1 /* $OpenBSD: cpu.h,v 1.31 2021/06/02 00:39:27 cheloha Exp $ */ 2 /* $NetBSD: cpu.h,v 1.41 2006/01/21 04:24:12 uwe Exp $ */ 3 4 /*- 5 * Copyright (c) 2002 The NetBSD Foundation, Inc. All rights reserved. 6 * Copyright (c) 1990 The Regents of the University of California. 7 * All rights reserved. 8 * 9 * This code is derived from software contributed to Berkeley by 10 * William Jolitz. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. Neither the name of the University nor the names of its contributors 21 * may be used to endorse or promote products derived from this software 22 * without specific prior written permission. 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 34 * SUCH DAMAGE. 35 * 36 * @(#)cpu.h 5.4 (Berkeley) 5/9/91 37 */ 38 39 /* 40 * SH3/SH4 support. 41 * 42 * T.Horiuchi Brains Corp. 5/22/98 43 */ 44 45 #ifndef _SH_CPU_H_ 46 #define _SH_CPU_H_ 47 48 #include <sh/psl.h> 49 #include <sh/frame.h> 50 51 #ifdef _KERNEL 52 53 /* 54 * Per-CPU information. 55 */ 56 57 #include <machine/intr.h> 58 #include <sys/sched.h> 59 60 struct cpu_info { 61 struct proc *ci_curproc; 62 63 struct schedstate_percpu ci_schedstate; /* scheduler state */ 64 u_int32_t ci_randseed; 65 #ifdef DIAGNOSTIC 66 int ci_mutex_level; 67 #endif 68 #ifdef GPROF 69 struct gmonparam *ci_gmon; 70 #endif 71 72 int ci_want_resched; 73 74 char ci_panicbuf[512]; 75 }; 76 77 extern struct cpu_info cpu_info_store; 78 #define curcpu() (&cpu_info_store) 79 #define cpu_number() 0 80 #define CPU_IS_PRIMARY(ci) 1 81 #define CPU_INFO_ITERATOR int 82 #define CPU_INFO_FOREACH(cii, ci) \ 83 for (cii = 0, ci = curcpu(); ci != NULL; ci = NULL) 84 #define CPU_INFO_UNIT(ci) 0 85 #define MAXCPUS 1 86 #define cpu_unidle(ci) 87 88 #define CPU_BUSY_CYCLE() do {} while (0) 89 90 91 /* 92 * Arguments to hardclock and gatherstats encapsulate the previous 93 * machine state in an opaque clockframe. 94 */ 95 struct clockframe { 96 int spc; /* program counter at time of interrupt */ 97 int ssr; /* status register at time of interrupt */ 98 int ssp; /* stack pointer at time of interrupt */ 99 }; 100 101 #define CLKF_USERMODE(cf) (!KERNELMODE((cf)->ssr)) 102 #define CLKF_PC(cf) ((cf)->spc) 103 #define CLKF_INTR(cf) 0 /* XXX */ 104 105 /* 106 * This is used during profiling to integrate system time. It can safely 107 * assume that the process is resident. 108 */ 109 #define PROC_PC(p) ((p)->p_md.md_regs->tf_spc) 110 #define PROC_STACK(p) ((p)->p_md.md_regs->tf_r15) 111 112 /* 113 * Preempt the current process if in interrupt from user mode, 114 * or after the current trap/syscall if in system mode. 115 */ 116 void need_resched(struct cpu_info *); 117 #define clear_resched(ci) (ci)->ci_want_resched = 0 118 119 /* 120 * Give a profiling tick to the current process when the user profiling 121 * buffer pages are invalid. On the MIPS, request an ast to send us 122 * through trap, marking the proc as needing a profiling tick. 123 */ 124 #define need_proftick(p) aston(p) 125 126 /* 127 * Notify the current process (p) that it has a signal pending, 128 * process as soon as possible. 129 */ 130 #define signotify(p) aston(p) 131 132 #define aston(p) ((p)->p_md.md_astpending = 1) 133 134 /* 135 * We need a machine-independent name for this. 136 */ 137 #define DELAY(x) delay(x) 138 139 #define cpu_idle_enter() do { /* nothing */ } while (0) 140 #define cpu_idle_cycle() __asm volatile("sleep") 141 #define cpu_idle_leave() do { /* nothing */ } while (0) 142 143 #endif /* _KERNEL */ 144 145 /* 146 * Logical address space of SH3/SH4 CPU. 147 */ 148 #define SH3_PHYS_MASK 0x1fffffff 149 150 #define SH3_P0SEG_BASE 0x00000000 /* TLB mapped, also U0SEG */ 151 #define SH3_P0SEG_END 0x7fffffff 152 #define SH3_P1SEG_BASE 0x80000000 /* pa == va */ 153 #define SH3_P1SEG_END 0x9fffffff 154 #define SH3_P2SEG_BASE 0xa0000000 /* pa == va, non-cacheable */ 155 #define SH3_P2SEG_END 0xbfffffff 156 #define SH3_P3SEG_BASE 0xc0000000 /* TLB mapped, kernel mode */ 157 #define SH3_P3SEG_END 0xdfffffff 158 #define SH3_P4SEG_BASE 0xe0000000 /* peripheral space */ 159 #define SH3_P4SEG_END 0xffffffff 160 161 #define SH3_P1SEG_TO_PHYS(x) ((uint32_t)(x) & SH3_PHYS_MASK) 162 #define SH3_P2SEG_TO_PHYS(x) ((uint32_t)(x) & SH3_PHYS_MASK) 163 #define SH3_PHYS_TO_P1SEG(x) ((uint32_t)(x) | SH3_P1SEG_BASE) 164 #define SH3_PHYS_TO_P2SEG(x) ((uint32_t)(x) | SH3_P2SEG_BASE) 165 #define SH3_P1SEG_TO_P2SEG(x) ((uint32_t)(x) | 0x20000000) 166 #define SH3_P2SEG_TO_P1SEG(x) ((uint32_t)(x) & ~0x20000000) 167 168 #ifdef _KERNEL 169 #ifndef __lint__ 170 171 /* 172 * Switch from P1 (cached) to P2 (uncached). This used to be written 173 * using gcc's assigned goto extension, but gcc4 aggressive optimizations 174 * tend to optimize that away under certain circumstances. 175 */ 176 #define RUN_P2 \ 177 do { \ 178 register uint32_t r0 asm("r0"); \ 179 uint32_t pc; \ 180 __asm volatile( \ 181 " mov.l 1f, %1 ;" \ 182 " mova 2f, %0 ;" \ 183 " or %0, %1 ;" \ 184 " jmp @%1 ;" \ 185 " nop ;" \ 186 " .align 2 ;" \ 187 "1: .long 0x20000000;" \ 188 "2:;" \ 189 : "=r"(r0), "=r"(pc)); \ 190 } while (0) 191 192 /* 193 * Switch from P2 (uncached) back to P1 (cached). We need to be 194 * running on P2 to access cache control, memory-mapped cache and TLB 195 * arrays, etc. and after touching them at least 8 instructinos are 196 * necessary before jumping to P1, so provide that padding here. 197 */ 198 #define RUN_P1 \ 199 do { \ 200 register uint32_t r0 asm("r0"); \ 201 uint32_t pc; \ 202 __asm volatile( \ 203 /*1*/ " mov.l 1f, %1 ;" \ 204 /*2*/ " mova 2f, %0 ;" \ 205 /*3*/ " nop ;" \ 206 /*4*/ " and %0, %1 ;" \ 207 /*5*/ " nop ;" \ 208 /*6*/ " nop ;" \ 209 /*7*/ " nop ;" \ 210 /*8*/ " nop ;" \ 211 " jmp @%1 ;" \ 212 " nop ;" \ 213 " .align 2 ;" \ 214 "1: .long ~0x20000000;" \ 215 "2:;" \ 216 : "=r"(r0), "=r"(pc)); \ 217 } while (0) 218 219 /* 220 * If RUN_P1 is the last thing we do in a function we can omit it, b/c 221 * we are going to return to a P1 caller anyway, but we still need to 222 * ensure there's at least 8 instructions before jump to P1. 223 */ 224 #define PAD_P1_SWITCH __asm volatile ("nop;nop;nop;nop;nop;nop;nop;nop;") 225 226 #else /* __lint__ */ 227 #define RUN_P2 do {} while (/* CONSTCOND */ 0) 228 #define RUN_P1 do {} while (/* CONSTCOND */ 0) 229 #define PAD_P1_SWITCH do {} while (/* CONSTCOND */ 0) 230 #endif 231 #endif 232 233 #if defined(SH4) 234 /* SH4 Processor Version Register */ 235 #define SH4_PVR_ADDR 0xff000030 /* P4 address */ 236 #define SH4_PVR (*(volatile uint32_t *) SH4_PVR_ADDR) 237 #define SH4_PRR_ADDR 0xff000044 /* P4 address */ 238 #define SH4_PRR (*(volatile uint32_t *) SH4_PRR_ADDR) 239 240 #define SH4_PVR_MASK 0xffffff00 241 #define SH4_PVR_SH7750 0x04020500 /* SH7750 */ 242 #define SH4_PVR_SH7750S 0x04020600 /* SH7750S */ 243 #define SH4_PVR_SH775xR 0x04050000 /* SH775xR */ 244 #define SH4_PVR_SH7751 0x04110000 /* SH7751 */ 245 246 #define SH4_PRR_MASK 0xfffffff0 247 #define SH4_PRR_7750R 0x00000100 /* SH7750R */ 248 #define SH4_PRR_7751R 0x00000110 /* SH7751R */ 249 #endif 250 251 /* 252 * pull in #defines for kinds of processors 253 */ 254 #include <machine/cputypes.h> 255 256 #ifdef _KERNEL 257 void sh_cpu_init(int, int); 258 void sh_startup(void); 259 __dead void cpu_reset(void); /* soft reset */ 260 void _cpu_spin(uint32_t); /* for delay loop. */ 261 void delay(int); 262 struct pcb; 263 void savectx(struct pcb *); 264 struct fpreg; 265 void fpu_save(struct fpreg *); 266 void fpu_restore(struct fpreg *); 267 u_int cpu_dump(int (*)(dev_t, daddr_t, caddr_t, size_t), daddr_t *); 268 u_int cpu_dumpsize(void); 269 void dumpconf(void); 270 void dumpsys(void); 271 unsigned int cpu_rnd_messybits(void); 272 273 static inline u_long 274 intr_disable(void) 275 { 276 return (u_long)_cpu_intr_suspend(); 277 } 278 279 static inline void 280 intr_restore(u_long s) 281 { 282 _cpu_intr_resume((int)s); 283 } 284 #endif /* _KERNEL */ 285 #endif /* !_SH_CPU_H_ */ 286