1 /* 2 * (C) Copyright 2008 3 * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de 4 * 5 * Based on include/configs/yosemite.h 6 * (C) Copyright 2005-2007 7 * Stefan Roese, DENX Software Engineering, sr@denx.de. 8 * 9 * See file CREDITS for list of people who contributed to this 10 * project. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of 15 * the License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 25 * MA 02111-1307 USA 26 */ 27 28 /* 29 * gdppc440etx.h - configuration for G&D 440EP/GR ETX-Module 30 */ 31 #ifndef __CONFIG_H 32 #define __CONFIG_H 33 34 /* 35 * High Level Configuration Options 36 */ 37 #define CONFIG_440GR 1 /* Specific PPC440GR support */ 38 #define CONFIG_HOSTNAME gdppc440etx 39 #define CONFIG_440 1 /* ... PPC440 family */ 40 #define CONFIG_4xx 1 /* ... PPC4xx family */ 41 #define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ 42 43 /* 44 * Include common defines/options for all AMCC eval boards 45 */ 46 #include "amcc-common.h" 47 48 #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f*/ 49 #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ 50 51 /* 52 * Base addresses -- Note these are effective addresses where the 53 * actual resources get mapped (not physical addresses) 54 */ 55 #define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of FLASH */ 56 #define CONFIG_SYS_PCI_MEMBASE 0xa0000000 /* mapped pci memory */ 57 #define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000 58 #define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 59 #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 60 61 /*Don't change either of these*/ 62 #define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripheral*/ 63 #define CONFIG_SYS_PCI_BASE 0xe0000000 /* internal PCI regs */ 64 /*Don't change either of these*/ 65 66 #define CONFIG_SYS_USB_DEVICE 0x50000000 67 #define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000 68 69 /* 70 * Initial RAM & stack pointer (placed in SDRAM) 71 */ 72 #define CONFIG_SYS_INIT_RAM_DCACHE 1 /* d-cache as init ram*/ 73 #define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* DCache */ 74 #define CONFIG_SYS_INIT_RAM_END (4 << 10) 75 #define CONFIG_SYS_GBL_DATA_SIZE 256 /* num bytes init data*/ 76 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ 77 - CONFIG_SYS_GBL_DATA_SIZE) 78 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 79 80 /* 81 * Serial Port 82 */ 83 #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ 84 #define CONFIG_UART1_CONSOLE 85 86 /* 87 * Environment 88 * Define here the location of the environment variables (FLASH or EEPROM). 89 * Note: DENX encourages to use redundant environment in FLASH. 90 */ 91 #define CONFIG_ENV_IS_IN_FLASH 1 /* FLASH for env. vars*/ 92 93 /* 94 * FLASH related 95 */ 96 #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible*/ 97 #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ 98 #define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB!*/ 99 100 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 101 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors/chip */ 102 103 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout/Flash Erase (in ms)*/ 104 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout/Flash Write (in ms)*/ 105 106 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1/* use buffered writes (20x faster)*/ 107 108 #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ 109 110 #ifdef CONFIG_ENV_IS_IN_FLASH 111 #define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector*/ 112 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) 113 #define CONFIG_ENV_SIZE 0x2000 /* Total Size of Env. Sector */ 114 115 /* Address and size of Redundant Environment Sector */ 116 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) 117 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 118 #endif /* CONFIG_ENV_IS_IN_FLASH */ 119 120 /* 121 * DDR SDRAM 122 */ 123 #undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup*/ 124 #define CONFIG_SYS_KBYTES_SDRAM (128 * 1024) /* 128MB */ 125 #define CONFIG_SYS_SDRAM_BANKS (2) 126 127 #define CONFIG_SDRAM_BANK0 128 #define CONFIG_SDRAM_BANK1 129 130 #define CONFIG_SYS_SDRAM0_TR0 0x410a4012 131 #define CONFIG_SYS_SDRAM0_WDDCTR 0x40000000 132 #define CONFIG_SYS_SDRAM0_RTR 0x04080000 133 #define CONFIG_SYS_SDRAM0_CFG0 0x80000000 134 135 #undef CONFIG_SDRAM_ECC 136 137 /* 138 * I2C 139 */ 140 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed+slave address*/ 141 142 /* 143 * Default environment variables 144 */ 145 #define CONFIG_EXTRA_ENV_SETTINGS \ 146 CONFIG_AMCC_DEF_ENV \ 147 CONFIG_AMCC_DEF_ENV_POWERPC \ 148 CONFIG_AMCC_DEF_ENV_NOR_UPD \ 149 "kernel_addr=fc000000\0" \ 150 "ramdisk_addr=fc180000\0" \ 151 "" 152 153 #define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ 154 #define CONFIG_PHY_ADDR 1 155 #define CONFIG_PHY1_ADDR 3 156 157 #ifdef DEBUG 158 #define CONFIG_PANIC_HANG 159 #endif 160 161 /* 162 * Commands additional to the ones defined in amcc-common.h 163 */ 164 #define CONFIG_CMD_PCI 165 #undef CONFIG_CMD_EEPROM 166 167 /* 168 * PCI stuff 169 */ 170 171 /* General PCI */ 172 #define CONFIG_PCI /* include pci support */ 173 #undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ 174 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup*/ 175 #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to \ 176 CONFIG_SYS_PCI_MEMBASE*/ 177 178 /* Board-specific PCI */ 179 #define CONFIG_SYS_PCI_TARGET_INIT 180 #define CONFIG_SYS_PCI_MASTER_INIT 181 182 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ 183 #define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* tbd */ 184 185 /* 186 * External Bus Controller (EBC) Setup 187 */ 188 #define CONFIG_SYS_FLASH CONFIG_SYS_FLASH_BASE 189 190 /* Memory Bank 0 (NOR-FLASH) initialization */ 191 #define CONFIG_SYS_EBC_PB0AP 0x03017200 192 #define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH | 0xda000) 193 194 #endif /* __CONFIG_H */ 195