xref: /reactos/drivers/bus/acpi/acpica/executer/exresnte.c (revision 03b24380)

/******************************************************************************
 *
 * Module Name: exresnte - AML Interpreter object resolution
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2022, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include "acpi.h"
#include "accommon.h"
#include "acdispat.h"
#include "acinterp.h"
#include "acnamesp.h"


#define _COMPONENT          ACPI_EXECUTER
        ACPI_MODULE_NAME    ("exresnte")


/*******************************************************************************
 *
 * FUNCTION:    AcpiExResolveNodeToValue
 *
 * PARAMETERS:  ObjectPtr       - Pointer to a location that contains
 *                                a pointer to a NS node, and will receive a
 *                                pointer to the resolved object.
 *              WalkState       - Current state. Valid only if executing AML
 *                                code. NULL if simply resolving an object
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Resolve a Namespace node to a valued object
 *
 * Note: for some of the data types, the pointer attached to the Node
 * can be either a pointer to an actual internal object or a pointer into the
 * AML stream itself. These types are currently:
 *
 *      ACPI_TYPE_INTEGER
 *      ACPI_TYPE_STRING
 *      ACPI_TYPE_BUFFER
 *      ACPI_TYPE_MUTEX
 *      ACPI_TYPE_PACKAGE
 *
 ******************************************************************************/

ACPI_STATUS
AcpiExResolveNodeToValue (
    ACPI_NAMESPACE_NODE     **ObjectPtr,
    ACPI_WALK_STATE         *WalkState)

{
    ACPI_STATUS             Status = AE_OK;
    ACPI_OPERAND_OBJECT     *SourceDesc;
    ACPI_OPERAND_OBJECT     *ObjDesc = NULL;
    ACPI_NAMESPACE_NODE     *Node;
    ACPI_OBJECT_TYPE        EntryType;


    ACPI_FUNCTION_TRACE (ExResolveNodeToValue);


    /*
     * The stack pointer points to a ACPI_NAMESPACE_NODE (Node). Get the
     * object that is attached to the Node.
     */
    Node = *ObjectPtr;
    SourceDesc = AcpiNsGetAttachedObject (Node);
    EntryType = AcpiNsGetType ((ACPI_HANDLE) Node);

    ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Entry=%p SourceDesc=%p [%s]\n",
         Node, SourceDesc, AcpiUtGetTypeName (EntryType)));

    if ((EntryType == ACPI_TYPE_LOCAL_ALIAS) ||
        (EntryType == ACPI_TYPE_LOCAL_METHOD_ALIAS))
    {
        /* There is always exactly one level of indirection */

        Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, Node->Object);
        SourceDesc = AcpiNsGetAttachedObject (Node);
        EntryType = AcpiNsGetType ((ACPI_HANDLE) Node);
        *ObjectPtr = Node;
    }

    /*
     * Several object types require no further processing:
     * 1) Device/Thermal objects don't have a "real" subobject, return Node
     * 2) Method locals and arguments have a pseudo-Node
     * 3) 10/2007: Added method type to assist with Package construction.
     */
    if ((EntryType == ACPI_TYPE_DEVICE)  ||
        (EntryType == ACPI_TYPE_THERMAL) ||
        (EntryType == ACPI_TYPE_METHOD)  ||
        (Node->Flags & (ANOBJ_METHOD_ARG | ANOBJ_METHOD_LOCAL)))
    {
        return_ACPI_STATUS (AE_OK);
    }

    if (!SourceDesc)
    {
        ACPI_ERROR ((AE_INFO, "No object attached to node [%4.4s] %p",
            Node->Name.Ascii, Node));
        return_ACPI_STATUS (AE_AML_UNINITIALIZED_NODE);
    }

    /*
     * Action is based on the type of the Node, which indicates the type
     * of the attached object or pointer
     */
    switch (EntryType)
    {
    case ACPI_TYPE_PACKAGE:

        if (SourceDesc->Common.Type != ACPI_TYPE_PACKAGE)
        {
            ACPI_ERROR ((AE_INFO, "Object not a Package, type %s",
                AcpiUtGetObjectTypeName (SourceDesc)));
            return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
        }

        Status = AcpiDsGetPackageArguments (SourceDesc);
        if (ACPI_SUCCESS (Status))
        {
            /* Return an additional reference to the object */

            ObjDesc = SourceDesc;
            AcpiUtAddReference (ObjDesc);
        }
        break;

    case ACPI_TYPE_BUFFER:

        if (SourceDesc->Common.Type != ACPI_TYPE_BUFFER)
        {
            ACPI_ERROR ((AE_INFO, "Object not a Buffer, type %s",
                AcpiUtGetObjectTypeName (SourceDesc)));
            return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
        }

        Status = AcpiDsGetBufferArguments (SourceDesc);
        if (ACPI_SUCCESS (Status))
        {
            /* Return an additional reference to the object */

            ObjDesc = SourceDesc;
            AcpiUtAddReference (ObjDesc);
        }
        break;

    case ACPI_TYPE_STRING:

        if (SourceDesc->Common.Type != ACPI_TYPE_STRING)
        {
            ACPI_ERROR ((AE_INFO, "Object not a String, type %s",
                AcpiUtGetObjectTypeName (SourceDesc)));
            return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
        }

        /* Return an additional reference to the object */

        ObjDesc = SourceDesc;
        AcpiUtAddReference (ObjDesc);
        break;

    case ACPI_TYPE_INTEGER:

        if (SourceDesc->Common.Type != ACPI_TYPE_INTEGER)
        {
            ACPI_ERROR ((AE_INFO, "Object not a Integer, type %s",
                AcpiUtGetObjectTypeName (SourceDesc)));
            return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
        }

        /* Return an additional reference to the object */

        ObjDesc = SourceDesc;
        AcpiUtAddReference (ObjDesc);
        break;

    case ACPI_TYPE_BUFFER_FIELD:
    case ACPI_TYPE_LOCAL_REGION_FIELD:
    case ACPI_TYPE_LOCAL_BANK_FIELD:
    case ACPI_TYPE_LOCAL_INDEX_FIELD:

        ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
            "FieldRead Node=%p SourceDesc=%p Type=%X\n",
            Node, SourceDesc, EntryType));

        Status = AcpiExReadDataFromField (WalkState, SourceDesc, &ObjDesc);
        break;

    /* For these objects, just return the object attached to the Node */

    case ACPI_TYPE_MUTEX:
    case ACPI_TYPE_POWER:
    case ACPI_TYPE_PROCESSOR:
    case ACPI_TYPE_EVENT:
    case ACPI_TYPE_REGION:

        /* Return an additional reference to the object */

        ObjDesc = SourceDesc;
        AcpiUtAddReference (ObjDesc);
        break;

    /* TYPE_ANY is untyped, and thus there is no object associated with it */

    case ACPI_TYPE_ANY:

        ACPI_ERROR ((AE_INFO,
            "Untyped entry %p, no attached object!", Node));

        return_ACPI_STATUS (AE_AML_OPERAND_TYPE);  /* Cannot be AE_TYPE */

    case ACPI_TYPE_LOCAL_REFERENCE:

        switch (SourceDesc->Reference.Class)
        {
        case ACPI_REFCLASS_TABLE:   /* This is a DdbHandle */
        case ACPI_REFCLASS_REFOF:
        case ACPI_REFCLASS_INDEX:

            /* Return an additional reference to the object */

            ObjDesc = SourceDesc;
            AcpiUtAddReference (ObjDesc);
            break;

        default:

            /* No named references are allowed here */

            ACPI_ERROR ((AE_INFO,
                "Unsupported Reference type 0x%X",
                SourceDesc->Reference.Class));

            return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
        }
        break;

    default:

        /* Default case is for unknown types */

        ACPI_ERROR ((AE_INFO,
            "Node %p - Unknown object type 0x%X",
            Node, EntryType));

        return_ACPI_STATUS (AE_AML_OPERAND_TYPE);

    } /* switch (EntryType) */


    /* Return the object descriptor */

    *ObjectPtr = (void *) ObjDesc;
    return_ACPI_STATUS (Status);
}