1 /*- 2 * Copyright (c) 2014-2017 Vladimir Kondratyev <wulf@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 /* 31 * MS Windows 7/8/10 compatible USB HID Multi-touch Device driver. 32 * https://msdn.microsoft.com/en-us/library/windows/hardware/jj151569(v=vs.85).aspx 33 * https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt 34 */ 35 36 #include <sys/param.h> 37 #include <sys/bus.h> 38 #include <sys/conf.h> 39 #include <sys/kernel.h> 40 #include <sys/lock.h> 41 #include <sys/malloc.h> 42 #include <sys/module.h> 43 #include <sys/mutex.h> 44 #include <sys/stddef.h> 45 #include <sys/sysctl.h> 46 #include <sys/systm.h> 47 48 #include <dev/hid/hid.h> 49 50 #include "usbdevs.h" 51 #include <dev/usb/usb.h> 52 #include <dev/usb/usbdi.h> 53 #include <dev/usb/usbdi_util.h> 54 #include <dev/usb/usbhid.h> 55 56 #include <dev/usb/quirk/usb_quirk.h> 57 58 #include <dev/evdev/evdev.h> 59 #include <dev/evdev/input.h> 60 61 #define USB_DEBUG_VAR wmt_debug 62 #include <dev/usb/usb_debug.h> 63 64 static SYSCTL_NODE(_hw_usb, OID_AUTO, wmt, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 65 "USB MSWindows 7/8/10 compatible Multi-touch Device"); 66 #ifdef USB_DEBUG 67 static int wmt_debug = 0; 68 SYSCTL_INT(_hw_usb_wmt, OID_AUTO, debug, CTLFLAG_RWTUN, 69 &wmt_debug, 1, "Debug level"); 70 #endif 71 static bool wmt_timestamps = 0; 72 SYSCTL_BOOL(_hw_usb_wmt, OID_AUTO, timestamps, CTLFLAG_RDTUN, 73 &wmt_timestamps, 1, "Enable hardware timestamp reporting"); 74 75 #define WMT_BSIZE 1024 /* bytes, buffer size */ 76 #define WMT_BTN_MAX 8 /* Number of buttons supported */ 77 78 enum { 79 WMT_INTR_DT, 80 WMT_N_TRANSFER, 81 }; 82 83 enum wmt_type { 84 WMT_TYPE_UNKNOWN = 0, /* HID report descriptor is not probed */ 85 WMT_TYPE_UNSUPPORTED, /* Repdescr does not belong to MT device */ 86 WMT_TYPE_TOUCHPAD, 87 WMT_TYPE_TOUCHSCREEN, 88 }; 89 90 enum wmt_input_mode { 91 WMT_INPUT_MODE_MOUSE = 0x0, 92 WMT_INPUT_MODE_MT_TOUCHSCREEN = 0x2, 93 WMT_INPUT_MODE_MT_TOUCHPAD = 0x3, 94 }; 95 96 enum { 97 WMT_TIP_SWITCH = ABS_MT_INDEX(ABS_MT_TOOL_TYPE), 98 WMT_WIDTH = ABS_MT_INDEX(ABS_MT_TOUCH_MAJOR), 99 WMT_HEIGHT = ABS_MT_INDEX(ABS_MT_TOUCH_MINOR), 100 WMT_ORIENTATION = ABS_MT_INDEX(ABS_MT_ORIENTATION), 101 WMT_X = ABS_MT_INDEX(ABS_MT_POSITION_X), 102 WMT_Y = ABS_MT_INDEX(ABS_MT_POSITION_Y), 103 WMT_CONTACTID = ABS_MT_INDEX(ABS_MT_TRACKING_ID), 104 WMT_PRESSURE = ABS_MT_INDEX(ABS_MT_PRESSURE), 105 WMT_IN_RANGE = ABS_MT_INDEX(ABS_MT_DISTANCE), 106 WMT_CONFIDENCE = ABS_MT_INDEX(ABS_MT_BLOB_ID), 107 WMT_TOOL_X = ABS_MT_INDEX(ABS_MT_TOOL_X), 108 WMT_TOOL_Y = ABS_MT_INDEX(ABS_MT_TOOL_Y), 109 }; 110 111 #define WMT_N_USAGES MT_CNT 112 #define WMT_NO_USAGE -1 113 114 struct wmt_hid_map_item { 115 char name[5]; 116 int32_t usage; /* HID usage */ 117 bool reported; /* Item value is passed to evdev */ 118 bool required; /* Required for MT Digitizers */ 119 }; 120 121 static const struct wmt_hid_map_item wmt_hid_map[WMT_N_USAGES] = { 122 [WMT_TIP_SWITCH] = { 123 .name = "TIP", 124 .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_TIP_SWITCH), 125 .reported = false, 126 .required = true, 127 }, 128 [WMT_WIDTH] = { 129 .name = "WDTH", 130 .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_WIDTH), 131 .reported = true, 132 .required = false, 133 }, 134 [WMT_HEIGHT] = { 135 .name = "HGHT", 136 .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_HEIGHT), 137 .reported = true, 138 .required = false, 139 }, 140 [WMT_ORIENTATION] = { 141 .name = "ORIE", 142 .usage = WMT_NO_USAGE, 143 .reported = true, 144 .required = false, 145 }, 146 [WMT_X] = { 147 .name = "X", 148 .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_X), 149 .reported = true, 150 .required = true, 151 }, 152 [WMT_Y] = { 153 .name = "Y", 154 .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Y), 155 .reported = true, 156 .required = true, 157 }, 158 [WMT_CONTACTID] = { 159 .name = "C_ID", 160 .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_CONTACTID), 161 .reported = true, 162 .required = true, 163 }, 164 [WMT_PRESSURE] = { 165 .name = "PRES", 166 .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_TIP_PRESSURE), 167 .reported = true, 168 .required = false, 169 }, 170 [WMT_IN_RANGE] = { 171 .name = "RANG", 172 .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_IN_RANGE), 173 .reported = true, 174 .required = false, 175 }, 176 [WMT_CONFIDENCE] = { 177 .name = "CONF", 178 .usage = HID_USAGE2(HUP_DIGITIZERS, HUD_CONFIDENCE), 179 .reported = false, 180 .required = false, 181 }, 182 [WMT_TOOL_X] = { /* Shares HID usage with WMT_X */ 183 .name = "TL_X", 184 .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_X), 185 .reported = true, 186 .required = false, 187 }, 188 [WMT_TOOL_Y] = { /* Shares HID usage with WMT_Y */ 189 .name = "TL_Y", 190 .usage = HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Y), 191 .reported = true, 192 .required = false, 193 }, 194 }; 195 196 struct wmt_absinfo { 197 int32_t min; 198 int32_t max; 199 int32_t res; 200 }; 201 202 struct wmt_softc { 203 device_t dev; 204 enum wmt_type type; 205 206 int32_t cont_count_max; 207 struct mtx mtx; 208 struct wmt_absinfo ai[WMT_N_USAGES]; 209 struct hid_location locs[MAX_MT_SLOTS][WMT_N_USAGES]; 210 struct hid_location cont_count_loc; 211 struct hid_location btn_loc[WMT_BTN_MAX]; 212 struct hid_location int_btn_loc; 213 struct hid_location scan_time_loc; 214 int32_t scan_time_max; 215 int32_t scan_time; 216 int32_t timestamp; 217 bool touch; 218 bool prev_touch; 219 220 struct usb_xfer *xfer[WMT_N_TRANSFER]; 221 struct evdev_dev *evdev; 222 223 union evdev_mt_slot slot_data; 224 uint8_t caps[howmany(WMT_N_USAGES, 8)]; 225 uint8_t buttons[howmany(WMT_BTN_MAX, 8)]; 226 uint32_t isize; 227 uint32_t nconts_per_report; 228 uint32_t nconts_todo; 229 uint32_t report_len; 230 uint8_t report_id; 231 uint32_t max_button; 232 bool has_int_button; 233 bool is_clickpad; 234 bool do_timestamps; 235 236 struct hid_location cont_max_loc; 237 uint32_t cont_max_rlen; 238 uint8_t cont_max_rid; 239 struct hid_location btn_type_loc; 240 uint32_t btn_type_rlen; 241 uint8_t btn_type_rid; 242 uint32_t thqa_cert_rlen; 243 uint8_t thqa_cert_rid; 244 struct hid_location input_mode_loc; 245 uint32_t input_mode_rlen; 246 uint8_t input_mode_rid; 247 248 uint8_t buf[WMT_BSIZE] __aligned(4); 249 }; 250 251 #define WMT_FOREACH_USAGE(caps, usage) \ 252 for ((usage) = 0; (usage) < WMT_N_USAGES; ++(usage)) \ 253 if (isset((caps), (usage))) 254 255 static enum wmt_type wmt_hid_parse(struct wmt_softc *, const void *, uint16_t); 256 static int wmt_set_input_mode(struct wmt_softc *, enum wmt_input_mode); 257 258 static usb_callback_t wmt_intr_callback; 259 260 static device_probe_t wmt_probe; 261 static device_attach_t wmt_attach; 262 static device_detach_t wmt_detach; 263 264 #if __FreeBSD_version >= 1200077 265 static evdev_open_t wmt_ev_open; 266 static evdev_close_t wmt_ev_close; 267 #else 268 static evdev_open_t wmt_ev_open_11; 269 static evdev_close_t wmt_ev_close_11; 270 #endif 271 272 static const struct evdev_methods wmt_evdev_methods = { 273 #if __FreeBSD_version >= 1200077 274 .ev_open = &wmt_ev_open, 275 .ev_close = &wmt_ev_close, 276 #else 277 .ev_open = &wmt_ev_open_11, 278 .ev_close = &wmt_ev_close_11, 279 #endif 280 }; 281 282 static const struct usb_config wmt_config[WMT_N_TRANSFER] = { 283 [WMT_INTR_DT] = { 284 .type = UE_INTERRUPT, 285 .endpoint = UE_ADDR_ANY, 286 .direction = UE_DIR_IN, 287 .flags = { .pipe_bof = 1, .short_xfer_ok = 1 }, 288 .bufsize = WMT_BSIZE, 289 .callback = &wmt_intr_callback, 290 }, 291 }; 292 293 static int 294 wmt_probe(device_t dev) 295 { 296 struct usb_attach_arg *uaa = device_get_ivars(dev); 297 struct wmt_softc *sc = device_get_softc(dev); 298 void *d_ptr; 299 uint16_t d_len; 300 int err; 301 302 if (uaa->usb_mode != USB_MODE_HOST) 303 return (ENXIO); 304 305 if (uaa->info.bInterfaceClass != UICLASS_HID) 306 return (ENXIO); 307 308 if (usb_test_quirk(uaa, UQ_WMT_IGNORE)) 309 return (ENXIO); 310 311 err = usbd_req_get_hid_desc(uaa->device, NULL, 312 &d_ptr, &d_len, M_TEMP, uaa->info.bIfaceIndex); 313 if (err) 314 return (ENXIO); 315 316 /* Check if report descriptor belongs to a HID multitouch device */ 317 if (sc->type == WMT_TYPE_UNKNOWN) 318 sc->type = wmt_hid_parse(sc, d_ptr, d_len); 319 if (sc->type != WMT_TYPE_UNSUPPORTED) 320 err = BUS_PROBE_DEFAULT; 321 else 322 err = ENXIO; 323 324 /* Check HID report length */ 325 if (sc->type != WMT_TYPE_UNSUPPORTED && 326 (sc->isize <= 0 || sc->isize > WMT_BSIZE)) { 327 DPRINTF("Input size invalid or too large: %d\n", sc->isize); 328 err = ENXIO; 329 } 330 331 free(d_ptr, M_TEMP); 332 return (err); 333 } 334 335 static int 336 wmt_attach(device_t dev) 337 { 338 struct usb_attach_arg *uaa = device_get_ivars(dev); 339 struct wmt_softc *sc = device_get_softc(dev); 340 uint32_t cont_count_max; 341 int nbuttons, btn; 342 size_t i; 343 int err; 344 345 device_set_usb_desc(dev); 346 sc->dev = dev; 347 348 /* Fetch and parse "Contact count maximum" feature report */ 349 if (sc->cont_max_rlen > 0 && sc->cont_max_rlen <= WMT_BSIZE) { 350 err = usbd_req_get_report(uaa->device, NULL, sc->buf, 351 sc->cont_max_rlen, uaa->info.bIfaceIndex, 352 UHID_FEATURE_REPORT, sc->cont_max_rid); 353 if (err == USB_ERR_NORMAL_COMPLETION) { 354 cont_count_max = hid_get_udata(sc->buf + 1, 355 sc->cont_max_rlen - 1, &sc->cont_max_loc); 356 /* 357 * Feature report is a primary source of 358 * 'Contact Count Maximum' 359 */ 360 if (cont_count_max > 0) 361 sc->cont_count_max = cont_count_max; 362 } else 363 DPRINTF("usbd_req_get_report error=(%s)\n", 364 usbd_errstr(err)); 365 } else 366 DPRINTF("Feature report %hhu size invalid or too large: %u\n", 367 sc->cont_max_rid, sc->cont_max_rlen); 368 369 /* Fetch and parse "Button type" feature report */ 370 if (sc->btn_type_rlen > 1 && sc->btn_type_rlen <= WMT_BSIZE && 371 sc->btn_type_rid != sc->cont_max_rid) { 372 bzero(sc->buf, sc->btn_type_rlen); 373 err = usbd_req_get_report(uaa->device, NULL, sc->buf, 374 sc->btn_type_rlen, uaa->info.bIfaceIndex, 375 UHID_FEATURE_REPORT, sc->btn_type_rid); 376 } 377 if (sc->btn_type_rlen > 1) { 378 if (err == 0) 379 sc->is_clickpad = hid_get_udata(sc->buf + 1, 380 sc->btn_type_rlen - 1, &sc->btn_type_loc) == 0; 381 else 382 DPRINTF("usbd_req_get_report error=%d\n", err); 383 } 384 385 /* Fetch THQA certificate to enable some devices like WaveShare */ 386 if (sc->thqa_cert_rlen > 0 && sc->thqa_cert_rlen <= WMT_BSIZE && 387 sc->thqa_cert_rid != sc->cont_max_rid) 388 (void)usbd_req_get_report(uaa->device, NULL, sc->buf, 389 sc->thqa_cert_rlen, uaa->info.bIfaceIndex, 390 UHID_FEATURE_REPORT, sc->thqa_cert_rid); 391 392 /* Switch touchpad in to absolute multitouch mode */ 393 if (sc->type == WMT_TYPE_TOUCHPAD) { 394 err = wmt_set_input_mode(sc, WMT_INPUT_MODE_MT_TOUCHPAD); 395 if (err != 0) 396 DPRINTF("Failed to set input mode: %d\n", err); 397 } 398 399 /* Cap contact count maximum to MAX_MT_SLOTS */ 400 if (sc->cont_count_max > MAX_MT_SLOTS) { 401 DPRINTF("Hardware reported %d contacts while only %d is " 402 "supported\n", (int)sc->cont_count_max, MAX_MT_SLOTS); 403 sc->cont_count_max = MAX_MT_SLOTS; 404 } 405 406 if (/*usb_test_quirk(hw, UQ_MT_TIMESTAMP) ||*/ wmt_timestamps) 407 sc->do_timestamps = true; 408 409 mtx_init(&sc->mtx, "wmt lock", NULL, MTX_DEF); 410 411 err = usbd_transfer_setup(uaa->device, &uaa->info.bIfaceIndex, 412 sc->xfer, wmt_config, WMT_N_TRANSFER, sc, &sc->mtx); 413 if (err != USB_ERR_NORMAL_COMPLETION) { 414 DPRINTF("usbd_transfer_setup error=%s\n", usbd_errstr(err)); 415 goto detach; 416 } 417 418 sc->evdev = evdev_alloc(); 419 evdev_set_name(sc->evdev, device_get_desc(dev)); 420 evdev_set_phys(sc->evdev, device_get_nameunit(dev)); 421 evdev_set_id(sc->evdev, BUS_USB, uaa->info.idVendor, 422 uaa->info.idProduct, 0); 423 evdev_set_serial(sc->evdev, usb_get_serial(uaa->device)); 424 evdev_set_methods(sc->evdev, sc, &wmt_evdev_methods); 425 evdev_set_flag(sc->evdev, EVDEV_FLAG_MT_STCOMPAT); 426 switch (sc->type) { 427 case WMT_TYPE_TOUCHSCREEN: 428 evdev_support_prop(sc->evdev, INPUT_PROP_DIRECT); 429 break; 430 case WMT_TYPE_TOUCHPAD: 431 evdev_support_prop(sc->evdev, INPUT_PROP_POINTER); 432 if (sc->is_clickpad) 433 evdev_support_prop(sc->evdev, INPUT_PROP_BUTTONPAD); 434 break; 435 default: 436 KASSERT(0, ("wmt_attach: unsupported touch device type")); 437 } 438 evdev_support_event(sc->evdev, EV_SYN); 439 evdev_support_event(sc->evdev, EV_ABS); 440 if (sc->do_timestamps) { 441 evdev_support_event(sc->evdev, EV_MSC); 442 evdev_support_msc(sc->evdev, MSC_TIMESTAMP); 443 } 444 nbuttons = 0; 445 if (sc->max_button != 0 || sc->has_int_button) { 446 evdev_support_event(sc->evdev, EV_KEY); 447 if (sc->has_int_button) 448 evdev_support_key(sc->evdev, BTN_LEFT); 449 for (btn = 0; btn < sc->max_button; ++btn) { 450 if (isset(sc->buttons, btn)) { 451 evdev_support_key(sc->evdev, BTN_MOUSE + btn); 452 nbuttons++; 453 } 454 } 455 } 456 evdev_support_abs(sc->evdev, 457 ABS_MT_SLOT, 0, sc->cont_count_max - 1, 0, 0, 0); 458 WMT_FOREACH_USAGE(sc->caps, i) { 459 if (wmt_hid_map[i].reported) 460 evdev_support_abs(sc->evdev, ABS_MT_FIRST + i, 461 sc->ai[i].min, sc->ai[i].max, 0, 0, sc->ai[i].res); 462 } 463 464 err = evdev_register_mtx(sc->evdev, &sc->mtx); 465 if (err) 466 goto detach; 467 468 /* Announce information about the touch device */ 469 device_printf(sc->dev, "Multitouch %s with %d external button%s%s\n", 470 sc->type == WMT_TYPE_TOUCHSCREEN ? "touchscreen" : "touchpad", 471 nbuttons, nbuttons != 1 ? "s" : "", 472 sc->is_clickpad ? ", click-pad" : ""); 473 device_printf(sc->dev, 474 "%d contacts and [%s%s%s%s%s]. Report range [%d:%d] - [%d:%d]\n", 475 (int)sc->cont_count_max, 476 isset(sc->caps, WMT_IN_RANGE) ? "R" : "", 477 isset(sc->caps, WMT_CONFIDENCE) ? "C" : "", 478 isset(sc->caps, WMT_WIDTH) ? "W" : "", 479 isset(sc->caps, WMT_HEIGHT) ? "H" : "", 480 isset(sc->caps, WMT_PRESSURE) ? "P" : "", 481 (int)sc->ai[WMT_X].min, (int)sc->ai[WMT_Y].min, 482 (int)sc->ai[WMT_X].max, (int)sc->ai[WMT_Y].max); 483 484 return (0); 485 486 detach: 487 wmt_detach(dev); 488 return (ENXIO); 489 } 490 491 static int 492 wmt_detach(device_t dev) 493 { 494 struct wmt_softc *sc = device_get_softc(dev); 495 496 evdev_free(sc->evdev); 497 usbd_transfer_unsetup(sc->xfer, WMT_N_TRANSFER); 498 mtx_destroy(&sc->mtx); 499 return (0); 500 } 501 502 static void 503 wmt_process_report(struct wmt_softc *sc, uint8_t *buf, int len) 504 { 505 size_t usage; 506 union evdev_mt_slot *slot_data; 507 uint32_t cont, btn; 508 uint32_t cont_count; 509 uint32_t width; 510 uint32_t height; 511 uint32_t int_btn = 0; 512 uint32_t left_btn = 0; 513 int slot; 514 uint32_t scan_time; 515 int32_t delta; 516 517 /* 518 * "In Parallel mode, devices report all contact information in a 519 * single packet. Each physical contact is represented by a logical 520 * collection that is embedded in the top-level collection." 521 * 522 * Since additional contacts that were not present will still be in the 523 * report with contactid=0 but contactids are zero-based, find 524 * contactcount first. 525 */ 526 cont_count = hid_get_udata(buf, len, &sc->cont_count_loc); 527 /* 528 * "In Hybrid mode, the number of contacts that can be reported in one 529 * report is less than the maximum number of contacts that the device 530 * supports. For example, a device that supports a maximum of 531 * 4 concurrent physical contacts, can set up its top-level collection 532 * to deliver a maximum of two contacts in one report. If four contact 533 * points are present, the device can break these up into two serial 534 * reports that deliver two contacts each. 535 * 536 * "When a device delivers data in this manner, the Contact Count usage 537 * value in the first report should reflect the total number of 538 * contacts that are being delivered in the hybrid reports. The other 539 * serial reports should have a contact count of zero (0)." 540 */ 541 if (cont_count != 0) 542 sc->nconts_todo = cont_count; 543 544 #ifdef USB_DEBUG 545 DPRINTFN(6, "cont_count:%2u", (unsigned)cont_count); 546 if (wmt_debug >= 6) { 547 WMT_FOREACH_USAGE(sc->caps, usage) { 548 if (wmt_hid_map[usage].usage != WMT_NO_USAGE) 549 printf(" %-4s", wmt_hid_map[usage].name); 550 } 551 printf("\n"); 552 } 553 #endif 554 555 /* Find the number of contacts reported in current report */ 556 cont_count = MIN(sc->nconts_todo, sc->nconts_per_report); 557 558 /* Use protocol Type B for reporting events */ 559 for (cont = 0; cont < cont_count; cont++) { 560 slot_data = &sc->slot_data; 561 bzero(slot_data, sizeof(sc->slot_data)); 562 WMT_FOREACH_USAGE(sc->caps, usage) { 563 if (sc->locs[cont][usage].size > 0) 564 slot_data->val[usage] = hid_get_udata( 565 buf, len, &sc->locs[cont][usage]); 566 } 567 568 slot = evdev_mt_id_to_slot(sc->evdev, slot_data->id); 569 570 #ifdef USB_DEBUG 571 DPRINTFN(6, "cont%01x: data = ", cont); 572 if (wmt_debug >= 6) { 573 WMT_FOREACH_USAGE(sc->caps, usage) { 574 if (wmt_hid_map[usage].usage != WMT_NO_USAGE) 575 printf("%04x ", slot_data->val[usage]); 576 } 577 printf("slot = %d\n", slot); 578 } 579 #endif 580 581 if (slot == -1) { 582 DPRINTF("Slot overflow for contact_id %u\n", 583 (unsigned)slot_data->id); 584 continue; 585 } 586 587 if (slot_data->val[WMT_TIP_SWITCH] != 0 && 588 !(isset(sc->caps, WMT_CONFIDENCE) && 589 slot_data->val[WMT_CONFIDENCE] == 0)) { 590 /* This finger is in proximity of the sensor */ 591 sc->touch = true; 592 slot_data->dist = !slot_data->val[WMT_IN_RANGE]; 593 /* Divided by two to match visual scale of touch */ 594 width = slot_data->val[WMT_WIDTH] >> 1; 595 height = slot_data->val[WMT_HEIGHT] >> 1; 596 slot_data->ori = width > height; 597 slot_data->maj = MAX(width, height); 598 slot_data->min = MIN(width, height); 599 } else 600 slot_data = NULL; 601 602 evdev_mt_push_slot(sc->evdev, slot, slot_data); 603 } 604 605 sc->nconts_todo -= cont_count; 606 if (sc->do_timestamps && sc->nconts_todo == 0) { 607 /* HUD_SCAN_TIME is measured in 100us, convert to us. */ 608 scan_time = hid_get_udata(buf, len, &sc->scan_time_loc); 609 if (sc->prev_touch) { 610 delta = scan_time - sc->scan_time; 611 if (delta < 0) 612 delta += sc->scan_time_max; 613 } else 614 delta = 0; 615 sc->scan_time = scan_time; 616 sc->timestamp += delta * 100; 617 evdev_push_msc(sc->evdev, MSC_TIMESTAMP, sc->timestamp); 618 sc->prev_touch = sc->touch; 619 sc->touch = false; 620 if (!sc->prev_touch) 621 sc->timestamp = 0; 622 } 623 if (sc->nconts_todo == 0) { 624 /* Report both the click and external left btns as BTN_LEFT */ 625 if (sc->has_int_button) 626 int_btn = hid_get_data(buf, len, &sc->int_btn_loc); 627 if (isset(sc->buttons, 0)) 628 left_btn = hid_get_data(buf, len, &sc->btn_loc[0]); 629 if (sc->has_int_button || isset(sc->buttons, 0)) 630 evdev_push_key(sc->evdev, BTN_LEFT, 631 (int_btn != 0) | (left_btn != 0)); 632 for (btn = 1; btn < sc->max_button; ++btn) { 633 if (isset(sc->buttons, btn)) 634 evdev_push_key(sc->evdev, BTN_MOUSE + btn, 635 hid_get_data(buf, 636 len, 637 &sc->btn_loc[btn]) != 0); 638 } 639 evdev_sync(sc->evdev); 640 } 641 } 642 643 static void 644 wmt_intr_callback(struct usb_xfer *xfer, usb_error_t error) 645 { 646 struct wmt_softc *sc = usbd_xfer_softc(xfer); 647 struct usb_page_cache *pc; 648 uint8_t *buf = sc->buf; 649 int len; 650 651 usbd_xfer_status(xfer, &len, NULL, NULL, NULL); 652 653 switch (USB_GET_STATE(xfer)) { 654 case USB_ST_TRANSFERRED: 655 pc = usbd_xfer_get_frame(xfer, 0); 656 657 DPRINTFN(6, "sc=%p actlen=%d\n", sc, len); 658 659 if (len >= (int)sc->report_len || 660 (len > 0 && sc->report_id != 0)) { 661 /* Limit report length to the maximum */ 662 if (len > (int)sc->report_len) 663 len = sc->report_len; 664 665 usbd_copy_out(pc, 0, buf, len); 666 667 /* Ignore irrelevant reports */ 668 if (sc->report_id && *buf != sc->report_id) 669 goto tr_ignore; 670 671 /* Make sure we don't process old data */ 672 if (len < sc->report_len) 673 bzero(buf + len, sc->report_len - len); 674 675 /* Strip leading "report ID" byte */ 676 if (sc->report_id) { 677 len--; 678 buf++; 679 } 680 681 wmt_process_report(sc, buf, len); 682 } else { 683 tr_ignore: 684 DPRINTF("Ignored transfer, %d bytes\n", len); 685 } 686 687 case USB_ST_SETUP: 688 tr_setup: 689 usbd_xfer_set_frame_len(xfer, 0, sc->isize); 690 usbd_transfer_submit(xfer); 691 break; 692 default: 693 if (error != USB_ERR_CANCELLED) { 694 /* Try clear stall first */ 695 usbd_xfer_set_stall(xfer); 696 goto tr_setup; 697 } 698 break; 699 } 700 } 701 702 static void 703 wmt_ev_close_11(struct evdev_dev *evdev, void *ev_softc) 704 { 705 struct wmt_softc *sc = ev_softc; 706 707 mtx_assert(&sc->mtx, MA_OWNED); 708 usbd_transfer_stop(sc->xfer[WMT_INTR_DT]); 709 } 710 711 static int 712 wmt_ev_open_11(struct evdev_dev *evdev, void *ev_softc) 713 { 714 struct wmt_softc *sc = ev_softc; 715 716 mtx_assert(&sc->mtx, MA_OWNED); 717 usbd_transfer_start(sc->xfer[WMT_INTR_DT]); 718 719 return (0); 720 } 721 722 #if __FreeBSD_version >= 1200077 723 static int 724 wmt_ev_close(struct evdev_dev *evdev) 725 { 726 struct wmt_softc *sc = evdev_get_softc(evdev); 727 728 wmt_ev_close_11(evdev, sc); 729 730 return (0); 731 } 732 733 static int 734 wmt_ev_open(struct evdev_dev *evdev) 735 { 736 struct wmt_softc *sc = evdev_get_softc(evdev); 737 738 return (wmt_ev_open_11(evdev, sc)); 739 740 } 741 #endif 742 743 static enum wmt_type 744 wmt_hid_parse(struct wmt_softc *sc, const void *d_ptr, uint16_t d_len) 745 { 746 struct hid_item hi; 747 struct hid_data *hd; 748 size_t i; 749 size_t cont = 0; 750 enum wmt_type type = WMT_TYPE_UNSUPPORTED; 751 uint32_t left_btn, btn; 752 int32_t cont_count_max = 0; 753 uint8_t report_id = 0; 754 bool touch_coll = false; 755 bool finger_coll = false; 756 bool cont_count_found = false; 757 bool scan_time_found = false; 758 bool has_int_button = false; 759 760 #define WMT_HI_ABSOLUTE(hi) \ 761 (((hi).flags & (HIO_CONST|HIO_VARIABLE|HIO_RELATIVE)) == HIO_VARIABLE) 762 #define HUMS_THQA_CERT 0xC5 763 764 /* Parse features for maximum contact count */ 765 hd = hid_start_parse(d_ptr, d_len, 1 << hid_feature); 766 while (hid_get_item(hd, &hi)) { 767 switch (hi.kind) { 768 case hid_collection: 769 if (hi.collevel == 1 && hi.usage == 770 HID_USAGE2(HUP_DIGITIZERS, HUD_TOUCHSCREEN)) { 771 touch_coll = true; 772 type = WMT_TYPE_TOUCHSCREEN; 773 left_btn = 1; 774 break; 775 } 776 if (hi.collevel == 1 && hi.usage == 777 HID_USAGE2(HUP_DIGITIZERS, HUD_TOUCHPAD)) { 778 touch_coll = true; 779 type = WMT_TYPE_TOUCHPAD; 780 left_btn = 2; 781 } 782 break; 783 case hid_endcollection: 784 if (hi.collevel == 0 && touch_coll) 785 touch_coll = false; 786 break; 787 case hid_feature: 788 if (hi.collevel == 1 && touch_coll && hi.usage == 789 HID_USAGE2(HUP_MICROSOFT, HUMS_THQA_CERT)) { 790 sc->thqa_cert_rid = hi.report_ID; 791 break; 792 } 793 if (hi.collevel == 1 && touch_coll && hi.usage == 794 HID_USAGE2(HUP_DIGITIZERS, HUD_CONTACT_MAX)) { 795 cont_count_max = hi.logical_maximum; 796 sc->cont_max_rid = hi.report_ID; 797 sc->cont_max_loc = hi.loc; 798 break; 799 } 800 if (hi.collevel == 1 && touch_coll && hi.usage == 801 HID_USAGE2(HUP_DIGITIZERS, HUD_BUTTON_TYPE)) { 802 sc->btn_type_rid = hi.report_ID; 803 sc->btn_type_loc = hi.loc; 804 } 805 break; 806 default: 807 break; 808 } 809 } 810 hid_end_parse(hd); 811 812 if (type == WMT_TYPE_UNSUPPORTED) 813 return (WMT_TYPE_UNSUPPORTED); 814 /* Maximum contact count is required usage */ 815 if (sc->cont_max_rid == 0) 816 return (WMT_TYPE_UNSUPPORTED); 817 818 touch_coll = false; 819 820 /* Parse input for other parameters */ 821 hd = hid_start_parse(d_ptr, d_len, 1 << hid_input); 822 while (hid_get_item(hd, &hi)) { 823 switch (hi.kind) { 824 case hid_collection: 825 if (hi.collevel == 1 && hi.usage == 826 HID_USAGE2(HUP_DIGITIZERS, HUD_TOUCHSCREEN)) 827 touch_coll = true; 828 else if (touch_coll && hi.collevel == 2 && 829 (report_id == 0 || report_id == hi.report_ID) && 830 hi.usage == HID_USAGE2(HUP_DIGITIZERS, HUD_FINGER)) 831 finger_coll = true; 832 break; 833 case hid_endcollection: 834 if (hi.collevel == 1 && finger_coll) { 835 finger_coll = false; 836 cont++; 837 } else if (hi.collevel == 0 && touch_coll) 838 touch_coll = false; 839 break; 840 case hid_input: 841 /* 842 * Ensure that all usages are located within the same 843 * report and proper collection. 844 */ 845 if (WMT_HI_ABSOLUTE(hi) && touch_coll && 846 (report_id == 0 || report_id == hi.report_ID)) 847 report_id = hi.report_ID; 848 else 849 break; 850 851 if (hi.collevel == 1 && left_btn == 2 && 852 hi.usage == HID_USAGE2(HUP_BUTTON, 1)) { 853 has_int_button = true; 854 sc->int_btn_loc = hi.loc; 855 break; 856 } 857 if (hi.collevel == 1 && 858 hi.usage >= HID_USAGE2(HUP_BUTTON, left_btn) && 859 hi.usage <= HID_USAGE2(HUP_BUTTON, WMT_BTN_MAX)) { 860 btn = (hi.usage & 0xFFFF) - left_btn; 861 setbit(sc->buttons, btn); 862 sc->btn_loc[btn] = hi.loc; 863 if (btn >= sc->max_button) 864 sc->max_button = btn + 1; 865 break; 866 } 867 if (hi.collevel == 1 && hi.usage == 868 HID_USAGE2(HUP_DIGITIZERS, HUD_CONTACTCOUNT)) { 869 cont_count_found = true; 870 sc->cont_count_loc = hi.loc; 871 break; 872 } 873 /* Scan time is required but clobbered by evdev */ 874 if (hi.collevel == 1 && hi.usage == 875 HID_USAGE2(HUP_DIGITIZERS, HUD_SCAN_TIME)) { 876 scan_time_found = true; 877 sc->scan_time_loc = hi.loc; 878 sc->scan_time_max = hi.logical_maximum; 879 break; 880 } 881 882 if (!finger_coll || hi.collevel != 2) 883 break; 884 if (cont >= MAX_MT_SLOTS) { 885 DPRINTF("Finger %zu ignored\n", cont); 886 break; 887 } 888 889 for (i = 0; i < WMT_N_USAGES; i++) { 890 if (hi.usage == wmt_hid_map[i].usage) { 891 /* 892 * HUG_X usage is an array mapped to 893 * both ABS_MT_POSITION and ABS_MT_TOOL 894 * events. So don`t stop search if we 895 * already have HUG_X mapping done. 896 */ 897 if (sc->locs[cont][i].size) 898 continue; 899 sc->locs[cont][i] = hi.loc; 900 /* 901 * Hid parser returns valid logical and 902 * physical sizes for first finger only 903 * at least on ElanTS 0x04f3:0x0012. 904 */ 905 if (cont > 0) 906 break; 907 setbit(sc->caps, i); 908 sc->ai[i] = (struct wmt_absinfo) { 909 .max = hi.logical_maximum, 910 .min = hi.logical_minimum, 911 .res = hid_item_resolution(&hi), 912 }; 913 break; 914 } 915 } 916 break; 917 default: 918 break; 919 } 920 } 921 hid_end_parse(hd); 922 923 /* Check for required HID Usages */ 924 if (!cont_count_found || !scan_time_found || cont == 0) 925 return (WMT_TYPE_UNSUPPORTED); 926 for (i = 0; i < WMT_N_USAGES; i++) { 927 if (wmt_hid_map[i].required && isclr(sc->caps, i)) 928 return (WMT_TYPE_UNSUPPORTED); 929 } 930 931 /* Touchpads must have at least one button */ 932 if (type == WMT_TYPE_TOUCHPAD && !sc->max_button && !has_int_button) 933 return (WMT_TYPE_UNSUPPORTED); 934 935 /* 936 * According to specifications 'Contact Count Maximum' should be read 937 * from Feature Report rather than from HID descriptor. Set sane 938 * default value now to handle the case of 'Get Report' request failure 939 */ 940 if (cont_count_max < 1) 941 cont_count_max = cont; 942 943 /* Report touch orientation if both width and height are supported */ 944 if (isset(sc->caps, WMT_WIDTH) && isset(sc->caps, WMT_HEIGHT)) { 945 setbit(sc->caps, WMT_ORIENTATION); 946 sc->ai[WMT_ORIENTATION].max = 1; 947 } 948 949 sc->isize = hid_report_size_max(d_ptr, d_len, hid_input, NULL); 950 sc->report_len = hid_report_size(d_ptr, d_len, hid_input, 951 report_id); 952 sc->cont_max_rlen = hid_report_size(d_ptr, d_len, hid_feature, 953 sc->cont_max_rid); 954 if (sc->btn_type_rid > 0) 955 sc->btn_type_rlen = hid_report_size(d_ptr, d_len, 956 hid_feature, sc->btn_type_rid); 957 if (sc->thqa_cert_rid > 0) 958 sc->thqa_cert_rlen = hid_report_size(d_ptr, d_len, 959 hid_feature, sc->thqa_cert_rid); 960 961 sc->report_id = report_id; 962 sc->nconts_per_report = cont; 963 sc->has_int_button = has_int_button; 964 sc->cont_count_max = cont_count_max; 965 966 return (type); 967 } 968 969 static int 970 wmt_set_input_mode(struct wmt_softc *sc, enum wmt_input_mode mode) 971 { 972 struct usb_attach_arg *uaa = device_get_ivars(sc->dev); 973 int err; 974 975 if (sc->input_mode_rlen < 3 || sc->input_mode_rlen > WMT_BSIZE) { 976 DPRINTF("Feature report %hhu size invalid or too large: %u\n", 977 sc->input_mode_rid, sc->input_mode_rlen); 978 return (USB_ERR_BAD_BUFSIZE); 979 } 980 981 /* Input Mode report is not strictly required to be readable */ 982 err = usbd_req_get_report(uaa->device, NULL, sc->buf, 983 sc->input_mode_rlen, uaa->info.bIfaceIndex, 984 UHID_FEATURE_REPORT, sc->input_mode_rid); 985 if (err != USB_ERR_NORMAL_COMPLETION) 986 bzero(sc->buf + 1, sc->input_mode_rlen - 1); 987 988 sc->buf[0] = sc->input_mode_rid; 989 hid_put_udata(sc->buf + 1, sc->input_mode_rlen - 1, 990 &sc->input_mode_loc, mode); 991 err = usbd_req_set_report(uaa->device, NULL, sc->buf, 992 sc->input_mode_rlen, uaa->info.bIfaceIndex, 993 UHID_FEATURE_REPORT, sc->input_mode_rid); 994 995 return (err); 996 } 997 998 static const STRUCT_USB_HOST_ID wmt_devs[] = { 999 /* generic HID class w/o boot interface */ 1000 {USB_IFACE_CLASS(UICLASS_HID), 1001 USB_IFACE_SUBCLASS(0),}, 1002 }; 1003 1004 static device_method_t wmt_methods[] = { 1005 DEVMETHOD(device_probe, wmt_probe), 1006 DEVMETHOD(device_attach, wmt_attach), 1007 DEVMETHOD(device_detach, wmt_detach), 1008 1009 DEVMETHOD_END 1010 }; 1011 1012 static driver_t wmt_driver = { 1013 .name = "wmt", 1014 .methods = wmt_methods, 1015 .size = sizeof(struct wmt_softc), 1016 }; 1017 1018 DRIVER_MODULE(wmt, uhub, wmt_driver, NULL, NULL); 1019 MODULE_DEPEND(wmt, usb, 1, 1, 1); 1020 MODULE_DEPEND(wmt, hid, 1, 1, 1); 1021 MODULE_DEPEND(wmt, evdev, 1, 1, 1); 1022 MODULE_VERSION(wmt, 1); 1023 USB_PNP_HOST_INFO(wmt_devs); 1024