1 /* $OpenBSD: if_cuereg.h,v 1.11 2010/12/06 04:41:39 jakemsr Exp $ */ 2 /* $NetBSD: if_cuereg.h,v 1.14 2001/01/21 22:09:24 augustss Exp $ */ 3 /* 4 * Copyright (c) 1997, 1998, 1999, 2000 5 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 * 34 * $FreeBSD: src/sys/dev/usb/if_cuereg.h,v 1.3 2000/01/16 22:45:06 wpaul Exp $ 35 */ 36 37 /* 38 * Definitions for the CATC Netmate II USB to ethernet controller. 39 */ 40 41 42 /* 43 * Vendor specific control commands. 44 */ 45 #define CUE_CMD_READSRAM 0xF1 46 #define CUE_CMD_GET_MACADDR 0xF2 47 #define CUE_CMD_RESET 0xF4 48 #define CUE_CMD_WRITEREG 0xFA 49 #define CUE_CMD_READREG 0xFB 50 #define CUE_CMD_WRITESRAM 0xFC 51 52 /* 53 * Internal registers 54 */ 55 #define CUE_TX_BUFCNT 0x20 56 #define CUE_RX_BUFCNT 0x21 57 #define CUE_ADVANCED_OPMODES 0x22 58 #define CUE_TX_BUFPKTS 0x23 59 #define CUE_RX_BUFPKTS 0x24 60 #define CUE_RX_MAXCHAIN 0x25 61 62 #define CUE_ETHCTL 0x60 63 #define CUE_ETHSTS 0x61 64 #define CUE_PAR5 0x62 65 #define CUE_PAR4 0x63 66 #define CUE_PAR3 0x64 67 #define CUE_PAR2 0x65 68 #define CUE_PAR1 0x66 69 #define CUE_PAR0 0x67 70 71 /* Error counters, all 16 bits wide. */ 72 #define CUE_TX_SINGLECOLL 0x69 73 #define CUE_TX_MULTICOLL 0x6B 74 #define CUE_TX_EXCESSCOLL 0x6D 75 #define CUE_RX_FRAMEERR 0x6F 76 77 #define CUE_LEDCTL 0x81 78 79 /* Advenced operating mode register */ 80 #define CUE_AOP_SRAMWAITS 0x03 81 #define CUE_AOP_EMBED_RXLEN 0x08 82 #define CUE_AOP_RXCOMBINE 0x10 83 #define CUE_AOP_TXCOMBINE 0x20 84 #define CUE_AOP_EVEN_PKT_READS 0x40 85 #define CUE_AOP_LOOPBK 0x80 86 87 /* Ethernet control register */ 88 #define CUE_ETHCTL_RX_ON 0x01 89 #define CUE_ETHCTL_LINK_POLARITY 0x02 90 #define CUE_ETHCTL_LINK_FORCE_OK 0x04 91 #define CUE_ETHCTL_MCAST_ON 0x08 92 #define CUE_ETHCTL_PROMISC 0x10 93 94 /* Ethernet status register */ 95 #define CUE_ETHSTS_NO_CARRIER 0x01 96 #define CUE_ETHSTS_LATECOLL 0x02 97 #define CUE_ETHSTS_EXCESSCOLL 0x04 98 #define CUE_ETHSTS_TXBUF_AVAIL 0x08 99 #define CUE_ETHSTS_BAD_POLARITY 0x10 100 #define CUE_ETHSTS_LINK_OK 0x20 101 102 /* LED control register */ 103 #define CUE_LEDCTL_BLINK_1X 0x00 104 #define CUE_LEDCTL_BLINK_2X 0x01 105 #define CUE_LEDCTL_BLINK_QUARTER_ON 0x02 106 #define CUE_LEDCTL_BLINK_QUARTER_OFF 0x03 107 #define CUE_LEDCTL_OFF 0x04 108 #define CUE_LEDCTL_FOLLOW_LINK 0x08 109 110 /* 111 * Address in ASIC's internal SRAM where the 112 * multicast hash table lives. The table is 64 bytes long, 113 * giving us a 512-bit table. We have to set the bit that 114 * corresponds to the broadcast address in order to enable 115 * reception of broadcast frames. 116 */ 117 #define CUE_MCAST_TABLE_ADDR 0xFA80 118 #define CUE_MCAST_TABLE_LEN 64 119 120 #define CUE_TIMEOUT 1000 121 #define CUE_BUFSZ 1536 122 #define CUE_MIN_FRAMELEN 60 123 #define CUE_RX_FRAMES 1 124 #define CUE_TX_FRAMES 1 125 126 #define CUE_RX_LIST_CNT 1 127 #define CUE_TX_LIST_CNT 1 128 129 #define CUE_CTL_READ 0x01 130 #define CUE_CTL_WRITE 0x02 131 132 #define CUE_CONFIG_NO 1 133 #define CUE_IFACE_IDX 0 134 135 /* 136 * The interrupt endpoint is currently unused by the CATC part. 137 */ 138 #define CUE_ENDPT_RX 0x0 139 #define CUE_ENDPT_TX 0x1 140 #define CUE_ENDPT_INTR 0x2 141 #define CUE_ENDPT_MAX 0x3 142 143 struct cue_type { 144 u_int16_t cue_vid; 145 u_int16_t cue_did; 146 }; 147 148 struct cue_softc; 149 150 struct cue_chain { 151 struct cue_softc *cue_sc; 152 usbd_xfer_handle cue_xfer; 153 char *cue_buf; 154 struct mbuf *cue_mbuf; 155 int cue_idx; 156 }; 157 158 struct cue_cdata { 159 struct cue_chain cue_tx_chain[CUE_TX_LIST_CNT]; 160 struct cue_chain cue_rx_chain[CUE_RX_LIST_CNT]; 161 int cue_tx_prod; 162 int cue_tx_cons; 163 int cue_tx_cnt; 164 int cue_rx_prod; 165 }; 166 167 struct cue_softc { 168 struct device cue_dev; 169 170 struct arpcom arpcom; 171 #define GET_IFP(sc) (&(sc)->arpcom.ac_if) 172 173 struct timeout cue_stat_ch; 174 175 usbd_device_handle cue_udev; 176 usbd_interface_handle cue_iface; 177 u_int16_t cue_vendor; 178 u_int16_t cue_product; 179 int cue_ed[CUE_ENDPT_MAX]; 180 usbd_pipe_handle cue_ep[CUE_ENDPT_MAX]; 181 u_int8_t cue_mctab[CUE_MCAST_TABLE_LEN]; 182 int cue_if_flags; 183 u_int16_t cue_rxfilt; 184 struct cue_cdata cue_cdata; 185 186 u_int cue_rx_errs; 187 struct timeval cue_rx_notice; 188 189 struct usb_task cue_tick_task; 190 struct usb_task cue_stop_task; 191 }; 192