1 /* $FreeBSD$ */ 2 /*- 3 * SPDX-License-Identifier: BSD-2-Clause 4 * 5 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #ifdef USB_GLOBAL_INCLUDE_FILE 30 #include USB_GLOBAL_INCLUDE_FILE 31 #else 32 #include "opt_ddb.h" 33 34 #include <sys/stdint.h> 35 #include <sys/stddef.h> 36 #include <sys/param.h> 37 #include <sys/queue.h> 38 #include <sys/types.h> 39 #include <sys/systm.h> 40 #include <sys/kernel.h> 41 #include <sys/bus.h> 42 #include <sys/module.h> 43 #include <sys/lock.h> 44 #include <sys/mutex.h> 45 #include <sys/condvar.h> 46 #include <sys/sysctl.h> 47 #include <sys/sx.h> 48 #include <sys/unistd.h> 49 #include <sys/callout.h> 50 #include <sys/malloc.h> 51 #include <sys/priv.h> 52 53 #include <dev/usb/usb.h> 54 #include <dev/usb/usbdi.h> 55 56 #define USB_DEBUG_VAR usb_ctrl_debug 57 58 #include <dev/usb/usb_core.h> 59 #include <dev/usb/usb_debug.h> 60 #include <dev/usb/usb_process.h> 61 #include <dev/usb/usb_busdma.h> 62 #include <dev/usb/usb_dynamic.h> 63 #include <dev/usb/usb_device.h> 64 #include <dev/usb/usb_dev.h> 65 #include <dev/usb/usb_hub.h> 66 67 #include <dev/usb/usb_controller.h> 68 #include <dev/usb/usb_bus.h> 69 #include <dev/usb/usb_pf.h> 70 #include "usb_if.h" 71 #endif /* USB_GLOBAL_INCLUDE_FILE */ 72 73 /* function prototypes */ 74 75 static device_probe_t usb_probe; 76 static device_attach_t usb_attach; 77 static device_detach_t usb_detach; 78 static device_suspend_t usb_suspend; 79 static device_resume_t usb_resume; 80 static device_shutdown_t usb_shutdown; 81 82 static void usb_attach_sub(device_t, struct usb_bus *); 83 84 /* static variables */ 85 86 #ifdef USB_DEBUG 87 static int usb_ctrl_debug = 0; 88 89 static SYSCTL_NODE(_hw_usb, OID_AUTO, ctrl, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 90 "USB controller"); 91 SYSCTL_INT(_hw_usb_ctrl, OID_AUTO, debug, CTLFLAG_RWTUN, &usb_ctrl_debug, 0, 92 "Debug level"); 93 #endif 94 95 #if USB_HAVE_ROOT_MOUNT_HOLD 96 static int usb_no_boot_wait = 0; 97 SYSCTL_INT(_hw_usb, OID_AUTO, no_boot_wait, CTLFLAG_RDTUN, &usb_no_boot_wait, 0, 98 "No USB device enumerate waiting at boot."); 99 #endif 100 101 static int usb_no_suspend_wait = 0; 102 SYSCTL_INT(_hw_usb, OID_AUTO, no_suspend_wait, CTLFLAG_RWTUN, 103 &usb_no_suspend_wait, 0, "No USB device waiting at system suspend."); 104 105 static int usb_no_shutdown_wait = 0; 106 SYSCTL_INT(_hw_usb, OID_AUTO, no_shutdown_wait, CTLFLAG_RWTUN, 107 &usb_no_shutdown_wait, 0, "No USB device waiting at system shutdown."); 108 109 static device_method_t usb_methods[] = { 110 DEVMETHOD(device_probe, usb_probe), 111 DEVMETHOD(device_attach, usb_attach), 112 DEVMETHOD(device_detach, usb_detach), 113 DEVMETHOD(device_suspend, usb_suspend), 114 DEVMETHOD(device_resume, usb_resume), 115 DEVMETHOD(device_shutdown, usb_shutdown), 116 117 DEVMETHOD_END 118 }; 119 120 static driver_t usb_driver = { 121 .name = "usbus", 122 .methods = usb_methods, 123 .size = 0, 124 }; 125 126 /* Host Only Drivers */ 127 DRIVER_MODULE(usbus, ohci, usb_driver, 0, 0); 128 DRIVER_MODULE(usbus, uhci, usb_driver, 0, 0); 129 DRIVER_MODULE(usbus, ehci, usb_driver, 0, 0); 130 DRIVER_MODULE(usbus, xhci, usb_driver, 0, 0); 131 132 /* Device Only Drivers */ 133 DRIVER_MODULE(usbus, musbotg, usb_driver, 0, 0); 134 DRIVER_MODULE(usbus, uss820dci, usb_driver, 0, 0); 135 DRIVER_MODULE(usbus, octusb, usb_driver, 0, 0); 136 137 /* Dual Mode Drivers */ 138 DRIVER_MODULE(usbus, dwcotg, usb_driver, 0, 0); 139 DRIVER_MODULE(usbus, saf1761otg, usb_driver, 0, 0); 140 141 /*------------------------------------------------------------------------* 142 * usb_probe 143 * 144 * This function is called from "{ehci,ohci,uhci}_pci_attach()". 145 *------------------------------------------------------------------------*/ 146 static int 147 usb_probe(device_t dev) 148 { 149 DPRINTF("\n"); 150 return (0); 151 } 152 153 #if USB_HAVE_ROOT_MOUNT_HOLD 154 static void 155 usb_root_mount_rel(struct usb_bus *bus) 156 { 157 if (bus->bus_roothold != NULL) { 158 DPRINTF("Releasing root mount hold %p\n", bus->bus_roothold); 159 root_mount_rel(bus->bus_roothold); 160 bus->bus_roothold = NULL; 161 } 162 } 163 #endif 164 165 /*------------------------------------------------------------------------* 166 * usb_attach 167 *------------------------------------------------------------------------*/ 168 static int 169 usb_attach(device_t dev) 170 { 171 struct usb_bus *bus = device_get_ivars(dev); 172 173 DPRINTF("\n"); 174 175 if (bus == NULL) { 176 device_printf(dev, "USB device has no ivars\n"); 177 return (ENXIO); 178 } 179 180 #if USB_HAVE_ROOT_MOUNT_HOLD 181 if (usb_no_boot_wait == 0) { 182 /* delay vfs_mountroot until the bus is explored */ 183 bus->bus_roothold = root_mount_hold(device_get_nameunit(dev)); 184 } 185 #endif 186 usb_attach_sub(dev, bus); 187 188 return (0); /* return success */ 189 } 190 191 /*------------------------------------------------------------------------* 192 * usb_detach 193 *------------------------------------------------------------------------*/ 194 static int 195 usb_detach(device_t dev) 196 { 197 struct usb_bus *bus = device_get_softc(dev); 198 199 DPRINTF("\n"); 200 201 if (bus == NULL) { 202 /* was never setup properly */ 203 return (0); 204 } 205 /* Stop power watchdog */ 206 usb_callout_drain(&bus->power_wdog); 207 208 #if USB_HAVE_ROOT_MOUNT_HOLD 209 /* Let the USB explore process detach all devices. */ 210 usb_root_mount_rel(bus); 211 #endif 212 213 USB_BUS_LOCK(bus); 214 215 /* Queue detach job */ 216 usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 217 &bus->detach_msg[0], &bus->detach_msg[1]); 218 219 /* Wait for detach to complete */ 220 usb_proc_mwait(USB_BUS_EXPLORE_PROC(bus), 221 &bus->detach_msg[0], &bus->detach_msg[1]); 222 223 #if USB_HAVE_UGEN 224 /* Wait for cleanup to complete */ 225 usb_proc_mwait(USB_BUS_EXPLORE_PROC(bus), 226 &bus->cleanup_msg[0], &bus->cleanup_msg[1]); 227 #endif 228 USB_BUS_UNLOCK(bus); 229 230 #if USB_HAVE_PER_BUS_PROCESS 231 /* Get rid of USB callback processes */ 232 233 usb_proc_free(USB_BUS_GIANT_PROC(bus)); 234 usb_proc_free(USB_BUS_NON_GIANT_ISOC_PROC(bus)); 235 usb_proc_free(USB_BUS_NON_GIANT_BULK_PROC(bus)); 236 237 /* Get rid of USB explore process */ 238 239 usb_proc_free(USB_BUS_EXPLORE_PROC(bus)); 240 241 /* Get rid of control transfer process */ 242 243 usb_proc_free(USB_BUS_CONTROL_XFER_PROC(bus)); 244 #endif 245 246 #if USB_HAVE_PF 247 usbpf_detach(bus); 248 #endif 249 return (0); 250 } 251 252 /*------------------------------------------------------------------------* 253 * usb_suspend 254 *------------------------------------------------------------------------*/ 255 static int 256 usb_suspend(device_t dev) 257 { 258 struct usb_bus *bus = device_get_softc(dev); 259 260 DPRINTF("\n"); 261 262 if (bus == NULL) { 263 /* was never setup properly */ 264 return (0); 265 } 266 267 USB_BUS_LOCK(bus); 268 usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 269 &bus->suspend_msg[0], &bus->suspend_msg[1]); 270 if (usb_no_suspend_wait == 0) { 271 /* wait for suspend callback to be executed */ 272 usb_proc_mwait(USB_BUS_EXPLORE_PROC(bus), 273 &bus->suspend_msg[0], &bus->suspend_msg[1]); 274 } 275 USB_BUS_UNLOCK(bus); 276 277 return (0); 278 } 279 280 /*------------------------------------------------------------------------* 281 * usb_resume 282 *------------------------------------------------------------------------*/ 283 static int 284 usb_resume(device_t dev) 285 { 286 struct usb_bus *bus = device_get_softc(dev); 287 288 DPRINTF("\n"); 289 290 if (bus == NULL) { 291 /* was never setup properly */ 292 return (0); 293 } 294 295 USB_BUS_LOCK(bus); 296 usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 297 &bus->resume_msg[0], &bus->resume_msg[1]); 298 USB_BUS_UNLOCK(bus); 299 300 return (0); 301 } 302 303 /*------------------------------------------------------------------------* 304 * usb_bus_reset_async_locked 305 *------------------------------------------------------------------------*/ 306 void 307 usb_bus_reset_async_locked(struct usb_bus *bus) 308 { 309 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 310 311 DPRINTF("\n"); 312 313 if (bus->reset_msg[0].hdr.pm_qentry.tqe_prev != NULL || 314 bus->reset_msg[1].hdr.pm_qentry.tqe_prev != NULL) { 315 DPRINTF("Reset already pending\n"); 316 return; 317 } 318 319 device_printf(bus->parent, "Resetting controller\n"); 320 321 usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 322 &bus->reset_msg[0], &bus->reset_msg[1]); 323 } 324 325 /*------------------------------------------------------------------------* 326 * usb_shutdown 327 *------------------------------------------------------------------------*/ 328 static int 329 usb_shutdown(device_t dev) 330 { 331 struct usb_bus *bus = device_get_softc(dev); 332 333 DPRINTF("\n"); 334 335 if (bus == NULL) { 336 /* was never setup properly */ 337 return (0); 338 } 339 340 DPRINTF("%s: Controller shutdown\n", device_get_nameunit(bus->bdev)); 341 342 USB_BUS_LOCK(bus); 343 usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 344 &bus->shutdown_msg[0], &bus->shutdown_msg[1]); 345 if (usb_no_shutdown_wait == 0) { 346 /* wait for shutdown callback to be executed */ 347 usb_proc_mwait(USB_BUS_EXPLORE_PROC(bus), 348 &bus->shutdown_msg[0], &bus->shutdown_msg[1]); 349 } 350 USB_BUS_UNLOCK(bus); 351 352 DPRINTF("%s: Controller shutdown complete\n", 353 device_get_nameunit(bus->bdev)); 354 355 return (0); 356 } 357 358 /*------------------------------------------------------------------------* 359 * usb_bus_explore 360 * 361 * This function is used to explore the device tree from the root. 362 *------------------------------------------------------------------------*/ 363 static void 364 usb_bus_explore(struct usb_proc_msg *pm) 365 { 366 struct usb_bus *bus; 367 struct usb_device *udev; 368 369 bus = ((struct usb_bus_msg *)pm)->bus; 370 udev = bus->devices[USB_ROOT_HUB_ADDR]; 371 372 if (bus->no_explore != 0) 373 return; 374 375 if (udev != NULL) { 376 USB_BUS_UNLOCK(bus); 377 uhub_explore_handle_re_enumerate(udev); 378 USB_BUS_LOCK(bus); 379 } 380 381 if (udev != NULL && udev->hub != NULL) { 382 if (bus->do_probe) { 383 bus->do_probe = 0; 384 bus->driver_added_refcount++; 385 } 386 if (bus->driver_added_refcount == 0) { 387 /* avoid zero, hence that is memory default */ 388 bus->driver_added_refcount = 1; 389 } 390 391 #ifdef DDB 392 /* 393 * The following three lines of code are only here to 394 * recover from DDB: 395 */ 396 usb_proc_rewakeup(USB_BUS_CONTROL_XFER_PROC(bus)); 397 usb_proc_rewakeup(USB_BUS_GIANT_PROC(bus)); 398 usb_proc_rewakeup(USB_BUS_NON_GIANT_ISOC_PROC(bus)); 399 usb_proc_rewakeup(USB_BUS_NON_GIANT_BULK_PROC(bus)); 400 #endif 401 402 USB_BUS_UNLOCK(bus); 403 404 #if USB_HAVE_POWERD 405 /* 406 * First update the USB power state! 407 */ 408 usb_bus_powerd(bus); 409 #endif 410 /* Explore the Root USB HUB. */ 411 (udev->hub->explore) (udev); 412 USB_BUS_LOCK(bus); 413 } 414 #if USB_HAVE_ROOT_MOUNT_HOLD 415 usb_root_mount_rel(bus); 416 #endif 417 418 /* Nice the enumeration a bit, to avoid looping too fast. */ 419 usb_pause_mtx(&bus->bus_mtx, USB_MS_TO_TICKS(usb_enum_nice_time)); 420 } 421 422 /*------------------------------------------------------------------------* 423 * usb_bus_detach 424 * 425 * This function is used to detach the device tree from the root. 426 *------------------------------------------------------------------------*/ 427 static void 428 usb_bus_detach(struct usb_proc_msg *pm) 429 { 430 struct usb_bus *bus; 431 struct usb_device *udev; 432 device_t dev; 433 434 bus = ((struct usb_bus_msg *)pm)->bus; 435 udev = bus->devices[USB_ROOT_HUB_ADDR]; 436 dev = bus->bdev; 437 /* clear the softc */ 438 device_set_softc(dev, NULL); 439 USB_BUS_UNLOCK(bus); 440 441 /* detach children first */ 442 bus_topo_lock(); 443 bus_generic_detach(dev); 444 bus_topo_unlock(); 445 446 /* 447 * Free USB device and all subdevices, if any. 448 */ 449 usb_free_device(udev, 0); 450 451 USB_BUS_LOCK(bus); 452 /* clear bdev variable last */ 453 bus->bdev = NULL; 454 } 455 456 /*------------------------------------------------------------------------* 457 * usb_bus_suspend 458 * 459 * This function is used to suspend the USB controller. 460 *------------------------------------------------------------------------*/ 461 static void 462 usb_bus_suspend(struct usb_proc_msg *pm) 463 { 464 struct usb_bus *bus; 465 struct usb_device *udev; 466 usb_error_t err; 467 uint8_t do_unlock; 468 469 DPRINTF("\n"); 470 471 bus = ((struct usb_bus_msg *)pm)->bus; 472 udev = bus->devices[USB_ROOT_HUB_ADDR]; 473 474 if (udev == NULL || bus->bdev == NULL) 475 return; 476 477 USB_BUS_UNLOCK(bus); 478 479 /* 480 * We use the shutdown event here because the suspend and 481 * resume events are reserved for the USB port suspend and 482 * resume. The USB system suspend is implemented like full 483 * shutdown and all connected USB devices will be disconnected 484 * subsequently. At resume all USB devices will be 485 * re-connected again. 486 */ 487 488 bus_generic_shutdown(bus->bdev); 489 490 do_unlock = usbd_enum_lock(udev); 491 492 err = usbd_set_config_index(udev, USB_UNCONFIG_INDEX); 493 if (err) 494 device_printf(bus->bdev, "Could not unconfigure root HUB\n"); 495 496 USB_BUS_LOCK(bus); 497 bus->hw_power_state = 0; 498 bus->no_explore = 1; 499 USB_BUS_UNLOCK(bus); 500 501 if (bus->methods->set_hw_power != NULL) 502 (bus->methods->set_hw_power) (bus); 503 504 if (bus->methods->set_hw_power_sleep != NULL) 505 (bus->methods->set_hw_power_sleep) (bus, USB_HW_POWER_SUSPEND); 506 507 if (do_unlock) 508 usbd_enum_unlock(udev); 509 510 USB_BUS_LOCK(bus); 511 } 512 513 /*------------------------------------------------------------------------* 514 * usb_bus_resume 515 * 516 * This function is used to resume the USB controller. 517 *------------------------------------------------------------------------*/ 518 static void 519 usb_bus_resume(struct usb_proc_msg *pm) 520 { 521 struct usb_bus *bus; 522 struct usb_device *udev; 523 usb_error_t err; 524 uint8_t do_unlock; 525 526 DPRINTF("\n"); 527 528 bus = ((struct usb_bus_msg *)pm)->bus; 529 udev = bus->devices[USB_ROOT_HUB_ADDR]; 530 531 if (udev == NULL || bus->bdev == NULL) 532 return; 533 534 USB_BUS_UNLOCK(bus); 535 536 do_unlock = usbd_enum_lock(udev); 537 #if 0 538 DEVMETHOD(usb_take_controller, NULL); /* dummy */ 539 #endif 540 USB_TAKE_CONTROLLER(device_get_parent(bus->bdev)); 541 542 USB_BUS_LOCK(bus); 543 bus->hw_power_state = 544 USB_HW_POWER_CONTROL | 545 USB_HW_POWER_BULK | 546 USB_HW_POWER_INTERRUPT | 547 USB_HW_POWER_ISOC | 548 USB_HW_POWER_NON_ROOT_HUB; 549 bus->no_explore = 0; 550 USB_BUS_UNLOCK(bus); 551 552 if (bus->methods->set_hw_power_sleep != NULL) 553 (bus->methods->set_hw_power_sleep) (bus, USB_HW_POWER_RESUME); 554 555 if (bus->methods->set_hw_power != NULL) 556 (bus->methods->set_hw_power) (bus); 557 558 /* restore USB configuration to index 0 */ 559 err = usbd_set_config_index(udev, 0); 560 if (err) 561 device_printf(bus->bdev, "Could not configure root HUB\n"); 562 563 /* probe and attach */ 564 err = usb_probe_and_attach(udev, USB_IFACE_INDEX_ANY); 565 if (err) { 566 device_printf(bus->bdev, "Could not probe and " 567 "attach root HUB\n"); 568 } 569 570 if (do_unlock) 571 usbd_enum_unlock(udev); 572 573 USB_BUS_LOCK(bus); 574 } 575 576 /*------------------------------------------------------------------------* 577 * usb_bus_reset 578 * 579 * This function is used to reset the USB controller. 580 *------------------------------------------------------------------------*/ 581 static void 582 usb_bus_reset(struct usb_proc_msg *pm) 583 { 584 struct usb_bus *bus; 585 586 DPRINTF("\n"); 587 588 bus = ((struct usb_bus_msg *)pm)->bus; 589 590 if (bus->bdev == NULL || bus->no_explore != 0) 591 return; 592 593 /* a suspend and resume will reset the USB controller */ 594 usb_bus_suspend(pm); 595 usb_bus_resume(pm); 596 } 597 598 /*------------------------------------------------------------------------* 599 * usb_bus_shutdown 600 * 601 * This function is used to shutdown the USB controller. 602 *------------------------------------------------------------------------*/ 603 static void 604 usb_bus_shutdown(struct usb_proc_msg *pm) 605 { 606 struct usb_bus *bus; 607 struct usb_device *udev; 608 usb_error_t err; 609 uint8_t do_unlock; 610 611 bus = ((struct usb_bus_msg *)pm)->bus; 612 udev = bus->devices[USB_ROOT_HUB_ADDR]; 613 614 if (udev == NULL || bus->bdev == NULL) 615 return; 616 617 USB_BUS_UNLOCK(bus); 618 619 bus_generic_shutdown(bus->bdev); 620 621 do_unlock = usbd_enum_lock(udev); 622 623 err = usbd_set_config_index(udev, USB_UNCONFIG_INDEX); 624 if (err) 625 device_printf(bus->bdev, "Could not unconfigure root HUB\n"); 626 627 USB_BUS_LOCK(bus); 628 bus->hw_power_state = 0; 629 bus->no_explore = 1; 630 USB_BUS_UNLOCK(bus); 631 632 if (bus->methods->set_hw_power != NULL) 633 (bus->methods->set_hw_power) (bus); 634 635 if (bus->methods->set_hw_power_sleep != NULL) 636 (bus->methods->set_hw_power_sleep) (bus, USB_HW_POWER_SHUTDOWN); 637 638 if (do_unlock) 639 usbd_enum_unlock(udev); 640 641 USB_BUS_LOCK(bus); 642 } 643 644 /*------------------------------------------------------------------------* 645 * usb_bus_cleanup 646 * 647 * This function is used to cleanup leftover USB character devices. 648 *------------------------------------------------------------------------*/ 649 #if USB_HAVE_UGEN 650 static void 651 usb_bus_cleanup(struct usb_proc_msg *pm) 652 { 653 struct usb_bus *bus; 654 struct usb_fs_privdata *pd; 655 656 bus = ((struct usb_bus_msg *)pm)->bus; 657 658 while ((pd = LIST_FIRST(&bus->pd_cleanup_list)) != NULL) { 659 LIST_REMOVE(pd, pd_next); 660 USB_BUS_UNLOCK(bus); 661 662 usb_destroy_dev_sync(pd); 663 664 USB_BUS_LOCK(bus); 665 } 666 } 667 #endif 668 669 static void 670 usb_power_wdog(void *arg) 671 { 672 struct usb_bus *bus = arg; 673 674 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 675 676 usb_callout_reset(&bus->power_wdog, 677 4 * hz, usb_power_wdog, arg); 678 679 #ifdef DDB 680 /* 681 * The following line of code is only here to recover from 682 * DDB: 683 */ 684 usb_proc_rewakeup(USB_BUS_EXPLORE_PROC(bus)); /* recover from DDB */ 685 #endif 686 687 #if USB_HAVE_POWERD 688 USB_BUS_UNLOCK(bus); 689 690 usb_bus_power_update(bus); 691 692 USB_BUS_LOCK(bus); 693 #endif 694 } 695 696 /*------------------------------------------------------------------------* 697 * usb_bus_attach 698 * 699 * This function attaches USB in context of the explore thread. 700 *------------------------------------------------------------------------*/ 701 static void 702 usb_bus_attach(struct usb_proc_msg *pm) 703 { 704 struct usb_bus *bus; 705 struct usb_device *child; 706 device_t dev; 707 usb_error_t err; 708 enum usb_dev_speed speed; 709 710 bus = ((struct usb_bus_msg *)pm)->bus; 711 dev = bus->bdev; 712 713 DPRINTF("\n"); 714 715 switch (bus->usbrev) { 716 case USB_REV_1_0: 717 speed = USB_SPEED_FULL; 718 device_printf(bus->bdev, "12Mbps Full Speed USB v1.0\n"); 719 break; 720 721 case USB_REV_1_1: 722 speed = USB_SPEED_FULL; 723 device_printf(bus->bdev, "12Mbps Full Speed USB v1.1\n"); 724 break; 725 726 case USB_REV_2_0: 727 speed = USB_SPEED_HIGH; 728 device_printf(bus->bdev, "480Mbps High Speed USB v2.0\n"); 729 break; 730 731 case USB_REV_2_5: 732 speed = USB_SPEED_VARIABLE; 733 device_printf(bus->bdev, "480Mbps Wireless USB v2.5\n"); 734 break; 735 736 case USB_REV_3_0: 737 speed = USB_SPEED_SUPER; 738 device_printf(bus->bdev, "5.0Gbps Super Speed USB v3.0\n"); 739 break; 740 741 default: 742 device_printf(bus->bdev, "Unsupported USB revision\n"); 743 #if USB_HAVE_ROOT_MOUNT_HOLD 744 usb_root_mount_rel(bus); 745 #endif 746 return; 747 } 748 749 /* default power_mask value */ 750 bus->hw_power_state = 751 USB_HW_POWER_CONTROL | 752 USB_HW_POWER_BULK | 753 USB_HW_POWER_INTERRUPT | 754 USB_HW_POWER_ISOC | 755 USB_HW_POWER_NON_ROOT_HUB; 756 757 USB_BUS_UNLOCK(bus); 758 759 /* make sure power is set at least once */ 760 761 if (bus->methods->set_hw_power != NULL) { 762 (bus->methods->set_hw_power) (bus); 763 } 764 765 /* allocate the Root USB device */ 766 767 child = usb_alloc_device(bus->bdev, bus, NULL, 0, 0, 1, 768 speed, USB_MODE_HOST); 769 if (child) { 770 err = usb_probe_and_attach(child, 771 USB_IFACE_INDEX_ANY); 772 if (!err) { 773 if ((bus->devices[USB_ROOT_HUB_ADDR] == NULL) || 774 (bus->devices[USB_ROOT_HUB_ADDR]->hub == NULL)) { 775 err = USB_ERR_NO_ROOT_HUB; 776 } 777 } 778 } else { 779 err = USB_ERR_NOMEM; 780 } 781 782 USB_BUS_LOCK(bus); 783 784 if (err) { 785 device_printf(bus->bdev, "Root HUB problem, error=%s\n", 786 usbd_errstr(err)); 787 #if USB_HAVE_ROOT_MOUNT_HOLD 788 usb_root_mount_rel(bus); 789 #endif 790 } 791 792 /* set softc - we are ready */ 793 device_set_softc(dev, bus); 794 795 /* start watchdog */ 796 usb_power_wdog(bus); 797 } 798 799 /*------------------------------------------------------------------------* 800 * usb_attach_sub 801 * 802 * This function creates a thread which runs the USB attach code. 803 *------------------------------------------------------------------------*/ 804 static void 805 usb_attach_sub(device_t dev, struct usb_bus *bus) 806 { 807 bus_topo_lock(); 808 if (usb_devclass_ptr == NULL) 809 usb_devclass_ptr = devclass_find("usbus"); 810 bus_topo_unlock(); 811 812 #if USB_HAVE_PF 813 usbpf_attach(bus); 814 #endif 815 /* Initialise USB process messages */ 816 bus->explore_msg[0].hdr.pm_callback = &usb_bus_explore; 817 bus->explore_msg[0].bus = bus; 818 bus->explore_msg[1].hdr.pm_callback = &usb_bus_explore; 819 bus->explore_msg[1].bus = bus; 820 821 bus->detach_msg[0].hdr.pm_callback = &usb_bus_detach; 822 bus->detach_msg[0].bus = bus; 823 bus->detach_msg[1].hdr.pm_callback = &usb_bus_detach; 824 bus->detach_msg[1].bus = bus; 825 826 bus->attach_msg[0].hdr.pm_callback = &usb_bus_attach; 827 bus->attach_msg[0].bus = bus; 828 bus->attach_msg[1].hdr.pm_callback = &usb_bus_attach; 829 bus->attach_msg[1].bus = bus; 830 831 bus->suspend_msg[0].hdr.pm_callback = &usb_bus_suspend; 832 bus->suspend_msg[0].bus = bus; 833 bus->suspend_msg[1].hdr.pm_callback = &usb_bus_suspend; 834 bus->suspend_msg[1].bus = bus; 835 836 bus->resume_msg[0].hdr.pm_callback = &usb_bus_resume; 837 bus->resume_msg[0].bus = bus; 838 bus->resume_msg[1].hdr.pm_callback = &usb_bus_resume; 839 bus->resume_msg[1].bus = bus; 840 841 bus->reset_msg[0].hdr.pm_callback = &usb_bus_reset; 842 bus->reset_msg[0].bus = bus; 843 bus->reset_msg[1].hdr.pm_callback = &usb_bus_reset; 844 bus->reset_msg[1].bus = bus; 845 846 bus->shutdown_msg[0].hdr.pm_callback = &usb_bus_shutdown; 847 bus->shutdown_msg[0].bus = bus; 848 bus->shutdown_msg[1].hdr.pm_callback = &usb_bus_shutdown; 849 bus->shutdown_msg[1].bus = bus; 850 851 #if USB_HAVE_UGEN 852 LIST_INIT(&bus->pd_cleanup_list); 853 bus->cleanup_msg[0].hdr.pm_callback = &usb_bus_cleanup; 854 bus->cleanup_msg[0].bus = bus; 855 bus->cleanup_msg[1].hdr.pm_callback = &usb_bus_cleanup; 856 bus->cleanup_msg[1].bus = bus; 857 #endif 858 859 #if USB_HAVE_PER_BUS_PROCESS 860 /* Create USB explore and callback processes */ 861 862 if (usb_proc_create(USB_BUS_GIANT_PROC(bus), 863 &bus->bus_mtx, device_get_nameunit(dev), USB_PRI_MED)) { 864 device_printf(dev, "WARNING: Creation of USB Giant " 865 "callback process failed.\n"); 866 } else if (usb_proc_create(USB_BUS_NON_GIANT_ISOC_PROC(bus), 867 &bus->bus_mtx, device_get_nameunit(dev), USB_PRI_HIGHEST)) { 868 device_printf(dev, "WARNING: Creation of USB non-Giant ISOC " 869 "callback process failed.\n"); 870 } else if (usb_proc_create(USB_BUS_NON_GIANT_BULK_PROC(bus), 871 &bus->bus_mtx, device_get_nameunit(dev), USB_PRI_HIGH)) { 872 device_printf(dev, "WARNING: Creation of USB non-Giant BULK " 873 "callback process failed.\n"); 874 } else if (usb_proc_create(USB_BUS_EXPLORE_PROC(bus), 875 &bus->bus_mtx, device_get_nameunit(dev), USB_PRI_MED)) { 876 device_printf(dev, "WARNING: Creation of USB explore " 877 "process failed.\n"); 878 } else if (usb_proc_create(USB_BUS_CONTROL_XFER_PROC(bus), 879 &bus->bus_mtx, device_get_nameunit(dev), USB_PRI_MED)) { 880 device_printf(dev, "WARNING: Creation of USB control transfer " 881 "process failed.\n"); 882 } else 883 #endif 884 { 885 /* Get final attach going */ 886 USB_BUS_LOCK(bus); 887 usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 888 &bus->attach_msg[0], &bus->attach_msg[1]); 889 USB_BUS_UNLOCK(bus); 890 891 /* Do initial explore */ 892 usb_needs_explore(bus, 1); 893 } 894 } 895 SYSUNINIT(usb_bus_unload, SI_SUB_KLD, SI_ORDER_ANY, usb_bus_unload, NULL); 896 897 /*------------------------------------------------------------------------* 898 * usb_bus_mem_flush_all_cb 899 *------------------------------------------------------------------------*/ 900 #if USB_HAVE_BUSDMA 901 static void 902 usb_bus_mem_flush_all_cb(struct usb_bus *bus, struct usb_page_cache *pc, 903 struct usb_page *pg, usb_size_t size, usb_size_t align) 904 { 905 usb_pc_cpu_flush(pc); 906 } 907 #endif 908 909 /*------------------------------------------------------------------------* 910 * usb_bus_mem_flush_all - factored out code 911 *------------------------------------------------------------------------*/ 912 #if USB_HAVE_BUSDMA 913 void 914 usb_bus_mem_flush_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb) 915 { 916 if (cb) { 917 cb(bus, &usb_bus_mem_flush_all_cb); 918 } 919 } 920 #endif 921 922 /*------------------------------------------------------------------------* 923 * usb_bus_mem_alloc_all_cb 924 *------------------------------------------------------------------------*/ 925 #if USB_HAVE_BUSDMA 926 static void 927 usb_bus_mem_alloc_all_cb(struct usb_bus *bus, struct usb_page_cache *pc, 928 struct usb_page *pg, usb_size_t size, usb_size_t align) 929 { 930 /* need to initialize the page cache */ 931 pc->tag_parent = bus->dma_parent_tag; 932 933 if (usb_pc_alloc_mem(pc, pg, size, align)) { 934 bus->alloc_failed = 1; 935 } 936 } 937 #endif 938 939 /*------------------------------------------------------------------------* 940 * usb_bus_mem_alloc_all - factored out code 941 * 942 * Returns: 943 * 0: Success 944 * Else: Failure 945 *------------------------------------------------------------------------*/ 946 uint8_t 947 usb_bus_mem_alloc_all(struct usb_bus *bus, bus_dma_tag_t dmat, 948 usb_bus_mem_cb_t *cb) 949 { 950 bus->alloc_failed = 0; 951 952 mtx_init(&bus->bus_mtx, device_get_nameunit(bus->parent), 953 "usb_def_mtx", MTX_DEF | MTX_RECURSE); 954 955 mtx_init(&bus->bus_spin_lock, device_get_nameunit(bus->parent), 956 "usb_spin_mtx", MTX_SPIN | MTX_RECURSE); 957 958 usb_callout_init_mtx(&bus->power_wdog, 959 &bus->bus_mtx, 0); 960 961 TAILQ_INIT(&bus->intr_q.head); 962 963 #if USB_HAVE_BUSDMA 964 usb_dma_tag_setup(bus->dma_parent_tag, bus->dma_tags, 965 dmat, &bus->bus_mtx, NULL, bus->dma_bits, USB_BUS_DMA_TAG_MAX); 966 #endif 967 if ((bus->devices_max > USB_MAX_DEVICES) || 968 (bus->devices_max < USB_MIN_DEVICES) || 969 (bus->devices == NULL)) { 970 DPRINTFN(0, "Devices field has not been " 971 "initialised properly\n"); 972 bus->alloc_failed = 1; /* failure */ 973 } 974 #if USB_HAVE_BUSDMA 975 if (cb) { 976 cb(bus, &usb_bus_mem_alloc_all_cb); 977 } 978 #endif 979 if (bus->alloc_failed) { 980 usb_bus_mem_free_all(bus, cb); 981 } 982 return (bus->alloc_failed); 983 } 984 985 /*------------------------------------------------------------------------* 986 * usb_bus_mem_free_all_cb 987 *------------------------------------------------------------------------*/ 988 #if USB_HAVE_BUSDMA 989 static void 990 usb_bus_mem_free_all_cb(struct usb_bus *bus, struct usb_page_cache *pc, 991 struct usb_page *pg, usb_size_t size, usb_size_t align) 992 { 993 usb_pc_free_mem(pc); 994 } 995 #endif 996 997 /*------------------------------------------------------------------------* 998 * usb_bus_mem_free_all - factored out code 999 *------------------------------------------------------------------------*/ 1000 void 1001 usb_bus_mem_free_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb) 1002 { 1003 #if USB_HAVE_BUSDMA 1004 if (cb) { 1005 cb(bus, &usb_bus_mem_free_all_cb); 1006 } 1007 usb_dma_tag_unsetup(bus->dma_parent_tag); 1008 #endif 1009 1010 mtx_destroy(&bus->bus_mtx); 1011 mtx_destroy(&bus->bus_spin_lock); 1012 } 1013 1014 /* convenience wrappers */ 1015 void 1016 usb_proc_explore_mwait(struct usb_device *udev, void *pm1, void *pm2) 1017 { 1018 usb_proc_mwait(USB_BUS_EXPLORE_PROC(udev->bus), pm1, pm2); 1019 } 1020 1021 void * 1022 usb_proc_explore_msignal(struct usb_device *udev, void *pm1, void *pm2) 1023 { 1024 return (usb_proc_msignal(USB_BUS_EXPLORE_PROC(udev->bus), pm1, pm2)); 1025 } 1026 1027 void 1028 usb_proc_explore_lock(struct usb_device *udev) 1029 { 1030 USB_BUS_LOCK(udev->bus); 1031 } 1032 1033 void 1034 usb_proc_explore_unlock(struct usb_device *udev) 1035 { 1036 USB_BUS_UNLOCK(udev->bus); 1037 } 1038