1 /* m68hc11.h -- Header file for Motorola 68HC11 & 68HC12 opcode table
2    Copyright (C) 1999-2016 Free Software Foundation, Inc.
3    Written by Stephane Carrez (stcarrez@nerim.fr)
4 
5    This file is part of GDB, GAS, and the GNU binutils.
6 
7    GDB, GAS, and the GNU binutils are free software; you can redistribute
8    them and/or modify them under the terms of the GNU General Public
9    License as published by the Free Software Foundation; either version 3,
10    or (at your option) any later version.
11 
12    GDB, GAS, and the GNU binutils are distributed in the hope that they
13    will be useful, but WITHOUT ANY WARRANTY; without even the implied
14    warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
15    the GNU General Public License for more details.
16 
17    You should have received a copy of the GNU General Public License
18    along with this file; see the file COPYING3.  If not, write to the Free
19    Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
20    MA 02110-1301, USA.  */
21 
22 #ifndef _OPCODE_M68HC11_H
23 #define _OPCODE_M68HC11_H
24 
25 /* Flags for the definition of the 68HC11 & 68HC12 CCR.  */
26 #define M6811_S_BIT     0x80	/* Stop disable */
27 #define M6811_X_BIT     0x40	/* X-interrupt mask */
28 #define M6811_H_BIT     0x20	/* Half carry flag */
29 #define M6811_I_BIT     0x10	/* I-interrupt mask */
30 #define M6811_N_BIT     0x08	/* Negative */
31 #define M6811_Z_BIT     0x04	/* Zero */
32 #define M6811_V_BIT     0x02	/* Overflow */
33 #define M6811_C_BIT     0x01	/* Carry */
34 
35 /* 68HC11 register address offsets (range 0..0x3F or 0..64).
36    The absolute address of the I/O register depends on the setting
37    of the M6811_INIT register.  At init time, the I/O registers are
38    mapped at 0x1000.  Address of registers is then:
39 
40    0x1000 + M6811_xxx.  */
41 #define M6811_PORTA     0x00	/* Port A register */
42 #define M6811__RES1	0x01	/* Unused/Reserved */
43 #define M6811_PIOC	0x02	/* Parallel I/O Control register */
44 #define M6811_PORTC	0x03	/* Port C register */
45 #define M6811_PORTB	0x04	/* Port B register */
46 #define M6811_PORTCL	0x05	/* Alternate latched port C */
47 #define M6811__RES6	0x06	/* Unused/Reserved */
48 #define M6811_DDRC	0x07	/* Data direction register for port C */
49 #define M6811_PORTD	0x08	/* Port D register */
50 #define M6811_DDRD	0x09	/* Data direction register for port D */
51 #define M6811_PORTE	0x0A	/* Port E input register */
52 #define M6811_CFORC	0x0B	/* Compare Force Register */
53 #define M6811_OC1M	0x0C	/* OC1 Action Mask register */
54 #define M6811_OC1D	0x0D	/* OC1 Action Data register */
55 #define M6811_TCTN	0x0E	/* Timer Counter Register */
56 #define M6811_TCTN_H	0x0E	/* "	 "	 " High part */
57 #define M6811_TCTN_L	0x0F	/* "	 "	 " Low part */
58 #define M6811_TIC1	0x10	/* Input capture 1 register */
59 #define M6811_TIC1_H	0x10	/* "	 "	 " High part */
60 #define M6811_TIC1_L	0x11	/* "	 "	 " Low part */
61 #define M6811_TIC2	0x12	/* Input capture 2 register */
62 #define M6811_TIC2_H	0x12	/* "	 "	 " High part */
63 #define M6811_TIC2_L	0x13	/* "	 "	 " Low part */
64 #define M6811_TIC3	0x14	/* Input capture 3 register */
65 #define M6811_TIC3_H	0x14	/* "	 "	 " High part */
66 #define M6811_TIC3_L	0x15	/* "	 "	 " Low part */
67 #define M6811_TOC1	0x16	/* Output Compare 1 register */
68 #define M6811_TOC1_H	0x16	/* "	 "	 " High part */
69 #define M6811_TOC1_L	0x17	/* "	 "	 " Low part */
70 #define M6811_TOC2	0x18	/* Output Compare 2 register */
71 #define M6811_TOC2_H	0x18	/* "	 "	 " High part */
72 #define M6811_TOC2_L	0x19	/* "	 "	 " Low part */
73 #define M6811_TOC3	0x1A	/* Output Compare 3 register */
74 #define M6811_TOC3_H	0x1A	/* "	 "	 " High part */
75 #define M6811_TOC3_L	0x1B	/* "	 "	 " Low part */
76 #define M6811_TOC4	0x1C	/* Output Compare 4 register */
77 #define M6811_TOC4_H	0x1C	/* "	 "	 " High part */
78 #define M6811_TOC4_L	0x1D	/* "	 "	 " Low part */
79 #define M6811_TOC5	0x1E	/* Output Compare 5 register */
80 #define M6811_TOC5_H	0x1E	/* "	 "	 " High part */
81 #define M6811_TOC5_L	0x1F	/* "	 "	 " Low part */
82 #define M6811_TCTL1	0x20	/* Timer Control register 1 */
83 #define M6811_TCTL2	0x21	/* Timer Control register 2 */
84 #define M6811_TMSK1	0x22	/* Timer Interrupt Mask Register 1 */
85 #define M6811_TFLG1	0x23	/* Timer Interrupt Flag Register 1 */
86 #define M6811_TMSK2	0x24	/* Timer Interrupt Mask Register 2 */
87 #define M6811_TFLG2	0x25	/* Timer Interrupt Flag Register 2 */
88 #define M6811_PACTL	0x26	/* Pulse Accumulator Control Register */
89 #define M6811_PACNT	0x27	/* Pulse Accumulator Count Register */
90 #define M6811_SPCR	0x28	/* SPI Control register */
91 #define M6811_SPSR	0x29	/* SPI Status register */
92 #define M6811_SPDR	0x2A	/* SPI Data register */
93 #define M6811_BAUD	0x2B	/* SCI Baud register */
94 #define M6811_SCCR1	0x2C	/* SCI Control register 1 */
95 #define M6811_SCCR2	0x2D	/* SCI Control register 2 */
96 #define M6811_SCSR	0x2E	/* SCI Status register */
97 #define M6811_SCDR	0x2F	/* SCI Data (Read => RDR, Write => TDR) */
98 #define M6811_ADCTL	0x30	/* A/D Control register */
99 #define M6811_ADR1	0x31	/* A/D, Analog Result register 1 */
100 #define M6811_ADR2	0x32	/* A/D, Analog Result register 2 */
101 #define M6811_ADR3	0x33	/* A/D, Analog Result register 3 */
102 #define M6811_ADR4	0x34	/* A/D, Analog Result register 4 */
103 #define M6811__RES35	0x35
104 #define M6811__RES36	0x36
105 #define M6811__RES37	0x37
106 #define M6811__RES38	0x38
107 #define M6811_OPTION	0x39	/* System Configuration Options */
108 #define M6811_COPRST	0x3A	/* Arm/Reset COP Timer Circuitry */
109 #define M6811_PPROG	0x3B	/* EEPROM Programming Control Register */
110 #define M6811_HPRIO	0x3C	/* Highest priority I-Bit int and misc */
111 #define M6811_INIT	0x3D	/* Ram and I/O mapping register */
112 #define M6811_TEST1	0x3E	/* Factory test control register */
113 #define M6811_CONFIG	0x3F	/* COP, ROM and EEPROM enables */
114 
115 
116 /* Flags of the CONFIG register (in EEPROM).  */
117 #define M6811_NOSEC     0x08    /* Security mode disable */
118 #define M6811_NOCOP     0x04    /* COP system disable */
119 #define M6811_ROMON     0x02    /* Enable on-chip rom */
120 #define M6811_EEON      0x01    /* Enable on-chip eeprom */
121 
122 /* Flags of the PPROG register.  */
123 #define M6811_BYTE	0x10	/* Byte mode */
124 #define M6811_ROW       0x08	/* Row mode */
125 #define M6811_ERASE	0x04	/* Erase mode select (1 = erase, 0 = read) */
126 #define M6811_EELAT     0x02	/* EEPROM Latch Control */
127 #define M6811_EEPGM     0x01	/* EEPROM Programming Voltage Enable */
128 
129 /* Flags of the PIOC register.  */
130 #define M6811_STAF	0x80	/* Strobe A Interrupt Status Flag */
131 #define M6811_STAI	0x40	/* Strobe A Interrupt Enable Mask */
132 #define M6811_CWOM	0x20	/* Port C Wire OR mode */
133 #define M6811_HNDS	0x10	/* Handshake mode */
134 #define M6811_OIN	0x08	/* Output or Input handshaking */
135 #define M6811_PLS	0x04	/* Pulse/Interlocked Handshake Operation */
136 #define M6811_EGA	0x02	/* Active Edge for Strobe A */
137 #define M6811_INVB	0x01	/* Invert Strobe B */
138 
139 /* Flags of the SCCR1 register.  */
140 #define M6811_R8	0x80	/* Receive Data bit 8 */
141 #define M6811_T8	0x40	/* Transmit data bit 8 */
142 #define M6811__SCCR1_5  0x20	/* Unused */
143 #define M6811_M		0x10	/* SCI Character length */
144 #define M6811_WAKE	0x08	/* Wake up method select (0=idle, 1=addr mark) */
145 
146 /* Flags of the SCCR2 register.  */
147 #define M6811_TIE	0x80	/* Transmit Interrupt enable */
148 #define M6811_TCIE	0x40	/* Transmit Complete Interrupt Enable */
149 #define M6811_RIE	0x20	/* Receive Interrupt Enable */
150 #define M6811_ILIE	0x10	/* Idle Line Interrupt Enable */
151 #define M6811_TE	0x08	/* Transmit Enable */
152 #define M6811_RE	0x04	/* Receive Enable */
153 #define M6811_RWU	0x02	/* Receiver Wake Up */
154 #define M6811_SBK	0x01	/* Send Break */
155 
156 /* Flags of the SCSR register.  */
157 #define M6811_TDRE	0x80	/* Transmit Data Register Empty */
158 #define M6811_TC	0x40	/* Transmit Complete */
159 #define M6811_RDRF	0x20	/* Receive Data Register Full */
160 #define M6811_IDLE	0x10	/* Idle Line Detect */
161 #define M6811_OR	0x08	/* Overrun Error */
162 #define M6811_NF	0x04	/* Noise Flag */
163 #define M6811_FE	0x02	/* Framing Error */
164 #define M6811__SCSR_0	0x01	/* Unused */
165 
166 /* Flags of the BAUD register.  */
167 #define M6811_TCLR	0x80	/* Clear Baud Rate (TEST mode) */
168 #define M6811__BAUD_6	0x40	/* Not used */
169 #define M6811_SCP1	0x20	/* SCI Baud rate prescaler select */
170 #define M6811_SCP0	0x10
171 #define M6811_RCKB	0x08	/* Baud Rate Clock Check (TEST mode) */
172 #define M6811_SCR2	0x04	/* SCI Baud rate select */
173 #define M6811_SCR1	0x02
174 #define M6811_SCR0	0x01
175 
176 #define M6811_BAUD_DIV_1	(0)
177 #define M6811_BAUD_DIV_3	(M6811_SCP0)
178 #define M6811_BAUD_DIV_4	(M6811_SCP1)
179 #define M6811_BAUD_DIV_13	(M6811_SCP1|M6811_SCP0)
180 
181 /* Flags of the SPCR register.  */
182 #define M6811_SPIE	0x80	/* Serial Peripheral Interrupt Enable */
183 #define M6811_SPE	0x40	/* Serial Peripheral System Enable */
184 #define M6811_DWOM	0x20	/* Port D Wire-OR mode option */
185 #define M6811_MSTR	0x10	/* Master Mode Select */
186 #define M6811_CPOL	0x08	/* Clock Polarity */
187 #define M6811_CPHA	0x04	/* Clock Phase */
188 #define M6811_SPR1	0x02	/* SPI Clock Rate Select */
189 #define M6811_SPR0	0x01
190 
191 /* Flags of the SPSR register.  */
192 #define M6811_SPIF	0x80	/* SPI Transfer Complete flag */
193 #define M6811_WCOL	0x40	/* Write Collision */
194 #define M6811_MODF	0x10	/* Mode Fault */
195 
196 /* Flags of the ADCTL register.  */
197 #define M6811_CCF	0x80	/* Conversions Complete Flag */
198 #define M6811_SCAN	0x20	/* Continuous Scan Control */
199 #define M6811_MULT	0x10	/* Multiple Channel/Single Channel Control */
200 #define M6811_CD	0x08	/* Channel Select D */
201 #define M6811_CC	0x04	/*                C */
202 #define M6811_CB	0x02	/*                B */
203 #define M6811_CA	0x01	/*                A */
204 
205 /* Flags of the CFORC register.  */
206 #define M6811_FOC1	0x80	/* Force Output Compare 1 */
207 #define M6811_FOC2	0x40	/*			2 */
208 #define M6811_FOC3	0x20	/*			3 */
209 #define M6811_FOC4	0x10	/*			4 */
210 #define M6811_FOC5	0x08	/*			5 */
211 
212 /* Flags of the OC1M register.  */
213 #define M6811_OC1M7	0x80	/* Output Compare 7 */
214 #define M6811_OC1M6	0x40	/*                6 */
215 #define M6811_OC1M5	0x20	/*                5 */
216 #define M6811_OC1M4	0x10	/*                4 */
217 #define M6811_OC1M3	0x08	/*                3 */
218 
219 /* Flags of the OC1D register.  */
220 #define M6811_OC1D7	0x80
221 #define M6811_OC1D6	0x40
222 #define M6811_OC1D5	0x20
223 #define M6811_OC1D4	0x10
224 #define M6811_OC1D3	0x08
225 
226 /* Flags of the TCTL1 register.  */
227 #define M6811_OM2	0x80	/* Output Mode 2 */
228 #define M6811_OL2	0x40	/* Output Level 2 */
229 #define M6811_OM3	0x20
230 #define M6811_OL3	0x10
231 #define M6811_OM4	0x08
232 #define M6811_OL4	0x04
233 #define M6811_OM5	0x02
234 #define M6811_OL5	0x01
235 
236 /* Flags of the TCTL2 register.  */
237 #define M6811_EDG1B	0x20	/* Input Edge Capture Control 1 */
238 #define M6811_EDG1A	0x10
239 #define M6811_EDG2B	0x08	/* Input 2 */
240 #define M6811_EDG2A	0x04
241 #define M6811_EDG3B	0x02	/* Input 3 */
242 #define M6811_EDG3A	0x01
243 
244 /* Flags of the TMSK1 register.  */
245 #define M6811_OC1I	0x80	/* Output Compare 1 Interrupt */
246 #define M6811_OC2I	0x40	/*		  2	      */
247 #define M6811_OC3I	0x20	/*		  3	      */
248 #define M6811_OC4I	0x10	/*		  4	      */
249 #define M6811_OC5I	0x08	/*		  5	      */
250 #define M6811_IC1I	0x04	/* Input Capture  1 Interrupt */
251 #define M6811_IC2I	0x02	/*		  2	      */
252 #define M6811_IC3I	0x01	/*		  3	      */
253 
254 /* Flags of the TFLG1 register.  */
255 #define M6811_OC1F	0x80	/* Output Compare 1 Flag */
256 #define M6811_OC2F	0x40	/*		  2	 */
257 #define M6811_OC3F	0x20	/*		  3	 */
258 #define M6811_OC4F	0x10	/*		  4	 */
259 #define M6811_OC5F	0x08	/*		  5	 */
260 #define M6811_IC1F	0x04	/* Input Capture  1 Flag */
261 #define M6811_IC2F	0x02	/*		  2	 */
262 #define M6811_IC3F	0x01	/*		  3	 */
263 
264 /* Flags of Timer Interrupt Mask Register 2 (TMSK2).  */
265 #define M6811_TOI       0x80    /* Timer Overflow Interrupt Enable */
266 #define M6811_RTII      0x40    /* RTI Interrupt Enable */
267 #define M6811_PAOVI     0x20    /* Pulse Accumulator Overflow Interrupt En. */
268 #define M6811_PAII      0x10    /* Pulse Accumulator Interrupt Enable */
269 #define M6811_PR1       0x02    /* Timer prescaler */
270 #define M6811_PR0       0x01    /* Timer prescaler */
271 #define M6811_TPR_1     0x00    /* " " prescale div 1 */
272 #define M6811_TPR_4     0x01    /* " " prescale div 4 */
273 #define M6811_TPR_8     0x02    /* " " prescale div 8 */
274 #define M6811_TPR_16    0x03    /* " " prescale div 16 */
275 
276 /* Flags of Timer Interrupt Flag Register 2 (M6811_TFLG2).  */
277 #define M6811_TOF       0x80    /* Timer overflow bit */
278 #define M6811_RTIF      0x40    /* Read time interrupt flag */
279 #define M6811_PAOVF     0x20    /* Pulse accumulator overflow Interrupt flag */
280 #define M6811_PAIF      0x10    /* Pulse accumulator Input Edge " " " */
281 
282 /* Flags of Pulse Accumulator Control Register (PACTL).  */
283 #define M6811_DDRA7     0x80    /* Data direction for port A bit 7 */
284 #define M6811_PAEN      0x40    /* Pulse accumulator system enable */
285 #define M6811_PAMOD     0x20    /* Pulse accumulator mode */
286 #define M6811_PEDGE     0x10    /* Pulse accumulator edge control */
287 #define M6811_RTR1      0x02    /* RTI Interrupt rates select */
288 #define M6811_RTR0      0x01    /* " " " " */
289 
290 /* Flags of the Options register.  */
291 #define M6811_ADPU      0x80    /* A/D Powerup */
292 #define M6811_CSEL      0x40    /* A/D/EE Charge pump clock source select */
293 #define M6811_IRQE      0x20    /* IRQ Edge/Level sensitive */
294 #define M6811_DLY       0x10    /* Stop exit turn on delay */
295 #define M6811_CME       0x08    /* Clock Monitor enable */
296 #define M6811_CR1       0x02    /* COP timer rate select */
297 #define M6811_CR0       0x01    /* COP timer rate select */
298 
299 /* Flags of the HPRIO register.  */
300 #define M6811_RBOOT	0x80	/* Read Bootstrap ROM */
301 #define M6811_SMOD	0x40	/* Special Mode */
302 #define M6811_MDA	0x20	/* Mode Select A */
303 #define M6811_IRV	0x10	/* Internal Read Visibility */
304 #define M6811_PSEL3	0x08	/* Priority Select */
305 #define M6811_PSEL2	0x04
306 #define M6811_PSEL1	0x02
307 #define M6811_PSEL0	0x01
308 
309 /* Some insns used by gas to turn relative branches into absolute ones.  */
310 #define M6811_BRA	0x20
311 #define M6811_JMP	0x7e
312 #define M6811_BSR	0x8d
313 #define M6811_JSR	0xbd
314 #define M6812_JMP       0x06
315 #define M6812_BSR       0x07
316 #define M6812_JSR       0x16
317 
318 /* Instruction code pages. Code page 1 is the default.  */
319 /*#define	M6811_OPCODE_PAGE1	0x00*/
320 #define	M6811_OPCODE_PAGE2	0x18
321 #define	M6811_OPCODE_PAGE3	0x1A
322 #define	M6811_OPCODE_PAGE4	0xCD
323 
324 
325 /* 68HC11 operands formats as stored in the m6811_opcode table.  These
326    flags do not correspond to anything in the 68HC11 or 68HC12.
327    They are only used by GAS to recognize operands.  */
328 #define M6811_OP_NONE         0        /* No operand */
329 #define M6811_OP_DIRECT       0x0001   /* Page 0 addressing:   *<val-8bits>  */
330 #define M6811_OP_IMM8         0x0002   /*  8 bits immediat:    #<val-8bits>  */
331 #define M6811_OP_IMM16        0x0004   /* 16 bits immediat:    #<val-16bits> */
332 #define M6811_OP_IND16        0x0008   /* Indirect abs:        <val-16>      */
333 #define M6812_OP_IND16_P2     0x0010   /* Second parameter indirect abs.     */
334 #define M6812_OP_REG          0x0020   /* Register operand 1                 */
335 #define M6812_OP_REG_2        0x0040   /* Register operand 2                 */
336 
337 #define M6811_OP_IX           0x0080   /* Indirect IX:         <val-8>,x     */
338 #define M6811_OP_IY           0x0100   /* Indirect IY:         <val-8>,y     */
339 #define M6812_OP_IDX          0x0200   /* Indirect: N,r N,[+-]r[+-] N:5-bits */
340 #define M6812_OP_IDX_1        0x0400   /* N,r N:9-bits  */
341 #define M6812_OP_IDX_2        0x0800   /* N,r N:16-bits */
342 #define M6812_OP_D_IDX        0x1000   /* Indirect indexed: [D,r] */
343 #define M6812_OP_D_IDX_2      0x2000   /* [N,r] N:16-bits */
344 #define M6812_OP_PAGE         0x4000   /* Page number */
345 #define M6811_OP_MASK         0x07FFF
346 #define M6811_OP_BRANCH       0x00008000 /* Branch, jsr, call */
347 #define M6811_OP_BITMASK      0x00010000 /* Bitmask:             #<val-8>    */
348 #define M6811_OP_JUMP_REL     0x00020000 /* Pc-Relative:         <val-8>     */
349 #define M6812_OP_JUMP_REL16   0x00040000 /* Pc-relative:         <val-16>    */
350 #define M6811_OP_PAGE1        0x0000
351 #define M6811_OP_PAGE2        0x00080000 /* Need a page2 opcode before       */
352 #define M6811_OP_PAGE3        0x00100000 /* Need a page3 opcode before       */
353 #define M6811_OP_PAGE4        0x00200000 /* Need a page4 opcode before       */
354 #define M6811_MAX_OPERANDS    3     /* Max operands: brset <dst> <mask> <b> */
355 
356 #define M6812_ACC_OFFSET      0x00400000 /* A,r B,r D,r			    */
357 #define M6812_ACC_IND         0x00800000 /* [D,r]			    */
358 #define M6812_PRE_INC         0x01000000 /* n,+r   n = -8..8		    */
359 #define M6812_PRE_DEC         0x02000000 /* n,-r			    */
360 #define M6812_POST_INC        0x04000000 /* n,r+			    */
361 #define M6812_POST_DEC        0x08000000 /* n,r-			    */
362 #define M6812_INDEXED_IND     0x10000000 /* [n,r]  n = 16-bits		    */
363 #define M6812_INDEXED         0x20000000 /* n,r    n = 5, 9 or 16-bits	    */
364 #define M6812_OP_IDX_P2       0x40000000
365 
366 /* XGATE defines.
367    These overlap with HC11/12 as above but not used at the same time.  */
368 #define M68XG_OP_NONE           0x0001
369 #define M68XG_OP_IMM3           0x0002
370 #define M68XG_OP_R              0x0004
371 #define M68XG_OP_R_R            0x0008
372 #define M68XG_OP_R_IMM4         0x0010
373 #define M68XG_OP_R_R_R          0x0020
374 #define M68XG_OP_REL9           0x0040
375 #define M68XG_OP_REL10          0x0080
376 #define M68XG_OP_R_R_OFFS5      0x0100
377 #define M68XG_OP_RD_RB_RI       0x0200
378 #define M68XG_OP_RD_RB_RIp      0x0400
379 #define M68XG_OP_RD_RB_mRI      0x0800
380 #define M68XG_OP_R_IMM8         0x1000
381 #define M68XG_OP_R_IMM16        0x2000
382 #define M68XG_OP_REG            0x4000   /* Register operand 1.  */
383 #define M68XG_OP_REG_2          0x8000   /* Register operand 2.  */
384 #define M68XG_MAX_OPERANDS      3        /* Max operands of triadic r1, r2, r3.  */
385 
386 /* Markers to identify some instructions.  */
387 #define M6812_OP_EXG_MARKER   0x01000000 /* exg r1,r2 */
388 #define M6812_OP_TFR_MARKER   0x02000000 /* tfr r1,r2 */
389 #define M6812_OP_SEX_MARKER   0x04000000 /* sex r1,r2 */
390 
391 #define M6812_OP_EQ_MARKER    0x80000000 /* dbeq/ibeq/tbeq */
392 #define M6812_OP_DBCC_MARKER  0x04000000 /* dbeq/dbne */
393 #define M6812_OP_IBCC_MARKER  0x02000000 /* ibeq/ibne */
394 #define M6812_OP_TBCC_MARKER  0x01000000
395 
396 /* XGATE markers.  */
397 #define M68XG_OP_B_MARKER     0x04000000 /* bXX rel9 */
398 #define M68XG_OP_BRA_MARKER   0x02000000 /* bra rel10 */
399 
400 #define M6812_OP_TRAP_ID      0x80000000 /* trap #N */
401 
402 #define M6811_OP_HIGH_ADDR    0x01000000 /* Used internally by gas.  */
403 #define M6811_OP_LOW_ADDR     0x02000000
404 
405 #define M68HC12_BANK_VIRT       0x010000
406 #define M68HC12_BANK_MASK     0x00003fff
407 #define M68HC12_BANK_BASE     0x00008000
408 #define M68HC12_BANK_SHIFT            14
409 #define M68HC12_BANK_PAGE_MASK     0x0ff
410 
411 
412 /* CPU identification.  */
413 #define cpu6811 0x01
414 #define cpu6812 0x02
415 #define cpu6812s 0x04
416 #define cpu9s12x 0x08  /* 9S12X main cpu.  */
417 #define cpuxgate 0x10  /* The XGATE module itself.  */
418 
419 /* The opcode table is an array of struct m68hc11_opcode.  */
420 struct m68hc11_opcode
421 {
422   const char *   name;     /* Op-code name.  */
423   long           format;
424   unsigned char  size;
425   unsigned int   opcode;
426   unsigned char  cycles_low;
427   unsigned char  cycles_high;
428   unsigned char  set_flags_mask;
429   unsigned char  clr_flags_mask;
430   unsigned char  chg_flags_mask;
431   unsigned char  arch;
432   unsigned int   xg_mask; /* Mask with zero in register place for xgate.  */
433 };
434 
435 /* Alias definition for 68HC12.  */
436 struct m68hc12_opcode_alias
437 {
438   const char*   name;
439   const char*   translation;
440   unsigned char size;
441   unsigned char code1;
442   unsigned char code2;
443 };
444 
445 /* The opcode table.  The table contains all the opcodes (all pages).
446    You can't rely on the order.  */
447 extern const struct m68hc11_opcode m68hc11_opcodes[];
448 extern const int m68hc11_num_opcodes;
449 
450 /* Alias table for 68HC12.  It translates some 68HC11 insn which are not
451    implemented in 68HC12 but have equivalent translations.  */
452 extern const struct m68hc12_opcode_alias m68hc12_alias[];
453 extern const int m68hc12_num_alias;
454 
455 #endif /* _OPCODE_M68HC11_H */
456