1#! /bin/sh 2# 3# Copyright (C) 1995-1998, 2000-2010 Free Software Foundation, Inc. 4# 5# This program is free software: you can redistribute it and/or modify 6# it under the terms of the GNU General Public License as published by 7# the Free Software Foundation; either version 3 of the License, or 8# (at your option) any later version. 9# 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY; without even the implied warranty of 12# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13# GNU General Public License for more details. 14# 15# You should have received a copy of the GNU General Public License 16# along with this program. If not, see <http://www.gnu.org/licenses/>. 17# 18 19# This file is meant for authors or maintainers which want to 20# internationalize their package with the help of GNU gettext. For 21# further information how to use it consult the GNU gettext manual. 22 23progname=$0 24package=gettext-tools 25version=0.18.1 26 27# Set variables 28# - gettext_dir directory where the sources are stored. 29prefix="/usr/local/i686-w64-mingw32/stow/gettext-0.18.1.1" 30datarootdir="${prefix}/share" 31gettext_dir="${datarootdir}/gettext" 32 33# func_tmpdir 34# creates a temporary directory. 35# Sets variable 36# - tmp pathname of freshly created temporary directory 37func_tmpdir () 38{ 39 # Use the environment variable TMPDIR, falling back to /tmp. This allows 40 # users to specify a different temporary directory, for example, if their 41 # /tmp is filled up or too small. 42 : ${TMPDIR=/tmp} 43 { 44 # Use the mktemp program if available. If not available, hide the error 45 # message. 46 tmp=`(umask 077 && mktemp -d "$TMPDIR/gtXXXXXX") 2>/dev/null` && 47 test -n "$tmp" && test -d "$tmp" 48 } || 49 { 50 # Use a simple mkdir command. It is guaranteed to fail if the directory 51 # already exists. $RANDOM is bash specific and expands to empty in shells 52 # other than bash, ksh and zsh. Its use does not increase security; 53 # rather, it minimizes the probability of failure in a very cluttered /tmp 54 # directory. 55 tmp=$TMPDIR/gt$$-$RANDOM 56 (umask 077 && mkdir "$tmp") 57 } || 58 { 59 echo "$0: cannot create a temporary directory in $TMPDIR" >&2 60 { (exit 1); exit 1; } 61 } 62} 63 64# Support for relocatability. 65func_find_curr_installdir () 66{ 67 # Determine curr_installdir, even taking into account symlinks. 68 curr_executable="$0" 69 case "$curr_executable" in 70 */* | *\\*) ;; 71 *) # Need to look in the PATH. 72 if test "${PATH_SEPARATOR+set}" != set; then 73 func_tmpdir 74 { echo "#! /bin/sh"; echo "exit 0"; } > "$tmp"/conf.sh 75 chmod +x "$tmp"/conf.sh 76 if (PATH="/nonexistent;$tmp"; conf.sh) >/dev/null 2>&1; then 77 PATH_SEPARATOR=';' 78 else 79 PATH_SEPARATOR=: 80 fi 81 rm -rf "$tmp" 82 fi 83 save_IFS="$IFS"; IFS="$PATH_SEPARATOR" 84 for dir in $PATH; do 85 IFS="$save_IFS" 86 test -z "$dir" && dir=. 87 for exec_ext in ''; do 88 if test -f "$dir/$curr_executable$exec_ext"; then 89 curr_executable="$dir/$curr_executable$exec_ext" 90 break 2 91 fi 92 done 93 done 94 IFS="$save_IFS" 95 ;; 96 esac 97 # Make absolute. 98 case "$curr_executable" in 99 /* | ?:/* | ?:\\*) ;; 100 *) curr_executable=`pwd`/"$curr_executable" ;; 101 esac 102 # Resolve symlinks. 103 sed_dirname='s,/[^/]*$,,' 104 sed_linkdest='s,^.* -> \(.*\),\1,p' 105 while : ; do 106 lsline=`LC_ALL=C ls -l "$curr_executable"` 107 case "$lsline" in 108 *" -> "*) 109 linkdest=`echo "$lsline" | sed -n -e "$sed_linkdest"` 110 case "$linkdest" in 111 /* | ?:/* | ?:\\*) curr_executable="$linkdest" ;; 112 *) curr_executable=`echo "$curr_executable" | sed -e "$sed_dirname"`/"$linkdest" ;; 113 esac ;; 114 *) break ;; 115 esac 116 done 117 curr_installdir=`echo "$curr_executable" | sed -e 's,/[^/]*$,,'` 118 # Canonicalize. 119 curr_installdir=`cd "$curr_installdir" && pwd` 120} 121func_find_prefixes () 122{ 123 # Compute the original/current installation prefixes by stripping the 124 # trailing directories off the original/current installation directories. 125 orig_installprefix="$orig_installdir" 126 curr_installprefix="$curr_installdir" 127 while true; do 128 orig_last=`echo "$orig_installprefix" | sed -n -e 's,^.*/\([^/]*\)$,\1,p'` 129 curr_last=`echo "$curr_installprefix" | sed -n -e 's,^.*/\([^/]*\)$,\1,p'` 130 if test -z "$orig_last" || test -z "$curr_last"; then 131 break 132 fi 133 if test "$orig_last" != "$curr_last"; then 134 break 135 fi 136 orig_installprefix=`echo "$orig_installprefix" | sed -e 's,/[^/]*$,,'` 137 curr_installprefix=`echo "$curr_installprefix" | sed -e 's,/[^/]*$,,'` 138 done 139} 140if test "no" = yes; then 141 exec_prefix="${prefix}" 142 bindir="${exec_prefix}/bin" 143 orig_installdir="$bindir" # see Makefile.am's *_SCRIPTS variables 144 func_find_curr_installdir # determine curr_installdir 145 func_find_prefixes 146 # Relocate the directory variables that we use. 147 gettext_dir=`echo "$gettext_dir/" | sed -e "s%^${orig_installprefix}/%${curr_installprefix}/%" | sed -e 's,/$,,'` 148fi 149 150# func_usage 151# outputs to stdout the --help usage message. 152func_usage () 153{ 154 echo "\ 155Usage: gettextize [OPTION]... [package-dir] 156 157Prepares a source package to use gettext. 158 159Options: 160 --help print this help and exit 161 --version print version information and exit 162 -f, --force force writing of new files even if old exist 163 --intl install libintl in a subdirectory (deprecated) 164 --po-dir=DIR specify directory with PO files 165 --no-changelog don't update or create ChangeLog files 166 --symlink make symbolic links instead of copying files 167 -n, --dry-run print modifications but don't perform them 168 169Report bugs to <bug-gnu-gettext@gnu.org>." 170} 171 172# func_version 173# outputs to stdout the --version message. 174func_version () 175{ 176 echo "$progname (GNU $package) $version" 177 echo "Copyright (C) 1995-1998, 2000-2010 Free Software Foundation, Inc. 178License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> 179This is free software: you are free to change and redistribute it. 180There is NO WARRANTY, to the extent permitted by law." 181 echo "Written by" "Ulrich Drepper" 182} 183 184# func_fatal_error message 185# outputs to stderr a fatal error message, and terminates the program. 186func_fatal_error () 187{ 188 echo "gettextize: *** $1" 1>&2 189 echo "gettextize: *** Stop." 1>&2 190 exit 1 191} 192 193# Nuisances. 194(unset CDPATH) >/dev/null 2>&1 && unset CDPATH 195 196# Command-line option processing. 197# Removes the OPTIONS from the arguments. Sets the variables: 198# - force 1 if --force was given, 0 otherwise 199# - intldir yes if --intl was given, empty otherwise 200# - podirs list of directories specified with --po-dir 201# - try_ln_s : if --symlink was given, false otherwise 202# - do_changelog false if --no-changelog was given, : otherwise 203# - doit false if --dry-run was given, : otherwise 204{ 205 force=0 206 intldir= 207 podirs= 208 try_ln_s=false 209 do_changelog=: 210 doit=: 211 212 while test $# -gt 0; do 213 case "$1" in 214 -c | --copy | --cop | --co | --c ) # accepted for backward compatibility 215 shift ;; 216 -n | --dry-run | --dry-ru | --dry-r | --dry- | --dry | --dr | --d ) 217 shift 218 doit=false ;; 219 -f | --force | --forc | --for | --fo | --f ) 220 shift 221 force=1 ;; 222 --help | --hel | --he | --h ) 223 func_usage; exit 0 ;; 224 --intl | --int | --in | --i ) 225 shift 226 intldir=yes ;; 227 --po-dir | --po-di | --po-d | --po- | --po | --p ) 228 shift 229 if test $# = 0; then 230 func_fatal_error "missing argument for --po-dir" 231 fi 232 case "$1" in 233 -*) func_fatal_error "missing argument for --po-dir" ;; 234 esac 235 podirs="$podirs $1" 236 shift ;; 237 --po-dir=* ) 238 arg=`echo "X$1" | sed -e 's/^X--po-dir=//'` 239 podirs="$podirs $arg" 240 shift ;; 241 --no-changelog | --no-changelo | --no-changel | --no-change | --no-chang | --no-chan | --no-cha | --no-ch | --no-c ) 242 shift 243 do_changelog=false ;; 244 --symlink | --symlin | --symli | --syml | --sym | --sy | --s ) 245 shift 246 try_ln_s=: ;; 247 --version | --versio | --versi | --vers | --ver | --ve | --v ) 248 func_version 249 exit 0 ;; 250 -- ) # Stop option prcessing 251 shift; break ;; 252 -* ) 253 echo "gettextize: unknown option $1" 1>&2 254 echo "Try 'gettextize --help' for more information." 1>&2 255 exit 1 ;; 256 * ) 257 break ;; 258 esac 259 done 260 # podirs defaults to "po". 261 test -n "$podirs" || podirs="po" 262} 263 264# Warn about deprecated options. 265if test -n "$intldir"; then 266 echo "gettextize: warning: the option '--intl' is deprecated and will be removed" 1>&2 267fi 268 269# Command-line argument processing. 270# Analyzes the remaining arguments. 271# Sets the variables 272# - origdir to the original directory, 273# - srcdir to the package directory, and cd-s into it. 274{ 275 if test $# -gt 1; then 276 func_usage 1>&2 277 exit 1 278 fi 279 origdir=`pwd` 280 if test $# -eq 1; then 281 srcdir=$1 282 if cd "$srcdir"; then 283 srcdir=`pwd` 284 else 285 func_fatal_error "Cannot change directory to '$srcdir'." 286 fi 287 else 288 srcdir=$origdir 289 fi 290} 291 292# The current directory is now $srcdir. 293 294# Check integrity of package: A configure.in/ac must be present. Sets variable 295# - configure_in name of configure.in/ac file. 296test -f configure.in || test -f configure.ac || 297 func_fatal_error "Missing configure.in or configure.ac, please cd to your package first." 298configure_in=NONE 299if test -f configure.in; then 300 configure_in=configure.in 301else 302 if test -f configure.ac; then 303 configure_in=configure.ac 304 fi 305fi 306 307# Check whether the --force option is needed but has not been specified. 308if test $force -eq 0; then 309 if test -d intl; then 310 func_fatal_error "intl/ subdirectory exists: use option -f if you really want to delete it." 311 fi 312 for podir in $podirs; do 313 if test -f "$podir/Makefile.in.in"; then 314 func_fatal_error "$podir/Makefile.in.in exists: use option -f if you really want to delete it." 315 fi 316 done 317 if test -f ABOUT-NLS; then 318 func_fatal_error "ABOUT-NLS exists: use option -f if you really want to delete it." 319 fi 320fi 321 322# Check in which directory config.rpath etc. belong. 323auxdir=`cat "$configure_in" | grep '^AC_CONFIG_AUX_DIR' | sed -n -e 's/AC_CONFIG_AUX_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q` 324if test -n "$auxdir"; then 325 auxdir="$auxdir/" 326fi 327 328# For simplicity we change to the gettext source directory. 329cd "$gettext_dir" || 330 func_fatal_error "gettext source directory '${gettext_dir}' doesn't exist" 331 332# Variables which keep track what has been modified. 333added_directories= 334removed_directory= 335added_extradist= 336added_acoutput= 337removed_acoutput=" intl/intlh.inst" 338 339# Variable: 340# - please accumulates instructions for the user. 341please= 342 343# Variable: 344# - date current date, for use in ChangeLog entries. 345date=`date +%Y-%m-%d` 346 347# func_copy from to 348# copies a file. 349# 'from' is a relative pathname, relative to the current directory. 350# 'to' is a relative pathname, relative to $srcdir. 351func_copy () 352{ 353 if $doit; then 354 rm -f "$srcdir/$2" 355 echo "Copying file $2" 356 cp "$1" "$srcdir/$2" 357 else 358 echo "Copy file $2" 359 fi 360} 361 362# func_linkorcopy from absfrom to 363# links or copies a file. 364# 'from' is a relative pathname, relative to the current directory. 365# 'absfrom' is the corresponding absolute pathname. 366# 'to' is a relative pathname, relative to $srcdir. 367func_linkorcopy () 368{ 369 if $doit; then 370 rm -f "$srcdir/$3" 371 ($try_ln_s && ln -s "$2" "$srcdir/$3" && echo "Symlinking file $3") 2>/dev/null || 372 { echo "Copying file $3"; cp "$1" "$srcdir/$3"; } 373 else 374 if $try_ln_s; then 375 echo "Symlink file $3" 376 else 377 echo "Copy file $3" 378 fi 379 fi 380} 381 382# func_backup to 383# makes a backup of a file that is about to be overwritten or replaced. 384# 'to' is a relative pathname, relative to $srcdir. 385func_backup () 386{ 387 if $doit; then 388 if test -f "$srcdir/$1"; then 389 rm -f "$srcdir/$1~" 390 cp -p "$srcdir/$1" "$srcdir/$1~" 391 fi 392 fi 393} 394 395# func_remove to 396# removes a file. 397# 'to' is a relative pathname, relative to $srcdir. 398func_remove () 399{ 400 if $doit; then 401 echo "Removing $1" 402 rm -f "$srcdir/$1" 403 else 404 echo "Remove $1" 405 fi 406} 407 408# func_ChangeLog_init 409# func_ChangeLog_add_entry line 410# func_ChangeLog_finish 411# manage the ChangeLog file, relative to $srcdir. 412func_ChangeLog_init () 413{ 414 modified_ChangeLog= 415} 416func_ChangeLog_add_entry () 417{ 418 if $doit; then 419 if test -z "$modified_ChangeLog"; then 420 echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/ChangeLog.tmp" 421 echo >> "$srcdir/ChangeLog.tmp" 422 modified_ChangeLog=yes 423 fi 424 echo "$1" >> "$srcdir/ChangeLog.tmp" 425 else 426 modified_ChangeLog=yes 427 fi 428} 429func_ChangeLog_finish () 430{ 431 if test -n "$modified_ChangeLog"; then 432 if $doit; then 433 echo >> "$srcdir/ChangeLog.tmp" 434 if test -f "$srcdir/ChangeLog"; then 435 echo "Adding an entry to ChangeLog (backup is in ChangeLog~)" 436 cat "$srcdir/ChangeLog" >> "$srcdir/ChangeLog.tmp" 437 rm -f "$srcdir/ChangeLog~" 438 cp -p "$srcdir/ChangeLog" "$srcdir/ChangeLog~" 439 else 440 echo "Creating ChangeLog" 441 fi 442 cp "$srcdir/ChangeLog.tmp" "$srcdir/ChangeLog" 443 rm -f "$srcdir/ChangeLog.tmp" 444 else 445 if test -f "$srcdir/ChangeLog"; then 446 echo "Add an entry to ChangeLog" 447 else 448 echo "Create ChangeLog" 449 fi 450 fi 451 fi 452} 453 454# func_poChangeLog_init 455# func_poChangeLog_add_entry line 456# func_poChangeLog_finish 457# manage the $podir/ChangeLog file, relative to $srcdir. 458func_poChangeLog_init () 459{ 460 modified_poChangeLog= 461} 462func_poChangeLog_add_entry () 463{ 464 if $doit; then 465 if test -z "$modified_poChangeLog"; then 466 echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/$podir/ChangeLog.tmp" 467 echo >> "$srcdir/$podir/ChangeLog.tmp" 468 modified_poChangeLog=yes 469 fi 470 echo "$1" >> "$srcdir/$podir/ChangeLog.tmp" 471 else 472 modified_poChangeLog=yes 473 fi 474} 475func_poChangeLog_finish () 476{ 477 if test -n "$modified_poChangeLog"; then 478 if $doit; then 479 echo >> "$srcdir/$podir/ChangeLog.tmp" 480 if test -f "$srcdir/$podir/ChangeLog"; then 481 echo "Adding an entry to $podir/ChangeLog (backup is in $podir/ChangeLog~)" 482 cat "$srcdir/$podir/ChangeLog" >> "$srcdir/$podir/ChangeLog.tmp" 483 rm -f "$srcdir/$podir/ChangeLog~" 484 cp -p "$srcdir/$podir/ChangeLog" "$srcdir/$podir/ChangeLog~" 485 else 486 echo "Creating $podir/ChangeLog" 487 fi 488 cp "$srcdir/$podir/ChangeLog.tmp" "$srcdir/$podir/ChangeLog" 489 rm -f "$srcdir/$podir/ChangeLog.tmp" 490 else 491 if test -f "$srcdir/$podir/ChangeLog"; then 492 echo "Add an entry to $podir/ChangeLog" 493 else 494 echo "Create $podir/ChangeLog" 495 fi 496 fi 497 fi 498} 499 500# func_m4ChangeLog_init 501# func_m4ChangeLog_add_entry line 502# func_m4ChangeLog_finish 503# manage the $m4dir/ChangeLog file, relative to $srcdir. 504func_m4ChangeLog_init () 505{ 506 if test -n "$using_m4ChangeLog"; then 507 modified_m4ChangeLog= 508 created_m4ChangeLog= 509 fi 510} 511func_m4ChangeLog_add_entry () 512{ 513 if test -n "$using_m4ChangeLog"; then 514 if $doit; then 515 if test -z "$modified_m4ChangeLog"; then 516 echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/$m4dir/ChangeLog.tmp" 517 echo >> "$srcdir/$m4dir/ChangeLog.tmp" 518 modified_m4ChangeLog=yes 519 fi 520 echo "$1" >> "$srcdir/$m4dir/ChangeLog.tmp" 521 else 522 modified_m4ChangeLog=yes 523 fi 524 else 525 line="$1" 526 line=`echo "$line" | sed -e "s%^ \\* % * $m4dir/%"` 527 func_ChangeLog_add_entry "$line" 528 fi 529} 530func_m4ChangeLog_finish () 531{ 532 if test -n "$using_m4ChangeLog"; then 533 if test -n "$modified_m4ChangeLog"; then 534 if $doit; then 535 echo >> "$srcdir/$m4dir/ChangeLog.tmp" 536 if test -f "$srcdir/$m4dir/ChangeLog"; then 537 echo "Adding an entry to $m4dir/ChangeLog (backup is in $m4dir/ChangeLog~)" 538 cat "$srcdir/$m4dir/ChangeLog" >> "$srcdir/$m4dir/ChangeLog.tmp" 539 rm -f "$srcdir/$m4dir/ChangeLog~" 540 cp -p "$srcdir/$m4dir/ChangeLog" "$srcdir/$m4dir/ChangeLog~" 541 else 542 echo "Creating $m4dir/ChangeLog" 543 created_m4ChangeLog=yes 544 fi 545 cp "$srcdir/$m4dir/ChangeLog.tmp" "$srcdir/$m4dir/ChangeLog" 546 rm -f "$srcdir/$m4dir/ChangeLog.tmp" 547 else 548 if test -f "$srcdir/$m4dir/ChangeLog"; then 549 echo "Add an entry to $m4dir/ChangeLog" 550 else 551 echo "Create $m4dir/ChangeLog" 552 created_m4ChangeLog=yes 553 fi 554 fi 555 fi 556 fi 557} 558using_m4ChangeLog=yes 559 560if test ! -f "$srcdir/intl/Makefile.in" && test -n "$intldir"; then 561 added_acoutput="$added_acoutput intl/Makefile" 562fi 563if test -f "$srcdir/intl/Makefile.in" && test -z "$intldir"; then 564 removed_acoutput="$removed_acoutput intl/Makefile" 565fi 566if test -d "$srcdir/intl"; then 567 # Remove everything inside intl except for RCS and CVS subdirs and invisible 568 # files. 569 if $doit; then 570 echo "Wiping out intl/ subdirectory" 571 (cd "$srcdir/intl" && 572 for f in *; do 573 if test CVS != "$f" && test RCS != "$f"; then 574 rm -rf "$f" 575 fi 576 done) 577 else 578 echo "Wipe out intl/ subdirectory" 579 fi 580 if test -z "$intldir"; then 581 removed_directory=intl 582 fi 583else 584 if test -n "$intldir"; then 585 if $doit; then 586 echo "Creating intl/ subdirectory" 587 mkdir "$srcdir/intl" || func_fatal_error "failed to create intl/ subdirectory" 588 else 589 echo "Create intl/ subdirectory" 590 fi 591 added_directories="$added_directories intl" 592 fi 593fi 594 595$do_changelog && func_ChangeLog_init 596 597for podir in $podirs; do 598 test -d "$srcdir/$podir" || { 599 if $doit; then 600 echo "Creating $podir/ subdirectory" 601 mkdir "$srcdir/$podir" || func_fatal_error "failed to create $podir/ subdirectory" 602 else 603 echo "Create $podir/ subdirectory" 604 fi 605 added_directories="$added_directories $podir" 606 } 607done 608 609# Create the directory for config.rpath, if needed. 610# This is for consistency with autoreconf and automake. 611# Note that $auxdir is either empty or ends in a slash. 612test -d "$srcdir/$auxdir" || { 613 if $doit; then 614 echo "Creating $auxdir subdirectory" 615 mkdir "$srcdir/$auxdir" || func_fatal_error "failed to create $auxdir subdirectory" 616 else 617 echo "Create $auxdir subdirectory" 618 fi 619} 620 621# Now copy all files. Take care for the destination directories. 622for file in *; do 623 case $file in 624 ABOUT-NLS) 625 func_linkorcopy $file "$gettext_dir/$file" $file 626 ;; 627 config.rpath) 628 if test -f "$srcdir/$auxdir$file"; then 629 : 630 else 631 added_extradist="$added_extradist $auxdir$file" 632 fi 633 func_linkorcopy $file "$gettext_dir/$file" "$auxdir$file" 634 ;; 635 esac 636done 637 638# Copy files to intl/ subdirectory. 639if test -n "$intldir"; then 640 cd intl 641 for file in *; do 642 if test $file != COPYING.LIB-2.0 && test $file != COPYING.LIB-2.1; then 643 if test $file != plural.c; then 644 func_linkorcopy $file "$gettext_dir/intl/$file" intl/$file 645 else 646 # plural.c is a generated file; it must be copied and touched. 647 func_copy $file intl/$file 648 if $doit; then 649 (sleep 2; touch "$srcdir/intl/$file") & 650 fi 651 fi 652 fi 653 done 654 cd .. 655else 656 echo "Not copying intl/ directory." 657 # Tell the user what to put into configure.ac, if it is not already there. 658 if grep '^AM_GNU_GETTEXT([[]\?external[]]\?[ ]*[,)]' "$srcdir/$configure_in" > /dev/null; then 659 : 660 else 661 please="$please 662Please use AM_GNU_GETTEXT([external]) in order to cause autoconfiguration 663to look for an external libintl. 664" 665 fi 666fi 667 668# Copy files to po/ subdirectory. 669cd po 670for podir in $podirs; do 671 $do_changelog && func_poChangeLog_init 672 for file in Makefile.in.in; do 673 same=no 674 if test -f "$srcdir/$podir/$file"; then 675 if cmp -s $file "$srcdir/$podir/$file"; then 676 same=yes 677 fi 678 else 679 added_acoutput="$added_acoutput $podir/Makefile.in" 680 fi 681 if $do_changelog && test $same = no; then 682 if test -f "$srcdir/$podir/$file"; then 683 func_poChangeLog_add_entry " * $file: Upgrade to gettext-${version}." 684 else 685 func_poChangeLog_add_entry " * $file: New file, from gettext-${version}." 686 fi 687 fi 688 func_backup "$podir/$file" 689 func_linkorcopy $file "$gettext_dir/po/$file" "$podir/$file" 690 done 691 for file in *; do 692 case $file in 693 Makefile.in.in) 694 # Already handled above. 695 ;; 696 Makevars.template) 697 func_linkorcopy Makevars.template "$gettext_dir/po/Makevars.template" "$podir/Makevars.template" 698 if test -f "$srcdir/po/Makevars"; then 699 LC_ALL=C sed -n -e 's/[ ]*\([A-Za-z0-9_]*\)[ ]*=.*/\1/p' < "$srcdir/$podir/Makevars" | LC_ALL=C sort > "$srcdir/$podir/Makevars.tmp1" 700 LC_ALL=C sed -n -e 's/[ ]*\([A-Za-z0-9_]*\)[ ]*=.*/\1/p' < "$srcdir/$podir/Makevars.template" | LC_ALL=C sort > "$srcdir/$podir/Makevars.tmp2" 701 missingvars=`LC_ALL=C comm -13 "$srcdir/$podir/Makevars.tmp1" "$srcdir/$podir/Makevars.tmp2"` 702 rm -f "$srcdir/$podir/Makevars.tmp1" "$srcdir/$podir/Makevars.tmp2" 703 if test -n "$missingvars"; then 704 please="$please 705Please update $podir/Makevars so that it defines all the variables mentioned 706in $podir/Makevars.template. 707You can then remove $podir/Makevars.template. 708" 709 fi 710 else 711 please="$please 712Please create $podir/Makevars from the template in $podir/Makevars.template. 713You can then remove $podir/Makevars.template. 714" 715 fi 716 ;; 717 *) 718 same=no 719 if test -f "$srcdir/$podir/$file"; then 720 if cmp -s $file "$srcdir/$podir/$file"; then 721 same=yes 722 fi 723 fi 724 if $do_changelog && test $same = no; then 725 if test -f "$srcdir/$podir/$file"; then 726 func_poChangeLog_add_entry " * $file: Upgrade to gettext-${version}." 727 else 728 func_poChangeLog_add_entry " * $file: New file, from gettext-${version}." 729 fi 730 fi 731 func_backup "$podir/$file" 732 func_linkorcopy $file "$gettext_dir/po/$file" "$podir/$file" 733 ;; 734 esac 735 done 736 if test -f "$srcdir/$podir/cat-id-tbl.c"; then 737 func_remove "$podir/cat-id-tbl.c" 738 $do_changelog && func_poChangeLog_add_entry " * cat-id-tbl.c: Remove file." 739 fi 740 if test -f "$srcdir/$podir/stamp-cat-id"; then 741 func_remove "$podir/stamp-cat-id" 742 $do_changelog && func_poChangeLog_add_entry " * stamp-cat-id: Remove file." 743 fi 744 if test ! -f "$srcdir/$podir/POTFILES.in"; then 745 if $doit; then 746 echo "Creating initial $podir/POTFILES.in" 747 echo '# List of source files which contain translatable strings.' > "$srcdir/$podir/POTFILES.in" 748 else 749 echo "Create initial $podir/POTFILES.in" 750 fi 751 $do_changelog && func_poChangeLog_add_entry " * POTFILES.in: New file." 752 please="$please 753Please fill $podir/POTFILES.in as described in the documentation. 754" 755 fi 756 $do_changelog && func_poChangeLog_finish 757done 758 759# Determine whether we can assume automake 1.9 or newer. 760have_automake19= 761if (aclocal --version) >/dev/null 2>/dev/null; then 762 aclocal_version=`aclocal --version | sed -n -e 1p | sed -e 's/^[^0-9]*//'` 763 case $aclocal_version in 764 1.9* | 1.[1-9][0-9]* | [2-9]*) have_automake19=yes ;; 765 esac 766fi 767 768m4filelist='gettext.m4 iconv.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 769 po.m4 progtest.m4' 770# With aclocal versions < 1.9 we need all m4 files, otherwise "aclocal -I m4" 771# might give an error. (aclocal < 1.9 didn't know which macros are really 772# needed, it looked which macros are potentially needed.) 773min_automake_version=1.9 774if test -n "$intldir" || test -z "$have_automake19"; then 775 # Add intldir.m4, intl.m4 and its dependencies. 776 m4filelist=$m4filelist' codeset.m4 fcntl-o.m4 glibc2.m4 glibc21.m4 intdiv0.m4 777 intl.m4 intldir.m4 intlmacosx.m4 intmax.m4 inttypes_h.m4 inttypes-pri.m4 778 lcmessage.m4 lock.m4 longlong.m4 printf-posix.m4 size_max.m4 stdint_h.m4 779 threadlib.m4 uintmax_t.m4 visibility.m4 wchar_t.m4 wint_t.m4 xsize.m4' 780 min_automake_version=1.8 781fi 782 783# All sorts of bugs could occur if the configure file was remade with the wrong 784# version of gettext.m4 et al. (because then the configure and the po/Makefile.in.in 785# don't fit together). It is therefore important that the package carries the 786# right versions of gettext.m4 et al. with it. 787if test -f "$srcdir/Makefile.am"; then 788 # A package using automake. 789 790 # Determine whether it's using automake 1.8 or newer. 791 have_automake18= 792 if (aclocal --version) >/dev/null 2>/dev/null; then 793 aclocal_version=`aclocal --version | sed -n -e 1p | sed -e 's/^[^0-9]*//'` 794 case $aclocal_version in 795 1.[8-9]* | 1.[1-9][0-9]* | [2-9]*) have_automake18=yes ;; 796 esac 797 fi 798 799 # Extract the macro directory name from Makefile.am. 800 aclocal_amflags=`grep '^ACLOCAL_AMFLAGS[ ]*=' "$srcdir/Makefile.am" | sed -e 's/^ACLOCAL_AMFLAGS[ ]*=\(.*\)$/\1/'` 801 m4dir=m4 802 m4dir_defaulted=yes 803 m4dir_is_next= 804 for arg in $aclocal_amflags; do 805 if test -n "$m4dir_is_next"; then 806 # Ignore absolute directory pathnames, like /usr/local/share/aclocal. 807 case "$arg" in 808 /*) ;; 809 *) 810 m4dir="$arg" 811 m4dir_defaulted= 812 break 813 ;; 814 esac 815 m4dir_is_next= 816 else 817 if test "X$arg" = "X-I"; then 818 m4dir_is_next=yes 819 else 820 m4dir_is_next= 821 fi 822 fi 823 done 824 825 # Decide whether to use $m4dir/ChangeLog, or to use ChangeLog instead. 826 if test -d "$srcdir/$m4dir" && test -f "$srcdir/ChangeLog" && test ! -f "$srcdir/$m4dir/ChangeLog"; then 827 # The programmer has no $m4dir/ChangeLog so far. Don't introduce one. 828 using_m4ChangeLog= 829 fi 830 831 # Update the *.m4 files and the corresponding Makefile.am. 832 $do_changelog && func_m4ChangeLog_init 833 added_m4dir= 834 added_m4files= 835 if test -d "$srcdir/$m4dir"; then 836 : 837 else 838 if $doit; then 839 echo "Creating directory $m4dir" 840 mkdir "$srcdir/$m4dir" 841 else 842 echo "Create directory $m4dir" 843 fi 844 added_m4dir=yes 845 fi 846 for file in $m4filelist; do 847 same=no 848 if test -f "$srcdir/$m4dir/$file"; then 849 if cmp -s "${datarootdir}/aclocal/$file" "$srcdir/$m4dir/$file"; then 850 same=yes 851 fi 852 else 853 added_m4files="$added_m4files $file" 854 fi 855 if $do_changelog && test $same = no; then 856 if test -f "$srcdir/$m4dir/$file"; then 857 func_m4ChangeLog_add_entry " * $file: Upgrade to gettext-${version}." 858 else 859 func_m4ChangeLog_add_entry " * $file: New file, from gettext-${version}." 860 fi 861 fi 862 func_backup "$m4dir/$file" 863 func_linkorcopy "${datarootdir}/aclocal/$file" "${datarootdir}/aclocal/$file" "$m4dir/$file" 864 done 865 missing_m4Makefileam= 866 if test -n "$added_m4files"; then 867 if test -f "$srcdir/$m4dir/Makefile.am"; then 868 if $doit; then 869 echo "Updating EXTRA_DIST in $m4dir/Makefile.am (backup is in $m4dir/Makefile.am~)" 870 func_backup "$m4dir/Makefile.am" 871 rm -f "$srcdir/$m4dir/Makefile.am" 872 if grep '^EXTRA_DIST[ ]*=' "$srcdir/$m4dir/Makefile.am~" > /dev/null; then 873 sed -e "s%^\(EXTRA_DIST[ ]*=\) \\?%\\1$added_m4files %" < "$srcdir/$m4dir/Makefile.am~" > "$srcdir/$m4dir/Makefile.am" 874 $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST): Add the new files." 875 else 876 (cat "$srcdir/$m4dir/Makefile.am~"; echo; echo "EXTRA_DIST =$added_m4files") > "$srcdir/$m4dir/Makefile.am" 877 $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST): New variable." 878 fi 879 else 880 echo "Update EXTRA_DIST in $m4dir/Makefile.am" 881 $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST)." 882 fi 883 else 884 # $m4dir/Makefile.am is not needed any more when aclocal 1.8 or newer 885 # is used. 886 if test -z "$have_automake18"; then 887 if $doit; then 888 echo "Creating $m4dir/Makefile.am" 889 echo "EXTRA_DIST =$added_m4files" > "$srcdir/$m4dir/Makefile.am" 890 else 891 echo "Create $m4dir/Makefile.am" 892 fi 893 $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am: New file." 894 added_acoutput="$added_acoutput $m4dir/Makefile" 895 else 896 missing_m4Makefileam=yes 897 fi 898 fi 899 fi 900 if test -n "$added_m4dir" && test -z "$missing_m4Makefileam"; then 901 added_directories="$added_directories $m4dir" 902 fi 903 $do_changelog && func_m4ChangeLog_finish 904 # automake will arrange for $m4dir/ChangeLog to be distributed if a 905 # $m4dir/Makefile.am exists. If not, we need to add it to Makefile.am's 906 # EXTRA_DIST explicitly. 907 if test -n "$created_m4ChangeLog" && test -n "$missing_m4Makefileam"; then 908 added_extradist="$added_extradist $m4dir/ChangeLog" 909 fi 910 911 # Update the top-level Makefile.am. 912 modified_Makefile_am= 913 # func_modify_Makefile_am changelog_comment 914 # assumes a modified copy of $srcdir/Makefile.am in $srcdir/Makefile.am.tmp 915 # and replaces the original Makefile.am file with the modified one if 916 # the two files differ. Then it removes the modified copy. 917 func_modify_Makefile_am () 918 { 919 if cmp -s "$srcdir/Makefile.am" "$srcdir/Makefile.am.tmp"; then 920 : 921 else 922 if test -z "$modified_Makefile_am"; then 923 if $doit; then 924 echo "Updating Makefile.am (backup is in Makefile.am~)" 925 func_backup Makefile.am 926 else 927 echo "Update Makefile.am" 928 fi 929 fi 930 if $doit; then 931 rm -f "$srcdir/Makefile.am" 932 cp "$srcdir/Makefile.am.tmp" "$srcdir/Makefile.am" 933 fi 934 if $do_changelog; then 935 if test -z "$modified_Makefile_am"; then 936 func_ChangeLog_add_entry " * Makefile.am $1" 937 else 938 func_ChangeLog_add_entry " $1" 939 fi 940 fi 941 modified_Makefile_am=yes 942 fi 943 rm -f "$srcdir/Makefile.am.tmp" 944 } 945 946 if test -n "$added_directories"; then 947 if grep '^SUBDIRS[ ]*=' "$srcdir/Makefile.am" > /dev/null; then 948 sed -e "s%^\(SUBDIRS[ ]*=\) \\?%\\1$added_directories %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" 949 added_directories_pretty=`echo $added_directories | sed -e 's/ /, /g'` 950 func_modify_Makefile_am "(SUBDIRS): Add $added_directories_pretty." 951 else 952 (cat "$srcdir/Makefile.am"; echo; echo "SUBDIRS =$added_directories") > "$srcdir/Makefile.am.tmp" 953 func_modify_Makefile_am "(SUBDIRS): New variable." 954 fi 955 fi 956 if test -n "$removed_directory"; then 957 sed -e '/^SUBDIRS[ ]*=/ { 958 :a 959 s%\([ ]\)'"$removed_directory"'[ ]%\1% 960 s%[ ]'"$removed_directory"'$%% 961 tb 962 :b 963 s%\\$%\\% 964 tc 965 bd 966 :c 967 n 968 ba 969 :d 970 }' < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" 971 func_modify_Makefile_am "(SUBDIRS): Remove $removed_directory." 972 fi 973 if test -n "$added_directories"; then 974 if grep '^DIST_SUBDIRS[ ]*=' "$srcdir/Makefile.am" > /dev/null; then 975 sed -e "s%^\(DIST_SUBDIRS[ ]*=\) \\?%\\1$added_directories %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" 976 added_directories_pretty=`echo $added_directories | sed -e 's/ /, /g'` 977 func_modify_Makefile_am "(DIST_SUBDIRS): Add $added_directories_pretty." 978 fi 979 fi 980 if test -n "$removed_directory"; then 981 sed -e '/^DIST_SUBDIRS[ ]*=/ { 982 :a 983 s%\([ ]\)'"$removed_directory"'[ ]%\1% 984 s%[ ]'"$removed_directory"'$%% 985 tb 986 :b 987 s%\\$%\\% 988 tc 989 bd 990 :c 991 n 992 ba 993 :d 994 }' < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" 995 func_modify_Makefile_am "(DIST_SUBDIRS): Remove $removed_directory." 996 fi 997 if test -n "$m4dir_defaulted"; then 998 if grep '^ACLOCAL_AMFLAGS[ ]*=' "$srcdir/Makefile.am" > /dev/null; then 999 sed -e "s%^\(ACLOCAL_AMFLAGS[ ]*=\) \\?%\\1 -I $m4dir %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" 1000 func_modify_Makefile_am "(ACLOCAL_AMFLAGS): Add -I $m4dir." 1001 else 1002 (cat "$srcdir/Makefile.am"; echo; echo "ACLOCAL_AMFLAGS = -I $m4dir") > "$srcdir/Makefile.am.tmp" 1003 func_modify_Makefile_am "(ACLOCAL_AMFLAGS): New variable." 1004 fi 1005 # Also update Makefile.in and, if existent, Makefile. Otherwise they 1006 # would take into account the new flags only after a few rounds of 1007 # "./configure", "make", "touch configure.in", "make distclean". 1008 if $doit; then 1009 for file in Makefile.in Makefile; do 1010 if test -f "$srcdir/$file"; then 1011 func_backup $file 1012 rm -f "$srcdir/$file" 1013 sed -e "s%(ACLOCAL)%(ACLOCAL) -I $m4dir%" < "$srcdir/$file~" > "$srcdir/$file" 1014 fi 1015 done 1016 fi 1017 fi 1018 if test -n "$added_extradist"; then 1019 if grep '^EXTRA_DIST[ ]*=' "$srcdir/Makefile.am" > /dev/null; then 1020 sed -e "s%^\(EXTRA_DIST[ ]*=\)%\\1$added_extradist %" < "$srcdir/Makefile.am" > "$srcdir/Makefile.am.tmp" 1021 added_extradist_pretty=`echo $added_extradist | sed -e 's/ /, /g'` 1022 func_modify_Makefile_am "(EXTRA_DIST): Add $added_extradist_pretty." 1023 else 1024 (cat "$srcdir/Makefile.am"; echo; echo "EXTRA_DIST =$added_extradist") > "$srcdir/Makefile.am.tmp" 1025 func_modify_Makefile_am "(EXTRA_DIST): New variable." 1026 fi 1027 fi 1028 # Extract the aclocal options name from Makefile.am. 1029 aclocal_amflags=`grep '^ACLOCAL_AMFLAGS[ ]*=' "$srcdir/Makefile.am" | sed -e 's/^ACLOCAL_AMFLAGS[ ]*=\(.*\)$/\1/'` 1030 aclocal_options= 1031 m4dir_is_next= 1032 for arg in $aclocal_amflags; do 1033 if test -n "$m4dir_is_next"; then 1034 aclocal_options="$aclocal_options -I $arg" 1035 m4dir_is_next= 1036 else 1037 if test "X$arg" = "X-I"; then 1038 m4dir_is_next=yes 1039 else 1040 m4dir_is_next= 1041 fi 1042 fi 1043 done 1044 please="$please 1045Please run 'aclocal$aclocal_options' to regenerate the aclocal.m4 file. 1046You need aclocal from GNU automake $min_automake_version (or newer) to do this. 1047Then run 'autoconf' to regenerate the configure file. 1048" 1049 1050 # Also create $m4dir/Makefile.in from $m4dir/Makefile.am, because automake 1051 # doesn't do it by itself. 1052 if $doit; then 1053 case "$added_acoutput" in 1054 *" $m4dir/Makefile") 1055 (cd "$srcdir" && automake "$m4dir/Makefile") 2>/dev/null || 1056 please="$please 1057Please run 'automake $m4dir/Makefile' to create $m4dir/Makefile.in 1058" 1059 ;; 1060 esac 1061 fi 1062else 1063 please="$please 1064Please add the files 1065$m4filelist 1066from the ${datarootdir}/aclocal directory to your aclocal.m4 file. 1067" 1068fi 1069 1070modified_configure_in= 1071# func_modify_configure_in changelog_comment 1072# assumes a modified copy of $srcdir/$configure_in in $srcdir/$configure_in.tmp 1073# and replaces the original configure.in/ac file with the modified one if 1074# the two files differ. Then it removes the modified copy. 1075func_modify_configure_in () 1076{ 1077 if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then 1078 : 1079 else 1080 if test -z "$modified_configure_in"; then 1081 if $doit; then 1082 echo "Updating $configure_in (backup is in $configure_in~)" 1083 func_backup $configure_in 1084 else 1085 echo "Update $configure_in" 1086 fi 1087 fi 1088 if $doit; then 1089 rm -f "$srcdir/$configure_in" 1090 cp "$srcdir/$configure_in.tmp" "$srcdir/$configure_in" 1091 fi 1092 if $do_changelog; then 1093 if test -z "$modified_configure_in"; then 1094 func_ChangeLog_add_entry " * $configure_in $1" 1095 else 1096 func_ChangeLog_add_entry " $1" 1097 fi 1098 fi 1099 modified_configure_in=yes 1100 fi 1101 rm -f "$srcdir/$configure_in.tmp" 1102} 1103 1104if test -n "$added_acoutput"; then 1105 if grep '^AC_CONFIG_FILES(' "$srcdir/$configure_in" > /dev/null; then 1106 sedprog=' 1107ta 1108b 1109:a 1110n 1111ba' 1112 sed -e "s%^\\(AC_CONFIG_FILES([^])\\,]*\\)%\\1$added_acoutput%$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" 1113 added_acoutput_pretty=`echo $added_acoutput | sed -e 's/ /, /g'` 1114 func_modify_configure_in "(AC_CONFIG_FILES): Add $added_acoutput_pretty." 1115 else 1116 if grep '^AC_OUTPUT(' "$srcdir/$configure_in" > /dev/null; then 1117 sed -e "s%^\\(AC_OUTPUT([^])\\,]*\\)%\\1$added_acoutput%" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" 1118 added_acoutput_pretty=`echo $added_acoutput | sed -e 's/ /, /g'` 1119 func_modify_configure_in "(AC_OUTPUT): Add $added_acoutput_pretty." 1120 else 1121 please="$please 1122Please add$added_acoutput to the AC_OUTPUT or AC_CONFIG_FILES invocation in the $configure_in file. 1123" 1124 fi 1125 fi 1126fi 1127if test -n "$removed_acoutput"; then 1128 for file in $removed_acoutput; do 1129 tag= 1130 sedprog='{ 1131 s%\([[ ]\)'"$file"'[ ]%\1% 1132 s%\([[ ]\)'"$file"'\([]),]\)%\1\2% 1133 s%[[ ]'"$file"'$%% 1134 :a 1135 tb 1136 :b 1137 s%\\$%\\% 1138 tc 1139 bd 1140 :c 1141 n 1142 s%\([ ]\)'"$file"'[ ]%\1% 1143 s%\([ ]\)'"$file"'\([]),]\)%\1\2% 1144 s%[ ]'"$file"'$%% 1145 ba 1146 :d 1147 }' 1148 sed -e '/^AC_CONFIG_FILES(/'"$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" 1149 if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then 1150 sed -e '/^AC_OUTPUT(/'"$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" 1151 if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then 1152 : 1153 else 1154 tag=AC_OUTPUT 1155 fi 1156 else 1157 tag=AC_CONFIG_FILES 1158 fi 1159 if test -n "$tag"; then 1160 func_modify_configure_in "($tag): Remove $file." 1161 else 1162 rm -f "$srcdir/$configure_in.tmp" 1163 if test "$file" != intl/intlh.inst; then 1164 please="$please 1165Please remove $file from the AC_OUTPUT or AC_CONFIG_FILES invocation 1166in the $configure_in file. 1167" 1168 fi 1169 fi 1170 done 1171fi 1172sed -e 's%sed -e "/POTFILES =/r po/POTFILES" po/Makefile\.in > po/Makefile *;* *%%' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" 1173func_modify_configure_in "(AC_OUTPUT): Remove command that created po/Makefile." 1174sed -e '/^\(dnl \|\)AC_LINK_FILES(\$nls_cv_header_libgt, \$nls_cv_header_intl)$/d' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" 1175func_modify_configure_in "(AC_LINK_FILES): Remove invocation." 1176sed -e 's/^AM_GNU_GETTEXT_VERSION([^()]*)/AM_GNU_GETTEXT_VERSION(['"$version"'])/' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp" 1177func_modify_configure_in "(AM_GNU_GETTEXT_VERSION): Bump to $version." 1178$do_changelog && func_ChangeLog_finish 1179 1180# Recommend replacement for deprecated Makefile variables. 1181use_libtool=`cat "$srcdir/$configure_in" | grep '^A[CM]_PROG_LIBTOOL'` 1182for file in `(cd "$srcdir"; find . -name Makefile.am -print; find . -name Makefile.in -print) | sed -e 's,^\./,,'`; do 1183 if test -f "$srcdir/$file"; then 1184 if test `echo "$file" | sed -e 's,^.*/,,'` = Makefile.in && grep automake "$srcdir/$file" >/dev/null 2>&1; then 1185 continue; 1186 fi 1187 # INTLLIBS is deprecated because it doesn't distinguish the two 1188 # cases: with libtool, without libtool. 1189 if grep '@''INTLLIBS''@' "$srcdir/$file" >/dev/null 2>&1; then 1190 if test -n "$use_libtool"; then 1191 please="$please 1192Please change $file to use @""LTLIBINTL""@ or @""LIBINTL""@ instead of 1193@""INTLLIBS""@. Which one, depends whether it is used with libtool or not. 1194@""INTLLIBS""@ will go away. 1195" 1196 else 1197 please="$please 1198Please change $file to use @""LIBINTL""@ instead of @""INTLLIBS""@. 1199@""INTLLIBS""@ will go away. 1200" 1201 fi 1202 fi 1203 # DATADIRNAME is deprecated because we install only .gmo files nowadays, 1204 # which can be stored in the platform independent $prefix/share hierarchy. 1205 if grep '@''DATADIRNAME''@' "$srcdir/$file" >/dev/null 2>&1; then 1206 please="$please 1207Please change $file to use the constant string \"share\" instead of 1208@""DATADIRNAME""@. @""DATADIRNAME""@ will go away. 1209" 1210 fi 1211 # INSTOBJEXT is deprecated because we install only .gmo files nowadays, 1212 # no catgets .cat catalogs. 1213 if grep '@''INSTOBJEXT''@' "$srcdir/$file" >/dev/null 2>&1; then 1214 please="$please 1215Please change $file to use the constant string \".mo\" instead of 1216@""INSTOBJEXT""@. @""INSTOBJEXT""@ will go away. 1217" 1218 fi 1219 # GENCAT is deprecated because we install no catgets catalogs anymore. 1220 if grep '@''GENCAT''@' "$srcdir/$file" >/dev/null 2>&1; then 1221 please="$please 1222Please change $file to use the constant string \"gencat\" instead of 1223@""GENCAT""@. @""GENCAT""@ will go away. Maybe you don't even need it any more? 1224" 1225 fi 1226 # POSUB is deprecated because it causes "./configure --disable-nls", "make", 1227 # "make dist" to create a buggy tarfile. 1228 if grep '@''POSUB''@' "$srcdir/$file" >/dev/null 2>&1; then 1229 please="$please 1230Please change $file to use the constant string \"po\" instead of 1231@""POSUB""@. @""POSUB""@ will go away. 1232" 1233 fi 1234 fi 1235done 1236 1237# Recommend replacement for deprecated configure variables. 1238if grep '\$nls_cv_header_' "$srcdir/$configure_in" >/dev/null 2>&1; then 1239 please="$please 1240Please stop using \$nls_cv_header_intl or \$nls_cv_header_libgt in the 1241$configure_in file. Both will go away. Use <libintl.h> or \"gettext.h\" instead. 1242" 1243fi 1244 1245# Recommend fetching config.guess and config.sub. 1246if test -f "$srcdir/$auxdir"config.guess && test -f "$srcdir/$auxdir"config.sub; then 1247 : 1248else 1249 please="$please 1250You will also need config.guess and config.sub, which you can get from the CVS 1251of the 'config' project at http://savannah.gnu.org/. The commands to fetch them 1252are 1253\$ wget 'http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess' 1254\$ wget 'http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub' 1255" 1256fi 1257 1258if $doit; then 1259 echo "$please" 1260 echo "You might also want to copy the convenience header file gettext.h" 1261 echo "from the $gettext_dir directory into your package." 1262 echo "It is a wrapper around <libintl.h> that implements the configure --disable-nls" 1263 echo "option." 1264 echo 1265 count=`echo "$please" | grep '^$' | wc -l` 1266 count=`echo "$count" | sed -e 's/[ ]//g'` 1267 case "$count" in 1268 1) count="paragraph";; 1269 2) count="two paragraphs";; 1270 3) count="three paragraphs";; 1271 4) count="four paragraphs";; 1272 5) count="five paragraphs";; 1273 *) count="$count paragraphs";; 1274 esac 1275 echo "Press Return to acknowledge the previous $count." 1276 # Read from /dev/tty, not stdin, so that gettextize cannot be abused by 1277 # non-interactive tools. 1278 read dummy < /dev/tty 1279fi 1280 1281exit 0 1282