1 /*
2 * reserved comment block
3 * DO NOT REMOVE OR ALTER!
4 */
5 /*
6 * jdphuff.c
7 *
8 * Copyright (C) 1995-1997, Thomas G. Lane.
9 * This file is part of the Independent JPEG Group's software.
10 * For conditions of distribution and use, see the accompanying README file.
11 *
12 * This file contains Huffman entropy decoding routines for progressive JPEG.
13 *
14 * Much of the complexity here has to do with supporting input suspension.
15 * If the data source module demands suspension, we want to be able to back
16 * up to the start of the current MCU. To do this, we copy state variables
17 * into local working storage, and update them back to the permanent
18 * storage only upon successful completion of an MCU.
19 */
20
21 #define JPEG_INTERNALS
22 #include "jinclude.h"
23 #include "jpeglib.h"
24 #include "jdhuff.h" /* Declarations shared with jdhuff.c */
25
26
27 #ifdef D_PROGRESSIVE_SUPPORTED
28
29 /*
30 * Expanded entropy decoder object for progressive Huffman decoding.
31 *
32 * The savable_state subrecord contains fields that change within an MCU,
33 * but must not be updated permanently until we complete the MCU.
34 */
35
36 typedef struct {
37 unsigned int EOBRUN; /* remaining EOBs in EOBRUN */
38 int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
39 } savable_state;
40
41 /* This macro is to work around compilers with missing or broken
42 * structure assignment. You'll need to fix this code if you have
43 * such a compiler and you change MAX_COMPS_IN_SCAN.
44 */
45
46 #ifndef NO_STRUCT_ASSIGN
47 #define ASSIGN_STATE(dest,src) ((dest) = (src))
48 #else
49 #if MAX_COMPS_IN_SCAN == 4
50 #define ASSIGN_STATE(dest,src) \
51 ((dest).EOBRUN = (src).EOBRUN, \
52 (dest).last_dc_val[0] = (src).last_dc_val[0], \
53 (dest).last_dc_val[1] = (src).last_dc_val[1], \
54 (dest).last_dc_val[2] = (src).last_dc_val[2], \
55 (dest).last_dc_val[3] = (src).last_dc_val[3])
56 #endif
57 #endif
58
59
60 typedef struct {
61 struct jpeg_entropy_decoder pub; /* public fields */
62
63 /* These fields are loaded into local variables at start of each MCU.
64 * In case of suspension, we exit WITHOUT updating them.
65 */
66 bitread_perm_state bitstate; /* Bit buffer at start of MCU */
67 savable_state saved; /* Other state at start of MCU */
68
69 /* These fields are NOT loaded into local working state. */
70 unsigned int restarts_to_go; /* MCUs left in this restart interval */
71
72 /* Pointers to derived tables (these workspaces have image lifespan) */
73 d_derived_tbl * derived_tbls[NUM_HUFF_TBLS];
74
75 d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */
76 } phuff_entropy_decoder;
77
78 typedef phuff_entropy_decoder * phuff_entropy_ptr;
79
80 /* Forward declarations */
81 METHODDEF(boolean) decode_mcu_DC_first JPP((j_decompress_ptr cinfo,
82 JBLOCKROW *MCU_data));
83 METHODDEF(boolean) decode_mcu_AC_first JPP((j_decompress_ptr cinfo,
84 JBLOCKROW *MCU_data));
85 METHODDEF(boolean) decode_mcu_DC_refine JPP((j_decompress_ptr cinfo,
86 JBLOCKROW *MCU_data));
87 METHODDEF(boolean) decode_mcu_AC_refine JPP((j_decompress_ptr cinfo,
88 JBLOCKROW *MCU_data));
89
90
91 /*
92 * Initialize for a Huffman-compressed scan.
93 */
94
95 METHODDEF(void)
start_pass_phuff_decoder(j_decompress_ptr cinfo)96 start_pass_phuff_decoder (j_decompress_ptr cinfo)
97 {
98 phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
99 boolean is_DC_band, bad;
100 int ci, coefi, tbl;
101 int *coef_bit_ptr;
102 jpeg_component_info * compptr;
103
104 is_DC_band = (cinfo->Ss == 0);
105
106 /* Validate scan parameters */
107 bad = FALSE;
108 if (is_DC_band) {
109 if (cinfo->Se != 0)
110 bad = TRUE;
111 } else {
112 /* need not check Ss/Se < 0 since they came from unsigned bytes */
113 if (cinfo->Ss > cinfo->Se || cinfo->Se >= DCTSIZE2)
114 bad = TRUE;
115 /* AC scans may have only one component */
116 if (cinfo->comps_in_scan != 1)
117 bad = TRUE;
118 }
119 if (cinfo->Ah != 0) {
120 /* Successive approximation refinement scan: must have Al = Ah-1. */
121 if (cinfo->Al != cinfo->Ah-1)
122 bad = TRUE;
123 }
124 if (cinfo->Al > 13) /* need not check for < 0 */
125 bad = TRUE;
126 /* Arguably the maximum Al value should be less than 13 for 8-bit precision,
127 * but the spec doesn't say so, and we try to be liberal about what we
128 * accept. Note: large Al values could result in out-of-range DC
129 * coefficients during early scans, leading to bizarre displays due to
130 * overflows in the IDCT math. But we won't crash.
131 */
132 if (bad)
133 ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
134 cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
135 /* Update progression status, and verify that scan order is legal.
136 * Note that inter-scan inconsistencies are treated as warnings
137 * not fatal errors ... not clear if this is right way to behave.
138 */
139 for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
140 int cindex = cinfo->cur_comp_info[ci]->component_index;
141 coef_bit_ptr = & cinfo->coef_bits[cindex][0];
142 if (!is_DC_band && coef_bit_ptr[0] < 0) /* AC without prior DC scan */
143 WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0);
144 for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) {
145 int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi];
146 if (cinfo->Ah != expected)
147 WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi);
148 coef_bit_ptr[coefi] = cinfo->Al;
149 }
150 }
151
152 /* Select MCU decoding routine */
153 if (cinfo->Ah == 0) {
154 if (is_DC_band)
155 entropy->pub.decode_mcu = decode_mcu_DC_first;
156 else
157 entropy->pub.decode_mcu = decode_mcu_AC_first;
158 } else {
159 if (is_DC_band)
160 entropy->pub.decode_mcu = decode_mcu_DC_refine;
161 else
162 entropy->pub.decode_mcu = decode_mcu_AC_refine;
163 }
164
165 for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
166 compptr = cinfo->cur_comp_info[ci];
167 /* Make sure requested tables are present, and compute derived tables.
168 * We may build same derived table more than once, but it's not expensive.
169 */
170 if (is_DC_band) {
171 if (cinfo->Ah == 0) { /* DC refinement needs no table */
172 tbl = compptr->dc_tbl_no;
173 jpeg_make_d_derived_tbl(cinfo, TRUE, tbl,
174 & entropy->derived_tbls[tbl]);
175 }
176 } else {
177 tbl = compptr->ac_tbl_no;
178 jpeg_make_d_derived_tbl(cinfo, FALSE, tbl,
179 & entropy->derived_tbls[tbl]);
180 /* remember the single active table */
181 entropy->ac_derived_tbl = entropy->derived_tbls[tbl];
182 }
183 /* Initialize DC predictions to 0 */
184 entropy->saved.last_dc_val[ci] = 0;
185 }
186
187 /* Initialize bitread state variables */
188 entropy->bitstate.bits_left = 0;
189 entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
190 entropy->pub.insufficient_data = FALSE;
191
192 /* Initialize private state variables */
193 entropy->saved.EOBRUN = 0;
194
195 /* Initialize restart counter */
196 entropy->restarts_to_go = cinfo->restart_interval;
197 }
198
199
200 /*
201 * Figure F.12: extend sign bit.
202 * On some machines, a shift and add will be faster than a table lookup.
203 */
204
205 #ifdef AVOID_TABLES
206
207 #define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x))
208
209 #else
210
211 #define HUFF_EXTEND(x,s) ((x) < extend_test[s] ? (x) + extend_offset[s] : (x))
212
213 static const int extend_test[16] = /* entry n is 2**(n-1) */
214 { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
215 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 };
216
217 static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */
218 { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1,
219 ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1,
220 ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1,
221 ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 };
222
223 #endif /* AVOID_TABLES */
224
225
226 /*
227 * Check for a restart marker & resynchronize decoder.
228 * Returns FALSE if must suspend.
229 */
230
231 LOCAL(boolean)
process_restart(j_decompress_ptr cinfo)232 process_restart (j_decompress_ptr cinfo)
233 {
234 phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
235 int ci;
236
237 /* Throw away any unused bits remaining in bit buffer; */
238 /* include any full bytes in next_marker's count of discarded bytes */
239 cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
240 entropy->bitstate.bits_left = 0;
241
242 /* Advance past the RSTn marker */
243 if (! (*cinfo->marker->read_restart_marker) (cinfo))
244 return FALSE;
245
246 /* Re-initialize DC predictions to 0 */
247 for (ci = 0; ci < cinfo->comps_in_scan; ci++)
248 entropy->saved.last_dc_val[ci] = 0;
249 /* Re-init EOB run count, too */
250 entropy->saved.EOBRUN = 0;
251
252 /* Reset restart counter */
253 entropy->restarts_to_go = cinfo->restart_interval;
254
255 /* Reset out-of-data flag, unless read_restart_marker left us smack up
256 * against a marker. In that case we will end up treating the next data
257 * segment as empty, and we can avoid producing bogus output pixels by
258 * leaving the flag set.
259 */
260 if (cinfo->unread_marker == 0)
261 entropy->pub.insufficient_data = FALSE;
262
263 return TRUE;
264 }
265
266
267 /*
268 * Huffman MCU decoding.
269 * Each of these routines decodes and returns one MCU's worth of
270 * Huffman-compressed coefficients.
271 * The coefficients are reordered from zigzag order into natural array order,
272 * but are not dequantized.
273 *
274 * The i'th block of the MCU is stored into the block pointed to by
275 * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER.
276 *
277 * We return FALSE if data source requested suspension. In that case no
278 * changes have been made to permanent state. (Exception: some output
279 * coefficients may already have been assigned. This is harmless for
280 * spectral selection, since we'll just re-assign them on the next call.
281 * Successive approximation AC refinement has to be more careful, however.)
282 */
283
284 /*
285 * MCU decoding for DC initial scan (either spectral selection,
286 * or first pass of successive approximation).
287 */
288
289 METHODDEF(boolean)
decode_mcu_DC_first(j_decompress_ptr cinfo,JBLOCKROW * MCU_data)290 decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
291 {
292 phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
293 int Al = cinfo->Al;
294 register int s, r;
295 int blkn, ci;
296 JBLOCKROW block;
297 BITREAD_STATE_VARS;
298 savable_state state;
299 d_derived_tbl * tbl;
300 jpeg_component_info * compptr;
301
302 /* Process restart marker if needed; may have to suspend */
303 if (cinfo->restart_interval) {
304 if (entropy->restarts_to_go == 0)
305 if (! process_restart(cinfo))
306 return FALSE;
307 }
308
309 /* If we've run out of data, just leave the MCU set to zeroes.
310 * This way, we return uniform gray for the remainder of the segment.
311 */
312 if (! entropy->pub.insufficient_data) {
313
314 /* Load up working state */
315 BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
316 ASSIGN_STATE(state, entropy->saved);
317
318 /* Outer loop handles each block in the MCU */
319
320 for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
321 block = MCU_data[blkn];
322 ci = cinfo->MCU_membership[blkn];
323 compptr = cinfo->cur_comp_info[ci];
324 tbl = entropy->derived_tbls[compptr->dc_tbl_no];
325
326 /* Decode a single block's worth of coefficients */
327
328 /* Section F.2.2.1: decode the DC coefficient difference */
329 HUFF_DECODE(s, br_state, tbl, return FALSE, label1);
330 if (s) {
331 CHECK_BIT_BUFFER(br_state, s, return FALSE);
332 r = GET_BITS(s);
333 s = HUFF_EXTEND(r, s);
334 }
335
336 /* Convert DC difference to actual value, update last_dc_val */
337 s += state.last_dc_val[ci];
338 state.last_dc_val[ci] = s;
339 /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */
340 (*block)[0] = (JCOEF) (s << Al);
341 }
342
343 /* Completed MCU, so update state */
344 BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
345 ASSIGN_STATE(entropy->saved, state);
346 }
347
348 /* Account for restart interval (no-op if not using restarts) */
349 entropy->restarts_to_go--;
350
351 return TRUE;
352 }
353
354
355 /*
356 * MCU decoding for AC initial scan (either spectral selection,
357 * or first pass of successive approximation).
358 */
359
360 METHODDEF(boolean)
decode_mcu_AC_first(j_decompress_ptr cinfo,JBLOCKROW * MCU_data)361 decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
362 {
363 phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
364 int Se = cinfo->Se;
365 int Al = cinfo->Al;
366 register int s, k, r;
367 unsigned int EOBRUN;
368 JBLOCKROW block;
369 BITREAD_STATE_VARS;
370 d_derived_tbl * tbl;
371
372 /* Process restart marker if needed; may have to suspend */
373 if (cinfo->restart_interval) {
374 if (entropy->restarts_to_go == 0)
375 if (! process_restart(cinfo))
376 return FALSE;
377 }
378
379 /* If we've run out of data, just leave the MCU set to zeroes.
380 * This way, we return uniform gray for the remainder of the segment.
381 */
382 if (! entropy->pub.insufficient_data) {
383
384 /* Load up working state.
385 * We can avoid loading/saving bitread state if in an EOB run.
386 */
387 EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */
388
389 /* There is always only one block per MCU */
390
391 if (EOBRUN > 0) /* if it's a band of zeroes... */
392 EOBRUN--; /* ...process it now (we do nothing) */
393 else {
394 BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
395 block = MCU_data[0];
396 tbl = entropy->ac_derived_tbl;
397
398 for (k = cinfo->Ss; k <= Se; k++) {
399 HUFF_DECODE(s, br_state, tbl, return FALSE, label2);
400 r = s >> 4;
401 s &= 15;
402 if (s) {
403 k += r;
404 CHECK_BIT_BUFFER(br_state, s, return FALSE);
405 r = GET_BITS(s);
406 s = HUFF_EXTEND(r, s);
407 /* Scale and output coefficient in natural (dezigzagged) order */
408 (*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al);
409 } else {
410 if (r == 15) { /* ZRL */
411 k += 15; /* skip 15 zeroes in band */
412 } else { /* EOBr, run length is 2^r + appended bits */
413 EOBRUN = 1 << r;
414 if (r) { /* EOBr, r > 0 */
415 CHECK_BIT_BUFFER(br_state, r, return FALSE);
416 r = GET_BITS(r);
417 EOBRUN += r;
418 }
419 EOBRUN--; /* this band is processed at this moment */
420 break; /* force end-of-band */
421 }
422 }
423 }
424
425 BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
426 }
427
428 /* Completed MCU, so update state */
429 entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */
430 }
431
432 /* Account for restart interval (no-op if not using restarts) */
433 entropy->restarts_to_go--;
434
435 return TRUE;
436 }
437
438
439 /*
440 * MCU decoding for DC successive approximation refinement scan.
441 * Note: we assume such scans can be multi-component, although the spec
442 * is not very clear on the point.
443 */
444
445 METHODDEF(boolean)
decode_mcu_DC_refine(j_decompress_ptr cinfo,JBLOCKROW * MCU_data)446 decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
447 {
448 phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
449 int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */
450 int blkn;
451 JBLOCKROW block;
452 BITREAD_STATE_VARS;
453
454 /* Process restart marker if needed; may have to suspend */
455 if (cinfo->restart_interval) {
456 if (entropy->restarts_to_go == 0)
457 if (! process_restart(cinfo))
458 return FALSE;
459 }
460
461 /* Not worth the cycles to check insufficient_data here,
462 * since we will not change the data anyway if we read zeroes.
463 */
464
465 /* Load up working state */
466 BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
467
468 /* Outer loop handles each block in the MCU */
469
470 for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
471 block = MCU_data[blkn];
472
473 /* Encoded data is simply the next bit of the two's-complement DC value */
474 CHECK_BIT_BUFFER(br_state, 1, return FALSE);
475 if (GET_BITS(1))
476 (*block)[0] |= p1;
477 /* Note: since we use |=, repeating the assignment later is safe */
478 }
479
480 /* Completed MCU, so update state */
481 BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
482
483 /* Account for restart interval (no-op if not using restarts) */
484 entropy->restarts_to_go--;
485
486 return TRUE;
487 }
488
489
490 /*
491 * MCU decoding for AC successive approximation refinement scan.
492 */
493
494 METHODDEF(boolean)
decode_mcu_AC_refine(j_decompress_ptr cinfo,JBLOCKROW * MCU_data)495 decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
496 {
497 phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
498 int Se = cinfo->Se;
499 int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */
500 int m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */
501 register int s, k, r;
502 unsigned int EOBRUN;
503 JBLOCKROW block;
504 JCOEFPTR thiscoef;
505 BITREAD_STATE_VARS;
506 d_derived_tbl * tbl;
507 int num_newnz;
508 int newnz_pos[DCTSIZE2];
509
510 /* Process restart marker if needed; may have to suspend */
511 if (cinfo->restart_interval) {
512 if (entropy->restarts_to_go == 0)
513 if (! process_restart(cinfo))
514 return FALSE;
515 }
516
517 /* If we've run out of data, don't modify the MCU.
518 */
519 if (! entropy->pub.insufficient_data) {
520
521 /* Load up working state */
522 BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
523 EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */
524
525 /* There is always only one block per MCU */
526 block = MCU_data[0];
527 tbl = entropy->ac_derived_tbl;
528
529 /* If we are forced to suspend, we must undo the assignments to any newly
530 * nonzero coefficients in the block, because otherwise we'd get confused
531 * next time about which coefficients were already nonzero.
532 * But we need not undo addition of bits to already-nonzero coefficients;
533 * instead, we can test the current bit to see if we already did it.
534 */
535 num_newnz = 0;
536
537 /* initialize coefficient loop counter to start of band */
538 k = cinfo->Ss;
539
540 if (EOBRUN == 0) {
541 for (; k <= Se; k++) {
542 HUFF_DECODE(s, br_state, tbl, goto undoit, label3);
543 r = s >> 4;
544 s &= 15;
545 if (s) {
546 if (s != 1) /* size of new coef should always be 1 */
547 WARNMS(cinfo, JWRN_HUFF_BAD_CODE);
548 CHECK_BIT_BUFFER(br_state, 1, goto undoit);
549 if (GET_BITS(1))
550 s = p1; /* newly nonzero coef is positive */
551 else
552 s = m1; /* newly nonzero coef is negative */
553 } else {
554 if (r != 15) {
555 EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */
556 if (r) {
557 CHECK_BIT_BUFFER(br_state, r, goto undoit);
558 r = GET_BITS(r);
559 EOBRUN += r;
560 }
561 break; /* rest of block is handled by EOB logic */
562 }
563 /* note s = 0 for processing ZRL */
564 }
565 /* Advance over already-nonzero coefs and r still-zero coefs,
566 * appending correction bits to the nonzeroes. A correction bit is 1
567 * if the absolute value of the coefficient must be increased.
568 */
569 do {
570 thiscoef = *block + jpeg_natural_order[k];
571 if (*thiscoef != 0) {
572 CHECK_BIT_BUFFER(br_state, 1, goto undoit);
573 if (GET_BITS(1)) {
574 if ((*thiscoef & p1) == 0) { /* do nothing if already set it */
575 if (*thiscoef >= 0)
576 *thiscoef += p1;
577 else
578 *thiscoef += m1;
579 }
580 }
581 } else {
582 if (--r < 0)
583 break; /* reached target zero coefficient */
584 }
585 k++;
586 } while (k <= Se);
587 if (s) {
588 int pos = jpeg_natural_order[k];
589 /* Output newly nonzero coefficient */
590 (*block)[pos] = (JCOEF) s;
591 /* Remember its position in case we have to suspend */
592 newnz_pos[num_newnz++] = pos;
593 }
594 }
595 }
596
597 if (EOBRUN > 0) {
598 /* Scan any remaining coefficient positions after the end-of-band
599 * (the last newly nonzero coefficient, if any). Append a correction
600 * bit to each already-nonzero coefficient. A correction bit is 1
601 * if the absolute value of the coefficient must be increased.
602 */
603 for (; k <= Se; k++) {
604 thiscoef = *block + jpeg_natural_order[k];
605 if (*thiscoef != 0) {
606 CHECK_BIT_BUFFER(br_state, 1, goto undoit);
607 if (GET_BITS(1)) {
608 if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */
609 if (*thiscoef >= 0)
610 *thiscoef += p1;
611 else
612 *thiscoef += m1;
613 }
614 }
615 }
616 }
617 /* Count one block completed in EOB run */
618 EOBRUN--;
619 }
620
621 /* Completed MCU, so update state */
622 BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
623 entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */
624 }
625
626 /* Account for restart interval (no-op if not using restarts) */
627 entropy->restarts_to_go--;
628
629 return TRUE;
630
631 undoit:
632 /* Re-zero any output coefficients that we made newly nonzero */
633 while (num_newnz > 0)
634 (*block)[newnz_pos[--num_newnz]] = 0;
635
636 return FALSE;
637 }
638
639
640 /*
641 * Module initialization routine for progressive Huffman entropy decoding.
642 */
643
644 GLOBAL(void)
jinit_phuff_decoder(j_decompress_ptr cinfo)645 jinit_phuff_decoder (j_decompress_ptr cinfo)
646 {
647 phuff_entropy_ptr entropy;
648 int *coef_bit_ptr;
649 int ci, i;
650
651 entropy = (phuff_entropy_ptr)
652 (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
653 SIZEOF(phuff_entropy_decoder));
654 cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
655 entropy->pub.start_pass = start_pass_phuff_decoder;
656
657 /* Mark derived tables unallocated */
658 for (i = 0; i < NUM_HUFF_TBLS; i++) {
659 entropy->derived_tbls[i] = NULL;
660 }
661
662 /* Create progression status table */
663 cinfo->coef_bits = (int (*)[DCTSIZE2])
664 (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
665 cinfo->num_components*DCTSIZE2*SIZEOF(int));
666 coef_bit_ptr = & cinfo->coef_bits[0][0];
667 for (ci = 0; ci < cinfo->num_components; ci++)
668 for (i = 0; i < DCTSIZE2; i++)
669 *coef_bit_ptr++ = -1;
670 }
671
672 #endif /* D_PROGRESSIVE_SUPPORTED */
673