1# This variant of elf.sc is used for ARM BPABI platforms, like Symbian
2# OS, where a separate postlinker will operated on the generated
3# executable or shared object.  See elf.sc for configuration variables
4# that apply; only BPABI-specific variables will be noted here.
5
6test -z "$ENTRY" && ENTRY=_start
7test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
8test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
9if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
10test -z "${ELFSIZE}" && ELFSIZE=32
11test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
12test "$LD_FLAG" = "N" && DATA_ADDR=.
13test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
14test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
15test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
16DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
17DATA_SEGMENT_RELRO_END=""
18DATA_SEGMENT_RELRO_GOTPLT_END=""
19DATA_SEGMENT_END=""
20if test -n "${COMMONPAGESIZE}"; then
21  DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
22  DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
23  if test -n "${SEPARATE_GOTPLT}"; then
24    DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (. + ${SEPARATE_GOTPLT});"
25  else
26    DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (.);"
27  fi
28fi
29INTERP=".interp       0 : { *(.interp) }"
30PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
31RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
32DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }"
33STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
34if test -z "${NO_SMALL_DATA}"; then
35  SBSS=".sbss         ${RELOCATING-0} :
36  {
37    ${RELOCATING+PROVIDE (__sbss_start = .);}
38    ${RELOCATING+PROVIDE (___sbss_start = .);}
39    *(.dynsbss)
40    *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
41    *(.scommon)
42    ${RELOCATING+PROVIDE (__sbss_end = .);}
43    ${RELOCATING+PROVIDE (___sbss_end = .);}
44  }"
45  SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
46  SDATA="/* We want the small data sections together, so single-instruction offsets
47     can access them all, and initialized data all before uninitialized, so
48     we can shorten the on-disk segment size.  */
49  .sdata        ${RELOCATING-0} :
50  {
51    ${RELOCATING+${SDATA_START_SYMBOLS}}
52    *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
53  }"
54  SDATA2=".sdata2       ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
55  REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
56  .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
57  REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
58  .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
59  REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
60  .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
61  REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
62  .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
63else
64  NO_SMALL_DATA=" "
65fi
66test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
67CTOR=".ctors        ${CONSTRUCTING-0} :
68  {
69    ${CONSTRUCTING+${CTOR_START}}
70    /* gcc uses crtbegin.o to find the start of
71       the constructors, so we make sure it is
72       first.  Because this is a wildcard, it
73       doesn't matter if the user does not
74       actually link against crtbegin.o; the
75       linker won't look for a file to match a
76       wildcard.  The wildcard also means that it
77       doesn't matter which directory crtbegin.o
78       is in.  */
79
80    KEEP (*crtbegin*.o(.ctors))
81
82    /* We don't want to include the .ctor section from
83       the crtend.o file until after the sorted ctors.
84       The .ctor section from the crtend file contains the
85       end of ctors marker and it must be last */
86
87    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
88    KEEP (*(SORT(.ctors.*)))
89    KEEP (*(.ctors))
90    ${CONSTRUCTING+${CTOR_END}}
91  }"
92DTOR=".dtors        ${CONSTRUCTING-0} :
93  {
94    ${CONSTRUCTING+${DTOR_START}}
95    KEEP (*crtbegin*.o(.dtors))
96    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
97    KEEP (*(SORT(.dtors.*)))
98    KEEP (*(.dtors))
99    ${CONSTRUCTING+${DTOR_END}}
100  }"
101STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
102  {
103    ${RELOCATING+_stack = .;}
104    *(.stack)
105  }"
106
107TEXT_START_ADDR="SEGMENT_START(\"text\", ${TEXT_START_ADDR})"
108SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text\", ${SHLIB_TEXT_START_ADDR:-0})"
109DATA_ADDR="SEGMENT_START(\"data\", ${DATA_ADDR-${DATA_SEGMENT_ALIGN}})"
110SHLIB_DATA_ADDR="SEGMENT_START(\"data\", ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}})"
111
112# if this is for an embedded system, don't add SIZEOF_HEADERS.
113if [ -z "$EMBEDDED" ]; then
114   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
115   SHLIB_BASE_ADDRESS="${SHLIB_TEXT_START_ADDR} + SIZEOF_HEADERS"
116else
117   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
118   SHLIB_BASE_ADDRESS="${SHLIB_TEXT_START_ADDR}"
119fi
120
121cat <<EOF
122OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
123	      "${LITTLE_OUTPUT_FORMAT}")
124OUTPUT_ARCH(${OUTPUT_ARCH})
125ENTRY(${ENTRY})
126
127${RELOCATING+${LIB_SEARCH_DIRS}}
128${RELOCATING+/* Do we need any of these for elf?
129   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
130${RELOCATING+${EXECUTABLE_SYMBOLS}}
131${RELOCATING+${INPUT_FILES}}
132${RELOCATING- /* For some reason, the Solaris linker makes bad executables
133  if gld -r is used and the intermediate file has sections starting
134  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
135  bug.  But for now assigning the zero vmas works.  */}
136
137/* ARM's proprietary toolchain generate these symbols to match the start
138   and end of particular sections of the image.  SymbianOS uses these
139   symbols.  We provide them for compatibility with ARM's toolchains.
140   These symbols should be bound locally; each shared object may define
141   its own version of these symbols.  */
142
143VERSION
144{
145  /* Give these a dummy version to work around linker lameness.
146     The name used shouldn't matter as these are all local symbols.  */
147  __GNU {
148    local:
149      Image\$\$ER_RO\$\$Base;
150      Image\$\$ER_RO\$\$Limit;
151      SHT\$\$INIT_ARRAY\$\$Base;
152      SHT\$\$INIT_ARRAY\$\$Limit;
153      .ARM.exidx\$\$Base;
154      .ARM.exidx\$\$Limit;
155  };
156}
157
158SECTIONS
159{
160  /* Read-only sections, merged into text segment: */
161  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR});}}}
162
163  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+ . = ${TEXT_BASE_ADDRESS};}}}
164  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}}
165  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}}
166
167  /* Define Image\$\$ER_RO\$\$Base.  */
168  ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Base = .);}
169
170  ${INITIAL_READONLY_SECTIONS}
171
172EOF
173cat <<EOF
174  .init         ${RELOCATING-0} :
175  {
176    ${RELOCATING+${INIT_START}}
177    KEEP (*(.init))
178    ${RELOCATING+${INIT_END}}
179  } =${NOP-0}
180  .text         ${RELOCATING-0} :
181  {
182    ${RELOCATING+${TEXT_START_SYMBOLS}}
183    *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
184    KEEP (*(.text.*personality*))
185    /* .gnu.warning sections are handled specially by elf32.em.  */
186    *(.gnu.warning)
187    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
188  } =${NOP-0}
189  .fini         ${RELOCATING-0} :
190  {
191    ${RELOCATING+${FINI_START}}
192    KEEP (*(.fini))
193    ${RELOCATING+${FINI_END}}
194  } =${NOP-0}
195  /* The SymbianOS kernel requires that the PLT go at the end of the
196     text section.  */
197  ${DATA_PLT-${BSS_PLT-${PLT}}}
198  ${RELOCATING+PROVIDE (__etext = .);}
199  ${RELOCATING+PROVIDE (_etext = .);}
200  ${RELOCATING+PROVIDE (etext = .);}
201
202  /* Define Image\$\$ER_RO\$\$Limit.  */
203  ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Limit = .);}
204
205  ${WRITABLE_RODATA-${RODATA}}
206  .rodata1      ${RELOCATING-0} : { *(.rodata1) }
207  ${CREATE_SHLIB-${SDATA2}}
208  ${CREATE_SHLIB-${SBSS2}}
209
210  /* On SymbianOS, put  .init_array and friends in the read-only
211     segment; there is no runtime relocation applied to these
212     arrays.  */
213
214  .preinit_array   ${RELOCATING-0} :
215  {
216    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
217    KEEP (*(.preinit_array))
218    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
219  }
220  .init_array   ${RELOCATING-0} :
221  {
222    /* SymbianOS uses this symbol.  */
223    ${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Base = .);}
224    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}}
225    KEEP (*(SORT(.init_array.*)))
226    KEEP (*(.init_array))
227    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}}
228    /* SymbianOS uses this symbol.  */
229    ${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Limit = .);}
230  }
231  .fini_array   ${RELOCATING-0} :
232  {
233    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
234    KEEP (*(.fini_array))
235    KEEP (*(SORT(.fini_array.*)))
236    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}}
237  }
238
239  ${OTHER_READONLY_SECTIONS}
240  .eh_frame_hdr : { *(.eh_frame_hdr) }
241  .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
242  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
243
244  /* Adjust the address for the data segment.  We want to adjust up to
245     the same address within the page on the next page up.  */
246  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR};}}}
247  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR};}}
248  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR};}}
249
250  /* Exception handling  */
251  .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
252  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
253
254  /* Thread Local Storage sections  */
255  .tdata	${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
256  .tbss		${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
257
258  ${RELOCATING+${CTOR}}
259  ${RELOCATING+${DTOR}}
260  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
261
262  ${RELOCATING+${DATARELRO}}
263  ${OTHER_RELRO_SECTIONS}
264  ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
265
266  ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
267
268  .data         ${RELOCATING-0} :
269  {
270    ${RELOCATING+${DATA_START_SYMBOLS}}
271    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
272    KEEP (*(.gnu.linkonce.d.*personality*))
273    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
274  }
275  .data1        ${RELOCATING-0} : { *(.data1) }
276  ${WRITABLE_RODATA+${RODATA}}
277  ${OTHER_READWRITE_SECTIONS}
278  ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
279  ${CREATE_SHLIB+${SDATA2}}
280  ${CREATE_SHLIB+${SBSS2}}
281  ${SDATA}
282  ${OTHER_SDATA_SECTIONS}
283  ${RELOCATING+_edata = .;}
284  ${RELOCATING+PROVIDE (edata = .);}
285  ${RELOCATING+. = DEFINED(__bss_segment_start) ? __bss_segment_start : .;}
286  ${RELOCATING+__bss_start = .;}
287  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
288  ${SBSS}
289  ${BSS_PLT+${PLT}}
290  .bss          ${RELOCATING-0} :
291  {
292   *(.dynbss)
293   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
294   *(COMMON)
295   /* Align here to ensure that the .bss section occupies space up to
296      _end.  Align after .bss to ensure correct alignment even if the
297      .bss section disappears because there are no input sections.  */
298   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
299  }
300  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
301  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
302  ${RELOCATING+${OTHER_END_SYMBOLS}}
303  ${RELOCATING+_end = .;}
304  ${RELOCATING+PROVIDE (end = .);}
305  ${RELOCATING+${DATA_SEGMENT_END}}
306
307  /* These sections are not mapped under the BPABI.  */
308  .dynamic      0 : { *(.dynamic) }
309  .hash         0 : { *(.hash) }
310  .dynsym       0 : { *(.dynsym) }
311  .dynstr       0 : { *(.dynstr) }
312  .gnu.version  0 : { *(.gnu.version) }
313  .gnu.version_d 0: { *(.gnu.version_d) }
314  .gnu.version_r 0: { *(.gnu.version_r) }
315  ${CREATE_SHLIB-${INTERP}}
316
317  /* Stabs debugging sections.  */
318  .stab          0 : { *(.stab) }
319  .stabstr       0 : { *(.stabstr) }
320  .stab.excl     0 : { *(.stab.excl) }
321  .stab.exclstr  0 : { *(.stab.exclstr) }
322  .stab.index    0 : { *(.stab.index) }
323  .stab.indexstr 0 : { *(.stab.indexstr) }
324
325  .comment       0 : { *(.comment) }
326
327  /* DWARF debug sections.
328     Symbols in the DWARF debugging sections are relative to the beginning
329     of the section so we begin them at 0.  */
330
331  /* DWARF 1 */
332  .debug          0 : { *(.debug) }
333  .line           0 : { *(.line) }
334
335  /* GNU DWARF 1 extensions */
336  .debug_srcinfo  0 : { *(.debug_srcinfo) }
337  .debug_sfnames  0 : { *(.debug_sfnames) }
338
339  /* DWARF 1.1 and DWARF 2 */
340  .debug_aranges  0 : { *(.debug_aranges) }
341  .debug_pubnames 0 : { *(.debug_pubnames) }
342
343  /* DWARF 2 */
344  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
345  .debug_abbrev   0 : { *(.debug_abbrev) }
346  .debug_line     0 : { *(.debug_line) }
347  .debug_frame    0 : { *(.debug_frame) }
348  .debug_str      0 : { *(.debug_str) }
349  .debug_loc      0 : { *(.debug_loc) }
350  .debug_macinfo  0 : { *(.debug_macinfo) }
351
352  /* SGI/MIPS DWARF 2 extensions */
353  .debug_weaknames 0 : { *(.debug_weaknames) }
354  .debug_funcnames 0 : { *(.debug_funcnames) }
355  .debug_typenames 0 : { *(.debug_typenames) }
356  .debug_varnames  0 : { *(.debug_varnames) }
357
358  ${STACK_ADDR+${STACK}}
359  ${OTHER_SECTIONS}
360  ${RELOCATING+${OTHER_SYMBOLS}}
361  ${RELOCATING+${STACKNOTE}}
362EOF
363
364# These relocations sections are part of the read-only segment in SVR4
365# executables, but are not mapped in BPABI executables.
366if [ "x$COMBRELOC" = x ]; then
367  COMBRELOCCAT=cat
368else
369  COMBRELOCCAT="cat > $COMBRELOC"
370fi
371eval $COMBRELOCCAT <<EOF
372  .rel.init     0 : { *(.rel.init) }
373  .rela.init    0 : { *(.rela.init) }
374  .rel.text     0 : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
375  .rela.text    0 : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
376  .rel.fini     0 : { *(.rel.fini) }
377  .rela.fini    0 : { *(.rela.fini) }
378  .rel.rodata   0 : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
379  .rela.rodata  0 : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
380  ${OTHER_READONLY_RELOC_SECTIONS}
381  .rel.data.rel.ro 0 : { *(.rel.data.rel.ro${RELOCATING+*}) }
382  .rela.data.rel.ro 0 : { *(.rel.data.rel.ro${RELOCATING+*}) }
383  .rel.data     0 : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
384  .rela.data    0 : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
385  .rel.tdata	0 : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
386  .rela.tdata	0 : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
387  .rel.tbss	0 : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
388  .rela.tbss	0 : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
389  .rel.ctors    0 : { *(.rel.ctors) }
390  .rela.ctors   0 : { *(.rela.ctors) }
391  .rel.dtors    0 : { *(.rel.dtors) }
392  .rela.dtors   0 : { *(.rela.dtors) }
393  ${REL_SDATA}
394  ${REL_SBSS}
395  ${REL_SDATA2}
396  ${REL_SBSS2}
397  .rel.bss      0 : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
398  .rela.bss     0 : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
399  .rel.init_array  0 : { *(.rel.init_array) }
400  .rela.init_array 0 : { *(.rela.init_array) }
401  .rel.fini_array  0 : { *(.rel.fini_array) }
402  .rela.fini_array 0 : { *(.rela.fini_array) }
403EOF
404if [ -n "$COMBRELOC" ]; then
405cat <<EOF
406  .rel.dyn      0 :
407    {
408EOF
409sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
410cat <<EOF
411    }
412  .rela.dyn     0 :
413    {
414EOF
415sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
416cat <<EOF
417    }
418EOF
419fi
420cat <<EOF
421  .rel.plt      0 : { *(.rel.plt) }
422  .rela.plt     0 : { *(.rela.plt) }
423  ${OTHER_PLT_RELOC_SECTIONS}
424  .rel.other    0 : { *(.rel.*) }
425  .rela.other   0 : { *(.rela.*) }
426  .reli.other   0 : { *(.reli.*) }
427}
428EOF
429