xref: /minix/minix/man/man5/keymap.5 (revision 7f5f010b)
KEYMAP 5
NAME
keymap - keyboard maps
SYNOPSIS
/etc/keymap
DESCRIPTION
/etc/keymap is the compressed mapping from keyboard scan codes to ASCII. It is made from a keymap source file consisting of MAP_COLS columns (MINIX assigns the value 6 to MAX_COLS, corresponding to key pressed, key+SHIFT, key+LEFT_ALT, key+RIGHT_ALT, key+ALT+SHIFT and key+CTRL) and NR_SCAN_CODES rows (MINIX assigns the value 0xE8 to NR_SCAN_CODES, corresponding to the range of defined USB HID key codes, which is the set of key codes that is to be provided by all keyboard drivers), and each element is 2 bytes in length (see u16_t in type definitions). The low order byte corresponds to the character represented by the scan code, and the high order byte corresponds to the special meaning (when CAPS LOCK has effect, if it is a function key, etc.), which is converted to binary keymap format using the genmap utility.

"Types (general): <sys/types.h>"
<sys/types.h> defines the u8_t and u16_t types, corresponding to 8 and 16 bit values.
"Keys: <minix/input.h>"
This header file contains the list of keys, prefixed by a INPUT_KEY_ prefix. The K macro (see below) automatically adds the INPUT_KEY_ prefix to the given key name. Input types from pages other than the key page are not supported by TTY.
"Macros: <minix/keymap.h>"

"K(" k ") - Key" Maps to the entry for the key in the bitmap

"C(" c ") - Control" Maps to control code

"A(" c ") - Alt" Sets the eight bit

"CA(" c ") - Control-Alt" Short for "A(C(" c "))"

"L(" c ") - Caps Lock" Adds Caps Lock effect

These macros are used in a keymap source file to help define keys. So instead of writing 032 to put a CTRL-Z in the map you write "C('Z')" . The "L(" c ")" macro is used in column 0 to tell that the Caps Lock key is active for this key. (Caps Lock should only have effect on letters.) Similarly, some keys in column 0 have a N prefix to indicate that they are affected by the Num Lock key.

"Definitions: <minix/keymap.h>"
<minix/keymap.h> contains a large number of definitions for special keys, like function keys, and keys on the numeric keypad. They are:

Modifier keys: LCTRL , RCTRL , LSHIFT , RSHIFT , LALT , RALT .

Special keys: HOME , END , UP , DOWN , LEFT , RIGHT , PGUP , PGDN , MID " (numeric '5')," MIN " (only with " A " or " C " prefix)," PLUS , INSRT , DEL .

Special keys affected by Num Lock: NHOME , NEND ", ..." NINSRT , NDEL .

ALT + numpad key: AHOME , AEND ", ...," AINSRT .

CTRL + numpad: CHOME , CEND ", ...," CINSRT .

Lock keys: CALOCK " (Caps Lock)," NLOCK " (Num Lock)," SLOCK " (Scroll Lock)."

Function keys: F1 ", ...," F12 .

ALT - function key: AF1 ", ...," AF12 .

CTRL - function key: CF1 ", ...," CF12 .

SHIFT - function key: SF1 ", ...," SF12 .

ALT - SHIFT - function key: ASF1 ", ...," ASF12 .

"Creating/changing keyboard mapping"
You can create your own keyboard mapping by copying one of the existing keymap source files (Standard Minix: drivers/tty/keymaps/*.src ) and modifying the desired keys. Once this has been done, you need to recompile the genmap.c file, either by adding a new entry to the Makefile, or by running the following commands:

cc -DKEYSRC=\e"keymap.src\e" genmap.c

After this, the keymap file can be generated by running:

"a.out > " keymap .map

The keymap can be loaded in the keyboard driver by:

"loadkeys " keymap .map

It is wise to first run loadkeys on one of the maps in /usr/lib/keymaps so that you can easily revert back to a known keymap with a few taps on the up-arrow key and pressing return. You will otherwise have to fix the keymap with a faulty keymap loaded into the keyboard driver, which is no fun.

When the keymap is to your satisfaction you can copy it to /etc/keymap to have it loaded automatically at reboot.

FILES

15 /etc/keymap Default keymap file

"SEE ALSO"
loadkeys (1).
AUTHOR
Victor A. Rodriguez - El bit Fantasma (Bit-Man@Tasa.Com.AR)