1 /* $OpenBSD: smc83c170var.h,v 1.2 2008/06/26 05:42:16 ray Exp $ */ 2 /* $NetBSD: smc83c170var.h,v 1.9 2005/02/04 02:10:37 perry Exp $ */ 3 4 /*- 5 * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. 6 * All rights reserved. 7 * 8 * This code is derived from software contributed to The NetBSD Foundation 9 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 10 * NASA Ames Research Center. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 23 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 31 * POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34 #ifndef _DEV_IC_SMC83C170VAR_H_ 35 #define _DEV_IC_SMC83C170VAR_H_ 36 37 #include <sys/timeout.h> 38 39 /* 40 * Misc. definitions for the Standard Microsystems Corp. 83C170 41 * Ethernet PCI Integrated Controller (EPIC/100) driver. 42 */ 43 44 /* 45 * Transmit descriptor list size. 46 */ 47 #define EPIC_NTXDESC 128 48 #define EPIC_NTXDESC_MASK (EPIC_NTXDESC - 1) 49 #define EPIC_NEXTTX(x) ((x + 1) & EPIC_NTXDESC_MASK) 50 51 /* 52 * Receive descriptor list size. 53 */ 54 #define EPIC_NRXDESC 64 55 #define EPIC_NRXDESC_MASK (EPIC_NRXDESC - 1) 56 #define EPIC_NEXTRX(x) ((x + 1) & EPIC_NRXDESC_MASK) 57 58 /* 59 * Control structures are DMA'd to the EPIC chip. We allocate them in 60 * a single clump that maps to a single DMA segment to make several things 61 * easier. 62 */ 63 struct epic_control_data { 64 /* 65 * The transmit descriptors. 66 */ 67 struct epic_txdesc ecd_txdescs[EPIC_NTXDESC]; 68 69 /* 70 * The receive descriptors. 71 */ 72 struct epic_rxdesc ecd_rxdescs[EPIC_NRXDESC]; 73 74 /* 75 * The transmit fraglists. 76 */ 77 struct epic_fraglist ecd_txfrags[EPIC_NTXDESC]; 78 }; 79 80 #define EPIC_CDOFF(x) offsetof(struct epic_control_data, x) 81 #define EPIC_CDTXOFF(x) EPIC_CDOFF(ecd_txdescs[(x)]) 82 #define EPIC_CDRXOFF(x) EPIC_CDOFF(ecd_rxdescs[(x)]) 83 #define EPIC_CDFLOFF(x) EPIC_CDOFF(ecd_txfrags[(x)]) 84 85 /* 86 * Software state for transmit and receive desciptors. 87 */ 88 struct epic_descsoft { 89 struct mbuf *ds_mbuf; /* head of mbuf chain */ 90 bus_dmamap_t ds_dmamap; /* our DMA map */ 91 }; 92 93 /* 94 * Software state per device. 95 */ 96 struct epic_softc { 97 struct device sc_dev; /* generic device information */ 98 bus_space_tag_t sc_st; /* bus space tag */ 99 bus_space_handle_t sc_sh; /* bus space handle */ 100 bus_dma_tag_t sc_dmat; /* bus DMA tag */ 101 struct arpcom sc_arpcom; /* ethernet common data */ 102 void *sc_sdhook; /* shutdown hook */ 103 104 int sc_hwflags; /* info about board */ 105 #define EPIC_HAS_BNC 0x01 /* BNC on serial interface */ 106 #define EPIC_HAS_MII_FIBER 0x02 /* fiber on MII lxtphy */ 107 #define EPIC_DUPLEXLED_ON_694 0x04 /* duplex LED by software */ 108 109 struct mii_data sc_mii; /* MII/media information */ 110 struct timeout sc_mii_timeout; /* MII timeout */ 111 112 bus_dmamap_t sc_cddmamap; /* control data DMA map */ 113 #define sc_cddma sc_cddmamap->dm_segs[0].ds_addr 114 bus_dmamap_t sc_nulldmamap; /* DMA map for the pad buffer */ 115 #define sc_nulldma sc_nulldmamap->dm_segs[0].ds_addr 116 117 /* 118 * Software state for transmit and receive descriptors. 119 */ 120 struct epic_descsoft sc_txsoft[EPIC_NTXDESC]; 121 struct epic_descsoft sc_rxsoft[EPIC_NRXDESC]; 122 123 /* 124 * Control data structures. 125 */ 126 struct epic_control_data *sc_control_data; 127 128 int sc_txpending; /* number of TX requests pending */ 129 int sc_txdirty; /* first dirty TX descriptor */ 130 int sc_txlast; /* last used TX descriptor */ 131 132 int sc_rxptr; /* next ready RX descriptor */ 133 134 u_int sc_serinst; /* ifmedia instance for serial mode */ 135 }; 136 137 #define EPIC_CDTXADDR(sc, x) ((sc)->sc_cddma + EPIC_CDTXOFF((x))) 138 #define EPIC_CDRXADDR(sc, x) ((sc)->sc_cddma + EPIC_CDRXOFF((x))) 139 #define EPIC_CDFLADDR(sc, x) ((sc)->sc_cddma + EPIC_CDFLOFF((x))) 140 141 #define EPIC_CDTX(sc, x) (&(sc)->sc_control_data->ecd_txdescs[(x)]) 142 #define EPIC_CDRX(sc, x) (&(sc)->sc_control_data->ecd_rxdescs[(x)]) 143 #define EPIC_CDFL(sc, x) (&(sc)->sc_control_data->ecd_txfrags[(x)]) 144 145 #define EPIC_DSTX(sc, x) (&(sc)->sc_txsoft[(x)]) 146 #define EPIC_DSRX(sc, x) (&(sc)->sc_rxsoft[(x)]) 147 148 #define EPIC_CDTXSYNC(sc, x, ops) \ 149 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ 150 EPIC_CDTXOFF((x)), sizeof(struct epic_txdesc), (ops)) 151 152 #define EPIC_CDRXSYNC(sc, x, ops) \ 153 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ 154 EPIC_CDRXOFF((x)), sizeof(struct epic_rxdesc), (ops)) 155 156 #define EPIC_CDFLSYNC(sc, x, ops) \ 157 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ 158 EPIC_CDFLOFF((x)), sizeof(struct epic_fraglist), (ops)) 159 160 #define EPIC_INIT_RXDESC(sc, x) \ 161 do { \ 162 struct epic_descsoft *__ds = EPIC_DSRX((sc), (x)); \ 163 struct epic_rxdesc *__rxd = EPIC_CDRX((sc), (x)); \ 164 struct mbuf *__m = __ds->ds_mbuf; \ 165 \ 166 /* \ 167 * Note we scoot the packet forward 2 bytes in the buffer \ 168 * so that the payload after the Ethernet header is aligned \ 169 * to a 4 byte boundary. \ 170 */ \ 171 __m->m_data = __m->m_ext.ext_buf + 2; \ 172 __rxd->er_bufaddr = __ds->ds_dmamap->dm_segs[0].ds_addr + 2; \ 173 __rxd->er_control = RXCTL_BUFLENGTH(__m->m_ext.ext_size - 2); \ 174 __rxd->er_rxstatus = ER_RXSTAT_OWNER; \ 175 __rxd->er_nextdesc = EPIC_CDRXADDR((sc), EPIC_NEXTRX((x))); \ 176 EPIC_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \ 177 } while (/* CONSTCOND */ 0) 178 179 #ifdef _KERNEL 180 void epic_attach(struct epic_softc *, const char *); 181 int epic_intr(void *); 182 #endif /* _KERNEL */ 183 184 #endif /* _DEV_IC_SMC83C170VAR_H_ */ 185