1 /* Definitions for the Blackfin port. 2 Copyright (C) 2005-2020 Free Software Foundation, Inc. 3 Contributed by Analog Devices. 4 5 This file is part of GCC. 6 7 GCC is free software; you can redistribute it and/or modify it 8 under the terms of the GNU General Public License as published 9 by the Free Software Foundation; either version 3, or (at your 10 option) any later version. 11 12 GCC is distributed in the hope that it will be useful, but WITHOUT 13 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 14 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 15 License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with GCC; see the file COPYING3. If not see 19 <http://www.gnu.org/licenses/>. */ 20 21 #ifndef _BFIN_CONFIG 22 #define _BFIN_CONFIG 23 24 #ifndef BFIN_OPTS_H 25 #include "config/bfin/bfin-opts.h" 26 #endif 27 28 #define OBJECT_FORMAT_ELF 29 30 #define BRT 1 31 #define BRF 0 32 33 /* Predefinition in the preprocessor for this target machine */ 34 #ifndef TARGET_CPU_CPP_BUILTINS 35 #define TARGET_CPU_CPP_BUILTINS() \ 36 do \ 37 { \ 38 builtin_define_std ("bfin"); \ 39 builtin_define_std ("BFIN"); \ 40 builtin_define ("__ADSPBLACKFIN__"); \ 41 builtin_define ("__ADSPLPBLACKFIN__"); \ 42 \ 43 switch (bfin_cpu_type) \ 44 { \ 45 case BFIN_CPU_UNKNOWN: \ 46 break; \ 47 case BFIN_CPU_BF512: \ 48 builtin_define ("__ADSPBF512__"); \ 49 builtin_define ("__ADSPBF51x__"); \ 50 break; \ 51 case BFIN_CPU_BF514: \ 52 builtin_define ("__ADSPBF514__"); \ 53 builtin_define ("__ADSPBF51x__"); \ 54 break; \ 55 case BFIN_CPU_BF516: \ 56 builtin_define ("__ADSPBF516__"); \ 57 builtin_define ("__ADSPBF51x__"); \ 58 break; \ 59 case BFIN_CPU_BF518: \ 60 builtin_define ("__ADSPBF518__"); \ 61 builtin_define ("__ADSPBF51x__"); \ 62 break; \ 63 case BFIN_CPU_BF522: \ 64 builtin_define ("__ADSPBF522__"); \ 65 builtin_define ("__ADSPBF52x__"); \ 66 break; \ 67 case BFIN_CPU_BF523: \ 68 builtin_define ("__ADSPBF523__"); \ 69 builtin_define ("__ADSPBF52x__"); \ 70 break; \ 71 case BFIN_CPU_BF524: \ 72 builtin_define ("__ADSPBF524__"); \ 73 builtin_define ("__ADSPBF52x__"); \ 74 break; \ 75 case BFIN_CPU_BF525: \ 76 builtin_define ("__ADSPBF525__"); \ 77 builtin_define ("__ADSPBF52x__"); \ 78 break; \ 79 case BFIN_CPU_BF526: \ 80 builtin_define ("__ADSPBF526__"); \ 81 builtin_define ("__ADSPBF52x__"); \ 82 break; \ 83 case BFIN_CPU_BF527: \ 84 builtin_define ("__ADSPBF527__"); \ 85 builtin_define ("__ADSPBF52x__"); \ 86 break; \ 87 case BFIN_CPU_BF531: \ 88 builtin_define ("__ADSPBF531__"); \ 89 break; \ 90 case BFIN_CPU_BF532: \ 91 builtin_define ("__ADSPBF532__"); \ 92 break; \ 93 case BFIN_CPU_BF533: \ 94 builtin_define ("__ADSPBF533__"); \ 95 break; \ 96 case BFIN_CPU_BF534: \ 97 builtin_define ("__ADSPBF534__"); \ 98 break; \ 99 case BFIN_CPU_BF536: \ 100 builtin_define ("__ADSPBF536__"); \ 101 break; \ 102 case BFIN_CPU_BF537: \ 103 builtin_define ("__ADSPBF537__"); \ 104 break; \ 105 case BFIN_CPU_BF538: \ 106 builtin_define ("__ADSPBF538__"); \ 107 break; \ 108 case BFIN_CPU_BF539: \ 109 builtin_define ("__ADSPBF539__"); \ 110 break; \ 111 case BFIN_CPU_BF542M: \ 112 builtin_define ("__ADSPBF542M__"); \ 113 /* FALLTHRU */ \ 114 case BFIN_CPU_BF542: \ 115 builtin_define ("__ADSPBF542__"); \ 116 builtin_define ("__ADSPBF54x__"); \ 117 break; \ 118 case BFIN_CPU_BF544M: \ 119 builtin_define ("__ADSPBF544M__"); \ 120 /* FALLTHRU */ \ 121 case BFIN_CPU_BF544: \ 122 builtin_define ("__ADSPBF544__"); \ 123 builtin_define ("__ADSPBF54x__"); \ 124 break; \ 125 case BFIN_CPU_BF547M: \ 126 builtin_define ("__ADSPBF547M__"); \ 127 /* FALLTHRU */ \ 128 case BFIN_CPU_BF547: \ 129 builtin_define ("__ADSPBF547__"); \ 130 builtin_define ("__ADSPBF54x__"); \ 131 break; \ 132 case BFIN_CPU_BF548M: \ 133 builtin_define ("__ADSPBF548M__"); \ 134 /* FALLTHRU */ \ 135 case BFIN_CPU_BF548: \ 136 builtin_define ("__ADSPBF548__"); \ 137 builtin_define ("__ADSPBF54x__"); \ 138 break; \ 139 case BFIN_CPU_BF549M: \ 140 builtin_define ("__ADSPBF549M__"); \ 141 /* FALLTHRU */ \ 142 case BFIN_CPU_BF549: \ 143 builtin_define ("__ADSPBF549__"); \ 144 builtin_define ("__ADSPBF54x__"); \ 145 break; \ 146 case BFIN_CPU_BF561: \ 147 builtin_define ("__ADSPBF561__"); \ 148 break; \ 149 case BFIN_CPU_BF592: \ 150 builtin_define ("__ADSPBF592__"); \ 151 builtin_define ("__ADSPBF59x__"); \ 152 break; \ 153 } \ 154 \ 155 if (bfin_si_revision != -1) \ 156 { \ 157 /* space of 0xnnnn and a NUL */ \ 158 char *buf = XALLOCAVEC (char, 7); \ 159 \ 160 sprintf (buf, "0x%04x", bfin_si_revision); \ 161 builtin_define_with_value ("__SILICON_REVISION__", buf, 0); \ 162 } \ 163 \ 164 if (bfin_workarounds) \ 165 builtin_define ("__WORKAROUNDS_ENABLED"); \ 166 if (ENABLE_WA_SPECULATIVE_LOADS) \ 167 builtin_define ("__WORKAROUND_SPECULATIVE_LOADS"); \ 168 if (ENABLE_WA_SPECULATIVE_SYNCS) \ 169 builtin_define ("__WORKAROUND_SPECULATIVE_SYNCS"); \ 170 if (ENABLE_WA_INDIRECT_CALLS) \ 171 builtin_define ("__WORKAROUND_INDIRECT_CALLS"); \ 172 if (ENABLE_WA_RETS) \ 173 builtin_define ("__WORKAROUND_RETS"); \ 174 \ 175 if (TARGET_FDPIC) \ 176 { \ 177 builtin_define ("__BFIN_FDPIC__"); \ 178 builtin_define ("__FDPIC__"); \ 179 } \ 180 if (TARGET_ID_SHARED_LIBRARY \ 181 && !TARGET_SEP_DATA) \ 182 builtin_define ("__ID_SHARED_LIB__"); \ 183 if (flag_no_builtin) \ 184 builtin_define ("__NO_BUILTIN"); \ 185 if (TARGET_MULTICORE) \ 186 builtin_define ("__BFIN_MULTICORE"); \ 187 if (TARGET_COREA) \ 188 builtin_define ("__BFIN_COREA"); \ 189 if (TARGET_COREB) \ 190 builtin_define ("__BFIN_COREB"); \ 191 if (TARGET_SDRAM) \ 192 builtin_define ("__BFIN_SDRAM"); \ 193 } \ 194 while (0) 195 #endif 196 197 #define DRIVER_SELF_SPECS SUBTARGET_DRIVER_SELF_SPECS "\ 198 %{mleaf-id-shared-library:%{!mid-shared-library:-mid-shared-library}} \ 199 %{mfdpic:%{!fpic:%{!fpie:%{!fPIC:%{!fPIE:\ 200 %{!fno-pic:%{!fno-pie:%{!fno-PIC:%{!fno-PIE:-fpie}}}}}}}}} \ 201 " 202 #ifndef SUBTARGET_DRIVER_SELF_SPECS 203 # define SUBTARGET_DRIVER_SELF_SPECS 204 #endif 205 206 #define LINK_GCC_C_SEQUENCE_SPEC "\ 207 %{mfast-fp:-lbffastfp} %G %{!nolibc:%L} %{mfast-fp:-lbffastfp} %G \ 208 " 209 210 #undef ASM_SPEC 211 #define ASM_SPEC "\ 212 %{mno-fdpic:-mnopic} %{mfdpic}" 213 214 #define LINK_SPEC "\ 215 %{h*} %{v:-V} \ 216 %{mfdpic:-melf32bfinfd -z text} \ 217 %{static:-dn -Bstatic} \ 218 %{shared:-G -Bdynamic} \ 219 %{symbolic:-Bsymbolic} \ 220 -init __init -fini __fini " 221 222 /* Generate DSP instructions, like DSP halfword loads */ 223 #define TARGET_DSP (1) 224 225 #define TARGET_DEFAULT 0 226 227 /* Maximum number of library ids we permit */ 228 #define MAX_LIBRARY_ID 255 229 230 extern const char *bfin_library_id_string; 231 232 #define FUNCTION_MODE SImode 233 #define Pmode SImode 234 235 /* store-condition-codes instructions store 0 for false 236 This is the value stored for true. */ 237 #define STORE_FLAG_VALUE 1 238 239 /* Define this if pushing a word on the stack 240 makes the stack pointer a smaller address. */ 241 #define STACK_GROWS_DOWNWARD 1 242 243 #define STACK_PUSH_CODE PRE_DEC 244 245 /* Define this to nonzero if the nominal address of the stack frame 246 is at the high-address end of the local variables; 247 that is, each additional local variable allocated 248 goes at a more negative offset in the frame. */ 249 #define FRAME_GROWS_DOWNWARD 1 250 251 /* We define a dummy ARGP register; the parameters start at offset 0 from 252 it. */ 253 #define FIRST_PARM_OFFSET(DECL) 0 254 255 /* Register to use for pushing function arguments. */ 256 #define STACK_POINTER_REGNUM REG_P6 257 258 /* Base register for access to local variables of the function. */ 259 #define FRAME_POINTER_REGNUM REG_P7 260 261 /* A dummy register that will be eliminated to either FP or SP. */ 262 #define ARG_POINTER_REGNUM REG_ARGP 263 264 /* `PIC_OFFSET_TABLE_REGNUM' 265 The register number of the register used to address a table of 266 static data addresses in memory. In some cases this register is 267 defined by a processor's "application binary interface" (ABI). 268 When this macro is defined, RTL is generated for this register 269 once, as with the stack pointer and frame pointer registers. If 270 this macro is not defined, it is up to the machine-dependent files 271 to allocate such a register (if necessary). */ 272 #define PIC_OFFSET_TABLE_REGNUM (REG_P5) 273 274 #define FDPIC_FPTR_REGNO REG_P1 275 #define FDPIC_REGNO REG_P3 276 #define OUR_FDPIC_REG get_hard_reg_initial_val (SImode, FDPIC_REGNO) 277 278 /* A static chain register for nested functions. We need to use a 279 call-clobbered register for this. */ 280 #define STATIC_CHAIN_REGNUM REG_P2 281 282 /* Define this if functions should assume that stack space has been 283 allocated for arguments even when their values are passed in 284 registers. 285 286 The value of this macro is the size, in bytes, of the area reserved for 287 arguments passed in registers. 288 289 This space can either be allocated by the caller or be a part of the 290 machine-dependent stack frame: `OUTGOING_REG_PARM_STACK_SPACE' 291 says which. */ 292 #define FIXED_STACK_AREA 12 293 #define REG_PARM_STACK_SPACE(FNDECL) FIXED_STACK_AREA 294 295 /* Define this if the above stack space is to be considered part of the 296 * space allocated by the caller. */ 297 #define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1 298 299 /* Define this if the maximum size of all the outgoing args is to be 300 accumulated and pushed during the prologue. The amount can be 301 found in the variable crtl->outgoing_args_size. */ 302 #define ACCUMULATE_OUTGOING_ARGS 1 303 304 /*#define DATA_ALIGNMENT(TYPE, BASIC-ALIGN) for arrays.. */ 305 306 /* If defined, a C expression to compute the alignment for a local 307 variable. TYPE is the data type, and ALIGN is the alignment that 308 the object would ordinarily have. The value of this macro is used 309 instead of that alignment to align the object. 310 311 If this macro is not defined, then ALIGN is used. 312 313 One use of this macro is to increase alignment of medium-size 314 data to make it all fit in fewer cache lines. */ 315 316 #define LOCAL_ALIGNMENT(TYPE, ALIGN) bfin_local_alignment ((TYPE), (ALIGN)) 317 318 #define TRAMPOLINE_SIZE (TARGET_FDPIC ? 30 : 18) 319 320 /* Definitions for register eliminations. 321 322 This is an array of structures. Each structure initializes one pair 323 of eliminable registers. The "from" register number is given first, 324 followed by "to". Eliminations of the same "from" register are listed 325 in order of preference. 326 327 There are two registers that can always be eliminated on the i386. 328 The frame pointer and the arg pointer can be replaced by either the 329 hard frame pointer or to the stack pointer, depending upon the 330 circumstances. The hard frame pointer is not used before reload and 331 so it is not eligible for elimination. */ 332 333 #define ELIMINABLE_REGS \ 334 {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ 335 { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \ 336 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}} \ 337 338 /* Define the offset between two registers, one to be eliminated, and the other 339 its replacement, at the start of a routine. */ 340 341 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ 342 ((OFFSET) = bfin_initial_elimination_offset ((FROM), (TO))) 343 344 /* This processor has 345 8 data register for doing arithmetic 346 8 pointer register for doing addressing, including 347 1 stack pointer P6 348 1 frame pointer P7 349 4 sets of indexing registers (I0-3, B0-3, L0-3, M0-3) 350 1 condition code flag register CC 351 5 return address registers RETS/I/X/N/E 352 1 arithmetic status register (ASTAT). */ 353 354 #define FIRST_PSEUDO_REGISTER 50 355 356 #define D_REGNO_P(X) ((X) <= REG_R7) 357 #define P_REGNO_P(X) ((X) >= REG_P0 && (X) <= REG_P7) 358 #define I_REGNO_P(X) ((X) >= REG_I0 && (X) <= REG_I3) 359 #define DP_REGNO_P(X) (D_REGNO_P (X) || P_REGNO_P (X)) 360 #define ADDRESS_REGNO_P(X) ((X) >= REG_P0 && (X) <= REG_M3) 361 #define DREG_P(X) (REG_P (X) && D_REGNO_P (REGNO (X))) 362 #define PREG_P(X) (REG_P (X) && P_REGNO_P (REGNO (X))) 363 #define IREG_P(X) (REG_P (X) && I_REGNO_P (REGNO (X))) 364 #define DPREG_P(X) (REG_P (X) && DP_REGNO_P (REGNO (X))) 365 366 #define REGISTER_NAMES { \ 367 "R0", "R1", "R2", "R3", "R4", "R5", "R6", "R7", \ 368 "P0", "P1", "P2", "P3", "P4", "P5", "SP", "FP", \ 369 "I0", "I1", "I2", "I3", "B0", "B1", "B2", "B3", \ 370 "L0", "L1", "L2", "L3", "M0", "M1", "M2", "M3", \ 371 "A0", "A1", \ 372 "CC", \ 373 "RETS", "RETI", "RETX", "RETN", "RETE", "ASTAT", "SEQSTAT", "USP", \ 374 "ARGP", \ 375 "LT0", "LT1", "LC0", "LC1", "LB0", "LB1" \ 376 } 377 378 #define SHORT_REGISTER_NAMES { \ 379 "R0.L", "R1.L", "R2.L", "R3.L", "R4.L", "R5.L", "R6.L", "R7.L", \ 380 "P0.L", "P1.L", "P2.L", "P3.L", "P4.L", "P5.L", "SP.L", "FP.L", \ 381 "I0.L", "I1.L", "I2.L", "I3.L", "B0.L", "B1.L", "B2.L", "B3.L", \ 382 "L0.L", "L1.L", "L2.L", "L3.L", "M0.L", "M1.L", "M2.L", "M3.L", } 383 384 #define HIGH_REGISTER_NAMES { \ 385 "R0.H", "R1.H", "R2.H", "R3.H", "R4.H", "R5.H", "R6.H", "R7.H", \ 386 "P0.H", "P1.H", "P2.H", "P3.H", "P4.H", "P5.H", "SP.H", "FP.H", \ 387 "I0.H", "I1.H", "I2.H", "I3.H", "B0.H", "B1.H", "B2.H", "B3.H", \ 388 "L0.H", "L1.H", "L2.H", "L3.H", "M0.H", "M1.H", "M2.H", "M3.H", } 389 390 #define DREGS_PAIR_NAMES { \ 391 "R1:0.p", 0, "R3:2.p", 0, "R5:4.p", 0, "R7:6.p", 0, } 392 393 #define BYTE_REGISTER_NAMES { \ 394 "R0.B", "R1.B", "R2.B", "R3.B", "R4.B", "R5.B", "R6.B", "R7.B", } 395 396 397 /* 1 for registers that have pervasive standard uses 398 and are not available for the register allocator. */ 399 400 #define FIXED_REGISTERS \ 401 /*r0 r1 r2 r3 r4 r5 r6 r7 p0 p1 p2 p3 p4 p5 p6 p7 */ \ 402 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, \ 403 /*i0 i1 i2 i3 b0 b1 b2 b3 l0 l1 l2 l3 m0 m1 m2 m3 */ \ 404 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, \ 405 /*a0 a1 cc rets/i/x/n/e astat seqstat usp argp lt0/1 lc0/1 */ \ 406 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 407 /*lb0/1 */ \ 408 1, 1 \ 409 } 410 411 /* 1 for registers not available across function calls. 412 These must include the FIXED_REGISTERS and also any 413 registers that can be used without being saved. 414 The latter must include the registers where values are returned 415 and the register where structure-value addresses are passed. 416 Aside from that, you can include as many other registers as you like. */ 417 418 #define CALL_USED_REGISTERS \ 419 /*r0 r1 r2 r3 r4 r5 r6 r7 p0 p1 p2 p3 p4 p5 p6 p7 */ \ 420 { 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 0, 0, 0, 1, 0, \ 421 /*i0 i1 i2 i3 b0 b1 b2 b3 l0 l1 l2 l3 m0 m1 m2 m3 */ \ 422 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 423 /*a0 a1 cc rets/i/x/n/e astat seqstat usp argp lt0/1 lc0/1 */ \ 424 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ 425 /*lb0/1 */ \ 426 1, 1 \ 427 } 428 429 /* Order in which to allocate registers. Each register must be 430 listed once, even those in FIXED_REGISTERS. List frame pointer 431 late and fixed registers last. Note that, in general, we prefer 432 registers listed in CALL_USED_REGISTERS, keeping the others 433 available for storage of persistent values. */ 434 435 #define REG_ALLOC_ORDER \ 436 { REG_R0, REG_R1, REG_R2, REG_R3, REG_R7, REG_R6, REG_R5, REG_R4, \ 437 REG_P2, REG_P1, REG_P0, REG_P5, REG_P4, REG_P3, REG_P6, REG_P7, \ 438 REG_A0, REG_A1, \ 439 REG_I0, REG_I1, REG_I2, REG_I3, REG_B0, REG_B1, REG_B2, REG_B3, \ 440 REG_L0, REG_L1, REG_L2, REG_L3, REG_M0, REG_M1, REG_M2, REG_M3, \ 441 REG_RETS, REG_RETI, REG_RETX, REG_RETN, REG_RETE, \ 442 REG_ASTAT, REG_SEQSTAT, REG_USP, \ 443 REG_CC, REG_ARGP, \ 444 REG_LT0, REG_LT1, REG_LC0, REG_LC1, REG_LB0, REG_LB1 \ 445 } 446 447 /* Define the classes of registers for register constraints in the 448 machine description. Also define ranges of constants. 449 450 One of the classes must always be named ALL_REGS and include all hard regs. 451 If there is more than one class, another class must be named NO_REGS 452 and contain no registers. 453 454 The name GENERAL_REGS must be the name of a class (or an alias for 455 another name such as ALL_REGS). This is the class of registers 456 that is allowed by "g" or "r" in a register constraint. 457 Also, registers outside this class are allocated only when 458 instructions express preferences for them. 459 460 The classes must be numbered in nondecreasing order; that is, 461 a larger-numbered class must never be contained completely 462 in a smaller-numbered class. 463 464 For any two classes, it is very desirable that there be another 465 class that represents their union. */ 466 467 468 enum reg_class 469 { 470 NO_REGS, 471 IREGS, 472 BREGS, 473 LREGS, 474 MREGS, 475 CIRCREGS, /* Circular buffering registers, Ix, Bx, Lx together form. See Automatic Circular Buffering. */ 476 DAGREGS, 477 EVEN_AREGS, 478 ODD_AREGS, 479 AREGS, 480 CCREGS, 481 EVEN_DREGS, 482 ODD_DREGS, 483 D0REGS, 484 D1REGS, 485 D2REGS, 486 D3REGS, 487 D4REGS, 488 D5REGS, 489 D6REGS, 490 D7REGS, 491 DREGS, 492 P0REGS, 493 FDPIC_REGS, 494 FDPIC_FPTR_REGS, 495 PREGS_CLOBBERED, 496 PREGS, 497 IPREGS, 498 DPREGS, 499 MOST_REGS, 500 LT_REGS, 501 LC_REGS, 502 LB_REGS, 503 PROLOGUE_REGS, 504 NON_A_CC_REGS, 505 ALL_REGS, LIM_REG_CLASSES 506 }; 507 508 #define N_REG_CLASSES ((int)LIM_REG_CLASSES) 509 510 #define GENERAL_REGS DPREGS 511 512 /* Give names of register classes as strings for dump file. */ 513 514 #define REG_CLASS_NAMES \ 515 { "NO_REGS", \ 516 "IREGS", \ 517 "BREGS", \ 518 "LREGS", \ 519 "MREGS", \ 520 "CIRCREGS", \ 521 "DAGREGS", \ 522 "EVEN_AREGS", \ 523 "ODD_AREGS", \ 524 "AREGS", \ 525 "CCREGS", \ 526 "EVEN_DREGS", \ 527 "ODD_DREGS", \ 528 "D0REGS", \ 529 "D1REGS", \ 530 "D2REGS", \ 531 "D3REGS", \ 532 "D4REGS", \ 533 "D5REGS", \ 534 "D6REGS", \ 535 "D7REGS", \ 536 "DREGS", \ 537 "P0REGS", \ 538 "FDPIC_REGS", \ 539 "FDPIC_FPTR_REGS", \ 540 "PREGS_CLOBBERED", \ 541 "PREGS", \ 542 "IPREGS", \ 543 "DPREGS", \ 544 "MOST_REGS", \ 545 "LT_REGS", \ 546 "LC_REGS", \ 547 "LB_REGS", \ 548 "PROLOGUE_REGS", \ 549 "NON_A_CC_REGS", \ 550 "ALL_REGS" } 551 552 /* An initializer containing the contents of the register classes, as integers 553 which are bit masks. The Nth integer specifies the contents of class N. 554 The way the integer MASK is interpreted is that register R is in the class 555 if `MASK & (1 << R)' is 1. 556 557 When the machine has more than 32 registers, an integer does not suffice. 558 Then the integers are replaced by sub-initializers, braced groupings 559 containing several integers. Each sub-initializer must be suitable as an 560 initializer for the type `HARD_REG_SET' which is defined in 561 `hard-reg-set.h'. */ 562 563 /* NOTE: DSP registers, IREGS - AREGS, are not GENERAL_REGS. We use 564 MOST_REGS as the union of DPREGS and DAGREGS. */ 565 566 #define REG_CLASS_CONTENTS \ 567 /* 31 - 0 63-32 */ \ 568 { { 0x00000000, 0 }, /* NO_REGS */ \ 569 { 0x000f0000, 0 }, /* IREGS */ \ 570 { 0x00f00000, 0 }, /* BREGS */ \ 571 { 0x0f000000, 0 }, /* LREGS */ \ 572 { 0xf0000000, 0 }, /* MREGS */ \ 573 { 0x0fff0000, 0 }, /* CIRCREGS */ \ 574 { 0xffff0000, 0 }, /* DAGREGS */ \ 575 { 0x00000000, 0x1 }, /* EVEN_AREGS */ \ 576 { 0x00000000, 0x2 }, /* ODD_AREGS */ \ 577 { 0x00000000, 0x3 }, /* AREGS */ \ 578 { 0x00000000, 0x4 }, /* CCREGS */ \ 579 { 0x00000055, 0 }, /* EVEN_DREGS */ \ 580 { 0x000000aa, 0 }, /* ODD_DREGS */ \ 581 { 0x00000001, 0 }, /* D0REGS */ \ 582 { 0x00000002, 0 }, /* D1REGS */ \ 583 { 0x00000004, 0 }, /* D2REGS */ \ 584 { 0x00000008, 0 }, /* D3REGS */ \ 585 { 0x00000010, 0 }, /* D4REGS */ \ 586 { 0x00000020, 0 }, /* D5REGS */ \ 587 { 0x00000040, 0 }, /* D6REGS */ \ 588 { 0x00000080, 0 }, /* D7REGS */ \ 589 { 0x000000ff, 0 }, /* DREGS */ \ 590 { 0x00000100, 0x000 }, /* P0REGS */ \ 591 { 0x00000800, 0x000 }, /* FDPIC_REGS */ \ 592 { 0x00000200, 0x000 }, /* FDPIC_FPTR_REGS */ \ 593 { 0x00004700, 0x800 }, /* PREGS_CLOBBERED */ \ 594 { 0x0000ff00, 0x800 }, /* PREGS */ \ 595 { 0x000fff00, 0x800 }, /* IPREGS */ \ 596 { 0x0000ffff, 0x800 }, /* DPREGS */ \ 597 { 0xffffffff, 0x800 }, /* MOST_REGS */\ 598 { 0x00000000, 0x3000 }, /* LT_REGS */\ 599 { 0x00000000, 0xc000 }, /* LC_REGS */\ 600 { 0x00000000, 0x30000 }, /* LB_REGS */\ 601 { 0x00000000, 0x3f7f8 }, /* PROLOGUE_REGS */\ 602 { 0xffffffff, 0x3fff8 }, /* NON_A_CC_REGS */\ 603 { 0xffffffff, 0x3ffff }} /* ALL_REGS */ 604 605 #define IREG_POSSIBLE_P(OUTER) \ 606 ((OUTER) == POST_INC || (OUTER) == PRE_INC \ 607 || (OUTER) == POST_DEC || (OUTER) == PRE_DEC \ 608 || (OUTER) == MEM || (OUTER) == ADDRESS) 609 610 #define MODE_CODE_BASE_REG_CLASS(MODE, AS, OUTER, INDEX) \ 611 ((MODE) == HImode && IREG_POSSIBLE_P (OUTER) ? IPREGS : PREGS) 612 613 #define INDEX_REG_CLASS PREGS 614 615 #define REGNO_OK_FOR_BASE_STRICT_P(X, MODE, OUTER, INDEX) \ 616 (P_REGNO_P (X) || (X) == REG_ARGP \ 617 || (IREG_POSSIBLE_P (OUTER) && (MODE) == HImode \ 618 && I_REGNO_P (X))) 619 620 #define REGNO_OK_FOR_BASE_NONSTRICT_P(X, MODE, OUTER, INDEX) \ 621 ((X) >= FIRST_PSEUDO_REGISTER \ 622 || REGNO_OK_FOR_BASE_STRICT_P (X, MODE, OUTER, INDEX)) 623 624 #ifdef REG_OK_STRICT 625 #define REGNO_MODE_CODE_OK_FOR_BASE_P(X, MODE, AS, OUTER, INDEX) \ 626 REGNO_OK_FOR_BASE_STRICT_P (X, MODE, OUTER, INDEX) 627 #else 628 #define REGNO_MODE_CODE_OK_FOR_BASE_P(X, MODE, AS, OUTER, INDEX) \ 629 REGNO_OK_FOR_BASE_NONSTRICT_P (X, MODE, OUTER, INDEX) 630 #endif 631 632 #define REGNO_OK_FOR_INDEX_P(X) 0 633 634 /* The same information, inverted: 635 Return the class number of the smallest class containing 636 reg number REGNO. This could be a conditional expression 637 or could index an array. */ 638 639 #define REGNO_REG_CLASS(REGNO) \ 640 ((REGNO) == REG_R0 ? D0REGS \ 641 : (REGNO) == REG_R1 ? D1REGS \ 642 : (REGNO) == REG_R2 ? D2REGS \ 643 : (REGNO) == REG_R3 ? D3REGS \ 644 : (REGNO) == REG_R4 ? D4REGS \ 645 : (REGNO) == REG_R5 ? D5REGS \ 646 : (REGNO) == REG_R6 ? D6REGS \ 647 : (REGNO) == REG_R7 ? D7REGS \ 648 : (REGNO) == REG_P0 ? P0REGS \ 649 : (REGNO) < REG_I0 ? PREGS \ 650 : (REGNO) == REG_ARGP ? PREGS \ 651 : (REGNO) >= REG_I0 && (REGNO) <= REG_I3 ? IREGS \ 652 : (REGNO) >= REG_L0 && (REGNO) <= REG_L3 ? LREGS \ 653 : (REGNO) >= REG_B0 && (REGNO) <= REG_B3 ? BREGS \ 654 : (REGNO) >= REG_M0 && (REGNO) <= REG_M3 ? MREGS \ 655 : (REGNO) == REG_A0 || (REGNO) == REG_A1 ? AREGS \ 656 : (REGNO) == REG_LT0 || (REGNO) == REG_LT1 ? LT_REGS \ 657 : (REGNO) == REG_LC0 || (REGNO) == REG_LC1 ? LC_REGS \ 658 : (REGNO) == REG_LB0 || (REGNO) == REG_LB1 ? LB_REGS \ 659 : (REGNO) == REG_CC ? CCREGS \ 660 : (REGNO) >= REG_RETS ? PROLOGUE_REGS \ 661 : NO_REGS) 662 663 /* When this hook returns true for MODE, the compiler allows 664 registers explicitly used in the rtl to be used as spill registers 665 but prevents the compiler from extending the lifetime of these 666 registers. */ 667 #define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true 668 669 /* Return the maximum number of consecutive registers 670 needed to represent mode MODE in a register of class CLASS. */ 671 #define CLASS_MAX_NREGS(CLASS, MODE) \ 672 ((MODE) == V2PDImode && (CLASS) == AREGS ? 2 \ 673 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)) 674 675 /* A C expression that is nonzero if hard register TO can be 676 considered for use as a rename register for FROM register */ 677 #define HARD_REGNO_RENAME_OK(FROM, TO) bfin_hard_regno_rename_ok (FROM, TO) 678 679 /* `PREFERRED_RELOAD_CLASS (X, CLASS)' 680 A C expression that places additional restrictions on the register 681 class to use when it is necessary to copy value X into a register 682 in class CLASS. The value is a register class; perhaps CLASS, or 683 perhaps another, smaller class. */ 684 #define PREFERRED_RELOAD_CLASS(X, CLASS) \ 685 (GET_CODE (X) == POST_INC \ 686 || GET_CODE (X) == POST_DEC \ 687 || GET_CODE (X) == PRE_DEC ? PREGS : (CLASS)) 688 689 /* Function Calling Conventions. */ 690 691 /* The type of the current function; normal functions are of type 692 SUBROUTINE. */ 693 typedef enum { 694 SUBROUTINE, INTERRUPT_HANDLER, EXCPT_HANDLER, NMI_HANDLER 695 } e_funkind; 696 #define FUNCTION_RETURN_REGISTERS { REG_RETS, REG_RETI, REG_RETX, REG_RETN } 697 698 #define FUNCTION_ARG_REGISTERS { REG_R0, REG_R1, REG_R2, -1 } 699 700 /* Flags for the call/call_value rtl operations set up by function_arg */ 701 #define CALL_NORMAL 0x00000000 /* no special processing */ 702 #define CALL_LONG 0x00000001 /* always call indirect */ 703 #define CALL_SHORT 0x00000002 /* always call by symbol */ 704 705 typedef struct { 706 int words; /* # words passed so far */ 707 int nregs; /* # registers available for passing */ 708 int *arg_regs; /* array of register -1 terminated */ 709 int call_cookie; /* Do special things for this call */ 710 } CUMULATIVE_ARGS; 711 712 #define FUNCTION_ARG_REGNO_P(REGNO) function_arg_regno_p (REGNO) 713 714 715 /* Initialize a variable CUM of type CUMULATIVE_ARGS 716 for a call to a function whose data type is FNTYPE. 717 For a library call, FNTYPE is 0. */ 718 #define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME,INDIRECT, N_NAMED_ARGS) \ 719 (init_cumulative_args (&CUM, FNTYPE, LIBNAME)) 720 721 /* Define how to find the value returned by a function. 722 VALTYPE is the data type of the value (as a tree). 723 If the precise function being called is known, FUNC is its FUNCTION_DECL; 724 otherwise, FUNC is 0. 725 */ 726 727 #define VALUE_REGNO(MODE) (REG_R0) 728 729 #define FUNCTION_VALUE(VALTYPE, FUNC) \ 730 gen_rtx_REG (TYPE_MODE (VALTYPE), \ 731 VALUE_REGNO(TYPE_MODE(VALTYPE))) 732 733 /* Define how to find the value returned by a library function 734 assuming the value has mode MODE. */ 735 736 #define LIBCALL_VALUE(MODE) gen_rtx_REG (MODE, VALUE_REGNO(MODE)) 737 738 #define FUNCTION_VALUE_REGNO_P(N) ((N) == REG_R0) 739 740 #define DEFAULT_PCC_STRUCT_RETURN 0 741 742 /* Before the prologue, the return address is in the RETS register. */ 743 #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, REG_RETS) 744 745 #define RETURN_ADDR_RTX(COUNT, FRAME) bfin_return_addr_rtx (COUNT) 746 747 #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (REG_RETS) 748 749 /* Call instructions don't modify the stack pointer on the Blackfin. */ 750 #define INCOMING_FRAME_SP_OFFSET 0 751 752 /* Describe how we implement __builtin_eh_return. */ 753 #define EH_RETURN_DATA_REGNO(N) ((N) < 2 ? (N) : INVALID_REGNUM) 754 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, REG_P2) 755 #define EH_RETURN_HANDLER_RTX \ 756 gen_frame_mem (Pmode, plus_constant (Pmode, frame_pointer_rtx, \ 757 UNITS_PER_WORD)) 758 759 /* Addressing Modes */ 760 761 /* A number, the maximum number of registers that can appear in a 762 valid memory address. Note that it is up to you to specify a 763 value equal to the maximum number that `TARGET_LEGITIMATE_ADDRESS_P' 764 would ever accept. */ 765 #define MAX_REGS_PER_ADDRESS 1 766 767 #define LEGITIMATE_MODE_FOR_AUTOINC_P(MODE) \ 768 (GET_MODE_SIZE (MODE) <= 4 || (MODE) == PDImode) 769 770 #define HAVE_POST_INCREMENT 1 771 #define HAVE_POST_DECREMENT 1 772 #define HAVE_PRE_DECREMENT 1 773 774 /* `LEGITIMATE_PIC_OPERAND_P (X)' 775 A C expression that is nonzero if X is a legitimate immediate 776 operand on the target machine when generating position independent 777 code. You can assume that X satisfies `CONSTANT_P', so you need 778 not check this. You can also assume FLAG_PIC is true, so you need 779 not check it either. You need not define this macro if all 780 constants (including `SYMBOL_REF') can be immediate operands when 781 generating position independent code. */ 782 #define LEGITIMATE_PIC_OPERAND_P(X) ! SYMBOLIC_CONST (X) 783 784 #define SYMBOLIC_CONST(X) \ 785 (GET_CODE (X) == SYMBOL_REF \ 786 || GET_CODE (X) == LABEL_REF \ 787 || (GET_CODE (X) == CONST && symbolic_reference_mentioned_p (X))) 788 789 #define NOTICE_UPDATE_CC(EXPR, INSN) 0 790 791 /* Max number of bytes we can move from memory to memory 792 in one reasonably fast instruction. */ 793 #define MOVE_MAX UNITS_PER_WORD 794 795 /* If a memory-to-memory move would take MOVE_RATIO or more simple 796 move-instruction pairs, we will do a cpymem or libcall instead. */ 797 798 #define MOVE_RATIO(speed) 5 799 800 /* STORAGE LAYOUT: target machine storage layout 801 Define this macro as a C expression which is nonzero if accessing 802 less than a word of memory (i.e. a `char' or a `short') is no 803 faster than accessing a word of memory, i.e., if such access 804 require more than one instruction or if there is no difference in 805 cost between byte and (aligned) word loads. 806 807 When this macro is not defined, the compiler will access a field by 808 finding the smallest containing object; when it is defined, a 809 fullword load will be used if alignment permits. Unless bytes 810 accesses are faster than word accesses, using word accesses is 811 preferable since it may eliminate subsequent memory access if 812 subsequent accesses occur to other fields in the same word of the 813 structure, but to different bytes. */ 814 #define SLOW_BYTE_ACCESS 0 815 #define SLOW_SHORT_ACCESS 0 816 817 /* Define this if most significant bit is lowest numbered 818 in instructions that operate on numbered bit-fields. */ 819 #define BITS_BIG_ENDIAN 0 820 821 /* Define this if most significant byte of a word is the lowest numbered. 822 We can't access bytes but if we could we would in the Big Endian order. */ 823 #define BYTES_BIG_ENDIAN 0 824 825 /* Define this if most significant word of a multiword number is numbered. */ 826 #define WORDS_BIG_ENDIAN 0 827 828 /* Width in bits of a "word", which is the contents of a machine register. 829 Note that this is not necessarily the width of data type `int'; 830 if using 16-bit ints on a 68000, this would still be 32. 831 But on a machine with 16-bit registers, this would be 16. */ 832 #define BITS_PER_WORD 32 833 834 /* Width of a word, in units (bytes). */ 835 #define UNITS_PER_WORD 4 836 837 /* Width in bits of a pointer. 838 See also the macro `Pmode1' defined below. */ 839 #define POINTER_SIZE 32 840 841 /* Allocation boundary (in *bits*) for storing pointers in memory. */ 842 #define POINTER_BOUNDARY 32 843 844 /* Allocation boundary (in *bits*) for storing arguments in argument list. */ 845 #define PARM_BOUNDARY 32 846 847 /* Boundary (in *bits*) on which stack pointer should be aligned. */ 848 #define STACK_BOUNDARY 32 849 850 /* Allocation boundary (in *bits*) for the code of a function. */ 851 #define FUNCTION_BOUNDARY 32 852 853 /* Alignment of field after `int : 0' in a structure. */ 854 #define EMPTY_FIELD_BOUNDARY BITS_PER_WORD 855 856 /* No data type wants to be aligned rounder than this. */ 857 #define BIGGEST_ALIGNMENT 32 858 859 /* Define this if move instructions will actually fail to work 860 when given unaligned data. */ 861 #define STRICT_ALIGNMENT 1 862 863 /* (shell-command "rm c-decl.o stor-layout.o") 864 * never define PCC_BITFIELD_TYPE_MATTERS 865 * really cause some alignment problem 866 */ 867 868 #define UNITS_PER_FLOAT ((FLOAT_TYPE_SIZE + BITS_PER_UNIT - 1) / \ 869 BITS_PER_UNIT) 870 871 #define UNITS_PER_DOUBLE ((DOUBLE_TYPE_SIZE + BITS_PER_UNIT - 1) / \ 872 BITS_PER_UNIT) 873 874 875 /* what is the 'type' of size_t */ 876 #define SIZE_TYPE "long unsigned int" 877 878 /* Define this as 1 if `char' should by default be signed; else as 0. */ 879 #define DEFAULT_SIGNED_CHAR 1 880 #define FLOAT_TYPE_SIZE BITS_PER_WORD 881 #define SHORT_TYPE_SIZE 16 882 #define CHAR_TYPE_SIZE 8 883 #define INT_TYPE_SIZE 32 884 #define LONG_TYPE_SIZE 32 885 #define LONG_LONG_TYPE_SIZE 64 886 887 /* Note: Fix this to depend on target switch. -- lev */ 888 889 /* Note: Try to implement double and force long double. -- tonyko 890 * #define __DOUBLES_ARE_FLOATS__ 891 * #define DOUBLE_TYPE_SIZE FLOAT_TYPE_SIZE 892 * #define LONG_DOUBLE_TYPE_SIZE DOUBLE_TYPE_SIZE 893 * #define DOUBLES_ARE_FLOATS 1 894 */ 895 896 #define DOUBLE_TYPE_SIZE 64 897 #define LONG_DOUBLE_TYPE_SIZE 64 898 899 /* `PROMOTE_MODE (M, UNSIGNEDP, TYPE)' 900 A macro to update M and UNSIGNEDP when an object whose type is 901 TYPE and which has the specified mode and signedness is to be 902 stored in a register. This macro is only called when TYPE is a 903 scalar type. 904 905 On most RISC machines, which only have operations that operate on 906 a full register, define this macro to set M to `word_mode' if M is 907 an integer mode narrower than `BITS_PER_WORD'. In most cases, 908 only integer modes should be widened because wider-precision 909 floating-point operations are usually more expensive than their 910 narrower counterparts. 911 912 For most machines, the macro definition does not change UNSIGNEDP. 913 However, some machines, have instructions that preferentially 914 handle either signed or unsigned quantities of certain modes. For 915 example, on the DEC Alpha, 32-bit loads from memory and 32-bit add 916 instructions sign-extend the result to 64 bits. On such machines, 917 set UNSIGNEDP according to which kind of extension is more 918 efficient. 919 920 Do not define this macro if it would never modify M.*/ 921 922 #define BFIN_PROMOTE_MODE_P(MODE) \ 923 (!TARGET_DSP && GET_MODE_CLASS (MODE) == MODE_INT \ 924 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) 925 926 #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \ 927 if (BFIN_PROMOTE_MODE_P(MODE)) \ 928 { \ 929 if (MODE == QImode) \ 930 UNSIGNEDP = 1; \ 931 else if (MODE == HImode) \ 932 UNSIGNEDP = 0; \ 933 (MODE) = SImode; \ 934 } 935 936 /* Describing Relative Costs of Operations */ 937 938 /* Do not put function addr into constant pool */ 939 #define NO_FUNCTION_CSE 1 940 941 /* Specify the machine mode that this machine uses 942 for the index in the tablejump instruction. */ 943 #define CASE_VECTOR_MODE SImode 944 945 #define JUMP_TABLES_IN_TEXT_SECTION flag_pic 946 947 /* Define if operations between registers always perform the operation 948 on the full register even if a narrower mode is specified. 949 #define WORD_REGISTER_OPERATIONS 1 950 */ 951 952 /* Evaluates to true if A and B are mac flags that can be used 953 together in a single multiply insn. That is the case if they are 954 both the same flag not involving M, or if one is a combination of 955 the other with M. */ 956 #define MACFLAGS_MATCH_P(A, B) \ 957 ((A) == (B) \ 958 || ((A) == MACFLAG_NONE && (B) == MACFLAG_M) \ 959 || ((A) == MACFLAG_M && (B) == MACFLAG_NONE) \ 960 || ((A) == MACFLAG_IS && (B) == MACFLAG_IS_M) \ 961 || ((A) == MACFLAG_IS_M && (B) == MACFLAG_IS)) 962 963 /* Switch into a generic section. */ 964 #define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section 965 966 #define PRINT_OPERAND(FILE, RTX, CODE) print_operand (FILE, RTX, CODE) 967 #define PRINT_OPERAND_ADDRESS(FILE, RTX) print_address_operand (FILE, RTX) 968 969 typedef enum sections { 970 CODE_DIR, 971 DATA_DIR, 972 LAST_SECT_NM 973 } SECT_ENUM_T; 974 975 typedef enum directives { 976 LONG_CONST_DIR, 977 SHORT_CONST_DIR, 978 BYTE_CONST_DIR, 979 SPACE_DIR, 980 INIT_DIR, 981 LAST_DIR_NM 982 } DIR_ENUM_T; 983 984 #define IS_ASM_LOGICAL_LINE_SEPARATOR(C, STR) \ 985 ((C) == ';' \ 986 || ((C) == '|' && (STR)[1] == '|')) 987 988 #define TEXT_SECTION_ASM_OP ".text;" 989 #define DATA_SECTION_ASM_OP ".data;" 990 991 #define ASM_APP_ON "" 992 #define ASM_APP_OFF "" 993 994 #define ASM_GLOBALIZE_LABEL1(FILE, NAME) \ 995 do { fputs (".global ", FILE); \ 996 assemble_name (FILE, NAME); \ 997 fputc (';',FILE); \ 998 fputc ('\n',FILE); \ 999 } while (0) 1000 1001 #define ASM_DECLARE_FUNCTION_NAME(FILE,NAME,DECL) \ 1002 do { \ 1003 fputs (".type ", FILE); \ 1004 assemble_name (FILE, NAME); \ 1005 fputs (", STT_FUNC", FILE); \ 1006 fputc (';',FILE); \ 1007 fputc ('\n',FILE); \ 1008 ASM_OUTPUT_LABEL(FILE, NAME); \ 1009 } while (0) 1010 1011 #define ASM_OUTPUT_LABEL(FILE, NAME) \ 1012 do { assemble_name (FILE, NAME); \ 1013 fputs (":\n",FILE); \ 1014 } while (0) 1015 1016 #define ASM_OUTPUT_LABELREF(FILE,NAME) \ 1017 do { fprintf (FILE, "_%s", NAME); \ 1018 } while (0) 1019 1020 #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ 1021 do { char __buf[256]; \ 1022 fprintf (FILE, "\t.dd\t"); \ 1023 ASM_GENERATE_INTERNAL_LABEL (__buf, "L", VALUE); \ 1024 assemble_name (FILE, __buf); \ 1025 fputc (';', FILE); \ 1026 fputc ('\n', FILE); \ 1027 } while (0) 1028 1029 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ 1030 MY_ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) 1031 1032 #define MY_ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) \ 1033 do { \ 1034 char __buf[256]; \ 1035 fprintf (FILE, "\t.dd\t"); \ 1036 ASM_GENERATE_INTERNAL_LABEL (__buf, "L", VALUE); \ 1037 assemble_name (FILE, __buf); \ 1038 fputs (" - ", FILE); \ 1039 ASM_GENERATE_INTERNAL_LABEL (__buf, "L", REL); \ 1040 assemble_name (FILE, __buf); \ 1041 fputc (';', FILE); \ 1042 fputc ('\n', FILE); \ 1043 } while (0) 1044 1045 #define ASM_OUTPUT_ALIGN(FILE,LOG) \ 1046 do { \ 1047 if ((LOG) != 0) \ 1048 fprintf (FILE, "\t.align %d\n", 1 << (LOG)); \ 1049 } while (0) 1050 1051 #define ASM_OUTPUT_SKIP(FILE,SIZE) \ 1052 do { \ 1053 asm_output_skip (FILE, SIZE); \ 1054 } while (0) 1055 1056 #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \ 1057 do { \ 1058 switch_to_section (data_section); \ 1059 if ((SIZE) >= (unsigned int) 4 ) ASM_OUTPUT_ALIGN(FILE,2); \ 1060 ASM_OUTPUT_SIZE_DIRECTIVE (FILE, NAME, SIZE); \ 1061 ASM_OUTPUT_LABEL (FILE, NAME); \ 1062 fprintf (FILE, "%s %ld;\n", ASM_SPACE, \ 1063 (ROUNDED) > (unsigned int) 1 ? (ROUNDED) : 1); \ 1064 } while (0) 1065 1066 #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \ 1067 do { \ 1068 ASM_GLOBALIZE_LABEL1(FILE,NAME); \ 1069 ASM_OUTPUT_LOCAL (FILE, NAME, SIZE, ROUNDED); } while(0) 1070 1071 #define ASM_COMMENT_START "//" 1072 1073 #define PROFILE_BEFORE_PROLOGUE 1074 #define FUNCTION_PROFILER(FILE, LABELNO) \ 1075 do { \ 1076 fprintf (FILE, "\t[--SP] = RETS;\n"); \ 1077 if (TARGET_LONG_CALLS) \ 1078 { \ 1079 fprintf (FILE, "\tP2.h = __mcount;\n"); \ 1080 fprintf (FILE, "\tP2.l = __mcount;\n"); \ 1081 fprintf (FILE, "\tCALL (P2);\n"); \ 1082 } \ 1083 else \ 1084 fprintf (FILE, "\tCALL __mcount;\n"); \ 1085 fprintf (FILE, "\tRETS = [SP++];\n"); \ 1086 } while(0) 1087 1088 #undef NO_PROFILE_COUNTERS 1089 #define NO_PROFILE_COUNTERS 1 1090 1091 #define ASM_OUTPUT_REG_PUSH(FILE, REGNO) fprintf (FILE, "\t[--SP] = %s;\n", reg_names[REGNO]) 1092 #define ASM_OUTPUT_REG_POP(FILE, REGNO) fprintf (FILE, "\t%s = [SP++];\n", reg_names[REGNO]) 1093 1094 extern rtx bfin_cc_rtx, bfin_rets_rtx; 1095 1096 /* This works for GAS and some other assemblers. */ 1097 #define SET_ASM_OP ".set " 1098 1099 /* DBX register number for a given compiler register number */ 1100 #define DBX_REGISTER_NUMBER(REGNO) (REGNO) 1101 1102 #define SIZE_ASM_OP "\t.size\t" 1103 1104 extern int splitting_for_sched, splitting_loops; 1105 1106 #define PRINT_OPERAND_PUNCT_VALID_P(CHAR) ((CHAR) == '!') 1107 1108 #ifndef TARGET_SUPPORTS_SYNC_CALLS 1109 #define TARGET_SUPPORTS_SYNC_CALLS 0 1110 #endif 1111 1112 struct bfin_cpu 1113 { 1114 const char *name; 1115 bfin_cpu_t type; 1116 int si_revision; 1117 unsigned int workarounds; 1118 }; 1119 1120 extern const struct bfin_cpu bfin_cpus[]; 1121 1122 #endif /* _BFIN_CONFIG */ 1123