1 /**
2  * \file sha512.h
3  * \brief This file contains SHA-384 and SHA-512 definitions and functions.
4  *
5  * The Secure Hash Algorithms 384 and 512 (SHA-384 and SHA-512) cryptographic
6  * hash functions are defined in <em>FIPS 180-4: Secure Hash Standard (SHS)</em>.
7  */
8 /*
9  *  Copyright The Mbed TLS Contributors
10  *  SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later
11  *
12  *  This file is provided under the Apache License 2.0, or the
13  *  GNU General Public License v2.0 or later.
14  *
15  *  **********
16  *  Apache License 2.0:
17  *
18  *  Licensed under the Apache License, Version 2.0 (the "License"); you may
19  *  not use this file except in compliance with the License.
20  *  You may obtain a copy of the License at
21  *
22  *  http://www.apache.org/licenses/LICENSE-2.0
23  *
24  *  Unless required by applicable law or agreed to in writing, software
25  *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
26  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
27  *  See the License for the specific language governing permissions and
28  *  limitations under the License.
29  *
30  *  **********
31  *
32  *  **********
33  *  GNU General Public License v2.0 or later:
34  *
35  *  This program is free software; you can redistribute it and/or modify
36  *  it under the terms of the GNU General Public License as published by
37  *  the Free Software Foundation; either version 2 of the License, or
38  *  (at your option) any later version.
39  *
40  *  This program is distributed in the hope that it will be useful,
41  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
42  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
43  *  GNU General Public License for more details.
44  *
45  *  You should have received a copy of the GNU General Public License along
46  *  with this program; if not, write to the Free Software Foundation, Inc.,
47  *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
48  *
49  *  **********
50  */
51 #ifndef MBEDTLS_SHA512_H
52 #define MBEDTLS_SHA512_H
53 
54 #if !defined(MBEDTLS_CONFIG_FILE)
55 #include "config.h"
56 #else
57 #include MBEDTLS_CONFIG_FILE
58 #endif
59 
60 #include <stddef.h>
61 #include <stdint.h>
62 
63 /* MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED is deprecated and should not be used. */
64 #define MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED                -0x0039  /**< SHA-512 hardware accelerator failed */
65 #define MBEDTLS_ERR_SHA512_BAD_INPUT_DATA                 -0x0075  /**< SHA-512 input data was malformed. */
66 
67 #ifdef __cplusplus
68 extern "C" {
69 #endif
70 
71 #if !defined(MBEDTLS_SHA512_ALT)
72 // Regular implementation
73 //
74 
75 /**
76  * \brief          The SHA-512 context structure.
77  *
78  *                 The structure is used both for SHA-384 and for SHA-512
79  *                 checksum calculations. The choice between these two is
80  *                 made in the call to mbedtls_sha512_starts_ret().
81  */
82 typedef struct mbedtls_sha512_context
83 {
84     uint64_t total[2];          /*!< The number of Bytes processed. */
85     uint64_t state[8];          /*!< The intermediate digest state. */
86     unsigned char buffer[128];  /*!< The data block being processed. */
87     int is384;                  /*!< Determines which function to use:
88                                      0: Use SHA-512, or 1: Use SHA-384. */
89 }
90 mbedtls_sha512_context;
91 
92 #else  /* MBEDTLS_SHA512_ALT */
93 #include "sha512_alt.h"
94 #endif /* MBEDTLS_SHA512_ALT */
95 
96 /**
97  * \brief          This function initializes a SHA-512 context.
98  *
99  * \param ctx      The SHA-512 context to initialize. This must
100  *                 not be \c NULL.
101  */
102 void mbedtls_sha512_init( mbedtls_sha512_context *ctx );
103 
104 /**
105  * \brief          This function clears a SHA-512 context.
106  *
107  * \param ctx      The SHA-512 context to clear. This may be \c NULL,
108  *                 in which case this function does nothing. If it
109  *                 is not \c NULL, it must point to an initialized
110  *                 SHA-512 context.
111  */
112 void mbedtls_sha512_free( mbedtls_sha512_context *ctx );
113 
114 /**
115  * \brief          This function clones the state of a SHA-512 context.
116  *
117  * \param dst      The destination context. This must be initialized.
118  * \param src      The context to clone. This must be initialized.
119  */
120 void mbedtls_sha512_clone( mbedtls_sha512_context *dst,
121                            const mbedtls_sha512_context *src );
122 
123 /**
124  * \brief          This function starts a SHA-384 or SHA-512 checksum
125  *                 calculation.
126  *
127  * \param ctx      The SHA-512 context to use. This must be initialized.
128  * \param is384    Determines which function to use. This must be
129  *                 either \c for SHA-512, or \c 1 for SHA-384.
130  *
131  * \return         \c 0 on success.
132  * \return         A negative error code on failure.
133  */
134 int mbedtls_sha512_starts_ret( mbedtls_sha512_context *ctx, int is384 );
135 
136 /**
137  * \brief          This function feeds an input buffer into an ongoing
138  *                 SHA-512 checksum calculation.
139  *
140  * \param ctx      The SHA-512 context. This must be initialized
141  *                 and have a hash operation started.
142  * \param input    The buffer holding the input data. This must
143  *                 be a readable buffer of length \p ilen Bytes.
144  * \param ilen     The length of the input data in Bytes.
145  *
146  * \return         \c 0 on success.
147  * \return         A negative error code on failure.
148  */
149 int mbedtls_sha512_update_ret( mbedtls_sha512_context *ctx,
150                     const unsigned char *input,
151                     size_t ilen );
152 
153 /**
154  * \brief          This function finishes the SHA-512 operation, and writes
155  *                 the result to the output buffer. This function is for
156  *                 internal use only.
157  *
158  * \param ctx      The SHA-512 context. This must be initialized
159  *                 and have a hash operation started.
160  * \param output   The SHA-384 or SHA-512 checksum result.
161  *                 This must be a writable buffer of length \c 64 Bytes.
162  *
163  * \return         \c 0 on success.
164  * \return         A negative error code on failure.
165  */
166 int mbedtls_sha512_finish_ret( mbedtls_sha512_context *ctx,
167                                unsigned char output[64] );
168 
169 /**
170  * \brief          This function processes a single data block within
171  *                 the ongoing SHA-512 computation.
172  *
173  * \param ctx      The SHA-512 context. This must be initialized.
174  * \param data     The buffer holding one block of data. This
175  *                 must be a readable buffer of length \c 128 Bytes.
176  *
177  * \return         \c 0 on success.
178  * \return         A negative error code on failure.
179  */
180 int mbedtls_internal_sha512_process( mbedtls_sha512_context *ctx,
181                                      const unsigned char data[128] );
182 #if !defined(MBEDTLS_DEPRECATED_REMOVED)
183 #if defined(MBEDTLS_DEPRECATED_WARNING)
184 #define MBEDTLS_DEPRECATED      __attribute__((deprecated))
185 #else
186 #define MBEDTLS_DEPRECATED
187 #endif
188 /**
189  * \brief          This function starts a SHA-384 or SHA-512 checksum
190  *                 calculation.
191  *
192  * \deprecated     Superseded by mbedtls_sha512_starts_ret() in 2.7.0
193  *
194  * \param ctx      The SHA-512 context to use. This must be initialized.
195  * \param is384    Determines which function to use. This must be either
196  *                 \c 0 for SHA-512 or \c 1 for SHA-384.
197  */
198 MBEDTLS_DEPRECATED void mbedtls_sha512_starts( mbedtls_sha512_context *ctx,
199                                                int is384 );
200 
201 /**
202  * \brief          This function feeds an input buffer into an ongoing
203  *                 SHA-512 checksum calculation.
204  *
205  * \deprecated     Superseded by mbedtls_sha512_update_ret() in 2.7.0.
206  *
207  * \param ctx      The SHA-512 context. This must be initialized
208  *                 and have a hash operation started.
209  * \param input    The buffer holding the data. This must be a readable
210  *                 buffer of length \p ilen Bytes.
211  * \param ilen     The length of the input data in Bytes.
212  */
213 MBEDTLS_DEPRECATED void mbedtls_sha512_update( mbedtls_sha512_context *ctx,
214                                                const unsigned char *input,
215                                                size_t ilen );
216 
217 /**
218  * \brief          This function finishes the SHA-512 operation, and writes
219  *                 the result to the output buffer.
220  *
221  * \deprecated     Superseded by mbedtls_sha512_finish_ret() in 2.7.0.
222  *
223  * \param ctx      The SHA-512 context. This must be initialized
224  *                 and have a hash operation started.
225  * \param output   The SHA-384 or SHA-512 checksum result. This must
226  *                 be a writable buffer of size \c 64 Bytes.
227  */
228 MBEDTLS_DEPRECATED void mbedtls_sha512_finish( mbedtls_sha512_context *ctx,
229                                                unsigned char output[64] );
230 
231 /**
232  * \brief          This function processes a single data block within
233  *                 the ongoing SHA-512 computation. This function is for
234  *                 internal use only.
235  *
236  * \deprecated     Superseded by mbedtls_internal_sha512_process() in 2.7.0.
237  *
238  * \param ctx      The SHA-512 context. This must be initialized.
239  * \param data     The buffer holding one block of data. This must be
240  *                 a readable buffer of length \c 128 Bytes.
241  */
242 MBEDTLS_DEPRECATED void mbedtls_sha512_process(
243                                             mbedtls_sha512_context *ctx,
244                                             const unsigned char data[128] );
245 
246 #undef MBEDTLS_DEPRECATED
247 #endif /* !MBEDTLS_DEPRECATED_REMOVED */
248 
249 /**
250  * \brief          This function calculates the SHA-512 or SHA-384
251  *                 checksum of a buffer.
252  *
253  *                 The function allocates the context, performs the
254  *                 calculation, and frees the context.
255  *
256  *                 The SHA-512 result is calculated as
257  *                 output = SHA-512(input buffer).
258  *
259  * \param input    The buffer holding the input data. This must be
260  *                 a readable buffer of length \p ilen Bytes.
261  * \param ilen     The length of the input data in Bytes.
262  * \param output   The SHA-384 or SHA-512 checksum result.
263  *                 This must be a writable buffer of length \c 64 Bytes.
264  * \param is384    Determines which function to use. This must be either
265  *                 \c 0 for SHA-512, or \c 1 for SHA-384.
266  *
267  * \return         \c 0 on success.
268  * \return         A negative error code on failure.
269  */
270 int mbedtls_sha512_ret( const unsigned char *input,
271                         size_t ilen,
272                         unsigned char output[64],
273                         int is384 );
274 
275 #if !defined(MBEDTLS_DEPRECATED_REMOVED)
276 #if defined(MBEDTLS_DEPRECATED_WARNING)
277 #define MBEDTLS_DEPRECATED      __attribute__((deprecated))
278 #else
279 #define MBEDTLS_DEPRECATED
280 #endif
281 
282 /**
283  * \brief          This function calculates the SHA-512 or SHA-384
284  *                 checksum of a buffer.
285  *
286  *                 The function allocates the context, performs the
287  *                 calculation, and frees the context.
288  *
289  *                 The SHA-512 result is calculated as
290  *                 output = SHA-512(input buffer).
291  *
292  * \deprecated     Superseded by mbedtls_sha512_ret() in 2.7.0
293  *
294  * \param input    The buffer holding the data. This must be a
295  *                 readable buffer of length \p ilen Bytes.
296  * \param ilen     The length of the input data in Bytes.
297  * \param output   The SHA-384 or SHA-512 checksum result. This must
298  *                 be a writable buffer of length \c 64 Bytes.
299  * \param is384    Determines which function to use. This must be either
300  *                 \c 0 for SHA-512, or \c 1 for SHA-384.
301  */
302 MBEDTLS_DEPRECATED void mbedtls_sha512( const unsigned char *input,
303                                         size_t ilen,
304                                         unsigned char output[64],
305                                         int is384 );
306 
307 #undef MBEDTLS_DEPRECATED
308 #endif /* !MBEDTLS_DEPRECATED_REMOVED */
309 
310 #if defined(MBEDTLS_SELF_TEST)
311 
312  /**
313  * \brief          The SHA-384 or SHA-512 checkup routine.
314  *
315  * \return         \c 0 on success.
316  * \return         \c 1 on failure.
317  */
318 int mbedtls_sha512_self_test( int verbose );
319 #endif /* MBEDTLS_SELF_TEST */
320 
321 #ifdef __cplusplus
322 }
323 #endif
324 
325 #endif /* mbedtls_sha512.h */
326