1 /* 2 * Copyright 2007 Freescale Semiconductor, Inc. 3 * 4 * This file is licensed under the terms of the GNU General Public 5 * License Version 2. This file is licensed "as is" without any 6 * warranty of any kind, whether express or implied. 7 */ 8 9 #ifndef _CONFIG_CMD_ALL_H 10 #define _CONFIG_CMD_ALL_H 11 12 /* 13 * Alphabetical list of all possible commands. 14 */ 15 16 #define CONFIG_CMD_AMBAPP /* AMBA Plug & Play Bus print utility */ 17 #define CONFIG_CMD_ASKENV /* ask for env variable */ 18 #define CONFIG_CMD_AT91_SPIMUX /* AT91 MMC/SPI Mux Support */ 19 #define CONFIG_CMD_BDI /* bdinfo */ 20 #define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */ 21 #define CONFIG_CMD_BMP /* BMP support */ 22 #define CONFIG_CMD_BOOTD /* bootd */ 23 #define CONFIG_CMD_BSP /* Board Specific functions */ 24 #define CONFIG_CMD_CACHE /* icache, dcache */ 25 #define CONFIG_CMD_CDP /* Cisco Discovery Protocol */ 26 #define CONFIG_CMD_CONSOLE /* coninfo */ 27 #define CONFIG_CMD_DATE /* support for RTC, date/time...*/ 28 #define CONFIG_CMD_DHCP /* DHCP Support */ 29 #define CONFIG_CMD_DIAG /* Diagnostics */ 30 #define CONFIG_CMD_DISPLAY /* Display support */ 31 #define CONFIG_CMD_DOC /* Disk-On-Chip Support */ 32 #define CONFIG_CMD_DTT /* Digital Therm and Thermostat */ 33 #define CONFIG_CMD_ECHO /* echo arguments */ 34 #define CONFIG_CMD_EDITENV /* editenv */ 35 #define CONFIG_CMD_EEPROM /* EEPROM read/write support */ 36 #define CONFIG_CMD_ELF /* ELF (VxWorks) load/boot cmd */ 37 #define CONFIG_CMD_EXT2 /* EXT2 Support */ 38 #define CONFIG_CMD_FAT /* FAT support */ 39 #define CONFIG_CMD_FDC /* Floppy Disk Support */ 40 #define CONFIG_CMD_FDOS /* Floppy DOS support */ 41 #define CONFIG_CMD_FLASH /* flinfo, erase, protect */ 42 #define CONFIG_CMD_FPGA /* FPGA configuration Support */ 43 #define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */ 44 #define CONFIG_CMD_I2C /* I2C serial bus support */ 45 #define CONFIG_CMD_IDE /* IDE harddisk support */ 46 #define CONFIG_CMD_IMI /* iminfo */ 47 #define CONFIG_CMD_IMLS /* List all found images */ 48 #define CONFIG_CMD_IMMAP /* IMMR dump support */ 49 #define CONFIG_CMD_IRQ /* irqinfo */ 50 #define CONFIG_CMD_ITEST /* Integer (and string) test */ 51 #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ 52 #define CONFIG_CMD_KGDB /* kgdb */ 53 #define CONFIG_CMD_LICENSE /* console license display */ 54 #define CONFIG_CMD_LOADB /* loadb */ 55 #define CONFIG_CMD_LOADS /* loads */ 56 #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ 57 #define CONFIG_CMD_MFSL /* FSL support for Microblaze */ 58 #define CONFIG_CMD_MG_DISK /* mGine m(g)flash IO node support */ 59 #define CONFIG_CMD_MII /* MII support */ 60 #define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ 61 #define CONFIG_CMD_MMC /* MMC support */ 62 #define CONFIG_CMD_MTDPARTS /* mtd parts support */ 63 #define CONFIG_CMD_NAND /* NAND support */ 64 #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ 65 #define CONFIG_CMD_NFS /* NFS support */ 66 #define CONFIG_CMD_ONENAND /* OneNAND support */ 67 #define CONFIG_CMD_PCI /* pciinfo */ 68 #define CONFIG_CMD_PCMCIA /* PCMCIA support */ 69 #define CONFIG_CMD_PING /* ping support */ 70 #define CONFIG_CMD_PORTIO /* Port I/O */ 71 #define CONFIG_CMD_REGINFO /* Register dump */ 72 #define CONFIG_CMD_REISER /* Reiserfs support */ 73 #define CONFIG_CMD_RUN /* run command in env variable */ 74 #define CONFIG_CMD_SAVEENV /* saveenv */ 75 #define CONFIG_CMD_SAVES /* save S record dump */ 76 #define CONFIG_CMD_SCSI /* SCSI Support */ 77 #define CONFIG_CMD_SDRAM /* SDRAM DIMM SPD info printout */ 78 #define CONFIG_CMD_SETEXPR /* setexpr support */ 79 #define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ 80 #define CONFIG_CMD_SNTP /* SNTP support */ 81 #define CONFIG_CMD_SOURCE /* "source" command support */ 82 #define CONFIG_CMD_SPI /* SPI utility */ 83 #define CONFIG_CMD_TERMINAL /* built-in Serial Terminal */ 84 #define CONFIG_CMD_UBI /* UBI Support */ 85 #define CONFIG_CMD_UBIFS /* UBIFS Support */ 86 #define CONFIG_CMD_UNIVERSE /* Tundra Universe Support */ 87 #define CONFIG_CMD_UNZIP /* unzip from memory to memory */ 88 #define CONFIG_CMD_USB /* USB Support */ 89 #define CONFIG_CMD_VFD /* VFD support (TRAB) */ 90 #define CONFIG_CMD_XIMG /* Load part of Multi Image */ 91 92 #endif /* _CONFIG_CMD_ALL_H */ 93