1{ 2 "version": 2, 3 "name": "Tevo Tarantula Pro", 4 "inherits": "fdmprinter", 5 "metadata": { 6 "visible": true, 7 "author": "FN59", 8 "manufacturer": "Tevo", 9 "file_formats": "text/x-gcode", 10 "platform": "tevo_tarantula_pro_platform.3mf", 11 "has_materials": true, 12 "machine_extruder_trains": 13 { 14 "0": "tevo_tarantula_pro_extruder_0", 15 "1": "tevo_tarantula_pro_extruder_1" 16 } 17 }, 18 19 "overrides": { 20 "machine_name": { "default_value": "Tevo Tarantula Pro" }, 21 "machine_heated_bed": { "default_value": true }, 22 "machine_width": { "default_value": 240 }, 23 "machine_height": { "default_value": 260 }, 24 "machine_depth": { "default_value": 240 }, 25 "machine_center_is_zero": { "default_value": false }, 26 "layer_height": { "default_value": 0.15 }, 27 "retraction_amount": { "default_value": 4.5 }, 28 "retraction_speed": { "default_value": 35 }, 29 "adhesion_type": { "default_value": "brim" }, 30 "machine_head_with_fans_polygon": { "default_value": [[-42,29],[42,29],[42,-55],[-42,-55]] }, 31 "gantry_height": { "value": "32" }, 32 "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, 33 "machine_acceleration": { "default_value": 2000 }, 34 "machine_max_jerk_xy": { "default_value": 15.0 }, 35 "machine_max_jerk_z": { "default_value": 0.4 }, 36 "machine_max_jerk_e": { "default_value": 5 }, 37 "machine_max_feedrate_x": { "default_value": 200 }, 38 "machine_max_feedrate_y": { "default_value": 200 }, 39 "machine_max_feedrate_z": { "default_value": 9 }, 40 "machine_max_acceleration_x": { "default_value": 2000 }, 41 "machine_max_acceleration_y": { "default_value": 2000 }, 42 "acceleration_print": { "default_value": 2000 }, 43 "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z30.0 F9000 ;move the gentry up 30mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." }, 44 "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y220 F3600 ;move extruder out of the way by moving the baseplate to the front for easier access to printed object\nM84 ;steppers off" } 45 } 46} 47