1 /* 2 dp8390.h 3 4 Created: before Dec 28, 1992 by Philip Homburg 5 */ 6 7 /* National Semiconductor DP8390 Network Interface Controller. */ 8 9 /* Page 0, for reading ------------- */ 10 #define DP_CR 0x0 /* Read side of Command Register */ 11 #define DP_CLDA0 0x1 /* Current Local Dma Address 0 */ 12 #define DP_CLDA1 0x2 /* Current Local Dma Address 1 */ 13 #define DP_BNRY 0x3 /* Boundary Pointer */ 14 #define DP_TSR 0x4 /* Transmit Status Register */ 15 #define DP_NCR 0x5 /* Number of Collisions Register */ 16 #define DP_FIFO 0x6 /* Fifo ?? */ 17 #define DP_ISR 0x7 /* Interrupt Status Register */ 18 #define DP_CRDA0 0x8 /* Current Remote Dma Address 0 */ 19 #define DP_CRDA1 0x9 /* Current Remote Dma Address 1 */ 20 #define DP_DUM1 0xA /* unused */ 21 #define DP_DUM2 0xB /* unused */ 22 #define DP_RSR 0xC /* Receive Status Register */ 23 #define DP_CNTR0 0xD /* Tally Counter 0 */ 24 #define DP_CNTR1 0xE /* Tally Counter 1 */ 25 #define DP_CNTR2 0xF /* Tally Counter 2 */ 26 27 /* Page 0, for writing ------------- */ 28 #define DP_CR 0x0 /* Write side of Command Register */ 29 #define DP_PSTART 0x1 /* Page Start Register */ 30 #define DP_PSTOP 0x2 /* Page Stop Register */ 31 #define DP_BNRY 0x3 /* Boundary Pointer */ 32 #define DP_TPSR 0x4 /* Transmit Page Start Register */ 33 #define DP_TBCR0 0x5 /* Transmit Byte Count Register 0 */ 34 #define DP_TBCR1 0x6 /* Transmit Byte Count Register 1 */ 35 #define DP_ISR 0x7 /* Interrupt Status Register */ 36 #define DP_RSAR0 0x8 /* Remote Start Address Register 0 */ 37 #define DP_RSAR1 0x9 /* Remote Start Address Register 1 */ 38 #define DP_RBCR0 0xA /* Remote Byte Count Register 0 */ 39 #define DP_RBCR1 0xB /* Remote Byte Count Register 1 */ 40 #define DP_RCR 0xC /* Receive Configuration Register */ 41 #define DP_TCR 0xD /* Transmit Configuration Register */ 42 #define DP_DCR 0xE /* Data Configuration Register */ 43 #define DP_IMR 0xF /* Interrupt Mask Register */ 44 45 /* Page 1, read/write -------------- */ 46 #define DP_CR 0x0 /* Command Register */ 47 #define DP_PAR0 0x1 /* Physical Address Register 0 */ 48 #define DP_PAR1 0x2 /* Physical Address Register 1 */ 49 #define DP_PAR2 0x3 /* Physical Address Register 2 */ 50 #define DP_PAR3 0x4 /* Physical Address Register 3 */ 51 #define DP_PAR4 0x5 /* Physical Address Register 4 */ 52 #define DP_PAR5 0x6 /* Physical Address Register 5 */ 53 #define DP_CURR 0x7 /* Current Page Register */ 54 #define DP_MAR0 0x8 /* Multicast Address Register 0 */ 55 #define DP_MAR1 0x9 /* Multicast Address Register 1 */ 56 #define DP_MAR2 0xA /* Multicast Address Register 2 */ 57 #define DP_MAR3 0xB /* Multicast Address Register 3 */ 58 #define DP_MAR4 0xC /* Multicast Address Register 4 */ 59 #define DP_MAR5 0xD /* Multicast Address Register 5 */ 60 #define DP_MAR6 0xE /* Multicast Address Register 6 */ 61 #define DP_MAR7 0xF /* Multicast Address Register 7 */ 62 63 /* Bits in dp_cr */ 64 #define CR_STP 0x01 /* Stop: software reset */ 65 #define CR_STA 0x02 /* Start: activate NIC */ 66 #define CR_TXP 0x04 /* Transmit Packet */ 67 #define CR_DMA 0x38 /* Mask for DMA control */ 68 #define CR_DM_NOP 0x00 /* DMA: No Operation */ 69 #define CR_DM_RR 0x08 /* DMA: Remote Read */ 70 #define CR_DM_RW 0x10 /* DMA: Remote Write */ 71 #define CR_DM_SP 0x18 /* DMA: Send Packet */ 72 #define CR_DM_ABORT 0x20 /* DMA: Abort Remote DMA Operation */ 73 #define CR_PS 0xC0 /* Mask for Page Select */ 74 #define CR_PS_P0 0x00 /* Register Page 0 */ 75 #define CR_PS_P1 0x40 /* Register Page 1 */ 76 #define CR_PS_P2 0x80 /* Register Page 2 */ 77 #define CR_PS_T1 0xC0 /* Test Mode Register Map */ 78 79 /* Bits in dp_isr */ 80 #define ISR_PRX 0x01 /* Packet Received with no errors */ 81 #define ISR_PTX 0x02 /* Packet Transmitted with no errors */ 82 #define ISR_RXE 0x04 /* Receive Error */ 83 #define ISR_TXE 0x08 /* Transmit Error */ 84 #define ISR_OVW 0x10 /* Overwrite Warning */ 85 #define ISR_CNT 0x20 /* Counter Overflow */ 86 #define ISR_RDC 0x40 /* Remote DMA Complete */ 87 #define ISR_RST 0x80 /* Reset Status */ 88 89 /* Bits in dp_imr */ 90 #define IMR_PRXE 0x01 /* Packet Received iEnable */ 91 #define IMR_PTXE 0x02 /* Packet Transmitted iEnable */ 92 #define IMR_RXEE 0x04 /* Receive Error iEnable */ 93 #define IMR_TXEE 0x08 /* Transmit Error iEnable */ 94 #define IMR_OVWE 0x10 /* Overwrite Warning iEnable */ 95 #define IMR_CNTE 0x20 /* Counter Overflow iEnable */ 96 #define IMR_RDCE 0x40 /* DMA Complete iEnable */ 97 98 /* Bits in dp_dcr */ 99 #define DCR_WTS 0x01 /* Word Transfer Select */ 100 #define DCR_BYTEWIDE 0x00 /* WTS: byte wide transfers */ 101 #define DCR_WORDWIDE 0x01 /* WTS: word wide transfers */ 102 #define DCR_BOS 0x02 /* Byte Order Select */ 103 #define DCR_LTLENDIAN 0x00 /* BOS: Little Endian */ 104 #define DCR_BIGENDIAN 0x02 /* BOS: Big Endian */ 105 #define DCR_LAS 0x04 /* Long Address Select */ 106 #define DCR_BMS 0x08 /* Burst Mode Select 107 * Called Loopback Select (LS) in 108 * later manuals. Should be set. */ 109 #define DCR_AR 0x10 /* Autoinitialize Remote */ 110 #define DCR_FTS 0x60 /* Fifo Threshold Select */ 111 #define DCR_2BYTES 0x00 /* 2 bytes */ 112 #define DCR_4BYTES 0x40 /* 4 bytes */ 113 #define DCR_8BYTES 0x20 /* 8 bytes */ 114 #define DCR_12BYTES 0x60 /* 12 bytes */ 115 116 /* Bits in dp_tcr */ 117 #define TCR_CRC 0x01 /* Inhibit CRC */ 118 #define TCR_ELC 0x06 /* Encoded Loopback Control */ 119 #define TCR_NORMAL 0x00 /* ELC: Normal Operation */ 120 #define TCR_INTERNAL 0x02 /* ELC: Internal Loopback */ 121 #define TCR_0EXTERNAL 0x04 /* ELC: External Loopback LPBK=0 */ 122 #define TCR_1EXTERNAL 0x06 /* ELC: External Loopback LPBK=1 */ 123 #define TCR_ATD 0x08 /* Auto Transmit Disable */ 124 #define TCR_OFST 0x10 /* Collision Offset Enable (be nice) */ 125 126 /* Bits in dp_tsr */ 127 #define TSR_PTX 0x01 /* Packet Transmitted (without error)*/ 128 #define TSR_DFR 0x02 /* Transmit Deferred, reserved in 129 * later manuals. */ 130 #define TSR_COL 0x04 /* Transmit Collided */ 131 #define TSR_ABT 0x08 /* Transmit Aborted */ 132 #define TSR_CRS 0x10 /* Carrier Sense Lost */ 133 #define TSR_FU 0x20 /* FIFO Underrun */ 134 #define TSR_CDH 0x40 /* CD Heartbeat */ 135 #define TSR_OWC 0x80 /* Out of Window Collision */ 136 137 /* Bits in tp_rcr */ 138 #define RCR_SEP 0x01 /* Save Errored Packets */ 139 #define RCR_AR 0x02 /* Accept Runt Packets */ 140 #define RCR_AB 0x04 /* Accept Broadcast */ 141 #define RCR_AM 0x08 /* Accept Multicast */ 142 #define RCR_PRO 0x10 /* Physical Promiscuous */ 143 #define RCR_MON 0x20 /* Monitor Mode */ 144 145 /* Bits in dp_rsr */ 146 #define RSR_PRX 0x01 /* Packet Received Intact */ 147 #define RSR_CRC 0x02 /* CRC Error */ 148 #define RSR_FAE 0x04 /* Frame Alignment Error */ 149 #define RSR_FO 0x08 /* FIFO Overrun */ 150 #define RSR_MPA 0x10 /* Missed Packet */ 151 #define RSR_PHY 0x20 /* Multicast Address Match */ 152 #define RSR_DIS 0x40 /* Receiver Disabled */ 153 #define RSR_DFR 0x80 /* In later manuals: Deferring */ 154 155 typedef struct dp_rcvhdr 156 { 157 u8_t dr_status; /* Copy of rsr */ 158 u8_t dr_next; /* Pointer to next packet */ 159 u8_t dr_rbcl; /* Receive Byte Count Low */ 160 u8_t dr_rbch; /* Receive Byte Count High */ 161 } dp_rcvhdr_t; 162 163 #define DP_PAGESIZE 256 164 165 /* Some macros to simplify accessing the dp8390 */ 166 #define inb_reg0(dep, reg) (inb(dep->de_dp8390_port+reg)) 167 #define outb_reg0(dep, reg, data) (outb(dep->de_dp8390_port+reg, data)) 168 #define inb_reg1(dep, reg) (inb(dep->de_dp8390_port+reg)) 169 #define outb_reg1(dep, reg, data) (outb(dep->de_dp8390_port+reg, data)) 170 171 /* Software interface to the dp8390 driver */ 172 173 struct dpeth; 174 struct iovec_dat; 175 struct iovec_dat_s; 176 typedef void (*dp_initf_t)(struct dpeth *dep); 177 typedef void (*dp_stopf_t)(struct dpeth *dep); 178 typedef void (*dp_user2nicf_s_t)(struct dpeth *dep, 179 struct netdriver_data *data, int nic_addr, size_t offset, 180 size_t count); 181 typedef void (*dp_nic2userf_s_t)(struct dpeth *dep, 182 struct netdriver_data *data, int nic_addr, size_t offset, 183 size_t count); 184 typedef void (*dp_getblock_t)(struct dpeth *dep, int page, size_t 185 offset, size_t size, void *dst); 186 187 typedef int irq_hook_t; 188 189 #define SENDQ_NR 2 /* Maximum size of the send queue */ 190 #define SENDQ_PAGES 6 /* 6 * DP_PAGESIZE >= 1514 bytes */ 191 192 typedef struct dpeth 193 { 194 /* The de_base_port field is the starting point of the probe. 195 * The conf routine also fills de_linmem and de_irq. If the probe 196 * routine knows the irq and/or memory address because they are 197 * hardwired in the board, the probe should modify these fields. 198 * Futhermore, the probe routine should also fill in de_initf and 199 * de_stopf fields with the appropriate function pointers and set 200 * de_prog_IO iff programmed I/O is to be used. 201 */ 202 port_t de_base_port; 203 phys_bytes de_linmem; 204 char *de_locmem; 205 int de_irq; 206 int de_int_pending; 207 irq_hook_t de_hook; 208 dp_initf_t de_initf; 209 dp_stopf_t de_stopf; 210 int de_prog_IO; 211 char de_name[sizeof("dp8390#n")]; 212 213 /* The initf function fills the following fields. Only cards that do 214 * programmed I/O fill in the de_pata_port field. 215 * In addition, the init routine has to fill in the sendq data 216 * structures. 217 */ 218 ether_addr_t de_address; 219 port_t de_dp8390_port; 220 port_t de_data_port; 221 int de_16bit; 222 int de_ramsize; 223 int de_offset_page; 224 int de_startpage; 225 int de_stoppage; 226 227 /* PCI config */ 228 char de_pci; /* TRUE iff PCI device */ 229 230 /* Do it yourself send queue */ 231 struct sendq 232 { 233 int sq_filled; /* this buffer contains a packet */ 234 int sq_size; /* with this size */ 235 int sq_sendpage; /* starting page of the buffer */ 236 } de_sendq[SENDQ_NR]; 237 int de_sendq_nr; 238 int de_sendq_head; /* Enqueue at the head */ 239 int de_sendq_tail; /* Dequeue at the tail */ 240 241 /* Fields for internal use by the dp8390 driver. */ 242 int de_flags; 243 eth_stat_t de_stat; 244 dp_user2nicf_s_t de_user2nicf_s; 245 dp_nic2userf_s_t de_nic2userf_s; 246 dp_getblock_t de_getblockf; 247 } dpeth_t; 248 249 #define DEI_DEFAULT 0x8000 250 251 #define DEF_EMPTY 0x00 252 #define DEF_STOPPED 0x01 253 254 #define debug 0 255 256 /* 257 * $PchId: dp8390.h,v 1.10 2005/02/10 17:26:06 philip Exp $ 258 */ 259