1 /*- 2 * Copyright 2004 by Peter Grehan. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. The name of the author may not be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 20 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 21 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 22 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 23 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 */ 28 #include <sys/cdefs.h> 29 __FBSDID("$FreeBSD$"); 30 31 /* 32 * Mac 'Kauai' PCI ATA controller 33 */ 34 #include <sys/param.h> 35 #include <sys/systm.h> 36 #include <sys/kernel.h> 37 #include <sys/module.h> 38 #include <sys/bus.h> 39 #include <sys/malloc.h> 40 #include <sys/sema.h> 41 #include <sys/taskqueue.h> 42 #include <vm/uma.h> 43 #include <machine/stdarg.h> 44 #include <machine/resource.h> 45 #include <machine/bus.h> 46 #include <sys/rman.h> 47 #include <sys/ata.h> 48 #include <dev/ata/ata-all.h> 49 #include <ata_if.h> 50 51 #include <dev/ofw/openfirm.h> 52 #include <dev/ofw/ofw_bus.h> 53 #include <machine/intr_machdep.h> 54 55 #include <dev/pci/pcivar.h> 56 #include <dev/pci/pcireg.h> 57 58 #include "ata_dbdma.h" 59 60 #define ATA_KAUAI_REGOFFSET 0x2000 61 #define ATA_KAUAI_DBDMAOFFSET 0x1000 62 63 /* 64 * Offset to alt-control register from base 65 */ 66 #define ATA_KAUAI_ALTOFFSET (ATA_KAUAI_REGOFFSET + 0x160) 67 68 /* 69 * Define the gap between registers 70 */ 71 #define ATA_KAUAI_REGGAP 16 72 73 /* 74 * PIO and DMA access registers 75 */ 76 #define PIO_CONFIG_REG (ATA_KAUAI_REGOFFSET + 0x200) 77 #define UDMA_CONFIG_REG (ATA_KAUAI_REGOFFSET + 0x210) 78 #define DMA_IRQ_REG (ATA_KAUAI_REGOFFSET + 0x300) 79 80 #define USE_DBDMA_IRQ 0 81 82 /* 83 * Define the kauai pci bus attachment. 84 */ 85 static int ata_kauai_probe(device_t dev); 86 static int ata_kauai_attach(device_t dev); 87 static int ata_kauai_setmode(device_t dev, int target, int mode); 88 static int ata_kauai_begin_transaction(struct ata_request *request); 89 90 static device_method_t ata_kauai_methods[] = { 91 /* Device interface */ 92 DEVMETHOD(device_probe, ata_kauai_probe), 93 DEVMETHOD(device_attach, ata_kauai_attach), 94 DEVMETHOD(device_detach, bus_generic_detach), 95 DEVMETHOD(device_shutdown, bus_generic_shutdown), 96 DEVMETHOD(device_suspend, bus_generic_suspend), 97 DEVMETHOD(device_resume, bus_generic_resume), 98 99 /* ATA interface */ 100 DEVMETHOD(ata_setmode, ata_kauai_setmode), 101 DEVMETHOD_END 102 }; 103 104 struct ata_kauai_softc { 105 struct ata_dbdma_channel sc_ch; 106 107 struct resource *sc_memr; 108 109 int shasta; 110 111 uint32_t udmaconf[2]; 112 uint32_t wdmaconf[2]; 113 uint32_t pioconf[2]; 114 }; 115 116 static driver_t ata_kauai_driver = { 117 "ata", 118 ata_kauai_methods, 119 sizeof(struct ata_kauai_softc), 120 }; 121 122 DRIVER_MODULE(ata, pci, ata_kauai_driver, ata_devclass, NULL, NULL); 123 MODULE_DEPEND(ata, ata, 1, 1, 1); 124 125 /* 126 * PCI ID search table 127 */ 128 static const struct kauai_pci_dev { 129 u_int32_t kpd_devid; 130 const char *kpd_desc; 131 } kauai_pci_devlist[] = { 132 { 0x0033106b, "Uninorth2 Kauai ATA Controller" }, 133 { 0x003b106b, "Intrepid Kauai ATA Controller" }, 134 { 0x0043106b, "K2 Kauai ATA Controller" }, 135 { 0x0050106b, "Shasta Kauai ATA Controller" }, 136 { 0x0069106b, "Intrepid-2 Kauai ATA Controller" }, 137 { 0, NULL } 138 }; 139 140 /* 141 * IDE transfer timings 142 */ 143 #define KAUAI_PIO_MASK 0xff000fff 144 #define KAUAI_DMA_MASK 0x00fff000 145 #define KAUAI_UDMA_MASK 0x0000ffff 146 147 static const u_int pio_timing_kauai[] = { 148 0x08000a92, /* PIO0 */ 149 0x0800060f, /* PIO1 */ 150 0x0800038b, /* PIO2 */ 151 0x05000249, /* PIO3 */ 152 0x04000148 /* PIO4 */ 153 }; 154 155 static const u_int pio_timing_shasta[] = { 156 0x0a000c97, /* PIO0 */ 157 0x07000712, /* PIO1 */ 158 0x040003cd, /* PIO2 */ 159 0x0400028b, /* PIO3 */ 160 0x0400010a /* PIO4 */ 161 }; 162 163 static const u_int dma_timing_kauai[] = { 164 0x00618000, /* WDMA0 */ 165 0x00209000, /* WDMA1 */ 166 0x00148000 /* WDMA2 */ 167 }; 168 169 static const u_int dma_timing_shasta[] = { 170 0x00820800, /* WDMA0 */ 171 0x0028b000, /* WDMA1 */ 172 0x001ca000 /* WDMA2 */ 173 }; 174 175 static const u_int udma_timing_kauai[] = { 176 0x000070c1, /* UDMA0 */ 177 0x00005d81, /* UDMA1 */ 178 0x00004a61, /* UDMA2 */ 179 0x00003a51, /* UDMA3 */ 180 0x00002a31, /* UDMA4 */ 181 0x00002921 /* UDMA5 */ 182 }; 183 184 static const u_int udma_timing_shasta[] = { 185 0x00035901, /* UDMA0 */ 186 0x000348b1, /* UDMA1 */ 187 0x00033881, /* UDMA2 */ 188 0x00033861, /* UDMA3 */ 189 0x00033841, /* UDMA4 */ 190 0x00033031, /* UDMA5 */ 191 0x00033021 /* UDMA6 */ 192 }; 193 194 static int 195 ata_kauai_probe(device_t dev) 196 { 197 struct ata_channel *ch; 198 struct ata_kauai_softc *sc; 199 u_int32_t devid; 200 phandle_t node; 201 const char *compatstring = NULL; 202 int i, found, rid; 203 204 found = 0; 205 devid = pci_get_devid(dev); 206 for (i = 0; kauai_pci_devlist[i].kpd_desc != NULL; i++) { 207 if (devid == kauai_pci_devlist[i].kpd_devid) { 208 found = 1; 209 device_set_desc(dev, kauai_pci_devlist[i].kpd_desc); 210 } 211 } 212 213 if (!found) 214 return (ENXIO); 215 216 node = ofw_bus_get_node(dev); 217 sc = device_get_softc(dev); 218 bzero(sc, sizeof(struct ata_kauai_softc)); 219 ch = &sc->sc_ch.sc_ch; 220 221 compatstring = ofw_bus_get_compat(dev); 222 if (compatstring != NULL && strcmp(compatstring,"shasta-ata") == 0) 223 sc->shasta = 1; 224 225 /* Pre-K2 controllers apparently need this hack */ 226 if (!sc->shasta && 227 (compatstring == NULL || strcmp(compatstring, "K2-UATA") != 0)) 228 bus_set_resource(dev, SYS_RES_IRQ, 0, 39, 1); 229 230 rid = PCIR_BARS; 231 sc->sc_memr = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 232 RF_ACTIVE); 233 if (sc->sc_memr == NULL) { 234 device_printf(dev, "could not allocate memory\n"); 235 return (ENXIO); 236 } 237 238 /* 239 * Set up the resource vectors 240 */ 241 for (i = ATA_DATA; i <= ATA_COMMAND; i++) { 242 ch->r_io[i].res = sc->sc_memr; 243 ch->r_io[i].offset = i*ATA_KAUAI_REGGAP + ATA_KAUAI_REGOFFSET; 244 } 245 ch->r_io[ATA_CONTROL].res = sc->sc_memr; 246 ch->r_io[ATA_CONTROL].offset = ATA_KAUAI_ALTOFFSET; 247 ata_default_registers(dev); 248 249 ch->unit = 0; 250 ch->flags |= ATA_USE_16BIT; 251 252 /* XXX: ATAPI DMA is unreliable. We should find out why. */ 253 ch->flags |= ATA_NO_ATAPI_DMA; 254 ata_generic_hw(dev); 255 256 return (ata_probe(dev)); 257 } 258 259 #if USE_DBDMA_IRQ 260 static int 261 ata_kauai_dma_interrupt(struct ata_kauai_softc *sc) 262 { 263 /* Clear the DMA interrupt bits */ 264 265 bus_write_4(sc->sc_memr, DMA_IRQ_REG, 0x80000000); 266 267 return ata_interrupt(sc); 268 } 269 #endif 270 271 static int 272 ata_kauai_attach(device_t dev) 273 { 274 struct ata_kauai_softc *sc = device_get_softc(dev); 275 #if USE_DBDMA_IRQ 276 int dbdma_irq_rid = 1; 277 struct resource *dbdma_irq; 278 void *cookie; 279 #endif 280 281 pci_enable_busmaster(dev); 282 283 /* Init DMA engine */ 284 285 sc->sc_ch.dbdma_rid = 1; 286 sc->sc_ch.dbdma_regs = sc->sc_memr; 287 sc->sc_ch.dbdma_offset = ATA_KAUAI_DBDMAOFFSET; 288 289 ata_dbdma_dmainit(dev); 290 291 #if USE_DBDMA_IRQ 292 /* Bind to DBDMA interrupt as well */ 293 if ((dbdma_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, 294 &dbdma_irq_rid, RF_SHAREABLE | RF_ACTIVE)) != NULL) { 295 bus_setup_intr(dev, dbdma_irq, ATA_INTR_FLAGS, NULL, 296 (driver_intr_t *)ata_kauai_dma_interrupt, sc,&cookie); 297 } 298 #endif 299 300 /* Set up initial mode */ 301 sc->pioconf[0] = sc->pioconf[1] = 302 bus_read_4(sc->sc_memr, PIO_CONFIG_REG) & 0x0f000fff; 303 304 sc->udmaconf[0] = sc->udmaconf[1] = 0; 305 sc->wdmaconf[0] = sc->wdmaconf[1] = 0; 306 307 /* Magic FCR value from Apple */ 308 bus_write_4(sc->sc_memr, 0, 0x00000007); 309 310 /* Set begin_transaction */ 311 sc->sc_ch.sc_ch.hw.begin_transaction = ata_kauai_begin_transaction; 312 313 return ata_attach(dev); 314 } 315 316 static int 317 ata_kauai_setmode(device_t dev, int target, int mode) 318 { 319 struct ata_kauai_softc *sc = device_get_softc(dev); 320 321 mode = min(mode,sc->shasta ? ATA_UDMA6 : ATA_UDMA5); 322 323 if (sc->shasta) { 324 switch (mode & ATA_DMA_MASK) { 325 case ATA_UDMA0: 326 sc->udmaconf[target] 327 = udma_timing_shasta[mode & ATA_MODE_MASK]; 328 break; 329 case ATA_WDMA0: 330 sc->udmaconf[target] = 0; 331 sc->wdmaconf[target] 332 = dma_timing_shasta[mode & ATA_MODE_MASK]; 333 break; 334 default: 335 sc->pioconf[target] 336 = pio_timing_shasta[(mode & ATA_MODE_MASK) - 337 ATA_PIO0]; 338 break; 339 } 340 } else { 341 switch (mode & ATA_DMA_MASK) { 342 case ATA_UDMA0: 343 sc->udmaconf[target] 344 = udma_timing_kauai[mode & ATA_MODE_MASK]; 345 break; 346 case ATA_WDMA0: 347 sc->udmaconf[target] = 0; 348 sc->wdmaconf[target] 349 = dma_timing_kauai[mode & ATA_MODE_MASK]; 350 break; 351 default: 352 sc->pioconf[target] 353 = pio_timing_kauai[(mode & ATA_MODE_MASK) 354 - ATA_PIO0]; 355 break; 356 } 357 } 358 359 return (mode); 360 } 361 362 static int 363 ata_kauai_begin_transaction(struct ata_request *request) 364 { 365 struct ata_kauai_softc *sc = device_get_softc(request->parent); 366 367 bus_write_4(sc->sc_memr, UDMA_CONFIG_REG, sc->udmaconf[request->unit]); 368 bus_write_4(sc->sc_memr, PIO_CONFIG_REG, 369 sc->wdmaconf[request->unit] | sc->pioconf[request->unit]); 370 371 return ata_begin_transaction(request); 372 } 373