1Basic Installation 2================== 3 4 These are generic installation instructions. 5 6 The `configure' shell script attempts to guess correct values for 7various system-dependent variables used during compilation. It uses 8those values to create a `Makefile' in each directory of the package. 9It may also create one or more `.h' files containing system-dependent 10definitions. Finally, it creates a shell script `config.status' that 11you can run in the future to recreate the current configuration, a file 12`config.cache' that saves the results of its tests to speed up 13reconfiguring, and a file `config.log' containing compiler output 14(useful mainly for debugging `configure'). 15 16 If you need to do unusual things to compile the package, please try 17to figure out how `configure' could check whether to do them, and mail 18diffs or instructions to the address given in the `README' so they can 19be considered for the next release. If at some point `config.cache' 20contains results you don't want to keep, you may remove or edit it. 21 22 The file `configure.in' is used to create `configure' by a program 23called `autoconf'. You only need `configure.in' if you want to change 24it or regenerate `configure' using a newer version of `autoconf'. 25 26The simplest way to compile this package is: 27 28 1. `cd' to the directory containing the package's source code and type 29 `./configure' to configure the package for your system. If you're 30 using `csh' on an old version of System V, you might need to type 31 `sh ./configure' instead to prevent `csh' from trying to execute 32 `configure' itself. 33 34 Running `configure' takes awhile. While running, it prints some 35 messages telling which features it is checking for. 36 37 2. Type `make' to compile the package. 38 39 3. Optionally, type `make check' to run any self-tests that come with 40 the package. 41 42 4. Type `make install' to install the programs and any data files and 43 documentation. 44 45 5. You can remove the program binaries and object files from the 46 source code directory by typing `make clean'. To also remove the 47 files that `configure' created (so you can compile the package for 48 a different kind of computer), type `make distclean'. There is 49 also a `make maintainer-clean' target, but that is intended mainly 50 for the package's developers. If you use it, you may have to get 51 all sorts of other programs in order to regenerate files that came 52 with the distribution. 53 54Compilers and Options 55===================== 56 57 Some systems require unusual options for compilation or linking that 58the `configure' script does not know about. You can give `configure' 59initial values for variables by setting them in the environment. Using 60a Bourne-compatible shell, you can do that on the command line like 61this: 62 CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure 63 64Or on systems that have the `env' program, you can do it like this: 65 env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure 66 67Compiling For Multiple Architectures 68==================================== 69 70 You can compile the package for more than one kind of computer at the 71same time, by placing the object files for each architecture in their 72own directory. To do this, you must use a version of `make' that 73supports the `VPATH' variable, such as GNU `make'. `cd' to the 74directory where you want the object files and executables to go and run 75the `configure' script. `configure' automatically checks for the 76source code in the directory that `configure' is in and in `..'. 77 78 If you have to use a `make' that does not supports the `VPATH' 79variable, you have to compile the package for one architecture at a time 80in the source code directory. After you have installed the package for 81one architecture, use `make distclean' before reconfiguring for another 82architecture. 83 84Installation Names 85================== 86 87 By default, `make install' will install the package's files in 88`/usr/local/bin', `/usr/local/man', etc. You can specify an 89installation prefix other than `/usr/local' by giving `configure' the 90option `--prefix=PATH'. 91 92 You can specify separate installation prefixes for 93architecture-specific files and architecture-independent files. If you 94give `configure' the option `--exec-prefix=PATH', the package will use 95PATH as the prefix for installing programs and libraries. 96Documentation and other data files will still use the regular prefix. 97 98 In addition, if you use an unusual directory layout you can give 99options like `--bindir=PATH' to specify different values for particular 100kinds of files. Run `configure --help' for a list of the directories 101you can set and what kinds of files go in them. 102 103 If the package supports it, you can cause programs to be installed 104with an extra prefix or suffix on their names by giving `configure' the 105option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. 106 107Optional Features 108================= 109 110 Some packages pay attention to `--enable-FEATURE' options to 111`configure', where FEATURE indicates an optional part of the package. 112They may also pay attention to `--with-PACKAGE' options, where PACKAGE 113is something like `gnu-as' or `x' (for the X Window System). The 114`README' should mention any `--enable-' and `--with-' options that the 115package recognizes. 116 117 For packages that use the X Window System, `configure' can usually 118find the X include and library files automatically, but if it doesn't, 119you can use the `configure' options `--x-includes=DIR' and 120`--x-libraries=DIR' to specify their locations. 121 122Specifying the System Type 123========================== 124 125 There may be some features `configure' can not figure out 126automatically, but needs to determine by the type of host the package 127will run on. Usually `configure' can figure that out, but if it prints 128a message saying it can not guess the host type, give it the 129`--host=TYPE' option. TYPE can either be a short name for the system 130type, such as `sun4', or a canonical name with three fields: 131 CPU-COMPANY-SYSTEM 132 133See the file `config.sub' for the possible values of each field. If 134`config.sub' isn't included in this package, then this package doesn't 135need to know the host type. 136 137 If you are building compiler tools for cross-compiling, you can also 138use the `--target=TYPE' option to select the type of system they will 139produce code for and the `--build=TYPE' option to select the type of 140system on which you are compiling the package. 141 142Sharing Defaults 143================ 144 145 If you want to set default values for `configure' scripts to share, 146you can create a site shell script called `config.site' that gives 147default values for variables like `CC', `cache_file', and `prefix'. 148`configure' looks for `PREFIX/share/config.site' if it exists, then 149`PREFIX/etc/config.site' if it exists. Or, you can set the 150`CONFIG_SITE' environment variable to the location of the site script. 151A warning: not all `configure' scripts look for a site script. 152 153Operation Controls 154================== 155 156 `configure' recognizes the following options to control how it 157operates. 158 159`--cache-file=FILE' 160 Use and save the results of the tests in FILE instead of 161 `./config.cache'. Set FILE to `/dev/null' to disable caching, for 162 debugging `configure'. 163 164`--help' 165 Print a summary of the options to `configure', and exit. 166 167`--quiet' 168`--silent' 169`-q' 170 Do not print messages saying which checks are being made. To 171 suppress all normal output, redirect it to `/dev/null' (any error 172 messages will still be shown). 173 174`--srcdir=DIR' 175 Look for the package's source code in directory DIR. Usually 176 `configure' can determine that directory automatically. 177 178`--version' 179 Print the version of Autoconf used to generate the `configure' 180 script, and exit. 181 182`configure' also accepts some other, not widely useful, options. 183