xref: /dports/java/openjdk16/jdk16u-jdk-16.0.2-7-1/doc/hotspot-unit-tests.md

% Native/Unit Test Development Guidelines

The purpose of these guidelines is to establish a shared vision on
what kind of native tests and how we want to develop them for Hotspot
using GoogleTest. Hence these guidelines include style items as well
as test approach items.

First section of this document describes properties of good tests
which are common for almost all types of test regardless of language,
framework, etc. Further sections provide recommendations to achieve
those properties and other HotSpot and/or GoogleTest specific
guidelines.

## Good test properties

### Lightness

Use the most lightweight type of tests.

In Hotspot, there are 3 different types of tests regarding their
dependency on a JVM, each next level is slower than previous

* `TEST` : a test does not depend on a JVM

* `TEST_VM` : a test does depend on an initialized JVM, but are
supposed not to break a JVM, i.e. leave it in a workable state.

* `TEST_OTHER_VM` : a test depends on a JVM and requires a freshly
initialized JVM or leaves a JVM in non-workable state

### Isolation

Tests have to be isolated: not to have visible side-effects,
influences on other tests results.

Results of one test should not depend on test execution order, other
tests, otherwise it is becoming almost impossible to find out why a
test failed. Due to hotspot-specific, it is not so easy to get a full
isolation, e.g. we share an initialized JVM between all `TEST_VM` tests,
so if your test changes JVM's state too drastically and does not
change it back, you had better consider `TEST_OTHER_VM`.

### Atomicity and self-containment

Tests should be *atomic* and *self-contained* at the same time.

One test should check a particular part of a class, subsystem,
functionality, etc. Then it is quite easy to determine what parts of a
product are broken basing on test failures. On the other hand, a test
should test that part more-or-less entirely, because when one sees a
test `FooTest::bar`, they assume all aspects of bar from `Foo` are tested.

However, it is impossible to cover all aspects even of a method, not
to mention a subsystem. In such cases, it is recommended to have
several tests, one for each aspect of a thing under test. For example
one test to tests how `Foo::bar` works if an argument is `null`, another
test to test how it works if an argument is acceptable but `Foo` is not
in the right state to accept it and so on. This helps not only to make
tests atomic, self-contained but also makes test name self-descriptive
(discussed in more details in [Test names](#test-names)).

### Repeatability

Tests have to be repeatable.

Reproducibility is very crucial for a test. No one likes sporadic test
failures, they are hard to investigate, fix and verify a fix.

In some cases, it is quite hard to write a 100% repeatable test, since
besides a test there can be other moving parts, e.g. in case of
`TEST_VM` there are several concurrently running threads. Despite this,
we should try to make a test as reproducible as possible.

### Informativeness

In case of a failure, a test should be as *informative* as possible.

Having more information about a test failure than just compared values
can be very useful for failure troubleshooting, it can reduce or even
completely eliminate debugging hours. This is even more important in
case of not 100% reproducible failures.

Achieving this property, one can easily make a test too verbose, so it
will be really hard to find useful information in the ocean of useless
information. Hence they should not only think about how to provide
[good information](#error-messages), but also
[when to do it](#uncluttered-output).

### Testing instead of visiting

Tests should *test*.

It is not enough just to "visit" some code, a test should check that
code does that it has to do, compare return values with expected
values, check that desired side effects are done, and undesired are
not, and so on. In other words, a test should contain at least one
GoogleTest assertion and do not rely on JVM asserts.

Generally speaking to write a good test, one should create a model of
the system under tests, a model of possible bugs (or bugs which one
wants to find) and design tests using those models.

### Nearness

Prefer having checks inside test code.

Not only does having test logic outside, e.g. verification method,
depending on asserts in product code contradict with several items
above but also decreases test’s readability and stability. It is much
easier to understand that a test is testing when all testing logic is
located inside a test or nearby in shared test libraries. As a rule of
thumb, the closer a check to a test, the better.

## Asserts

### Several checks

Prefer `EXPECT` over `ASSERT` if possible.

This is related to the [informativeness](#informativeness) property of
tests, information for other checks can help to better localize a
defect’s root-cause. One should use `ASSERT` if it is impossible to
continue test execution or if it does not make much sense. Later in
the text, `EXPECT` forms will be used to refer to both
`ASSERT/EXPECT`.

When it is possible to make several different checks, but impossible
to continue test execution if at least one check fails, you can
use `::testing::Test::HasNonfatalFailure()` function. The recommended
way to express that is
`ASSERT_FALSE(::testing::Test::HasNonfatalFailure())`. Besides making it
clear why a test is aborted, it also allows you to provide more
information about a failure.

### First parameter is expected value

In all equality assertions, expected values should be passed as the
first parameter.

This convention is adopted by GoogleTest, and there is a slight
difference in how GoogleTest treats parameters, the most important one
is `null` detection. Due to different reasons, `null` detection is enabled
only for the first parameter, that is to said `EXPECT_EQ(NULL, object)`
checks that object is `null`, while `EXPECT_EQ(object, NULL)` checks that
object equals to `NULL`, GoogleTest is very strict regarding types of
compared values so the latter will generates a compile-time error.

### Floating-point comparison

Use floating-point special macros to compare `float/double` values.

Because of floating-point number representations and round-off errors,
regular equality comparison will not return true in most cases. There
are special `EXPECT_FLOAT_EQ/EXPECT_DOUBLE_EQ` assertions which check
that the distance between compared values is not more than 4 ULPs,
there is also `EXPECT_NEAR(v1, v2, eps)` which checks that the absolute
value of the difference between `v1` and `v2` is not greater than `eps`.

### C string comparison

Use string special macros for C strings comparisons.

`EXPECT_EQ` just compares pointers’ values, which is hardly what one
wants comparing C strings. GoogleTest provides `EXPECT_STREQ` and
`EXPECT_STRNE` macros to compare C string contents. There are also
case-insensitive versions `EXPECT_STRCASEEQ`, `EXPECT_STRCASENE`.

### Error messages

Provide informative, but not too verbose error messages.

All GoogleTest asserts print compared expressions and their values, so
there is no need to have them in error messages. Asserts print only
compared values, they do not print any of interim variables, e.g.
`ASSERT_TRUE((val1 == val2 && isFail(foo(8)) || i == 18)` prints only
one value. If you use some complex predicates, please consider
`EXPECT_PRED*` or `EXPECT_FORMAT_PRED` assertions family, they check that
a predicate returns true/success and print out all parameters values.

However in some cases, default information is not enough, a commonly
used example is an assert inside a loop, GoogleTest will not print
iteration values (unless it is an assert's parameter). Other
demonstrative examples are printing error code and a corresponding
error message; printing internal states which might have an impact on
results. One should add this information to assert message using `<<`
operator.

### Uncluttered output

Print information only if it is needed.

Too verbose tests which print all information even if they pass are
very bad practice. They just pollute output, so it becomes harder to
find useful information. In order not print information till it is
really needed, one should consider saving it to a temporary buffer and
pass to an assert.
<https://hg.openjdk.java.net/jdk/jdk/file/tip/test/hotspot/gtest/gc/shared/test_memset_with_concurrent_readers.cpp>
has a good example how to do that.

### Failures propagation

Wrap a subroutine call into `EXPECT_NO_FATAL_FAILURE` macro to
propagate failures.

`ASSERT` and `FAIL` abort only the current function, so if you have them
in a subroutine, a test will not be aborted after the subroutine even
if `ASSERT` or `FAIL` fails. You should call such subroutines in
`ASSERT_NO_FATAL_FAILURE` macro to propagate fatal failures and abort a
test. `(EXPECT|ASSERT)_NO_FATAL_FAILURE` can also be used to provide
more information.

Due to obvious reasons, there are no
`(EXPECT|ASSERT)_NO_NONFATAL_FAILURE` macros. However, if you need to
check if a subroutine generated a nonfatal failure (failed an `EXPECT`),
you can use `::testing::Test::HasNonfatalFailure` function,
or `::testing::Test::HasFailure` function to check if a subroutine
generated any failures, see [Several checks](#several-checks).

## Naming and Grouping

### Test group names

Test group names should be in CamelCase, start and end with a letter.
A test group should be named after tested class, functionality,
subsystem, etc.

This naming scheme helps to find tests, filter them and simplifies
test failure analysis. For example, class `Foo` - test group `Foo`,
compiler logging subsystem - test group `CompilerLogging`, G1 GC — test
group `G1GC`, and so forth.

### Filename

A test file must have `test_` prefix and `.cpp` suffix.

Both are actually requirements from the current build system to
recognize your tests.

### File location

Test file location should reflect a location of the tested part of the product.

* All unit tests for a class from `foo/bar/baz.cpp` should be placed
`foo/bar/test_baz.cpp` in `hotspot/test/native/` directory. Having all
tests for a class in one file is a common practice for unit tests, it
helps to see all existing tests at once, share functions and/or
resources without losing encapsulation.

* For tests which test more than one class, directory hierarchy should
be the same as product hierarchy, and file name should reflect the
name of the tested subsystem/functionality. For example, if a
sub-system under tests belongs to `gc/g1`, tests should be placed in
`gc/g1` directory.

Please note that framework prepends directory name to a test group
name. For example, if `TEST(foo, check_this)` and `TEST(bar, check_that)`
are defined in `hotspot/test/native/gc/shared/test_foo.cpp` file, they
will be reported as `gc/shared/foo::check_this` and
`gc/shared/bar::check_that`.

### Test names

Test names should be in small_snake_case, start and end with a letter.
A test name should reflect that a test checks.

Such naming makes tests self-descriptive and helps a lot during the
whole test life cycle. It is easy to do test planning, test inventory,
to see what things are not tested, to review tests, to analyze test
failures, to evolve a test, etc. For example
`foo_return_0_if_name_is_null` is better than `foo_sanity` or `foo_basic` or
just `foo`, `humongous_objects_can_not_be_moved_by_young_gc` is better
than `ho_young_gc`.

Actually using underscore is against GoogleTest project convention,
because it can lead to illegal identifiers, however, this is too
strict. Restricting usage of underscore for test names only and
prohibiting test name starts or ends with an underscore are enough to
be safe.

### Fixture classes

Fixture classes should be named after tested classes, subsystems, etc
(follow [Test group names rule](#test-group-names)) and have
`Test` suffix to prevent class name conflicts.

### Friend classes

All test purpose friends should have either `Test` or `Testable` suffix.

It greatly simplifies understanding of friendship’s purpose and allows
statically check that private members are not exposed unexpectedly.
Having `FooTest` as a friend of `Foo` without any comments will be
understood as a necessary evil to get testability.

### OS/CPU specific tests

Guard OS/CPU specific tests by `#ifdef` and have OS/CPU name in filename.

For the time being, we do not support separate directories for OS,
CPU, OS-CPU specific tests, in case we will have lots of such tests,
we will change directory layout and build system to support that in
the same way it is done in hotspot.

## Miscellaneous

### Hotspot style

Abide the norms and rules accepted in Hotspot style guide.

Tests are a part of Hotspot, so everything (if applicable) we use for
Hotspot, should be used for tests as well. Those guidelines cover
test-specific things.

### Code/test metrics

Coverage information and other code/test metrics are quite useful to
decide what tests should be written, what tests should be improved and
what can be removed.

For unit tests, widely used and well-known coverage metric is branch
coverage, which provides good quality of tests with relatively easy
test development process. For other levels of testing, branch coverage
is not as good, and one should consider others metrics, e.g.
transaction flow coverage, data flow coverage.

### Access to non-public members

Use explicit friend class to get access to non-public members.

We do not use GoogleTest macro to declare friendship relation,
because, from our point of view, it is less clear than an explicit
declaration.

Declaring a test fixture class as a friend class of a tested test is
the easiest and the clearest way to get access. However, it has some
disadvantages, here is some of them:

* Each test has to be declared as a friend
* Subclasses do not inheritance friendship relation

In other words, it is harder to share code between tests. Hence if you
want to share code or expect it to be useful in other tests, you
should consider making members in a tested class protected and
introduce a shared test-only class which expose those members via
public functions, or even making members publicly accessible right
away in a product class. If it is not an option to change members
visibility, one can create a friend class which exposes members.

### Death tests

You can not use death tests inside `TEST_OTHER_VM` and `TEST_VM_ASSERT*`.

We tried to make Hotspot-GoogleTest integration as transparent as
possible, however, due to the current implementation of `TEST_OTHER_VM`
and `TEST_VM_ASSERT*` tests, you cannot use death test functionality in
them. These tests are implemented as GoogleTest death tests, and
GoogleTest does not allow to have a death test inside another death
test.

### External flags

Passing external flags to a tested JVM is not supported.

The rationality of such design decision is to simplify both tests and
a test framework and to avoid failures related to incompatible flags
combination till there is a good solution for that. However there are
cases when one wants to test a JVM with specific flags combination,
`_JAVA_OPTIONS` environment variable can be used to do that. Flags from
`_JAVA_OPTIONS` will be used in `TEST_VM`, `TEST_OTHER_VM` and
`TEST_VM_ASSERT*` tests.

### Test-specific flags

Passing flags to a tested JVM in `TEST_OTHER_VM` and `TEST_VM_ASSERT*`
should be possible, but is not implemented yet.

Facility to pass test-specific flags is needed for system, regression
or other types of tests which require a fully initialized JVM in some
particular configuration, e.g. with Serial GC selected. There is no
support for such tests now, however, there is a plan to add that in
upcoming releases.

For now, if a test depends on flags values, it should have `if
(!<flag>) { return }` guards in the very beginning and `@requires`
comment similar to jtreg `@requires` directive right before test macros.
<https://hg.openjdk.java.net/jdk/jdk/file/tip/test/hotspot/gtest/gc/g1/test_g1IHOPControl.cpp>
ha an example of this temporary workaround.  It is important to follow
that pattern as it allows us to easily find all such tests and update
them as soon as there is an implementation of flag passing facility.

In long-term, we expect jtreg to support GoogleTest tests as first
class citizens, that is to say, jtreg will parse @requires comments
and filter out inapplicable tests.

### Flag restoring

Restore changed flags.

It is quite common for tests to configure JVM in a certain way
changing flags’ values. GoogleTest provides two ways to set up
environment before a test and restore it afterward: using either
constructor and destructor or `SetUp` and `TearDown` functions. Both ways
require to use a test fixture class, which sometimes is too wordy. The
simpler facilities like `FLAG_GUARD` macro or `*FlagSetting` classes could
be used in such cases to restore/set values.

Caveats:

* Changing a flag’s value could break the invariants between flags' values and hence could lead to unexpected/unsupported JVM state.

* `FLAG_SET_*` macros can change more than one flag (in order to
maintain invariants) so it is hard to predict what flags will be
changed and it makes restoring all changed flags a nontrivial task.
Thus in case one uses `FLAG_SET_*` macros, they should use `TEST_OTHER_VM`
test type.

### GoogleTest documentation

In case you have any questions regarding GoogleTest itself, its
asserts, test declaration macros, other macros, etc, please consult
its documentation.

## TODO

Although this document provides guidelines on the most important parts
of test development using GTest, it still misses a few items:

* Examples, esp for [access to non-public members](#access-to-non-public-members)

* test types: purpose, drawbacks, limitation
    * `TEST_VM`
    * `TEST_VM_F`
    * `TEST_OTHER_VM`
    * `TEST_VM_ASSERT`
    * `TEST_VM_ASSERT_MSG`

* Miscellaneous
    * Test libraries
        * where to place
        * how to write
        * how to use
    * test your tests
        * how to run tests in random order
        * how to run only specific tests
        * how to run each test separately
        * check that a test can find bugs it is supposed to by introducing them
    * mocks/stubs/dependency injection
    * setUp/tearDown
        * vs c-tor/d-tor
        * empty test to test them
    * internal (declared in .cpp) struct/classes