1 /* tc-sh64.c -- Assemble code for the SuperH SH SHcompact and SHmedia. 2 Copyright 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation. 3 4 This file is part of GAS, the GNU Assembler. 5 6 GAS is free software; you can redistribute it and/or modify 7 it under the terms of the GNU General Public License as published by 8 the Free Software Foundation; either version 2, or (at your option) 9 any later version. 10 11 GAS is distributed in the hope that it will be useful, 12 but WITHOUT ANY WARRANTY; without even the implied warranty of 13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 GNU General Public License for more details. 15 16 You should have received a copy of the GNU General Public License 17 along with GAS; see the file COPYING. If not, write to 18 the Free Software Foundation, 51 Franklin Street - Fifth Floor, 19 Boston, MA 02110-1301, USA. */ 20 21 /* This file defines SHmedia ISA-specific functions and includes tc-sh.c. 22 The SHcompact ISA is in all useful aspects the "old" sh4 as implemented 23 in tc-sh.c. Not making this file part of tc-sh.c makes it easier to 24 keep a leaner sh[1-4]-only implementation. */ 25 26 #define HAVE_SH64 27 28 #include <stdio.h> 29 #include "as.h" 30 #include "safe-ctype.h" 31 #include "opcodes/sh64-opc.h" 32 33 #ifndef OBJ_ELF 34 #error This file assumes object output is in the ELF format 35 #endif 36 37 /* Suffix used when we make "datalabel" symbol copies. It must not 38 collide with anything that can normally appear in a symbol, "faked 39 symbol" or local symbol. */ 40 #define DATALABEL_SUFFIX " DL" 41 42 /* See shmedia_md_apply_fix and shmedia_md_pcrel_from_section for usage. */ 43 #define SHMEDIA_MD_PCREL_FROM_FIX(FIXP) \ 44 ((FIXP)->fx_size + (FIXP)->fx_where + (FIXP)->fx_frag->fr_address - 4) 45 46 /* We use this internally to see which one is PT and which is a PTA/PTB 47 that should be error-checked. We give it a better name here (but not 48 one that looks official). Adding it to reloc.c would make it look too 49 much of a real reloc; it is just used temporarily as a fixup-type. */ 50 #define SHMEDIA_BFD_RELOC_PT BFD_RELOC_12_PCREL 51 52 typedef struct 53 { 54 shmedia_arg_type type; 55 56 /* These could go into a union, but that would uglify the code. */ 57 int reg; 58 expressionS immediate; 59 60 /* If IMMEDIATE was a shift-expression, like "(S >> N) & 65535", where 61 N = 0, 16, 32, 48, used to extract a certain 16-bit-field to make up 62 a MOVI or SHORI relocation for a symbol, then we put the 63 corresponding reloc-type here and modify the "immediate" expression 64 to S. Otherwise, this is just BFD_RELOC_NONE. */ 65 bfd_reloc_code_real_type reloctype; 66 } shmedia_operand_info; 67 68 /* Frag containing last base instruction. This is put in the TC field in 69 a frag, so we can emit fixups for fr_opcode without needing to make 70 sure that the opcode is in the same frag as any variant operand. */ 71 fragS *sh64_last_insn_frag = NULL; 72 73 typedef struct 74 { 75 shmedia_operand_info operands[3]; 76 unsigned long ops_val; 77 } shmedia_operands_info; 78 79 enum sh64_abi_values 80 { sh64_abi_unspecified, sh64_abi_32, sh64_abi_64 }; 81 82 /* What ISA are we assembling code for? */ 83 enum sh64_isa_values sh64_isa_mode = sh64_isa_unspecified; 84 85 /* What ABI was specified, if any (implicitly or explicitly)? */ 86 static enum sh64_abi_values sh64_abi = sh64_abi_unspecified; 87 88 /* A note that says if we're in a sequence of insns without label 89 settings, segment or ISA mode changes or emitted data. */ 90 static bfd_boolean seen_insn = FALSE; 91 92 /* This is set to TRUE in shmedia_md_end, so that we don't emit any 93 .cranges entries when the assembler calls output functions while 94 grinding along after all input is seen. */ 95 static bfd_boolean sh64_end_of_assembly = FALSE; 96 97 /* Controlled by the option -no-mix, this invalidates mixing SHcompact and 98 SHmedia code in the same section, and also invalidates mixing data and 99 SHmedia code in the same section. No .cranges will therefore be 100 emitted, unless -shcompact-const-crange is specified and there is a 101 constant pool in SHcompact code. */ 102 static bfd_boolean sh64_mix = TRUE; 103 104 static bfd_boolean sh64_shcompact_const_crange = FALSE; 105 106 /* Controlled by the option -no-expand, this says whether or not we expand 107 MOVI and PT/PTA/PTB. When we do not expand these insns to fit an 108 operand, we will emit errors for operands out of range and generate the 109 basic instruction and reloc for an external symbol. */ 110 static bfd_boolean sh64_expand = TRUE; 111 112 /* Controlled by the option -expand-pt32, this says whether we expand 113 PT/PTA/PTB of an external symbol to (only) 32 or (the full) 64 bits 114 when -abi=64 is in effect. */ 115 static bfd_boolean sh64_pt32 = FALSE; 116 117 /* When emitting a .cranges descriptor, we want to avoid getting recursive 118 calls through emit_expr. */ 119 static bfd_boolean emitting_crange = FALSE; 120 121 /* SHmedia mnemonics. */ 122 static struct hash_control *shmedia_opcode_hash_control = NULL; 123 124 static const unsigned char shmedia_big_nop_pattern[4] = 125 { 126 (SHMEDIA_NOP_OPC >> 24) & 255, (SHMEDIA_NOP_OPC >> 16) & 255, 127 (SHMEDIA_NOP_OPC >> 8) & 255, SHMEDIA_NOP_OPC & 255 128 }; 129 130 static const unsigned char shmedia_little_nop_pattern[4] = 131 { 132 SHMEDIA_NOP_OPC & 255, (SHMEDIA_NOP_OPC >> 8) & 255, 133 (SHMEDIA_NOP_OPC >> 16) & 255, (SHMEDIA_NOP_OPC >> 24) & 255 134 }; 135 136 static void shmedia_md_begin (void); 137 static int shmedia_parse_reg (char *, int *, int *, shmedia_arg_type); 138 static void shmedia_md_assemble (char *); 139 static void shmedia_md_apply_fix (fixS *, valueT *); 140 static int shmedia_md_estimate_size_before_relax (fragS *, segT); 141 static int shmedia_init_reloc (arelent *, fixS *); 142 static char *shmedia_get_operands (shmedia_opcode_info *, char *, 143 shmedia_operands_info *); 144 static void s_sh64_mode (int); 145 static void s_sh64_abi (int); 146 static void shmedia_md_convert_frag (bfd *, segT, fragS *, bfd_boolean); 147 static void shmedia_check_limits (offsetT *, bfd_reloc_code_real_type, 148 fixS *); 149 static void sh64_set_contents_type (enum sh64_elf_cr_type); 150 static void shmedia_get_operand (char **, shmedia_operand_info *, 151 shmedia_arg_type); 152 static unsigned long shmedia_immediate_op (char *, shmedia_operand_info *, 153 int, bfd_reloc_code_real_type); 154 static char *shmedia_parse_exp (char *, shmedia_operand_info *); 155 static void shmedia_frob_file_before_adjust (void); 156 static void sh64_emit_crange (symbolS *, symbolS *, enum sh64_elf_cr_type); 157 static void sh64_flush_last_crange (bfd *, asection *, void *); 158 static void sh64_flag_output (void); 159 static void sh64_update_contents_mark (bfd_boolean); 160 static void sh64_vtable_entry (int); 161 static void sh64_vtable_inherit (int); 162 static char *strip_datalabels (void); 163 static int shmedia_build_Mytes (shmedia_opcode_info *, 164 shmedia_operands_info *); 165 static shmedia_opcode_info *shmedia_find_cooked_opcode (char **); 166 static unsigned long shmedia_mask_number (unsigned long, 167 bfd_reloc_code_real_type); 168 169 #include "tc-sh.c" 170 171 void 172 shmedia_md_end (void) 173 { 174 symbolS *symp; 175 176 /* First, update the last range to include whatever data was last 177 emitted. */ 178 sh64_update_contents_mark (TRUE); 179 180 /* Make sure frags generated after this point are not marked with the 181 wrong ISA; make them easily spottable. We still want to distinguish 182 it from sh64_isa_unspecified when we compile for SHcompact or 183 SHmedia. */ 184 if (sh64_isa_mode != sh64_isa_unspecified) 185 sh64_isa_mode = sh64_isa_sh5_guard; 186 187 sh64_end_of_assembly = TRUE; 188 189 bfd_map_over_sections (stdoutput, sh64_flush_last_crange, NULL); 190 191 /* Iterate over segments and emit the last .cranges descriptor. */ 192 for (symp = symbol_rootP; symp != NULL; symp = symp->sy_next) 193 { 194 symbolS *mainsym = *symbol_get_tc (symp); 195 196 /* Is this a datalabel symbol; does it have a pointer to the main 197 symbol? */ 198 if (mainsym != NULL) 199 { 200 /* If the datalabel symbol is undefined, check if the main 201 symbol has changed in that respect. */ 202 if (S_GET_SEGMENT (symp) == undefined_section) 203 { 204 segT symseg; 205 206 symseg = S_GET_SEGMENT (mainsym); 207 208 /* If the symbol is now defined to something that is not 209 global and without STO_SH5_ISA32, we just equate the 210 datalabel symbol to the main symbol, and the lack of 211 STO_SH5_ISA32 will handle the datalabelness. */ 212 if (symseg != undefined_section) 213 { 214 if (S_GET_OTHER (mainsym) != STO_SH5_ISA32) 215 { 216 symp->sy_value.X_op = O_symbol; 217 symp->sy_value.X_add_symbol = mainsym; 218 symp->sy_value.X_op_symbol = NULL; 219 symp->sy_value.X_add_number = 0; 220 S_SET_SEGMENT (symp, S_GET_SEGMENT (mainsym)); 221 symbol_set_frag (symp, &zero_address_frag); 222 copy_symbol_attributes (symp, mainsym); 223 } 224 else 225 { 226 /* An undefined symbol has since we saw it at 227 "datalabel", been defined to a BranchTarget 228 symbol. What we need to do here is very similar 229 to when we find the "datalabel" for a defined 230 symbol. FIXME: Break out to common function. */ 231 symbol_set_value_expression (symp, 232 symbol_get_value_expression 233 (mainsym)); 234 S_SET_SEGMENT (symp, symseg); 235 symbol_set_frag (symp, symbol_get_frag (mainsym)); 236 copy_symbol_attributes (symp, mainsym); 237 238 /* Unset the BranchTarget mark that can be set at 239 attribute-copying. */ 240 S_SET_OTHER (symp, 241 S_GET_OTHER (symp) & ~STO_SH5_ISA32); 242 243 /* The GLOBAL and WEAK attributes are not copied 244 over by copy_symbol_attributes. Do it here. */ 245 if (S_IS_WEAK (mainsym)) 246 S_SET_WEAK (symp); 247 else if (S_IS_EXTERNAL (mainsym)) 248 S_SET_EXTERNAL (symp); 249 } 250 } 251 else 252 { 253 /* A symbol that was defined at the time we saw 254 "datalabel" can since have been attributed with being 255 weak or global. */ 256 if (S_IS_WEAK (mainsym)) 257 S_SET_WEAK (symp); 258 else if (S_IS_EXTERNAL (mainsym)) 259 S_SET_EXTERNAL (symp); 260 } 261 } 262 } 263 } 264 265 for (symp = symbol_rootP; symp != NULL; symp = symp->sy_next) 266 if (S_GET_OTHER (symp) & STO_SH5_ISA32) 267 symp->sy_value.X_add_number++; 268 } 269 270 /* When resolving symbols, the main assembler has done us a misfavour. It 271 has removed the equation to the main symbol for a datalabel reference 272 that should be equal to the main symbol, e.g. when it's a global or 273 weak symbol and is a non-BranchTarget symbol anyway. We change that 274 back, so that relocs are against the main symbol, not the local "section 275 + offset" value. */ 276 277 static void 278 shmedia_frob_file_before_adjust (void) 279 { 280 symbolS *symp; 281 for (symp = symbol_rootP; symp != NULL; symp = symp->sy_next) 282 { 283 symbolS *mainsym = *symbol_get_tc (symp); 284 285 if (mainsym != NULL 286 && S_GET_OTHER (mainsym) != STO_SH5_ISA32 287 && (S_IS_EXTERNAL (mainsym) || S_IS_WEAK (mainsym))) 288 { 289 symp->sy_value.X_op = O_symbol; 290 symp->sy_value.X_add_symbol = mainsym; 291 symp->sy_value.X_op_symbol = NULL; 292 symp->sy_value.X_add_number = 0; 293 294 /* For the "equation trick" to work, we have to set the section 295 to undefined. */ 296 S_SET_SEGMENT (symp, undefined_section); 297 symbol_set_frag (symp, &zero_address_frag); 298 copy_symbol_attributes (symp, mainsym); 299 300 /* Don't forget to remove the STO_SH5_ISA32 attribute after 301 copying the other attributes. */ 302 S_SET_OTHER (symp, S_GET_OTHER (symp) & ~STO_SH5_ISA32); 303 } 304 } 305 } 306 307 /* We need to mark the current location after the alignment. This is 308 copied code the caller, do_align. We mark the frag location before and 309 after as we need and arrange to skip the same code in do_align. 310 311 An alternative to code duplication is to call the do_align recursively, 312 arranging to fall through into do_align if we're already here. That 313 would require do_align as an incoming function parameter, since it's 314 static in read.c. That solution was discarded a too kludgy. */ 315 316 void 317 sh64_do_align (int n, const char *fill, int len, int max) 318 { 319 /* Update region, or put a data region in front. */ 320 sh64_update_contents_mark (TRUE); 321 322 /* Only make a frag if we HAVE to... */ 323 if (n != 0 && !need_pass_2) 324 { 325 if (fill == NULL) 326 { 327 if (subseg_text_p (now_seg)) 328 frag_align_code (n, max); 329 else 330 frag_align (n, 0, max); 331 } 332 else if (len <= 1) 333 frag_align (n, *fill, max); 334 else 335 frag_align_pattern (n, fill, len, max); 336 } 337 338 /* Update mark for current region with current type. */ 339 sh64_update_contents_mark (FALSE); 340 } 341 342 /* The MAX_MEM_FOR_RS_ALIGN_CODE worker. We have to find out the ISA of 343 the current segment at this position. We can't look just at 344 sh64_isa_shmedia, and we can't look at frag_now. This is brittle: 345 callers are currently frag_align_code from subsegs_finish in write.c 346 (end of assembly) and frag_align_code from do_align in read.c (during 347 assembly). */ 348 349 int 350 sh64_max_mem_for_rs_align_code (void) 351 { 352 segment_info_type *seginfo; 353 fragS *mode_start_frag; 354 seginfo = seg_info (now_seg); 355 356 /* We don't use the contents type we find at the tc_segment_info_data, 357 since that does not give us absolute information about the ISA; the 358 contents type can presumably be CRT_DATA and we'd be none the wiser. 359 Instead we use the information stored at the frag of the symbol at 360 the start of this range. If any information is missing or NULL, 361 assume SHcompact. */ 362 return 363 /* If the current ISA mode is SHmedia, that's the mode that we're 364 going to assign to the new frag, so request enough memory for 365 it, even if we switch modes afterwards, otherwise we may 366 allocate too little memory and end up overflowing our buffer. */ 367 (sh64_isa_mode == sh64_isa_shmedia 368 || (sh64_isa_mode != sh64_isa_unspecified 369 && seginfo != NULL 370 && seginfo->tc_segment_info_data.mode_start_symbol != NULL 371 && ((mode_start_frag 372 = (symbol_get_frag 373 (seginfo->tc_segment_info_data.mode_start_symbol))) 374 != NULL) 375 && mode_start_frag->tc_frag_data.isa == sh64_isa_shmedia)) 376 ? (3 + 4) : (2 + 1); 377 } 378 379 /* Put in SHmedia NOP:s if the alignment was created when in SHmedia mode. */ 380 381 void 382 sh64_handle_align (fragS * frag) 383 { 384 int bytes = frag->fr_next->fr_address - frag->fr_address - frag->fr_fix; 385 char * p = frag->fr_literal + frag->fr_fix; 386 387 if (frag->tc_frag_data.isa == sh64_isa_shmedia 388 && frag->fr_type == rs_align_code) 389 { 390 while (bytes & 3) 391 { 392 *p++ = 0; 393 bytes--; 394 frag->fr_fix += 1; 395 } 396 397 if (target_big_endian) 398 { 399 memcpy (p, shmedia_big_nop_pattern, 400 sizeof shmedia_big_nop_pattern); 401 frag->fr_var = sizeof shmedia_big_nop_pattern; 402 } 403 else 404 { 405 memcpy (p, shmedia_little_nop_pattern, 406 sizeof shmedia_little_nop_pattern); 407 frag->fr_var = sizeof shmedia_little_nop_pattern; 408 } 409 } 410 else 411 /* Punt to SHcompact function. */ 412 sh_handle_align (frag); 413 } 414 415 /* Set SEC_SH64_ISA32 for SHmedia sections. */ 416 417 void 418 shmedia_frob_section_type (asection *sec) 419 { 420 segment_info_type *seginfo; 421 seginfo = seg_info (sec); 422 423 /* This and elf32-sh64.c:sh64_elf_fake_sections are the only places 424 where we use anything else than ELF header flags to communicate the 425 section as containing SHmedia or other contents. BFD SEC_* section 426 flags are running out and should not be overloaded with 427 target-specific semantics. This target is ELF only (semantics not 428 defined for other formats), so we use the target-specific pointer 429 field of the ELF section data. */ 430 if (seginfo && sh64_abi == sh64_abi_32) 431 { 432 struct sh64_section_data *sec_elf_data; 433 flagword sec_type = 0; 434 435 if (seginfo->tc_segment_info_data.emitted_ranges != 0) 436 sec_type = SHF_SH5_ISA32_MIXED; 437 else if (seginfo->tc_segment_info_data.contents_type == CRT_SH5_ISA32) 438 sec_type = SHF_SH5_ISA32; 439 440 sec_elf_data = sh64_elf_section_data (sec)->sh64_info; 441 if (sec_elf_data == NULL) 442 { 443 sec_elf_data = xcalloc (1, sizeof (*sec_elf_data)); 444 sh64_elf_section_data (sec)->sh64_info = sec_elf_data; 445 } 446 447 sec_elf_data->contents_flags = sec_type; 448 } 449 } 450 451 /* This function is called by write_object_file right before the symbol 452 table is written. We subtract 1 from all symbols marked STO_SH5_ISA32, 453 as their values are temporarily incremented in shmedia_md_end, before 454 symbols values are used by relocs and fixups. 455 456 To increment all symbols and then decrement here is admittedly a 457 hackish solution. The alternative is to add infrastructure and hooks 458 to symbol evaluation that evaluates symbols differently internally to 459 the value output into the object file, but at the moment that just 460 seems too much for little benefit. */ 461 462 void 463 sh64_adjust_symtab (void) 464 { 465 symbolS *symp; 466 467 for (symp = symbol_rootP; symp; symp = symbol_next (symp)) 468 { 469 symbolS *main_symbol = *symbol_get_tc (symp); 470 471 if (main_symbol) 472 { 473 char *sym_name = (char *) S_GET_NAME (symp); 474 475 /* All datalabels not used in relocs should be gone by now. 476 477 We change those remaining to have the name of the main 478 symbol, and we set the ELF type of the symbol of the reloc to 479 STT_DATALABEL. */ 480 sym_name[strlen (sym_name) - strlen (DATALABEL_SUFFIX)] = 0; 481 elf_symbol (symbol_get_bfdsym (symp))->internal_elf_sym.st_info 482 = STT_DATALABEL; 483 484 /* Also set this symbol to "undefined", so we'll have only one 485 definition. */ 486 S_SET_SEGMENT (symp, undefined_section); 487 } 488 else if (S_GET_OTHER (symp) & STO_SH5_ISA32) 489 { 490 /* It's important to change the BFD symbol value, since it is now 491 set to the GAS symbolS value. */ 492 symp->bsym->value--; 493 494 /* Note that we do *not* adjust symp->sy_value.X_add_number. If 495 you do this, the test case in sh/sh64/immexpr2.s will fail. 496 This is because *after* symbols have been output but before 497 relocs are output, fixups are inspected one more time, and 498 some leftover expressions are resolved. To resolve to the 499 same values, those expressions must have the same GAS symbol 500 values before as after symbols have been output. We could 501 "symp->sy_value.X_add_number++" on the STO_SH5_ISA32 symbols 502 through tc_frob_file after symbols have been output, but that 503 would be too gross. */ 504 } 505 } 506 } 507 508 /* Fill-in an allocated arelent. */ 509 510 static int 511 shmedia_init_reloc (arelent *rel, fixS *fixP) 512 { 513 /* Adjust parts of *relp according to *fixp, and tell that it has been 514 done, so default initializations will not happen. */ 515 switch (fixP->fx_r_type) 516 { 517 case BFD_RELOC_64: 518 case BFD_RELOC_64_PCREL: 519 case BFD_RELOC_SH_IMM_LOW16: 520 case BFD_RELOC_SH_IMM_MEDLOW16: 521 case BFD_RELOC_SH_IMM_MEDHI16: 522 case BFD_RELOC_SH_IMM_HI16: 523 case BFD_RELOC_SH_IMM_LOW16_PCREL: 524 case BFD_RELOC_SH_IMM_MEDLOW16_PCREL: 525 case BFD_RELOC_SH_IMM_MEDHI16_PCREL: 526 case BFD_RELOC_SH_IMM_HI16_PCREL: 527 case BFD_RELOC_SH_IMMU5: 528 case BFD_RELOC_SH_IMMU6: 529 case BFD_RELOC_SH_IMMS6: 530 case BFD_RELOC_SH_IMMS10: 531 case BFD_RELOC_SH_IMMS10BY2: 532 case BFD_RELOC_SH_IMMS10BY4: 533 case BFD_RELOC_SH_IMMS10BY8: 534 case BFD_RELOC_SH_IMMS16: 535 case BFD_RELOC_SH_IMMU16: 536 case BFD_RELOC_SH_PT_16: 537 case BFD_RELOC_SH_GOT_LOW16: 538 case BFD_RELOC_SH_GOT_MEDLOW16: 539 case BFD_RELOC_SH_GOT_MEDHI16: 540 case BFD_RELOC_SH_GOT_HI16: 541 case BFD_RELOC_SH_GOT10BY4: 542 case BFD_RELOC_SH_GOT10BY8: 543 case BFD_RELOC_SH_GOTPLT_LOW16: 544 case BFD_RELOC_SH_GOTPLT_MEDLOW16: 545 case BFD_RELOC_SH_GOTPLT_MEDHI16: 546 case BFD_RELOC_SH_GOTPLT_HI16: 547 case BFD_RELOC_SH_GOTPLT10BY4: 548 case BFD_RELOC_SH_GOTPLT10BY8: 549 case BFD_RELOC_SH_GOTOFF_LOW16: 550 case BFD_RELOC_SH_GOTOFF_MEDLOW16: 551 case BFD_RELOC_SH_GOTOFF_MEDHI16: 552 case BFD_RELOC_SH_GOTOFF_HI16: 553 case BFD_RELOC_SH_GOTPC_LOW16: 554 case BFD_RELOC_SH_GOTPC_MEDLOW16: 555 case BFD_RELOC_SH_GOTPC_MEDHI16: 556 case BFD_RELOC_SH_GOTPC_HI16: 557 case BFD_RELOC_SH_PLT_LOW16: 558 case BFD_RELOC_SH_PLT_MEDLOW16: 559 case BFD_RELOC_SH_PLT_MEDHI16: 560 case BFD_RELOC_SH_PLT_HI16: 561 rel->addend = fixP->fx_addnumber + fixP->fx_offset; 562 return 1; 563 564 case BFD_RELOC_SH_IMMS6BY32: 565 /* This must be resolved in assembly; we do not support it as a 566 reloc in an object file. */ 567 as_bad_where (fixP->fx_file, fixP->fx_line, 568 _("This operand must be constant at assembly time")); 569 break; 570 571 /* There are valid cases where we get here for other than SHmedia 572 relocs, so don't make a BAD_CASE out of this. */ 573 default: 574 ; 575 } 576 577 return 0; 578 } 579 580 /* Hook called from md_apply_fix in tc-sh.c. */ 581 582 static void 583 shmedia_md_apply_fix (fixS *fixP, valueT *valp) 584 { 585 offsetT val = *valp; 586 char *buf = fixP->fx_where + fixP->fx_frag->fr_literal; 587 unsigned long insn 588 = target_big_endian ? bfd_getb32 (buf) : bfd_getl32 (buf); 589 bfd_reloc_code_real_type orig_fx_r_type = fixP->fx_r_type; 590 591 /* Change a 64-bit pc-relative reloc into the correct type, just like 592 tc-sh.c:md_apply_fix. */ 593 if (fixP->fx_pcrel) 594 { 595 switch (orig_fx_r_type) 596 { 597 case BFD_RELOC_64: 598 case BFD_RELOC_SH_IMM_LOW16: 599 case BFD_RELOC_SH_IMM_MEDLOW16: 600 case BFD_RELOC_SH_IMM_MEDHI16: 601 case BFD_RELOC_SH_IMM_HI16: 602 /* Because write.c calls MD_PCREL_FROM_SECTION twice, we need to 603 undo one of the adjustments, if the relocation is not 604 actually for a symbol within the same segment (which we 605 cannot check, because we're not called from md_apply_fix, so 606 we have to keep the reloc). FIXME: This is a bug in 607 write.c:fixup_segment affecting most targets that change 608 ordinary relocs to pcrel relocs in md_apply_fix. */ 609 fixP->fx_offset 610 = *valp + SHMEDIA_MD_PCREL_FROM_FIX (fixP); 611 break; 612 613 case BFD_RELOC_SH_PLT_LOW16: 614 case BFD_RELOC_SH_PLT_MEDLOW16: 615 case BFD_RELOC_SH_PLT_MEDHI16: 616 case BFD_RELOC_SH_PLT_HI16: 617 case BFD_RELOC_SH_GOTPC_LOW16: 618 case BFD_RELOC_SH_GOTPC_MEDLOW16: 619 case BFD_RELOC_SH_GOTPC_MEDHI16: 620 case BFD_RELOC_SH_GOTPC_HI16: 621 *valp = 0; 622 return; 623 624 default: 625 ; 626 } 627 628 /* We might need to change some relocs into the corresponding 629 PC-relative one. */ 630 switch (orig_fx_r_type) 631 { 632 case BFD_RELOC_64: 633 fixP->fx_r_type = BFD_RELOC_64_PCREL; 634 break; 635 636 case BFD_RELOC_SH_IMM_LOW16: 637 fixP->fx_r_type = BFD_RELOC_SH_IMM_LOW16_PCREL; 638 break; 639 640 case BFD_RELOC_SH_IMM_MEDLOW16: 641 fixP->fx_r_type = BFD_RELOC_SH_IMM_MEDLOW16_PCREL; 642 break; 643 644 case BFD_RELOC_SH_IMM_MEDHI16: 645 fixP->fx_r_type = BFD_RELOC_SH_IMM_MEDHI16_PCREL; 646 break; 647 648 case BFD_RELOC_SH_IMM_HI16: 649 fixP->fx_r_type = BFD_RELOC_SH_IMM_HI16_PCREL; 650 break; 651 652 case SHMEDIA_BFD_RELOC_PT: 653 /* This is how we see a difference between PT and PTA when not 654 expanding (in which case we handle it in 655 shmedia_md_convert_frag). Note that we don't see a 656 difference after the reloc is emitted. */ 657 fixP->fx_r_type = BFD_RELOC_SH_PT_16; 658 break; 659 660 case BFD_RELOC_SH_PT_16: 661 /* This tells us there was a PTA or PTB insn explicitly 662 expressed as such (not as PT). We "or" in a 1 into the 663 lowest bit in the (unused) destination field to tell the 664 linker that it should check the right ISA type of the 665 destination and not just change a PTA to PTB (if necessary). */ 666 md_number_to_chars (buf, insn | (1 << 10), 4); 667 break; 668 669 case BFD_RELOC_64_PCREL: 670 case BFD_RELOC_SH_IMM_LOW16_PCREL: 671 case BFD_RELOC_SH_IMM_MEDLOW16_PCREL: 672 case BFD_RELOC_SH_IMM_MEDHI16_PCREL: 673 case BFD_RELOC_SH_IMM_HI16_PCREL: 674 /* Already handled. */ 675 break; 676 677 default: 678 /* Everything else that changes into a pc-relative relocation is 679 an error. */ 680 as_bad_where (fixP->fx_file, fixP->fx_line, 681 _("Invalid operand expression")); 682 break; 683 } 684 685 return; 686 } 687 688 /* If an expression looked like it was PC-relative, but was completely 689 resolvable, we end up here with the result only in *VALP, and no 690 relocation will be emitted. */ 691 if (fixP->fx_addsy == NULL && fixP->fx_pcrel == 0) 692 { 693 /* Emit error for an out-of-range value. */ 694 shmedia_check_limits ((offsetT *) valp, fixP->fx_r_type, fixP); 695 696 switch (fixP->fx_r_type) 697 { 698 case BFD_RELOC_SH_IMM_LOW16: 699 md_number_to_chars (buf, insn | ((val & 65535) << 10), 4); 700 break; 701 702 case BFD_RELOC_SH_IMM_MEDLOW16: 703 md_number_to_chars (buf, 704 insn 705 | ((valueT) (val & ((valueT) 65535 << 16)) 706 >> (16 - 10)), 4); 707 break; 708 709 case BFD_RELOC_SH_IMM_MEDHI16: 710 md_number_to_chars (buf, 711 insn 712 | ((valueT) (val & ((valueT) 65535 << 32)) 713 >> (32 - 10)), 4); 714 break; 715 716 case BFD_RELOC_SH_IMM_HI16: 717 md_number_to_chars (buf, 718 insn 719 | ((valueT) (val & ((valueT) 65535 << 48)) 720 >> (48 - 10)), 4); 721 break; 722 723 case BFD_RELOC_SH_IMMS16: 724 case BFD_RELOC_SH_IMMU16: 725 md_number_to_chars (buf, insn | ((val & 65535) << 10), 4); 726 break; 727 728 case BFD_RELOC_SH_IMMS10: 729 md_number_to_chars (buf, insn | ((val & 0x3ff) << 10), 4); 730 break; 731 732 case BFD_RELOC_SH_IMMS10BY2: 733 md_number_to_chars (buf, 734 insn | ((val & (0x3ff << 1)) << (10 - 1)), 4); 735 break; 736 737 case BFD_RELOC_SH_IMMS10BY4: 738 md_number_to_chars (buf, 739 insn | ((val & (0x3ff << 2)) << (10 - 2)), 4); 740 break; 741 742 case BFD_RELOC_SH_IMMS10BY8: 743 md_number_to_chars (buf, 744 insn | ((val & (0x3ff << 3)) << (10 - 3)), 4); 745 break; 746 747 case BFD_RELOC_SH_SHMEDIA_CODE: 748 /* We just ignore and remove this one for the moment. FIXME: 749 Use it when implementing relaxing. */ 750 break; 751 752 case BFD_RELOC_64: 753 md_number_to_chars (buf, val, 8); 754 break; 755 756 case SHMEDIA_BFD_RELOC_PT: 757 /* Change a PT to PTB if the operand turned out to be SHcompact. 758 The basic opcode specified with PT is equivalent to PTA. */ 759 if ((val & 1) == 0) 760 insn |= SHMEDIA_PTB_BIT; 761 /* Fall through. */ 762 763 case BFD_RELOC_SH_PT_16: 764 if (! sh64_expand || sh_relax) 765 { 766 /* Check if the operand of a PTA or PTB was for the "wrong" 767 ISA. A PT had an incoming fixup of SHMEDIA_BFD_RELOC_PT, 768 which we have changed to the right type above. */ 769 if (orig_fx_r_type != SHMEDIA_BFD_RELOC_PT) 770 { 771 if ((insn & SHMEDIA_PTB_BIT) != 0 && (val & 1) != 0) 772 as_bad_where (fixP->fx_file, fixP->fx_line, 773 _("PTB operand is a SHmedia symbol")); 774 else if ((insn & SHMEDIA_PTB_BIT) == 0 && (val & 1) == 0) 775 as_bad_where (fixP->fx_file, fixP->fx_line, 776 _("PTA operand is a SHcompact symbol")); 777 } 778 779 md_number_to_chars (buf, 780 insn | ((val & (0xffff << 2)) 781 << (10 - 2)), 782 4); 783 break; 784 } 785 /* Fall through. */ 786 787 default: 788 /* This isn't a BAD_CASE, because presumably we can get here 789 from unexpected operands. Since we don't handle them, make 790 them syntax errors. */ 791 as_bad_where (fixP->fx_file, fixP->fx_line, 792 _("invalid expression in operand")); 793 } 794 fixP->fx_done = 1; 795 } 796 } 797 798 /* Hook called from md_convert_frag in tc-sh.c. */ 799 800 static void 801 shmedia_md_convert_frag (bfd *output_bfd ATTRIBUTE_UNUSED, 802 segT seg ATTRIBUTE_UNUSED, fragS *fragP, 803 bfd_boolean final) 804 { 805 /* Pointer to first byte in variable-sized part of the frag. */ 806 char *var_partp; 807 808 /* Pointer to first opcode byte in frag. */ 809 char *opcodep; 810 811 /* Pointer to frag of opcode. */ 812 fragS *opc_fragP = fragP->tc_frag_data.opc_frag; 813 814 /* Size in bytes of variable-sized part of frag. */ 815 int var_part_size = 0; 816 817 /* This is part of *fragP. It contains all information about addresses 818 and offsets to varying parts. */ 819 symbolS *symbolP = fragP->fr_symbol; 820 821 bfd_boolean reloc_needed 822 = (! final 823 || sh_relax 824 || symbolP == NULL 825 || ! S_IS_DEFINED (symbolP) 826 || S_IS_EXTERNAL (symbolP) 827 || S_IS_WEAK (symbolP) 828 || (S_GET_SEGMENT (fragP->fr_symbol) != absolute_section 829 && S_GET_SEGMENT (fragP->fr_symbol) != seg)); 830 831 bfd_reloc_code_real_type reloctype = BFD_RELOC_NONE; 832 833 unsigned long var_part_offset; 834 835 /* Where, in file space, does addr point? */ 836 bfd_vma target_address; 837 bfd_vma opcode_address; 838 839 /* What was the insn? */ 840 unsigned long insn; 841 know (fragP->fr_type == rs_machine_dependent); 842 843 var_part_offset = fragP->fr_fix; 844 var_partp = fragP->fr_literal + var_part_offset; 845 opcodep = fragP->fr_opcode; 846 847 insn = target_big_endian ? bfd_getb32 (opcodep) : bfd_getl32 (opcodep); 848 849 target_address 850 = ((symbolP && final && ! sh_relax ? S_GET_VALUE (symbolP) : 0) 851 + fragP->fr_offset); 852 853 /* The opcode that would be extended is the last four "fixed" bytes. */ 854 opcode_address = fragP->fr_address + fragP->fr_fix - 4; 855 856 switch (fragP->fr_subtype) 857 { 858 case C (SH64PCREL16PT_64, SH64PCREL16): 859 case C (SH64PCREL16PT_32, SH64PCREL16): 860 /* We can get a PT to a relaxed SHcompact address if it is in the 861 same section; a mixed-ISA section. Change the opcode to PTB if 862 so. */ 863 if ((target_address & 1) == 0) 864 insn |= SHMEDIA_PTB_BIT; 865 /* Fall through. */ 866 867 case C (SH64PCREL16_32, SH64PCREL16): 868 case C (SH64PCREL16_64, SH64PCREL16): 869 /* Check that a PTA or PTB points to the right type of target. We 870 can get here for a SHcompact target if we are in a mixed-ISA 871 section. */ 872 if (((target_address & 1) == 0) && ((insn & SHMEDIA_PTB_BIT) == 0)) 873 as_bad_where (fragP->fr_file, fragP->fr_line, 874 _("PTA operand is a SHcompact symbol")); 875 if (((target_address & 1) != 0) && ((insn & SHMEDIA_PTB_BIT) != 0)) 876 as_bad_where (fragP->fr_file, fragP->fr_line, 877 _("PTB operand is a SHmedia symbol")); 878 879 /* When relaxing, we do not output the address in the insn, but 880 instead a 1 into the low bit. This matches what the linker 881 expects to find for a BFD_RELOC_SH_PT_16 reloc, when it checks 882 correctness for PTA/PTB insn; used when the target address is 883 unknown (which is not the case here). */ 884 md_number_to_chars (opcodep, 885 insn 886 | (((sh_relax 887 ? 1 : ((target_address - opcode_address) / 4)) 888 & ((1 << 16) - 1)) << 10), 889 4); 890 891 /* Note that we do not emit info that this was originally a PT since 892 we have resolved to which one of PTA or PTB it will be. */ 893 if (sh_relax) 894 fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4, 895 fragP->fr_symbol, fragP->fr_offset, 1, BFD_RELOC_SH_PT_16); 896 var_part_size = 0; 897 break; 898 899 case C (SH64PCREL16_32, SH64PCRELPLT): 900 case C (SH64PCREL16PT_32, SH64PCRELPLT): 901 reloctype = BFD_RELOC_32_PLT_PCREL; 902 reloc_needed = 1; 903 /* Fall through */ 904 905 case C (SH64PCREL16_32, SH64PCREL32): 906 case C (SH64PCREL16_64, SH64PCREL32): 907 case C (SH64PCREL16PT_32, SH64PCREL32): 908 case C (SH64PCREL16PT_64, SH64PCREL32): 909 /* In the fixed bit, put in a MOVI. */ 910 md_number_to_chars (opcodep, 911 SHMEDIA_MOVI_OPC 912 | (SHMEDIA_TEMP_REG << 4) 913 | ((((reloc_needed 914 ? 0 : (target_address - (opcode_address + 8)) 915 ) >> 16) & 65535) << 10), 916 4); 917 918 /* Fill in a SHORI for the low part. */ 919 md_number_to_chars (var_partp, 920 SHMEDIA_SHORI_OPC 921 | (SHMEDIA_TEMP_REG << 4) 922 | (((reloc_needed 923 ? 0 : (target_address - (opcode_address + 8))) 924 & 65535) << 10), 925 4); 926 927 /* End with a "PTREL R25,TRd". */ 928 md_number_to_chars (var_partp + 4, 929 SHMEDIA_PTREL_OPC | (insn & SHMEDIA_LIKELY_BIT) 930 | (SHMEDIA_TEMP_REG << 10) 931 | (insn & (7 << 4)), 932 4); 933 934 /* We need relocs only if the target symbol was undefined or if 935 we're relaxing. */ 936 if (reloc_needed) 937 { 938 fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4, 939 fragP->fr_symbol, fragP->fr_offset - 8, 1, 940 reloctype == BFD_RELOC_32_PLT_PCREL 941 ? BFD_RELOC_SH_PLT_MEDLOW16 942 : BFD_RELOC_SH_IMM_MEDLOW16_PCREL); 943 fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol, 944 fragP->fr_offset - 4, 1, 945 reloctype == BFD_RELOC_32_PLT_PCREL 946 ? BFD_RELOC_SH_PLT_LOW16 947 : BFD_RELOC_SH_IMM_LOW16_PCREL); 948 } 949 950 var_part_size = 8; 951 break; 952 953 case C (SH64PCREL16_64, SH64PCREL48): 954 case C (SH64PCREL16PT_64, SH64PCREL48): 955 /* In the fixed bit, put in a MOVI. */ 956 md_number_to_chars (opcodep, 957 SHMEDIA_MOVI_OPC 958 | (SHMEDIA_TEMP_REG << 4) 959 | ((((reloc_needed 960 ? 0 : (target_address - (opcode_address + 12)) 961 ) >> 32) & 65535) << 10), 962 4); 963 964 /* The first SHORI, for the medium part. */ 965 md_number_to_chars (var_partp, 966 SHMEDIA_SHORI_OPC 967 | (SHMEDIA_TEMP_REG << 4) 968 | ((((reloc_needed 969 ? 0 : (target_address - (opcode_address + 12)) 970 ) >> 16) & 65535) << 10), 971 4); 972 973 /* Fill in a SHORI for the low part. */ 974 md_number_to_chars (var_partp + 4, 975 SHMEDIA_SHORI_OPC 976 | (SHMEDIA_TEMP_REG << 4) 977 | (((reloc_needed 978 ? 0 : (target_address - (opcode_address + 12))) 979 & 65535) << 10), 980 4); 981 982 /* End with a "PTREL R25,TRd". */ 983 md_number_to_chars (var_partp + 8, 984 SHMEDIA_PTREL_OPC | (insn & SHMEDIA_LIKELY_BIT) 985 | (SHMEDIA_TEMP_REG << 10) 986 | (insn & (7 << 4)), 987 4); 988 989 /* We need relocs only if the target symbol was undefined or if 990 we're relaxing. */ 991 if (reloc_needed) 992 { 993 fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4, 994 fragP->fr_symbol, fragP->fr_offset - 12, 1, 995 reloctype == BFD_RELOC_32_PLT_PCREL 996 ? BFD_RELOC_SH_PLT_MEDHI16 997 : BFD_RELOC_SH_IMM_MEDHI16_PCREL); 998 fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol, 999 fragP->fr_offset - 8, 1, 1000 reloctype == BFD_RELOC_32_PLT_PCREL 1001 ? BFD_RELOC_SH_PLT_MEDLOW16 1002 : BFD_RELOC_SH_IMM_MEDLOW16_PCREL); 1003 fix_new (fragP, var_partp - fragP->fr_literal + 4, 4, fragP->fr_symbol, 1004 fragP->fr_offset - 4, 1, 1005 reloctype == BFD_RELOC_32_PLT_PCREL 1006 ? BFD_RELOC_SH_PLT_LOW16 1007 : BFD_RELOC_SH_IMM_LOW16_PCREL); 1008 } 1009 1010 var_part_size = 12; 1011 break; 1012 1013 case C (SH64PCREL16_64, SH64PCRELPLT): 1014 case C (SH64PCREL16PT_64, SH64PCRELPLT): 1015 reloctype = BFD_RELOC_32_PLT_PCREL; 1016 reloc_needed = 1; 1017 /* Fall through */ 1018 1019 case C (SH64PCREL16_64, SH64PCREL64): 1020 case C (SH64PCREL16PT_64, SH64PCREL64): 1021 /* In the fixed bit, put in a MOVI. */ 1022 md_number_to_chars (opcodep, 1023 SHMEDIA_MOVI_OPC 1024 | (SHMEDIA_TEMP_REG << 4) 1025 | ((((reloc_needed 1026 ? 0 : (target_address - (opcode_address + 16)) 1027 ) >> 48) & 65535) << 10), 1028 4); 1029 1030 /* The first SHORI, for the medium-high part. */ 1031 md_number_to_chars (var_partp, 1032 SHMEDIA_SHORI_OPC 1033 | (SHMEDIA_TEMP_REG << 4) 1034 | ((((reloc_needed 1035 ? 0 : (target_address - (opcode_address + 16)) 1036 ) >> 32) & 65535) << 10), 1037 4); 1038 1039 /* A SHORI, for the medium-low part. */ 1040 md_number_to_chars (var_partp + 4, 1041 SHMEDIA_SHORI_OPC 1042 | (SHMEDIA_TEMP_REG << 4) 1043 | ((((reloc_needed 1044 ? 0 : (target_address - (opcode_address + 16)) 1045 ) >> 16) & 65535) << 10), 1046 4); 1047 1048 /* Fill in a SHORI for the low part. */ 1049 md_number_to_chars (var_partp + 8, 1050 SHMEDIA_SHORI_OPC 1051 | (SHMEDIA_TEMP_REG << 4) 1052 | (((reloc_needed 1053 ? 0 : (target_address - (opcode_address + 16))) 1054 & 65535) << 10), 1055 4); 1056 1057 /* End with a "PTREL R25,TRd". */ 1058 md_number_to_chars (var_partp + 12, 1059 SHMEDIA_PTREL_OPC | (insn & SHMEDIA_LIKELY_BIT) 1060 | (SHMEDIA_TEMP_REG << 10) 1061 | (insn & (7 << 4)), 1062 4); 1063 1064 /* We need relocs only if the target symbol was undefined or if 1065 we're relaxing. */ 1066 if (reloc_needed) 1067 { 1068 fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4, 1069 fragP->fr_symbol, fragP->fr_offset - 16, 1, 1070 reloctype == BFD_RELOC_32_PLT_PCREL 1071 ? BFD_RELOC_SH_PLT_HI16 1072 : BFD_RELOC_SH_IMM_HI16_PCREL); 1073 fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol, 1074 fragP->fr_offset - 12, 1, 1075 reloctype == BFD_RELOC_32_PLT_PCREL 1076 ? BFD_RELOC_SH_PLT_MEDHI16 1077 : BFD_RELOC_SH_IMM_MEDHI16_PCREL); 1078 fix_new (fragP, var_partp - fragP->fr_literal + 4, 4, fragP->fr_symbol, 1079 fragP->fr_offset - 8, 1, 1080 reloctype == BFD_RELOC_32_PLT_PCREL 1081 ? BFD_RELOC_SH_PLT_MEDLOW16 1082 : BFD_RELOC_SH_IMM_MEDLOW16_PCREL); 1083 fix_new (fragP, var_partp - fragP->fr_literal + 8, 4, fragP->fr_symbol, 1084 fragP->fr_offset - 4, 1, 1085 reloctype == BFD_RELOC_32_PLT_PCREL 1086 ? BFD_RELOC_SH_PLT_LOW16 1087 : BFD_RELOC_SH_IMM_LOW16_PCREL); 1088 } 1089 1090 var_part_size = 16; 1091 break; 1092 1093 case C (MOVI_IMM_64, MOVI_GOTOFF): 1094 reloctype = BFD_RELOC_32_GOTOFF; 1095 reloc_needed = 1; 1096 /* Fall through. */ 1097 1098 case C (MOVI_IMM_64, UNDEF_MOVI): 1099 case C (MOVI_IMM_64, MOVI_64): 1100 { 1101 /* We only get here for undefined symbols, so we can simplify 1102 handling compared to those above; we have 0 in the parts that 1103 will be filled with the symbol parts. */ 1104 1105 int reg = (insn >> 4) & 0x3f; 1106 1107 /* In the fixed bit, put in a MOVI. */ 1108 md_number_to_chars (opcodep, SHMEDIA_MOVI_OPC | (reg << 4), 4); 1109 fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4, 1110 fragP->fr_symbol, fragP->fr_offset, 0, 1111 reloctype == BFD_RELOC_NONE 1112 ? BFD_RELOC_SH_IMM_HI16 1113 : reloctype == BFD_RELOC_32_GOTOFF 1114 ? BFD_RELOC_SH_GOTOFF_HI16 1115 : (abort (), BFD_RELOC_SH_IMM_HI16)); 1116 1117 /* The first SHORI, for the medium-high part. */ 1118 md_number_to_chars (var_partp, SHMEDIA_SHORI_OPC | (reg << 4), 4); 1119 fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol, 1120 fragP->fr_offset, 0, 1121 reloctype == BFD_RELOC_NONE 1122 ? BFD_RELOC_SH_IMM_MEDHI16 1123 : reloctype == BFD_RELOC_32_GOTOFF 1124 ? BFD_RELOC_SH_GOTOFF_MEDHI16 1125 : (abort (), BFD_RELOC_SH_IMM_MEDHI16)); 1126 1127 /* A SHORI, for the medium-low part. */ 1128 md_number_to_chars (var_partp + 4, 1129 SHMEDIA_SHORI_OPC | (reg << 4), 4); 1130 fix_new (fragP, var_partp - fragP->fr_literal + 4, 4, fragP->fr_symbol, 1131 fragP->fr_offset, 0, 1132 reloctype == BFD_RELOC_NONE 1133 ? BFD_RELOC_SH_IMM_MEDLOW16 1134 : reloctype == BFD_RELOC_32_GOTOFF 1135 ? BFD_RELOC_SH_GOTOFF_MEDLOW16 1136 : (abort (), BFD_RELOC_SH_IMM_MEDLOW16)); 1137 1138 /* Fill in a SHORI for the low part. */ 1139 md_number_to_chars (var_partp + 8, 1140 SHMEDIA_SHORI_OPC | (reg << 4), 4); 1141 fix_new (fragP, var_partp - fragP->fr_literal + 8, 4, fragP->fr_symbol, 1142 fragP->fr_offset, 0, 1143 reloctype == BFD_RELOC_NONE 1144 ? BFD_RELOC_SH_IMM_LOW16 1145 : reloctype == BFD_RELOC_32_GOTOFF 1146 ? BFD_RELOC_SH_GOTOFF_LOW16 1147 : (abort (), BFD_RELOC_SH_IMM_LOW16)); 1148 1149 var_part_size = 12; 1150 break; 1151 } 1152 1153 case C (MOVI_IMM_32, MOVI_GOTOFF): 1154 reloctype = BFD_RELOC_32_GOTOFF; 1155 reloc_needed = 1; 1156 /* Fall through. */ 1157 1158 case C (MOVI_IMM_32, UNDEF_MOVI): 1159 case C (MOVI_IMM_32, MOVI_32): 1160 { 1161 /* Note that we only get here for undefined symbols. */ 1162 1163 int reg = (insn >> 4) & 0x3f; 1164 1165 /* A MOVI, for the high part. */ 1166 md_number_to_chars (opcodep, SHMEDIA_MOVI_OPC | (reg << 4), 4); 1167 fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4, 1168 fragP->fr_symbol, fragP->fr_offset, 0, 1169 reloctype == BFD_RELOC_NONE 1170 ? BFD_RELOC_SH_IMM_MEDLOW16 1171 : reloctype == BFD_RELOC_32_GOTOFF 1172 ? BFD_RELOC_SH_GOTOFF_MEDLOW16 1173 : reloctype == BFD_RELOC_SH_GOTPC 1174 ? BFD_RELOC_SH_GOTPC_MEDLOW16 1175 : reloctype == BFD_RELOC_32_PLT_PCREL 1176 ? BFD_RELOC_SH_PLT_MEDLOW16 1177 : (abort (), BFD_RELOC_SH_IMM_MEDLOW16)); 1178 1179 /* Fill in a SHORI for the low part. */ 1180 md_number_to_chars (var_partp, 1181 SHMEDIA_SHORI_OPC | (reg << 4), 4); 1182 fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol, 1183 fragP->fr_offset, 0, 1184 reloctype == BFD_RELOC_NONE 1185 ? BFD_RELOC_SH_IMM_LOW16 1186 : reloctype == BFD_RELOC_32_GOTOFF 1187 ? BFD_RELOC_SH_GOTOFF_LOW16 1188 : reloctype == BFD_RELOC_SH_GOTPC 1189 ? BFD_RELOC_SH_GOTPC_LOW16 1190 : reloctype == BFD_RELOC_32_PLT_PCREL 1191 ? BFD_RELOC_SH_PLT_LOW16 1192 : (abort (), BFD_RELOC_SH_IMM_LOW16)); 1193 1194 var_part_size = 4; 1195 break; 1196 } 1197 1198 case C (MOVI_IMM_32_PCREL, MOVI_16): 1199 case C (MOVI_IMM_64_PCREL, MOVI_16): 1200 md_number_to_chars (opcodep, 1201 insn 1202 | (((reloc_needed 1203 ? 0 : (target_address - opcode_address)) 1204 & 65535) << 10), 1205 4); 1206 if (reloc_needed) 1207 fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4, 1208 fragP->fr_symbol, fragP->fr_offset, 1, 1209 BFD_RELOC_SH_IMM_LOW16_PCREL); 1210 var_part_size = 0; 1211 break; 1212 1213 case C (MOVI_IMM_32, MOVI_16): 1214 case C (MOVI_IMM_64, MOVI_16): 1215 md_number_to_chars (opcodep, 1216 insn 1217 | (((reloc_needed ? 0 : target_address) 1218 & 65535) << 10), 1219 4); 1220 if (reloc_needed) 1221 abort (); 1222 var_part_size = 0; 1223 break; 1224 1225 case C (MOVI_IMM_32_PCREL, MOVI_PLT): 1226 reloctype = BFD_RELOC_32_PLT_PCREL; 1227 goto movi_imm_32_pcrel_reloc_needed; 1228 1229 case C (MOVI_IMM_32_PCREL, MOVI_GOTPC): 1230 reloctype = BFD_RELOC_SH_GOTPC; 1231 /* Fall through. */ 1232 1233 movi_imm_32_pcrel_reloc_needed: 1234 reloc_needed = 1; 1235 /* Fall through. */ 1236 1237 case C (MOVI_IMM_32_PCREL, MOVI_32): 1238 case C (MOVI_IMM_64_PCREL, MOVI_32): 1239 { 1240 int reg = (insn >> 4) & 0x3f; 1241 1242 md_number_to_chars (opcodep, 1243 insn 1244 | (((((reloc_needed 1245 ? 0 : (target_address - opcode_address))) 1246 >> 16) & 65535) << 10), 4); 1247 1248 /* A SHORI, for the low part. */ 1249 md_number_to_chars (var_partp, 1250 SHMEDIA_SHORI_OPC 1251 | (reg << 4) 1252 | (((reloc_needed 1253 ? 0 : (target_address - opcode_address)) 1254 & 65535) << 10), 4); 1255 if (reloc_needed) 1256 { 1257 fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4, 1258 fragP->fr_symbol, fragP->fr_offset, 1, 1259 reloctype == BFD_RELOC_NONE 1260 ? BFD_RELOC_SH_IMM_MEDLOW16_PCREL 1261 : reloctype == BFD_RELOC_SH_GOTPC 1262 ? BFD_RELOC_SH_GOTPC_MEDLOW16 1263 : reloctype == BFD_RELOC_32_PLT_PCREL 1264 ? BFD_RELOC_SH_PLT_MEDLOW16 1265 : (abort (), BFD_RELOC_SH_IMM_MEDLOW16_PCREL)); 1266 fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol, 1267 fragP->fr_offset + 4, 1, 1268 reloctype == BFD_RELOC_NONE 1269 ? BFD_RELOC_SH_IMM_LOW16_PCREL 1270 : reloctype == BFD_RELOC_SH_GOTPC 1271 ? BFD_RELOC_SH_GOTPC_LOW16 1272 : reloctype == BFD_RELOC_32_PLT_PCREL 1273 ? BFD_RELOC_SH_PLT_LOW16 1274 : (abort (), BFD_RELOC_SH_IMM_LOW16_PCREL)); 1275 } 1276 var_part_size = 4; 1277 } 1278 break; 1279 1280 case C (MOVI_IMM_32_PCREL, MOVI_48): 1281 case C (MOVI_IMM_64_PCREL, MOVI_48): 1282 { 1283 int reg = (insn >> 4) & 0x3f; 1284 1285 md_number_to_chars (opcodep, 1286 insn 1287 | (((((reloc_needed 1288 ? 0 : (target_address - opcode_address))) 1289 >> 32) & 65535) << 10), 4); 1290 1291 /* A SHORI, for the medium part. */ 1292 md_number_to_chars (var_partp, 1293 SHMEDIA_SHORI_OPC 1294 | (reg << 4) 1295 | ((((reloc_needed 1296 ? 0 : (target_address - opcode_address)) 1297 >> 16) & 65535) << 10), 4); 1298 1299 /* A SHORI, for the low part. */ 1300 md_number_to_chars (var_partp + 4, 1301 SHMEDIA_SHORI_OPC 1302 | (reg << 4) 1303 | (((reloc_needed 1304 ? 0 : (target_address - opcode_address)) 1305 & 65535) << 10), 4); 1306 if (reloc_needed) 1307 { 1308 fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4, 1309 fragP->fr_symbol, fragP->fr_offset, 1, 1310 BFD_RELOC_SH_IMM_MEDHI16_PCREL); 1311 fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol, 1312 fragP->fr_offset + 4, 1, BFD_RELOC_SH_IMM_MEDLOW16_PCREL); 1313 fix_new (fragP, var_partp - fragP->fr_literal + 4, 4, fragP->fr_symbol, 1314 fragP->fr_offset + 8, 1, BFD_RELOC_SH_IMM_LOW16_PCREL); 1315 } 1316 var_part_size = 8; 1317 } 1318 break; 1319 1320 case C (MOVI_IMM_64_PCREL, MOVI_PLT): 1321 reloctype = BFD_RELOC_32_PLT_PCREL; 1322 goto movi_imm_64_pcrel_reloc_needed; 1323 1324 case C (MOVI_IMM_64_PCREL, MOVI_GOTPC): 1325 reloctype = BFD_RELOC_SH_GOTPC; 1326 /* Fall through. */ 1327 1328 movi_imm_64_pcrel_reloc_needed: 1329 reloc_needed = 1; 1330 /* Fall through. */ 1331 1332 case C (MOVI_IMM_32_PCREL, MOVI_64): 1333 case C (MOVI_IMM_64_PCREL, MOVI_64): 1334 { 1335 int reg = (insn >> 4) & 0x3f; 1336 1337 md_number_to_chars (opcodep, 1338 insn 1339 | (((((reloc_needed 1340 ? 0 : (target_address - opcode_address))) 1341 >> 48) & 65535) << 10), 4); 1342 1343 /* A SHORI, for the medium-high part. */ 1344 md_number_to_chars (var_partp, 1345 SHMEDIA_SHORI_OPC 1346 | (reg << 4) 1347 | ((((reloc_needed 1348 ? 0 : (target_address - opcode_address)) 1349 >> 32) & 65535) << 10), 4); 1350 1351 /* A SHORI, for the medium-low part. */ 1352 md_number_to_chars (var_partp + 4, 1353 SHMEDIA_SHORI_OPC 1354 | (reg << 4) 1355 | ((((reloc_needed 1356 ? 0 : (target_address - opcode_address)) 1357 >> 16) & 65535) << 10), 4); 1358 1359 /* A SHORI, for the low part. */ 1360 md_number_to_chars (var_partp + 8, 1361 SHMEDIA_SHORI_OPC 1362 | (reg << 4) 1363 | (((reloc_needed 1364 ? 0 : (target_address - opcode_address)) 1365 & 65535) << 10), 4); 1366 if (reloc_needed) 1367 { 1368 fix_new (opc_fragP, opcodep - opc_fragP->fr_literal, 4, 1369 fragP->fr_symbol, fragP->fr_offset, 1, 1370 reloctype == BFD_RELOC_NONE 1371 ? BFD_RELOC_SH_IMM_HI16_PCREL 1372 : reloctype == BFD_RELOC_SH_GOTPC 1373 ? BFD_RELOC_SH_GOTPC_HI16 1374 : reloctype == BFD_RELOC_32_PLT_PCREL 1375 ? BFD_RELOC_SH_PLT_HI16 1376 : (abort (), BFD_RELOC_SH_IMM_HI16_PCREL)); 1377 fix_new (fragP, var_partp - fragP->fr_literal, 4, fragP->fr_symbol, 1378 fragP->fr_offset + 4, 1, 1379 reloctype == BFD_RELOC_NONE 1380 ? BFD_RELOC_SH_IMM_MEDHI16_PCREL 1381 : reloctype == BFD_RELOC_SH_GOTPC 1382 ? BFD_RELOC_SH_GOTPC_MEDHI16 1383 : reloctype == BFD_RELOC_32_PLT_PCREL 1384 ? BFD_RELOC_SH_PLT_MEDHI16 1385 : (abort (), BFD_RELOC_SH_IMM_MEDHI16_PCREL)); 1386 fix_new (fragP, var_partp - fragP->fr_literal + 4, 4, 1387 fragP->fr_symbol, 1388 fragP->fr_offset + 8, 1, 1389 reloctype == BFD_RELOC_NONE 1390 ? BFD_RELOC_SH_IMM_MEDLOW16_PCREL 1391 : reloctype == BFD_RELOC_SH_GOTPC 1392 ? BFD_RELOC_SH_GOTPC_MEDLOW16 1393 : reloctype == BFD_RELOC_32_PLT_PCREL 1394 ? BFD_RELOC_SH_PLT_MEDLOW16 1395 : (abort (), BFD_RELOC_SH_IMM_MEDLOW16_PCREL)); 1396 fix_new (fragP, var_partp - fragP->fr_literal + 8, 4, 1397 fragP->fr_symbol, 1398 fragP->fr_offset + 12, 1, 1399 reloctype == BFD_RELOC_NONE 1400 ? BFD_RELOC_SH_IMM_LOW16_PCREL 1401 : reloctype == BFD_RELOC_SH_GOTPC 1402 ? BFD_RELOC_SH_GOTPC_LOW16 1403 : reloctype == BFD_RELOC_32_PLT_PCREL 1404 ? BFD_RELOC_SH_PLT_LOW16 1405 : (abort (), BFD_RELOC_SH_IMM_LOW16_PCREL)); 1406 } 1407 var_part_size = 12; 1408 } 1409 break; 1410 1411 default: 1412 BAD_CASE (fragP->fr_subtype); 1413 } 1414 1415 fragP->fr_fix += var_part_size; 1416 fragP->fr_var = 0; 1417 } 1418 1419 /* Mask NUMBER (originating from a signed number) corresponding to the HOW 1420 reloc. */ 1421 1422 static unsigned long 1423 shmedia_mask_number (unsigned long number, bfd_reloc_code_real_type how) 1424 { 1425 switch (how) 1426 { 1427 case BFD_RELOC_SH_IMMU5: 1428 number &= (1 << 5) - 1; 1429 break; 1430 1431 case BFD_RELOC_SH_IMMS6: 1432 case BFD_RELOC_SH_IMMU6: 1433 number &= (1 << 6) - 1; 1434 break; 1435 1436 case BFD_RELOC_SH_IMMS6BY32: 1437 number = (number & ((1 << (6 + 5)) - 1)) >> 5; 1438 break; 1439 1440 case BFD_RELOC_SH_IMMS10: 1441 number &= (1 << 10) - 1; 1442 break; 1443 1444 case BFD_RELOC_SH_IMMS10BY2: 1445 number = (number & ((1 << (10 + 1)) - 1)) >> 1; 1446 break; 1447 1448 case BFD_RELOC_SH_IMMS10BY4: 1449 number = (number & ((1 << (10 + 2)) - 1)) >> 2; 1450 break; 1451 1452 case BFD_RELOC_SH_IMMS10BY8: 1453 number = (number & ((1 << (10 + 3)) - 1)) >> 3; 1454 break; 1455 1456 case BFD_RELOC_SH_IMMS16: 1457 case BFD_RELOC_SH_IMMU16: 1458 number &= (1 << 16) - 1; 1459 break; 1460 1461 default: 1462 BAD_CASE (how); 1463 } 1464 1465 return number; 1466 } 1467 1468 /* Emit errors for values out-of-range, using as_bad_where if FRAGP is 1469 non-NULL, as_bad otherwise. */ 1470 1471 static void 1472 shmedia_check_limits (offsetT *valp, bfd_reloc_code_real_type reloc, 1473 fixS *fixp) 1474 { 1475 offsetT val = *valp; 1476 1477 char *msg = NULL; 1478 1479 switch (reloc) 1480 { 1481 case BFD_RELOC_SH_IMMU5: 1482 if (val < 0 || val > (1 << 5) - 1) 1483 msg = _("invalid operand, not a 5-bit unsigned value: %d"); 1484 break; 1485 1486 case BFD_RELOC_SH_IMMS6: 1487 if (val < -(1 << 5) || val > (1 << 5) - 1) 1488 msg = _("invalid operand, not a 6-bit signed value: %d"); 1489 break; 1490 1491 case BFD_RELOC_SH_IMMU6: 1492 if (val < 0 || val > (1 << 6) - 1) 1493 msg = _("invalid operand, not a 6-bit unsigned value: %d"); 1494 break; 1495 1496 case BFD_RELOC_SH_IMMS6BY32: 1497 if (val < -(1 << 10) || val > (1 << 10) - 1) 1498 msg = _("invalid operand, not a 11-bit signed value: %d"); 1499 else if (val & 31) 1500 msg = _("invalid operand, not a multiple of 32: %d"); 1501 break; 1502 1503 case BFD_RELOC_SH_IMMS10: 1504 if (val < -(1 << 9) || val > (1 << 9) - 1) 1505 msg = _("invalid operand, not a 10-bit signed value: %d"); 1506 break; 1507 1508 case BFD_RELOC_SH_IMMS10BY2: 1509 if (val < -(1 << 10) || val > (1 << 10) - 1) 1510 msg = _("invalid operand, not a 11-bit signed value: %d"); 1511 else if (val & 1) 1512 msg = _("invalid operand, not an even value: %d"); 1513 break; 1514 1515 case BFD_RELOC_SH_IMMS10BY4: 1516 if (val < -(1 << 11) || val > (1 << 11) - 1) 1517 msg = _("invalid operand, not a 12-bit signed value: %d"); 1518 else if (val & 3) 1519 msg = _("invalid operand, not a multiple of 4: %d"); 1520 break; 1521 1522 case BFD_RELOC_SH_IMMS10BY8: 1523 if (val < -(1 << 12) || val > (1 << 12) - 1) 1524 msg = _("invalid operand, not a 13-bit signed value: %d"); 1525 else if (val & 7) 1526 msg = _("invalid operand, not a multiple of 8: %d"); 1527 break; 1528 1529 case BFD_RELOC_SH_IMMS16: 1530 if (val < -(1 << 15) || val > (1 << 15) - 1) 1531 msg = _("invalid operand, not a 16-bit signed value: %d"); 1532 break; 1533 1534 case BFD_RELOC_SH_IMMU16: 1535 if (val < 0 || val > (1 << 16) - 1) 1536 msg = _("invalid operand, not an 16-bit unsigned value: %d"); 1537 break; 1538 1539 case BFD_RELOC_SH_PT_16: 1540 case SHMEDIA_BFD_RELOC_PT: 1541 if (val < -(1 << 15) * 4 || val > ((1 << 15) - 1) * 4 + 1) 1542 msg = _("operand out of range for PT, PTA and PTB"); 1543 else if ((val % 4) != 0 && ((val - 1) % 4) != 0) 1544 msg = _("operand not a multiple of 4 for PT, PTA or PTB: %d"); 1545 break; 1546 1547 /* These have no limits; they take a 16-bit slice of a 32- or 64-bit 1548 number. */ 1549 case BFD_RELOC_SH_IMM_HI16: 1550 case BFD_RELOC_SH_IMM_MEDHI16: 1551 case BFD_RELOC_SH_IMM_MEDLOW16: 1552 case BFD_RELOC_SH_IMM_LOW16: 1553 case BFD_RELOC_SH_IMM_HI16_PCREL: 1554 case BFD_RELOC_SH_IMM_MEDHI16_PCREL: 1555 case BFD_RELOC_SH_IMM_MEDLOW16_PCREL: 1556 case BFD_RELOC_SH_IMM_LOW16_PCREL: 1557 1558 case BFD_RELOC_SH_SHMEDIA_CODE: 1559 break; 1560 1561 /* This one has limits out of our reach. */ 1562 case BFD_RELOC_64: 1563 break; 1564 1565 default: 1566 BAD_CASE (reloc); 1567 } 1568 1569 if (msg) 1570 { 1571 if (fixp) 1572 as_bad_where (fixp->fx_file, fixp->fx_line, msg, val); 1573 else 1574 as_bad (msg, val); 1575 } 1576 } 1577 1578 /* Handle an immediate operand by checking limits and noting it for later 1579 evaluation if not computable yet, and return a bitfield suitable to 1580 "or" into the opcode (non-zero if the value was a constant number). */ 1581 1582 static unsigned long 1583 shmedia_immediate_op (char *where, shmedia_operand_info *op, int pcrel, 1584 bfd_reloc_code_real_type how) 1585 { 1586 unsigned long retval = 0; 1587 1588 /* If this is not an absolute number, make it a fixup. A constant in 1589 place of a pc-relative operand also needs a fixup. */ 1590 if (op->immediate.X_op != O_constant || pcrel) 1591 fix_new_exp (frag_now, 1592 where - frag_now->fr_literal, 1593 4, 1594 &op->immediate, 1595 pcrel, 1596 how); 1597 else 1598 { 1599 /* Check that the number is within limits as represented by the 1600 reloc, and return the number. */ 1601 shmedia_check_limits (&op->immediate.X_add_number, how, NULL); 1602 1603 retval 1604 = shmedia_mask_number ((unsigned long) op->immediate.X_add_number, 1605 how); 1606 } 1607 1608 return retval << 10; 1609 } 1610 1611 /* Try and parse a register name case-insensitively, return the number of 1612 chars consumed. */ 1613 1614 static int 1615 shmedia_parse_reg (char *src, int *mode, int *reg, shmedia_arg_type argtype) 1616 { 1617 int l0 = TOLOWER (src[0]); 1618 int l1 = l0 ? TOLOWER (src[1]) : 0; 1619 1620 if (l0 == 'r') 1621 { 1622 if (src[1] >= '1' && src[1] <= '5') 1623 { 1624 if (src[2] >= '0' && src[2] <= '9' 1625 && ! IDENT_CHAR ((unsigned char) src[3])) 1626 { 1627 *mode = A_GREG_M; 1628 *reg = 10 * (src[1] - '0') + src[2] - '0'; 1629 return 3; 1630 } 1631 } 1632 1633 if (src[1] == '6') 1634 { 1635 if (src[2] >= '0' && src[2] <= '3' 1636 && ! IDENT_CHAR ((unsigned char) src[3])) 1637 { 1638 *mode = A_GREG_M; 1639 *reg = 60 + src[2] - '0'; 1640 return 3; 1641 } 1642 } 1643 1644 if (src[1] >= '0' && src[1] <= '9' 1645 && ! IDENT_CHAR ((unsigned char) src[2])) 1646 { 1647 *mode = A_GREG_M; 1648 *reg = (src[1] - '0'); 1649 return 2; 1650 } 1651 } 1652 1653 if (l0 == 't' && l1 == 'r') 1654 { 1655 if (src[2] >= '0' && src[2] <= '7' 1656 && ! IDENT_CHAR ((unsigned char) src[3])) 1657 { 1658 *mode = A_TREG_B; 1659 *reg = (src[2] - '0'); 1660 return 3; 1661 } 1662 } 1663 1664 if (l0 == 'f' && l1 == 'r') 1665 { 1666 if (src[2] >= '1' && src[2] <= '5') 1667 { 1668 if (src[3] >= '0' && src[3] <= '9' 1669 && ! IDENT_CHAR ((unsigned char) src[4])) 1670 { 1671 *mode = A_FREG_G; 1672 *reg = 10 * (src[2] - '0') + src[3] - '0'; 1673 return 4; 1674 } 1675 } 1676 if (src[2] == '6') 1677 { 1678 if (src[3] >= '0' && src[3] <= '3' 1679 && ! IDENT_CHAR ((unsigned char) src[4])) 1680 { 1681 *mode = A_FREG_G; 1682 *reg = 60 + src[3] - '0'; 1683 return 4; 1684 } 1685 } 1686 if (src[2] >= '0' && src[2] <= '9' 1687 && ! IDENT_CHAR ((unsigned char) src[3])) 1688 { 1689 *mode = A_FREG_G; 1690 *reg = (src[2] - '0'); 1691 return 3; 1692 } 1693 } 1694 1695 if (l0 == 'f' && l1 == 'v') 1696 { 1697 if (src[2] >= '1' && src[2] <= '5') 1698 { 1699 if (src[3] >= '0' && src[3] <= '9' 1700 && ((10 * (src[2] - '0') + src[3] - '0') % 4) == 0 1701 && ! IDENT_CHAR ((unsigned char) src[4])) 1702 { 1703 *mode = A_FVREG_G; 1704 *reg = 10 * (src[2] - '0') + src[3] - '0'; 1705 return 4; 1706 } 1707 } 1708 if (src[2] == '6') 1709 { 1710 if (src[3] == '0' 1711 && ! IDENT_CHAR ((unsigned char) src[4])) 1712 { 1713 *mode = A_FVREG_G; 1714 *reg = 60 + src[3] - '0'; 1715 return 4; 1716 } 1717 } 1718 if (src[2] >= '0' && src[2] <= '9' 1719 && ((src[2] - '0') % 4) == 0 1720 && ! IDENT_CHAR ((unsigned char) src[3])) 1721 { 1722 *mode = A_FVREG_G; 1723 *reg = (src[2] - '0'); 1724 return 3; 1725 } 1726 } 1727 1728 if (l0 == 'd' && l1 == 'r') 1729 { 1730 if (src[2] >= '1' && src[2] <= '5') 1731 { 1732 if (src[3] >= '0' && src[3] <= '9' 1733 && ((src[3] - '0') % 2) == 0 1734 && ! IDENT_CHAR ((unsigned char) src[4])) 1735 { 1736 *mode = A_DREG_G; 1737 *reg = 10 * (src[2] - '0') + src[3] - '0'; 1738 return 4; 1739 } 1740 } 1741 1742 if (src[2] == '6') 1743 { 1744 if ((src[3] == '0' || src[3] == '2') 1745 && ! IDENT_CHAR ((unsigned char) src[4])) 1746 { 1747 *mode = A_DREG_G; 1748 *reg = 60 + src[3] - '0'; 1749 return 4; 1750 } 1751 } 1752 1753 if (src[2] >= '0' && src[2] <= '9' 1754 && ((src[2] - '0') % 2) == 0 1755 && ! IDENT_CHAR ((unsigned char) src[3])) 1756 { 1757 *mode = A_DREG_G; 1758 *reg = (src[2] - '0'); 1759 return 3; 1760 } 1761 } 1762 1763 if (l0 == 'f' && l1 == 'p') 1764 { 1765 if (src[2] >= '1' && src[2] <= '5') 1766 { 1767 if (src[3] >= '0' && src[3] <= '9' 1768 && ((src[3] - '0') % 2) == 0 1769 && ! IDENT_CHAR ((unsigned char) src[4])) 1770 { 1771 *mode = A_FPREG_G; 1772 *reg = 10 * (src[2] - '0') + src[3] - '0'; 1773 return 4; 1774 } 1775 } 1776 1777 if (src[2] == '6') 1778 { 1779 if ((src[3] == '0' || src[3] == '2') 1780 && ! IDENT_CHAR ((unsigned char) src[4])) 1781 { 1782 *mode = A_FPREG_G; 1783 *reg = 60 + src[3] - '0'; 1784 return 4; 1785 } 1786 } 1787 1788 if (src[2] >= '0' && src[2] <= '9' 1789 && ((src[2] - '0') % 2) == 0 1790 && ! IDENT_CHAR ((unsigned char) src[3])) 1791 { 1792 *mode = A_FPREG_G; 1793 *reg = (src[2] - '0'); 1794 return 3; 1795 } 1796 } 1797 1798 if (l0 == 'm' && strncasecmp (src, "mtrx", 4) == 0) 1799 { 1800 if (src[4] == '0' && ! IDENT_CHAR ((unsigned char) src[5])) 1801 { 1802 *mode = A_FMREG_G; 1803 *reg = 0; 1804 return 5; 1805 } 1806 1807 if (src[4] == '1' && src[5] == '6' 1808 && ! IDENT_CHAR ((unsigned char) src[6])) 1809 { 1810 *mode = A_FMREG_G; 1811 *reg = 16; 1812 return 6; 1813 } 1814 1815 if (src[4] == '3' && src[5] == '2' 1816 && ! IDENT_CHAR ((unsigned char) src[6])) 1817 { 1818 *mode = A_FMREG_G; 1819 *reg = 32; 1820 return 6; 1821 } 1822 1823 if (src[4] == '4' && src[5] == '8' 1824 && ! IDENT_CHAR ((unsigned char) src[6])) 1825 { 1826 *mode = A_FMREG_G; 1827 *reg = 48; 1828 return 6; 1829 } 1830 } 1831 1832 if (l0 == 'c' && l1 == 'r') 1833 { 1834 if (src[2] >= '1' && src[2] <= '5') 1835 { 1836 if (src[3] >= '0' && src[3] <= '9' 1837 && ! IDENT_CHAR ((unsigned char) src[4])) 1838 { 1839 *mode = A_CREG_K; 1840 *reg = 10 * (src[2] - '0') + src[3] - '0'; 1841 return 4; 1842 } 1843 } 1844 if (src[2] == '6') 1845 { 1846 if (src[3] >= '0' && src[3] <= '3' 1847 && ! IDENT_CHAR ((unsigned char) src[4])) 1848 { 1849 *mode = A_CREG_K; 1850 *reg = 60 + src[3] - '0'; 1851 return 4; 1852 } 1853 } 1854 if (src[2] >= '0' && src[2] <= '9' 1855 && ! IDENT_CHAR ((unsigned char) src[3])) 1856 { 1857 *mode = A_CREG_K; 1858 *reg = (src[2] - '0'); 1859 return 3; 1860 } 1861 } 1862 1863 /* We either have an error, a symbol or a control register by predefined 1864 name. To keep things simple but still fast for normal cases, we do 1865 linear search in the (not to big) table of predefined control 1866 registers. We only do this when we *expect* a control register. 1867 Those instructions should be rare enough that linear searching is ok. 1868 Or just read them into a hash-table in shmedia_md_begin. Since they 1869 cannot be specified in the same place of symbol operands, don't add 1870 them there to the *main* symbol table as being in "reg_section". */ 1871 if (argtype == A_CREG_J || argtype == A_CREG_K) 1872 { 1873 const shmedia_creg_info *cregp; 1874 int len = 0; 1875 1876 for (cregp = shmedia_creg_table; cregp->name != NULL; cregp++) 1877 { 1878 len = strlen (cregp->name); 1879 if (strncasecmp (cregp->name, src, len) == 0 1880 && ! IDENT_CHAR (src[len])) 1881 break; 1882 } 1883 1884 if (cregp->name != NULL) 1885 { 1886 *mode = A_CREG_K; 1887 *reg = cregp->cregno; 1888 return len; 1889 } 1890 } 1891 1892 return 0; 1893 } 1894 1895 /* Called from md_estimate_size_before_relax in tc-sh.c */ 1896 1897 static int 1898 shmedia_md_estimate_size_before_relax (fragS *fragP, 1899 segT segment_type ATTRIBUTE_UNUSED) 1900 { 1901 int old_fr_fix; 1902 expressionS *exp; 1903 1904 /* For ELF, we can't relax externally visible symbols; see tc-i386.c. */ 1905 bfd_boolean sym_relaxable 1906 = (fragP->fr_symbol 1907 && S_GET_SEGMENT (fragP->fr_symbol) == segment_type 1908 && ! S_IS_EXTERNAL (fragP->fr_symbol) 1909 && ! S_IS_WEAK (fragP->fr_symbol)); 1910 1911 old_fr_fix = fragP->fr_fix; 1912 1913 switch (fragP->fr_subtype) 1914 { 1915 case C (SH64PCREL16_32, UNDEF_SH64PCREL): 1916 case C (SH64PCREL16PT_32, UNDEF_SH64PCREL): 1917 /* Used to be to somewhere which was unknown. */ 1918 if (sym_relaxable) 1919 { 1920 int what = GET_WHAT (fragP->fr_subtype); 1921 1922 /* In this segment, so head for shortest. */ 1923 fragP->fr_subtype = C (what, SH64PCREL16); 1924 } 1925 else 1926 { 1927 int what = GET_WHAT (fragP->fr_subtype); 1928 /* We know the abs value, but we don't know where we will be 1929 linked, so we must make it the longest. Presumably we could 1930 switch to a non-pcrel representation, but having absolute 1931 values in PT operands should be rare enough not to be worth 1932 adding that code. */ 1933 fragP->fr_subtype = C (what, SH64PCREL32); 1934 } 1935 fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length; 1936 break; 1937 1938 case C (SH64PCREL16_64, UNDEF_SH64PCREL): 1939 case C (SH64PCREL16PT_64, UNDEF_SH64PCREL): 1940 /* Used to be to somewhere which was unknown. */ 1941 if (sym_relaxable) 1942 { 1943 int what = GET_WHAT (fragP->fr_subtype); 1944 1945 /* In this segment, so head for shortest. */ 1946 fragP->fr_subtype = C (what, SH64PCREL16); 1947 } 1948 else 1949 { 1950 int what = GET_WHAT (fragP->fr_subtype); 1951 /* We know the abs value, but we don't know where we will be 1952 linked, so we must make it the longest. Presumably we could 1953 switch to a non-pcrel representation, but having absolute 1954 values in PT operands should be rare enough not to be worth 1955 adding that code. */ 1956 fragP->fr_subtype = C (what, SH64PCREL64); 1957 } 1958 fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length; 1959 break; 1960 1961 case C (MOVI_IMM_64, UNDEF_MOVI): 1962 case C (MOVI_IMM_32, UNDEF_MOVI): 1963 exp = NULL; 1964 1965 /* Look inside the "symbol". If we find a PC-relative expression, 1966 change this to a PC-relative, relaxable expression. */ 1967 if (fragP->fr_symbol != NULL 1968 && (exp = symbol_get_value_expression (fragP->fr_symbol)) != NULL 1969 && exp->X_op == O_subtract 1970 && exp->X_op_symbol != NULL 1971 && S_GET_SEGMENT (exp->X_op_symbol) == segment_type) 1972 { 1973 int what = GET_WHAT (fragP->fr_subtype); 1974 int what_high = what == MOVI_IMM_32 ? MOVI_32 : MOVI_64; 1975 expressionS *opexp 1976 = symbol_get_value_expression (exp->X_op_symbol); 1977 expressionS *addexp 1978 = symbol_get_value_expression (exp->X_add_symbol); 1979 1980 /* Change the MOVI expression to the "X" in "X - Y" and subtract 1981 Y:s offset to this location from X. Note that we can only 1982 allow an Y which is offset from this frag. */ 1983 if (opexp != NULL 1984 && addexp != NULL 1985 && opexp->X_op == O_constant 1986 && fragP == symbol_get_frag (exp->X_op_symbol)) 1987 { 1988 /* At this point, before relaxing, the add-number of opexp 1989 is the offset from the fr_fix part. */ 1990 fragP->fr_offset 1991 = (exp->X_add_number 1992 - (opexp->X_add_number - (fragP->fr_fix - 4))); 1993 fragP->fr_symbol = exp->X_add_symbol; 1994 1995 what = what == MOVI_IMM_32 1996 ? MOVI_IMM_32_PCREL : MOVI_IMM_64_PCREL; 1997 1998 /* Check the "X" symbol to estimate the size of this 1999 PC-relative expression. */ 2000 if (S_GET_SEGMENT (exp->X_add_symbol) == segment_type 2001 && ! S_IS_EXTERNAL (exp->X_add_symbol) 2002 && ! S_IS_WEAK (exp->X_add_symbol)) 2003 fragP->fr_subtype = C (what, MOVI_16); 2004 else 2005 fragP->fr_subtype = C (what, what_high); 2006 2007 /* This is now a PC-relative expression, fit to be relaxed. */ 2008 } 2009 else 2010 fragP->fr_subtype = C (what, what_high); 2011 } 2012 else if (fragP->fr_symbol == NULL 2013 || (S_GET_SEGMENT (fragP->fr_symbol) == absolute_section 2014 && exp->X_op == O_constant)) 2015 { 2016 unsigned long insn 2017 = (target_big_endian 2018 ? bfd_getb32 (fragP->fr_opcode) 2019 : bfd_getl32 (fragP->fr_opcode)); 2020 offsetT one = (offsetT) 1; 2021 offsetT value = fragP->fr_offset 2022 + (fragP->fr_symbol == NULL ? 0 : S_GET_VALUE (fragP->fr_symbol)); 2023 2024 if (value >= ((offsetT) -1 << 15) && value < ((offsetT) 1 << 15)) 2025 { 2026 /* Fits in 16-bit signed number. */ 2027 int what = GET_WHAT (fragP->fr_subtype); 2028 fragP->fr_subtype = C (what, MOVI_16); 2029 2030 /* Just "or" in the value. */ 2031 md_number_to_chars (fragP->fr_opcode, 2032 insn | ((value & ((1 << 16) - 1)) << 10), 2033 4); 2034 } 2035 else if (value >= -(one << 31) 2036 && (value < (one << 31) 2037 || (sh64_abi == sh64_abi_32 && value < (one << 32)))) 2038 { 2039 /* The value fits in a 32-bit signed number. */ 2040 int reg = (insn >> 4) & 0x3f; 2041 2042 /* Just "or" in the high bits of the value, making the first 2043 MOVI. */ 2044 md_number_to_chars (fragP->fr_opcode, 2045 insn 2046 | (((value >> 16) & ((1 << 16) - 1)) << 10), 2047 4); 2048 2049 /* Add a SHORI with the low bits. Note that this insn lives 2050 in the variable fragment part. */ 2051 md_number_to_chars (fragP->fr_literal + old_fr_fix, 2052 SHMEDIA_SHORI_OPC 2053 | (reg << 4) 2054 | ((value & ((1 << 16) - 1)) << 10), 2055 4); 2056 2057 /* We took a piece of the variable part. */ 2058 fragP->fr_fix += 4; 2059 } 2060 else if (GET_WHAT (fragP->fr_subtype) == MOVI_IMM_32) 2061 { 2062 /* Value out of range. */ 2063 as_bad_where (fragP->fr_file, fragP->fr_line, 2064 _("MOVI operand is not a 32-bit signed value: 0x%8x%08x"), 2065 ((unsigned int) (value >> 32) 2066 & (unsigned int) 0xffffffff), 2067 (unsigned int) value & (unsigned int) 0xffffffff); 2068 2069 /* Must advance size, or we will get internal inconsistency 2070 and fall into an assert. */ 2071 fragP->fr_fix += 4; 2072 } 2073 /* Now we know we are allowed to expand to 48- and 64-bit values. */ 2074 else if (value >= -(one << 47) && value < (one << 47)) 2075 { 2076 /* The value fits in a 48-bit signed number. */ 2077 int reg = (insn >> 4) & 0x3f; 2078 2079 /* Just "or" in the high bits of the value, making the first 2080 MOVI. */ 2081 md_number_to_chars (fragP->fr_opcode, 2082 insn 2083 | (((value >> 32) & ((1 << 16) - 1)) << 10), 2084 4); 2085 2086 /* Add a SHORI with the middle bits. Note that this insn lives 2087 in the variable fragment part. */ 2088 md_number_to_chars (fragP->fr_literal + old_fr_fix, 2089 SHMEDIA_SHORI_OPC 2090 | (reg << 4) 2091 | (((value >> 16) & ((1 << 16) - 1)) << 10), 2092 4); 2093 2094 /* Add a SHORI with the low bits. */ 2095 md_number_to_chars (fragP->fr_literal + old_fr_fix + 4, 2096 SHMEDIA_SHORI_OPC 2097 | (reg << 4) 2098 | ((value & ((1 << 16) - 1)) << 10), 2099 4); 2100 2101 /* We took a piece of the variable part. */ 2102 fragP->fr_fix += 8; 2103 } 2104 else 2105 { 2106 /* A 64-bit number. */ 2107 int reg = (insn >> 4) & 0x3f; 2108 2109 /* Just "or" in the high bits of the value, making the first 2110 MOVI. */ 2111 md_number_to_chars (fragP->fr_opcode, 2112 insn 2113 | (((value >> 48) & ((1 << 16) - 1)) << 10), 2114 4); 2115 2116 /* Add a SHORI with the midhigh bits. Note that this insn lives 2117 in the variable fragment part. */ 2118 md_number_to_chars (fragP->fr_literal + old_fr_fix, 2119 SHMEDIA_SHORI_OPC 2120 | (reg << 4) 2121 | (((value >> 32) & ((1 << 16) - 1)) << 10), 2122 4); 2123 2124 /* Add a SHORI with the midlow bits. */ 2125 md_number_to_chars (fragP->fr_literal + old_fr_fix + 4, 2126 SHMEDIA_SHORI_OPC 2127 | (reg << 4) 2128 | (((value >> 16) & ((1 << 16) - 1)) << 10), 2129 4); 2130 2131 /* Add a SHORI with the low bits. */ 2132 md_number_to_chars (fragP->fr_literal + old_fr_fix + 8, 2133 SHMEDIA_SHORI_OPC 2134 | (reg << 4) 2135 | ((value & ((1 << 16) - 1)) << 10), 4); 2136 /* We took all of the variable part. */ 2137 fragP->fr_fix += 12; 2138 } 2139 2140 /* MOVI expansions that get here have not been converted to 2141 PC-relative frags, but instead expanded by 2142 md_number_to_chars or by calling shmedia_md_convert_frag 2143 with final == FALSE. We must not have them around as 2144 frags anymore; symbols would be prematurely evaluated 2145 when relaxing. We will not need to have md_convert_frag 2146 called again with them; any further handling is through 2147 the already emitted fixups. */ 2148 frag_wane (fragP); 2149 break; 2150 } 2151 fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length; 2152 break; 2153 2154 /* For relaxation states that remain unchanged, report the 2155 estimated length. */ 2156 case C (SH64PCREL16_32, SH64PCREL16): 2157 case C (SH64PCREL16PT_32, SH64PCREL16): 2158 case C (SH64PCREL16_32, SH64PCREL32): 2159 case C (SH64PCREL16PT_32, SH64PCREL32): 2160 case C (SH64PCREL16_32, SH64PCRELPLT): 2161 case C (SH64PCREL16PT_32, SH64PCRELPLT): 2162 case C (SH64PCREL16_64, SH64PCREL16): 2163 case C (SH64PCREL16PT_64, SH64PCREL16): 2164 case C (SH64PCREL16_64, SH64PCREL32): 2165 case C (SH64PCREL16PT_64, SH64PCREL32): 2166 case C (SH64PCREL16_64, SH64PCREL48): 2167 case C (SH64PCREL16PT_64, SH64PCREL48): 2168 case C (SH64PCREL16_64, SH64PCREL64): 2169 case C (SH64PCREL16PT_64, SH64PCREL64): 2170 case C (SH64PCREL16_64, SH64PCRELPLT): 2171 case C (SH64PCREL16PT_64, SH64PCRELPLT): 2172 case C (MOVI_IMM_32, MOVI_16): 2173 case C (MOVI_IMM_32, MOVI_32): 2174 case C (MOVI_IMM_32, MOVI_GOTOFF): 2175 case C (MOVI_IMM_32_PCREL, MOVI_16): 2176 case C (MOVI_IMM_32_PCREL, MOVI_32): 2177 case C (MOVI_IMM_32_PCREL, MOVI_PLT): 2178 case C (MOVI_IMM_32_PCREL, MOVI_GOTPC): 2179 case C (MOVI_IMM_64, MOVI_16): 2180 case C (MOVI_IMM_64, MOVI_32): 2181 case C (MOVI_IMM_64, MOVI_48): 2182 case C (MOVI_IMM_64, MOVI_64): 2183 case C (MOVI_IMM_64, MOVI_GOTOFF): 2184 case C (MOVI_IMM_64_PCREL, MOVI_16): 2185 case C (MOVI_IMM_64_PCREL, MOVI_32): 2186 case C (MOVI_IMM_64_PCREL, MOVI_48): 2187 case C (MOVI_IMM_64_PCREL, MOVI_64): 2188 case C (MOVI_IMM_64_PCREL, MOVI_PLT): 2189 case C (MOVI_IMM_64_PCREL, MOVI_GOTPC): 2190 fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length; 2191 break; 2192 2193 default: 2194 abort (); 2195 } 2196 2197 return fragP->fr_var + (fragP->fr_fix - old_fr_fix); 2198 } 2199 2200 /* Parse an expression, SH64-style. Copied from tc-sh.c, but with 2201 datatypes adjusted. */ 2202 2203 static char * 2204 shmedia_parse_exp (char *s, shmedia_operand_info *op) 2205 { 2206 char *save; 2207 char *new; 2208 2209 save = input_line_pointer; 2210 input_line_pointer = s; 2211 expression (&op->immediate); 2212 if (op->immediate.X_op == O_absent) 2213 as_bad (_("missing operand")); 2214 new = input_line_pointer; 2215 input_line_pointer = save; 2216 return new; 2217 } 2218 2219 /* Parse an operand. Store pointer to next character in *PTR. */ 2220 2221 static void 2222 shmedia_get_operand (char **ptr, shmedia_operand_info *op, 2223 shmedia_arg_type argtype) 2224 { 2225 char *src = *ptr; 2226 int mode = -1; 2227 unsigned int len; 2228 2229 len = shmedia_parse_reg (src, &mode, &(op->reg), argtype); 2230 if (len) 2231 { 2232 *ptr = src + len; 2233 op->type = mode; 2234 } 2235 else 2236 { 2237 /* Not a reg, so it must be a displacement. */ 2238 *ptr = shmedia_parse_exp (src, op); 2239 op->type = A_IMMM; 2240 2241 /* This is just an initialization; shmedia_get_operands will change 2242 as needed. */ 2243 op->reloctype = BFD_RELOC_NONE; 2244 } 2245 } 2246 2247 /* Parse the operands for this insn; return NULL if invalid, else return 2248 how much text was consumed. */ 2249 2250 static char * 2251 shmedia_get_operands (shmedia_opcode_info *info, char *args, 2252 shmedia_operands_info *operands) 2253 { 2254 char *ptr = args; 2255 int i; 2256 2257 if (*ptr == ' ') 2258 ptr++; 2259 2260 for (i = 0; info->arg[i] != 0; i++) 2261 { 2262 memset (operands->operands + i, 0, sizeof (operands->operands[0])); 2263 2264 /* No operand to get for these fields. */ 2265 if (info->arg[i] == A_REUSE_PREV) 2266 continue; 2267 2268 shmedia_get_operand (&ptr, &operands->operands[i], info->arg[i]); 2269 2270 /* Check operands type match. */ 2271 switch (info->arg[i]) 2272 { 2273 case A_GREG_M: 2274 case A_GREG_N: 2275 case A_GREG_D: 2276 if (operands->operands[i].type != A_GREG_M) 2277 return NULL; 2278 break; 2279 2280 case A_FREG_G: 2281 case A_FREG_H: 2282 case A_FREG_F: 2283 if (operands->operands[i].type != A_FREG_G) 2284 return NULL; 2285 break; 2286 2287 case A_FVREG_G: 2288 case A_FVREG_H: 2289 case A_FVREG_F: 2290 if (operands->operands[i].type != A_FVREG_G) 2291 return NULL; 2292 break; 2293 2294 case A_FMREG_G: 2295 case A_FMREG_H: 2296 case A_FMREG_F: 2297 if (operands->operands[i].type != A_FMREG_G) 2298 return NULL; 2299 break; 2300 2301 case A_FPREG_G: 2302 case A_FPREG_H: 2303 case A_FPREG_F: 2304 if (operands->operands[i].type != A_FPREG_G) 2305 return NULL; 2306 break; 2307 2308 case A_DREG_G: 2309 case A_DREG_H: 2310 case A_DREG_F: 2311 if (operands->operands[i].type != A_DREG_G) 2312 return NULL; 2313 break; 2314 2315 case A_TREG_A: 2316 case A_TREG_B: 2317 if (operands->operands[i].type != A_TREG_B) 2318 return NULL; 2319 break; 2320 2321 case A_CREG_J: 2322 case A_CREG_K: 2323 if (operands->operands[i].type != A_CREG_K) 2324 return NULL; 2325 break; 2326 2327 case A_IMMS16: 2328 case A_IMMU16: 2329 /* Check for an expression that looks like S & 65535 or 2330 (S >> N) & 65535, where N = 0, 16, 32, 48. 2331 2332 Get the S and put at operands->operands[i].immediate, and 2333 adjust operands->operands[i].reloctype. */ 2334 { 2335 expressionS *imm_expr = &operands->operands[i].immediate; 2336 expressionS *right_expr; 2337 2338 if (operands->operands[i].type == A_IMMM 2339 && imm_expr->X_op == O_bit_and 2340 && imm_expr->X_op_symbol != NULL 2341 && ((right_expr 2342 = symbol_get_value_expression (imm_expr->X_op_symbol)) 2343 ->X_op == O_constant) 2344 && right_expr->X_add_number == 0xffff) 2345 { 2346 symbolS *inner = imm_expr->X_add_symbol; 2347 bfd_reloc_code_real_type reloctype = BFD_RELOC_SH_IMM_LOW16; 2348 expressionS *inner_expr 2349 = symbol_get_value_expression (inner); 2350 2351 if (inner_expr->X_op == O_right_shift) 2352 { 2353 expressionS *inner_right; 2354 2355 if (inner_expr->X_op_symbol != NULL 2356 && ((inner_right 2357 = symbol_get_value_expression (inner_expr 2358 ->X_op_symbol)) 2359 ->X_op == O_constant)) 2360 { 2361 offsetT addnum 2362 = inner_right->X_add_number; 2363 2364 if (addnum == 0 || addnum == 16 || addnum == 32 2365 || addnum == 48) 2366 { 2367 reloctype 2368 = (addnum == 0 2369 ? BFD_RELOC_SH_IMM_LOW16 2370 : (addnum == 16 2371 ? BFD_RELOC_SH_IMM_MEDLOW16 2372 : (addnum == 32 2373 ? BFD_RELOC_SH_IMM_MEDHI16 2374 : BFD_RELOC_SH_IMM_HI16))); 2375 2376 inner = inner_expr->X_add_symbol; 2377 inner_expr = symbol_get_value_expression (inner); 2378 } 2379 } 2380 } 2381 2382 /* I'm not sure I understand the logic, but evidently the 2383 inner expression of a lone symbol is O_constant, with 2384 the actual symbol in expr_section. For a constant, the 2385 section would be absolute_section. For sym+offset, 2386 it's O_symbol as always. See expr.c:make_expr_symbol, 2387 first statements. */ 2388 2389 if (inner_expr->X_op == O_constant 2390 && S_GET_SEGMENT (inner) != absolute_section) 2391 { 2392 operands->operands[i].immediate.X_op = O_symbol; 2393 operands->operands[i].immediate.X_add_symbol = inner; 2394 operands->operands[i].immediate.X_add_number = 0; 2395 } 2396 else 2397 operands->operands[i].immediate 2398 = *symbol_get_value_expression (inner); 2399 2400 operands->operands[i].reloctype = reloctype; 2401 } 2402 } 2403 /* Fall through. */ 2404 case A_IMMS6: 2405 case A_IMMS6BY32: 2406 case A_IMMS10: 2407 case A_IMMS10BY1: 2408 case A_IMMS10BY2: 2409 case A_IMMS10BY4: 2410 case A_IMMS10BY8: 2411 case A_PCIMMS16BY4: 2412 case A_PCIMMS16BY4_PT: 2413 case A_IMMU5: 2414 case A_IMMU6: 2415 if (operands->operands[i].type != A_IMMM) 2416 return NULL; 2417 2418 if (sh_check_fixup (&operands->operands[i].immediate, 2419 &operands->operands[i].reloctype)) 2420 { 2421 as_bad (_("invalid PIC reference")); 2422 return NULL; 2423 } 2424 2425 break; 2426 2427 default: 2428 BAD_CASE (info->arg[i]); 2429 } 2430 2431 if (*ptr == ',' && info->arg[i + 1]) 2432 ptr++; 2433 } 2434 return ptr; 2435 } 2436 2437 2438 /* Find an opcode at the start of *STR_P in the hash table, and set 2439 *STR_P to the first character after the last one read. */ 2440 2441 static shmedia_opcode_info * 2442 shmedia_find_cooked_opcode (char **str_p) 2443 { 2444 char *str = *str_p; 2445 char *op_start; 2446 char *op_end; 2447 char name[20]; 2448 unsigned int nlen = 0; 2449 2450 /* Drop leading whitespace. */ 2451 while (*str == ' ') 2452 str++; 2453 2454 /* Find the op code end. */ 2455 for (op_start = op_end = str; 2456 *op_end 2457 && nlen < sizeof (name) - 1 2458 && ! is_end_of_line[(unsigned char) *op_end] 2459 && ! ISSPACE ((unsigned char) *op_end); 2460 op_end++) 2461 { 2462 unsigned char c = op_start[nlen]; 2463 2464 /* The machine independent code will convert CMP/EQ into cmp/EQ 2465 because it thinks the '/' is the end of the symbol. Moreover, 2466 all but the first sub-insn is a parallel processing insn won't 2467 be capitalized. Instead of hacking up the machine independent 2468 code, we just deal with it here. */ 2469 c = TOLOWER (c); 2470 name[nlen] = c; 2471 nlen++; 2472 } 2473 2474 name[nlen] = 0; 2475 *str_p = op_end; 2476 2477 if (nlen == 0) 2478 as_bad (_("can't find opcode")); 2479 2480 return 2481 (shmedia_opcode_info *) hash_find (shmedia_opcode_hash_control, name); 2482 } 2483 2484 /* Build up an instruction, including allocating the frag. */ 2485 2486 static int 2487 shmedia_build_Mytes (shmedia_opcode_info *opcode, 2488 shmedia_operands_info *operands) 2489 { 2490 unsigned long insn = opcode->opcode_base; 2491 int i, j; 2492 char *insn_loc = frag_more (4); 2493 2494 /* The parameter to dwarf2_emit_insn is actually the offset to the start 2495 of the insn from the fix piece of instruction that was emitted. 2496 Since we want .debug_line addresses to record (address | 1) for 2497 SHmedia insns, we get the wanted effect by taking one off the size, 2498 knowing it's a multiple of 4. We count from the first fix piece of 2499 the insn. There must be no frags changes (frag_more or frag_var) 2500 calls in-between the frag_more call we account for, and this 2501 dwarf2_emit_insn call. */ 2502 dwarf2_emit_insn (3); 2503 2504 /* This is stored into any frag_var operand. */ 2505 sh64_last_insn_frag = frag_now; 2506 2507 /* Loop over opcode info, emit an instruction. */ 2508 for (i = 0, j = 0; opcode->arg[i]; i++) 2509 { 2510 shmedia_arg_type argtype = opcode->arg[i]; 2511 shmedia_operand_info *opjp = &operands->operands[j]; 2512 switch (argtype) 2513 { 2514 case A_TREG_A: 2515 case A_TREG_B: 2516 case A_GREG_M: 2517 case A_GREG_N: 2518 case A_GREG_D: 2519 case A_FREG_G: 2520 case A_FREG_H: 2521 case A_FREG_F: 2522 case A_FVREG_G: 2523 case A_FVREG_H: 2524 case A_FVREG_F: 2525 case A_FMREG_G: 2526 case A_FMREG_H: 2527 case A_FMREG_F: 2528 case A_FPREG_G: 2529 case A_FPREG_H: 2530 case A_FPREG_F: 2531 case A_DREG_G: 2532 case A_DREG_H: 2533 case A_DREG_F: 2534 case A_CREG_J: 2535 case A_CREG_K: 2536 /* Six-bit register fields. They just get filled with the 2537 parsed register number. */ 2538 insn |= (opjp->reg << opcode->nibbles[i]); 2539 j++; 2540 break; 2541 2542 case A_REUSE_PREV: 2543 /* Copy the register for the previous operand to this position. */ 2544 insn |= (operands->operands[j - 1].reg << opcode->nibbles[i]); 2545 j++; 2546 break; 2547 2548 case A_IMMS6: 2549 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2550 BFD_RELOC_SH_IMMS6); 2551 j++; 2552 break; 2553 2554 case A_IMMS6BY32: 2555 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2556 BFD_RELOC_SH_IMMS6BY32); 2557 j++; 2558 break; 2559 2560 case A_IMMS10BY1: 2561 case A_IMMS10: 2562 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2563 BFD_RELOC_SH_IMMS10); 2564 j++; 2565 break; 2566 2567 case A_IMMS10BY2: 2568 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2569 BFD_RELOC_SH_IMMS10BY2); 2570 j++; 2571 break; 2572 2573 case A_IMMS10BY4: 2574 if (opjp->reloctype == BFD_RELOC_NONE) 2575 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2576 BFD_RELOC_SH_IMMS10BY4); 2577 else if (opjp->reloctype == BFD_RELOC_SH_GOTPLT32) 2578 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2579 BFD_RELOC_SH_GOTPLT10BY4); 2580 else if (opjp->reloctype == BFD_RELOC_32_GOT_PCREL) 2581 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2582 BFD_RELOC_SH_GOT10BY4); 2583 else 2584 as_bad (_("invalid PIC reference")); 2585 j++; 2586 break; 2587 2588 case A_IMMS10BY8: 2589 if (opjp->reloctype == BFD_RELOC_NONE) 2590 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2591 BFD_RELOC_SH_IMMS10BY8); 2592 else if (opjp->reloctype == BFD_RELOC_SH_GOTPLT32) 2593 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2594 BFD_RELOC_SH_GOTPLT10BY8); 2595 else if (opjp->reloctype == BFD_RELOC_32_GOT_PCREL) 2596 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2597 BFD_RELOC_SH_GOT10BY8); 2598 else 2599 as_bad (_("invalid PIC reference")); 2600 j++; 2601 break; 2602 2603 case A_IMMS16: 2604 /* Sneak a peek if this is the MOVI insn. If so, check if we 2605 should expand it. */ 2606 if (opjp->reloctype == BFD_RELOC_32_GOT_PCREL) 2607 opjp->reloctype = BFD_RELOC_SH_GOT_LOW16; 2608 else if (opjp->reloctype == BFD_RELOC_SH_GOTPLT32) 2609 opjp->reloctype = BFD_RELOC_SH_GOTPLT_LOW16; 2610 2611 if ((opjp->reloctype == BFD_RELOC_NONE 2612 || opjp->reloctype == BFD_RELOC_32_GOTOFF 2613 || opjp->reloctype == BFD_RELOC_32_PLT_PCREL 2614 || opjp->reloctype == BFD_RELOC_SH_GOTPC) 2615 && opcode->opcode_base == SHMEDIA_MOVI_OPC 2616 && (opjp->immediate.X_op != O_constant 2617 || opjp->immediate.X_add_number < -32768 2618 || opjp->immediate.X_add_number > 32767) 2619 && (sh64_expand 2620 || opjp->reloctype == BFD_RELOC_32_GOTOFF 2621 || opjp->reloctype == BFD_RELOC_32_PLT_PCREL 2622 || opjp->reloctype == BFD_RELOC_SH_GOTPC)) 2623 { 2624 int what = sh64_abi == sh64_abi_64 ? MOVI_IMM_64 : MOVI_IMM_32; 2625 offsetT max = sh64_abi == sh64_abi_64 ? MOVI_64 : MOVI_32; 2626 offsetT min = MOVI_16; 2627 offsetT init = UNDEF_MOVI; 2628 valueT addvalue 2629 = opjp->immediate.X_op_symbol != NULL 2630 ? 0 : opjp->immediate.X_add_number; 2631 symbolS *sym 2632 = opjp->immediate.X_op_symbol != NULL 2633 ? make_expr_symbol (&opjp->immediate) 2634 : opjp->immediate.X_add_symbol; 2635 2636 if (opjp->reloctype == BFD_RELOC_32_GOTOFF) 2637 init = max = min = MOVI_GOTOFF; 2638 else if (opjp->reloctype == BFD_RELOC_32_PLT_PCREL) 2639 { 2640 init = max = min = MOVI_PLT; 2641 what = (sh64_abi == sh64_abi_64 2642 ? MOVI_IMM_64_PCREL 2643 : MOVI_IMM_32_PCREL); 2644 } 2645 else if (opjp->reloctype == BFD_RELOC_SH_GOTPC) 2646 { 2647 init = max = min = MOVI_GOTPC; 2648 what = (sh64_abi == sh64_abi_64 2649 ? MOVI_IMM_64_PCREL 2650 : MOVI_IMM_32_PCREL); 2651 } 2652 2653 frag_var (rs_machine_dependent, 2654 md_relax_table[C (what, max)].rlx_length, 2655 md_relax_table[C (what, min)].rlx_length, 2656 C (what, init), sym, addvalue, insn_loc); 2657 } 2658 else 2659 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2660 (opjp->reloctype 2661 == BFD_RELOC_NONE) 2662 ? BFD_RELOC_SH_IMMS16 2663 : opjp->reloctype); 2664 j++; 2665 break; 2666 2667 case A_PCIMMS16BY4: 2668 { 2669 int what 2670 = ((sh64_abi == sh64_abi_64 && ! sh64_pt32) 2671 ? SH64PCREL16_64 : SH64PCREL16_32); 2672 offsetT max 2673 = ((sh64_abi == sh64_abi_64 && ! sh64_pt32) 2674 ? SH64PCREL64 : SH64PCREL32); 2675 offsetT min = SH64PCREL16; 2676 offsetT init = UNDEF_SH64PCREL; 2677 2678 /* Don't allow complex expressions here. */ 2679 if (opjp->immediate.X_op_symbol != NULL) 2680 { 2681 as_bad(_("invalid operand: expression in PT target")); 2682 return 0; 2683 } 2684 2685 if (opjp->reloctype == BFD_RELOC_32_PLT_PCREL) 2686 init = max = min = SH64PCRELPLT; 2687 2688 /* If we're not expanding, then just emit a fixup. */ 2689 if (sh64_expand || opjp->reloctype != BFD_RELOC_NONE) 2690 frag_var (rs_machine_dependent, 2691 md_relax_table[C (what, max)].rlx_length, 2692 md_relax_table[C (what, min)].rlx_length, 2693 C (what, init), 2694 opjp->immediate.X_add_symbol, 2695 opjp->immediate.X_add_number, 2696 insn_loc); 2697 else 2698 insn |= shmedia_immediate_op (insn_loc, opjp, 1, 2699 opjp->reloctype == BFD_RELOC_NONE 2700 ? BFD_RELOC_SH_PT_16 2701 : opjp->reloctype); 2702 2703 j++; 2704 break; 2705 } 2706 2707 case A_PCIMMS16BY4_PT: 2708 { 2709 int what 2710 = ((sh64_abi == sh64_abi_64 && ! sh64_pt32) 2711 ? SH64PCREL16PT_64 : SH64PCREL16PT_32); 2712 offsetT max 2713 = ((sh64_abi == sh64_abi_64 && ! sh64_pt32) 2714 ? SH64PCREL64 : SH64PCREL32); 2715 offsetT min = SH64PCREL16; 2716 offsetT init = UNDEF_SH64PCREL; 2717 2718 /* Don't allow complex expressions here. */ 2719 if (opjp->immediate.X_op_symbol != NULL) 2720 { 2721 as_bad(_("invalid operand: expression in PT target")); 2722 return 0; 2723 } 2724 2725 if (opjp->reloctype == BFD_RELOC_32_PLT_PCREL) 2726 init = max = min = SH64PCRELPLT; 2727 2728 /* If we're not expanding, then just emit a fixup. */ 2729 if (sh64_expand || opjp->reloctype != BFD_RELOC_NONE) 2730 frag_var (rs_machine_dependent, 2731 md_relax_table[C (what, max)].rlx_length, 2732 md_relax_table[C (what, min)].rlx_length, 2733 C (what, init), 2734 opjp->immediate.X_add_symbol, 2735 opjp->immediate.X_add_number, 2736 insn_loc); 2737 else 2738 /* This reloc-type is just temporary, so we can distinguish 2739 PTA from PT. It is changed in shmedia_md_apply_fix to 2740 BFD_RELOC_SH_PT_16. */ 2741 insn |= shmedia_immediate_op (insn_loc, opjp, 1, 2742 opjp->reloctype == BFD_RELOC_NONE 2743 ? SHMEDIA_BFD_RELOC_PT 2744 : opjp->reloctype); 2745 2746 j++; 2747 break; 2748 } 2749 2750 case A_IMMU5: 2751 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2752 BFD_RELOC_SH_IMMU5); 2753 j++; 2754 break; 2755 2756 case A_IMMU6: 2757 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2758 BFD_RELOC_SH_IMMU6); 2759 j++; 2760 break; 2761 2762 case A_IMMU16: 2763 insn |= shmedia_immediate_op (insn_loc, opjp, 0, 2764 (opjp->reloctype 2765 == BFD_RELOC_NONE) 2766 ? BFD_RELOC_SH_IMMU16 2767 : opjp->reloctype); 2768 j++; 2769 break; 2770 2771 default: 2772 BAD_CASE (argtype); 2773 } 2774 } 2775 2776 md_number_to_chars (insn_loc, insn, 4); 2777 return 4; 2778 } 2779 2780 /* Assemble a SHmedia instruction. */ 2781 2782 static void 2783 shmedia_md_assemble (char *str) 2784 { 2785 char *op_end; 2786 shmedia_opcode_info *opcode; 2787 shmedia_operands_info operands; 2788 int size; 2789 2790 opcode = shmedia_find_cooked_opcode (&str); 2791 op_end = str; 2792 2793 if (opcode == NULL) 2794 { 2795 as_bad (_("unknown opcode")); 2796 return; 2797 } 2798 2799 /* Start a SHmedia code region, if there has been pseudoinsns or similar 2800 seen since the last one. */ 2801 if (!seen_insn) 2802 { 2803 sh64_update_contents_mark (TRUE); 2804 sh64_set_contents_type (CRT_SH5_ISA32); 2805 seen_insn = TRUE; 2806 } 2807 2808 op_end = shmedia_get_operands (opcode, op_end, &operands); 2809 2810 if (op_end == NULL) 2811 { 2812 as_bad (_("invalid operands to %s"), opcode->name); 2813 return; 2814 } 2815 2816 if (*op_end) 2817 { 2818 as_bad (_("excess operands to %s"), opcode->name); 2819 return; 2820 } 2821 2822 size = shmedia_build_Mytes (opcode, &operands); 2823 if (size == 0) 2824 return; 2825 } 2826 2827 /* Hook called from md_begin in tc-sh.c. */ 2828 2829 void 2830 shmedia_md_begin (void) 2831 { 2832 const shmedia_opcode_info *shmedia_opcode; 2833 shmedia_opcode_hash_control = hash_new (); 2834 2835 /* Create opcode table for SHmedia mnemonics. */ 2836 for (shmedia_opcode = shmedia_table; 2837 shmedia_opcode->name; 2838 shmedia_opcode++) 2839 hash_insert (shmedia_opcode_hash_control, shmedia_opcode->name, 2840 (char *) shmedia_opcode); 2841 } 2842 2843 /* Switch instruction set. Only valid if one of the --isa or --abi 2844 options was specified. */ 2845 2846 static void 2847 s_sh64_mode (int ignore ATTRIBUTE_UNUSED) 2848 { 2849 char *name = input_line_pointer, ch; 2850 2851 /* Make sure data up to this location is handled according to the 2852 previous ISA. */ 2853 sh64_update_contents_mark (TRUE); 2854 2855 while (!is_end_of_line[(unsigned char) *input_line_pointer]) 2856 input_line_pointer++; 2857 ch = *input_line_pointer; 2858 *input_line_pointer = '\0'; 2859 2860 /* If the mode was not set before, explicitly or implicitly, then we're 2861 not emitting SH64 code, so this pseudo is invalid. */ 2862 if (sh64_isa_mode == sh64_isa_unspecified) 2863 as_bad (_("The `.mode %s' directive is not valid with this architecture"), 2864 name); 2865 2866 if (strcasecmp (name, "shcompact") == 0) 2867 sh64_isa_mode = sh64_isa_shcompact; 2868 else if (strcasecmp (name, "shmedia") == 0) 2869 sh64_isa_mode = sh64_isa_shmedia; 2870 else 2871 as_bad (_("Invalid argument to .mode: %s"), name); 2872 2873 /* Make a new frag, marking it with the supposedly-changed ISA. */ 2874 frag_wane (frag_now); 2875 frag_new (0); 2876 2877 /* Contents type up to this new point is the same as before; don't add a 2878 data region just because the new frag we created. */ 2879 sh64_update_contents_mark (FALSE); 2880 2881 *input_line_pointer = ch; 2882 demand_empty_rest_of_line (); 2883 } 2884 2885 /* Check that the right ABI is used. Only valid if one of the --isa or 2886 --abi options was specified. */ 2887 2888 static void 2889 s_sh64_abi (int ignore ATTRIBUTE_UNUSED) 2890 { 2891 char *name = input_line_pointer, ch; 2892 2893 while (!is_end_of_line[(unsigned char) *input_line_pointer]) 2894 input_line_pointer++; 2895 ch = *input_line_pointer; 2896 *input_line_pointer = '\0'; 2897 2898 /* If the mode was not set before, explicitly or implicitly, then we're 2899 not emitting SH64 code, so this pseudo is invalid. */ 2900 if (sh64_abi == sh64_abi_unspecified) 2901 as_bad (_("The `.abi %s' directive is not valid with this architecture"), 2902 name); 2903 2904 if (strcmp (name, "64") == 0) 2905 { 2906 if (sh64_abi != sh64_abi_64) 2907 as_bad (_("`.abi 64' but command-line options do not specify 64-bit ABI")); 2908 } 2909 else if (strcmp (name, "32") == 0) 2910 { 2911 if (sh64_abi != sh64_abi_32) 2912 as_bad (_("`.abi 32' but command-line options do not specify 32-bit ABI")); 2913 } 2914 else 2915 as_bad (_("Invalid argument to .abi: %s"), name); 2916 2917 *input_line_pointer = ch; 2918 demand_empty_rest_of_line (); 2919 } 2920 2921 /* This function is the first target-specific function called after 2922 parsing command-line options. Therefore we set default values from 2923 command-line options here and do some sanity checking we couldn't do 2924 when options were being parsed. */ 2925 2926 const char * 2927 sh64_target_format (void) 2928 { 2929 #ifdef TE_NetBSD 2930 /* For NetBSD, if the ISA is unspecified, always use SHmedia. */ 2931 if (preset_target_arch == 0 && sh64_isa_mode == sh64_isa_unspecified) 2932 sh64_isa_mode = sh64_isa_shmedia; 2933 2934 /* If the ABI is unspecified, select a default: based on how 2935 we were configured: sh64 == sh64_abi_64, else sh64_abi_32. */ 2936 if (sh64_abi == sh64_abi_unspecified) 2937 { 2938 if (preset_target_arch != 0 || sh64_isa_mode == sh64_isa_shcompact) 2939 sh64_abi = sh64_abi_32; 2940 else if (strncmp (TARGET_CPU, "sh64", 4) == 0) 2941 sh64_abi = sh64_abi_64; 2942 else 2943 sh64_abi = sh64_abi_32; 2944 } 2945 #endif 2946 2947 #ifdef TE_LINUX 2948 if (preset_target_arch == 0 && sh64_isa_mode == sh64_isa_unspecified) 2949 sh64_isa_mode = sh64_isa_shmedia; 2950 2951 if (sh64_abi == sh64_abi_unspecified) 2952 sh64_abi = sh64_abi_32; 2953 #endif 2954 2955 if (sh64_abi == sh64_abi_64 && sh64_isa_mode == sh64_isa_unspecified) 2956 sh64_isa_mode = sh64_isa_shmedia; 2957 2958 if (sh64_abi == sh64_abi_32 && sh64_isa_mode == sh64_isa_unspecified) 2959 sh64_isa_mode = sh64_isa_shcompact; 2960 2961 if (sh64_isa_mode == sh64_isa_shcompact 2962 && sh64_abi == sh64_abi_unspecified) 2963 sh64_abi = sh64_abi_32; 2964 2965 if (sh64_isa_mode == sh64_isa_shmedia 2966 && sh64_abi == sh64_abi_unspecified) 2967 sh64_abi = sh64_abi_64; 2968 2969 if (sh64_isa_mode == sh64_isa_unspecified && ! sh64_mix) 2970 as_bad (_("-no-mix is invalid without specifying SHcompact or SHmedia")); 2971 2972 if ((sh64_isa_mode == sh64_isa_unspecified 2973 || sh64_isa_mode == sh64_isa_shmedia) 2974 && sh64_shcompact_const_crange) 2975 as_bad (_("-shcompact-const-crange is invalid without SHcompact")); 2976 2977 if (sh64_pt32 && sh64_abi != sh64_abi_64) 2978 as_bad (_("-expand-pt32 only valid with -abi=64")); 2979 2980 if (! sh64_expand && sh64_isa_mode == sh64_isa_unspecified) 2981 as_bad (_("-no-expand only valid with SHcompact or SHmedia")); 2982 2983 if (sh64_pt32 && ! sh64_expand) 2984 as_bad (_("-expand-pt32 invalid together with -no-expand")); 2985 2986 #ifdef TE_NetBSD 2987 if (sh64_abi == sh64_abi_64) 2988 return (target_big_endian ? "elf64-sh64-nbsd" : "elf64-sh64l-nbsd"); 2989 else 2990 return (target_big_endian ? "elf32-sh64-nbsd" : "elf32-sh64l-nbsd"); 2991 #elif defined (TE_LINUX) 2992 if (sh64_abi == sh64_abi_64) 2993 return (target_big_endian ? "elf64-sh64big-linux" : "elf64-sh64-linux"); 2994 else 2995 return (target_big_endian ? "elf32-sh64big-linux" : "elf32-sh64-linux"); 2996 #else 2997 /* When the ISA is not one of SHmedia or SHcompact, use the old SH 2998 object format. */ 2999 if (sh64_isa_mode == sh64_isa_unspecified) 3000 return (target_big_endian ? "elf32-sh" : "elf32-shl"); 3001 else if (sh64_abi == sh64_abi_64) 3002 return (target_big_endian ? "elf64-sh64" : "elf64-sh64l"); 3003 else 3004 return (target_big_endian ? "elf32-sh64" : "elf32-sh64l"); 3005 #endif 3006 } 3007 3008 /* The worker function of TARGET_MACH. */ 3009 3010 int 3011 sh64_target_mach (void) 3012 { 3013 /* We need to explicitly set bfd_mach_sh5 instead of the default 0. But 3014 we only do this for the 64-bit ABI: if we do it for the 32-bit ABI, 3015 the SH5 info in the bfd_arch_info structure will be selected. 3016 However correct, as the machine has 64-bit addresses, functions 3017 expected to emit 32-bit data for addresses will start failing. For 3018 example, the dwarf2dbg.c functions will emit 64-bit debugging format, 3019 and we don't want that in the 32-bit ABI. 3020 3021 We could have two bfd_arch_info structures for SH64; one for the 3022 32-bit ABI and one for the rest (64-bit ABI). But that would be a 3023 bigger kludge: it's a flaw in the BFD design, and we need to just 3024 work around it by having the default machine set here in the 3025 assembler. For everything else but the assembler, the various bfd 3026 functions will set the machine type right to bfd_mach_sh5 from object 3027 file header flags regardless of the 0 here. */ 3028 3029 return (sh64_abi == sh64_abi_64) ? bfd_mach_sh5 : 0; 3030 } 3031 3032 /* This is MD_PCREL_FROM_SECTION, we we define so it is called instead of 3033 md_pcrel_from (in tc-sh.c). */ 3034 3035 valueT 3036 shmedia_md_pcrel_from_section (struct fix *fixP, segT sec ATTRIBUTE_UNUSED) 3037 { 3038 know (fixP->fx_frag->fr_type == rs_machine_dependent); 3039 3040 /* Use the ISA for the instruction to decide which offset to use. We 3041 can glean it from the fisup type. */ 3042 switch (fixP->fx_r_type) 3043 { 3044 case BFD_RELOC_SH_IMM_LOW16: 3045 case BFD_RELOC_SH_IMM_MEDLOW16: 3046 case BFD_RELOC_SH_IMM_MEDHI16: 3047 case BFD_RELOC_SH_IMM_HI16: 3048 case BFD_RELOC_SH_IMM_LOW16_PCREL: 3049 case BFD_RELOC_SH_IMM_MEDLOW16_PCREL: 3050 case BFD_RELOC_SH_IMM_MEDHI16_PCREL: 3051 case BFD_RELOC_SH_IMM_HI16_PCREL: 3052 case BFD_RELOC_SH_IMMU5: 3053 case BFD_RELOC_SH_IMMU6: 3054 case BFD_RELOC_SH_IMMS6: 3055 case BFD_RELOC_SH_IMMS10: 3056 case BFD_RELOC_SH_IMMS10BY2: 3057 case BFD_RELOC_SH_IMMS10BY4: 3058 case BFD_RELOC_SH_IMMS10BY8: 3059 case BFD_RELOC_SH_IMMS16: 3060 case BFD_RELOC_SH_IMMU16: 3061 case BFD_RELOC_SH_PT_16: 3062 case SHMEDIA_BFD_RELOC_PT: 3063 /* PC-relative relocs are relative to the address of the last generated 3064 instruction, i.e. fx_size - 4. */ 3065 return SHMEDIA_MD_PCREL_FROM_FIX (fixP); 3066 3067 case BFD_RELOC_64: 3068 case BFD_RELOC_64_PCREL: 3069 know (0 /* Shouldn't get here. */); 3070 break; 3071 3072 default: 3073 /* If section was SHcompact, use its function. */ 3074 return (valueT) md_pcrel_from_section (fixP, sec); 3075 } 3076 3077 know (0 /* Shouldn't get here. */); 3078 return 0; 3079 } 3080 3081 /* Create one .cranges descriptor from two symbols, STARTSYM marking begin 3082 and ENDSYM marking end, and CR_TYPE specifying the type. */ 3083 3084 static void 3085 sh64_emit_crange (symbolS *startsym, symbolS *endsym, 3086 enum sh64_elf_cr_type cr_type) 3087 { 3088 expressionS exp; 3089 segT current_seg = now_seg; 3090 subsegT current_subseg = now_subseg; 3091 3092 asection *cranges 3093 = bfd_make_section_old_way (stdoutput, 3094 SH64_CRANGES_SECTION_NAME); 3095 3096 /* Temporarily change to the .cranges section. */ 3097 subseg_set (cranges, 0); 3098 3099 /* Emit the cr_addr part. */ 3100 exp.X_op = O_symbol; 3101 exp.X_add_number = 0; 3102 exp.X_op_symbol = NULL; 3103 exp.X_add_symbol = startsym; 3104 emit_expr (&exp, 4); 3105 3106 /* Emit the cr_size part. */ 3107 exp.X_op = O_subtract; 3108 exp.X_add_number = 0; 3109 exp.X_add_symbol = endsym; 3110 exp.X_op_symbol = startsym; 3111 emit_expr (&exp, 4); 3112 3113 /* Emit the cr_size part. */ 3114 exp.X_op = O_constant; 3115 exp.X_add_number = cr_type; 3116 exp.X_add_symbol = NULL; 3117 exp.X_op_symbol = NULL; 3118 emit_expr (&exp, 2); 3119 3120 /* Now back to our regular program. */ 3121 subseg_set (current_seg, current_subseg); 3122 } 3123 3124 /* Called when the assembler is about to emit contents of some type into 3125 SEG, so it is *known* that the type of that new contents is in 3126 NEW_CONTENTS_TYPE. If just switching back and forth between different 3127 contents types (for example, with consecutive .mode pseudos), then this 3128 function isn't called. */ 3129 3130 static void 3131 sh64_set_contents_type (enum sh64_elf_cr_type new_contents_type) 3132 { 3133 segment_info_type *seginfo; 3134 3135 /* We will not be called when emitting .cranges output, since callers 3136 stop that. Validize that assumption. */ 3137 know (!emitting_crange); 3138 3139 seginfo = seg_info (now_seg); 3140 3141 if (seginfo) 3142 { 3143 symbolS *symp = seginfo->tc_segment_info_data.last_contents_mark; 3144 3145 enum sh64_elf_cr_type contents_type 3146 = seginfo->tc_segment_info_data.contents_type; 3147 3148 /* If it was just SHcompact switching between code and constant 3149 pool, don't change contents type. Just make sure we don't set 3150 the contents type to data, as that would join with a data-region 3151 in SHmedia mode. */ 3152 if (sh64_isa_mode == sh64_isa_shcompact 3153 && ! sh64_shcompact_const_crange) 3154 new_contents_type = CRT_SH5_ISA16; 3155 3156 /* If nothing changed, stop here. */ 3157 if (contents_type == new_contents_type) 3158 return; 3159 3160 /* If we're in 64-bit ABI mode, we do not emit .cranges, as it is 3161 only specified for 32-bit addresses. It could presumably be 3162 extended, but in 64-bit ABI mode we don't have SHcompact code, so 3163 we would only use it to mark code and data. */ 3164 if (sh64_abi == sh64_abi_64) 3165 { 3166 /* Make the code type "sticky". We don't want to set the 3167 sections contents type to data if there's any code in it as 3168 we don't have .cranges in 64-bit mode to notice the 3169 difference. */ 3170 seginfo->tc_segment_info_data.contents_type 3171 = (new_contents_type == CRT_SH5_ISA32 3172 || contents_type == CRT_SH5_ISA32) 3173 ? CRT_SH5_ISA32 : new_contents_type; 3174 return; 3175 } 3176 3177 /* If none was marked, create a start symbol for this range and 3178 perhaps as a closing symbol for the old one. */ 3179 if (symp == NULL) 3180 symp = symbol_new (FAKE_LABEL_NAME, now_seg, (valueT) frag_now_fix (), 3181 frag_now); 3182 3183 /* We will use this symbol, so don't leave a pointer behind. */ 3184 seginfo->tc_segment_info_data.last_contents_mark = NULL; 3185 3186 /* We'll be making only datalabel references to it, if we emit a 3187 .cranges descriptor, so remove any code flag. */ 3188 S_SET_OTHER (symp, S_GET_OTHER (symp) & ~STO_SH5_ISA32); 3189 3190 /* If we have already marked the start of a range, we need to close 3191 and emit it before marking a new one, so emit a new .cranges 3192 descriptor into the .cranges section. */ 3193 if (seginfo->tc_segment_info_data.mode_start_symbol) 3194 { 3195 /* If we're not supposed to emit mixed-mode sections, make it an 3196 error, but continue processing. */ 3197 if (! sh64_mix 3198 && (new_contents_type == CRT_SH5_ISA32 3199 || contents_type == CRT_SH5_ISA32)) 3200 as_bad ( 3201 _("SHmedia code not allowed in same section as constants and SHcompact code")); 3202 3203 emitting_crange = TRUE; 3204 sh64_emit_crange (seginfo->tc_segment_info_data.mode_start_symbol, 3205 symp, contents_type); 3206 emitting_crange = FALSE; 3207 seginfo->tc_segment_info_data.emitted_ranges++; 3208 } 3209 3210 seginfo->tc_segment_info_data.mode_start_symbol = symp; 3211 seginfo->tc_segment_info_data.mode_start_subseg = now_subseg; 3212 seginfo->tc_segment_info_data.contents_type = new_contents_type; 3213 3214 /* Always reset this, so the SHcompact code will emit a reloc when 3215 it prepares to relax. */ 3216 seginfo->tc_segment_info_data.in_code = 0; 3217 } 3218 else 3219 as_bad (_("No segment info for current section")); 3220 } 3221 3222 /* Hook when defining symbols and labels. We set the ST_OTHER field if 3223 the symbol is "shmedia" (with "bitor 1" automatically applied). Simple 3224 semantics for a label being "shmedia" : It was defined when .mode 3225 SHmedia was in effect, and it was defined in a code section. It 3226 doesn't matter whether or not an assembled opcode is nearby. */ 3227 3228 void 3229 sh64_frob_label (symbolS *symp) 3230 { 3231 segT seg = S_GET_SEGMENT (symp); 3232 static const symbolS *null = NULL; 3233 3234 /* Reset the tc marker for all newly created symbols. */ 3235 symbol_set_tc (symp, (symbolS **) &null); 3236 3237 if (seg != NULL && sh64_isa_mode == sh64_isa_shmedia && subseg_text_p (seg)) 3238 S_SET_OTHER (symp, S_GET_OTHER (symp) | STO_SH5_ISA32); 3239 } 3240 3241 /* Handle the "datalabel" qualifier. We need to call "operand", but it's 3242 static, so a function pointer is passed here instead. FIXME: A target 3243 hook for qualifiers is needed; we currently use the md_parse_name 3244 symbol hook. */ 3245 3246 int 3247 sh64_consume_datalabel (const char *name, expressionS *exp, 3248 enum expr_mode mode, char *cp, 3249 segT (*operandf) (expressionS *, enum expr_mode)) 3250 { 3251 static int parsing_datalabel = 0; 3252 3253 if (strcasecmp (name, "datalabel") == 0) 3254 { 3255 int save_parsing_datalabel = parsing_datalabel; 3256 3257 if (parsing_datalabel) 3258 as_bad (_("duplicate datalabel operator ignored")); 3259 3260 *input_line_pointer = *cp; 3261 parsing_datalabel = 1; 3262 (*operandf) (exp, expr_normal); 3263 parsing_datalabel = save_parsing_datalabel; 3264 3265 if (exp->X_op == O_symbol || exp->X_op == O_PIC_reloc) 3266 { 3267 symbolS *symp = exp->X_add_symbol; 3268 segT symseg = S_GET_SEGMENT (symp); 3269 3270 /* If the symbol is defined to something that is already a 3271 datalabel, we don't need to bother with any special handling. */ 3272 if (symseg != undefined_section 3273 && S_GET_OTHER (symp) != STO_SH5_ISA32) 3274 /* Do nothing. */ 3275 ; 3276 else 3277 { 3278 symbolS *dl_symp; 3279 const char *name = S_GET_NAME (symp); 3280 char *dl_name 3281 = xmalloc (strlen (name) + sizeof (DATALABEL_SUFFIX)); 3282 3283 /* Now we copy the datalabel-qualified symbol into a symbol 3284 with the same name, but with " DL" appended. We mark the 3285 symbol using the TC_SYMFIELD_TYPE field with a pointer to 3286 the main symbol, so we don't have to inspect all symbol 3287 names. Note that use of "datalabel" is not expected to 3288 be a common case. */ 3289 strcpy (dl_name, name); 3290 strcat (dl_name, DATALABEL_SUFFIX); 3291 3292 /* A FAKE_LABEL_NAME marks "$" or ".". There can be any 3293 number of them and all have the same (faked) name; we 3294 must make a new one each time. */ 3295 if (strcmp (name, FAKE_LABEL_NAME) == 0) 3296 dl_symp = symbol_make (dl_name); 3297 else 3298 dl_symp = symbol_find_or_make (dl_name); 3299 3300 free (dl_name); 3301 symbol_set_value_expression (dl_symp, 3302 symbol_get_value_expression (symp)); 3303 S_SET_SEGMENT (dl_symp, symseg); 3304 symbol_set_frag (dl_symp, symbol_get_frag (symp)); 3305 symbol_set_tc (dl_symp, &symp); 3306 copy_symbol_attributes (dl_symp, symp); 3307 exp->X_add_symbol = dl_symp; 3308 3309 /* Unset the BranchTarget mark that can be set at symbol 3310 creation or attributes copying. */ 3311 S_SET_OTHER (dl_symp, S_GET_OTHER (dl_symp) & ~STO_SH5_ISA32); 3312 3313 /* The GLOBAL and WEAK attributes are not copied over by 3314 copy_symbol_attributes. Do it here. */ 3315 if (S_IS_WEAK (symp)) 3316 S_SET_WEAK (dl_symp); 3317 else if (S_IS_EXTERNAL (symp)) 3318 S_SET_EXTERNAL (dl_symp); 3319 } 3320 } 3321 /* Complain about other types of operands than symbol, unless they 3322 have already been complained about. A constant is always a 3323 datalabel. Removing the low bit would therefore be wrong. 3324 Complaining about it would also be wrong. */ 3325 else if (exp->X_op != O_illegal 3326 && exp->X_op != O_absent 3327 && exp->X_op != O_constant) 3328 as_bad (_("Invalid DataLabel expression")); 3329 3330 *cp = *input_line_pointer; 3331 3332 return 1; 3333 } 3334 3335 return sh_parse_name (name, exp, mode, cp); 3336 } 3337 3338 /* This function is called just before symbols are being output. It 3339 returns zero when a symbol must be output, non-zero otherwise. 3340 Datalabel references that were fully resolved to local symbols are not 3341 necessary to output. We also do not want to output undefined symbols 3342 that are not used in relocs. For symbols that are used in a reloc, it 3343 does not matter what we set here. If it is *not* used in a reloc, then 3344 it was probably the datalabel counterpart that was used in a reloc; 3345 then we need not output the main symbol. */ 3346 3347 int 3348 sh64_exclude_symbol (symbolS *symp) 3349 { 3350 symbolS *main_symbol = *symbol_get_tc (symp); 3351 3352 return main_symbol != NULL || ! S_IS_DEFINED (symp); 3353 } 3354 3355 /* If we haven't seen an insn since the last update, and location 3356 indicators have moved (a new frag, new location within frag) we have 3357 emitted data, so change contents type to data. Forget that we have 3358 seen a sequence of insns and store the current location so we can mark 3359 a new region if needed. */ 3360 3361 static void 3362 sh64_update_contents_mark (bfd_boolean update_type) 3363 { 3364 segment_info_type *seginfo; 3365 seginfo = seg_info (now_seg); 3366 3367 if (seginfo != NULL) 3368 { 3369 symbolS *symp = seginfo->tc_segment_info_data.last_contents_mark; 3370 3371 if (symp == NULL) 3372 { 3373 symp = symbol_new (FAKE_LABEL_NAME, now_seg, 3374 (valueT) frag_now_fix (), frag_now); 3375 seginfo->tc_segment_info_data.last_contents_mark = symp; 3376 } 3377 else 3378 { 3379 /* If we have moved location since last flush, we need to emit a 3380 data range. The previous contents type ended at the location 3381 of the last update. */ 3382 if ((S_GET_VALUE (symp) != frag_now_fix () 3383 || symbol_get_frag (symp) != frag_now)) 3384 { 3385 enum sh64_elf_cr_type contents_type 3386 = seginfo->tc_segment_info_data.contents_type; 3387 3388 if (update_type 3389 && contents_type != CRT_DATA 3390 && contents_type != CRT_NONE 3391 && ! seen_insn) 3392 { 3393 sh64_set_contents_type (CRT_DATA); 3394 symp = seginfo->tc_segment_info_data.last_contents_mark; 3395 } 3396 3397 /* If the symbol wasn't used up to make up a new range 3398 descriptor, update it to this new location. */ 3399 if (symp) 3400 { 3401 S_SET_VALUE (symp, (valueT) frag_now_fix ()); 3402 symbol_set_frag (symp, frag_now); 3403 } 3404 } 3405 } 3406 } 3407 3408 seen_insn = FALSE; 3409 } 3410 3411 /* Called when the assembler is about to output some data, or maybe it's 3412 just switching segments. */ 3413 3414 void 3415 sh64_flush_pending_output (void) 3416 { 3417 sh64_update_contents_mark (TRUE); 3418 sh_flush_pending_output (); 3419 } 3420 3421 /* Flush out the last crange descriptor after all insns have been emitted. */ 3422 3423 static void 3424 sh64_flush_last_crange (bfd *abfd ATTRIBUTE_UNUSED, asection *seg, 3425 void *countparg ATTRIBUTE_UNUSED) 3426 { 3427 segment_info_type *seginfo; 3428 3429 seginfo = seg_info (seg); 3430 3431 if (seginfo 3432 /* Only emit .cranges descriptors if we would make it more than one. */ 3433 && seginfo->tc_segment_info_data.emitted_ranges != 0) 3434 { 3435 symbolS *symp; 3436 3437 /* We need a closing symbol, so switch to the indicated section and 3438 emit it. */ 3439 3440 /* Change to the section we're about to handle. */ 3441 subseg_set (seg, seginfo->tc_segment_info_data.mode_start_subseg); 3442 3443 symp = symbol_new (FAKE_LABEL_NAME, now_seg, (valueT) frag_now_fix (), 3444 frag_now); 3445 3446 /* We'll be making a datalabel reference to it, so remove any code 3447 flag. */ 3448 S_SET_OTHER (symp, S_GET_OTHER (symp) & ~STO_SH5_ISA32); 3449 3450 sh64_emit_crange (seginfo->tc_segment_info_data.mode_start_symbol, 3451 symp, 3452 seginfo->tc_segment_info_data.contents_type); 3453 } 3454 } 3455 3456 /* If and only if we see a call to md_number_to_chars without flagging the 3457 start of an insn, we set the contents type to CRT_DATA, and only when 3458 in SHmedia mode. Note that by default we don't bother changing when 3459 going from SHcompact to data, as the constant pools in GCC-generated 3460 SHcompact code would create an inordinate amount of .cranges 3461 descriptors. */ 3462 3463 static void 3464 sh64_flag_output (void) 3465 { 3466 if (sh64_isa_mode != sh64_isa_unspecified 3467 && !seen_insn 3468 && !sh64_end_of_assembly 3469 && !emitting_crange) 3470 { 3471 md_flush_pending_output (); 3472 sh64_set_contents_type (CRT_DATA); 3473 } 3474 } 3475 3476 /* Vtables don't need "datalabel" but we allow it by simply deleting 3477 any we find. */ 3478 3479 static char * 3480 strip_datalabels (void) 3481 { 3482 char *src, *dest, *start=input_line_pointer; 3483 3484 for (src=input_line_pointer, dest=input_line_pointer; *src != '\n'; ) 3485 { 3486 if (strncasecmp (src, "datalabel", 9) == 0 3487 && ISSPACE (src[9]) 3488 && (src == start || !(ISALNUM (src[-1])) || src[-1] == '_')) 3489 src += 10; 3490 else 3491 *dest++ = *src++; 3492 } 3493 3494 if (dest < src) 3495 *dest = '\n'; 3496 return src + 1; 3497 } 3498 3499 static void 3500 sh64_vtable_entry (int ignore ATTRIBUTE_UNUSED) 3501 { 3502 char *eol = strip_datalabels (); 3503 3504 obj_elf_vtable_entry (0); 3505 input_line_pointer = eol; 3506 } 3507 3508 static void 3509 sh64_vtable_inherit (int ignore ATTRIBUTE_UNUSED) 3510 { 3511 char *eol = strip_datalabels (); 3512 3513 obj_elf_vtable_inherit (0); 3514 input_line_pointer = eol; 3515 } 3516 3517 int 3518 sh64_fake_label (const char *name) 3519 { 3520 size_t len; 3521 3522 if (strcmp (name, FAKE_LABEL_NAME) == 0) 3523 return 1; 3524 3525 len = strlen (name); 3526 if (len >= (sizeof (DATALABEL_SUFFIX) - 1)) 3527 return strcmp (&name [len - sizeof (DATALABEL_SUFFIX) + 1], 3528 DATALABEL_SUFFIX) == 0; 3529 3530 return 0; 3531 } 3532