1 /*
2  * (C) Copyright 2000
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 
24 /* #define DEBUG */
25 
26 #include <common.h>
27 #include <flash.h>
28 
29 #if !defined(CONFIG_SYS_NO_FLASH)
30 
31 extern flash_info_t  flash_info[]; /* info for FLASH chips */
32 
33 /*-----------------------------------------------------------------------
34  * Functions
35  */
36 
37 /*-----------------------------------------------------------------------
38  * Set protection status for monitor sectors
39  *
40  * The monitor is always located in the _first_ Flash bank.
41  * If necessary you have to map the second bank at lower addresses.
42  */
43 void
flash_protect(int flag,ulong from,ulong to,flash_info_t * info)44 flash_protect (int flag, ulong from, ulong to, flash_info_t *info)
45 {
46 	ulong b_end = info->start[0] + info->size - 1;	/* bank end address */
47 	short s_end = info->sector_count - 1;	/* index of last sector */
48 	int i;
49 
50 	/* Do nothing if input data is bad. */
51 	if (info->sector_count == 0 || info->size == 0 || to < from) {
52 		return;
53 	}
54 
55 	debug ("flash_protect %s: from 0x%08lX to 0x%08lX\n",
56 		(flag & FLAG_PROTECT_SET) ? "ON" :
57 			(flag & FLAG_PROTECT_CLEAR) ? "OFF" : "???",
58 		from, to);
59 
60 	/* There is nothing to do if we have no data about the flash
61 	 * or the protect range and flash range don't overlap.
62 	 */
63 	if (info->flash_id == FLASH_UNKNOWN ||
64 	    to < info->start[0] || from > b_end) {
65 		return;
66 	}
67 
68 	for (i=0; i<info->sector_count; ++i) {
69 		ulong end;		/* last address in current sect	*/
70 
71 		end = (i == s_end) ? b_end : info->start[i + 1] - 1;
72 
73 		/* Update protection if any part of the sector
74 		 * is in the specified range.
75 		 */
76 		if (from <= end && to >= info->start[i]) {
77 			if (flag & FLAG_PROTECT_CLEAR) {
78 #if defined(CONFIG_SYS_FLASH_PROTECTION)
79 				flash_real_protect(info, i, 0);
80 #else
81 				info->protect[i] = 0;
82 #endif	/* CONFIG_SYS_FLASH_PROTECTION */
83 				debug ("protect off %d\n", i);
84 			}
85 			else if (flag & FLAG_PROTECT_SET) {
86 #if defined(CONFIG_SYS_FLASH_PROTECTION)
87 				flash_real_protect(info, i, 1);
88 #else
89 				info->protect[i] = 1;
90 #endif	/* CONFIG_SYS_FLASH_PROTECTION */
91 				debug ("protect on %d\n", i);
92 			}
93 		}
94 	}
95 }
96 
97 /*-----------------------------------------------------------------------
98  */
99 
100 flash_info_t *
addr2info(ulong addr)101 addr2info (ulong addr)
102 {
103 #ifndef CONFIG_SPD823TS
104 	flash_info_t *info;
105 	int i;
106 
107 	for (i=0, info = &flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
108 		if (info->flash_id != FLASH_UNKNOWN &&
109 		    addr >= info->start[0] &&
110 		    /* WARNING - The '- 1' is needed if the flash
111 		     * is at the end of the address space, since
112 		     * info->start[0] + info->size wraps back to 0.
113 		     * Please don't change this unless you understand this.
114 		     */
115 		    addr <= info->start[0] + info->size - 1) {
116 			return (info);
117 		}
118 	}
119 #endif /* CONFIG_SPD823TS */
120 
121 	return (NULL);
122 }
123 
124 /*-----------------------------------------------------------------------
125  * Copy memory to flash.
126  * Make sure all target addresses are within Flash bounds,
127  * and no protected sectors are hit.
128  * Returns:
129  * ERR_OK          0 - OK
130  * ERR_TIMOUT      1 - write timeout
131  * ERR_NOT_ERASED  2 - Flash not erased
132  * ERR_PROTECTED   4 - target range includes protected sectors
133  * ERR_INVAL       8 - target address not in Flash memory
134  * ERR_ALIGN       16 - target address not aligned on boundary
135  *			(only some targets require alignment)
136  */
137 int
flash_write(char * src,ulong addr,ulong cnt)138 flash_write (char *src, ulong addr, ulong cnt)
139 {
140 #ifdef CONFIG_SPD823TS
141 	return (ERR_TIMOUT);	/* any other error codes are possible as well */
142 #else
143 	int i;
144 	ulong         end        = addr + cnt - 1;
145 	flash_info_t *info_first = addr2info (addr);
146 	flash_info_t *info_last  = addr2info (end );
147 	flash_info_t *info;
148 
149 	if (cnt == 0) {
150 		return (ERR_OK);
151 	}
152 
153 	if (!info_first || !info_last) {
154 		return (ERR_INVAL);
155 	}
156 
157 	for (info = info_first; info <= info_last; ++info) {
158 		ulong b_end = info->start[0] + info->size;	/* bank end addr */
159 		short s_end = info->sector_count - 1;
160 		for (i=0; i<info->sector_count; ++i) {
161 			ulong e_addr = (i == s_end) ? b_end : info->start[i + 1];
162 
163 			if ((end >= info->start[i]) && (addr < e_addr) &&
164 			    (info->protect[i] != 0) ) {
165 				return (ERR_PROTECTED);
166 			}
167 		}
168 	}
169 
170 	/* finally write data to flash */
171 	for (info = info_first; info <= info_last && cnt>0; ++info) {
172 		ulong len;
173 
174 		len = info->start[0] + info->size - addr;
175 		if (len > cnt)
176 			len = cnt;
177 		if ((i = write_buff(info, (uchar *)src, addr, len)) != 0) {
178 			return (i);
179 		}
180 		cnt  -= len;
181 		addr += len;
182 		src  += len;
183 	}
184 	return (ERR_OK);
185 #endif /* CONFIG_SPD823TS */
186 }
187 
188 /*-----------------------------------------------------------------------
189  */
190 
flash_perror(int err)191 void flash_perror (int err)
192 {
193 	switch (err) {
194 	case ERR_OK:
195 		break;
196 	case ERR_TIMOUT:
197 		puts ("Timeout writing to Flash\n");
198 		break;
199 	case ERR_NOT_ERASED:
200 		puts ("Flash not Erased\n");
201 		break;
202 	case ERR_PROTECTED:
203 		puts ("Can't write to protected Flash sectors\n");
204 		break;
205 	case ERR_INVAL:
206 		puts ("Outside available Flash\n");
207 		break;
208 	case ERR_ALIGN:
209 		puts ("Start and/or end address not on sector boundary\n");
210 		break;
211 	case ERR_UNKNOWN_FLASH_VENDOR:
212 		puts ("Unknown Vendor of Flash\n");
213 		break;
214 	case ERR_UNKNOWN_FLASH_TYPE:
215 		puts ("Unknown Type of Flash\n");
216 		break;
217 	case ERR_PROG_ERROR:
218 		puts ("General Flash Programming Error\n");
219 		break;
220 	default:
221 		printf ("%s[%d] FIXME: rc=%d\n", __FILE__, __LINE__, err);
222 		break;
223 	}
224 }
225 
226 /*-----------------------------------------------------------------------
227  */
228 #endif /* !CONFIG_SYS_NO_FLASH */
229