1------------------------------------------------------------------------------ 2-- -- 3-- GNAT COMPILER COMPONENTS -- 4-- -- 5-- P R J . C O N F -- 6-- -- 7-- S p e c -- 8-- -- 9-- Copyright (C) 2006-2014, Free Software Foundation, Inc. -- 10-- -- 11-- GNAT is free software; you can redistribute it and/or modify it under -- 12-- terms of the GNU General Public License as published by the Free Soft- -- 13-- ware Foundation; either version 3, or (at your option) any later ver- -- 14-- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- 15-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- 16-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- 17-- for more details. You should have received a copy of the GNU General -- 18-- Public License distributed with GNAT; see file COPYING3. If not, go to -- 19-- http://www.gnu.org/licenses for a complete copy of the license. -- 20-- -- 21-- GNAT was originally developed by the GNAT team at New York University. -- 22-- Extensive contributions were provided by Ada Core Technologies Inc. -- 23-- -- 24------------------------------------------------------------------------------ 25 26-- The following package manipulates the configuration files 27 28with Prj.Tree; 29with Prj.Proc; 30 31package Prj.Conf is 32 33 type Config_File_Hook is access procedure 34 (Config_File : in out Prj.Tree.Project_Node_Id; 35 Project_Node_Tree : Prj.Tree.Project_Node_Tree_Ref); 36 -- Hook called after the config file has been parsed. This lets the 37 -- application do last minute changes to it (GPS uses this to add the 38 -- default naming schemes for instance). At that point, the config file 39 -- has not been applied to the project yet. When no config file was found, 40 -- and automatic generation is disabled, it is possible that Config_File 41 -- is set to Empty_Node when this procedure is called. You can then decide 42 -- to create a new config file if you need. 43 44 No_Configuration_File : constant String := "/"; 45 -- When specified as a parameter Config_File_Name in the procedures below, 46 -- no existing configuration project file is parsed. This is used by 47 -- gnatmake, gnatclean and the GNAT driver to avoid parsing an existing 48 -- default configuration project file. 49 50 procedure Parse_Project_And_Apply_Config 51 (Main_Project : out Prj.Project_Id; 52 User_Project_Node : out Prj.Tree.Project_Node_Id; 53 Config_File_Name : String := ""; 54 Autoconf_Specified : Boolean; 55 Project_File_Name : String; 56 Project_Tree : Prj.Project_Tree_Ref; 57 Project_Node_Tree : Prj.Tree.Project_Node_Tree_Ref; 58 Env : in out Prj.Tree.Environment; 59 Packages_To_Check : String_List_Access; 60 Allow_Automatic_Generation : Boolean := True; 61 Automatically_Generated : out Boolean; 62 Config_File_Path : out String_Access; 63 Target_Name : String := ""; 64 Normalized_Hostname : String; 65 On_Load_Config : Config_File_Hook := null; 66 Implicit_Project : Boolean := False; 67 On_New_Tree_Loaded : Prj.Proc.Tree_Loaded_Callback := null); 68 -- Find the main configuration project and parse the project tree rooted at 69 -- this configuration project. 70 -- 71 -- Project_Node_Tree must have been initialized first (and possibly the 72 -- value for external references and project path should also have been 73 -- set). 74 -- 75 -- If the processing fails, Main_Project is set to No_Project. If the error 76 -- happened while parsing the project itself (i.e. creating the tree), 77 -- User_Project_Node is also set to Empty_Node. 78 -- 79 -- If Config_File_Name is No_Configuration_File, then no configuration 80 -- project file is parsed. Normally, in this case On_Load_Config is not 81 -- null, and it is used to create a configuration project file in memory. 82 -- 83 -- Autoconf_Specified indicates whether the user has specified --autoconf. 84 -- If this is the case, the config file might be (re)generated, as 85 -- appropriate, to match languages and target if the one specified doesn't 86 -- already match. 87 -- 88 -- Normalized_Hostname is the host on which gprbuild is returned, 89 -- normalized so that we can more easily compare it with what is stored in 90 -- configuration files. It is used when the target is unspecified, although 91 -- we need to know the target specified by the user (Target_Name) when 92 -- computing the name of the default config file that should be used. 93 -- 94 -- If specified, On_Load_Config is called just after the config file has 95 -- been created/loaded. You can then modify it before it is later applied 96 -- to the project itself. 97 -- 98 -- Any error in generating or parsing the config file is reported via the 99 -- Invalid_Config exception, with an appropriate message. Any error while 100 -- parsing the project file results in No_Project. 101 -- 102 -- If Implicit_Project is True, the main project file being parsed is 103 -- deemed to be in the current working directory, even if it is not the 104 -- case. Implicit_Project is set to True when a tool such as gprbuild is 105 -- invoked without a project file and is using an implicit project file 106 -- that is virtually in the current working directory, but is physically 107 -- in another directory. 108 -- 109 -- If specified, On_New_Tree_Loaded is called after each aggregated project 110 -- has been processed succesfully. 111 112 procedure Process_Project_And_Apply_Config 113 (Main_Project : out Prj.Project_Id; 114 User_Project_Node : Prj.Tree.Project_Node_Id; 115 Config_File_Name : String := ""; 116 Autoconf_Specified : Boolean; 117 Project_Tree : Prj.Project_Tree_Ref; 118 Project_Node_Tree : Prj.Tree.Project_Node_Tree_Ref; 119 Env : in out Prj.Tree.Environment; 120 Packages_To_Check : String_List_Access; 121 Allow_Automatic_Generation : Boolean := True; 122 Automatically_Generated : out Boolean; 123 Config_File_Path : out String_Access; 124 Target_Name : String := ""; 125 Normalized_Hostname : String; 126 On_Load_Config : Config_File_Hook := null; 127 Reset_Tree : Boolean := True; 128 On_New_Tree_Loaded : Prj.Proc.Tree_Loaded_Callback := null; 129 Do_Phase_1 : Boolean := True); 130 -- Same as above, except the project must already have been parsed through 131 -- Prj.Part.Parse, and only the processing of the project and the 132 -- configuration is done at this level. 133 -- 134 -- If Reset_Tree is true, all projects are first removed from the tree. 135 -- When_No_Sources indicates what should be done when no sources are found 136 -- for one of the languages of the project. 137 -- 138 -- If Require_Sources_Other_Lang is true, then all languages must have at 139 -- least one source file, or an error is reported via When_No_Sources. If 140 -- it is false, this is only required for Ada (and only if it is a language 141 -- of the project). 142 -- 143 -- If Do_Phase_1 is False, then Prj.Proc.Process_Project_Tree_Phase_1 144 -- should not be called, as it has already been invoked successfully. 145 146 Invalid_Config : exception; 147 148 procedure Get_Or_Create_Configuration_File 149 (Project : Prj.Project_Id; 150 Conf_Project : Project_Id; 151 Project_Tree : Prj.Project_Tree_Ref; 152 Project_Node_Tree : Prj.Tree.Project_Node_Tree_Ref; 153 Env : in out Prj.Tree.Environment; 154 Allow_Automatic_Generation : Boolean; 155 Config_File_Name : String := ""; 156 Autoconf_Specified : Boolean; 157 Target_Name : String := ""; 158 Normalized_Hostname : String; 159 Packages_To_Check : String_List_Access := null; 160 Config : out Prj.Project_Id; 161 Config_File_Path : out String_Access; 162 Automatically_Generated : out Boolean; 163 On_Load_Config : Config_File_Hook := null); 164 -- Compute the name of the configuration file that should be used. If no 165 -- default configuration file is found, a new one will be automatically 166 -- generated if Allow_Automatic_Generation is true. This configuration 167 -- project file will be generated in the object directory of project 168 -- Conf_Project. 169 -- 170 -- Any error in generating or parsing the config file is reported via the 171 -- Invalid_Config exception, with an appropriate message. 172 -- 173 -- On exit, Configuration_Project_Path is never null (if none could be 174 -- found, Os.Fail was called and the program exited anyway). 175 -- 176 -- The choice and generation of a configuration file depends on several 177 -- attributes of the user's project file (given by the Project argument), 178 -- e.g. list of languages that must be supported. Project must therefore 179 -- have been partially processed (phase one of the processing only). 180 -- 181 -- Config_File_Name should be set to the name of the config file specified 182 -- by the user (either through gprbuild's --config or --autoconf switches). 183 -- In the latter case, Autoconf_Specified should be set to true to indicate 184 -- that the configuration file can be regenerated to match target and 185 -- languages. This name can either be an absolute path, or the base name 186 -- that will be searched in the default config file directories (which 187 -- depends on the installation path for the tools). 188 -- 189 -- Target_Name is used to chose the configuration file that will be used 190 -- from among several possibilities. 191 -- 192 -- If a project file could be found, it is automatically parsed and 193 -- processed (and Packages_To_Check is used to indicate which packages 194 -- should be processed). 195 196 procedure Add_Default_GNAT_Naming_Scheme 197 (Config_File : in out Prj.Tree.Project_Node_Id; 198 Project_Tree : Prj.Tree.Project_Node_Tree_Ref); 199 -- A hook that will create a new config file (in memory), used for 200 -- Get_Or_Create_Configuration_File and Process_Project_And_Apply_Config 201 -- and add the default GNAT naming scheme to it. Nothing is done if the 202 -- config_file already exists, to avoid overriding what the user might 203 -- have put in there. 204 205 -------------- 206 -- Runtimes -- 207 -------------- 208 209 procedure Set_Runtime_For (Language : Name_Id; RTS_Name : String); 210 -- Specifies the runtime to use for a specific language. Most of the time 211 -- this should be used for Ada, but other languages can also specify their 212 -- own runtime. This is in general specified via the --RTS command line 213 -- switch, and results in a specific component passed to gprconfig's 214 -- --config switch then automatically generating a configuration file. 215 216 function Runtime_Name_For (Language : Name_Id) return String; 217 -- Returns the runtime name for a language. Returns an empty string if no 218 -- runtime was specified for the language using option --RTS. 219 220 function Runtime_Name_Set_For (Language : Name_Id) return Boolean; 221 -- Returns True only if Set_Runtime_For has been called for the Language 222 223end Prj.Conf; 224