xref: /original-bsd/sys/hp300/stand/ite_dv.c (revision ea3a8ee8)
1 /*
2  * Copyright (c) 1988 University of Utah.
3  * Copyright (c) 1990 The Regents of the University of California.
4  * All rights reserved.
5  *
6  * This code is derived from software contributed to Berkeley by
7  * the Systems Programming Group of the University of Utah Computer
8  * Science Department.
9  *
10  * %sccs.include.redist.c%
11  *
12  * from: Utah $Hdr: ite_dv.c 1.2 92/01/20$
13  *
14  *	@(#)ite_dv.c	7.4 (Berkeley) 10/11/92
15  */
16 
17 #include <hp300/stand/samachdep.h>
18 
19 #ifdef ITECONSOLE
20 
21 #include <sys/param.h>
22 #include <hp/dev/itevar.h>
23 #include <hp/dev/itereg.h>
24 #include <hp300/dev/grf_dvreg.h>
25 
26 #define REGBASE		((struct dvboxfb *)(ip->regbase))
27 #define WINDOWMOVER	dvbox_windowmove
28 
29 dvbox_init(ip)
30 	struct ite_softc *ip;
31 {
32 	int i;
33 
34 	dv_reset(ip->regbase);
35 	DELAY(4000);
36 
37 	/*
38 	 * Turn on frame buffer, turn on overlay planes, set replacement
39 	 * rule, enable top overlay plane writes for ite, disable all frame
40 	 * buffer planes, set byte per pixel, and display frame buffer 0.
41 	 * Lastly, turn on the box.
42 	 */
43 	REGBASE->interrupt = 0x04;
44 	REGBASE->drive     = 0x10;
45  	REGBASE->rep_rule  = RR_COPY << 4 | RR_COPY;
46 	REGBASE->opwen     = 0x01;
47 	REGBASE->fbwen     = 0x0;
48 	REGBASE->fold      = 0x01;
49 	REGBASE->vdrive    = 0x0;
50 	REGBASE->dispen    = 0x01;
51 
52 	/*
53 	 * Video enable top overlay plane.
54 	 */
55 	REGBASE->opvenp = 0x01;
56 	REGBASE->opvens = 0x01;
57 
58 	/*
59 	 * Make sure that overlay planes override frame buffer planes.
60 	 */
61 	REGBASE->ovly0p  = 0x0;
62 	REGBASE->ovly0s  = 0x0;
63 	REGBASE->ovly1p  = 0x0;
64 	REGBASE->ovly1s  = 0x0;
65 	REGBASE->fv_trig = 0x1;
66 	DELAY(400);
67 
68 	/*
69 	 * Setup the overlay colormaps. Need to set the 0,1 (black/white)
70 	 * color for both banks.
71 	 */
72 
73 	for (i = 0; i <= 1; i++) {
74 		REGBASE->cmapbank = i;
75 		REGBASE->rgb[0].red   = 0x00;
76 		REGBASE->rgb[0].green = 0x00;
77 		REGBASE->rgb[0].blue  = 0x00;
78 		REGBASE->rgb[1].red   = 0xFF;
79 		REGBASE->rgb[1].green = 0xFF;
80 		REGBASE->rgb[1].blue  = 0xFF;
81 	}
82 	REGBASE->cmapbank = 0;
83 
84 	db_waitbusy(ip->regbase);
85 
86 	ite_fontinfo(ip);
87 	ite_fontinit(ip);
88 
89 	/*
90 	 * Clear the (visible) framebuffer.
91 	 */
92 	dvbox_windowmove(ip, 0, 0, 0, 0, ip->dheight, ip->dwidth, RR_CLEAR);
93 	db_waitbusy(ip->regbase);
94 
95 	/*
96 	 * Stash the inverted cursor.
97 	 */
98 	dvbox_windowmove(ip, charY(ip, ' '), charX(ip, ' '),
99 			 ip->cblanky, ip->cblankx, ip->ftheight,
100 			 ip->ftwidth, RR_COPYINVERTED);
101 	db_waitbusy(ip->regbase);
102 }
103 
104 dvbox_putc(ip, c, dy, dx, mode)
105 	register struct ite_softc *ip;
106         register int dy, dx;
107 	int c, mode;
108 {
109 	dvbox_windowmove(ip, charY(ip, c), charX(ip, c),
110 			 dy * ip->ftheight, dx * ip->ftwidth,
111 			 ip->ftheight, ip->ftwidth, RR_COPY);
112 }
113 
114 dvbox_cursor(ip, flag)
115 	register struct ite_softc *ip;
116         register int flag;
117 {
118 	if (flag == DRAW_CURSOR)
119 		draw_cursor(ip)
120 	else if (flag == MOVE_CURSOR) {
121 		erase_cursor(ip)
122 		draw_cursor(ip)
123 	}
124 	else
125 		erase_cursor(ip)
126 }
127 
128 dvbox_clear(ip, sy, sx, h, w)
129 	struct ite_softc *ip;
130 	register int sy, sx, h, w;
131 {
132 	dvbox_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth,
133 			 sy * ip->ftheight, sx * ip->ftwidth,
134 			 h  * ip->ftheight, w  * ip->ftwidth,
135 			 RR_CLEAR);
136 }
137 
138 dvbox_scroll(ip, sy, sx, count, dir)
139         register struct ite_softc *ip;
140         register int sy, count;
141         int dir, sx;
142 {
143 	register int dy = sy - count;
144 	register int height = ip->rows - sy;
145 
146 	dvbox_cursor(ip, ERASE_CURSOR);
147 
148 	dvbox_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth,
149 			 dy * ip->ftheight, sx * ip->ftwidth,
150 			 height * ip->ftheight,
151 			 ip->cols * ip->ftwidth, RR_COPY);
152 }
153 
154 dvbox_windowmove(ip, sy, sx, dy, dx, h, w, func)
155 	struct ite_softc *ip;
156 	int sy, sx, dy, dx, h, w, func;
157 {
158 	register struct dvboxfb *dp = REGBASE;
159 	if (h == 0 || w == 0)
160 		return;
161 
162 	db_waitbusy(ip->regbase);
163 	dp->rep_rule = func << 4 | func;
164 	dp->source_y = sy;
165 	dp->source_x = sx;
166 	dp->dest_y   = dy;
167 	dp->dest_x   = dx;
168 	dp->wheight  = h;
169 	dp->wwidth   = w;
170 	dp->wmove    = 1;
171 }
172 
173 dv_reset(dbp)
174 	register struct dvboxfb *dbp;
175 {
176   	dbp->reset = 0x80;
177 	DELAY(400);
178 
179 	dbp->interrupt = 0x04;
180 	dbp->en_scan   = 0x01;
181 	dbp->fbwen     = ~0;
182 	dbp->opwen     = ~0;
183 	dbp->fold      = 0x01;
184 	dbp->drive     = 0x01;
185 	dbp->rep_rule  = 0x33;
186 	dbp->alt_rr    = 0x33;
187 	dbp->zrr       = 0x33;
188 
189 	dbp->fbvenp    = 0xFF;
190 	dbp->dispen    = 0x01;
191 	dbp->fbvens    = 0x0;
192 	dbp->fv_trig   = 0x01;
193 	DELAY(400);
194 	dbp->vdrive    = 0x0;
195 	dbp->zconfig   = 0x0;
196 
197 	while (dbp->wbusy & 0x01)
198 	  DELAY(400);
199 
200 	/*
201 	 * Start of missing ROM code.
202 	 */
203 	dbp->cmapbank = 0;
204 
205 	dbp->red0   = 0;
206 	dbp->red1   = 0;
207 	dbp->green0 = 0;
208 	dbp->green1 = 0;
209 	dbp->blue0  = 0;
210 	dbp->blue1  = 0;
211 
212 	dbp->panxh   = 0;
213 	dbp->panxl   = 0;
214 	dbp->panyh   = 0;
215 	dbp->panyl   = 0;
216 	dbp->zoom    = 0;
217 	dbp->cdwidth = 0x50;
218 	dbp->chstart = 0x52;
219 	dbp->cvwidth = 0x22;
220 	dbp->pz_trig = 1;
221 	/*
222 	 * End of missing ROM code.
223 	 */
224 }
225 
226 #endif
227