1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# settings common to all Makefile.ams
18
19VPATH = @srcdir@
20am__is_gnu_make = { \
21  if test -z '$(MAKELEVEL)'; then \
22    false; \
23  elif test -n '$(MAKE_HOST)'; then \
24    true; \
25  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
26    true; \
27  else \
28    false; \
29  fi; \
30}
31am__make_running_with_option = \
32  case $${target_option-} in \
33      ?) ;; \
34      *) echo "am__make_running_with_option: internal error: invalid" \
35              "target option '$${target_option-}' specified" >&2; \
36         exit 1;; \
37  esac; \
38  has_opt=no; \
39  sane_makeflags=$$MAKEFLAGS; \
40  if $(am__is_gnu_make); then \
41    sane_makeflags=$$MFLAGS; \
42  else \
43    case $$MAKEFLAGS in \
44      *\\[\ \	]*) \
45        bs=\\; \
46        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
47          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
48    esac; \
49  fi; \
50  skip_next=no; \
51  strip_trailopt () \
52  { \
53    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
54  }; \
55  for flg in $$sane_makeflags; do \
56    test $$skip_next = yes && { skip_next=no; continue; }; \
57    case $$flg in \
58      *=*|--*) continue;; \
59        -*I) strip_trailopt 'I'; skip_next=yes;; \
60      -*I?*) strip_trailopt 'I';; \
61        -*O) strip_trailopt 'O'; skip_next=yes;; \
62      -*O?*) strip_trailopt 'O';; \
63        -*l) strip_trailopt 'l'; skip_next=yes;; \
64      -*l?*) strip_trailopt 'l';; \
65      -[dEDm]) skip_next=yes;; \
66      -[JT]) skip_next=yes;; \
67    esac; \
68    case $$flg in \
69      *$$target_option*) has_opt=yes; break;; \
70    esac; \
71  done; \
72  test $$has_opt = yes
73am__make_dryrun = (target_option=n; $(am__make_running_with_option))
74am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
75pkgdatadir = $(datadir)/@PACKAGE@
76pkgincludedir = $(includedir)/@PACKAGE@
77pkglibdir = $(libdir)/@PACKAGE@
78pkglibexecdir = $(libexecdir)/@PACKAGE@
79am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
80install_sh_DATA = $(install_sh) -c -m 644
81install_sh_PROGRAM = $(install_sh) -c
82install_sh_SCRIPT = $(install_sh) -c
83INSTALL_HEADER = $(INSTALL_DATA)
84transform = $(program_transform_name)
85NORMAL_INSTALL = :
86PRE_INSTALL = :
87POST_INSTALL = :
88NORMAL_UNINSTALL = :
89PRE_UNINSTALL = :
90POST_UNINSTALL = :
91build_triplet = @build@
92host_triplet = @host@
93subdir = src
94ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
95am__aclocal_m4_deps = $(top_srcdir)/configure.ac
96am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
97	$(ACLOCAL_M4)
98DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
99	$(am__DIST_COMMON)
100mkinstalldirs = $(install_sh) -d
101CONFIG_HEADER = config.h
102CONFIG_CLEAN_FILES =
103CONFIG_CLEAN_VPATH_FILES =
104AM_V_P = $(am__v_P_@AM_V@)
105am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
106am__v_P_0 = false
107am__v_P_1 = :
108AM_V_GEN = $(am__v_GEN_@AM_V@)
109am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
110am__v_GEN_0 = @echo "  GEN     " $@;
111am__v_GEN_1 =
112AM_V_at = $(am__v_at_@AM_V@)
113am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
114am__v_at_0 = @
115am__v_at_1 =
116SOURCES =
117DIST_SOURCES =
118RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
119	ctags-recursive dvi-recursive html-recursive info-recursive \
120	install-data-recursive install-dvi-recursive \
121	install-exec-recursive install-html-recursive \
122	install-info-recursive install-pdf-recursive \
123	install-ps-recursive install-recursive installcheck-recursive \
124	installdirs-recursive pdf-recursive ps-recursive \
125	tags-recursive uninstall-recursive
126am__can_run_installinfo = \
127  case $$AM_UPDATE_INFO_DIR in \
128    n|no|NO) false;; \
129    *) (install-info --version) >/dev/null 2>&1;; \
130  esac
131HEADERS = $(noinst_HEADERS)
132RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
133  distclean-recursive maintainer-clean-recursive
134am__recursive_targets = \
135  $(RECURSIVE_TARGETS) \
136  $(RECURSIVE_CLEAN_TARGETS) \
137  $(am__extra_recursive_targets)
138AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
139	distdir
140am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
141	$(LISP)config.h.in
142# Read a list of newline-separated strings from the standard input,
143# and print each of them once, without duplicates.  Input order is
144# *not* preserved.
145am__uniquify_input = $(AWK) '\
146  BEGIN { nonempty = 0; } \
147  { items[$$0] = 1; nonempty = 1; } \
148  END { if (nonempty) { for (i in items) print i; }; } \
149'
150# Make sure the list of sources is unique.  This is necessary because,
151# e.g., the same source file might be shared among _SOURCES variables
152# for different programs/libraries.
153am__define_uniq_tagged_files = \
154  list='$(am__tagged_files)'; \
155  unique=`for i in $$list; do \
156    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
157  done | $(am__uniquify_input)`
158ETAGS = etags
159CTAGS = ctags
160DIST_SUBDIRS = $(SUBDIRS)
161am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
162	$(top_srcdir)/common.am
163DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
164am__relativize = \
165  dir0=`pwd`; \
166  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
167  sed_rest='s,^[^/]*/*,,'; \
168  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
169  sed_butlast='s,/*[^/]*$$,,'; \
170  while test -n "$$dir1"; do \
171    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
172    if test "$$first" != "."; then \
173      if test "$$first" = ".."; then \
174        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
175        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
176      else \
177        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
178        if test "$$first2" = "$$first"; then \
179          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
180        else \
181          dir2="../$$dir2"; \
182        fi; \
183        dir0="$$dir0"/"$$first"; \
184      fi; \
185    fi; \
186    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
187  done; \
188  reldir="$$dir2"
189ACLOCAL = @ACLOCAL@
190AMTAR = @AMTAR@
191AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
192AR = @AR@
193ARFLAGS = @ARFLAGS@
194AR_FLAGS = @AR_FLAGS@
195AUTOCONF = @AUTOCONF@
196AUTOHEADER = @AUTOHEADER@
197AUTOMAKE = @AUTOMAKE@
198AWK = @AWK@
199CC = @CC@
200CCDEPMODE = @CCDEPMODE@
201CFLAGS = @CFLAGS@
202CPP = @CPP@
203CPPFLAGS = @CPPFLAGS@
204CXX = @CXX@
205CXXCPP = @CXXCPP@
206CXXDEPMODE = @CXXDEPMODE@
207CXXFLAGS = @CXXFLAGS@
208CYGPATH_W = @CYGPATH_W@
209DEFS = @DEFS@
210DEPDIR = @DEPDIR@
211DLLTOOL = @DLLTOOL@
212DSYMUTIL = @DSYMUTIL@
213DUMPBIN = @DUMPBIN@
214ECHO_C = @ECHO_C@
215ECHO_N = @ECHO_N@
216ECHO_T = @ECHO_T@
217EGREP = @EGREP@
218EXEEXT = @EXEEXT@
219FGREP = @FGREP@
220GREP = @GREP@
221HELP2MAN = @HELP2MAN@
222INSTALL = @INSTALL@
223INSTALL_DATA = @INSTALL_DATA@
224INSTALL_PROGRAM = @INSTALL_PROGRAM@
225INSTALL_SCRIPT = @INSTALL_SCRIPT@
226INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
227KRB5CONFIG = @KRB5CONFIG@
228LD = @LD@
229LDFLAGS = @LDFLAGS@
230LDFLAG_RDYNAMIC = @LDFLAG_RDYNAMIC@
231LIBLDNS_CFLAGS = @LIBLDNS_CFLAGS@
232LIBLDNS_CONFIG = @LIBLDNS_CONFIG@
233LIBLDNS_LIBS = @LIBLDNS_LIBS@
234LIBOBJS = @LIBOBJS@
235LIBS = @LIBS@
236LIBTOOL = @LIBTOOL@
237LIB_CURSES = @LIB_CURSES@
238LIB_DL = @LIB_DL@
239LIPO = @LIPO@
240LN_S = @LN_S@
241LTLIBOBJS = @LTLIBOBJS@
242LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
243MAINT = @MAINT@
244MAKEINFO = @MAKEINFO@
245MANIFEST_TOOL = @MANIFEST_TOOL@
246MKDIR_P = @MKDIR_P@
247NM = @NM@
248NMEDIT = @NMEDIT@
249OBJDUMP = @OBJDUMP@
250OBJEXT = @OBJEXT@
251OTOOL = @OTOOL@
252OTOOL64 = @OTOOL64@
253PACKAGE = @PACKAGE@
254PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
255PACKAGE_NAME = @PACKAGE_NAME@
256PACKAGE_STRING = @PACKAGE_STRING@
257PACKAGE_TARNAME = @PACKAGE_TARNAME@
258PACKAGE_URL = @PACKAGE_URL@
259PACKAGE_VERSION = @PACKAGE_VERSION@
260PATH_SEPARATOR = @PATH_SEPARATOR@
261PKG_CONFIG = @PKG_CONFIG@
262PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
263PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
264RANLIB = @RANLIB@
265SED = @SED@
266SET_MAKE = @SET_MAKE@
267SHELL = @SHELL@
268STRIP = @STRIP@
269VERSION = @VERSION@
270abs_builddir = @abs_builddir@
271abs_srcdir = @abs_srcdir@
272abs_top_builddir = @abs_top_builddir@
273abs_top_srcdir = @abs_top_srcdir@
274ac_ct_AR = @ac_ct_AR@
275ac_ct_CC = @ac_ct_CC@
276ac_ct_CXX = @ac_ct_CXX@
277ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
278am__include = @am__include@
279am__leading_dot = @am__leading_dot@
280am__quote = @am__quote@
281am__tar = @am__tar@
282am__untar = @am__untar@
283bindir = @bindir@
284build = @build@
285build_alias = @build_alias@
286build_cpu = @build_cpu@
287build_os = @build_os@
288build_vendor = @build_vendor@
289builddir = @builddir@
290datadir = @datadir@
291datarootdir = @datarootdir@
292docdir = @docdir@
293dvidir = @dvidir@
294exec_prefix = @exec_prefix@
295host = @host@
296host_alias = @host_alias@
297host_cpu = @host_cpu@
298host_os = @host_os@
299host_vendor = @host_vendor@
300htmldir = @htmldir@
301includedir = @includedir@
302infodir = @infodir@
303install_sh = @install_sh@
304libdir = @libdir@
305libexecdir = @libexecdir@
306localedir = @localedir@
307localstatedir = @localstatedir@
308mandir = @mandir@
309mkdir_p = @mkdir_p@
310oldincludedir = @oldincludedir@
311pdfdir = @pdfdir@
312prefix = @prefix@
313program_transform_name = @program_transform_name@
314psdir = @psdir@
315runstatedir = @runstatedir@
316sbindir = @sbindir@
317sharedstatedir = @sharedstatedir@
318srcdir = @srcdir@
319std_include = @std_include@
320sysconfdir = @sysconfdir@
321target_alias = @target_alias@
322top_build_prefix = @top_build_prefix@
323top_builddir = @top_builddir@
324top_srcdir = @top_srcdir@
325SUBDIRS = \
326	xstd \
327	base \
328	xml \
329	app \
330	beep \
331	icp \
332	kerberos \
333	runtime \
334	xparser \
335	pgl \
336	csm \
337	dns \
338	cache \
339	server \
340	client \
341	logextractors \
342	loganalyzers \
343	tools \
344	probe \
345	monitor
346
347noinst_HEADERS = post-config.h
348javascriptsdir = $(pkgdatadir)/javascripts
349stylesheetsdir = $(pkgdatadir)/stylesheets
350stylesheets_imagesdir = $(pkgdatadir)/stylesheets/images
351
352# top_builddir/src/ is needed for generated src/config.h and src/xstd/h/stdint.h
353AM_CPPFLAGS = \
354	-DDATA_DIR=\"$(pkgdatadir)\" \
355	-I$(top_builddir)/src \
356	-I$(top_srcdir)/src
357
358all: config.h
359	$(MAKE) $(AM_MAKEFLAGS) all-recursive
360
361.SUFFIXES:
362$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/common.am $(am__configure_deps)
363	@for dep in $?; do \
364	  case '$(am__configure_deps)' in \
365	    *$$dep*) \
366	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
367	        && { if test -f $@; then exit 0; else break; fi; }; \
368	      exit 1;; \
369	  esac; \
370	done; \
371	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
372	$(am__cd) $(top_srcdir) && \
373	  $(AUTOMAKE) --foreign src/Makefile
374Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
375	@case '$?' in \
376	  *config.status*) \
377	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
378	  *) \
379	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
380	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
381	esac;
382$(top_srcdir)/common.am $(am__empty):
383
384$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
385	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
386
387$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
388	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
389$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
390	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
391$(am__aclocal_m4_deps):
392
393config.h: stamp-h1
394	@test -f $@ || rm -f stamp-h1
395	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
396
397stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
398	@rm -f stamp-h1
399	cd $(top_builddir) && $(SHELL) ./config.status src/config.h
400$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
401	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
402	rm -f stamp-h1
403	touch $@
404
405distclean-hdr:
406	-rm -f config.h stamp-h1
407
408mostlyclean-libtool:
409	-rm -f *.lo
410
411clean-libtool:
412	-rm -rf .libs _libs
413
414# This directory's subdirectories are mostly independent; you can cd
415# into them and run 'make' without going through this Makefile.
416# To change the values of 'make' variables: instead of editing Makefiles,
417# (1) if the variable is set in 'config.status', edit 'config.status'
418#     (which will cause the Makefiles to be regenerated when you run 'make');
419# (2) otherwise, pass the desired values on the 'make' command line.
420$(am__recursive_targets):
421	@fail=; \
422	if $(am__make_keepgoing); then \
423	  failcom='fail=yes'; \
424	else \
425	  failcom='exit 1'; \
426	fi; \
427	dot_seen=no; \
428	target=`echo $@ | sed s/-recursive//`; \
429	case "$@" in \
430	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
431	  *) list='$(SUBDIRS)' ;; \
432	esac; \
433	for subdir in $$list; do \
434	  echo "Making $$target in $$subdir"; \
435	  if test "$$subdir" = "."; then \
436	    dot_seen=yes; \
437	    local_target="$$target-am"; \
438	  else \
439	    local_target="$$target"; \
440	  fi; \
441	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
442	  || eval $$failcom; \
443	done; \
444	if test "$$dot_seen" = "no"; then \
445	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
446	fi; test -z "$$fail"
447
448ID: $(am__tagged_files)
449	$(am__define_uniq_tagged_files); mkid -fID $$unique
450tags: tags-recursive
451TAGS: tags
452
453tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
454	set x; \
455	here=`pwd`; \
456	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
457	  include_option=--etags-include; \
458	  empty_fix=.; \
459	else \
460	  include_option=--include; \
461	  empty_fix=; \
462	fi; \
463	list='$(SUBDIRS)'; for subdir in $$list; do \
464	  if test "$$subdir" = .; then :; else \
465	    test ! -f $$subdir/TAGS || \
466	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
467	  fi; \
468	done; \
469	$(am__define_uniq_tagged_files); \
470	shift; \
471	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
472	  test -n "$$unique" || unique=$$empty_fix; \
473	  if test $$# -gt 0; then \
474	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
475	      "$$@" $$unique; \
476	  else \
477	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
478	      $$unique; \
479	  fi; \
480	fi
481ctags: ctags-recursive
482
483CTAGS: ctags
484ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
485	$(am__define_uniq_tagged_files); \
486	test -z "$(CTAGS_ARGS)$$unique" \
487	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
488	     $$unique
489
490GTAGS:
491	here=`$(am__cd) $(top_builddir) && pwd` \
492	  && $(am__cd) $(top_srcdir) \
493	  && gtags -i $(GTAGS_ARGS) "$$here"
494cscopelist: cscopelist-recursive
495
496cscopelist-am: $(am__tagged_files)
497	list='$(am__tagged_files)'; \
498	case "$(srcdir)" in \
499	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
500	  *) sdir=$(subdir)/$(srcdir) ;; \
501	esac; \
502	for i in $$list; do \
503	  if test -f "$$i"; then \
504	    echo "$(subdir)/$$i"; \
505	  else \
506	    echo "$$sdir/$$i"; \
507	  fi; \
508	done >> $(top_builddir)/cscope.files
509
510distclean-tags:
511	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
512
513distdir: $(DISTFILES)
514	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
515	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
516	list='$(DISTFILES)'; \
517	  dist_files=`for file in $$list; do echo $$file; done | \
518	  sed -e "s|^$$srcdirstrip/||;t" \
519	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
520	case $$dist_files in \
521	  */*) $(MKDIR_P) `echo "$$dist_files" | \
522			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
523			   sort -u` ;; \
524	esac; \
525	for file in $$dist_files; do \
526	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
527	  if test -d $$d/$$file; then \
528	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
529	    if test -d "$(distdir)/$$file"; then \
530	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
531	    fi; \
532	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
533	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
534	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
535	    fi; \
536	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
537	  else \
538	    test -f "$(distdir)/$$file" \
539	    || cp -p $$d/$$file "$(distdir)/$$file" \
540	    || exit 1; \
541	  fi; \
542	done
543	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
544	  if test "$$subdir" = .; then :; else \
545	    $(am__make_dryrun) \
546	      || test -d "$(distdir)/$$subdir" \
547	      || $(MKDIR_P) "$(distdir)/$$subdir" \
548	      || exit 1; \
549	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
550	    $(am__relativize); \
551	    new_distdir=$$reldir; \
552	    dir1=$$subdir; dir2="$(top_distdir)"; \
553	    $(am__relativize); \
554	    new_top_distdir=$$reldir; \
555	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
556	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
557	    ($(am__cd) $$subdir && \
558	      $(MAKE) $(AM_MAKEFLAGS) \
559	        top_distdir="$$new_top_distdir" \
560	        distdir="$$new_distdir" \
561		am__remove_distdir=: \
562		am__skip_length_check=: \
563		am__skip_mode_fix=: \
564	        distdir) \
565	      || exit 1; \
566	  fi; \
567	done
568check-am: all-am
569check: check-recursive
570all-am: Makefile $(HEADERS) config.h
571installdirs: installdirs-recursive
572installdirs-am:
573install: install-recursive
574install-exec: install-exec-recursive
575install-data: install-data-recursive
576uninstall: uninstall-recursive
577
578install-am: all-am
579	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
580
581installcheck: installcheck-recursive
582install-strip:
583	if test -z '$(STRIP)'; then \
584	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
585	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
586	      install; \
587	else \
588	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
589	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
590	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
591	fi
592mostlyclean-generic:
593
594clean-generic:
595
596distclean-generic:
597	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
598	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
599
600maintainer-clean-generic:
601	@echo "This command is intended for maintainers to use"
602	@echo "it deletes files that may require special tools to rebuild."
603clean: clean-recursive
604
605clean-am: clean-generic clean-libtool mostlyclean-am
606
607distclean: distclean-recursive
608	-rm -f Makefile
609distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
610
611dvi: dvi-recursive
612
613dvi-am:
614
615html: html-recursive
616
617html-am:
618
619info: info-recursive
620
621info-am:
622
623install-data-am:
624
625install-dvi: install-dvi-recursive
626
627install-dvi-am:
628
629install-exec-am:
630
631install-html: install-html-recursive
632
633install-html-am:
634
635install-info: install-info-recursive
636
637install-info-am:
638
639install-man:
640
641install-pdf: install-pdf-recursive
642
643install-pdf-am:
644
645install-ps: install-ps-recursive
646
647install-ps-am:
648
649installcheck-am:
650
651maintainer-clean: maintainer-clean-recursive
652	-rm -f Makefile
653maintainer-clean-am: distclean-am maintainer-clean-generic
654
655mostlyclean: mostlyclean-recursive
656
657mostlyclean-am: mostlyclean-generic mostlyclean-libtool
658
659pdf: pdf-recursive
660
661pdf-am:
662
663ps: ps-recursive
664
665ps-am:
666
667uninstall-am:
668
669.MAKE: $(am__recursive_targets) all install-am install-strip
670
671.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
672	check-am clean clean-generic clean-libtool cscopelist-am ctags \
673	ctags-am distclean distclean-generic distclean-hdr \
674	distclean-libtool distclean-tags distdir dvi dvi-am html \
675	html-am info info-am install install-am install-data \
676	install-data-am install-dvi install-dvi-am install-exec \
677	install-exec-am install-html install-html-am install-info \
678	install-info-am install-man install-pdf install-pdf-am \
679	install-ps install-ps-am install-strip installcheck \
680	installcheck-am installdirs installdirs-am maintainer-clean \
681	maintainer-clean-generic mostlyclean mostlyclean-generic \
682	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
683	uninstall-am
684
685.PRECIOUS: Makefile
686
687
688#AM_LDFLAGS =
689#imported_libs =
690
691@ENABLE_MANPAGES_GEN_TRUE@manpages-am: @top_srcdir@/common.h2m
692@ENABLE_MANPAGES_GEN_TRUE@	@for binary in $(bin_PROGRAMS) $(dist_bin_SCRIPTS); do \
693@ENABLE_MANPAGES_GEN_TRUE@		echo "Generating manpage for $$binary"; \
694@ENABLE_MANPAGES_GEN_TRUE@		manpage=`echo -n "$$binary" | sed -e 's/\..*//'`; \
695@ENABLE_MANPAGES_GEN_TRUE@		name=`(grep \
696@ENABLE_MANPAGES_GEN_TRUE@				--after-context=1 \
697@ENABLE_MANPAGES_GEN_TRUE@				".B \\\\\%polygraph-$$manpage" \
698@ENABLE_MANPAGES_GEN_TRUE@				'@top_srcdir@/polygraph.man.in' || \
699@ENABLE_MANPAGES_GEN_TRUE@			echo -n '   a part of Web Polygraph performance benchmark') | \
700@ENABLE_MANPAGES_GEN_TRUE@			tail -1 | cut -c4-`; \
701@ENABLE_MANPAGES_GEN_TRUE@		$(HELP2MAN) \
702@ENABLE_MANPAGES_GEN_TRUE@			--no-info \
703@ENABLE_MANPAGES_GEN_TRUE@			--name="$$name" \
704@ENABLE_MANPAGES_GEN_TRUE@			--version-string="polygraph-$$manpage - $(PACKAGE_NAME)" \
705@ENABLE_MANPAGES_GEN_TRUE@			--include='@top_srcdir@/common.h2m' \
706@ENABLE_MANPAGES_GEN_TRUE@			--opt-include="$$manpage.h2m" \
707@ENABLE_MANPAGES_GEN_TRUE@			--output="$$manpage.man" \
708@ENABLE_MANPAGES_GEN_TRUE@			"./$$binary";\
709@ENABLE_MANPAGES_GEN_TRUE@	done
710@ENABLE_MANPAGES_GEN_TRUE@	@if test 'x$(RECURSIVE_TARGETS)' != 'xmanpages-recursive' ; then \
711@ENABLE_MANPAGES_GEN_TRUE@		$(MAKE) \
712@ENABLE_MANPAGES_GEN_TRUE@			$(AM_MAKEFLAGS) \
713@ENABLE_MANPAGES_GEN_TRUE@			RECURSIVE_TARGETS=manpages-recursive \
714@ENABLE_MANPAGES_GEN_TRUE@			manpages-recursive; \
715@ENABLE_MANPAGES_GEN_TRUE@	fi
716
717@ENABLE_MANPAGES_GEN_TRUE@manpages-recursive:
718
719@ENABLE_MANPAGES_GEN_TRUE@manpages: Makefile $(LIBRARIES) $(PROGRAMS) manpages-am manpages-recursive
720
721@ENABLE_MANPAGES_GEN_TRUE@manpagesclean-am:
722@ENABLE_MANPAGES_GEN_TRUE@	@rm -f $(dist_man1_MANS)
723@ENABLE_MANPAGES_GEN_TRUE@	@if test 'x$(RECURSIVE_TARGETS)' != 'xmanpagesclean-recursive' ; then \
724@ENABLE_MANPAGES_GEN_TRUE@		$(MAKE) \
725@ENABLE_MANPAGES_GEN_TRUE@			$(AM_MAKEFLAGS) \
726@ENABLE_MANPAGES_GEN_TRUE@			RECURSIVE_TARGETS=manpagesclean-recursive \
727@ENABLE_MANPAGES_GEN_TRUE@			manpagesclean-recursive; \
728@ENABLE_MANPAGES_GEN_TRUE@	fi
729
730@ENABLE_MANPAGES_GEN_TRUE@manpagesclean-recursive:
731
732@ENABLE_MANPAGES_GEN_TRUE@manpagesclean: manpagesclean-am manpagesclean-recursive
733
734@ENABLE_MANPAGES_GEN_TRUE@.PHONY: manpages-am manpages-recursive manpages \
735@ENABLE_MANPAGES_GEN_TRUE@	manpagesclean-am manpagesclean-recursive manpagesclean
736
737@ENABLE_MANPAGES_GEN_FALSE@manpages:
738@ENABLE_MANPAGES_GEN_FALSE@	@echo "Can not generate man pages. Please install help2man and reconfigure."
739
740@ENABLE_MANPAGES_GEN_FALSE@manpagesclean:
741@ENABLE_MANPAGES_GEN_FALSE@	@echo "Can not generate man pages. Please install help2man and reconfigure."
742
743@ENABLE_MANPAGES_GEN_FALSE@.PHONY: manpages manpagesclean
744
745# Tell versions [3.59,3.63) of GNU make to not export all variables.
746# Otherwise a system limit (for SysV at least) may be exceeded.
747.NOEXPORT:
748