd_model) { 912 case MII_MODEL_BROADCOM_BCM5400: 913 bcm5401_load_dspcode(sc); 914 break; 915 case MII_MODEL_BROADCOM_BCM5401: 916 if (sc->mii_mpd_rev == 1 || sc->mii_mpd_rev == 3) 917 bcm5401_load_dspcode(sc); 918 break; 919 case MII_MODEL_BROADCOM_BCM5411: 920 bcm5411_load_dspcode(sc); 921 break; 922 case MII_MODEL_BROADCOM_BCM54K2: 923 bcm54k2_load_dspcode(sc); 924 break; 925 } 926 break; 927 case MII_OUI_BROADCOM3: 928 switch (sc->mii_mpd_model) { 929 case MII_MODEL_BROADCOM3_BCM5717C: 930 case MII_MODEL_BROADCOM3_BCM5719C: 931 case MII_MODEL_BROADCOM3_BCM5720C: 932 case MII_MODEL_BROADCOM3_BCM57765: 933 return; 934 } 935 break; 936 case MII_OUI_BROADCOM4: 937 return; 938 } 939 940 ifp = sc->mii_pdata->mii_ifp; 941 942 /* Find the driver associated with this PHY. */ 943 if (strcmp(ifp->if_dname, "bge") == 0) { 944 bge_sc = ifp->if_softc; 945 } else if (strcmp(ifp->if_dname, "bce") == 0) { 946 bce_sc = ifp->if_softc; 947 } 948 949 if (bge_sc) { 950 /* Fix up various bugs */ 951 if (bge_sc->bge_phy_flags & BGE_PHY_5704_A0_BUG) 952 brgphy_fixup_5704_a0_bug(sc); 953 if (bge_sc->bge_phy_flags & BGE_PHY_ADC_BUG) 954 brgphy_fixup_adc_bug(sc); 955 if (bge_sc->bge_phy_flags & BGE_PHY_ADJUST_TRIM) 956 brgphy_fixup_adjust_trim(sc); 957 if (bge_sc->bge_phy_flags & BGE_PHY_BER_BUG) 958 brgphy_fixup_ber_bug(sc); 959 if (bge_sc->bge_phy_flags & BGE_PHY_CRC_BUG) 960 brgphy_fixup_crc_bug(sc); 961 if (bge_sc->bge_phy_flags & BGE_PHY_JITTER_BUG) 962 brgphy_fixup_jitter_bug(sc); 963 964 if (bge_sc->bge_flags & BGE_FLAG_JUMBO) 965 brgphy_jumbo_settings(sc, ifp->if_mtu); 966 967 if ((bge_sc->bge_phy_flags & BGE_PHY_NO_WIRESPEED) == 0) 968 brgphy_ethernet_wirespeed(sc); 969 970 /* Enable Link LED on Dell boxes */ 971 if (bge_sc->bge_phy_flags & BGE_PHY_NO_3LED) { 972 PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL, 973 PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL) & 974 ~BRGPHY_PHY_EXTCTL_3_LED); 975 } 976 977 /* Adjust output voltage (From Linux driver) */ 978 if (bge_sc->bge_asicrev == BGE_ASICREV_BCM5906) 979 PHY_WRITE(sc, BRGPHY_MII_EPHY_PTEST, 0x12); 980 } else if (bce_sc) { 981 if (BCE_CHIP_NUM(bce_sc) == BCE_CHIP_NUM_5708 && 982 (bce_sc->bce_phy_flags & BCE_PHY_SERDES_FLAG)) { 983 984 /* Store autoneg capabilities/results in digital block (Page 0) */ 985 PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG3_PG2); 986 PHY_WRITE(sc, BRGPHY_5708S_PG2_DIGCTL_3_0, 987 BRGPHY_5708S_PG2_DIGCTL_3_0_USE_IEEE); 988 PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, BRGPHY_5708S_DIG_PG0); 989 990 /* Enable fiber mode and autodetection */ 991 PHY_WRITE(sc, BRGPHY_5708S_PG0_1000X_CTL1, 992 PHY_READ(sc, BRGPHY_5708S_PG0_1000X_CTL1) | 993 BRGPHY_5708S_PG0_1000X_CTL1_AUTODET_EN | 994 BRGPHY_5708S_PG0_1000X_CTL1_FIBER_MODE); 995 996 /* Enable parallel detection */ 997 PHY_WRITE(sc, BRGPHY_5708S_PG0_1000X_CTL2, 998 PHY_READ(sc, BRGPHY_5708S_PG0_1000X_CTL2) | 999 BRGPHY_5708S_PG0_1000X_CTL2_PAR_DET_EN); 1000 1001 /* Advertise 2.5G support through next page during autoneg */ 1002 if (bce_sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG) 1003 PHY_WRITE(sc, BRGPHY_5708S_ANEG_NXT_PG_XMIT1, 1004 PHY_READ(sc, BRGPHY_5708S_ANEG_NXT_PG_XMIT1) | 1005 BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G); 1006 1007 /* Increase TX signal amplitude */ 1008 if ((BCE_CHIP_ID(bce_sc) == BCE_CHIP_ID_5708_A0) || 1009 (BCE_CHIP_ID(bce_sc) == BCE_CHIP_ID_5708_B0) || 1010 (BCE_CHIP_ID(bce_sc) == BCE_CHIP_ID_5708_B1)) { 1011 PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, 1012 BRGPHY_5708S_TX_MISC_PG5); 1013 PHY_WRITE(sc, BRGPHY_5708S_PG5_TXACTL1, 1014 PHY_READ(sc, BRGPHY_5708S_PG5_TXACTL1) & ~0x30); 1015 PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, 1016 BRGPHY_5708S_DIG_PG0); 1017 } 1018 1019 /* Backplanes use special driver/pre-driver/pre-emphasis values. */ 1020 if ((bce_sc->bce_shared_hw_cfg & BCE_SHARED_HW_CFG_PHY_BACKPLANE) && 1021 (bce_sc->bce_port_hw_cfg & BCE_PORT_HW_CFG_CFG_TXCTL3_MASK)) { 1022 PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, 1023 BRGPHY_5708S_TX_MISC_PG5); 1024 PHY_WRITE(sc, BRGPHY_5708S_PG5_TXACTL3, 1025 bce_sc->bce_port_hw_cfg & 1026 BCE_PORT_HW_CFG_CFG_TXCTL3_MASK); 1027 PHY_WRITE(sc, BRGPHY_5708S_BLOCK_ADDR, 1028 BRGPHY_5708S_DIG_PG0); 1029 } 1030 } else if (BCE_CHIP_NUM(bce_sc) == BCE_CHIP_NUM_5709 && 1031 (bce_sc->bce_phy_flags & BCE_PHY_SERDES_FLAG)) { 1032 1033 /* Select the SerDes Digital block of the AN MMD. */ 1034 PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_SERDES_DIG); 1035 val = PHY_READ(sc, BRGPHY_SERDES_DIG_1000X_CTL1); 1036 val &= ~BRGPHY_SD_DIG_1000X_CTL1_AUTODET; 1037 val |= BRGPHY_SD_DIG_1000X_CTL1_FIBER; 1038 PHY_WRITE(sc, BRGPHY_SERDES_DIG_1000X_CTL1, val); 1039 1040 /* Select the Over 1G block of the AN MMD. */ 1041 PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_OVER_1G); 1042 1043 /* Enable autoneg "Next Page" to advertise 2.5G support. */ 1044 val = PHY_READ(sc, BRGPHY_OVER_1G_UNFORMAT_PG1); 1045 if (bce_sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG) 1046 val |= BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G; 1047 else 1048 val &= ~BRGPHY_5708S_ANEG_NXT_PG_XMIT1_25G; 1049 PHY_WRITE(sc, BRGPHY_OVER_1G_UNFORMAT_PG1, val); 1050 1051 /* Select the Multi-Rate Backplane Ethernet block of the AN MMD. */ 1052 PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_MRBE); 1053 1054 /* Enable MRBE speed autoneg. */ 1055 val = PHY_READ(sc, BRGPHY_MRBE_MSG_PG5_NP); 1056 val |= BRGPHY_MRBE_MSG_PG5_NP_MBRE | 1057 BRGPHY_MRBE_MSG_PG5_NP_T2; 1058 PHY_WRITE(sc, BRGPHY_MRBE_MSG_PG5_NP, val); 1059 1060 /* Select the Clause 73 User B0 block of the AN MMD. */ 1061 PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_CL73_USER_B0); 1062 1063 /* Enable MRBE speed autoneg. */ 1064 PHY_WRITE(sc, BRGPHY_CL73_USER_B0_MBRE_CTL1, 1065 BRGPHY_CL73_USER_B0_MBRE_CTL1_NP_AFT_BP | 1066 BRGPHY_CL73_USER_B0_MBRE_CTL1_STA_MGR | 1067 BRGPHY_CL73_USER_B0_MBRE_CTL1_ANEG); 1068 1069 /* Restore IEEE0 block (assumed in all brgphy(4) code). */ 1070 PHY_WRITE(sc, BRGPHY_BLOCK_ADDR, BRGPHY_BLOCK_ADDR_COMBO_IEEE0); 1071 } else if (BCE_CHIP_NUM(bce_sc) == BCE_CHIP_NUM_5709) { 1072 if ((BCE_CHIP_REV(bce_sc) == BCE_CHIP_REV_Ax) || 1073 (BCE_CHIP_REV(bce_sc) == BCE_CHIP_REV_Bx)) 1074 brgphy_fixup_disable_early_dac(sc); 1075 1076 brgphy_jumbo_settings(sc, ifp->if_mtu); 1077 brgphy_ethernet_wirespeed(sc); 1078 } else { 1079 brgphy_fixup_ber_bug(sc); 1080 brgphy_jumbo_settings(sc, ifp->if_mtu); 1081 brgphy_ethernet_wirespeed(sc); 1082 } 1083 } 1084 } 1085