1# Doxyfile 1.4.5 2 3# This file describes the settings to be used by the documentation system 4# doxygen (www.doxygen.org) for a project 5# 6# All text after a hash (#) is considered a comment and will be ignored 7# The format is: 8# TAG = value [value, ...] 9# For lists items can also be appended using: 10# TAG += value [value, ...] 11# Values that contain spaces should be placed between quotes (" ") 12 13#--------------------------------------------------------------------------- 14# Project related configuration options 15#--------------------------------------------------------------------------- 16 17# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 18# by quotes) that should identify the project. 19 20PROJECT_NAME = tinyows 21 22# The PROJECT_NUMBER tag can be used to enter a project or revision number. 23# This could be handy for archiving the generated documentation or 24# if some version control system is used. 25 26PROJECT_NUMBER = 1.1.0 27 28# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 29# base path where the generated documentation will be put. 30# If a relative path is entered, it will be relative to the location 31# where doxygen was started. If left blank the current directory will be used. 32 33OUTPUT_DIRECTORY = doc 34 35# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 36# 4096 sub-directories (in 2 levels) under the output directory of each output 37# format and will distribute the generated files over these directories. 38# Enabling this option can be useful when feeding doxygen a huge amount of 39# source files, where putting all generated files in the same directory would 40# otherwise cause performance problems for the file system. 41 42CREATE_SUBDIRS = NO 43 44# The OUTPUT_LANGUAGE tag is used to specify the language in which all 45# documentation generated by doxygen is written. Doxygen will use this 46# information to generate all constant output in the proper language. 47# The default language is English, other supported languages are: 48# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 49# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 50# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 51# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 52# Swedish, and Ukrainian. 53 54OUTPUT_LANGUAGE = English 55 56# This tag can be used to specify the encoding used in the generated output. 57# The encoding is not always determined by the language that is chosen, 58# but also whether or not the output is meant for Windows or non-Windows users. 59# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 60# forces the Windows encoding (this is the default for the Windows binary), 61# whereas setting the tag to NO uses a Unix-style encoding (the default for 62# all platforms other than Windows). 63 64USE_WINDOWS_ENCODING = NO 65 66# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 67# include brief member descriptions after the members that are listed in 68# the file and class documentation (similar to JavaDoc). 69# Set to NO to disable this. 70 71BRIEF_MEMBER_DESC = YES 72 73# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 74# the brief description of a member or function before the detailed description. 75# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 76# brief descriptions will be completely suppressed. 77 78REPEAT_BRIEF = YES 79 80# This tag implements a quasi-intelligent brief description abbreviator 81# that is used to form the text in various listings. Each string 82# in this list, if found as the leading text of the brief description, will be 83# stripped from the text and the result after processing the whole list, is 84# used as the annotated text. Otherwise, the brief description is used as-is. 85# If left blank, the following values are used ("$name" is automatically 86# replaced with the name of the entity): "The $name class" "The $name widget" 87# "The $name file" "is" "provides" "specifies" "contains" 88# "represents" "a" "an" "the" 89 90ABBREVIATE_BRIEF = 91 92# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 93# Doxygen will generate a detailed section even if there is only a brief 94# description. 95 96ALWAYS_DETAILED_SEC = NO 97 98# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 99# inherited members of a class in the documentation of that class as if those 100# members were ordinary class members. Constructors, destructors and assignment 101# operators of the base classes will not be shown. 102 103INLINE_INHERITED_MEMB = NO 104 105# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 106# path before files name in the file list and in the header files. If set 107# to NO the shortest path that makes the file name unique will be used. 108 109FULL_PATH_NAMES = NO 110 111# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 112# can be used to strip a user-defined part of the path. Stripping is 113# only done if one of the specified strings matches the left-hand part of 114# the path. The tag can be used to show relative paths in the file list. 115# If left blank the directory from which doxygen is run is used as the 116# path to strip. 117 118STRIP_FROM_PATH = 119 120# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 121# the path mentioned in the documentation of a class, which tells 122# the reader which header file to include in order to use a class. 123# If left blank only the name of the header file containing the class 124# definition is used. Otherwise one should specify the include paths that 125# are normally passed to the compiler using the -I flag. 126 127STRIP_FROM_INC_PATH = 128 129# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 130# (but less readable) file names. This can be useful is your file systems 131# doesn't support long names like on DOS, Mac, or CD-ROM. 132 133SHORT_NAMES = NO 134 135# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 136# will interpret the first line (until the first dot) of a JavaDoc-style 137# comment as the brief description. If set to NO, the JavaDoc 138# comments will behave just like the Qt-style comments (thus requiring an 139# explicit @brief command for a brief description. 140 141JAVADOC_AUTOBRIEF = YES 142 143# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 144# treat a multi-line C++ special comment block (i.e. a block of //! or /// 145# comments) as a brief description. This used to be the default behaviour. 146# The new default is to treat a multi-line C++ comment block as a detailed 147# description. Set this tag to YES if you prefer the old behaviour instead. 148 149MULTILINE_CPP_IS_BRIEF = NO 150 151# If the DETAILS_AT_TOP tag is set to YES then Doxygen 152# will output the detailed description near the top, like JavaDoc. 153# If set to NO, the detailed description appears after the member 154# documentation. 155 156DETAILS_AT_TOP = YES 157 158# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 159# member inherits the documentation from any documented member that it 160# re-implements. 161 162INHERIT_DOCS = YES 163 164# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 165# a new page for each member. If set to NO, the documentation of a member will 166# be part of the file/class/namespace that contains it. 167 168SEPARATE_MEMBER_PAGES = NO 169 170# The TAB_SIZE tag can be used to set the number of spaces in a tab. 171# Doxygen uses this value to replace tabs by spaces in code fragments. 172 173TAB_SIZE = 8 174 175# This tag can be used to specify a number of aliases that acts 176# as commands in the documentation. An alias has the form "name=value". 177# For example adding "sideeffect=\par Side Effects:\n" will allow you to 178# put the command \sideeffect (or @sideeffect) in the documentation, which 179# will result in a user-defined paragraph with heading "Side Effects:". 180# You can put \n's in the value part of an alias to insert newlines. 181 182ALIASES = 183 184# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 185# sources only. Doxygen will then generate output that is more tailored for C. 186# For instance, some of the names that are used will be different. The list 187# of all members will be omitted, etc. 188 189OPTIMIZE_OUTPUT_FOR_C = YES 190 191# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 192# sources only. Doxygen will then generate output that is more tailored for Java. 193# For instance, namespaces will be presented as packages, qualified scopes 194# will look different, etc. 195 196OPTIMIZE_OUTPUT_JAVA = NO 197 198# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to 199# include (a tag file for) the STL sources as input, then you should 200# set this tag to YES in order to let doxygen match functions declarations and 201# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 202# func(std::string) {}). This also make the inheritance and collaboration 203# diagrams that involve STL classes more complete and accurate. 204 205BUILTIN_STL_SUPPORT = NO 206 207# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 208# tag is set to YES, then doxygen will reuse the documentation of the first 209# member in the group (if any) for the other members of the group. By default 210# all members of a group must be documented explicitly. 211 212DISTRIBUTE_GROUP_DOC = NO 213 214# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 215# the same type (for instance a group of public functions) to be put as a 216# subgroup of that type (e.g. under the Public Functions section). Set it to 217# NO to prevent subgrouping. Alternatively, this can be done per class using 218# the \nosubgrouping command. 219 220SUBGROUPING = YES 221 222#--------------------------------------------------------------------------- 223# Build related configuration options 224#--------------------------------------------------------------------------- 225 226# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 227# documentation are documented, even if no documentation was available. 228# Private class members and static file members will be hidden unless 229# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES 230 231EXTRACT_ALL = YES 232 233# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 234# will be included in the documentation. 235 236EXTRACT_PRIVATE = NO 237 238# If the EXTRACT_STATIC tag is set to YES all static members of a file 239# will be included in the documentation. 240 241EXTRACT_STATIC = YES 242 243# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 244# defined locally in source files will be included in the documentation. 245# If set to NO only classes defined in header files are included. 246 247EXTRACT_LOCAL_CLASSES = YES 248 249# This flag is only useful for Objective-C code. When set to YES local 250# methods, which are defined in the implementation section but not in 251# the interface are included in the documentation. 252# If set to NO (the default) only methods in the interface are included. 253 254EXTRACT_LOCAL_METHODS = NO 255 256# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 257# undocumented members of documented classes, files or namespaces. 258# If set to NO (the default) these members will be included in the 259# various overviews, but no documentation section is generated. 260# This option has no effect if EXTRACT_ALL is enabled. 261 262HIDE_UNDOC_MEMBERS = NO 263 264# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 265# undocumented classes that are normally visible in the class hierarchy. 266# If set to NO (the default) these classes will be included in the various 267# overviews. This option has no effect if EXTRACT_ALL is enabled. 268 269HIDE_UNDOC_CLASSES = NO 270 271# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 272# friend (class|struct|union) declarations. 273# If set to NO (the default) these declarations will be included in the 274# documentation. 275 276HIDE_FRIEND_COMPOUNDS = NO 277 278# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 279# documentation blocks found inside the body of a function. 280# If set to NO (the default) these blocks will be appended to the 281# function's detailed documentation block. 282 283HIDE_IN_BODY_DOCS = NO 284 285# The INTERNAL_DOCS tag determines if documentation 286# that is typed after a \internal command is included. If the tag is set 287# to NO (the default) then the documentation will be excluded. 288# Set it to YES to include the internal documentation. 289 290INTERNAL_DOCS = NO 291 292# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 293# file names in lower-case letters. If set to YES upper-case letters are also 294# allowed. This is useful if you have classes or files whose names only differ 295# in case and if your file system supports case sensitive file names. Windows 296# and Mac users are advised to set this option to NO. 297 298CASE_SENSE_NAMES = YES 299 300# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 301# will show members with their full class and namespace scopes in the 302# documentation. If set to YES the scope will be hidden. 303 304HIDE_SCOPE_NAMES = NO 305 306# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 307# will put a list of the files that are included by a file in the documentation 308# of that file. 309 310SHOW_INCLUDE_FILES = YES 311 312# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 313# is inserted in the documentation for inline members. 314 315INLINE_INFO = YES 316 317# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 318# will sort the (detailed) documentation of file and class members 319# alphabetically by member name. If set to NO the members will appear in 320# declaration order. 321 322SORT_MEMBER_DOCS = YES 323 324# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 325# brief documentation of file, namespace and class members alphabetically 326# by member name. If set to NO (the default) the members will appear in 327# declaration order. 328 329SORT_BRIEF_DOCS = NO 330 331# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 332# sorted by fully-qualified names, including namespaces. If set to 333# NO (the default), the class list will be sorted only by class name, 334# not including the namespace part. 335# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. 336# Note: This option applies only to the class list, not to the 337# alphabetical list. 338 339SORT_BY_SCOPE_NAME = NO 340 341# The GENERATE_TODOLIST tag can be used to enable (YES) or 342# disable (NO) the todo list. This list is created by putting \todo 343# commands in the documentation. 344 345GENERATE_TODOLIST = NO 346 347# The GENERATE_TESTLIST tag can be used to enable (YES) or 348# disable (NO) the test list. This list is created by putting \test 349# commands in the documentation. 350 351GENERATE_TESTLIST = NO 352 353# The GENERATE_BUGLIST tag can be used to enable (YES) or 354# disable (NO) the bug list. This list is created by putting \bug 355# commands in the documentation. 356 357GENERATE_BUGLIST = NO 358 359# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 360# disable (NO) the deprecated list. This list is created by putting 361# \deprecated commands in the documentation. 362 363GENERATE_DEPRECATEDLIST= NO 364 365# The ENABLED_SECTIONS tag can be used to enable conditional 366# documentation sections, marked by \if sectionname ... \endif. 367 368ENABLED_SECTIONS = 369 370# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 371# the initial value of a variable or define consists of for it to appear in 372# the documentation. If the initializer consists of more lines than specified 373# here it will be hidden. Use a value of 0 to hide initializers completely. 374# The appearance of the initializer of individual variables and defines in the 375# documentation can be controlled using \showinitializer or \hideinitializer 376# command in the documentation regardless of this setting. 377 378MAX_INITIALIZER_LINES = 30 379 380# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 381# at the bottom of the documentation of classes and structs. If set to YES the 382# list will mention the files that were used to generate the documentation. 383 384SHOW_USED_FILES = YES 385 386# If the sources in your project are distributed over multiple directories 387# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 388# in the documentation. The default is YES. 389 390SHOW_DIRECTORIES = NO 391 392# The FILE_VERSION_FILTER tag can be used to specify a program or script that 393# doxygen should invoke to get the current version for each file (typically from the 394# version control system). Doxygen will invoke the program by executing (via 395# popen()) the command <command> <input-file>, where <command> is the value of 396# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 397# provided by doxygen. Whatever the program writes to standard output 398# is used as the file version. See the manual for examples. 399 400FILE_VERSION_FILTER = 401 402#--------------------------------------------------------------------------- 403# configuration options related to warning and progress messages 404#--------------------------------------------------------------------------- 405 406# The QUIET tag can be used to turn on/off the messages that are generated 407# by doxygen. Possible values are YES and NO. If left blank NO is used. 408 409QUIET = NO 410 411# The WARNINGS tag can be used to turn on/off the warning messages that are 412# generated by doxygen. Possible values are YES and NO. If left blank 413# NO is used. 414 415WARNINGS = YES 416 417# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 418# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 419# automatically be disabled. 420 421WARN_IF_UNDOCUMENTED = YES 422 423# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 424# potential errors in the documentation, such as not documenting some 425# parameters in a documented function, or documenting parameters that 426# don't exist or using markup commands wrongly. 427 428WARN_IF_DOC_ERROR = YES 429 430# This WARN_NO_PARAMDOC option can be abled to get warnings for 431# functions that are documented, but have no documentation for their parameters 432# or return value. If set to NO (the default) doxygen will only warn about 433# wrong or incomplete parameter documentation, but not about the absence of 434# documentation. 435 436WARN_NO_PARAMDOC = NO 437 438# The WARN_FORMAT tag determines the format of the warning messages that 439# doxygen can produce. The string should contain the $file, $line, and $text 440# tags, which will be replaced by the file and line number from which the 441# warning originated and the warning text. Optionally the format may contain 442# $version, which will be replaced by the version of the file (if it could 443# be obtained via FILE_VERSION_FILTER) 444 445WARN_FORMAT = "$file:$line: $text" 446 447# The WARN_LOGFILE tag can be used to specify a file to which warning 448# and error messages should be written. If left blank the output is written 449# to stderr. 450 451WARN_LOGFILE = 452 453#--------------------------------------------------------------------------- 454# configuration options related to the input files 455#--------------------------------------------------------------------------- 456 457# The INPUT tag can be used to specify the files and/or directories that contain 458# documented source files. You may enter file names like "myfile.cpp" or 459# directories like "/usr/src/myproject". Separate the files or directories 460# with spaces. 461 462INPUT = src/ src/wms src/wfs src/fe src/sld src/struct src/ows 463 464# If the value of the INPUT tag contains directories, you can use the 465# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 466# and *.h) to filter out the source-files in the directories. If left 467# blank the following patterns are tested: 468# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 469# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py 470 471FILE_PATTERNS = *.c \ 472 *.h 473 474# The RECURSIVE tag can be used to turn specify whether or not subdirectories 475# should be searched for input files as well. Possible values are YES and NO. 476# If left blank NO is used. 477 478RECURSIVE = NO 479 480# The EXCLUDE tag can be used to specify files and/or directories that should 481# excluded from the INPUT source files. This way you can easily exclude a 482# subdirectory from a directory tree whose root is specified with the INPUT tag. 483 484EXCLUDE = 485 486# The EXCLUDE_SYMLINKS tag can be used select whether or not files or 487# directories that are symbolic links (a Unix filesystem feature) are excluded 488# from the input. 489 490EXCLUDE_SYMLINKS = NO 491 492# If the value of the INPUT tag contains directories, you can use the 493# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 494# certain files from those directories. Note that the wildcards are matched 495# against the file with absolute path, so to exclude all test directories 496# for example use the pattern */test/* 497 498EXCLUDE_PATTERNS = 499 500# The EXAMPLE_PATH tag can be used to specify one or more files or 501# directories that contain example code fragments that are included (see 502# the \include command). 503 504EXAMPLE_PATH = 505 506# If the value of the EXAMPLE_PATH tag contains directories, you can use the 507# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 508# and *.h) to filter out the source-files in the directories. If left 509# blank all files are included. 510 511EXAMPLE_PATTERNS = 512 513# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 514# searched for input files to be used with the \include or \dontinclude 515# commands irrespective of the value of the RECURSIVE tag. 516# Possible values are YES and NO. If left blank NO is used. 517 518EXAMPLE_RECURSIVE = NO 519 520# The IMAGE_PATH tag can be used to specify one or more files or 521# directories that contain image that are included in the documentation (see 522# the \image command). 523 524IMAGE_PATH = 525 526# The INPUT_FILTER tag can be used to specify a program that doxygen should 527# invoke to filter for each input file. Doxygen will invoke the filter program 528# by executing (via popen()) the command <filter> <input-file>, where <filter> 529# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 530# input file. Doxygen will then use the output that the filter program writes 531# to standard output. If FILTER_PATTERNS is specified, this tag will be 532# ignored. 533 534INPUT_FILTER = 535 536# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 537# basis. Doxygen will compare the file name with each pattern and apply the 538# filter if there is a match. The filters are a list of the form: 539# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 540# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 541# is applied to all files. 542 543FILTER_PATTERNS = 544 545# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 546# INPUT_FILTER) will be used to filter the input files when producing source 547# files to browse (i.e. when SOURCE_BROWSER is set to YES). 548 549FILTER_SOURCE_FILES = NO 550 551#--------------------------------------------------------------------------- 552# configuration options related to source browsing 553#--------------------------------------------------------------------------- 554 555# If the SOURCE_BROWSER tag is set to YES then a list of source files will 556# be generated. Documented entities will be cross-referenced with these sources. 557# Note: To get rid of all source code in the generated output, make sure also 558# VERBATIM_HEADERS is set to NO. 559 560SOURCE_BROWSER = YES 561 562# Setting the INLINE_SOURCES tag to YES will include the body 563# of functions and classes directly in the documentation. 564 565INLINE_SOURCES = NO 566 567# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 568# doxygen to hide any special comment blocks from generated source code 569# fragments. Normal C and C++ comments will always remain visible. 570 571STRIP_CODE_COMMENTS = YES 572 573# If the REFERENCED_BY_RELATION tag is set to YES (the default) 574# then for each documented function all documented 575# functions referencing it will be listed. 576 577REFERENCED_BY_RELATION = YES 578 579# If the REFERENCES_RELATION tag is set to YES (the default) 580# then for each documented function all documented entities 581# called/used by that function will be listed. 582 583REFERENCES_RELATION = YES 584 585# If the USE_HTAGS tag is set to YES then the references to source code 586# will point to the HTML generated by the htags(1) tool instead of doxygen 587# built-in source browser. The htags tool is part of GNU's global source 588# tagging system (see http://www.gnu.org/software/global/global.html). You 589# will need version 4.8.6 or higher. 590 591USE_HTAGS = NO 592 593# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 594# will generate a verbatim copy of the header file for each class for 595# which an include is specified. Set to NO to disable this. 596 597VERBATIM_HEADERS = YES 598 599#--------------------------------------------------------------------------- 600# configuration options related to the alphabetical class index 601#--------------------------------------------------------------------------- 602 603# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 604# of all compounds will be generated. Enable this if the project 605# contains a lot of classes, structs, unions or interfaces. 606 607ALPHABETICAL_INDEX = NO 608 609# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 610# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 611# in which this list will be split (can be a number in the range [1..20]) 612 613COLS_IN_ALPHA_INDEX = 5 614 615# In case all classes in a project start with a common prefix, all 616# classes will be put under the same header in the alphabetical index. 617# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 618# should be ignored while generating the index headers. 619 620IGNORE_PREFIX = 621 622#--------------------------------------------------------------------------- 623# configuration options related to the HTML output 624#--------------------------------------------------------------------------- 625 626# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 627# generate HTML output. 628 629GENERATE_HTML = YES 630 631# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 632# If a relative path is entered the value of OUTPUT_DIRECTORY will be 633# put in front of it. If left blank `html' will be used as the default path. 634 635HTML_OUTPUT = doxygen 636 637# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 638# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 639# doxygen will generate files with .html extension. 640 641HTML_FILE_EXTENSION = .html 642 643# The HTML_HEADER tag can be used to specify a personal HTML header for 644# each generated HTML page. If it is left blank doxygen will generate a 645# standard header. 646 647HTML_HEADER = 648 649# The HTML_FOOTER tag can be used to specify a personal HTML footer for 650# each generated HTML page. If it is left blank doxygen will generate a 651# standard footer. 652 653HTML_FOOTER = 654 655# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 656# style sheet that is used by each HTML page. It can be used to 657# fine-tune the look of the HTML output. If the tag is left blank doxygen 658# will generate a default style sheet. Note that doxygen will try to copy 659# the style sheet file to the HTML output directory, so don't put your own 660# stylesheet in the HTML output directory as well, or it will be erased! 661 662HTML_STYLESHEET = 663 664# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 665# files or namespaces will be aligned in HTML using tables. If set to 666# NO a bullet list will be used. 667 668HTML_ALIGN_MEMBERS = YES 669 670# If the GENERATE_HTMLHELP tag is set to YES, additional index files 671# will be generated that can be used as input for tools like the 672# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 673# of the generated HTML documentation. 674 675GENERATE_HTMLHELP = NO 676 677# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 678# be used to specify the file name of the resulting .chm file. You 679# can add a path in front of the file if the result should not be 680# written to the html output directory. 681 682CHM_FILE = 683 684# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 685# be used to specify the location (absolute path including file name) of 686# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 687# the HTML help compiler on the generated index.hhp. 688 689HHC_LOCATION = 690 691# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 692# controls if a separate .chi index file is generated (YES) or that 693# it should be included in the master .chm file (NO). 694 695GENERATE_CHI = NO 696 697# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 698# controls whether a binary table of contents is generated (YES) or a 699# normal table of contents (NO) in the .chm file. 700 701BINARY_TOC = NO 702 703# The TOC_EXPAND flag can be set to YES to add extra items for group members 704# to the contents of the HTML help documentation and to the tree view. 705 706TOC_EXPAND = NO 707 708# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 709# top of each HTML page. The value NO (the default) enables the index and 710# the value YES disables it. 711 712DISABLE_INDEX = NO 713 714# This tag can be used to set the number of enum values (range [1..20]) 715# that doxygen will group on one line in the generated HTML documentation. 716 717ENUM_VALUES_PER_LINE = 1 718 719# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be 720# generated containing a tree-like index structure (just like the one that 721# is generated for HTML Help). For this to work a browser that supports 722# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 723# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 724# probably better off using the HTML help feature. 725 726GENERATE_TREEVIEW = YES 727 728# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 729# used to set the initial width (in pixels) of the frame in which the tree 730# is shown. 731 732TREEVIEW_WIDTH = 250 733 734#--------------------------------------------------------------------------- 735# configuration options related to the LaTeX output 736#--------------------------------------------------------------------------- 737 738# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 739# generate Latex output. 740 741GENERATE_LATEX = NO 742 743# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 744# If a relative path is entered the value of OUTPUT_DIRECTORY will be 745# put in front of it. If left blank `latex' will be used as the default path. 746 747LATEX_OUTPUT = latex 748 749# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 750# invoked. If left blank `latex' will be used as the default command name. 751 752LATEX_CMD_NAME = latex 753 754# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 755# generate index for LaTeX. If left blank `makeindex' will be used as the 756# default command name. 757 758MAKEINDEX_CMD_NAME = makeindex 759 760# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 761# LaTeX documents. This may be useful for small projects and may help to 762# save some trees in general. 763 764COMPACT_LATEX = NO 765 766# The PAPER_TYPE tag can be used to set the paper type that is used 767# by the printer. Possible values are: a4, a4wide, letter, legal and 768# executive. If left blank a4wide will be used. 769 770PAPER_TYPE = a4wide 771 772# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 773# packages that should be included in the LaTeX output. 774 775EXTRA_PACKAGES = 776 777# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 778# the generated latex document. The header should contain everything until 779# the first chapter. If it is left blank doxygen will generate a 780# standard header. Notice: only use this tag if you know what you are doing! 781 782LATEX_HEADER = 783 784# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 785# is prepared for conversion to pdf (using ps2pdf). The pdf file will 786# contain links (just like the HTML output) instead of page references 787# This makes the output suitable for online browsing using a pdf viewer. 788 789PDF_HYPERLINKS = NO 790 791# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 792# plain latex in the generated Makefile. Set this option to YES to get a 793# higher quality PDF documentation. 794 795USE_PDFLATEX = NO 796 797# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 798# command to the generated LaTeX files. This will instruct LaTeX to keep 799# running if errors occur, instead of asking the user for help. 800# This option is also used when generating formulas in HTML. 801 802LATEX_BATCHMODE = NO 803 804# If LATEX_HIDE_INDICES is set to YES then doxygen will not 805# include the index chapters (such as File Index, Compound Index, etc.) 806# in the output. 807 808LATEX_HIDE_INDICES = NO 809 810#--------------------------------------------------------------------------- 811# configuration options related to the RTF output 812#--------------------------------------------------------------------------- 813 814# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 815# The RTF output is optimized for Word 97 and may not look very pretty with 816# other RTF readers or editors. 817 818GENERATE_RTF = NO 819 820# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 821# If a relative path is entered the value of OUTPUT_DIRECTORY will be 822# put in front of it. If left blank `rtf' will be used as the default path. 823 824RTF_OUTPUT = rtf 825 826# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 827# RTF documents. This may be useful for small projects and may help to 828# save some trees in general. 829 830COMPACT_RTF = NO 831 832# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 833# will contain hyperlink fields. The RTF file will 834# contain links (just like the HTML output) instead of page references. 835# This makes the output suitable for online browsing using WORD or other 836# programs which support those fields. 837# Note: wordpad (write) and others do not support links. 838 839RTF_HYPERLINKS = NO 840 841# Load stylesheet definitions from file. Syntax is similar to doxygen's 842# config file, i.e. a series of assignments. You only have to provide 843# replacements, missing definitions are set to their default value. 844 845RTF_STYLESHEET_FILE = 846 847# Set optional variables used in the generation of an rtf document. 848# Syntax is similar to doxygen's config file. 849 850RTF_EXTENSIONS_FILE = 851 852#--------------------------------------------------------------------------- 853# configuration options related to the man page output 854#--------------------------------------------------------------------------- 855 856# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 857# generate man pages 858 859GENERATE_MAN = NO 860 861# The MAN_OUTPUT tag is used to specify where the man pages will be put. 862# If a relative path is entered the value of OUTPUT_DIRECTORY will be 863# put in front of it. If left blank `man' will be used as the default path. 864 865MAN_OUTPUT = man 866 867# The MAN_EXTENSION tag determines the extension that is added to 868# the generated man pages (default is the subroutine's section .3) 869 870MAN_EXTENSION = .3 871 872# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 873# then it will generate one additional man file for each entity 874# documented in the real man page(s). These additional files 875# only source the real man page, but without them the man command 876# would be unable to find the correct page. The default is NO. 877 878MAN_LINKS = NO 879 880#--------------------------------------------------------------------------- 881# configuration options related to the XML output 882#--------------------------------------------------------------------------- 883 884# If the GENERATE_XML tag is set to YES Doxygen will 885# generate an XML file that captures the structure of 886# the code including all documentation. 887 888GENERATE_XML = NO 889 890# The XML_OUTPUT tag is used to specify where the XML pages will be put. 891# If a relative path is entered the value of OUTPUT_DIRECTORY will be 892# put in front of it. If left blank `xml' will be used as the default path. 893 894XML_OUTPUT = xml 895 896# The XML_SCHEMA tag can be used to specify an XML schema, 897# which can be used by a validating XML parser to check the 898# syntax of the XML files. 899 900XML_SCHEMA = 901 902# The XML_DTD tag can be used to specify an XML DTD, 903# which can be used by a validating XML parser to check the 904# syntax of the XML files. 905 906XML_DTD = 907 908# If the XML_PROGRAMLISTING tag is set to YES Doxygen will 909# dump the program listings (including syntax highlighting 910# and cross-referencing information) to the XML output. Note that 911# enabling this will significantly increase the size of the XML output. 912 913XML_PROGRAMLISTING = YES 914 915#--------------------------------------------------------------------------- 916# configuration options for the AutoGen Definitions output 917#--------------------------------------------------------------------------- 918 919# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 920# generate an AutoGen Definitions (see autogen.sf.net) file 921# that captures the structure of the code including all 922# documentation. Note that this feature is still experimental 923# and incomplete at the moment. 924 925GENERATE_AUTOGEN_DEF = NO 926 927#--------------------------------------------------------------------------- 928# configuration options related to the Perl module output 929#--------------------------------------------------------------------------- 930 931# If the GENERATE_PERLMOD tag is set to YES Doxygen will 932# generate a Perl module file that captures the structure of 933# the code including all documentation. Note that this 934# feature is still experimental and incomplete at the 935# moment. 936 937GENERATE_PERLMOD = NO 938 939# If the PERLMOD_LATEX tag is set to YES Doxygen will generate 940# the necessary Makefile rules, Perl scripts and LaTeX code to be able 941# to generate PDF and DVI output from the Perl module output. 942 943PERLMOD_LATEX = NO 944 945# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 946# nicely formatted so it can be parsed by a human reader. This is useful 947# if you want to understand what is going on. On the other hand, if this 948# tag is set to NO the size of the Perl module output will be much smaller 949# and Perl will parse it just the same. 950 951PERLMOD_PRETTY = YES 952 953# The names of the make variables in the generated doxyrules.make file 954# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 955# This is useful so different doxyrules.make files included by the same 956# Makefile don't overwrite each other's variables. 957 958PERLMOD_MAKEVAR_PREFIX = 959 960#--------------------------------------------------------------------------- 961# Configuration options related to the preprocessor 962#--------------------------------------------------------------------------- 963 964# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 965# evaluate all C-preprocessor directives found in the sources and include 966# files. 967 968ENABLE_PREPROCESSING = YES 969 970# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 971# names in the source code. If set to NO (the default) only conditional 972# compilation will be performed. Macro expansion can be done in a controlled 973# way by setting EXPAND_ONLY_PREDEF to YES. 974 975MACRO_EXPANSION = NO 976 977# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 978# then the macro expansion is limited to the macros specified with the 979# PREDEFINED and EXPAND_AS_DEFINED tags. 980 981EXPAND_ONLY_PREDEF = NO 982 983# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 984# in the INCLUDE_PATH (see below) will be search if a #include is found. 985 986SEARCH_INCLUDES = YES 987 988# The INCLUDE_PATH tag can be used to specify one or more directories that 989# contain include files that are not input files but should be processed by 990# the preprocessor. 991 992INCLUDE_PATH = 993 994# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 995# patterns (like *.h and *.hpp) to filter out the header-files in the 996# directories. If left blank, the patterns specified with FILE_PATTERNS will 997# be used. 998 999INCLUDE_FILE_PATTERNS = 1000 1001# The PREDEFINED tag can be used to specify one or more macro names that 1002# are defined before the preprocessor is started (similar to the -D option of 1003# gcc). The argument of the tag is a list of macros of the form: name 1004# or name=definition (no spaces). If the definition and the = are 1005# omitted =1 is assumed. To prevent a macro definition from being 1006# undefined via #undef or recursively expanded use the := operator 1007# instead of the = operator. 1008 1009PREDEFINED = 1010 1011# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 1012# this tag can be used to specify a list of macro names that should be expanded. 1013# The macro definition that is found in the sources will be used. 1014# Use the PREDEFINED tag if you want to use a different macro definition. 1015 1016EXPAND_AS_DEFINED = 1017 1018# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 1019# doxygen's preprocessor will remove all function-like macros that are alone 1020# on a line, have an all uppercase name, and do not end with a semicolon. Such 1021# function macros are typically used for boiler-plate code, and will confuse 1022# the parser if not removed. 1023 1024SKIP_FUNCTION_MACROS = YES 1025 1026#--------------------------------------------------------------------------- 1027# Configuration::additions related to external references 1028#--------------------------------------------------------------------------- 1029 1030# The TAGFILES option can be used to specify one or more tagfiles. 1031# Optionally an initial location of the external documentation 1032# can be added for each tagfile. The format of a tag file without 1033# this location is as follows: 1034# TAGFILES = file1 file2 ... 1035# Adding location for the tag files is done as follows: 1036# TAGFILES = file1=loc1 "file2 = loc2" ... 1037# where "loc1" and "loc2" can be relative or absolute paths or 1038# URLs. If a location is present for each tag, the installdox tool 1039# does not have to be run to correct the links. 1040# Note that each tag file must have a unique name 1041# (where the name does NOT include the path) 1042# If a tag file is not located in the directory in which doxygen 1043# is run, you must also specify the path to the tagfile here. 1044 1045TAGFILES = 1046 1047# When a file name is specified after GENERATE_TAGFILE, doxygen will create 1048# a tag file that is based on the input files it reads. 1049 1050GENERATE_TAGFILE = 1051 1052# If the ALLEXTERNALS tag is set to YES all external classes will be listed 1053# in the class index. If set to NO only the inherited external classes 1054# will be listed. 1055 1056ALLEXTERNALS = NO 1057 1058# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 1059# in the modules index. If set to NO, only the current project's groups will 1060# be listed. 1061 1062EXTERNAL_GROUPS = YES 1063 1064# The PERL_PATH should be the absolute path and name of the perl script 1065# interpreter (i.e. the result of `which perl'). 1066 1067PERL_PATH = /usr/bin/perl 1068 1069#--------------------------------------------------------------------------- 1070# Configuration options related to the dot tool 1071#--------------------------------------------------------------------------- 1072 1073# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 1074# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 1075# or super classes. Setting the tag to NO turns the diagrams off. Note that 1076# this option is superseded by the HAVE_DOT option below. This is only a 1077# fallback. It is recommended to install and use dot, since it yields more 1078# powerful graphs. 1079 1080CLASS_DIAGRAMS = YES 1081 1082# If set to YES, the inheritance and collaboration graphs will hide 1083# inheritance and usage relations if the target is undocumented 1084# or is not a class. 1085 1086HIDE_UNDOC_RELATIONS = YES 1087 1088# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 1089# available from the path. This tool is part of Graphviz, a graph visualization 1090# toolkit from AT&T and Lucent Bell Labs. The other options in this section 1091# have no effect if this option is set to NO (the default) 1092 1093HAVE_DOT = YES 1094 1095# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 1096# will generate a graph for each documented class showing the direct and 1097# indirect inheritance relations. Setting this tag to YES will force the 1098# the CLASS_DIAGRAMS tag to NO. 1099 1100CLASS_GRAPH = YES 1101 1102# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 1103# will generate a graph for each documented class showing the direct and 1104# indirect implementation dependencies (inheritance, containment, and 1105# class references variables) of the class with other documented classes. 1106 1107COLLABORATION_GRAPH = YES 1108 1109# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 1110# will generate a graph for groups, showing the direct groups dependencies 1111 1112GROUP_GRAPHS = YES 1113 1114# If the UML_LOOK tag is set to YES doxygen will generate inheritance and 1115# collaboration diagrams in a style similar to the OMG's Unified Modeling 1116# Language. 1117 1118UML_LOOK = NO 1119 1120# If set to YES, the inheritance and collaboration graphs will show the 1121# relations between templates and their instances. 1122 1123TEMPLATE_RELATIONS = NO 1124 1125# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 1126# tags are set to YES then doxygen will generate a graph for each documented 1127# file showing the direct and indirect include dependencies of the file with 1128# other documented files. 1129 1130INCLUDE_GRAPH = YES 1131 1132# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 1133# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 1134# documented header file showing the documented files that directly or 1135# indirectly include this file. 1136 1137INCLUDED_BY_GRAPH = YES 1138 1139# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 1140# generate a call dependency graph for every global function or class method. 1141# Note that enabling this option will significantly increase the time of a run. 1142# So in most cases it will be better to enable call graphs for selected 1143# functions only using the \callgraph command. 1144 1145CALL_GRAPH = YES 1146 1147# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 1148# will graphical hierarchy of all classes instead of a textual one. 1149 1150GRAPHICAL_HIERARCHY = YES 1151 1152# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 1153# then doxygen will show the dependencies a directory has on other directories 1154# in a graphical way. The dependency relations are determined by the #include 1155# relations between the files in the directories. 1156 1157DIRECTORY_GRAPH = YES 1158 1159# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 1160# generated by dot. Possible values are png, jpg, or gif 1161# If left blank png will be used. 1162 1163DOT_IMAGE_FORMAT = png 1164 1165# The tag DOT_PATH can be used to specify the path where the dot tool can be 1166# found. If left blank, it is assumed the dot tool can be found in the path. 1167 1168DOT_PATH = 1169 1170# The DOTFILE_DIRS tag can be used to specify one or more directories that 1171# contain dot files that are included in the documentation (see the 1172# \dotfile command). 1173 1174DOTFILE_DIRS = 1175 1176# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 1177# (in pixels) of the graphs generated by dot. If a graph becomes larger than 1178# this value, doxygen will try to truncate the graph, so that it fits within 1179# the specified constraint. Beware that most browsers cannot cope with very 1180# large images. 1181 1182MAX_DOT_GRAPH_WIDTH = 1024 1183 1184# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 1185# (in pixels) of the graphs generated by dot. If a graph becomes larger than 1186# this value, doxygen will try to truncate the graph, so that it fits within 1187# the specified constraint. Beware that most browsers cannot cope with very 1188# large images. 1189 1190MAX_DOT_GRAPH_HEIGHT = 1024 1191 1192# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 1193# graphs generated by dot. A depth value of 3 means that only nodes reachable 1194# from the root by following a path via at most 3 edges will be shown. Nodes 1195# that lay further from the root node will be omitted. Note that setting this 1196# option to 1 or 2 may greatly reduce the computation time needed for large 1197# code bases. Also note that a graph may be further truncated if the graph's 1198# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH 1199# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), 1200# the graph is not depth-constrained. 1201 1202MAX_DOT_GRAPH_DEPTH = 0 1203 1204# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 1205# background. This is disabled by default, which results in a white background. 1206# Warning: Depending on the platform used, enabling this option may lead to 1207# badly anti-aliased labels on the edges of a graph (i.e. they become hard to 1208# read). 1209 1210DOT_TRANSPARENT = NO 1211 1212# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 1213# files in one run (i.e. multiple -o and -T options on the command line). This 1214# makes dot run faster, but since only newer versions of dot (>1.8.10) 1215# support this, this feature is disabled by default. 1216 1217DOT_MULTI_TARGETS = NO 1218 1219# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 1220# generate a legend page explaining the meaning of the various boxes and 1221# arrows in the dot generated graphs. 1222 1223GENERATE_LEGEND = NO 1224 1225# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 1226# remove the intermediate dot files that are used to generate 1227# the various graphs. 1228 1229DOT_CLEANUP = YES 1230 1231#--------------------------------------------------------------------------- 1232# Configuration::additions related to the search engine 1233#--------------------------------------------------------------------------- 1234 1235# The SEARCHENGINE tag specifies whether or not a search engine should be 1236# used. If set to NO the values of all tags below this one will be ignored. 1237 1238SEARCHENGINE = NO 1239