1 /** @file 2 The device path protocol as defined in UEFI 2.0. 3 4 The device path represents a programmatic path to a device, 5 from a software point of view. The path must persist from boot to boot, so 6 it can not contain things like PCI bus numbers that change from boot to boot. 7 8 Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR> 9 This program and the accompanying materials are licensed and made available under 10 the terms and conditions of the BSD License that accompanies this distribution. 11 The full text of the license may be found at 12 http://opensource.org/licenses/bsd-license.php. 13 14 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 15 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 16 17 **/ 18 19 #ifndef __EFI_DEVICE_PATH_PROTOCOL_H__ 20 #define __EFI_DEVICE_PATH_PROTOCOL_H__ 21 22 //#include <Guid/PcAnsi.h> 23 24 /// 25 /// Device Path protocol. 26 /// 27 #define EFI_DEVICE_PATH_PROTOCOL_GUID \ 28 { \ 29 0x9576e91, 0x6d3f, 0x11d2, { 0x8e, 0x39, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b } \ 30 } 31 32 /// 33 /// Device Path guid definition for backward-compatible with EFI1.1. 34 /// 35 #define DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH_PROTOCOL_GUID 36 37 #pragma pack(1) 38 39 /** 40 This protocol can be used on any device handle to obtain generic path/location 41 information concerning the physical device or logical device. If the handle does 42 not logically map to a physical device, the handle may not necessarily support 43 the device path protocol. The device path describes the location of the device 44 the handle is for. The size of the Device Path can be determined from the structures 45 that make up the Device Path. 46 **/ 47 typedef struct { 48 UINT8 Type; ///< 0x01 Hardware Device Path. 49 ///< 0x02 ACPI Device Path. 50 ///< 0x03 Messaging Device Path. 51 ///< 0x04 Media Device Path. 52 ///< 0x05 BIOS Boot Specification Device Path. 53 ///< 0x7F End of Hardware Device Path. 54 55 UINT8 SubType; ///< Varies by Type 56 ///< 0xFF End Entire Device Path, or 57 ///< 0x01 End This Instance of a Device Path and start a new 58 ///< Device Path. 59 60 UINT8 Length[2]; ///< Specific Device Path data. Type and Sub-Type define 61 ///< type of data. Size of data is included in Length. 62 63 } EFI_DEVICE_PATH_PROTOCOL; 64 65 /// 66 /// Device Path protocol definition for backward-compatible with EFI1.1. 67 /// 68 typedef EFI_DEVICE_PATH_PROTOCOL EFI_DEVICE_PATH; 69 70 /// 71 /// Hardware Device Paths. 72 /// 73 #define HARDWARE_DEVICE_PATH 0x01 74 75 /// 76 /// PCI Device Path SubType. 77 /// 78 #define HW_PCI_DP 0x01 79 80 /// 81 /// PCI Device Path. 82 /// 83 typedef struct { 84 EFI_DEVICE_PATH_PROTOCOL Header; 85 /// 86 /// PCI Function Number. 87 /// 88 UINT8 Function; 89 /// 90 /// PCI Device Number. 91 /// 92 UINT8 Device; 93 } PCI_DEVICE_PATH; 94 95 /// 96 /// PCCARD Device Path SubType. 97 /// 98 #define HW_PCCARD_DP 0x02 99 100 /// 101 /// PCCARD Device Path. 102 /// 103 typedef struct { 104 EFI_DEVICE_PATH_PROTOCOL Header; 105 /// 106 /// Function Number (0 = First Function). 107 /// 108 UINT8 FunctionNumber; 109 } PCCARD_DEVICE_PATH; 110 111 /// 112 /// Memory Mapped Device Path SubType. 113 /// 114 #define HW_MEMMAP_DP 0x03 115 116 /// 117 /// Memory Mapped Device Path. 118 /// 119 typedef struct { 120 EFI_DEVICE_PATH_PROTOCOL Header; 121 /// 122 /// EFI_MEMORY_TYPE 123 /// 124 UINT32 MemoryType; 125 /// 126 /// Starting Memory Address. 127 /// 128 EFI_PHYSICAL_ADDRESS StartingAddress; 129 /// 130 /// Ending Memory Address. 131 /// 132 EFI_PHYSICAL_ADDRESS EndingAddress; 133 } MEMMAP_DEVICE_PATH; 134 135 /// 136 /// Hardware Vendor Device Path SubType. 137 /// 138 #define HW_VENDOR_DP 0x04 139 140 /// 141 /// The Vendor Device Path allows the creation of vendor-defined Device Paths. A vendor must 142 /// allocate a Vendor GUID for a Device Path. The Vendor GUID can then be used to define the 143 /// contents on the n bytes that follow in the Vendor Device Path node. 144 /// 145 typedef struct { 146 EFI_DEVICE_PATH_PROTOCOL Header; 147 /// 148 /// Vendor-assigned GUID that defines the data that follows. 149 /// 150 EFI_GUID Guid; 151 /// 152 /// Vendor-defined variable size data. 153 /// 154 } VENDOR_DEVICE_PATH; 155 156 /// 157 /// Controller Device Path SubType. 158 /// 159 #define HW_CONTROLLER_DP 0x05 160 161 /// 162 /// Controller Device Path. 163 /// 164 typedef struct { 165 EFI_DEVICE_PATH_PROTOCOL Header; 166 /// 167 /// Controller number. 168 /// 169 UINT32 ControllerNumber; 170 } CONTROLLER_DEVICE_PATH; 171 172 /// 173 /// ACPI Device Paths. 174 /// 175 #define ACPI_DEVICE_PATH 0x02 176 177 /// 178 /// ACPI Device Path SubType. 179 /// 180 #define ACPI_DP 0x01 181 typedef struct { 182 EFI_DEVICE_PATH_PROTOCOL Header; 183 /// 184 /// Device's PnP hardware ID stored in a numeric 32-bit 185 /// compressed EISA-type ID. This value must match the 186 /// corresponding _HID in the ACPI name space. 187 /// 188 UINT32 HID; 189 /// 190 /// Unique ID that is required by ACPI if two devices have the 191 /// same _HID. This value must also match the corresponding 192 /// _UID/_HID pair in the ACPI name space. Only the 32-bit 193 /// numeric value type of _UID is supported. Thus, strings must 194 /// not be used for the _UID in the ACPI name space. 195 /// 196 UINT32 UID; 197 } ACPI_HID_DEVICE_PATH; 198 199 /// 200 /// Expanded ACPI Device Path SubType. 201 /// 202 #define ACPI_EXTENDED_DP 0x02 203 typedef struct { 204 EFI_DEVICE_PATH_PROTOCOL Header; 205 /// 206 /// Device's PnP hardware ID stored in a numeric 32-bit 207 /// compressed EISA-type ID. This value must match the 208 /// corresponding _HID in the ACPI name space. 209 /// 210 UINT32 HID; 211 /// 212 /// Unique ID that is required by ACPI if two devices have the 213 /// same _HID. This value must also match the corresponding 214 /// _UID/_HID pair in the ACPI name space. 215 /// 216 UINT32 UID; 217 /// 218 /// Device's compatible PnP hardware ID stored in a numeric 219 /// 32-bit compressed EISA-type ID. This value must match at 220 /// least one of the compatible device IDs returned by the 221 /// corresponding _CID in the ACPI name space. 222 /// 223 UINT32 CID; 224 /// 225 /// Optional variable length _HIDSTR. 226 /// Optional variable length _UIDSTR. 227 /// Optional variable length _CIDSTR. 228 /// 229 } ACPI_EXTENDED_HID_DEVICE_PATH; 230 231 // 232 // EISA ID Macro 233 // EISA ID Definition 32-bits 234 // bits[15:0] - three character compressed ASCII EISA ID. 235 // bits[31:16] - binary number 236 // Compressed ASCII is 5 bits per character 0b00001 = 'A' 0b11010 = 'Z' 237 // 238 #define PNP_EISA_ID_CONST 0x41d0 239 #define EISA_ID(_Name, _Num) ((UINT32)((_Name) | (_Num) << 16)) 240 #define EISA_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId))) 241 #define EFI_PNP_ID(_PNPId) (EISA_ID(PNP_EISA_ID_CONST, (_PNPId))) 242 243 #define PNP_EISA_ID_MASK 0xffff 244 #define EISA_ID_TO_NUM(_Id) ((_Id) >> 16) 245 246 /// 247 /// ACPI _ADR Device Path SubType. 248 /// 249 #define ACPI_ADR_DP 0x03 250 251 /// 252 /// The _ADR device path is used to contain video output device attributes to support the Graphics 253 /// Output Protocol. The device path can contain multiple _ADR entries if multiple video output 254 /// devices are displaying the same output. 255 /// 256 typedef struct { 257 EFI_DEVICE_PATH_PROTOCOL Header; 258 /// 259 /// _ADR value. For video output devices the value of this 260 /// field comes from Table B-2 of the ACPI 3.0 specification. At 261 /// least one _ADR value is required. 262 /// 263 UINT32 ADR; 264 // 265 // This device path may optionally contain more than one _ADR entry. 266 // 267 } ACPI_ADR_DEVICE_PATH; 268 269 #define ACPI_ADR_DISPLAY_TYPE_OTHER 0 270 #define ACPI_ADR_DISPLAY_TYPE_VGA 1 271 #define ACPI_ADR_DISPLAY_TYPE_TV 2 272 #define ACPI_ADR_DISPLAY_TYPE_EXTERNAL_DIGITAL 3 273 #define ACPI_ADR_DISPLAY_TYPE_INTERNAL_DIGITAL 4 274 275 #define ACPI_DISPLAY_ADR(_DeviceIdScheme, _HeadId, _NonVgaOutput, _BiosCanDetect, _VendorInfo, _Type, _Port, _Index) \ 276 ((UINT32) ((((_DeviceIdScheme) & 0x1) << 31) | \ 277 (((_HeadId) & 0x7) << 18) | \ 278 (((_NonVgaOutput) & 0x1) << 17) | \ 279 (((_BiosCanDetect) & 0x1) << 16) | \ 280 (((_VendorInfo) & 0xf) << 12) | \ 281 (((_Type) & 0xf) << 8) | \ 282 (((_Port) & 0xf) << 4) | \ 283 ((_Index) & 0xf))) 284 285 /// 286 /// Messaging Device Paths. 287 /// This Device Path is used to describe the connection of devices outside the resource domain of the 288 /// system. This Device Path can describe physical messaging information like SCSI ID, or abstract 289 /// information like networking protocol IP addresses. 290 /// 291 #define MESSAGING_DEVICE_PATH 0x03 292 293 /// 294 /// ATAPI Device Path SubType 295 /// 296 #define MSG_ATAPI_DP 0x01 297 typedef struct { 298 EFI_DEVICE_PATH_PROTOCOL Header; 299 /// 300 /// Set to zero for primary, or one for secondary. 301 /// 302 UINT8 PrimarySecondary; 303 /// 304 /// Set to zero for master, or one for slave mode. 305 /// 306 UINT8 SlaveMaster; 307 /// 308 /// Logical Unit Number. 309 /// 310 UINT16 Lun; 311 } ATAPI_DEVICE_PATH; 312 313 /// 314 /// SCSI Device Path SubType. 315 /// 316 #define MSG_SCSI_DP 0x02 317 typedef struct { 318 EFI_DEVICE_PATH_PROTOCOL Header; 319 /// 320 /// Target ID on the SCSI bus (PUN). 321 /// 322 UINT16 Pun; 323 /// 324 /// Logical Unit Number (LUN). 325 /// 326 UINT16 Lun; 327 } SCSI_DEVICE_PATH; 328 329 /// 330 /// Fibre Channel SubType. 331 /// 332 #define MSG_FIBRECHANNEL_DP 0x03 333 typedef struct { 334 EFI_DEVICE_PATH_PROTOCOL Header; 335 /// 336 /// Reserved for the future. 337 /// 338 UINT32 Reserved; 339 /// 340 /// Fibre Channel World Wide Number. 341 /// 342 UINT64 WWN; 343 /// 344 /// Fibre Channel Logical Unit Number. 345 /// 346 UINT64 Lun; 347 } FIBRECHANNEL_DEVICE_PATH; 348 349 /// 350 /// Fibre Channel Ex SubType. 351 /// 352 #define MSG_FIBRECHANNELEX_DP 0x15 353 typedef struct { 354 EFI_DEVICE_PATH_PROTOCOL Header; 355 /// 356 /// Reserved for the future. 357 /// 358 UINT32 Reserved; 359 /// 360 /// 8 byte array containing Fibre Channel End Device Port Name. 361 /// 362 UINT8 WWN[8]; 363 /// 364 /// 8 byte array containing Fibre Channel Logical Unit Number. 365 /// 366 UINT8 Lun[8]; 367 } FIBRECHANNELEX_DEVICE_PATH; 368 369 /// 370 /// 1394 Device Path SubType 371 /// 372 #define MSG_1394_DP 0x04 373 typedef struct { 374 EFI_DEVICE_PATH_PROTOCOL Header; 375 /// 376 /// Reserved for the future. 377 /// 378 UINT32 Reserved; 379 /// 380 /// 1394 Global Unique ID (GUID). 381 /// 382 UINT64 Guid; 383 } F1394_DEVICE_PATH; 384 385 /// 386 /// USB Device Path SubType. 387 /// 388 #define MSG_USB_DP 0x05 389 typedef struct { 390 EFI_DEVICE_PATH_PROTOCOL Header; 391 /// 392 /// USB Parent Port Number. 393 /// 394 UINT8 ParentPortNumber; 395 /// 396 /// USB Interface Number. 397 /// 398 UINT8 InterfaceNumber; 399 } USB_DEVICE_PATH; 400 401 /// 402 /// USB Class Device Path SubType. 403 /// 404 #define MSG_USB_CLASS_DP 0x0f 405 typedef struct { 406 EFI_DEVICE_PATH_PROTOCOL Header; 407 /// 408 /// Vendor ID assigned by USB-IF. A value of 0xFFFF will 409 /// match any Vendor ID. 410 /// 411 UINT16 VendorId; 412 /// 413 /// Product ID assigned by USB-IF. A value of 0xFFFF will 414 /// match any Product ID. 415 /// 416 UINT16 ProductId; 417 /// 418 /// The class code assigned by the USB-IF. A value of 0xFF 419 /// will match any class code. 420 /// 421 UINT8 DeviceClass; 422 /// 423 /// The subclass code assigned by the USB-IF. A value of 424 /// 0xFF will match any subclass code. 425 /// 426 UINT8 DeviceSubClass; 427 /// 428 /// The protocol code assigned by the USB-IF. A value of 429 /// 0xFF will match any protocol code. 430 /// 431 UINT8 DeviceProtocol; 432 } USB_CLASS_DEVICE_PATH; 433 434 /// 435 /// USB WWID Device Path SubType. 436 /// 437 #define MSG_USB_WWID_DP 0x10 438 439 /// 440 /// This device path describes a USB device using its serial number. 441 /// 442 typedef struct { 443 EFI_DEVICE_PATH_PROTOCOL Header; 444 /// 445 /// USB interface number. 446 /// 447 UINT16 InterfaceNumber; 448 /// 449 /// USB vendor id of the device. 450 /// 451 UINT16 VendorId; 452 /// 453 /// USB product id of the device. 454 /// 455 UINT16 ProductId; 456 /// 457 /// Last 64-or-fewer UTF-16 characters of the USB 458 /// serial number. The length of the string is 459 /// determined by the Length field less the offset of the 460 /// Serial Number field (10) 461 /// 462 /// CHAR16 SerialNumber[...]; 463 } USB_WWID_DEVICE_PATH; 464 465 /// 466 /// Device Logical Unit SubType. 467 /// 468 #define MSG_DEVICE_LOGICAL_UNIT_DP 0x11 469 typedef struct { 470 EFI_DEVICE_PATH_PROTOCOL Header; 471 /// 472 /// Logical Unit Number for the interface. 473 /// 474 UINT8 Lun; 475 } DEVICE_LOGICAL_UNIT_DEVICE_PATH; 476 477 /// 478 /// SATA Device Path SubType. 479 /// 480 #define MSG_SATA_DP 0x12 481 typedef struct { 482 EFI_DEVICE_PATH_PROTOCOL Header; 483 /// 484 /// The HBA port number that facilitates the connection to the 485 /// device or a port multiplier. The value 0xFFFF is reserved. 486 /// 487 UINT16 HBAPortNumber; 488 /// 489 /// The Port multiplier port number that facilitates the connection 490 /// to the device. Bit 15 should be set if the device is directly 491 /// connected to the HBA. 492 /// 493 UINT16 PortMultiplierPortNumber; 494 /// 495 /// Logical Unit Number. 496 /// 497 UINT16 Lun; 498 } SATA_DEVICE_PATH; 499 500 /// 501 /// Flag for if the device is directly connected to the HBA. 502 /// 503 #define SATA_HBA_DIRECT_CONNECT_FLAG 0x8000 504 505 /// 506 /// I2O Device Path SubType. 507 /// 508 #define MSG_I2O_DP 0x06 509 typedef struct { 510 EFI_DEVICE_PATH_PROTOCOL Header; 511 /// 512 /// Target ID (TID) for a device. 513 /// 514 UINT32 Tid; 515 } I2O_DEVICE_PATH; 516 517 /// 518 /// MAC Address Device Path SubType. 519 /// 520 #define MSG_MAC_ADDR_DP 0x0b 521 typedef struct { 522 EFI_DEVICE_PATH_PROTOCOL Header; 523 /// 524 /// The MAC address for a network interface padded with 0s. 525 /// 526 EFI_MAC_ADDRESS MacAddress; 527 /// 528 /// Network interface type(i.e. 802.3, FDDI). 529 /// 530 UINT8 IfType; 531 } MAC_ADDR_DEVICE_PATH; 532 533 /// 534 /// IPv4 Device Path SubType 535 /// 536 #define MSG_IPv4_DP 0x0c 537 typedef struct { 538 EFI_DEVICE_PATH_PROTOCOL Header; 539 /// 540 /// The local IPv4 address. 541 /// 542 EFI_IPv4_ADDRESS LocalIpAddress; 543 /// 544 /// The remote IPv4 address. 545 /// 546 EFI_IPv4_ADDRESS RemoteIpAddress; 547 /// 548 /// The local port number. 549 /// 550 UINT16 LocalPort; 551 /// 552 /// The remote port number. 553 /// 554 UINT16 RemotePort; 555 /// 556 /// The network protocol(i.e. UDP, TCP). 557 /// 558 UINT16 Protocol; 559 /// 560 /// 0x00 - The Source IP Address was assigned though DHCP. 561 /// 0x01 - The Source IP Address is statically bound. 562 /// 563 BOOLEAN StaticIpAddress; 564 /// 565 /// The gateway IP address 566 /// 567 EFI_IPv4_ADDRESS GatewayIpAddress; 568 /// 569 /// The subnet mask 570 /// 571 EFI_IPv4_ADDRESS SubnetMask; 572 } IPv4_DEVICE_PATH; 573 574 /// 575 /// IPv6 Device Path SubType. 576 /// 577 #define MSG_IPv6_DP 0x0d 578 typedef struct { 579 EFI_DEVICE_PATH_PROTOCOL Header; 580 /// 581 /// The local IPv6 address. 582 /// 583 EFI_IPv6_ADDRESS LocalIpAddress; 584 /// 585 /// The remote IPv6 address. 586 /// 587 EFI_IPv6_ADDRESS RemoteIpAddress; 588 /// 589 /// The local port number. 590 /// 591 UINT16 LocalPort; 592 /// 593 /// The remote port number. 594 /// 595 UINT16 RemotePort; 596 /// 597 /// The network protocol(i.e. UDP, TCP). 598 /// 599 UINT16 Protocol; 600 /// 601 /// 0x00 - The Local IP Address was manually configured. 602 /// 0x01 - The Local IP Address is assigned through IPv6 603 /// stateless auto-configuration. 604 /// 0x02 - The Local IP Address is assigned through IPv6 605 /// stateful configuration. 606 /// 607 UINT8 IpAddressOrigin; 608 /// 609 /// The prefix length 610 /// 611 UINT8 PrefixLength; 612 /// 613 /// The gateway IP address 614 /// 615 EFI_IPv6_ADDRESS GatewayIpAddress; 616 } IPv6_DEVICE_PATH; 617 618 /// 619 /// InfiniBand Device Path SubType. 620 /// 621 #define MSG_INFINIBAND_DP 0x09 622 typedef struct { 623 EFI_DEVICE_PATH_PROTOCOL Header; 624 /// 625 /// Flags to help identify/manage InfiniBand device path elements: 626 /// Bit 0 - IOC/Service (0b = IOC, 1b = Service). 627 /// Bit 1 - Extend Boot Environment. 628 /// Bit 2 - Console Protocol. 629 /// Bit 3 - Storage Protocol. 630 /// Bit 4 - Network Protocol. 631 /// All other bits are reserved. 632 /// 633 UINT32 ResourceFlags; 634 /// 635 /// 128-bit Global Identifier for remote fabric port. 636 /// 637 UINT8 PortGid[16]; 638 /// 639 /// 64-bit unique identifier to remote IOC or server process. 640 /// Interpretation of field specified by Resource Flags (bit 0). 641 /// 642 UINT64 ServiceId; 643 /// 644 /// 64-bit persistent ID of remote IOC port. 645 /// 646 UINT64 TargetPortId; 647 /// 648 /// 64-bit persistent ID of remote device. 649 /// 650 UINT64 DeviceId; 651 } INFINIBAND_DEVICE_PATH; 652 653 #define INFINIBAND_RESOURCE_FLAG_IOC_SERVICE 0x01 654 #define INFINIBAND_RESOURCE_FLAG_EXTENDED_BOOT_ENVIRONMENT 0x02 655 #define INFINIBAND_RESOURCE_FLAG_CONSOLE_PROTOCOL 0x04 656 #define INFINIBAND_RESOURCE_FLAG_STORAGE_PROTOCOL 0x08 657 #define INFINIBAND_RESOURCE_FLAG_NETWORK_PROTOCOL 0x10 658 659 /// 660 /// UART Device Path SubType. 661 /// 662 #define MSG_UART_DP 0x0e 663 typedef struct { 664 EFI_DEVICE_PATH_PROTOCOL Header; 665 /// 666 /// Reserved. 667 /// 668 UINT32 Reserved; 669 /// 670 /// The baud rate setting for the UART style device. A value of 0 671 /// means that the device's default baud rate will be used. 672 /// 673 UINT64 BaudRate; 674 /// 675 /// The number of data bits for the UART style device. A value 676 /// of 0 means that the device's default number of data bits will be used. 677 /// 678 UINT8 DataBits; 679 /// 680 /// The parity setting for the UART style device. 681 /// Parity 0x00 - Default Parity. 682 /// Parity 0x01 - No Parity. 683 /// Parity 0x02 - Even Parity. 684 /// Parity 0x03 - Odd Parity. 685 /// Parity 0x04 - Mark Parity. 686 /// Parity 0x05 - Space Parity. 687 /// 688 UINT8 Parity; 689 /// 690 /// The number of stop bits for the UART style device. 691 /// Stop Bits 0x00 - Default Stop Bits. 692 /// Stop Bits 0x01 - 1 Stop Bit. 693 /// Stop Bits 0x02 - 1.5 Stop Bits. 694 /// Stop Bits 0x03 - 2 Stop Bits. 695 /// 696 UINT8 StopBits; 697 } UART_DEVICE_PATH; 698 699 // 700 // Use VENDOR_DEVICE_PATH struct 701 // 702 #define MSG_VENDOR_DP 0x0a 703 typedef VENDOR_DEVICE_PATH VENDOR_DEFINED_DEVICE_PATH; 704 705 #define DEVICE_PATH_MESSAGING_PC_ANSI EFI_PC_ANSI_GUID 706 #define DEVICE_PATH_MESSAGING_VT_100 EFI_VT_100_GUID 707 #define DEVICE_PATH_MESSAGING_VT_100_PLUS EFI_VT_100_PLUS_GUID 708 #define DEVICE_PATH_MESSAGING_VT_UTF8 EFI_VT_UTF8_GUID 709 710 /// 711 /// A new device path node is defined to declare flow control characteristics. 712 /// UART Flow Control Messaging Device Path 713 /// 714 typedef struct { 715 EFI_DEVICE_PATH_PROTOCOL Header; 716 /// 717 /// DEVICE_PATH_MESSAGING_UART_FLOW_CONTROL GUID. 718 /// 719 EFI_GUID Guid; 720 /// 721 /// Bitmap of supported flow control types. 722 /// Bit 0 set indicates hardware flow control. 723 /// Bit 1 set indicates Xon/Xoff flow control. 724 /// All other bits are reserved and are clear. 725 /// 726 UINT32 FlowControlMap; 727 } UART_FLOW_CONTROL_DEVICE_PATH; 728 729 #define UART_FLOW_CONTROL_HARDWARE 0x00000001 730 #define UART_FLOW_CONTROL_XON_XOFF 0x00000010 731 732 #define DEVICE_PATH_MESSAGING_SAS EFI_SAS_DEVICE_PATH_GUID 733 /// 734 /// Serial Attached SCSI (SAS) Device Path. 735 /// 736 typedef struct { 737 EFI_DEVICE_PATH_PROTOCOL Header; 738 /// 739 /// DEVICE_PATH_MESSAGING_SAS GUID. 740 /// 741 EFI_GUID Guid; 742 /// 743 /// Reserved for future use. 744 /// 745 UINT32 Reserved; 746 /// 747 /// SAS Address for Serial Attached SCSI Target. 748 /// 749 UINT64 SasAddress; 750 /// 751 /// SAS Logical Unit Number. 752 /// 753 UINT64 Lun; 754 /// 755 /// More Information about the device and its interconnect. 756 /// 757 UINT16 DeviceTopology; 758 /// 759 /// Relative Target Port (RTP). 760 /// 761 UINT16 RelativeTargetPort; 762 } SAS_DEVICE_PATH; 763 764 /// 765 /// Serial Attached SCSI (SAS) Ex Device Path SubType 766 /// 767 #define MSG_SASEX_DP 0x16 768 typedef struct { 769 EFI_DEVICE_PATH_PROTOCOL Header; 770 /// 771 /// 8-byte array of the SAS Address for Serial Attached SCSI Target Port. 772 /// 773 UINT8 SasAddress[8]; 774 /// 775 /// 8-byte array of the SAS Logical Unit Number. 776 /// 777 UINT8 Lun[8]; 778 /// 779 /// More Information about the device and its interconnect. 780 /// 781 UINT16 DeviceTopology; 782 /// 783 /// Relative Target Port (RTP). 784 /// 785 UINT16 RelativeTargetPort; 786 } SASEX_DEVICE_PATH; 787 788 /// 789 /// iSCSI Device Path SubType 790 /// 791 #define MSG_ISCSI_DP 0x13 792 typedef struct { 793 EFI_DEVICE_PATH_PROTOCOL Header; 794 /// 795 /// Network Protocol (0 = TCP, 1+ = reserved). 796 /// 797 UINT16 NetworkProtocol; 798 /// 799 /// iSCSI Login Options. 800 /// 801 UINT16 LoginOption; 802 /// 803 /// iSCSI Logical Unit Number. 804 /// 805 UINT64 Lun; 806 /// 807 /// iSCSI Target Portal group tag the initiator intends 808 /// to establish a session with. 809 /// 810 UINT16 TargetPortalGroupTag; 811 /// 812 /// iSCSI NodeTarget Name. The length of the name 813 /// is determined by subtracting the offset of this field from Length. 814 /// 815 /// CHAR8 iSCSI Target Name. 816 } ISCSI_DEVICE_PATH; 817 818 #define ISCSI_LOGIN_OPTION_NO_HEADER_DIGEST 0x0000 819 #define ISCSI_LOGIN_OPTION_HEADER_DIGEST_USING_CRC32C 0x0002 820 #define ISCSI_LOGIN_OPTION_NO_DATA_DIGEST 0x0000 821 #define ISCSI_LOGIN_OPTION_DATA_DIGEST_USING_CRC32C 0x0008 822 #define ISCSI_LOGIN_OPTION_AUTHMETHOD_CHAP 0x0000 823 #define ISCSI_LOGIN_OPTION_AUTHMETHOD_NON 0x1000 824 #define ISCSI_LOGIN_OPTION_CHAP_BI 0x0000 825 #define ISCSI_LOGIN_OPTION_CHAP_UNI 0x2000 826 827 /// 828 /// VLAN Device Path SubType. 829 /// 830 #define MSG_VLAN_DP 0x14 831 typedef struct { 832 EFI_DEVICE_PATH_PROTOCOL Header; 833 /// 834 /// VLAN identifier (0-4094). 835 /// 836 UINT16 VlanId; 837 } VLAN_DEVICE_PATH; 838 839 // 840 // Media Device Path 841 // 842 #define MEDIA_DEVICE_PATH 0x04 843 844 /// 845 /// Hard Drive Media Device Path SubType. 846 /// 847 #define MEDIA_HARDDRIVE_DP 0x01 848 849 /// 850 /// The Hard Drive Media Device Path is used to represent a partition on a hard drive. 851 /// 852 typedef struct { 853 EFI_DEVICE_PATH_PROTOCOL Header; 854 /// 855 /// Describes the entry in a partition table, starting with entry 1. 856 /// Partition number zero represents the entire device. Valid 857 /// partition numbers for a MBR partition are [1, 4]. Valid 858 /// partition numbers for a GPT partition are [1, NumberOfPartitionEntries]. 859 /// 860 UINT32 PartitionNumber; 861 /// 862 /// Starting LBA of the partition on the hard drive. 863 /// 864 UINT64 PartitionStart; 865 /// 866 /// Size of the partition in units of Logical Blocks. 867 /// 868 UINT64 PartitionSize; 869 /// 870 /// Signature unique to this partition: 871 /// If SignatureType is 0, this field has to be initialized with 16 zeros. 872 /// If SignatureType is 1, the MBR signature is stored in the first 4 bytes of this field. 873 /// The other 12 bytes are initialized with zeros. 874 /// If SignatureType is 2, this field contains a 16 byte signature. 875 /// 876 UINT8 Signature[16]; 877 /// 878 /// Partition Format: (Unused values reserved). 879 /// 0x01 - PC-AT compatible legacy MBR. 880 /// 0x02 - GUID Partition Table. 881 /// 882 UINT8 MBRType; 883 /// 884 /// Type of Disk Signature: (Unused values reserved). 885 /// 0x00 - No Disk Signature. 886 /// 0x01 - 32-bit signature from address 0x1b8 of the type 0x01 MBR. 887 /// 0x02 - GUID signature. 888 /// 889 UINT8 SignatureType; 890 } HARDDRIVE_DEVICE_PATH; 891 892 #define MBR_TYPE_PCAT 0x01 893 #define MBR_TYPE_EFI_PARTITION_TABLE_HEADER 0x02 894 895 #define NO_DISK_SIGNATURE 0x00 896 #define SIGNATURE_TYPE_MBR 0x01 897 #define SIGNATURE_TYPE_GUID 0x02 898 899 /// 900 /// CD-ROM Media Device Path SubType. 901 /// 902 #define MEDIA_CDROM_DP 0x02 903 904 /// 905 /// The CD-ROM Media Device Path is used to define a system partition that exists on a CD-ROM. 906 /// 907 typedef struct { 908 EFI_DEVICE_PATH_PROTOCOL Header; 909 /// 910 /// Boot Entry number from the Boot Catalog. The Initial/Default entry is defined as zero. 911 /// 912 UINT32 BootEntry; 913 /// 914 /// Starting RBA of the partition on the medium. CD-ROMs use Relative logical Block Addressing. 915 /// 916 UINT64 PartitionStart; 917 /// 918 /// Size of the partition in units of Blocks, also called Sectors. 919 /// 920 UINT64 PartitionSize; 921 } CDROM_DEVICE_PATH; 922 923 // 924 // Use VENDOR_DEVICE_PATH struct 925 // 926 #define MEDIA_VENDOR_DP 0x03 ///< Media vendor device path subtype. 927 928 /// 929 /// File Path Media Device Path SubType 930 /// 931 #define MEDIA_FILEPATH_DP 0x04 932 typedef struct { 933 EFI_DEVICE_PATH_PROTOCOL Header; 934 /// 935 /// A NULL-terminated Path string including directory and file names. 936 /// 937 CHAR16 PathName[1]; 938 } FILEPATH_DEVICE_PATH; 939 940 #define SIZE_OF_FILEPATH_DEVICE_PATH OFFSET_OF(FILEPATH_DEVICE_PATH,PathName) 941 942 /// 943 /// Media Protocol Device Path SubType. 944 /// 945 #define MEDIA_PROTOCOL_DP 0x05 946 947 /// 948 /// The Media Protocol Device Path is used to denote the protocol that is being 949 /// used in a device path at the location of the path specified. 950 /// Many protocols are inherent to the style of device path. 951 /// 952 typedef struct { 953 EFI_DEVICE_PATH_PROTOCOL Header; 954 /// 955 /// The ID of the protocol. 956 /// 957 EFI_GUID Protocol; 958 } MEDIA_PROTOCOL_DEVICE_PATH; 959 960 /// 961 /// PIWG Firmware File SubType. 962 /// 963 #define MEDIA_PIWG_FW_FILE_DP 0x06 964 965 /// 966 /// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware file. 967 /// 968 typedef struct { 969 EFI_DEVICE_PATH_PROTOCOL Header; 970 /// 971 /// Firmware file name 972 /// 973 EFI_GUID FvFileName; 974 } MEDIA_FW_VOL_FILEPATH_DEVICE_PATH; 975 976 /// 977 /// PIWG Firmware Volume Device Path SubType. 978 /// 979 #define MEDIA_PIWG_FW_VOL_DP 0x07 980 981 /// 982 /// This device path is used by systems implementing the UEFI PI Specification 1.0 to describe a firmware volume. 983 /// 984 typedef struct { 985 EFI_DEVICE_PATH_PROTOCOL Header; 986 /// 987 /// Firmware volume name. 988 /// 989 EFI_GUID FvName; 990 } MEDIA_FW_VOL_DEVICE_PATH; 991 992 /// 993 /// Media relative offset range device path. 994 /// 995 #define MEDIA_RELATIVE_OFFSET_RANGE_DP 0x08 996 997 /// 998 /// Used to describe the offset range of media relative. 999 /// 1000 typedef struct { 1001 EFI_DEVICE_PATH_PROTOCOL Header; 1002 UINT32 Reserved; 1003 UINT64 StartingOffset; 1004 UINT64 EndingOffset; 1005 } MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH; 1006 1007 /// 1008 /// BIOS Boot Specification Device Path. 1009 /// 1010 #define BBS_DEVICE_PATH 0x05 1011 1012 /// 1013 /// BIOS Boot Specification Device Path SubType. 1014 /// 1015 #define BBS_BBS_DP 0x01 1016 1017 /// 1018 /// This Device Path is used to describe the booting of non-EFI-aware operating systems. 1019 /// 1020 typedef struct { 1021 EFI_DEVICE_PATH_PROTOCOL Header; 1022 /// 1023 /// Device Type as defined by the BIOS Boot Specification. 1024 /// 1025 UINT16 DeviceType; 1026 /// 1027 /// Status Flags as defined by the BIOS Boot Specification. 1028 /// 1029 UINT16 StatusFlag; 1030 /// 1031 /// Null-terminated ASCII string that describes the boot device to a user. 1032 /// 1033 CHAR8 String[1]; 1034 } BBS_BBS_DEVICE_PATH; 1035 1036 // 1037 // DeviceType definitions - from BBS specification 1038 // 1039 #define BBS_TYPE_FLOPPY 0x01 1040 #define BBS_TYPE_HARDDRIVE 0x02 1041 #define BBS_TYPE_CDROM 0x03 1042 #define BBS_TYPE_PCMCIA 0x04 1043 #define BBS_TYPE_USB 0x05 1044 #define BBS_TYPE_EMBEDDED_NETWORK 0x06 1045 #define BBS_TYPE_BEV 0x80 1046 #define BBS_TYPE_UNKNOWN 0xFF 1047 1048 1049 /// 1050 /// Union of all possible Device Paths and pointers to Device Paths. 1051 /// 1052 typedef union { 1053 EFI_DEVICE_PATH_PROTOCOL DevPath; 1054 PCI_DEVICE_PATH Pci; 1055 PCCARD_DEVICE_PATH PcCard; 1056 MEMMAP_DEVICE_PATH MemMap; 1057 VENDOR_DEVICE_PATH Vendor; 1058 1059 CONTROLLER_DEVICE_PATH Controller; 1060 ACPI_HID_DEVICE_PATH Acpi; 1061 ACPI_EXTENDED_HID_DEVICE_PATH ExtendedAcpi; 1062 ACPI_ADR_DEVICE_PATH AcpiAdr; 1063 1064 ATAPI_DEVICE_PATH Atapi; 1065 SCSI_DEVICE_PATH Scsi; 1066 ISCSI_DEVICE_PATH Iscsi; 1067 FIBRECHANNEL_DEVICE_PATH FibreChannel; 1068 FIBRECHANNELEX_DEVICE_PATH FibreChannelEx; 1069 1070 F1394_DEVICE_PATH F1394; 1071 USB_DEVICE_PATH Usb; 1072 SATA_DEVICE_PATH Sata; 1073 USB_CLASS_DEVICE_PATH UsbClass; 1074 USB_WWID_DEVICE_PATH UsbWwid; 1075 DEVICE_LOGICAL_UNIT_DEVICE_PATH LogicUnit; 1076 I2O_DEVICE_PATH I2O; 1077 MAC_ADDR_DEVICE_PATH MacAddr; 1078 IPv4_DEVICE_PATH Ipv4; 1079 IPv6_DEVICE_PATH Ipv6; 1080 VLAN_DEVICE_PATH Vlan; 1081 INFINIBAND_DEVICE_PATH InfiniBand; 1082 UART_DEVICE_PATH Uart; 1083 UART_FLOW_CONTROL_DEVICE_PATH UartFlowControl; 1084 SAS_DEVICE_PATH Sas; 1085 SASEX_DEVICE_PATH SasEx; 1086 HARDDRIVE_DEVICE_PATH HardDrive; 1087 CDROM_DEVICE_PATH CD; 1088 1089 FILEPATH_DEVICE_PATH FilePath; 1090 MEDIA_PROTOCOL_DEVICE_PATH MediaProtocol; 1091 1092 MEDIA_FW_VOL_DEVICE_PATH FirmwareVolume; 1093 MEDIA_FW_VOL_FILEPATH_DEVICE_PATH FirmwareFile; 1094 MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH Offset; 1095 1096 BBS_BBS_DEVICE_PATH Bbs; 1097 } EFI_DEV_PATH; 1098 1099 1100 1101 typedef union { 1102 EFI_DEVICE_PATH_PROTOCOL *DevPath; 1103 PCI_DEVICE_PATH *Pci; 1104 PCCARD_DEVICE_PATH *PcCard; 1105 MEMMAP_DEVICE_PATH *MemMap; 1106 VENDOR_DEVICE_PATH *Vendor; 1107 1108 CONTROLLER_DEVICE_PATH *Controller; 1109 ACPI_HID_DEVICE_PATH *Acpi; 1110 ACPI_EXTENDED_HID_DEVICE_PATH *ExtendedAcpi; 1111 ACPI_ADR_DEVICE_PATH *AcpiAdr; 1112 1113 ATAPI_DEVICE_PATH *Atapi; 1114 SCSI_DEVICE_PATH *Scsi; 1115 ISCSI_DEVICE_PATH *Iscsi; 1116 FIBRECHANNEL_DEVICE_PATH *FibreChannel; 1117 FIBRECHANNELEX_DEVICE_PATH *FibreChannelEx; 1118 1119 F1394_DEVICE_PATH *F1394; 1120 USB_DEVICE_PATH *Usb; 1121 SATA_DEVICE_PATH *Sata; 1122 USB_CLASS_DEVICE_PATH *UsbClass; 1123 USB_WWID_DEVICE_PATH *UsbWwid; 1124 DEVICE_LOGICAL_UNIT_DEVICE_PATH *LogicUnit; 1125 I2O_DEVICE_PATH *I2O; 1126 MAC_ADDR_DEVICE_PATH *MacAddr; 1127 IPv4_DEVICE_PATH *Ipv4; 1128 IPv6_DEVICE_PATH *Ipv6; 1129 VLAN_DEVICE_PATH *Vlan; 1130 INFINIBAND_DEVICE_PATH *InfiniBand; 1131 UART_DEVICE_PATH *Uart; 1132 UART_FLOW_CONTROL_DEVICE_PATH *UartFlowControl; 1133 SAS_DEVICE_PATH *Sas; 1134 SASEX_DEVICE_PATH *SasEx; 1135 HARDDRIVE_DEVICE_PATH *HardDrive; 1136 CDROM_DEVICE_PATH *CD; 1137 1138 FILEPATH_DEVICE_PATH *FilePath; 1139 MEDIA_PROTOCOL_DEVICE_PATH *MediaProtocol; 1140 1141 MEDIA_FW_VOL_DEVICE_PATH *FirmwareVolume; 1142 MEDIA_FW_VOL_FILEPATH_DEVICE_PATH *FirmwareFile; 1143 MEDIA_RELATIVE_OFFSET_RANGE_DEVICE_PATH *Offset; 1144 1145 BBS_BBS_DEVICE_PATH *Bbs; 1146 UINT8 *Raw; 1147 } EFI_DEV_PATH_PTR; 1148 1149 #pragma pack() 1150 1151 #define END_DEVICE_PATH_TYPE 0x7f 1152 #define END_ENTIRE_DEVICE_PATH_SUBTYPE 0xFF 1153 #define END_INSTANCE_DEVICE_PATH_SUBTYPE 0x01 1154 1155 extern EFI_GUID gEfiDevicePathProtocolGuid; 1156 1157 FORCEINLINE 1158 UINT8 1159 DevicePathType ( 1160 _In_ PVOID Node 1161 ) 1162 { 1163 //ASSERT(Node != NULL); 1164 return ((EFI_DEVICE_PATH_PROTOCOL *) (Node))->Type; 1165 } 1166 1167 FORCEINLINE 1168 UINT8 1169 DevicePathSubType ( 1170 _In_ PVOID Node 1171 ) 1172 { 1173 //ASSERT(Node != NULL); 1174 return ((EFI_DEVICE_PATH_PROTOCOL *) (Node))->SubType; 1175 } 1176 1177 FORCEINLINE 1178 UINTN 1179 DevicePathNodeLength ( 1180 _In_ PVOID Node 1181 ) 1182 { 1183 //ASSERT(Node != NULL); 1184 return *((UINT16 *) &((EFI_DEVICE_PATH_PROTOCOL *) (Node))->Length[0]); 1185 } 1186 1187 FORCEINLINE 1188 EFI_DEVICE_PATH_PROTOCOL* 1189 NextDevicePathNode ( 1190 _In_ PVOID Node 1191 ) 1192 { 1193 //ASSERT(Node != NULL); 1194 return (EFI_DEVICE_PATH_PROTOCOL *) ((UINT8 *) (Node) + DevicePathNodeLength(Node)); 1195 } 1196 1197 FORCEINLINE 1198 BOOLEAN 1199 IsDevicePathEndType ( 1200 _In_ PVOID Node 1201 ) 1202 { 1203 //ASSERT(Node != NULL); 1204 return (BOOLEAN) (DevicePathType(Node) == END_DEVICE_PATH_TYPE); 1205 } 1206 1207 FORCEINLINE 1208 BOOLEAN 1209 IsDevicePathEnd( 1210 _In_ PVOID Node 1211 ) 1212 { 1213 //ASSERT(Node != NULL); 1214 return (BOOLEAN) (IsDevicePathEndType(Node) && DevicePathSubType(Node) == END_ENTIRE_DEVICE_PATH_SUBTYPE); 1215 } 1216 1217 #endif 1218