1.\" 2.\" Automated Testing Framework (atf) 3.\" 4.\" Copyright (c) 2007 The NetBSD Foundation, Inc. 5.\" All rights reserved. 6.\" 7.\" Redistribution and use in source and binary forms, with or without 8.\" modification, are permitted provided that the following conditions 9.\" are met: 10.\" 1. Redistributions of source code must retain the above copyright 11.\" notice, this list of conditions and the following disclaimer. 12.\" 2. Redistributions in binary form must reproduce the above copyright 13.\" notice, this list of conditions and the following disclaimer in the 14.\" documentation and/or other materials provided with the distribution. 15.\" 16.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND 17.\" CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, 18.\" INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 19.\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20.\" IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY 21.\" DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE 23.\" GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 25.\" IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 26.\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN 27.\" IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28.\" 29.Dd January 13, 2011 30.Dt ATF-TEST-CASE 4 31.Os 32.Sh NAME 33.Nm atf-test-case 34.Nd generic description of test cases 35.Sh DESCRIPTION 36A 37.Em test case 38is a piece of code that stress-tests a specific feature of the software. 39This feature is typically self-contained enough, either in the amount of 40code that implements it or in the general idea that describes it, to 41warrant its independent testing. 42Given this, test cases are very fine-grained, but they attempt to group 43similar smaller tests which are semantically related. 44.Pp 45A test case is defined by three components regardless of the language it is 46implemented in: a header, a body and a cleanup routine. 47The 48.Em header 49is, basically, a declarative piece of code that defines several 50properties to describe what the test case does and how it behaves. 51In other words: it defines the test case's 52.Em meta-data , 53further described in the 54.Sx Meta-data 55section. 56The 57.Em body 58is the test case itself. 59It executes all actions needed to reproduce the test, and checks for 60failures. 61This body is only executed if the abstract conditions specified by the 62header are met. 63The 64.Em cleanup 65routine is a piece of code always executed after the body, regardless of 66the exit status of the test case. 67It can be used to undo side-effects of the test case. 68Note that almost all side-effects of a test case are automatically cleaned 69up by the library; this is explained in more detail in the rest of this 70document. 71.Pp 72It is extremely important to keep the separation between a test case's 73header and body well-defined, because the header is 74.Em always 75parsed, whereas the body is only executed when the conditions defined in 76the header are met and when the user specifies that test case. 77.Pp 78At last, test cases are always contained into test programs. 79The test programs act as a front-end to them, providing a consistent 80interface to the user and several APIs to ease their implementation. 81.Ss Results 82Upon termination, a test case reports a status and, optionally, a textual 83reason describing why the test reported such status. 84The caller must ensure that the test case really performed the task that its 85status describes, as the test program may be bogus and therefore providing a 86misleading result (e.g. providing a result that indicates success but the 87error code of the program says otherwise). 88.Pp 89The possible exit status of a test case are one of the following: 90.Bl -tag -width expectedXfailureXX 91.It expected_death 92The test case expects to terminate abruptly. 93.It expected_exit 94The test case expects to exit cleanly. 95.It expected_failure 96The test case expects to exit with a controller fatal/non-fatal failure. 97If this happens, the test program exits with a success error code. 98.It expected_signal 99The test case expects to receive a signal that makes it terminate. 100.It expected_timeout 101The test case expects to execute for longer than its timeout. 102.It passed 103The test case was executed successfully. 104The test program exits with a success error code. 105.It skipped 106The test case could not be executed because some preconditions were not 107met. 108This is not a failure because it can typically be resolved by adjusting 109the system to meet the necessary conditions. 110This is always accompanied by a 111.Em reason , 112a message describing why the test was skipped. 113The test program exits with a success error code. 114.It failed 115An error appeared during the execution of the test case. 116This is always accompanied by a 117.Em reason , 118a message describing why the test failed. 119The test program exits with a failure error code. 120.El 121.Pp 122The usefulness of the 123.Sq expected_* 124results comes when writing test cases that verify known failures caused, 125in general, due to programming errors (aka bugs). 126Whenever the faulty condition that the 127.Sq expected_* 128result is trying to cover is fixed, then the test case will be reported as 129.Sq failed 130and the developer will have to adjust it to match its new condition. 131.Pp 132It is important to note that all 133.Sq expected_* 134results are only provided as a 135.Em hint 136to the caller; the caller must verify that the test case did actually terminate 137as the expected condition says. 138.Ss Input/output 139Test cases are free to print whatever they want to their 140.Xr stdout 4 141and 142.Xr stderr 4 143file descriptors. 144They are, in fact, encouraged to print status information as they execute 145to keep the user informed of their actions. 146This is specially important for long test cases. 147.Pp 148Test cases will log their results to an auxiliary file, which is then 149collected by the test program they are contained in. 150The developer need not care about this as long as he uses the correct 151APIs to implement the test cases. 152.Pp 153The standard input of the test cases is unconditionally connected to 154.Sq /dev/zero . 155.Ss Meta-data 156The following list describes all meta-data properties interpreted 157internally by ATF. 158You are free to define new properties in your test cases and use them as 159you wish, but non-standard properties must be prefixed by 160.Sq X- . 161.Bl -tag -width requireXmachineXX 162.It descr 163Type: textual. 164Required. 165.Pp 166A brief textual description of the test case's purpose. 167Will be shown to the user in reports. 168Also good for documentation purposes. 169.It has.cleanup 170Type: boolean. 171Optional. 172.Pp 173If set to true, specifies that the test case has a cleanup routine that has 174to be executed by 175.Xr atf-run 1 176during the cleanup phase of the execution. 177This property is automatically set by the framework when defining a test case 178with a cleanup routine, so it should never be set by hand. 179.It ident 180Type: textual. 181Required. 182.Pp 183The test case's identifier. 184Must be unique inside the test program and should be short but descriptive. 185.It require.arch 186Type: textual. 187Optional. 188.Pp 189A whitespace separated list of architectures that the test case can be run 190under without causing errors due to an architecture mismatch. 191.It require.config 192Type: textual. 193Optional. 194.Pp 195A whitespace separated list of configuration variables that must be defined 196to execute the test case. 197If any of the required variables is not defined, the test case is 198.Em skipped . 199.It require.files 200Type: textual. 201Optional. 202.Pp 203A whitespace separated list of files that must be present to execute the 204test case. 205The names of these files must be absolute paths. 206If any of the required files is not found, the test case is 207.Em skipped . 208.It require.machine 209Type: textual. 210Optional. 211.Pp 212A whitespace separated list of machine types that the test case can be run 213under without causing errors due to a machine type mismatch. 214.It require.memory 215Type: integer. 216Optional. 217Specifies the minimum amount of physical memory needed by the test. 218The value can have a size suffix such as 219.Sq K , 220.Sq M , 221.Sq G 222or 223.Sq T 224to make the amount of bytes easier to type and read. 225.It require.progs 226Type: textual. 227Optional. 228.Pp 229A whitespace separated list of programs that must be present to execute 230the test case. 231These can be given as plain names, in which case they are looked in the 232user's 233.Ev PATH , 234or as absolute paths. 235If any of the required programs is not found, the test case is 236.Em skipped . 237.It require.user 238Type: textual. 239Optional. 240.Pp 241The required privileges to execute the test case. 242Can be one of 243.Sq root 244or 245.Sq unprivileged . 246.Pp 247If the test case is running as a regular user and this property is 248.Sq root , 249the test case is 250.Em skipped . 251.Pp 252If the test case is running as root and this property is 253.Sq unprivileged , 254.Xr atf-run 1 255will automatically drop the privileges if the 256.Sq unprivileged-user 257configuration property is set; otherwise the test case is 258.Em skipped . 259.It timeout 260Type: integral. 261Optional; defaults to 262.Sq 300 . 263.Pp 264Specifies the maximum amount of time the test case can run. 265This is particularly useful because some tests can stall either because they 266are incorrectly coded or because they trigger an anomalous behavior of the 267program. 268It is not acceptable for these tests to stall the whole execution of the 269test program. 270.Pp 271Can optionally be set to zero, in which case the test case has no run-time 272limit. 273This is discouraged. 274.El 275.Ss Environment 276Every time a test case is executed, several environment variables are 277cleared or reseted to sane values to ensure they do not make the test fail 278due to unexpected conditions. 279These variables are: 280.Bl -tag -width LCXMESSAGESXX 281.It Ev HOME 282Set to the work directory's path. 283.It Ev LANG 284Undefined. 285.It Ev LC_ALL 286Undefined. 287.It Ev LC_COLLATE 288Undefined. 289.It Ev LC_CTYPE 290Undefined. 291.It Ev LC_MESSAGES 292Undefined. 293.It Ev LC_MONETARY 294Undefined. 295.It Ev LC_NUMERIC 296Undefined. 297.It Ev LC_TIME 298Undefined. 299.It Ev TZ 300Hardcoded to 301.Sq UTC . 302.El 303.Ss Work directories 304The test program always creates a temporary directory 305and switches to it before running the test case's body. 306This way the test case is free to modify its current directory as it 307wishes, and the runtime engine will be able to clean it up later on in a 308safe way, removing any traces of its execution from the system. 309To do so, the runtime engine will perform a recursive removal of the work 310directory without crossing mount points; if a mount point is found, the 311file system will be unmounted (if possible). 312.Ss File creation mode mask (umask) 313Test cases are always executed with a file creation mode mask (umask) of 314.Sq 0022 . 315The test case's code is free to change this during execution. 316.Sh SEE ALSO 317.Xr atf-run 1 , 318.Xr atf-test-program 1 , 319.Xr atf-formats 5 , 320.Xr atf 7 321