1 /*- 2 * Copyright (c) 1991 The Regents of the University of California. 3 * All rights reserved. 4 * 5 * This code is derived from software contributed to Berkeley by 6 * William Jolitz. 7 * 8 * %sccs.include.redist.c% 9 * 10 * @(#)isa.c 7.5 (Berkeley) 05/07/93 11 */ 12 13 /* 14 * code to manage AT bus 15 */ 16 17 #include <sys/param.h> 18 #include <sys/systm.h> 19 #include <sys/conf.h> 20 #include <sys/file.h> 21 #include <sys/buf.h> 22 #include <sys/uio.h> 23 #include <sys/syslog.h> 24 25 #include <machine/segments.h> 26 #include <i386/isa/isa_device.h> 27 #include <i386/isa/icu.h> 28 #include <vm/vm.h> 29 30 /* 31 * Configure all ISA devices 32 */ 33 isa_configure() { 34 struct isa_device *dvp; 35 struct isa_driver *dp; 36 37 splhigh(); 38 INTREN(IRQ_SLAVE); 39 for (dvp = isa_devtab_bio; config_isadev(dvp,&biomask); dvp++); 40 for (dvp = isa_devtab_tty; config_isadev(dvp,&ttymask); dvp++); 41 for (dvp = isa_devtab_net; config_isadev(dvp,&netmask); dvp++); 42 for (dvp = isa_devtab_null; config_isadev(dvp,0); dvp++); 43 #include "sl.h" 44 #if NSL > 0 45 netmask |= ttymask; 46 ttymask |= netmask; 47 #endif 48 49 /* 50 * The problem is... if netmask == 0, then the loopback 51 * code can do some really ugly things. 52 * workaround for this: if netmask == 0, set it to 0x8000, which 53 * is the value used by splsoftclock. this is nasty, but it 54 * should work until this interrupt system goes away. -- cgd 55 */ 56 if (netmask == 0) 57 netmask = 0x8000; /* same as for softclock. XXX */ 58 59 /* biomask |= ttymask ; can some tty devices use buffers? */ 60 printf("biomask %x ttymask %x netmask %x\n", biomask, ttymask, netmask); 61 splnone(); 62 } 63 64 /* 65 * Configure an ISA device. 66 */ 67 config_isadev(isdp, mp) 68 struct isa_device *isdp; 69 int *mp; 70 { 71 struct isa_driver *dp; 72 73 if (dp = isdp->id_driver) { 74 if (isdp->id_maddr) { 75 extern int atdevbase; 76 77 isdp->id_maddr -= 0xa0000; 78 isdp->id_maddr += atdevbase; 79 } 80 isdp->id_alive = (*dp->probe)(isdp); 81 if (isdp->id_alive) { 82 printf("%s%d", dp->name, isdp->id_unit); 83 (*dp->attach)(isdp); 84 printf(" at 0x%x ", isdp->id_iobase); 85 if(isdp->id_irq) { 86 int intrno; 87 88 intrno = ffs(isdp->id_irq)-1; 89 printf("irq %d ", intrno); 90 INTREN(isdp->id_irq); 91 if(mp)INTRMASK(*mp,isdp->id_irq); 92 setidt(ICU_OFFSET+intrno, isdp->id_intr, 93 SDT_SYS386IGT, SEL_KPL); 94 } 95 if (isdp->id_drq != -1) printf("drq %d ", isdp->id_drq); 96 printf("on isa\n"); 97 } 98 return (1); 99 } else return(0); 100 } 101 102 #define IDTVEC(name) __CONCAT(X,name) 103 /* default interrupt vector table */ 104 extern IDTVEC(intr0), IDTVEC(intr1), IDTVEC(intr2), IDTVEC(intr3), 105 IDTVEC(intr4), IDTVEC(intr5), IDTVEC(intr6), IDTVEC(intr7), 106 IDTVEC(intr8), IDTVEC(intr9), IDTVEC(intr10), IDTVEC(intr11), 107 IDTVEC(intr12), IDTVEC(intr13), IDTVEC(intr14), IDTVEC(intr15); 108 109 /* 110 * Fill in default interrupt table (in case of spuruious interrupt 111 * during configuration of kernel, setup interrupt control unit 112 */ 113 isa_defaultirq() { 114 115 /* first icu */ 116 setidt(32, &IDTVEC(intr0), SDT_SYS386IGT, SEL_KPL); 117 setidt(33, &IDTVEC(intr1), SDT_SYS386IGT, SEL_KPL); 118 setidt(34, &IDTVEC(intr2), SDT_SYS386IGT, SEL_KPL); 119 setidt(35, &IDTVEC(intr3), SDT_SYS386IGT, SEL_KPL); 120 setidt(36, &IDTVEC(intr4), SDT_SYS386IGT, SEL_KPL); 121 setidt(37, &IDTVEC(intr5), SDT_SYS386IGT, SEL_KPL); 122 setidt(38, &IDTVEC(intr6), SDT_SYS386IGT, SEL_KPL); 123 setidt(39, &IDTVEC(intr7), SDT_SYS386IGT, SEL_KPL); 124 125 /* second icu */ 126 setidt(40, &IDTVEC(intr8), SDT_SYS386IGT, SEL_KPL); 127 setidt(41, &IDTVEC(intr9), SDT_SYS386IGT, SEL_KPL); 128 setidt(42, &IDTVEC(intr10), SDT_SYS386IGT, SEL_KPL); 129 setidt(43, &IDTVEC(intr11), SDT_SYS386IGT, SEL_KPL); 130 setidt(44, &IDTVEC(intr12), SDT_SYS386IGT, SEL_KPL); 131 setidt(45, &IDTVEC(intr13), SDT_SYS386IGT, SEL_KPL); 132 setidt(46, &IDTVEC(intr14), SDT_SYS386IGT, SEL_KPL); 133 setidt(47, &IDTVEC(intr15), SDT_SYS386IGT, SEL_KPL); 134 135 /* initialize 8259's */ 136 outb(0xf1,0); 137 outb(0x20,0x11); 138 outb(0x21,32); 139 outb(0x21,4); 140 outb(0x21,1); 141 outb(0x21,0xff); 142 143 outb(0xa0,0x11); 144 outb(0xa1,40); 145 outb(0xa1,2); 146 outb(0xa1,1); 147 outb(0xa1,0xff); 148 } 149 150 /* stuff needed for virtual to physical calculations */ 151 152 struct buf *dma_bounce[8]; 153 #define MAXDMASZ 512 154 155 /* XXX temporary crud */ 156 kernel_space(x) 157 unsigned long x; 158 { 159 if (x >= KERNBASE) return 1; 160 else return 0; 161 } 162 163 164 /****************************************************************************/ 165 /* at_dma */ 166 /* set up DMA read/write operation and virtual address addr for nbytes */ 167 /****************************************************************************/ 168 at_dma(read,addr,nbytes, chan) 169 int read; 170 unsigned long addr; 171 int nbytes; 172 { 173 unsigned long phys; 174 int s,raw; 175 caddr_t bounce; 176 177 if (kernel_space(addr)) raw = 0; 178 else raw = 1; 179 180 if(raw) { 181 if (dma_bounce[chan] == 0) 182 dma_bounce[chan] = geteblk(MAXDMASZ); 183 bounce = dma_bounce[chan]->b_un.b_addr; 184 } 185 186 /* copy bounce buffer on write */ 187 if (raw && !read) bcopy(addr,bounce,nbytes); 188 189 /* Set read/write bytes */ 190 if (read) { 191 outb(0xC,0x46); outb(0xB,0x46); 192 } else { 193 outb(0xC,0x4A); outb(0xB,0x4A); 194 } 195 /* Send start address */ 196 if (raw) phys = (unsigned long) bounce; 197 else phys = addr; 198 /* translate to physical */ 199 phys = pmap_extract(kernel_pmap, (vm_offset_t)phys); 200 outb(0x4,phys & 0xFF); 201 outb(0x4,(phys>>8) & 0xFF); 202 outb(0x81,(phys>>16) & 0xFF); 203 /* Send count */ 204 nbytes--; 205 outb(0x5,nbytes & 0xFF); 206 outb(0x5,(nbytes>>8) & 0xFF); 207 /* set channel 2 */ 208 outb(0x0A,chan); 209 } 210 211 /* 212 * Handle a NMI, possibly a machine check. 213 * return true to panic system, false to ignore. 214 */ 215 isa_nmi(cd) { 216 217 log(LOG_CRIT, "\nNMI port 61 %x, port 70 %x\n", inb(0x61), inb(0x70)); 218 return(0); 219 } 220 221 /* 222 * Caught a stray interrupt, notify 223 */ 224 isa_strayintr(d) { 225 226 /* for some reason, we get bursts of intr #7, even if not enabled! */ 227 log(LOG_ERR,"ISA strayintr %d", ffs(d)-1); 228 } 229