1 #ifndef _LINUX_VIRTIO_NET_H
2 #define _LINUX_VIRTIO_NET_H
3 /* This header is BSD licensed so anyone can use the definitions to implement
4  * compatible drivers/servers.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. Neither the name of IBM nor the names of its contributors
15  *    may be used to endorse or promote products derived from this software
16  *    without specific prior written permission.
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
21  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE. */
28 #if 0
29 #include <linux/types.h>
30 #include <linux/virtio_ids.h>
31 #include <linux/virtio_config.h>
32 #include <linux/if_ether.h>
33 #endif
34 
35 /* The feature bitmap for virtio net */
36 #define VIRTIO_NET_F_CSUM	0	/* Host handles pkts w/ partial csum */
37 #define VIRTIO_NET_F_GUEST_CSUM	1	/* Guest handles pkts w/ partial csum */
38 #define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
39 #define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
40 #define VIRTIO_NET_F_GUEST_TSO4	7	/* Guest can handle TSOv4 in. */
41 #define VIRTIO_NET_F_GUEST_TSO6	8	/* Guest can handle TSOv6 in. */
42 #define VIRTIO_NET_F_GUEST_ECN	9	/* Guest can handle TSO[6] w/ ECN in. */
43 #define VIRTIO_NET_F_GUEST_UFO	10	/* Guest can handle UFO in. */
44 #define VIRTIO_NET_F_HOST_TSO4	11	/* Host can handle TSOv4 in. */
45 #define VIRTIO_NET_F_HOST_TSO6	12	/* Host can handle TSOv6 in. */
46 #define VIRTIO_NET_F_HOST_ECN	13	/* Host can handle TSO[6] w/ ECN in. */
47 #define VIRTIO_NET_F_HOST_UFO	14	/* Host can handle UFO in. */
48 #define VIRTIO_NET_F_MRG_RXBUF	15	/* Host can merge receive buffers. */
49 #define VIRTIO_NET_F_STATUS	16	/* virtio_net_config.status available */
50 #define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
51 #define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
52 #define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
53 #define VIRTIO_NET_F_CTRL_RX_EXTRA 20	/* Extra RX mode control support */
54 #define VIRTIO_NET_F_GUEST_ANNOUNCE 21	/* Guest can announce device on the
55 					 * network */
56 
57 #define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
58 #define VIRTIO_NET_S_ANNOUNCE	2	/* Announcement is needed */
59 
60 struct virtio_net_config {
61 	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
62 	u8_t mac[6];
63 	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
64 	u16_t status;
65 } __attribute__((packed));
66 
67 /* This is the first element of the scatter-gather list.  If you don't
68  * specify GSO or CSUM features, you can simply ignore the header. */
69 struct virtio_net_hdr {
70 #define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	// Use csum_start, csum_offset
71 #define VIRTIO_NET_HDR_F_DATA_VALID	2	// Csum is valid
72 	u8_t flags;
73 #define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
74 #define VIRTIO_NET_HDR_GSO_TCPV4	1	// GSO frame, IPv4 TCP (TSO)
75 #define VIRTIO_NET_HDR_GSO_UDP		3	// GSO frame, IPv4 UDP (UFO)
76 #define VIRTIO_NET_HDR_GSO_TCPV6	4	// GSO frame, IPv6 TCP
77 #define VIRTIO_NET_HDR_GSO_ECN		0x80	// TCP has ECN set
78 	u8_t gso_type;
79 	u16_t hdr_len;		/* Ethernet + IP + tcp/udp hdrs */
80 	u16_t gso_size;		/* Bytes to append to hdr_len per frame */
81 	u16_t csum_start;	/* Position to start checksumming from */
82 	u16_t csum_offset;	/* Offset after that to place checksum */
83 };
84 
85 /* This is the version of the header to use when the MRG_RXBUF
86  * feature has been negotiated. */
87 struct virtio_net_hdr_mrg_rxbuf {
88 	struct virtio_net_hdr hdr;
89 	u16_t num_buffers;	/* Number of merged rx buffers */
90 };
91 
92 /*
93  * Control virtqueue data structures
94  *
95  * The control virtqueue expects a header in the first sg entry
96  * and an ack/status response in the last entry.  Data for the
97  * command goes in between.
98  */
99 struct virtio_net_ctrl_hdr {
100 	u8_t class;
101 	u8_t cmd;
102 } __attribute__((packed));
103 
104 typedef u8_t virtio_net_ctrl_ack;
105 
106 #define VIRTIO_NET_OK     0
107 #define VIRTIO_NET_ERR    1
108 
109 /*
110  * Control the RX mode, ie. promisucous, allmulti, etc...
111  * All commands require an "out" sg entry containing a 1 byte
112  * state value, zero = disable, non-zero = enable.  Commands
113  * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
114  * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
115  */
116 #define VIRTIO_NET_CTRL_RX    0
117  #define VIRTIO_NET_CTRL_RX_PROMISC      0
118  #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
119  #define VIRTIO_NET_CTRL_RX_ALLUNI       2
120  #define VIRTIO_NET_CTRL_RX_NOMULTI      3
121  #define VIRTIO_NET_CTRL_RX_NOUNI        4
122  #define VIRTIO_NET_CTRL_RX_NOBCAST      5
123 
124 /*
125  * Control the MAC filter table.
126  *
127  * The MAC filter table is managed by the hypervisor, the guest should
128  * assume the size is infinite.  Filtering should be considered
129  * non-perfect, ie. based on hypervisor resources, the guest may
130  * received packets from sources not specified in the filter list.
131  *
132  * In addition to the class/cmd header, the TABLE_SET command requires
133  * two out scatterlists.  Each contains a 4 byte count of entries followed
134  * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
135  * first sg list contains unicast addresses, the second is for multicast.
136  * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
137  * is available.
138  */
139 struct virtio_net_ctrl_mac {
140 	u32_t entries;
141 #define ETH_ALEN 6
142 	u8_t macs[][ETH_ALEN];
143 } __attribute__((packed));
144 
145 #define VIRTIO_NET_CTRL_MAC    1
146  #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
147 
148 /*
149  * Control VLAN filtering
150  *
151  * The VLAN filter table is controlled via a simple ADD/DEL interface.
152  * VLAN IDs not added may be filterd by the hypervisor.  Del is the
153  * opposite of add.  Both commands expect an out entry containing a 2
154  * byte VLAN ID.  VLAN filterting is available with the
155  * VIRTIO_NET_F_CTRL_VLAN feature bit.
156  */
157 #define VIRTIO_NET_CTRL_VLAN       2
158  #define VIRTIO_NET_CTRL_VLAN_ADD             0
159  #define VIRTIO_NET_CTRL_VLAN_DEL             1
160 
161 /*
162  * Control link announce acknowledgement
163  *
164  * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
165  * driver has recevied the notification; device would clear the
166  * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
167  * this command.
168  */
169 #define VIRTIO_NET_CTRL_ANNOUNCE       3
170  #define VIRTIO_NET_CTRL_ANNOUNCE_ACK         0
171 
172 #endif /* _LINUX_VIRTIO_NET_H */
173