xref: /freebsd/sys/powerpc/powermac/uninorthpci.c (revision 2f513db7)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (C) 2002 Benno Rice.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY Benno Rice ``AS IS'' AND ANY EXPRESS OR
17  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19  * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
20  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
21  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
22  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
23  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
24  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
25  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26  */
27 
28 #include <sys/cdefs.h>
29 __FBSDID("$FreeBSD$");
30 
31 #include <sys/param.h>
32 #include <sys/systm.h>
33 #include <sys/module.h>
34 #include <sys/bus.h>
35 #include <sys/conf.h>
36 #include <sys/kernel.h>
37 #include <sys/lock.h>
38 #include <sys/mutex.h>
39 #include <sys/rman.h>
40 
41 #include <dev/ofw/openfirm.h>
42 #include <dev/ofw/ofw_pci.h>
43 #include <dev/ofw/ofw_bus.h>
44 #include <dev/ofw/ofw_bus_subr.h>
45 #include <dev/ofw/ofwpci.h>
46 
47 #include <dev/pci/pcivar.h>
48 #include <dev/pci/pcireg.h>
49 
50 #include <machine/bus.h>
51 #include <machine/intr_machdep.h>
52 #include <machine/md_var.h>
53 #include <machine/pio.h>
54 #include <machine/resource.h>
55 
56 #include <powerpc/powermac/uninorthvar.h>
57 
58 #include <vm/vm.h>
59 #include <vm/pmap.h>
60 
61 #include "pcib_if.h"
62 
63 #define	UNINORTH_DEBUG	0
64 
65 /*
66  * Device interface.
67  */
68 static int		uninorth_probe(device_t);
69 static int		uninorth_attach(device_t);
70 
71 /*
72  * pcib interface.
73  */
74 static u_int32_t	uninorth_read_config(device_t, u_int, u_int, u_int,
75 			    u_int, int);
76 static void		uninorth_write_config(device_t, u_int, u_int, u_int,
77 			    u_int, u_int32_t, int);
78 
79 /*
80  * Local routines.
81  */
82 static int		uninorth_enable_config(struct uninorth_softc *, u_int,
83 			    u_int, u_int, u_int);
84 
85 /*
86  * Driver methods.
87  */
88 static device_method_t	uninorth_methods[] = {
89 	/* Device interface */
90 	DEVMETHOD(device_probe,		uninorth_probe),
91 	DEVMETHOD(device_attach,	uninorth_attach),
92 
93 	/* pcib interface */
94 	DEVMETHOD(pcib_read_config,	uninorth_read_config),
95 	DEVMETHOD(pcib_write_config,	uninorth_write_config),
96 
97 	DEVMETHOD_END
98 };
99 
100 static devclass_t	uninorth_devclass;
101 
102 DEFINE_CLASS_1(pcib, uninorth_driver, uninorth_methods,
103     sizeof(struct uninorth_softc), ofw_pci_driver);
104 EARLY_DRIVER_MODULE(uninorth, ofwbus, uninorth_driver, uninorth_devclass, 0, 0,
105     BUS_PASS_BUS);
106 
107 static int
108 uninorth_probe(device_t dev)
109 {
110 	const char	*type, *compatible;
111 
112 	type = ofw_bus_get_type(dev);
113 	compatible = ofw_bus_get_compat(dev);
114 
115 	if (type == NULL || compatible == NULL)
116 		return (ENXIO);
117 
118 	if (strcmp(type, "pci") != 0)
119 		return (ENXIO);
120 
121 	if (strcmp(compatible, "uni-north") == 0) {
122 		device_set_desc(dev, "Apple UniNorth Host-PCI bridge");
123 		return (0);
124 	} else if (strcmp(compatible, "u3-agp") == 0) {
125 		device_set_desc(dev, "Apple U3 Host-AGP bridge");
126 		return (0);
127 	} else if (strcmp(compatible, "u4-pcie") == 0) {
128 		device_set_desc(dev, "IBM CPC945 PCI Express Root");
129 		return (0);
130 	}
131 
132 	return (ENXIO);
133 }
134 
135 static int
136 uninorth_attach(device_t dev)
137 {
138 	struct		uninorth_softc *sc;
139 	const char	*compatible;
140 	const char	*name;
141 	phandle_t	node;
142 	uint32_t	reg[3];
143 	uint64_t	regbase;
144 	cell_t		acells;
145 	int		unit;
146 
147 	node = ofw_bus_get_node(dev);
148 	sc = device_get_softc(dev);
149 	name = device_get_name(dev);
150 	unit = device_get_unit(dev);
151 
152 	if (OF_getprop(node, "reg", reg, sizeof(reg)) < 8)
153 		return (ENXIO);
154 
155 	sc->sc_ver = 0;
156 	compatible = ofw_bus_get_compat(dev);
157 	if (strcmp(compatible, "u3-agp") == 0)
158 		sc->sc_ver = 3;
159 	if (strcmp(compatible, "u4-pcie") == 0)
160 		sc->sc_ver = 4;
161 
162 	acells = 1;
163 	OF_getprop(OF_parent(node), "#address-cells", &acells, sizeof(acells));
164 
165 	regbase = reg[0];
166 	if (acells == 2) {
167 		regbase <<= 32;
168 		regbase |= reg[1];
169 	}
170 
171 	sc->sc_addr = (vm_offset_t)pmap_mapdev(regbase + 0x800000, PAGE_SIZE);
172 	sc->sc_data = (vm_offset_t)pmap_mapdev(regbase + 0xc00000, PAGE_SIZE);
173 
174 	if (resource_int_value(name, unit, "skipslot", &sc->sc_skipslot) != 0)
175 		sc->sc_skipslot = -1;
176 
177 	mtx_init(&sc->sc_cfg_mtx, "uninorth pcicfg", NULL, MTX_SPIN);
178 
179 	return (ofw_pci_attach(dev));
180 }
181 
182 static u_int32_t
183 uninorth_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
184     int width)
185 {
186 	struct		uninorth_softc *sc;
187 	vm_offset_t	caoff;
188 	u_int32_t	val;
189 
190 	sc = device_get_softc(dev);
191 	caoff = sc->sc_data + (reg & 0x07);
192 	val = 0xffffffff;
193 
194 	mtx_lock_spin(&sc->sc_cfg_mtx);
195 	if (uninorth_enable_config(sc, bus, slot, func, reg) != 0) {
196 		switch (width) {
197 		case 1:
198 			val = in8rb(caoff);
199 			break;
200 		case 2:
201 			val = in16rb(caoff);
202 			break;
203 		case 4:
204 			val = in32rb(caoff);
205 			break;
206 		}
207 	}
208 	mtx_unlock_spin(&sc->sc_cfg_mtx);
209 
210 	return (val);
211 }
212 
213 static void
214 uninorth_write_config(device_t dev, u_int bus, u_int slot, u_int func,
215     u_int reg, u_int32_t val, int width)
216 {
217 	struct		uninorth_softc *sc;
218 	vm_offset_t	caoff;
219 
220 	sc = device_get_softc(dev);
221 	caoff = sc->sc_data + (reg & 0x07);
222 
223 	mtx_lock_spin(&sc->sc_cfg_mtx);
224 	if (uninorth_enable_config(sc, bus, slot, func, reg)) {
225 		switch (width) {
226 		case 1:
227 			out8rb(caoff, val);
228 			break;
229 		case 2:
230 			out16rb(caoff, val);
231 			break;
232 		case 4:
233 			out32rb(caoff, val);
234 			break;
235 		}
236 	}
237 	mtx_unlock_spin(&sc->sc_cfg_mtx);
238 }
239 
240 static int
241 uninorth_enable_config(struct uninorth_softc *sc, u_int bus, u_int slot,
242     u_int func, u_int reg)
243 {
244 	uint32_t	cfgval;
245 
246 	mtx_assert(&sc->sc_cfg_mtx, MA_OWNED);
247 
248 	if (sc->sc_skipslot == slot)
249 		return (0);
250 
251 	/*
252 	 * Issue type 0 configuration space accesses for the root bus.
253 	 *
254 	 * NOTE: On U4, issue only type 1 accesses. There is a secret
255 	 * PCI Express <-> PCI Express bridge not present in the device tree,
256 	 * and we need to route all of our configuration space through it.
257 	 */
258 	if (sc->pci_sc.sc_bus == bus && sc->sc_ver < 4) {
259 		/*
260 		 * No slots less than 11 on the primary bus on U3 and lower
261 		 */
262 		if (slot < 11)
263 			return (0);
264 
265 		cfgval = (1 << slot) | (func << 8) | (reg & 0xfc);
266 	} else {
267 		cfgval = (bus << 16) | (slot << 11) | (func << 8) |
268 		    (reg & 0xfc) | 1;
269 	}
270 
271 	/* Set extended register bits on U4 */
272 	if (sc->sc_ver == 4)
273 		cfgval |= (reg >> 8) << 28;
274 
275 	do {
276 		out32rb(sc->sc_addr, cfgval);
277 	} while (in32rb(sc->sc_addr) != cfgval);
278 
279 	return (1);
280 }
281 
282