1# Makefile.in generated by automake 1.10.2 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright (C) 2003 CSIRO Australia 18# 19# Redistribution and use in source and binary forms, with or without 20# modification, are permitted provided that the following conditions 21# are met: 22# 23# - Redistributions of source code must retain the above copyright 24# notice, this list of conditions and the following disclaimer. 25# 26# - Redistributions in binary form must reproduce the above copyright 27# notice, this list of conditions and the following disclaimer in the 28# documentation and/or other materials provided with the distribution. 29# 30# - Neither the name of the CSIRO nor the names of its 31# contributors may be used to endorse or promote products derived from 32# this software without specific prior written permission. 33# 34# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 35# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 36# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 37# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE ORGANISATION OR 38# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 39# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 40# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 41# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 42# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 43# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 44# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 45 46VPATH = @srcdir@ 47pkgdatadir = $(datadir)/@PACKAGE@ 48pkglibdir = $(libdir)/@PACKAGE@ 49pkgincludedir = $(includedir)/@PACKAGE@ 50am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 51install_sh_DATA = $(install_sh) -c -m 644 52install_sh_PROGRAM = $(install_sh) -c 53install_sh_SCRIPT = $(install_sh) -c 54INSTALL_HEADER = $(INSTALL_DATA) 55transform = $(program_transform_name) 56NORMAL_INSTALL = : 57PRE_INSTALL = : 58POST_INSTALL = : 59NORMAL_UNINSTALL = : 60PRE_UNINSTALL = : 61POST_UNINSTALL = : 62build_triplet = @build@ 63host_triplet = @host@ 64target_triplet = @target@ 65subdir = . 66DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ 67 $(srcdir)/Makefile.in $(srcdir)/config.h.in \ 68 $(srcdir)/fishsound.pc.in $(top_srcdir)/configure AUTHORS \ 69 COPYING ChangeLog INSTALL NEWS config.guess config.sub depcomp \ 70 install-sh ltmain.sh missing 71ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 72am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \ 73 $(top_srcdir)/configure.ac 74am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 75 $(ACLOCAL_M4) 76am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 77 configure.lineno config.status.lineno 78mkinstalldirs = $(install_sh) -d 79CONFIG_HEADER = config.h 80CONFIG_CLEAN_FILES = fishsound.pc 81SOURCES = 82DIST_SOURCES = 83RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 84 html-recursive info-recursive install-data-recursive \ 85 install-dvi-recursive install-exec-recursive \ 86 install-html-recursive install-info-recursive \ 87 install-pdf-recursive install-ps-recursive install-recursive \ 88 installcheck-recursive installdirs-recursive pdf-recursive \ 89 ps-recursive uninstall-recursive 90am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 91am__vpath_adj = case $$p in \ 92 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 93 *) f=$$p;; \ 94 esac; 95am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; 96am__installdirs = "$(DESTDIR)$(pkgconfigdir)" 97pkgconfigDATA_INSTALL = $(INSTALL_DATA) 98DATA = $(pkgconfig_DATA) 99RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 100 distclean-recursive maintainer-clean-recursive 101ETAGS = etags 102CTAGS = ctags 103DIST_SUBDIRS = $(SUBDIRS) 104DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 105distdir = $(PACKAGE)-$(VERSION) 106top_distdir = $(distdir) 107am__remove_distdir = \ 108 { test ! -d $(distdir) \ 109 || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ 110 && rm -fr $(distdir); }; } 111DIST_ARCHIVES = $(distdir).tar.gz 112GZIP_ENV = --best 113distuninstallcheck_listfiles = find . -type f -print 114distcleancheck_listfiles = find . -type f -print 115ACLOCAL = @ACLOCAL@ 116ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ 117AMTAR = @AMTAR@ 118AR = @AR@ 119AUTOCONF = @AUTOCONF@ 120AUTOHEADER = @AUTOHEADER@ 121AUTOMAKE = @AUTOMAKE@ 122AWK = @AWK@ 123BINDIR = @BINDIR@ 124CC = @CC@ 125CCDEPMODE = @CCDEPMODE@ 126CFLAGS = @CFLAGS@ 127CPP = @CPP@ 128CPPFLAGS = @CPPFLAGS@ 129CYGPATH_W = @CYGPATH_W@ 130DEFS = @DEFS@ 131DEPDIR = @DEPDIR@ 132DOCDIR = @DOCDIR@ 133DSYMUTIL = @DSYMUTIL@ 134DUMPBIN = @DUMPBIN@ 135ECHO_C = @ECHO_C@ 136ECHO_N = @ECHO_N@ 137ECHO_T = @ECHO_T@ 138EGREP = @EGREP@ 139EXEEXT = @EXEEXT@ 140FGREP = @FGREP@ 141FLAC_CFLAGS = @FLAC_CFLAGS@ 142FLAC_LIBS = @FLAC_LIBS@ 143GREP = @GREP@ 144HAVE_DOXYGEN = @HAVE_DOXYGEN@ 145HAVE_PKG_CONFIG = @HAVE_PKG_CONFIG@ 146HAVE_VALGRIND = @HAVE_VALGRIND@ 147INCLUDEDIR = @INCLUDEDIR@ 148INSTALL = @INSTALL@ 149INSTALL_DATA = @INSTALL_DATA@ 150INSTALL_PROGRAM = @INSTALL_PROGRAM@ 151INSTALL_SCRIPT = @INSTALL_SCRIPT@ 152INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 153LD = @LD@ 154LDFLAGS = @LDFLAGS@ 155LIBDIR = @LIBDIR@ 156LIBOBJS = @LIBOBJS@ 157LIBS = @LIBS@ 158LIBTOOL = @LIBTOOL@ 159LIPO = @LIPO@ 160LN_S = @LN_S@ 161LTLIBOBJS = @LTLIBOBJS@ 162MAKEINFO = @MAKEINFO@ 163MKDIR_P = @MKDIR_P@ 164NM = @NM@ 165NMEDIT = @NMEDIT@ 166OBJDUMP = @OBJDUMP@ 167OBJEXT = @OBJEXT@ 168OGGZ_CFLAGS = @OGGZ_CFLAGS@ 169OGGZ_LIBS = @OGGZ_LIBS@ 170OTOOL = @OTOOL@ 171OTOOL64 = @OTOOL64@ 172PACKAGE = @PACKAGE@ 173PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 174PACKAGE_NAME = @PACKAGE_NAME@ 175PACKAGE_STRING = @PACKAGE_STRING@ 176PACKAGE_TARNAME = @PACKAGE_TARNAME@ 177PACKAGE_VERSION = @PACKAGE_VERSION@ 178PATH_SEPARATOR = @PATH_SEPARATOR@ 179PKG_CONFIG = @PKG_CONFIG@ 180RANLIB = @RANLIB@ 181SED = @SED@ 182SET_MAKE = @SET_MAKE@ 183SHARED_VERSION_INFO = @SHARED_VERSION_INFO@ 184SHELL = @SHELL@ 185SHLIB_VERSION_ARG = @SHLIB_VERSION_ARG@ 186SNDFILE_CFLAGS = @SNDFILE_CFLAGS@ 187SNDFILE_LIBS = @SNDFILE_LIBS@ 188SPEEX_CFLAGS = @SPEEX_CFLAGS@ 189SPEEX_LIBS = @SPEEX_LIBS@ 190STRIP = @STRIP@ 191VALGRIND_ENVIRONMENT = @VALGRIND_ENVIRONMENT@ 192VERSION = @VERSION@ 193VORBISENC_CFLAGS = @VORBISENC_CFLAGS@ 194VORBISENC_LIBS = @VORBISENC_LIBS@ 195VORBIS_CFLAGS = @VORBIS_CFLAGS@ 196VORBIS_LIBS = @VORBIS_LIBS@ 197abs_builddir = @abs_builddir@ 198abs_srcdir = @abs_srcdir@ 199abs_top_builddir = @abs_top_builddir@ 200abs_top_srcdir = @abs_top_srcdir@ 201ac_ct_CC = @ac_ct_CC@ 202ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 203am__include = @am__include@ 204am__leading_dot = @am__leading_dot@ 205am__quote = @am__quote@ 206am__tar = @am__tar@ 207am__untar = @am__untar@ 208bindir = @bindir@ 209build = @build@ 210build_alias = @build_alias@ 211build_cpu = @build_cpu@ 212build_os = @build_os@ 213build_vendor = @build_vendor@ 214builddir = @builddir@ 215datadir = @datadir@ 216datarootdir = @datarootdir@ 217docdir = @docdir@ 218dvidir = @dvidir@ 219exec_prefix = @exec_prefix@ 220fishsound_pkgdeps = @fishsound_pkgdeps@ 221host = @host@ 222host_alias = @host_alias@ 223host_cpu = @host_cpu@ 224host_os = @host_os@ 225host_vendor = @host_vendor@ 226htmldir = @htmldir@ 227includedir = @includedir@ 228infodir = @infodir@ 229install_sh = @install_sh@ 230libdir = @libdir@ 231libexecdir = @libexecdir@ 232localedir = @localedir@ 233localstatedir = @localstatedir@ 234lt_ECHO = @lt_ECHO@ 235mandir = @mandir@ 236mkdir_p = @mkdir_p@ 237oldincludedir = @oldincludedir@ 238pdfdir = @pdfdir@ 239prefix = @prefix@ 240program_transform_name = @program_transform_name@ 241psdir = @psdir@ 242sbindir = @sbindir@ 243sharedstatedir = @sharedstatedir@ 244srcdir = @srcdir@ 245sysconfdir = @sysconfdir@ 246target = @target@ 247target_alias = @target_alias@ 248target_cpu = @target_cpu@ 249target_os = @target_os@ 250target_vendor = @target_vendor@ 251top_build_prefix = @top_build_prefix@ 252top_builddir = @top_builddir@ 253top_srcdir = @top_srcdir@ 254DISTCHECK_CONFIGURE_FLAGS = --enable-gcc-werror 255SUBDIRS = doc include src 256EXTRA_DIST = fishsound.pc.in README.win32 \ 257 win32/Makefile \ 258 win32/libfishsound/libfishsound.def \ 259 win32/config.h \ 260 win32/libfishsound.dsw \ 261 win32/libfishsound.dsp \ 262 win32/identify.dsp \ 263 win32/decode.dsp \ 264 win32/encode.dsp \ 265 win32/info.dsp \ 266 win32/libfishsound/libfishsound.sln \ 267 win32/libfishsound/libfishsound.vcproj \ 268 symbian/bld.inf \ 269 symbian/config.h \ 270 symbian/libfishsound.mmp 271 272pkgconfigdir = $(prefix)/libdata/pkgconfig 273pkgconfig_DATA = fishsound.pc 274all: config.h 275 $(MAKE) $(AM_MAKEFLAGS) all-recursive 276 277.SUFFIXES: 278am--refresh: 279 @: 280$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 281 @for dep in $?; do \ 282 case '$(am__configure_deps)' in \ 283 *$$dep*) \ 284 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ 285 cd $(srcdir) && $(AUTOMAKE) --gnu \ 286 && exit 0; \ 287 exit 1;; \ 288 esac; \ 289 done; \ 290 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ 291 cd $(top_srcdir) && \ 292 $(AUTOMAKE) --gnu Makefile 293.PRECIOUS: Makefile 294Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 295 @case '$?' in \ 296 *config.status*) \ 297 echo ' $(SHELL) ./config.status'; \ 298 $(SHELL) ./config.status;; \ 299 *) \ 300 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 301 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 302 esac; 303 304$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 305 $(SHELL) ./config.status --recheck 306 307$(top_srcdir)/configure: $(am__configure_deps) 308 cd $(srcdir) && $(AUTOCONF) 309$(ACLOCAL_M4): $(am__aclocal_m4_deps) 310 cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 311 312config.h: stamp-h1 313 @if test ! -f $@; then \ 314 rm -f stamp-h1; \ 315 $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ 316 else :; fi 317 318stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 319 @rm -f stamp-h1 320 cd $(top_builddir) && $(SHELL) ./config.status config.h 321$(srcdir)/config.h.in: $(am__configure_deps) 322 cd $(top_srcdir) && $(AUTOHEADER) 323 rm -f stamp-h1 324 touch $@ 325 326distclean-hdr: 327 -rm -f config.h stamp-h1 328fishsound.pc: $(top_builddir)/config.status $(srcdir)/fishsound.pc.in 329 cd $(top_builddir) && $(SHELL) ./config.status $@ 330 331mostlyclean-libtool: 332 -rm -f *.lo 333 334clean-libtool: 335 -rm -rf .libs _libs 336 337distclean-libtool: 338 -rm -f libtool config.lt 339install-pkgconfigDATA: $(pkgconfig_DATA) 340 @$(NORMAL_INSTALL) 341 test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" 342 @list='$(pkgconfig_DATA)'; for p in $$list; do \ 343 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 344 f=$(am__strip_dir) \ 345 echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ 346 $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ 347 done 348 349uninstall-pkgconfigDATA: 350 @$(NORMAL_UNINSTALL) 351 @list='$(pkgconfig_DATA)'; for p in $$list; do \ 352 f=$(am__strip_dir) \ 353 echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ 354 rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ 355 done 356 357# This directory's subdirectories are mostly independent; you can cd 358# into them and run `make' without going through this Makefile. 359# To change the values of `make' variables: instead of editing Makefiles, 360# (1) if the variable is set in `config.status', edit `config.status' 361# (which will cause the Makefiles to be regenerated when you run `make'); 362# (2) otherwise, pass the desired values on the `make' command line. 363$(RECURSIVE_TARGETS): 364 @failcom='exit 1'; \ 365 for f in x $$MAKEFLAGS; do \ 366 case $$f in \ 367 *=* | --[!k]*);; \ 368 *k*) failcom='fail=yes';; \ 369 esac; \ 370 done; \ 371 dot_seen=no; \ 372 target=`echo $@ | sed s/-recursive//`; \ 373 list='$(SUBDIRS)'; for subdir in $$list; do \ 374 echo "Making $$target in $$subdir"; \ 375 if test "$$subdir" = "."; then \ 376 dot_seen=yes; \ 377 local_target="$$target-am"; \ 378 else \ 379 local_target="$$target"; \ 380 fi; \ 381 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 382 || eval $$failcom; \ 383 done; \ 384 if test "$$dot_seen" = "no"; then \ 385 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 386 fi; test -z "$$fail" 387 388$(RECURSIVE_CLEAN_TARGETS): 389 @failcom='exit 1'; \ 390 for f in x $$MAKEFLAGS; do \ 391 case $$f in \ 392 *=* | --[!k]*);; \ 393 *k*) failcom='fail=yes';; \ 394 esac; \ 395 done; \ 396 dot_seen=no; \ 397 case "$@" in \ 398 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 399 *) list='$(SUBDIRS)' ;; \ 400 esac; \ 401 rev=''; for subdir in $$list; do \ 402 if test "$$subdir" = "."; then :; else \ 403 rev="$$subdir $$rev"; \ 404 fi; \ 405 done; \ 406 rev="$$rev ."; \ 407 target=`echo $@ | sed s/-recursive//`; \ 408 for subdir in $$rev; do \ 409 echo "Making $$target in $$subdir"; \ 410 if test "$$subdir" = "."; then \ 411 local_target="$$target-am"; \ 412 else \ 413 local_target="$$target"; \ 414 fi; \ 415 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 416 || eval $$failcom; \ 417 done && test -z "$$fail" 418tags-recursive: 419 list='$(SUBDIRS)'; for subdir in $$list; do \ 420 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 421 done 422ctags-recursive: 423 list='$(SUBDIRS)'; for subdir in $$list; do \ 424 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 425 done 426 427ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 428 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 429 unique=`for i in $$list; do \ 430 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 431 done | \ 432 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 433 END { if (nonempty) { for (i in files) print i; }; }'`; \ 434 mkid -fID $$unique 435tags: TAGS 436 437TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ 438 $(TAGS_FILES) $(LISP) 439 tags=; \ 440 here=`pwd`; \ 441 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 442 include_option=--etags-include; \ 443 empty_fix=.; \ 444 else \ 445 include_option=--include; \ 446 empty_fix=; \ 447 fi; \ 448 list='$(SUBDIRS)'; for subdir in $$list; do \ 449 if test "$$subdir" = .; then :; else \ 450 test ! -f $$subdir/TAGS || \ 451 tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ 452 fi; \ 453 done; \ 454 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ 455 unique=`for i in $$list; do \ 456 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 457 done | \ 458 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 459 END { if (nonempty) { for (i in files) print i; }; }'`; \ 460 if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ 461 test -n "$$unique" || unique=$$empty_fix; \ 462 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 463 $$tags $$unique; \ 464 fi 465ctags: CTAGS 466CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ 467 $(TAGS_FILES) $(LISP) 468 tags=; \ 469 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ 470 unique=`for i in $$list; do \ 471 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 472 done | \ 473 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 474 END { if (nonempty) { for (i in files) print i; }; }'`; \ 475 test -z "$(CTAGS_ARGS)$$tags$$unique" \ 476 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 477 $$tags $$unique 478 479GTAGS: 480 here=`$(am__cd) $(top_builddir) && pwd` \ 481 && cd $(top_srcdir) \ 482 && gtags -i $(GTAGS_ARGS) $$here 483 484distclean-tags: 485 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 486 487distdir: $(DISTFILES) 488 $(am__remove_distdir) 489 test -d $(distdir) || mkdir $(distdir) 490 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 491 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 492 list='$(DISTFILES)'; \ 493 dist_files=`for file in $$list; do echo $$file; done | \ 494 sed -e "s|^$$srcdirstrip/||;t" \ 495 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 496 case $$dist_files in \ 497 */*) $(MKDIR_P) `echo "$$dist_files" | \ 498 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 499 sort -u` ;; \ 500 esac; \ 501 for file in $$dist_files; do \ 502 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 503 if test -d $$d/$$file; then \ 504 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 505 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 506 cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ 507 fi; \ 508 cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ 509 else \ 510 test -f $(distdir)/$$file \ 511 || cp -p $$d/$$file $(distdir)/$$file \ 512 || exit 1; \ 513 fi; \ 514 done 515 list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 516 if test "$$subdir" = .; then :; else \ 517 test -d "$(distdir)/$$subdir" \ 518 || $(MKDIR_P) "$(distdir)/$$subdir" \ 519 || exit 1; \ 520 distdir=`$(am__cd) $(distdir) && pwd`; \ 521 top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ 522 (cd $$subdir && \ 523 $(MAKE) $(AM_MAKEFLAGS) \ 524 top_distdir="$$top_distdir" \ 525 distdir="$$distdir/$$subdir" \ 526 am__remove_distdir=: \ 527 am__skip_length_check=: \ 528 distdir) \ 529 || exit 1; \ 530 fi; \ 531 done 532 -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ 533 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 534 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 535 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 536 || chmod -R a+r $(distdir) 537dist-gzip: distdir 538 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 539 $(am__remove_distdir) 540 541dist-bzip2: distdir 542 tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 543 $(am__remove_distdir) 544 545dist-lzma: distdir 546 tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma 547 $(am__remove_distdir) 548 549dist-tarZ: distdir 550 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 551 $(am__remove_distdir) 552 553dist-shar: distdir 554 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 555 $(am__remove_distdir) 556 557dist-zip: distdir 558 -rm -f $(distdir).zip 559 zip -rq $(distdir).zip $(distdir) 560 $(am__remove_distdir) 561 562dist dist-all: distdir 563 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 564 $(am__remove_distdir) 565 566# This target untars the dist file and tries a VPATH configuration. Then 567# it guarantees that the distribution is self-contained by making another 568# tarfile. 569distcheck: dist 570 case '$(DIST_ARCHIVES)' in \ 571 *.tar.gz*) \ 572 GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ 573 *.tar.bz2*) \ 574 bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ 575 *.tar.lzma*) \ 576 unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ 577 *.tar.Z*) \ 578 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 579 *.shar.gz*) \ 580 GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ 581 *.zip*) \ 582 unzip $(distdir).zip ;;\ 583 esac 584 chmod -R a-w $(distdir); chmod a+w $(distdir) 585 mkdir $(distdir)/_build 586 mkdir $(distdir)/_inst 587 chmod a-w $(distdir) 588 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 589 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 590 && cd $(distdir)/_build \ 591 && ../configure --srcdir=.. --prefix="$$dc_install_base" \ 592 $(DISTCHECK_CONFIGURE_FLAGS) \ 593 && $(MAKE) $(AM_MAKEFLAGS) \ 594 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 595 && $(MAKE) $(AM_MAKEFLAGS) check \ 596 && $(MAKE) $(AM_MAKEFLAGS) install \ 597 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 598 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 599 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 600 distuninstallcheck \ 601 && chmod -R a-w "$$dc_install_base" \ 602 && ({ \ 603 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 604 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 605 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 606 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 607 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 608 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 609 && rm -rf "$$dc_destdir" \ 610 && $(MAKE) $(AM_MAKEFLAGS) dist \ 611 && rm -rf $(DIST_ARCHIVES) \ 612 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck 613 $(am__remove_distdir) 614 @(echo "$(distdir) archives ready for distribution: "; \ 615 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 616 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 617distuninstallcheck: 618 @cd $(distuninstallcheck_dir) \ 619 && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ 620 || { echo "ERROR: files left after uninstall:" ; \ 621 if test -n "$(DESTDIR)"; then \ 622 echo " (check DESTDIR support)"; \ 623 fi ; \ 624 $(distuninstallcheck_listfiles) ; \ 625 exit 1; } >&2 626distcleancheck: distclean 627 @if test '$(srcdir)' = . ; then \ 628 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 629 exit 1 ; \ 630 fi 631 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 632 || { echo "ERROR: files left in build directory after distclean:" ; \ 633 $(distcleancheck_listfiles) ; \ 634 exit 1; } >&2 635check-am: all-am 636check: check-recursive 637all-am: Makefile $(DATA) config.h 638installdirs: installdirs-recursive 639installdirs-am: 640 for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ 641 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 642 done 643install: install-recursive 644install-exec: install-exec-recursive 645install-data: install-data-recursive 646uninstall: uninstall-recursive 647 648install-am: all-am 649 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 650 651installcheck: installcheck-recursive 652install-strip: 653 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 654 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 655 `test -z '$(STRIP)' || \ 656 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install 657mostlyclean-generic: 658 659clean-generic: 660 661distclean-generic: 662 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 663 664maintainer-clean-generic: 665 @echo "This command is intended for maintainers to use" 666 @echo "it deletes files that may require special tools to rebuild." 667clean: clean-recursive 668 669clean-am: clean-generic clean-libtool mostlyclean-am 670 671distclean: distclean-recursive 672 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 673 -rm -f Makefile 674distclean-am: clean-am distclean-generic distclean-hdr \ 675 distclean-libtool distclean-tags 676 677dvi: dvi-recursive 678 679dvi-am: 680 681html: html-recursive 682 683info: info-recursive 684 685info-am: 686 687install-data-am: install-pkgconfigDATA 688 689install-dvi: install-dvi-recursive 690 691install-exec-am: 692 693install-html: install-html-recursive 694 695install-info: install-info-recursive 696 697install-man: 698 699install-pdf: install-pdf-recursive 700 701install-ps: install-ps-recursive 702 703installcheck-am: 704 705maintainer-clean: maintainer-clean-recursive 706 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 707 -rm -rf $(top_srcdir)/autom4te.cache 708 -rm -f Makefile 709maintainer-clean-am: distclean-am maintainer-clean-generic 710 711mostlyclean: mostlyclean-recursive 712 713mostlyclean-am: mostlyclean-generic mostlyclean-libtool 714 715pdf: pdf-recursive 716 717pdf-am: 718 719ps: ps-recursive 720 721ps-am: 722 723uninstall-am: uninstall-pkgconfigDATA 724 725.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ 726 install-strip 727 728.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ 729 all all-am am--refresh check check-am clean clean-generic \ 730 clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ 731 dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \ 732 distclean distclean-generic distclean-hdr distclean-libtool \ 733 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 734 dvi-am html html-am info info-am install install-am \ 735 install-data install-data-am install-dvi install-dvi-am \ 736 install-exec install-exec-am install-html install-html-am \ 737 install-info install-info-am install-man install-pdf \ 738 install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ 739 install-strip installcheck installcheck-am installdirs \ 740 installdirs-am maintainer-clean maintainer-clean-generic \ 741 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ 742 ps ps-am tags tags-recursive uninstall uninstall-am \ 743 uninstall-pkgconfigDATA 744 745# Tell versions [3.59,3.63) of GNU make to not export all variables. 746# Otherwise a system limit (for SysV at least) may be exceeded. 747.NOEXPORT: 748