1# Makefile.in generated by automake 1.10.2 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17VPATH = @srcdir@ 18pkgdatadir = $(datadir)/@PACKAGE@ 19pkglibdir = $(libdir)/@PACKAGE@ 20pkgincludedir = $(includedir)/@PACKAGE@ 21am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 22install_sh_DATA = $(install_sh) -c -m 644 23install_sh_PROGRAM = $(install_sh) -c 24install_sh_SCRIPT = $(install_sh) -c 25INSTALL_HEADER = $(INSTALL_DATA) 26transform = $(program_transform_name) 27NORMAL_INSTALL = : 28PRE_INSTALL = : 29POST_INSTALL = : 30NORMAL_UNINSTALL = : 31PRE_UNINSTALL = : 32POST_UNINSTALL = : 33build_triplet = @build@ 34host_triplet = @host@ 35subdir = . 36DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ 37 $(srcdir)/Makefile.in $(srcdir)/config.h.in \ 38 $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ 39 config.guess config.sub depcomp install-sh ltmain.sh missing 40ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 41am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ 42 $(top_srcdir)/configure.in 43am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 44 $(ACLOCAL_M4) 45am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 46 configure.lineno config.status.lineno 47mkinstalldirs = $(install_sh) -d 48CONFIG_HEADER = config.h 49CONFIG_CLEAN_FILES = 50SOURCES = 51DIST_SOURCES = 52RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 53 html-recursive info-recursive install-data-recursive \ 54 install-dvi-recursive install-exec-recursive \ 55 install-html-recursive install-info-recursive \ 56 install-pdf-recursive install-ps-recursive install-recursive \ 57 installcheck-recursive installdirs-recursive pdf-recursive \ 58 ps-recursive uninstall-recursive 59man1dir = $(mandir)/man1 60am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)" \ 61 "$(DESTDIR)$(shaderdir)" 62NROFF = nroff 63MANS = $(man_MANS) 64am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 65am__vpath_adj = case $$p in \ 66 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 67 *) f=$$p;; \ 68 esac; 69am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; 70nobase_docDATA_INSTALL = $(install_sh_DATA) 71shaderDATA_INSTALL = $(INSTALL_DATA) 72DATA = $(nobase_doc_DATA) $(shader_DATA) 73RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 74 distclean-recursive maintainer-clean-recursive 75ETAGS = etags 76CTAGS = ctags 77DIST_SUBDIRS = $(SUBDIRS) 78DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 79distdir = $(PACKAGE)-$(VERSION) 80top_distdir = $(distdir) 81am__remove_distdir = \ 82 { test ! -d $(distdir) \ 83 || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ 84 && rm -fr $(distdir); }; } 85DIST_ARCHIVES = $(distdir).tar.gz 86GZIP_ENV = --best 87distuninstallcheck_listfiles = find . -type f -print 88distcleancheck_listfiles = find . -type f -print 89ACLOCAL = @ACLOCAL@ 90ALLOCA = @ALLOCA@ 91AMTAR = @AMTAR@ 92AR = @AR@ 93AUTOCONF = @AUTOCONF@ 94AUTOHEADER = @AUTOHEADER@ 95AUTOMAKE = @AUTOMAKE@ 96AWK = @AWK@ 97BISON = @BISON@ 98BUILD_SHOW = @BUILD_SHOW@ 99CC = @CC@ 100CCDEPMODE = @CCDEPMODE@ 101CFLAGS = @CFLAGS@ 102CPP = @CPP@ 103CPPFLAGS = @CPPFLAGS@ 104CXX = @CXX@ 105CXXCPP = @CXXCPP@ 106CXXDEPMODE = @CXXDEPMODE@ 107CXXFLAGS = @CXXFLAGS@ 108CYGPATH_W = @CYGPATH_W@ 109DEFS = @DEFS@ 110DEPDIR = @DEPDIR@ 111DSYMUTIL = @DSYMUTIL@ 112DUMPBIN = @DUMPBIN@ 113ECHO_C = @ECHO_C@ 114ECHO_N = @ECHO_N@ 115ECHO_T = @ECHO_T@ 116EGREP = @EGREP@ 117EXEEXT = @EXEEXT@ 118FGREP = @FGREP@ 119FLEX = @FLEX@ 120FLTK_CONFIG = @FLTK_CONFIG@ 121FLTK_CXXFLAGS = @FLTK_CXXFLAGS@ 122FLTK_LDFLAGS = @FLTK_LDFLAGS@ 123GREP = @GREP@ 124INSTALL = @INSTALL@ 125INSTALL_DATA = @INSTALL_DATA@ 126INSTALL_PROGRAM = @INSTALL_PROGRAM@ 127INSTALL_SCRIPT = @INSTALL_SCRIPT@ 128INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 129LD = @LD@ 130LDFLAGS = @LDFLAGS@ 131LIBOBJS = @LIBOBJS@ 132LIBS = @LIBS@ 133LIBTOOL = @LIBTOOL@ 134LIPO = @LIPO@ 135LN_S = @LN_S@ 136LTLIBOBJS = @LTLIBOBJS@ 137MAKEINFO = @MAKEINFO@ 138MKDIR_P = @MKDIR_P@ 139NM = @NM@ 140NMEDIT = @NMEDIT@ 141OBJDUMP = @OBJDUMP@ 142OBJEXT = @OBJEXT@ 143OPENEXR_INCLUDES = @OPENEXR_INCLUDES@ 144OPENEXR_LDFLAGS = @OPENEXR_LDFLAGS@ 145OPENEXR_LIBS = @OPENEXR_LIBS@ 146OTOOL = @OTOOL@ 147OTOOL64 = @OTOOL64@ 148PACKAGE = @PACKAGE@ 149PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 150PACKAGE_NAME = @PACKAGE_NAME@ 151PACKAGE_STRING = @PACKAGE_STRING@ 152PACKAGE_TARNAME = @PACKAGE_TARNAME@ 153PACKAGE_VERSION = @PACKAGE_VERSION@ 154PATH_SEPARATOR = @PATH_SEPARATOR@ 155PIXIE_DISPLAYS = @PIXIE_DISPLAYS@ 156PIXIE_DOCS = @PIXIE_DOCS@ 157PIXIE_MODULES = @PIXIE_MODULES@ 158PIXIE_PROCEDURALS = @PIXIE_PROCEDURALS@ 159PIXIE_RIBS = @PIXIE_RIBS@ 160PIXIE_SHADERS = @PIXIE_SHADERS@ 161PIXIE_TEXTURES = @PIXIE_TEXTURES@ 162PNG_LIBS = @PNG_LIBS@ 163RANLIB = @RANLIB@ 164SED = @SED@ 165SET_MAKE = @SET_MAKE@ 166SHELL = @SHELL@ 167STRIP = @STRIP@ 168TIFF_LIBS = @TIFF_LIBS@ 169VERSION = @VERSION@ 170XMKMF = @XMKMF@ 171X_CFLAGS = @X_CFLAGS@ 172X_EXTRA_LIBS = @X_EXTRA_LIBS@ 173X_LDFLAGS = @X_LDFLAGS@ 174X_LIBS = @X_LIBS@ 175X_PRE_LIBS = @X_PRE_LIBS@ 176ZLIB_LIBS = @ZLIB_LIBS@ 177abs_builddir = @abs_builddir@ 178abs_srcdir = @abs_srcdir@ 179abs_top_builddir = @abs_top_builddir@ 180abs_top_srcdir = @abs_top_srcdir@ 181ac_ct_CC = @ac_ct_CC@ 182ac_ct_CXX = @ac_ct_CXX@ 183ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 184am__include = @am__include@ 185am__leading_dot = @am__leading_dot@ 186am__quote = @am__quote@ 187am__tar = @am__tar@ 188am__untar = @am__untar@ 189bindir = @bindir@ 190build = @build@ 191build_alias = @build_alias@ 192build_cpu = @build_cpu@ 193build_os = @build_os@ 194build_vendor = @build_vendor@ 195builddir = @builddir@ 196datadir = @datadir@ 197datarootdir = @datarootdir@ 198displaysdir = @displaysdir@ 199docdir = @docdir@ 200dvidir = @dvidir@ 201exec_prefix = @exec_prefix@ 202host = @host@ 203host_alias = @host_alias@ 204host_cpu = @host_cpu@ 205host_os = @host_os@ 206host_vendor = @host_vendor@ 207htmldir = @htmldir@ 208includedir = @includedir@ 209infodir = @infodir@ 210install_sh = @install_sh@ 211libdir = @libdir@ 212libexecdir = @libexecdir@ 213localedir = @localedir@ 214localstatedir = @localstatedir@ 215lt_ECHO = @lt_ECHO@ 216mandir = @mandir@ 217mkdir_p = @mkdir_p@ 218modulesdir = @modulesdir@ 219oldincludedir = @oldincludedir@ 220pdfdir = @pdfdir@ 221prefix = @prefix@ 222proceduraldir = @proceduraldir@ 223program_transform_name = @program_transform_name@ 224psdir = @psdir@ 225ribdir = @ribdir@ 226sbindir = @sbindir@ 227shaderdir = @shaderdir@ 228sharedstatedir = @sharedstatedir@ 229srcdir = @srcdir@ 230sysconfdir = @sysconfdir@ 231target_alias = @target_alias@ 232texturedir = @texturedir@ 233top_build_prefix = @top_build_prefix@ 234top_builddir = @top_builddir@ 235top_srcdir = @top_srcdir@ 236SUBDIRS = src doc 237man_MANS = man/rndr.1 man/sdrc.1 man/sdrinfo.1 man/texmake.1 238nobase_doc_DATA = AUTHORS ChangeLog COPYING DEVNOTES LICENSE NEWS README 239shader_DATA = shaders/* 240all: config.h 241 $(MAKE) $(AM_MAKEFLAGS) all-recursive 242 243.SUFFIXES: 244am--refresh: 245 @: 246$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 247 @for dep in $?; do \ 248 case '$(am__configure_deps)' in \ 249 *$$dep*) \ 250 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ 251 cd $(srcdir) && $(AUTOMAKE) --gnu \ 252 && exit 0; \ 253 exit 1;; \ 254 esac; \ 255 done; \ 256 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ 257 cd $(top_srcdir) && \ 258 $(AUTOMAKE) --gnu Makefile 259.PRECIOUS: Makefile 260Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 261 @case '$?' in \ 262 *config.status*) \ 263 echo ' $(SHELL) ./config.status'; \ 264 $(SHELL) ./config.status;; \ 265 *) \ 266 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 267 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 268 esac; 269 270$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 271 $(SHELL) ./config.status --recheck 272 273$(top_srcdir)/configure: $(am__configure_deps) 274 cd $(srcdir) && $(AUTOCONF) 275$(ACLOCAL_M4): $(am__aclocal_m4_deps) 276 cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 277 278config.h: stamp-h1 279 @if test ! -f $@; then \ 280 rm -f stamp-h1; \ 281 $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ 282 else :; fi 283 284stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 285 @rm -f stamp-h1 286 cd $(top_builddir) && $(SHELL) ./config.status config.h 287$(srcdir)/config.h.in: $(am__configure_deps) 288 cd $(top_srcdir) && $(AUTOHEADER) 289 rm -f stamp-h1 290 touch $@ 291 292distclean-hdr: 293 -rm -f config.h stamp-h1 294 295mostlyclean-libtool: 296 -rm -f *.lo 297 298clean-libtool: 299 -rm -rf .libs _libs 300 301distclean-libtool: 302 -rm -f libtool config.lt 303install-man1: $(man1_MANS) $(man_MANS) 304 @$(NORMAL_INSTALL) 305 test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" 306 @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ 307 l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ 308 for i in $$l2; do \ 309 case "$$i" in \ 310 *.1*) list="$$list $$i" ;; \ 311 esac; \ 312 done; \ 313 for i in $$list; do \ 314 if test -f $$i; then file=$$i; \ 315 else file=$(srcdir)/$$i; fi; \ 316 ext=`echo $$i | sed -e 's/^.*\\.//'`; \ 317 case "$$ext" in \ 318 1*) ;; \ 319 *) ext='1' ;; \ 320 esac; \ 321 inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ 322 inst=`echo $$inst | sed -e 's/^.*\///'`; \ 323 inst=`echo $$inst | sed '$(transform)'`.$$ext; \ 324 echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ 325 $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ 326 done 327uninstall-man1: 328 @$(NORMAL_UNINSTALL) 329 @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ 330 l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ 331 for i in $$l2; do \ 332 case "$$i" in \ 333 *.1*) list="$$list $$i" ;; \ 334 esac; \ 335 done; \ 336 for i in $$list; do \ 337 ext=`echo $$i | sed -e 's/^.*\\.//'`; \ 338 case "$$ext" in \ 339 1*) ;; \ 340 *) ext='1' ;; \ 341 esac; \ 342 inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ 343 inst=`echo $$inst | sed -e 's/^.*\///'`; \ 344 inst=`echo $$inst | sed '$(transform)'`.$$ext; \ 345 echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ 346 rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ 347 done 348install-nobase_docDATA: $(nobase_doc_DATA) 349 @$(NORMAL_INSTALL) 350 test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)" 351 @$(am__vpath_adj_setup) \ 352 list='$(nobase_doc_DATA)'; for p in $$list; do \ 353 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 354 $(am__vpath_adj) \ 355 echo " $(nobase_docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \ 356 $(nobase_docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \ 357 done 358 359uninstall-nobase_docDATA: 360 @$(NORMAL_UNINSTALL) 361 @$(am__vpath_adj_setup) \ 362 list='$(nobase_doc_DATA)'; for p in $$list; do \ 363 $(am__vpath_adj) \ 364 echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \ 365 rm -f "$(DESTDIR)$(docdir)/$$f"; \ 366 done 367install-shaderDATA: $(shader_DATA) 368 @$(NORMAL_INSTALL) 369 test -z "$(shaderdir)" || $(MKDIR_P) "$(DESTDIR)$(shaderdir)" 370 @list='$(shader_DATA)'; for p in $$list; do \ 371 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 372 f=$(am__strip_dir) \ 373 echo " $(shaderDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(shaderdir)/$$f'"; \ 374 $(shaderDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(shaderdir)/$$f"; \ 375 done 376 377uninstall-shaderDATA: 378 @$(NORMAL_UNINSTALL) 379 @list='$(shader_DATA)'; for p in $$list; do \ 380 f=$(am__strip_dir) \ 381 echo " rm -f '$(DESTDIR)$(shaderdir)/$$f'"; \ 382 rm -f "$(DESTDIR)$(shaderdir)/$$f"; \ 383 done 384 385# This directory's subdirectories are mostly independent; you can cd 386# into them and run `make' without going through this Makefile. 387# To change the values of `make' variables: instead of editing Makefiles, 388# (1) if the variable is set in `config.status', edit `config.status' 389# (which will cause the Makefiles to be regenerated when you run `make'); 390# (2) otherwise, pass the desired values on the `make' command line. 391$(RECURSIVE_TARGETS): 392 @failcom='exit 1'; \ 393 for f in x $$MAKEFLAGS; do \ 394 case $$f in \ 395 *=* | --[!k]*);; \ 396 *k*) failcom='fail=yes';; \ 397 esac; \ 398 done; \ 399 dot_seen=no; \ 400 target=`echo $@ | sed s/-recursive//`; \ 401 list='$(SUBDIRS)'; for subdir in $$list; do \ 402 echo "Making $$target in $$subdir"; \ 403 if test "$$subdir" = "."; then \ 404 dot_seen=yes; \ 405 local_target="$$target-am"; \ 406 else \ 407 local_target="$$target"; \ 408 fi; \ 409 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 410 || eval $$failcom; \ 411 done; \ 412 if test "$$dot_seen" = "no"; then \ 413 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 414 fi; test -z "$$fail" 415 416$(RECURSIVE_CLEAN_TARGETS): 417 @failcom='exit 1'; \ 418 for f in x $$MAKEFLAGS; do \ 419 case $$f in \ 420 *=* | --[!k]*);; \ 421 *k*) failcom='fail=yes';; \ 422 esac; \ 423 done; \ 424 dot_seen=no; \ 425 case "$@" in \ 426 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 427 *) list='$(SUBDIRS)' ;; \ 428 esac; \ 429 rev=''; for subdir in $$list; do \ 430 if test "$$subdir" = "."; then :; else \ 431 rev="$$subdir $$rev"; \ 432 fi; \ 433 done; \ 434 rev="$$rev ."; \ 435 target=`echo $@ | sed s/-recursive//`; \ 436 for subdir in $$rev; do \ 437 echo "Making $$target in $$subdir"; \ 438 if test "$$subdir" = "."; then \ 439 local_target="$$target-am"; \ 440 else \ 441 local_target="$$target"; \ 442 fi; \ 443 (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 444 || eval $$failcom; \ 445 done && test -z "$$fail" 446tags-recursive: 447 list='$(SUBDIRS)'; for subdir in $$list; do \ 448 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 449 done 450ctags-recursive: 451 list='$(SUBDIRS)'; for subdir in $$list; do \ 452 test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 453 done 454 455ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 456 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 457 unique=`for i in $$list; do \ 458 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 459 done | \ 460 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 461 END { if (nonempty) { for (i in files) print i; }; }'`; \ 462 mkid -fID $$unique 463tags: TAGS 464 465TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ 466 $(TAGS_FILES) $(LISP) 467 tags=; \ 468 here=`pwd`; \ 469 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 470 include_option=--etags-include; \ 471 empty_fix=.; \ 472 else \ 473 include_option=--include; \ 474 empty_fix=; \ 475 fi; \ 476 list='$(SUBDIRS)'; for subdir in $$list; do \ 477 if test "$$subdir" = .; then :; else \ 478 test ! -f $$subdir/TAGS || \ 479 tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ 480 fi; \ 481 done; \ 482 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ 483 unique=`for i in $$list; do \ 484 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 485 done | \ 486 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 487 END { if (nonempty) { for (i in files) print i; }; }'`; \ 488 if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ 489 test -n "$$unique" || unique=$$empty_fix; \ 490 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 491 $$tags $$unique; \ 492 fi 493ctags: CTAGS 494CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ 495 $(TAGS_FILES) $(LISP) 496 tags=; \ 497 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ 498 unique=`for i in $$list; do \ 499 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 500 done | \ 501 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 502 END { if (nonempty) { for (i in files) print i; }; }'`; \ 503 test -z "$(CTAGS_ARGS)$$tags$$unique" \ 504 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 505 $$tags $$unique 506 507GTAGS: 508 here=`$(am__cd) $(top_builddir) && pwd` \ 509 && cd $(top_srcdir) \ 510 && gtags -i $(GTAGS_ARGS) $$here 511 512distclean-tags: 513 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 514 515distdir: $(DISTFILES) 516 $(am__remove_distdir) 517 test -d $(distdir) || mkdir $(distdir) 518 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 519 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 520 list='$(DISTFILES)'; \ 521 dist_files=`for file in $$list; do echo $$file; done | \ 522 sed -e "s|^$$srcdirstrip/||;t" \ 523 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 524 case $$dist_files in \ 525 */*) $(MKDIR_P) `echo "$$dist_files" | \ 526 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 527 sort -u` ;; \ 528 esac; \ 529 for file in $$dist_files; do \ 530 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 531 if test -d $$d/$$file; then \ 532 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 533 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 534 cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ 535 fi; \ 536 cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ 537 else \ 538 test -f $(distdir)/$$file \ 539 || cp -p $$d/$$file $(distdir)/$$file \ 540 || exit 1; \ 541 fi; \ 542 done 543 list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 544 if test "$$subdir" = .; then :; else \ 545 test -d "$(distdir)/$$subdir" \ 546 || $(MKDIR_P) "$(distdir)/$$subdir" \ 547 || exit 1; \ 548 distdir=`$(am__cd) $(distdir) && pwd`; \ 549 top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ 550 (cd $$subdir && \ 551 $(MAKE) $(AM_MAKEFLAGS) \ 552 top_distdir="$$top_distdir" \ 553 distdir="$$distdir/$$subdir" \ 554 am__remove_distdir=: \ 555 am__skip_length_check=: \ 556 distdir) \ 557 || exit 1; \ 558 fi; \ 559 done 560 -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ 561 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 562 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 563 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 564 || chmod -R a+r $(distdir) 565dist-gzip: distdir 566 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 567 $(am__remove_distdir) 568 569dist-bzip2: distdir 570 tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 571 $(am__remove_distdir) 572 573dist-lzma: distdir 574 tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma 575 $(am__remove_distdir) 576 577dist-tarZ: distdir 578 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 579 $(am__remove_distdir) 580 581dist-shar: distdir 582 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 583 $(am__remove_distdir) 584 585dist-zip: distdir 586 -rm -f $(distdir).zip 587 zip -rq $(distdir).zip $(distdir) 588 $(am__remove_distdir) 589 590dist dist-all: distdir 591 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 592 $(am__remove_distdir) 593 594# This target untars the dist file and tries a VPATH configuration. Then 595# it guarantees that the distribution is self-contained by making another 596# tarfile. 597distcheck: dist 598 case '$(DIST_ARCHIVES)' in \ 599 *.tar.gz*) \ 600 GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ 601 *.tar.bz2*) \ 602 bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ 603 *.tar.lzma*) \ 604 unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ 605 *.tar.Z*) \ 606 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 607 *.shar.gz*) \ 608 GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ 609 *.zip*) \ 610 unzip $(distdir).zip ;;\ 611 esac 612 chmod -R a-w $(distdir); chmod a+w $(distdir) 613 mkdir $(distdir)/_build 614 mkdir $(distdir)/_inst 615 chmod a-w $(distdir) 616 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 617 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 618 && cd $(distdir)/_build \ 619 && ../configure --srcdir=.. --prefix="$$dc_install_base" \ 620 $(DISTCHECK_CONFIGURE_FLAGS) \ 621 && $(MAKE) $(AM_MAKEFLAGS) \ 622 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 623 && $(MAKE) $(AM_MAKEFLAGS) check \ 624 && $(MAKE) $(AM_MAKEFLAGS) install \ 625 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 626 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 627 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 628 distuninstallcheck \ 629 && chmod -R a-w "$$dc_install_base" \ 630 && ({ \ 631 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 632 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 633 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 634 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 635 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 636 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 637 && rm -rf "$$dc_destdir" \ 638 && $(MAKE) $(AM_MAKEFLAGS) dist \ 639 && rm -rf $(DIST_ARCHIVES) \ 640 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck 641 $(am__remove_distdir) 642 @(echo "$(distdir) archives ready for distribution: "; \ 643 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 644 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 645distuninstallcheck: 646 @cd $(distuninstallcheck_dir) \ 647 && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ 648 || { echo "ERROR: files left after uninstall:" ; \ 649 if test -n "$(DESTDIR)"; then \ 650 echo " (check DESTDIR support)"; \ 651 fi ; \ 652 $(distuninstallcheck_listfiles) ; \ 653 exit 1; } >&2 654distcleancheck: distclean 655 @if test '$(srcdir)' = . ; then \ 656 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 657 exit 1 ; \ 658 fi 659 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 660 || { echo "ERROR: files left in build directory after distclean:" ; \ 661 $(distcleancheck_listfiles) ; \ 662 exit 1; } >&2 663check-am: all-am 664check: check-recursive 665all-am: Makefile $(MANS) $(DATA) config.h 666installdirs: installdirs-recursive 667installdirs-am: 668 for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(shaderdir)"; do \ 669 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 670 done 671install: install-recursive 672install-exec: install-exec-recursive 673install-data: install-data-recursive 674uninstall: uninstall-recursive 675 676install-am: all-am 677 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 678 679installcheck: installcheck-recursive 680install-strip: 681 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 682 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 683 `test -z '$(STRIP)' || \ 684 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install 685mostlyclean-generic: 686 687clean-generic: 688 689distclean-generic: 690 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 691 692maintainer-clean-generic: 693 @echo "This command is intended for maintainers to use" 694 @echo "it deletes files that may require special tools to rebuild." 695clean: clean-recursive 696 697clean-am: clean-generic clean-libtool mostlyclean-am 698 699distclean: distclean-recursive 700 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 701 -rm -f Makefile 702distclean-am: clean-am distclean-generic distclean-hdr \ 703 distclean-libtool distclean-tags 704 705dvi: dvi-recursive 706 707dvi-am: 708 709html: html-recursive 710 711info: info-recursive 712 713info-am: 714 715install-data-am: install-man install-nobase_docDATA install-shaderDATA 716 717install-dvi: install-dvi-recursive 718 719install-exec-am: 720 721install-html: install-html-recursive 722 723install-info: install-info-recursive 724 725install-man: install-man1 726 727install-pdf: install-pdf-recursive 728 729install-ps: install-ps-recursive 730 731installcheck-am: 732 733maintainer-clean: maintainer-clean-recursive 734 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 735 -rm -rf $(top_srcdir)/autom4te.cache 736 -rm -f Makefile 737maintainer-clean-am: distclean-am maintainer-clean-generic 738 739mostlyclean: mostlyclean-recursive 740 741mostlyclean-am: mostlyclean-generic mostlyclean-libtool 742 743pdf: pdf-recursive 744 745pdf-am: 746 747ps: ps-recursive 748 749ps-am: 750 751uninstall-am: uninstall-man uninstall-nobase_docDATA \ 752 uninstall-shaderDATA 753 754uninstall-man: uninstall-man1 755 756.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ 757 install-strip 758 759.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ 760 all all-am am--refresh check check-am clean clean-generic \ 761 clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ 762 dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \ 763 distclean distclean-generic distclean-hdr distclean-libtool \ 764 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 765 dvi-am html html-am info info-am install install-am \ 766 install-data install-data-am install-dvi install-dvi-am \ 767 install-exec install-exec-am install-html install-html-am \ 768 install-info install-info-am install-man install-man1 \ 769 install-nobase_docDATA install-pdf install-pdf-am install-ps \ 770 install-ps-am install-shaderDATA install-strip installcheck \ 771 installcheck-am installdirs installdirs-am maintainer-clean \ 772 maintainer-clean-generic mostlyclean mostlyclean-generic \ 773 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ 774 uninstall uninstall-am uninstall-man uninstall-man1 \ 775 uninstall-nobase_docDATA uninstall-shaderDATA 776 777# Tell versions [3.59,3.63) of GNU make to not export all variables. 778# Otherwise a system limit (for SysV at least) may be exceeded. 779.NOEXPORT: 780