1# ======================================================================== 2# Copyright 2008-2011 Mark Crispin 3# ======================================================================== 4# 5 6# Program: IMAP Toolkit Makefile 7# 8# Author: Mark Crispin 9# 10# Date: 7 December 1989 11# Last Edited: 15 April 2013 (jonabbey@arlut.utexas.edu) 12# 13# Previous versions of this file were 14# 15# Copyright 1988-2008 University of Washington 16# 17# Licensed under the Apache License, Version 2.0 (the "License"); 18# you may not use this file except in compliance with the License. 19# You may obtain a copy of the License at 20# 21# http://www.apache.org/licenses/LICENSE-2.0 22 23 24# Normal command to build IMAP toolkit: 25# make <port> [EXTRAAUTHENTICATORS=xxx] [EXTRADRIVERS=xxx] [EXTRACFLAGS=xxx] 26# [PASSWDTYPE=xxx] [SSLTYPE=xxx] [IP=n] 27 28 29# Port name. These refer to the *standard* compiler on the given system. 30# This means, for example, that the hpx port is for HP's compiler and not for 31# a non-standard compiler such as gcc. 32# 33# If you are using gcc and it is not the standard compiler on your system, try 34# using an ANSI port that is close to what you have. For example, if your 35# system is SVR4ish, try a32 or lnx; if it's more BSDish, try nxt, mct, or bsi. 36# 37# The following ports are bundled: 38# a32 AIX 3.2 for RS/6000 39# a41 AIX 4.1 for RS/6000 40# a52 AIX 5.2 41# aix AIX/370 (not RS/6000!!) 42# ami AmigaDOS 43# am2 AmigaDOS with a 68020+ 44# ama AmigaDOS using AS225R2 45# amn AmigaDOS with a 680x0 using "new" socket library 46# aos AOS for RT 47# art AIX 2.2.1 for RT 48# asv Altos SVR4 49# aux A/UX 50# bs3 BSD/i386 3.0 and higher 51# bsd generic BSD 4.3 (as in ancient 1980s version) 52# bsf FreeBSD 53# bsi BSD/i386 54# bso OpenBSD (yes, yet another one...) 55# cvx Convex 56# cyg Cygwin 57# d-g Data General DG/UX prior to 5.4 (d41 port no longer exists) 58# d54 Data General DG/UX 5.4 59# do4 Apollo Domain/OS sr10.4 60# dpx Bull DPX/2 B.O.S. 61# drs ICL DRS/NX 62# dyn Dynix 63# epx EP/IX 64# ga4 GCC AIX 4.x for RS/6000 65# gas GCC Altos SVR4 66# gcs GCC Solaris with Blastwave Community Open Source Software 67# gh9 GCC HP-UX 9.x 68# ghp GCC HP-UX 10.x 69# ghs GCC HP-UX 10.x with Trusted Computer Base 70# go5 GCC 2.7.1 (95q4 from Skunkware _not_ 98q2!) SCO Open Server 5.0.x 71# gsc GCC Santa Cruz Operation 72# gsg GCC SGI 73# gso GCC Solaris 74# gsu GCC SUN-OS 75# gul GCC RISC Ultrix (DEC-5000) 76# h11 HP-UX 11i 77# hpp HP-UX 9.x (see gh9) 78# hpx HP-UX 10.x (see ghp, ghs, hxd, and shp) 79# hxd HP-UX 10.x with DCE security (see shp) 80# isc Interactive Systems 81# ldb Debian Linux 82# lfd Fedora Linux 83# ln8 Linux for Nokia N800 84# lnx Linux with traditional passwords and crypt() in the C library 85# (see lnp, sl4, sl5, and slx) 86# lnp Linux with Pluggable Authentication Modules (PAM) 87# lmd Mandrake Linux 88# lr5 RedHat Enterprise Linux 5 and later (same as lfd) 89# lrh RedHat Linux 7.2 and later 90# lsu SuSE Linux (same as lrh) 91# lyn LynxOS 92# mct MachTen 93# mnt Atari ST Mint (not MacMint) 94# neb NetBSD 95# nec NEC UX 96# nto QNX Neutrino RTP 97# nxt NEXTSTEP 98# nx3 NEXTSTEP 3.x 99# osf OSF/1 (see sos, os4) 100# os4 OSF/1 (Digital UNIX) 4 101# osi Apple iPhone and iPod Touch 102# osx Mac OS X 103# oxp Mac OS X with Pluggable Authentication Modules (PAM) 104# oxs Mac OS X Snow Leopard 105# ptx PTX 106# pyr Pyramid 107# qnx QNX 4 108# qn6 QNX 6 109# s40 SUN-OS 4.0 (*not* Solaris) 110# sc5 SCO Open Server 5.0.x (see go5) 111# sco Santa Cruz Operation (see sc5, go5) 112# shp HP-UX with Trusted Computer Base 113# sgi Silicon Graphics IRIX 114# sg6 Silicon Graphics IRIX 6.5 115# sl4 Linux using -lshadow to get the crypt() function 116# sl5 Linux with shadow passwords, no extra libraries 117# slx Linux using -lcrypt to get the crypt() function 118# snx Siemens Nixdorf SININX or Reliant UNIX 119# soc Solaris with /opt/SUNWspro/bin/cc 120# sol Solaris (won't work unless "ucbcc" works -- use gso instead) 121# sos OSF/1 with SecureWare 122# ssn SUN-OS with shadow password security 123# sua Windows Vista (Enterprise or Ultima) Subsystem for Unix Applications 124# sun SUN-OS 4.1 or better (*not* Solaris) (see ssn) 125# sv2 SVR2 on AT&T PC-7300 (incomplete port) 126# sv4 generic SVR4 127# ult RISC Ultrix (DEC-5000) 128# uw2 UnixWare SVR4.2 129# vul VAX Ultrix 130# vu2 VAX Ultrix 2.3 (e.g. for VAXstation-2000 or similar old version) 131 132 133# Extra authenticators (e.g. OTP, Kerberos, etc.). Adds linkage for 134# auth_xxx.c and executes Makefile.xxx, where xxx is the name of the 135# authenticator. Some authenticators are only available from third parties. 136# 137# The following extra authenticators are bundled: 138# gss Kerberos V 139 140EXTRAAUTHENTICATORS= 141 142 143# Additional mailbox drivers. Add linkage for xxxdriver. Some drivers are 144# only available from third parties. 145# 146# The following extra drivers are bundled: 147# mbox if file "mbox" exists on the home directory, automatically moves mail 148# from the spool directory to "mbox" and uses "mbox" as INBOX. 149 150EXTRADRIVERS=mbox 151 152 153# Plaintext password type. Defines how plaintext password authentication is 154# done on this system. 155# 156# The following plaintext login types are bundled: 157# afs AFS authentication database 158# dce DCE authentication database 159# gss Kerberos V 160# nul plaintext authentication never permitted 161# pam PAM authentication (note: for Linux, you should use the "lnp" port 162# instead of setting this...also, you may have to modify PAMLDFLAGS 163# in the imap-[]/src/osdep/unix/Makefile 164# pmb PAM authentication for broken implementations such as Solaris. 165# you may have to modify PAMLDFLAGS 166# std system standard (typically passwd file), determined by port 167# two try alternative (defined by CHECKPWALT), then std 168 169PASSWDTYPE=std 170 171 172# SSL type. Defines whether or not SSL support is on this system 173# 174# The following SSL types are bundled: 175# none no SSL support 176# unix SSL support using OpenSSL 177# nopwd SSL support using OpenSSL, and plaintext authentication permitted only 178# in SSL/TLS sessions 179# sco link SSL before other libraries (for SCO systems) 180# unix.nopwd same as nopwd 181# sco.nopwd same as nopwd, plaintext authentication in SSL/TLS only 182# 183# SSLTYPE=nopwd is now the default as required by RFC 3501 184 185SSLTYPE=nopwd 186 187 188# IP protocol version 189# 190# The following IP protocol versions are defined: 191# 4 (default) IPv4 support only 192# 6 IPv6 and IPv4 support 193 194IP=4 195IP6=6 196 197 198# The following extra compilation flags are defined. None of these flags are 199# recommended. If you use these, include them in the EXTRACFLAGS. 200# 201# -DDISABLE_POP_PROXY 202# By default, the ipop[23]d servers offer POP->IMAP proxy access, 203# which allow a POP client to access mail on an IMAP server by using the 204# POP server as a go-between. Setting this option disables this 205# facility. 206# 207# -DOLDFILESUFFIX=\"xxx\" 208# Change the default suffix appended to the backup .newsrc file from 209# "old". 210# 211# -DSTRICT_RFC822_TIMEZONES 212# Disable recognition of the non-standard UTC (0000), MET (+0100), 213# EET (+0200), JST (+0900), ADT (-0300), AST (-0400), YDT (-0800), 214# YST (-0900), and HST (-1000) symbolic timezones. 215# 216# -DBRITISH_SUMMER_TIME 217# Enables recognition of non-standard symbolic timezone BST as +0100. 218# 219# -DBERING_STANDARD_TIME 220# Enables recognition of non-standard symbolic timezone BST as -1100. 221# 222# -DNEWFOUNDLAND_STANDARD_TIME 223# Enables recognition of non-standard symbolic timezone NST as -0330. 224# 225# -DNOME_STANDARD_TIME 226# Enables recognition of non-standard symbolic timezone NST as -1100. 227# 228# -DSAMOA_STANDARD_TIME 229# Enables recognition of non-standard symbolic timezone SST as -1100. 230# 231# -DY4KBUGFIX 232# Turn on the Y4K bugfix (yes, that's year 4000). It isn't well-known, 233# but century years evenly divisible by 4000 are *not* leap years in the 234# Gregorian calendar. A lot of "Y2K compliant" software does not know 235# about this rule. Remember to turn this on sometime in the next 2000 236# years. 237# 238# -DUSEORTHODOXCALENDAR 239# Use the more accurate Eastern Orthodox calendar instead of the 240# Gregorian calendar. The century years which are leap years happen 241# at alternating 400 and 500 year intervals without shifts every 4000 242# years. The Orthodox and Gregorian calendars diverge by 1 day for 243# gradually-increasing intervals, starting at 2800-2900, and becoming 244# permanent at 48,300. 245# 246# -DUSEJULIANCALENDAR 247# Use the less accurate Julian calendar instead of the Gregorian 248# calendar. Leap years are every 4 years, including century years. 249# My apologies to those in the English-speaking world who object to 250# the reform of September 2, 1752 -> September 14, 1752, since this 251# code still uses January 1 (which Julius Caesar decreed as the start 252# of the year, which since 153 BCE was the day that Roman consuls 253# took office), rather than the traditional March 25 used by the 254# British. As of 2005, the Julian calendar and the Gregorian calendar 255# diverge by 15 days. 256 257EXTRACFLAGS= 258 259 260# Extra linker flags (additional/alternative libraries, etc.) 261 262EXTRALDFLAGS= 263 264 265# Special make flags (e.g. to override make environment variables) 266 267EXTRASPECIALS= 268SPECIALS= 269BUNDLED= 270 271 272# Normal commands 273 274CAT=cat 275CD=cd 276LN=ln -s 277MAKE=make 278MKDIR=mkdir 279BUILDTYPE=rebuild 280RM=rm -rf 281SH=sh 282SYSTEM=unix 283TOOLS=tools 284TOUCH=touch 285INSTALL=install 286 287 288# Primary build command 289 290BUILD=$(MAKE) build EXTRACFLAGS='$(EXTRACFLAGS)'\ 291 EXTRALDFLAGS='$(EXTRALDFLAGS)'\ 292 EXTRADRIVERS='$(EXTRADRIVERS)'\ 293 EXTRAAUTHENTICATORS='$(EXTRAAUTHENTICATORS)'\ 294 PASSWDTYPE=$(PASSWDTYPE) SSLTYPE=$(SSLTYPE) IP=$(IP)\ 295 EXTRASPECIALS='$(EXTRASPECIALS)' BUNDLED='$(BUNDLED)' 296 297 298# Make the IMAP Toolkit 299 300all: c-client SPECIALS rebuild bundled$(BUNDLED) 301 302c-client: 303 @echo Not processed yet. In a first-time build, you must specify 304 @echo the system type so that the sources are properly processed. 305 @false 306 307 308SPECIALS: 309 echo $(SPECIALS) > SPECIALS 310 311# Note on SCO you may have to set LN to "ln". 312 313a32 a41 a52 aix bs3 bsi d-g d54 do4 drs epx ga4 gas gh9 ghp ghs go5 gsc gsg gso gul h11 hpp hpx lnp lyn mct mnt nec nto nxt nx3 osf os4 ptx qnx qn6 sc5 sco sgi sg6 shp sl4 sl5 slx snx soc sol sos uw2: an 314 $(BUILD) BUILDTYPE=$@ 315 316# If you use sv4, you may find that it works to move it to use the an process. 317# If so, you probably will want to delete the "-Dconst=" from the sv4 CFLAGS in 318# the c-client Makefile. 319 320aos art asv aux bsd cvx dpx dyn isc pyr sv4 ult vul vu2: ua 321 $(BUILD) BUILDTYPE=$@ 322 323 324# Knotheads moved Kerberos and SSL locations on these platforms 325 326# Paul Vixie claims that all FreeBSD versions have working IPv6 327 328bsf: an 329 $(TOUCH) ip6 330 $(BUILD) BUILDTYPE=$@ IP=$(IP6) \ 331 PASSWDTYPE=pam \ 332 SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMLDFLAGS=-lpam" 333 334# I assume that Theo did the right thing for IPv6. OpenBSD does not have PAM. 335 336bso: an 337 $(TOUCH) ip6 338 $(BUILD) BUILDTYPE=$@ IP=$(IP6) \ 339 SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib" 340 341# Info from Joel Reicher about NetBSD SSL paths. I assume it has PAM because pam is in NetBSD sources... 342 343neb: an 344 $(TOUCH) ip6 345 $(BUILD) BUILDTYPE=$@ IP=$(IP6) \ 346 PASSWDTYPE=pam \ 347 SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMLDFLAGS=-lpam" 348 349cyg: an 350 $(BUILD) BUILDTYPE=cyg \ 351 352gcs: an 353 $(BUILD) BUILDTYPE=gso \ 354 SPECIALS="SSLINCLUDE=/opt/csw/include/openssl SSLLIB=/opt/csw/lib SSLCERTS=/opt/csw/ssl/certs SSLKEYS=/opt/csw/ssl/certs" 355 356ldb: an 357 $(BUILD) BUILDTYPE=lnp$(BUNDLED) IP=$(IP6) \ 358 SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib MAILSPOOL=/var/mail" 359 360lfd: an 361 $(BUILD) BUILDTYPE=lnp$(BUNDLED) IP=$(IP6) \ 362 SPECIALS="GSSDIR=/usr/kerberos" 363 364ln8: an 365 $(TOUCH) ip6 366 $(BUILD) BUILDTYPE=slx IP=$(IP6) \ 367 SPECIALS="MAILSPOOL=/var/mail" 368 369 370# RHEL5/6 does not have the IPv6 bug 371 372lr5: an 373 $(TOUCH) ip6 374 $(BUILD) BUILDTYPE=lnp$(BUNDLED) IP=$(IP6) \ 375 SPECIALS="GSSDIR=/usr/kerberos" 376 377lmd: an 378 $(BUILD) BUILDTYPE=lnp$(BUNDLED) IP=$(IP6) \ 379 SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib" 380 381# RHEL3 definitely has the IPv6 bug 382 383lrh: lrhok an 384 $(BUILD) BUILDTYPE=lnp$(BUNDLED) IP=$(IP6) \ 385 SPECIALS="GSSDIR=/usr/kerberos" 386 387lrhok: 388 @$(SH) -c '(test ! -d /etc/pki/tls ) || make lrhwarn' 389 @$(TOUCH) lrhok 390 391lrhwarn: 392 @echo You are building for OLD versions of RedHat Linux. This build 393 @echo is NOT suitable for RedHat Enterprise 5 / 6, which store SSL/TLS 394 @echo certificates and keys in /etc/pki/tls rather than /usr/share/ssl. 395 @echo If you want to build for modern RedHat Linux, you should use 396 @echo make lr5 instead. 397 @echo Do you want to continue this build? Type y or n please: 398 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac' 399 @echo OK, I will remember that you really want to build for old 400 @echo RedHat Linux. You will not see this message again. 401 @echo If you realize that you really wanted to build for modern 402 @echo RedHat Linux, then do the following commands: 403 @echo % rm lrhok 404 @echo % make clean 405 @echo % make lr5 406 407lsu: an 408 $(BUILD) BUILDTYPE=lnp$(BUNDLED) IP=$(IP6) \ 409 SPECIALS="GSSDIR=/usr/kerberos" 410 411# iToy does not have Kerberos or PAM. It doesn't have a 412# /System/Library/OpenSSL directory either, but the libcrypto shared library 413# has these locations so this is what we will use. 414 415osi: an 416 $(TOUCH) ip6 417 $(BUILD) BUILDTYPE=osx IP=$(IP6) CC=arm-apple-darwin-gcc \ 418 EXTRACFLAGS="$(EXTRACFLAGS) -DMAC_OSX_KLUDGE=1 -Dhash_create=Hash_create -Dhash_destroy=Hash_destroy -Dlogout=Logout" \ 419 420oxp: an 421 $(TOUCH) ip6 422 $(BUILD) BUILDTYPE=osx IP=$(IP6) \ 423 PASSWDTYPE=pam \ 424 EXTRACFLAGS="$(EXTRACFLAGS) -DMAC_OSX_KLUDGE=1" \ 425 SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMDLFLAGS=-lpam" 426 427oxs: an 428 $(TOUCH) ip6 429 $(BUILD) BUILDTYPE=osx IP=$(IP6) \ 430 PASSWDTYPE=pam \ 431 SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMDLFLAGS=-lpam" 432 433osx: osxok an 434 $(TOUCH) ip6 435 $(BUILD) BUILDTYPE=$@ IP=$(IP6) \ 436 SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib" 437 438osxok: 439 @$(SH) -c '(test ! -f /usr/include/pam/pam_appl.h ) || make osxwarn' 440 @$(TOUCH) osxok 441 442osxwarn: 443 @echo You are building for OLD versions of Mac OS X. This build is 444 @echo NOT suitable for modern versions of Mac OS X, such as Tiger, 445 @echo which use PAM-based authentication. If you want to build for 446 @echo modern Mac OS X, you should use make oxp instead. 447 @echo Do you want to continue this build? Type y or n please: 448 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac' 449 @echo OK, I will remember that you really want to build for old 450 @echo Mac OS X. You will not see this message again. 451 @echo If you realize that you really wanted to build for modern 452 @echo Mac OS X, then do the following commands: 453 @echo % rm osxok 454 @echo % make clean 455 @echo % make oxp 456 457 458# Linux shadow password support doesn't build on traditional systems, but most 459# Linux systems are shadow these days. 460 461lnx: lnxnul an 462 $(BUILD) BUILDTYPE=$@ 463 464lnxnul: 465 @$(SH) -c '(test $(PASSWDTYPE) = nul) || make lnxok' 466 467lnxok: 468 @echo You are building for traditional Linux. Most modern Linux 469 @echo systems require that you build using make slx. 470 @echo Do you want to continue this build? Type y or n please: 471 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac' 472 @echo OK, I will remember that you really want to build for 473 @echo traditional Linux. You will not see this message again. 474 @echo If you discover that you can not log in to the POP and IMAP 475 @echo servers, then do the following commands: 476 @echo % rm lnxok 477 @echo % make clean 478 @echo % make slx 479 @echo If slx does not work, try sl4 or sl5. Be sure to do a 480 @echo make clean between each try! 481 @$(TOUCH) lnxok 482 483 484# SUN-OS C compiler makes you load libdl by hand... 485 486ssn sun: sunok suntools ua 487 $(BUILD) BUILDTYPE=$@ 488 489suntools: 490 $(CD) tools;$(MAKE) LDFLAGS=-ldl 491 492gsu: sunok an 493 $(BUILD) BUILDTYPE=$@ 494 495s40: sunok ua 496 $(BUILD) BUILDTYPE=$@ 497 498sunok: 499 @echo You are building for the old BSD-based SUN-OS. This is NOT 500 @echo the modern SVR4-based Solaris. If you want to build for 501 @echo Solaris, you should use make gso or make sol or make soc. Do 502 @echo you want to continue this build? Type y or n please: 503 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac' 504 @echo OK, I will remember that you really want to build for the old 505 @echo BSD-based SUN-OS. You will not see this message again. 506 @echo If the build fails and you realize that you really wanted to 507 @echo build for Solaris, then do the following commands: 508 @echo % rm sunok 509 @echo % make clean 510 @echo % make gso 511 @echo If gso does not work, try sol. Be sure to do a make clean 512 @echo between each try! 513 @$(TOUCH) sunok 514 515 516# SVR2 doesn't have symbolic links (at least my SVR2 system doesn't) 517 518sv2: 519 $(MAKE) ua LN=ln 520 $(BUILD) BUILDTYPE=$@ LN=ln 521 522# Hard links don't quite work right in SUA, and there don't seem to be any 523# SSL includes. However, IPv6 works. 524 525sua: 526 $(TOUCH) ip6 sslnone 527 $(MAKE) an LN=cp SSLTYPE=none 528 $(BUILD) BUILDTYPE=$@ LN=cp IP=$(IP6) SSLTYPE=none 529 530 531# Pine port names, not distinguished in c-client 532 533bs2: an 534 $(BUILD) BUILDTYPE=bsi 535 536pt1: an 537 $(BUILD) BUILDTYPE=ptx 538 539 540# Compatibility 541 542hxd: 543 $(BUILD) BUILDTYPE=hpx PASSWDTYPE=dce 544 545# Amiga 546 547ami am2 ama amn: 548 $(MAKE) an LN=cp SYSTEM=amiga 549 $(BUILD) BUILDTYPE=$@ LN=cp 550 551 552# Courtesy entries for Microsoft systems 553 554nt: 555 nmake /nologo /f makefile.nt 556 557ntk: 558 nmake /nologo /f makefile.ntk 559 560w2k: 561 nmake /nologo /f makefile.w2k 562 563wce: 564 nmake /nologo /f makefile.wce 565 566 567# SSL build choices 568 569sslnopwd sslunix.nopwd sslsco.nopwd: 570 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 571 @echo + Building in full compliance with RFC 3501 security 572 @echo + requirements: 573 @echo ++ TLS/SSL encryption is supported 574 @echo ++ Unencrypted plaintext passwords are prohibited 575 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 576 577sslunix sslsco: 578 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 579 @echo + Building in PARTIAL compliance with RFC 3501 security 580 @echo + requirements: 581 @echo + Compliant: 582 @echo ++ TLS/SSL encryption is supported 583 @echo + Non-compliant: 584 @echo ++ Unencrypted plaintext passwords are permitted 585 @echo + 586 @echo + In order to rectify this problem, you MUST build with: 587 @echo ++ SSLTYPE=$(SSLTYPE).nopwd 588 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 589 @echo 590 @echo Do you want to continue this build anyway? Type y or n please: 591 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) (make nounenc;exit 1);; esac' 592 593nounenc: 594 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 595 @echo + At your request, this build with unencrypted authentication has 596 @echo + been CANCELLED. 597 @echo + You must start over with a new make command. 598 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 599 600 601sslnone: 602 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 603 @echo + Building in NON-COMPLIANCE with RFC 3501 security requirements: 604 @echo + Non-compliant: 605 @echo ++ TLS/SSL encryption is NOT supported 606 @echo ++ Unencrypted plaintext passwords are permitted 607 @echo + 608 @echo + In order to rectify this problem, you MUST build with: 609 @echo ++ SSLTYPE=nopwd 610 @echo + You must also have OpenSSL or equivalent installed. 611 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 612 @echo 613 @echo Do you want to continue this build anyway? Type y or n please: 614 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) (make nonossl;exit 1);; esac' 615 616nonossl: 617 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 618 @echo + At your request, this build with no TLS/SSL support has been 619 @echo + CANCELLED. 620 @echo + You must start over with a new make command. 621 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 622 623 624# IP build choices 625 626ip4: 627 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 628 @echo + Building with IPv4 support 629 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 630 631ip6: 632 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 633 @echo + Building with IPv6 support 634 @echo + 635 @echo + NOTE: Some versions of glibc have a bug in the getaddrinfo 636 @echo + call which does DNS name resolution. This bug causes host 637 @echo + names to be canonicalized incorrectly, as well as doing an 638 @echo + unnecessary and performance-sapping reverse DNS call. This 639 @echo + problem does not affect the IPv4 gethostbyname call. 640 @echo + 641 @echo + getaddrinfo works properly on Mac OS X and Windows. However, 642 @echo + the problem has been observed on some Linux systems. 643 @echo + 644 @echo + If you answer n to the following question the build will be 645 @echo + cancelled and you must rebuild. If you did not specify IPv6 646 @echo + yourself, try adding IP6=4 to the make command line. 647 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 648 @echo 649 @echo Do you want to build with IPv6 anyway? Type y or n please: 650 @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) (make noip6;exit 1);; esac' 651 @echo OK, I will remember that you really want to build with IPv6. 652 @echo You will not see this message again. 653 @$(TOUCH) ip6 654 655noip6: 656 $(MAKE) clean 657 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 658 @echo + At your request, this build with IPv6 has been CANCELLED. 659 @echo + You must start over with a new make command. 660 @echo + 661 @echo + If you wish to rebuild without IPv6 support, do one of the 662 @echo + following: 663 @echo + 664 @echo + 1. If you specified IP=6 on the make command line, omit it. 665 @echo + 666 @echo + 2. Some of the Linux builds automatically select IPv6. If 667 @echo + you choose one of those builds, add IP6=4 to the make command 668 @echo + line. Note that this is IP6=4, not IP=4. 669 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 670 671# C compiler types 672 673an ua: 674 @$(MAKE) ssl$(SSLTYPE) 675 @echo Applying $@ process to sources... 676 $(TOOLS)/$@ "$(LN)" src/c-client c-client 677 $(TOOLS)/$@ "$(LN)" src/ansilib c-client 678 $(TOOLS)/$@ "$(LN)" src/charset c-client 679 $(TOOLS)/$@ "$(LN)" src/osdep/$(SYSTEM) c-client 680 $(TOOLS)/$@ "$(LN)" src/mtest mtest 681 $(TOOLS)/$@ "$(LN)" src/ipopd ipopd 682 $(TOOLS)/$@ "$(LN)" src/imapd imapd 683 $(TOOLS)/$@ "$(LN)" src/mailutil mailutil 684 $(TOOLS)/$@ "$(LN)" src/mlock mlock 685 $(TOOLS)/$@ "$(LN)" src/dmail dmail 686 $(TOOLS)/$@ "$(LN)" src/tmail tmail 687 $(LN) $(TOOLS)/$@ . 688 689build: OSTYPE rebuild rebuildclean bundled$(BUNDLED) 690 691OSTYPE: 692 @$(MAKE) ip$(IP) 693 @echo Building c-client for $(BUILDTYPE)... 694 @$(TOUCH) SPECIALS 695 echo `$(CAT) SPECIALS` $(EXTRASPECIALS) > c-client/SPECIALS 696 $(CD) c-client;$(MAKE) $(BUILDTYPE) EXTRACFLAGS='$(EXTRACFLAGS)'\ 697 EXTRALDFLAGS='$(EXTRALDFLAGS)'\ 698 EXTRADRIVERS='$(EXTRADRIVERS)'\ 699 EXTRAAUTHENTICATORS='$(EXTRAAUTHENTICATORS)'\ 700 PASSWDTYPE=$(PASSWDTYPE) SSLTYPE=$(SSLTYPE) IP=$(IP)\ 701 $(SPECIALS) $(EXTRASPECIALS) BUNDLED='$(BUNDLED)' 702 echo $(BUILDTYPE) > OSTYPE 703 $(TOUCH) rebuild 704 705rebuild: 706 @$(SH) -c '(test $(BUILDTYPE) = rebuild -o $(BUILDTYPE) = `$(CAT) OSTYPE`) || (echo Already built for `$(CAT) OSTYPE` -- you must do \"make clean\" first && exit 1)' 707 @echo Rebuilding c-client for `$(CAT) OSTYPE`... 708 @$(TOUCH) SPECIALS 709 $(CD) c-client;$(MAKE) all CC=`$(CAT) CCTYPE` \ 710 CFLAGS="`$(CAT) CFLAGS`" `$(CAT) SPECIALS` 711 712rebuildclean: 713 $(SH) -c '$(RM) rebuild || true' 714 715bundledno: 716 @echo Not building bundled tools. 717 718bundled: 719 @echo Building bundled tools... 720 @echo BUNDLED=$(BUNDLED) 721 $(CD) mtest;$(MAKE) 722 $(CD) ipopd;$(MAKE) 723 $(CD) imapd;$(MAKE) 724 $(CD) mailutil;$(MAKE) 725 @$(SH) -c '(test -f /usr/include/sysexits.h ) || make sysexitwarn' 726 $(CD) mlock;$(MAKE) || true 727 $(CD) dmail;$(MAKE) || true 728 $(CD) tmail;$(MAKE) || true 729 730install-mailutil: bundled$(BUNDLED) 731 @echo Installing mailutil... 732 @echo BUNDLED=$(BUNDLED) 733 if test x"$(BUNDLED)" = x""; then \ 734 $(INSTALL) -d $(DESTDIR)$(bindir); \ 735 $(INSTALL) mailutil/mailutil $(DESTDIR)$(bindir)/mailutil; \ 736 $(INSTALL) -d $(DESTDIR)$(mandir)/man1; \ 737 $(INSTALL) src/mailutil/mailutil.1 $(DESTDIR)$(mandir)/man1/mailutil.1; \ 738 fi 739 740uninstall-mailutil: 741 @echo Uninstalling mailutil... 742 @echo BUNDLED=$(BUNDLED) 743 if test x"$(BUNDLED)" = x""; then \ 744 $(RM) $(DESTDIR)$(bindir)/mailutil; \ 745 $(RM) $(DESTDIR)$(mandir)/man1/mailutil.1; \ 746 fi 747 748sysexitwarn: 749 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 750 @echo + Hmm...it does not look like /usr/include/sysexits.h exists. 751 @echo + Either your system is too ancient to have the sysexits.h 752 @echo + include, or your C compiler gets it from some other location 753 @echo + than /usr/include. If your system is too old to have the 754 @echo + sysexits.h include, you will not be able to build the 755 @echo + following programs. 756 @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 757 758clean: 759 @echo Removing old processed sources and binaries... 760 $(SH) -c '$(RM) an ua OSTYPE SPECIALS c-client mtest imapd ipopd mailutil mlock dmail tmail ip6 || true' 761 $(CD) tools;$(MAKE) clean 762 763 764# A monument to a hack of long ago and far away... 765love: 766 @echo not war? 767