$OpenBSD: mail9.nr,v 1.8 2009/07/29 18:15:38 martynas Exp $
Copyright (c) 1980, 1993
The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the University nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
@(#)mail9.nr 8.2 (Berkeley) 5/16/94
.sh 1 "Summary of commands, options, and escapes" .pp This section gives a quick summary of the .i Mail commands, binary and valued options, and tilde escapes. .pp The following table describes the commands:
.(b
.pp
The following table describes the options. Each option is
shown as being either a binary or valued option.
.)b
.(b
.pp
The following table summarizes the tilde escapes available
while sending mail.
.)b
.(b
.pp
The following table shows the command line flags that
.i Mail
accepts:
.)b
.lp
Notes:
.b -d
and
.b -T
are not for human use.
Copyright (c) 1980, 1993
The Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the University nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
@(#)mail9.nr 8.2 (Berkeley) 5/16/94
.sh 1 "Summary of commands, options, and escapes" .pp This section gives a quick summary of the .i Mail commands, binary and valued options, and tilde escapes. .pp The following table describes the commands:
| Command Description |
| + Same as next |
| - Back up to previous message |
| ? Print brief summary of Mail commands |
| ! Single command escape to shell |
| Print Type message with ignored fields |
| Reply Reply to author of message only |
| Respond Same as Reply |
| Type Type message with ignored fields |
| alias Define an alias as a set of user names |
| alternates List other names you are known by |
| chdir Change working directory, home by default |
| copy Copy a message to a file or folder |
| delete Delete a list of messages |
| dp Same as dt |
| dt Delete current message, type next message |
| edit Edit a list of messages |
| else Start of else part of conditional; see if |
| endif End of conditional statement; see if |
| exit Leave mail without changing anything |
| file Interrogate/change current mail file |
| folder Same as file |
| folders List the folders in your folder directory |
| from List headers of a list of messages |
| headers List current window of messages |
| help Same as ? |
| hold Same as preserve |
| if Conditional execution of Mail commands |
| ignore Set/examine list of ignored header fields |
| inc Incorporate new messages |
| list List valid Mail commands |
| mail Send mail to specified names |
| mbox Arrange to save a list of messages in mbox |
| more Invoke pager on message list |
| next Go to next message and type it |
| preserve Arrange to leave list of messages in system mailbox |
| print Print messages |
| quit Leave Mail; update system mailbox, mbox as appropriate |
| reply Compose a reply to a message |
| respond Same as reply |
| retain Supersedes ignore |
| save Append messages, headers included, on a file |
| saveignore List of headers to ignore when using the save command |
| saveretain List of headers to retain when using the save command |
| set Set binary or valued options |
| shell Invoke an interactive shell |
| size Prints out size of message list |
| source Read mail commands from a file |
| top Print first so many (5 by default) lines of list of messages |
| type Same as print |
| unalias Remove alias |
| undelete Undelete list of messages |
| unread Marks list of messages as not been read |
| unset Undo the operation of a set |
| visual Invoke visual editor on a list of messages |
| write Append messages to a file, don't include headers |
| xit Same as exit |
| z Scroll to next/previous screenful of headers |
| Option Type Description |
| EDITOR valued Pathname of editor for ~e and edit |
| LISTER valued Pathname of directory lister |
| MBOX valued Pathname of the mbox file |
| PAGER valued Pathname of pager for Print, print, Type and type |
| SHELL valued Pathname of shell for shell, ~! and ! |
| VISUAL valued Pathname of screen editor for ~v, visual |
| append binary Always append messages to end of mbox |
| ask binary Prompt user for Subject: field when sending |
| askbcc binary Prompt user for additional BCc's at end of message |
| askcc binary Prompt user for additional Cc's at end of message |
| autoinc binary Automatically incorporate new mail |
| autoprint binary Print next message after delete |
| crt valued Minimum number of lines before using PAGER |
| debug binary Print out debugging information |
| dot binary Accept . alone on line to terminate message input |
| escape valued Escape character to be used instead of ~ |
| folder valued Directory to store folders in |
| hold binary Hold messages in system mailbox by default |
| ignore binary Ignore <Control-C> while sending mail |
| ignoreeof binary Don't terminate letters/command input with ^D |
| indentprefix valued String used for indenting messages |
| keep binary Don't unlink system mailbox when empty |
| keepsave binary Don't delete saved messages by default |
| metoo binary Include sending user in aliases |
| noheader binary Suppress initial printing of version and headers |
| nosave binary Don't save partial letter in dead.letter |
| Replyall binary Reverses the sense of the [Rr]eply commands |
| quiet binary Suppress printing of Mail version/message numbers |
| record valued File to save all outgoing mail in |
| screen valued Size of window of message headers for z, etc. |
| searchheaders binary Search string for message headers |
| sendmail valued Choose alternate mail delivery system |
| toplines valued Number of lines to print in top |
| verbose binary Invoke sendmail with the -v flag |
| Escape Arguments Description |
| ~b name ... Add names to "blind" Cc: list. |
| ~c name ... Add names to Cc: field. |
| ~d Read dead.letter into message. |
| ~e Invoke text editor on partial message. |
| ~F messages Same as ~f, but includes all headers. |
| ~f messages Read in messages. |
| ~h Edit the header fields. |
| ~M messages Same as ~m, but includes all headers. |
| ~m messages Read in messages, right shifted by a tab. |
| ~p Print (show) the message buffer. |
| ~q Abort message; optionally save copy to ~/dead.letter. |
| ~r file | ~< file Read a file into the message buffer. |
| ~s string Set Subject: field to string. |
| ~t name ... Add names to To: field. |
| ~v Invoke display editor on message. |
| ~w filename Write message to file. |
| ~x Abort message; no copy is saved. |
| ~? Print a brief summary of tilde escapes. |
| ~!command Execute shell command. |
| ~|command Pipe message through command. |
| ~:command | ~_command Execute a Mail command. |
| ~~string Quote a single tilde. |
| ~. Simulate end of file on input. |
| Flag Description |
| -b list Send blind carbon copies to list. |
| -c list Send carbon copies to list |
| -d Turn on debugging |
| -f [name] Show messages in name or ~/mbox |
| -I Force Mail to run in interactive mode |
| -i Ignore tty interrupt signals |
| -N Suppress the initial printing of headers |
| -n Inhibit reading of /etc/mail.rc |
| -s subject Use subject as subject in outgoing mail |
| -T file Article-id's of read/deleted messages to file |
| -u user Read user's mail instead of your own |
| -v Invoke sendmail with the -v flag |