12001-12-31  Jeffrey A Law  (law@redhat.com)
2
3	* hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
4	'X', 'M', and 'A'.  No longer emit a space after 'x' or 's'.
5	Always emit a space after 'H'.
6
72001-12-18  matthew green  <mrg@redhat.com>
8
9	* ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
10
112001-12-17  Richard Henderson  <rth@redhat.com>
12
13	* alpha-opc.c (unop): Encode with RB as $sp.
14
152001-12-07  Geoffrey Keating  <geoffk@redhat.com>
16
17	* Makefile.am: Add support for xstormy16.
18	* Makefile.in: Regenerate.
19	* configure.in: Add support for xstormy16.
20	* configure: Regenerate.
21	* disassemble.c: Add support for xstormy16.
22	* xstormy16-asm.c: New generated file.
23	* xstormy16-desc.c: New generated file.
24	* xstormy16-desc.h: New generated file.
25	* xstormy16-dis.c: New generated file.
26	* xstormy16-ibld.c: New generated file.
27	* xstormy16-opc.c: New generated file.
28	* xstormy16-opc.h: New generated file.
29
302001-12-06  Richard Henderson  <rth@redhat.com>
31
32	* alpha-opc.c (alpha_opcodes): Add wh64en.
33
342001-12-04  Alexandre Oliva  <aoliva@redhat.com>
35
36	* d10v-opc.c (d10v_predefined_registers): Remove warnings
37	introduced in Nov 29's patch.
38
39	* d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
40	unmatched register.
41
42	* d10v-dis.c (print_operand): Disregard OPERAND_SP in register
43	predefined value.
44
45	* d10v-opc.c (RSRC_NOSP): New macro.
46	(d10v_operands): Add it.
47	(d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
48
492001-11-29  Alexandre Oliva  <aoliva@redhat.com>
50
51	* d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
52	(RSRC_SP): New macro.
53	(d10v_operands): Add it.
54	(d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
55
562001-11-23  Lars Brinkhoff  <lars@nocrew.org>
57
58	* pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
59	Also, break out of the loop as soon as an instruction has been
60	printed.
61
622001-11-17  matthew green  <mrg@redhat.com>
63
64	* ppc-opc.c (mfvrsave, mtvrsave): New instructions.
65
662001-11-15  Alan Modra  <amodra@bigpond.net.au>
67
68	* po/POTFILES.in: Regenerate.
69
70	* ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
71	(insert_bat, extract_bat, insert_bba, extract_bba,
72	insert_bd, extract_bd, insert_bdm, extract_bdm,
73	insert_bdp, extract_bdp, valid_bo,
74	insert_bo, extract_bo, insert_boe, extract_boe,
75	insert_ds, extract_ds, insert_de, extract_de,
76	insert_des, extract_des, insert_li, extract_li,
77	insert_mbe, extract_mbe, insert_mb6, extract_mb6,
78	insert_nb, extract_nb, insert_nsi, extract_nsi,
79	insert_ral, insert_ram, insert_ras,
80	insert_rbs, extract_rbs, insert_sh6, extract_sh6,
81	insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
82	(extract_bd, extract_bdm, extract_bdp,
83	extract_ds, extract_des,
84	extract_li, extract_nsi): Implement sign extension without conditional.
85	(insert_bdm, extract_bdm,
86	insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
87	(extract_bdm, extract_bdp): Correct 32 bit validation.
88	(AT1_MASK, AT2_MASK): Define.
89	(BBOAT_MASK): Define.
90	(BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
91	(BOFM64, BOFP64, BOTM64, BOTP64): Define.
92	(BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
93	(PPCCOM32, PPCCOM64): Define.
94	(powerpc_opcodes): Modify existing 32 bit insns with branch hints
95	and add new patterns to implement 64 bit branches with hints.  Move
96	booke instructions so they match before ppc64.
97
98	* ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
99	64 bit default targets, and parse "32" and "64" in options.
100	Formatting fixes.
101	(print_insn_powerpc): Pass dialect to operand->extract.
102
1032001-11-14  Dave Brolley  <brolley@redhat.com>
104
105	* cgen-dis.c (count_decodable_bits): New function.
106	(add_insn_to_hash_chain): New function.
107	(hash_insn_array): Call add_insn_to_hash_chain.
108	(hash_insn_list): Call add_insn_to_hash_chain.
109	* m32r-dis.c: Regenerated.
110	* fr30-dis.c: Regenerated.
111
1122001-11-14  Andreas Jaeger  <aj@suse.de>
113
114	* i386-dis.c (print_insn): Use x86-64 as option.
115
1162001-11-14  Alan Modra  <amodra@bigpond.net.au>
117
118	* disassemble.c (disassembler): Call print_insn_i386.
119	* i386-dis.c (SUFFIX_ALWAYS): Define.
120	(struct dis_private): Add orig_sizeflag.
121	(print_insn_i386): Make it a wrapper, calling..
122	(print_insn): ..The old body of print_insn_i386.  Avoid longjmp
123	warning without using volatile by moving orig_sizeflag to priv,
124	and removing inbuf.  Parse disassembler_options.
125	(print_insn_i386_att, print_insn_i386_intel): Move initialisation
126	code to print_insn.
127	(putop): Remove #ifdef SUFFIX_ALWAYS.
128
1292001-11-11  Timothy Wall  <twall@alum.mit.edu>
130
131	* tic54x-dis.c: Use revised opcode structure.  Export opcode
132	template lookup.
133	(has_lkaddr): Don't forget about Lmem insns.
134	* tic54x-opc.c: Add emulation trap.  Parallel table now uses
135	standard opcode templates.
136
1372001-11-13  Zack Weinberg <zack@codesourcery.com>
138
139	* i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
140	to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
141	category instead of Ew.
142
1432001-11-12  Niraj Gupta <ngupta@zumanetworks.com>
144
145	* m68k-opc.c: Fix definitions of wddata[bwl].
146
1472001-11-09  Richard Sandiford  <rsandifo@redhat.com>
148
149	* cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
150	fit in the buffer, try to match the empty keyword.
151
1522001-11-09  Nick Clifton  <nickc@cambridge.redhat.com>
153
154	* cgen-ibld.in (extract_1): Fix badly placed #if 0.
155	* fr30-ibld.c: Regenerate.
156	* m32r-ibld.c: Regenerate.
157	* openrisc-ibld.c: Regenerate.
158
1592001-11-04  Chris Demetriou  <cgd@broadcom.com>
160
161	* mips-dis.c (print_insn_mips): Remove spaces at end of line.
162
1632001-11-02  Nick Clifton  <nickc@cambridge.redhat.com>
164
165	* configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
166	* configure: Regernate.
167	* po/fr.po: New file.
168	* po/sv.po: New file.
169	* po/tr.po: New file.
170
1712001-11-01  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
172
173	* m68hc11-dis.c (print_insn): Fix disassembly of movb with a
174	constant as source.
175
1762001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
177
178	* Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c.  Regenerate
179	dependencies.
180	* Makefile.in: Regenerate.
181	* mmix-dis.c, mmix-opc.c: New files.
182
1832001-10-29  Kazu Hirata  <kazu@hxi.com>
184
185	* d30v-dis.c: Fix a comment typo.
186
1872001-10-23  Chris Demetriou  <cgd@broadcom.com>
188
189	* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
190	"bltzall" as writing GPR 31 (since they do).
191
192	* mips-dis.c (print_insn_arg): Calculate info->target
193	where appropriate.
194	(print_insn_mips): Fill in instruction info.
195	(print_mips16_insn_arg): Remove unneded variable 'val'.
196	Removed duplicated instruction target calculations,
197	calculate once and print that result.  Use same idiom for
198	masking the jump segment bits as is used in print_insn_arg.
199
2002001-10-20  Alan Modra  <amodra@bigpond.net.au>
201
202	* ppc-opc.c (CT): Make it an optional operand.
203
2042001-10-17  Chris Demetriou  <cgd@broadcom.com>
205
206	* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
207	SB-1 binaries include instructions specific to the SB-1.
208	* mips-opc.c (SB1): New definition.
209	(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
210	"recip.ps", "rsqrt.ps", and "sqrt.ps".
211
2122001-10-17  matthew green  <mrg@redhat.com>
213
214	* ppc-opc.c (STRM): New AltiVec operand.
215	(XDSS): New AltiVec instruction form.
216	(mtvscr): Correct operand list.
217	(dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
218
2192001-10-17  Alan Modra  <amodra@bigpond.net.au>
220
221	* po/POTFILES.in: Regenerate.
222
2232001-10-13  matthew green  <mrg@redhat.com>
224
225	* ppc-opc.c (MO): New macro for MO field of mbar instruction.
226	(powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
227	mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
228
2292001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
230
231	* cgen-ibld.in: Include safe-ctype.h in preference to
232	ctype.h.
233	* cgen-asm.in: Include safe-ctype.h in preference to
234	ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
235	TOLOWER instead of tolower.
236	(@arch@_cgen_build_insn_regex): Remove duplication of syntax
237	string elements in constructed regular expression.
238	* fr30-asm.c: Regenerate.
239	* fr30-desc.c: Regenerate.
240	* fr30-ibld.c: Regenerate.
241	* m32r-asm.c: Regenerate.
242	* m32r-desc.c: Regenerate.
243	* m32r-ibld.c: Regenerate.
244	* openrisc-asm.c: Regenerate.
245	* openrisc-desc.c: Regenerate.
246	* openrisc-ibld.c: Regenerate.
247	* po/opcodes.pot: Regenerate.
248
2492001-10-12  matthew green  <mrg@redhat.com>
250
251	* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
252	instruction field instruction/extraction functions for new BookE
253	DE form instructions.
254	(CT): New macro for CT field in an X form instruction.
255	(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
256	instructions.
257	(PPC64): Don't include PPC_OPCODE_PPC.
258	(403): New opcode macro for PPC403 processors.
259	(BOOKE): New opcode macro for BookE processors.
260	(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
261	(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
262	(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
263	(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
264	(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
265	(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
266	(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
267	(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
268	(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
269	(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
270	(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
271	(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
272	(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
273	(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
274
275	* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
276	for a disassembler option of `booke', `booke32' or `booke64' to enable
277	BookE support in the disassembler.
278
2792001-10-12  John Healy  <jhealy@redhat.com>
280
281	* cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
282	for the length when extracting the base part of the insn.
283
2842001-10-09  Bruno Haible  <haible@clisp.cons.org>
285
286	* cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
287	regular expression.  Fix some formatting problems.
288	* fr30-asm.c: Regenerate.
289	* openrisc-asm.c: Regenerate.
290	* m32r-asm.c: Regenerate.
291
2922001-10-09  Christian Groessler <cpg@aladdin.de>
293
294	* z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
295	of indirect register memory accesses to be same format the
296	assembler accepts.
297
2982001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
299
300	* sh-opc.h: Fix encoding of least significant nibble of the
301	DSP single data transfer instructions.
302
303	* sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
304	instructions.
305
3062001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
307
308	* cgen-asm.in: Fix compile time warning messages in generated
309	C files.
310	* cgen-dis.in: The same.
311	* cgen-ibld.in: The same.
312	* fr30-asm.c: Regenerate.
313	* fr30-desc.c: Regenerate.
314	* fr30-dis.c: Regenerate.
315	* fr30-ibld.c: Regenerate.
316	* fr30-opc.c: Regenerate.
317	* m32r-asm.c: Regenerate.
318	* m32r-desc.c: Regenerate.
319	* m32r-dis.c: Regenerate.
320	* m32r-ibld.c: Regenerate.
321	* m32r-opc.c: Regenerate.
322	* m32r-opinst.c Regenerate.
323	* openrisc-asm.c: Regenerate.
324	* openrisc-desc.c: Regenerate.
325	* openrisc-dis.c: Regenerate.
326	* openrisc-ibld.c: Regenerate.
327	* openrisc-opc.c: Regenerate.
328	* openrisc-opc.h: Regenerate.
329	* Makefile.in: Regenerate.
330	* po/POTFILES.in: Regenerate.
331	* po/opcodes.pot: Regenerate.
332
3332001-10-08  Aldy Hernandez  <aldyh@redhat.com>
334
335	* arm-opc.h (arm_opcodes): Add cirrus insns.
336
337	* arm-dis.c (print_insn_arm): Add 'I' case.
338
3392001-10-03  Alan Modra  <amodra@bigpond.net.au>
340
341	* po/POTFILES.in: Regenerate.
342	* configure: Regenerate.
343
3442001-10-02  Alan Modra  <amodra@bigpond.net.au>
345
346	* Makefile.am (Makefile): Depend on bfd/configure.in.
347	Run "make dep-am".
348	* Makefile.in: Regenerate.
349
3502001-09-30  John Healy  <jhealy@redhat.com>
351
352	* cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
353	calls to cgen_get_insn_value and cgen_put_insn_value calls.
354	(extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
355
3562001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
357
358	* Makefile.am: Update dependencies with "make dep-am".
359	* Makefile.in: Regenerate.
360
3612001-09-26  Alan Modra  <amodra@bigpond.net.au>
362
363	* arc-dis.c: Formatting fixes.
364	(my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
365
3662001-09-21  Bruno Haible  <haible@clisp.cons.org>
367
368	* arc-dis.c: Don't include <ctype.h>.
369	* openrisc-desc.c: Likewise.
370	* openrisc-ibld.c: Likewise.
371
3722001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
373
374	* fr30-opc.c: Fix compile time warning messages.
375	* i370-opc.c: Fix compile time warning messages.
376	* i960-dis.c: Fix compile time warning messages.
377	* m32r-asm.c: Fix compile time warning messages.
378	* m32r-desc.c: Fix compile time warning messages.
379	* m32r-dis.c: Fix compile time warning messages.
380	* m32r-ibld.c: Fix compile time warning messages.
381	* m32r-opc.c: Fix compile time warning messages.
382	* m32r-opinst.c: Fix compile time warning messages.
383	* ns32k-dis.c: Fix compile time warning messages.
384	* openrisc-asm.c: Fix compile time warning messages.
385	* openrisc-desc.c: Fix compile time warning messages.
386	* openrisc-dis.c: Fix compile time warning messages.
387	* openrisc-ibld.c: Fix compile time warning messages.
388	* openrisc-opc.c: Fix compile time warning messages.
389	* pdp11-dis.c: Fix compile time warning messages.
390	* tic54x-dis.c: Fix compile time warning messages.
391	* v850-opc.c: Fix compile time warning messages.
392	* vax-dis.c: Fix compile time warning messages.
393	* w65-opc.h: Fix compile time warning messages.
394	* z8k-opc.h: Fix compile time warning messages.
395	* z8kgen.c: Fix compile time warning messages.
396
3972001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
398
399	* arm-dis.c:   Fix compile time warning messages.
400	* cgen-asm.c:  Fix compile time warning messages.
401	* cgen-dis.c:  Fix compile time warning messages.
402	* cris-dis.c:  Fix compile time warning messages.
403	* d10v-dis.c:  Fix compile time warning messages.
404	* fr30-asm.c:  Fix compile time warning messages.
405	* fr30-desc.c: Fix compile time warning messages.
406	* fr30-dis.c:  Fix compile time warning messages.
407	* fr30-ibld.c: Fix compile time warning messages.
408
4092001-09-18  Bruno Haible  <haible@clisp.cons.org>
410
411	* cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
412	(cgen_parse_keyword): Use ISALNUM instead of isalnum.
413	* cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
414	(cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
415	isalpha/tolower.
416	(cgen_keyword_add): Use ISALNUM instead of isalnum.
417	(hash_keyword_name): Use TOLOWER instead of tolower.
418	* fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
419	(parse_insn_normal): Use TOLOWER/ISSPACE instead of
420	tolower/isspace.
421	(fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
422	* fr30-desc.c: Don't include <ctype.h>.
423	* fr30-ibld.c: Likewise.
424	* ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
425	(load_insn_classes, parse_resource_users, load_depfile): Use
426	ISSPACE instead of isspace.
427	* m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
428	(parse_insn_normal): Use TOLOWER/ISSPACE instead of
429	tolower/isspace.
430	(m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
431	* m32r-desc.c: Don't include <ctype.h>.
432	* m32r-ibld.c: Likewise.
433	* openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
434	(parse_insn_normal): Use TOLOWER/ISSPACE instead of
435	tolower/isspace.
436	(openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
437
4382001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
439
440	* Makefile.am: Add rules and dependencies to create the s/390 opcode
441	table out of s390-opc.txt automatically.
442	* configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
443	* s390-mkopc.c (dumpTable): Change output to create a complete file.
444	* s390-opc.c: New improved opcode format macros and remove the
445	pregenerated opcode table.
446	* s390-opc.txt: Adapt to new improved opcode format macros.
447
4482001-09-14  David Schleef <ds@schleef.org>
449
450	* ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
451
4522001-09-04  Alan Modra  <amodra@bigpond.net.au>
453
454	* i386-dis.c (grps): Don't print the implicit al/ax/eax register
455	for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
456
4572001-08-31  Eric Christopher  <echristo@redhat.com>
458	    Jason Eckhardt    <jle@redhat.com>
459
460	* mips-dis.c: Add support for bfd_mach_mipsisa32 and
461	bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
462	bfd_mach_mips64.
463
4642001-08-31  Andreas Jaeger  <aj@suse.de>
465
466	* tic54x-opc.c: Add default initializers to avoid warnings.
467
468	* arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
469	* arc-ext.c: Likewise.
470
4712001-08-28  matthew green  <mrg@redhat.com>
472
473	* ppc-opc.c (icbt): Order correctly.
474
4752001-08-27  David Edelsohn  <dje@watson.ibm.com>
476	    Torbjorn Granlund  <tege@swox.com>
477
478	* ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
479	(LS): Define.
480	(insert_ds): Complain if not a multiple of 4.
481	(XSYNC): Define.
482	(XSYNC_MASK): Define.
483	(powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
484	"slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
485
4862001-08-26  Andreas Jaeger  <aj@suse.de>
487
488	* h8500-opc.h: Add default initializers to h8500_table to shut up
489	GCC warnings.
490
4912001-08-25  Andreas Jaeger  <aj@suse.de>
492
493	* tic54x-dis.c: Add unused attributes where needed.
494
495	* z8k-dis.c (output_instr): Add unused attribute.
496
497	* h8300-dis.c: Add missing prototypes.
498	(bfd_h8_disassemble): Make static.
499
500	* cris-dis.c: Add missing prototype.
501	* h8500-dis.c: Likewise.
502	* m68hc11-dis.c: Likewise.
503	* pj-dis.c: Likewise.
504	* tic54x-dis.c: Likewise.
505	* v850-dis.c: Likewise.
506	* vax-dis.c: Likewise.
507	* w65-dis.c: Likewise.
508	* z8k-dis.c: Likewise.
509
510	* d10v-dis.c: Add missing prototype.
511	(dis_long): Remove unused variable.
512	(dis_2_short): Likewise.
513
514	* sh-dis.c: Add missing prototypes.
515	* v850-opc.c: Likewise.
516	Add unused attributes where needed.
517
518	* ns32k-dis.c: Add missing prototypes.
519	(bit_extract_simple): Remove unused variable.
520
5212001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
522
523	* s390-opc.c: Add "low or high" and "not low or high"
524	branch instructions for gcc 3.0.
525	* s390-opc.txt: Likewise.
526
5272001-08-21  Andreas Jaeger  <aj@suse.de>
528
529	* i960-dis.c: Add parameters for prototypes
530	(ctrl): Add unused attributes.
531	(cobr): Likewise.
532	(put_abs): Likewise.
533
534	* mips-dis.c: Add missing prototypes.
535	* a29k-dis.c: Likewise.
536	* arc-dis.c: Likewise.
537	* ia64-opc.c: Likewise.
538
539	* s390-dis.c: Add missing prototypes.
540	(init_disasm): Remove unused attribute since the parameter is
541	used.
542
5432001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
544
545	* mips-opc.c (M1): Define. Reformatted Code.
546	(mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
547	mtps, mtps. Typo.
548
5492001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
550
551	* mips-opc.c: R3900s can support all branch likely INSN_MACROs where
552	the corresponding non-likely insn is in MIPS I.
553
5542001-08-13  Kazu Hirata  <kazu@hxi.com>
555
556	* mcore-dis.c: Fix formatting.
557	* mips-dis.c: Likewise.
558	* pj-dis.c: Likewise.
559	* z8k-dis.c: Likewise.
560
5612001-08-12  Richard Henderson  <rth@redhat.com>
562
563	* cgen-ibld.in (extract_normal): Match type of VALUE and MASK
564	to *VALUEP.  Regenerate all cgen files.
565
5662001-08-10  Richard Sandiford  <rsandifo@redhat.com>
567
568	* mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
569	argument.
570	* mips-opc.c (G6): Undefine.
571	(mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
572	as the first "move" alternative.
573
5742001-08-10  Andreas Jaeger  <aj@suse.de>
575
576	* configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
577	to build warnings.
578	* configure: Regenerate.
579
5802001-08-10  Alan Modra  <amodra@bigpond.net.au>
581
582	* ppc-opc.c: Revert 2001-08-08.
583
5842001-08-09  Alan Modra  <amodra@bigpond.net.au>
585
586	* dis-buf.c (generic_strcat_address): Add missing prototype.
587	#if 0 the functions as it is unused.
588
5892001-08-08  Alan Modra  <amodra@bigpond.net.au>
590
591	1999-10-25  Torbjorn Granlund  <tege@swox.com>
592	* ppc-opc.c: Include "bfd.h".
593	(powerpc_operands): Add new field for reloc type.
594
5952001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
596
597	* mips-dis.c (print_insn_arg): Don't use software integer registers
598	for coprocessor registers.
599	(get_mips_isa): Removed.
600	(is_newabi): New function, checks if NewABI is used.
601	(_print_insn_mips): Get distinction between old ABI and new ABI right.
602
6032001-08-01  Christian Groessler <cpg@aladdin.de>
604
605	* z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
606	get stderr definition.
607	(internal, gas): Removed warnings.
608	(gas): Create a correct final entry for created array.
609	* z8k-opc.h: Recreated with new z8kgen.
610
6112001-07-28  Kazu Hirata  <kazu@hxi.com>
612
613	* i386-dis.c: Fix formatting.
614
6152001-07-28  Matthias Kramm <kramm@quiss.org>
616
617	* i386-dis.c: Change formatting conventions for architecture
618	i386:intel to better match the format of various intel i386
619	assemblers, like nasm, tasm or masm.
620
6212001-07-24  Alan Modra  <amodra@bigpond.net.au>
622
623	* Makefile.am: Update dependencies with "make dep-am".
624	* Makefile.in: Regenerate
625
6262001-07-24  Kazu Hirata  <kazu@hxi.com>
627
628	* alpha-dis.c: Fix formatting.
629	* cris-dis.c: Likewise.
630	* d10v-dis.c: Likewise.
631	* d30v-dis.c: Likewise.
632	* m10300-dis.c: Likewise.
633	* tic54x-dis.c: Likewise.
634
6352001-07-23  Kazu Hirata  <kazu@hxi.com>
636
637	* m68k-dis.c: Fix formatting.
638	* pj-dis.c: Likewise.
639	* s390-dis.c: Likewise.
640	* z8k-dis.c: Likewise.
641
6422001-07-21  Chris Demetriou  <cgd@broadcom.com>
643
644	* mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
645	into the rest of the surrounding definitions.
646
6472001-07-18  Alan Modra  <amodra@bigpond.net.au>
648
649	* i386-dis.c (grps): Print l or w suffix, and require mem modrm
650	for lgdt, lidt, sgdt, sidt.
651
6522001-07-13  Philip Blundell  <philb@gnu.org>
653
654	* arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
655
6562001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
657
658	* cgen-asm.in: Include "xregex.h" always to enable the libiberty
659	regex support.
660	(@arch@_cgen_build_insn_regex): New routine from Graydon.
661	(@arch@_cgen_assemble_insn): Add Graydon's code to use regex
662	to verify if it is worth parsing the insn as insn "x".  Also update
663	error message when insn is not a recognized format of the insn vs
664	when the insn is completely unrecognized.
665
6662001-07-11  Frank Ch. Eigler  <fche@redhat.com>
667
668	* cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
669	bfd_get_bits.
670	* cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
671	non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
672
6732001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
674
675	* i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
676	(OP_J): Use bfd_vma for mask to work properly with 64 bits.
677	(op_address,op_riprel): Use bfd_vma to handle 64 bits.
678
6792001-07-05  Ben Elliston  <bje@redhat.com>
680
681	* Makefile.am (CPUDIR): Define.
682	(stamp-m32r): Update dependencies.
683	(stamp-fr30): Ditto.
684	(stamp-openrisc): Ditto.
685	* Makefile.in: Regenerate.
686
6872001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
688
689	* ppc-opc.c: Fix encoding of 'clf' instruction.
690
6912001-06-30  Geoffrey Keating  <geoffk@redhat.com>
692
693	* cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
694
6952001-06-28  Geoffrey Keating  <geoffk@redhat.com>
696
697	* cgen-asm.c (cgen_parse_keyword): Allow any first character.
698	* cgen-opc.c (cgen_keyword_add): Ignore special first
699	character when building nonalpha_chars field.
700
7012001-06-24  Ben Elliston  <bje@redhat.com>
702
703	* m88k-dis.c: Format to conform to GNU coding standards.
704
7052001-06-23  Andreas Jaeger  <aj@suse.de>
706
707	* disassemble.c (disassembler_usage): Add unused attribute.
708
7092001-06-22  Eric Christopher  <echristo@redhat.com>
710
711	* mips-opc.c: Move prefx to start of the table.
712
7132001-06-22  Stacey Sheldon <ssheldon@Catena.com>
714
715	* arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
716	instruction.
717
7182001-06-22  Pauli <pauli@moreton.com.au>
719
720	* m68k-opc.c: Add wdebug instruction.
721
7222001-06-15  Aldy Hernandez  <aldyh@redhat.com>
723
724	* m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
725
7262001-06-14  Geoffrey Keating  <geoffk@redhat.com>
727
728	* cgen-asm.c (cgen_parse_keyword): When looking for the
729	boundaries of a keyword, allow any special characters
730	that are actually in one of the allowed keyword.
731	* cgen-opc.c (cgen_keyword_add): Add any special characters
732	to the nonalpha_chars field.
733
7342001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
735
736	* s390-opc.c: Add lgh instruction.
737	* s390-opc.txt: Likewise.
738
7392001-06-11  Alan Modra  <amodra@bigpond.net.au>
740
741	* i386-dis.c: Group function prototypes in one place.
742	(FLOATCODE): Redefine as 1.
743	(USE_GROUPS): Redefine as 2.
744	(USE_PREFIX_USER_TABLE): Redefine as 3.
745	(X86_64_SPECIAL): Define as 4.
746	(GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
747	(PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
748	(dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
749	(dis386): New table combining above four tables.
750	(dis386_twobyte_att, dis386_twobyte_intel): Delete.
751	(dis386_twobyte): New table combining above two tables.
752	(x86_64_table): New table to handle x86_64.
753	(X86_64_0): Define.
754	(float_mem_att, float_mem_intel): Delet.
755	(float_mem): New table combining above two tables.
756	(print_insn_i386): Modify for above.
757	(dofloat): Likewise.
758	(putop): Handle '{', '|' and '}' to select alternative mnemonics.
759	Return 0 on success, 1 if no valid alternative.
760	(putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
761	(putop <case 'T'>): Move to case 'U', and share case 'Q' code.
762	(putop <case 'I'>): Move to case 'T', and share case 'P' code.
763	(OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
764	if not 64-bit mode.
765	(OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
766	(OP_I64): If not 64-bit mode, call OP_I.
767	OP_OFF64): If not 64-bit mode, call OP_OFF.
768	(OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
769	'ignore'/'ignored' to 'bytemode'.
770
7712001-06-10  Alan Modra  <amodra@bigpond.net.au>
772
773	* configure.in: Sort 'ta' case statement.
774	* configure: Regenerate.
775
776	* i386-dis.c (dis386_att): Add 'H' to conditional branch and
777	loop,jcxz insns.
778	(disx86_64_att): Likewise.
779	(dis386_twobyte_att): Likewise.
780	(print_insn_i386): Don't print branch hints as a prefix.
781	(putop): 'H' macro prints branch hints.
782	(get64): Kill compile warnings.
783
7842001-06-09  Alexandre Oliva  <aoliva@redhat.com>
785
786	* sh-opc.h (sh_table): Don't use empty initializers.
787
7882001-06-06  Christian Groessler <cpg@aladdin.de>
789
790	* z8k-dis.c: Fix formatting.
791	(unpack_instr): Remove unused cases in switch statement. Add
792	safety abort() in default case.
793	(unparse_instr): Add safety abort() in default case.
794
7952001-06-06  Peter Jakubek <pjak@snafu.de>
796
797	* m68k-dis.c (print_insn_m68k): Fix typo.
798	* m68k-opc.c (m68k_opcodes): Correct allowed operands for
799	mcf (ColdFire) div, rem and moveb instructions.
800
8012001-06-06  Alan Modra  <amodra@bigpond.net.au>
802
803	* i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
804	(cond_jump_mode, loop_jcxz_mode): Define.
805	(dis386_att): Add cond_jump_flag and loop_jcxz_flag as
806	appropriate, and 'F' suffix to loop insns.
807	(disx86_64_att): Likewise.
808	(dis386_twobyte_att): Likewise.
809	(print_insn_i386): Don't output addr prefix for loop, jcxz insns.
810	Output data size prefix for long conditional jumps.  Output cs and
811	ds branch hints.
812	(putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
813	(OP_J): Don't make PREFIX_DATA used.
814
8152001-06-04  Alexandre Oliva  <aoliva@redhat.com>
816
817	* sh-opc.h (sh_table): Complete last element entry to avoid
818	compiler warning.
819
8202001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
821
822	* mips-dis.c (mips_isa_type): Add MIPS r12k support.
823
8242001-05-23  Alan Modra  <amodra@one.net.au>
825
826	* arc-opc.c: Whitespace changes.
827
8282001-05-18  Hans-Peter Nilsson  <hp@axis.com>
829
830	* cris-opc.c (cris_spec_regs): Add missing initializer field for
831	last element.
832
8332001-05-15  Frank Ch. Eigler  <fche@redhat.com>
834
835	* cgen-dis.in (extract_normal): Complete support for min<base case.
836
8372001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
838
839	* mips-dis.c (INSNLEN): Rename MAXLEN.
840	(std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
841	(print_insn_arg): Remove $ prefix of register names.
842	(set_mips_isa_type): Remove.
843	(mips_isa_type): New function.
844	(get_mips_isa): New Function.
845	(print_insn_mips): Rename _print_insn_mips.
846	(_print_insn_mips): New function, contains code which was
847	duplicated in print_insn_big_mips and print_insn_little_mips.
848	(print_insn_big_mips): Moved code to _print_insn_mips.
849	(print_insn_little_mips): Likewise.
850	(print_mips16_insn_arg): Remove $ prefix of register names.
851	Print error message before abort.
852
8532001-05-14  J.T. Conklin  <jtc@redback.com>
854
855	* ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
856	simplified mnemonics used for setting PPC750-specific special
857	purpose	registers.
858
8592001-05-12  H.J. Lu  <hjl@gnu.org>
860
861	* i386-dis.c (print_insn_i386): Always set `mod', `reg' and
862	`rm'.
863
8642001-05-12  Peter Targett  <peter.targett@arccores.com>
865
866	* arc-opc.c (arc_reg_names): Correct attribute for lp_count
867	register to r/w.  Formatting fixes throughout file.
868
8692001-05-12  Alan Modra  <amodra@one.net.au>
870
871	* i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
872	movq operands.
873	(twobyte_has_modrm): Update table.
874	(need_modrm): Give it file scope.
875	(MODRM_CHECK): Define.
876	(dofloat): Use MODRM_CHECK.
877	(OP_E): Likewise.
878	(OP_EM): Likewise.
879	(OP_EX): Likewise.
880
8812001-05-07  Frank Ch. Eigler  <fche@redhat.com>
882
883	* cgen-dis.in (default_print_insn): Tolerate min<base instructions
884	even at end of a section.
885	* cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
886	by ignoring precariously-unpacked insn_value in favor of raw buffer.
887
8882001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
889
890	* disassemble.c (disassembler_usage): Remove unused attribute.
891
8922001-05-04  Frank Ch. Eigler  <fche@redhat.com>
893
894	* m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
895
8962001-05-04  Frank Ch. Eigler  <fche@redhat.com>
897
898	* cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
899	assume incoming buffer already has the base insn loaded.  Handle
900	smaller-than-base instructions for variable-length case.
901
9022001-05-04  Alan Modra  <amodra@one.net.au>
903
904	* i386-dis.c (Ev, Ed): Remove duplicate define.
905	(Gd): Define.
906	(XS): Define.
907	(OP_XS): New function.
908	(dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
909	movmskp operands.
910	(dis386_twobyte_intel): Likewise.
911	(prefix_user_table): Use MS for maskmovq operand.
912
9132001-04-27  Johan Rydberg  <jrydberg@opencores.org>
914
915	* Makefile.am: Add OpenRISC target.
916	* Makefile.in: Regenerated.
917
918	* disassemble.c (disassembler): Recognize the OpenRISC disassembly.
919
920	* configure.in (bfd_openrisc_arch): Add target.
921	* configure: Regenerated.
922
923	* openrisc-asm.c: New file.
924	* openrisc-desc.c: Likewise.
925	* openrisc-desc.h: Likewise.
926	* openrisc-dis.c: Likewise.
927	* openrisc-ibld.c: Likewise.
928	* openrisc-opc.c: Likewise.
929	* openrisc-opc.h: Likewise.
930
9312001-04-24  Christian Groessler  <cpg@aladdin.de>
932
933	* z8k-dis.c: add names of control registers (ctrl_names);
934	(seg_length): provides instruction length fixup for segmented
935	mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
936	CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
937	(unparse_intr): handle CLASS_PR, print addresses without '#'
938	* z8k-opc.h: re-created with new z8kgen
939	* z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
940	entries for ldctl/ldctlb instruction
941
9422001-04-06  Andreas Jaeger  <aj@suse.de>
943
944	* i386-dis.c: Add ffreep instruction.
945
9462001-03-30  Alexandre Oliva  <aoliva@redhat.com>
947
948	* ppc-opc.c (insert_mbe): Shift mask initializer as long.
949
9502001-03-24  Alan Modra  <alan@linuxcare.com.au>
951
952	* i386-dis.c (PREGRP25): Define.
953	(dis386_twobyte_att): Use here in place of "movntq" entry.
954	(dis386_twobyte_intel): Likewise.
955	(prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
956	(PREGRP26): Define.
957	(dis386_twobyte_att): Use here.
958	(dis386_twobyte_intel): Likewise.
959	(prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
960	(prefix_user_table <maskmovdqu>): XM operand, not MX.
961	(prefix_user_table): Cosmetic changes to "bad" entries.
962
9632001-03-23  Nick Clifton  <nickc@redhat.com>
964
965	* mips-opc.c: Remove extraneous whitespace.
966	* mips-dis.c: Remove extraneous whitespace.
967
9682001-03-22  Ben Elliston  <bje@redhat.com>
969
970	* cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
971	declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
972	* cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
973	to allay a compiler warning.
974
9752001-03-22  Alan Modra  <alan@linuxcare.com.au>
976
977	* i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
978	(dis386_twobyte_intel): Likewise.
979	(twobyte_has_modrm): Set entry for paddq, psubq.
980
9812001-03-20  Patrick Macdonald  <patrickm@redhat.com>
982
983	* cgen-dis.in (print_insn_@arch@): Add support for target machine
984	determination via CGEN_COMPUTE_MACH.
985	* fr30-desc.c: Regenerate.
986	* fr30-dis.c: Regenerate.
987	* fr30-opc.h: Regenerate.
988	* m32r-desc.c: Regenerate.
989	* m32r-dis.c: Regenerate.
990	* m32r-opc.h: Regenerate.
991	* m32r-opinst.c: Regenerate.
992
9932001-03-20  H.J. Lu  <hjl@gnu.org>
994
995	* configure.in: Remove the redundent AC_ARG_PROGRAM.
996	* configure: Rebuild.
997
9982001-03-19  Jim Wilson  <wilson@redhat.com>
999
1000	* ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1001	notestr if larger than xsect.
1002	(in_class): Handle format M5.
1003	* ia64-asmtab.c: Regnerate.
1004
10052001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
1006
1007	* vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1008	has more than one byte left to read.
1009
10102001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
1011
1012	* s390-opc.c: Add new opcodes.  Smooth out formatting.
1013	* s390-opc.txt: Add new opcodes.
1014
10152001-03-06  Nick Clifton  <nickc@redhat.com>
1016
1017	* arm-dis.c (print_insn_thumb): Compute destination address
1018	of BLX(1) instruction by taking bit 1 from PC and not from bit
1019	0 of the offset.
1020
10212001-03-06  Igor Shevlyakov  <igor@windriver.com>
1022
1023	* m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1024	so command line switches will work.
1025
10262001-03-05  Dave Brolley  <brolley@redhat.com>
1027
1028	* fr30-asm.c: Regenerate.
1029	* fr30-desc.c: Regenerate.
1030	* fr30-desc.h: Regenerate.
1031	* fr30-dis.c: Regenerate.
1032	* fr30-ibld.c: Regenerate.
1033	* fr30-opc.c: Regenerate.
1034	* fr30-opc.h: Regenerate.
1035	* m32r-asm.c: Regenerate.
1036	* m32r-desc.c: Regenerate.
1037	* m32r-desc.h: Regenerate.
1038	* m32r-dis.c: Regenerate.
1039	* m32r-ibld.c: Regenerate.
1040	* m32r-opc.c: Regenerate.
1041	* m32r-opc.h: Regenerate.
1042	* m32r-opinst.c: Regenerate.
1043
10442001-02-28  Igor Shevlyakov  <igor@windriver.com>
1045
1046	* m68k-opc.c: fix cpushl according to Motorola. Enable
1047	bunch of instructions for Coldfire 5407 and add all new.
1048
10492001-02-27  Alan Modra  <alan@linuxcare.com.au>
1050
1051	* configure.in (BFD_VERSION): Do without grep.
1052	* configure: Regenerate.
1053	* Makefile.am: Run "make dep-am".
1054	* Makefile.in: Regenerate.
1055
10562001-02-23  David Mosberger  <davidm@hpl.hp.com>
1057
1058	* ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1059	* ia64-asmtab.c: Regenerate.
1060
10612001-02-21  David Mosberger  <davidm@hpl.hp.com>
1062
1063	* ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1064	separate variants: one for IMM22 and the other for IMM14.
1065	* ia64-asmtab.c: Regenerate.
1066
10672001-02-21  Greg McGary  <greg@mcgary.org>
1068
1069	* cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1070
10712001-02-20  H.J. Lu  <hjl@gnu.org>
1072
1073	* Makefile.am (ia64-ic.tbl): Remove the target.
1074	(ia64-raw.tbl): Likewise.
1075	(ia64-waw.tbl): Likewise.
1076	(ia64-war.tbl): Likewise.
1077	(ia64-asmtab.c): Generate it in the source directory.
1078	* Makefile.in: Regenerated.
1079
10802001-02-18  lars brinkhoff  <lars@nocrew.org>
1081
1082	* Makefile.am: Add PDP-11 target.
1083	* configure.in: Likewise.
1084	* disassemble.c: Likewise.
1085	* pdp11-dis.c: New file.
1086	* pdp11-opc.c: New file.
1087
10882001-02-14  Jim Wilson  <wilson@redhat.com>
1089
1090	* ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
1091	* ia64-asmtab.c: Regenerate.
1092
10932001-02-12  Jan Hubicka  <jh@suse.cz>
1094
1095	* i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1096	instructions.
1097	(putop): Handle 'Y'
1098
10992001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
1100
1101	* mips-dis.c (print_insn_arg): Use top four bits of the address of
1102	the following instruction not of the jump itself for the jump
1103	target.
1104	(print_mips16_insn_arg): Likewise.
1105
11062001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1107
1108	* Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1109	directory.
1110	* Makefile.in: Regenerate.
1111
11122001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
1113
1114	* Makefile.am: Add linux target for S/390.
1115	* Makefile.in: Likewise.
1116	* configure.in: Likewise.
1117	* disassemble.c: Likewise.
1118	* s390-dis.c: New file.
1119	* s390-mkopc.c: New file.
1120	* s390-opc.c: New file.
1121	* s390-opc.txt: New file.
1122
11232001-02-05  Jim Wilson  <wilson@redhat.com>
1124
1125	* ia64-asmtab.c: Revert 2000-12-16 change.
1126
11272001-02-02  Patrick Macdonald  <patrickm@redhat.com>
1128
1129	* fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1130	* m32r-desc.h: Regenerate.
1131
11322001-02-01  Jan Hubicka  <jh@suse.cz>
1133
1134	* i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1135	(putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1136
11372001-01-14  Alan Modra  <alan@linuxcare.com.au>
1138
1139	* hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1140
11412001-01-13  Nick Clifton  <nickc@redhat.com>
1142
1143	* disassemble.c: Remove spurious white space.
1144
11452001-01-13  Jan Hubicka  <jh@suse.cz>
1146
1147	* i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1148	templates.
1149
11502001-01-11  Peter Targett  <peter.targett@arccores.com>
1151
1152	* configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1153	* Makefile.am (C_FILES): Add arc-ext.c.
1154	(ALL_MACHINES) Add arc-ext.lo.
1155	(INCLUDES) Add opcode directory to list.
1156	New dependency entry for arc-ext.lo.
1157	* disassemble.c (disassembler): Correct call to
1158	arc_get_disassembler.
1159	* arc-opc.c: New update for ARC, including full base
1160	instructions for ARC variants.
1161	* arc-dis.h, arc-dis.c: New update for ARC, including
1162	extensibility functionality.
1163	* arc-ext.h, arc-ext.c: New files for handling extensibility.
1164
11652001-01-10  Jan Hubicka  <jh@suse.cz>
1166
1167	* i386-dis.c (PREGRP15 - PREGRP24): New.
1168	(dis386_twobyt): Add SSE2 instructions.
1169	(twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1170	(twobyte_uses_f3_prefix): ... this one.
1171	(grps): Add SSE instructions.
1172	(prefix_user_table): Add two new slots; add SSE2 instructions.
1173	(print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1174	Handle the REPNZ and Data16 prefixes as well; do proper lookup
1175	to prefix_user_table.
1176	(OP_E): Accept mfence and lfence as well.
1177	(OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1178	(OP_XMM): Support REX extensions.
1179	(OP_EM): Likewise.
1180	(OP_EX): Likewise.
1181
11822001-01-09  Nick Clifton  <nickc@redhat.com>
1183
1184	* arm-dis.c (print_insn): Set pc to zero for instructions with
1185	a reloc associated with them.
1186
11872001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
1188
1189	* cgen-asm.in (parse_insn_normal): Changed syn to be
1190	CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
1191	as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1192	to '\0' to use 0 instead.
1193	* cgen-dis.in (print_insn_normal): Ditto.
1194	* cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1195
11962001-01-05  Jan Hubicka  <jh@suse.cz>
1197
1198	* i386-dis.c: Add x86_64 support.
1199	(rex): New static variable.
1200	(REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1201	(USED_REX): New macro.
1202	(Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1203	(OP_I64, OP_OFF64, OP_IMREG): New functions.
1204	(OP_REG, OP_OFF): Declare.
1205	(get64, get32, get32s): New functions.
1206	(r??_reg): New constants.
1207	(dis386_att): Change templates of instruction implicitly promoted
1208	to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1209	(grps): Likewise.
1210	(dis386_intel): Likewise.
1211	(dixx86_64_att): New table based on dis386_att.
1212	(dixx86_64_intel): New table based on dis386_intel.
1213	(names64, names8rex): New global variable.
1214	(names32, names16): Add extended registers.
1215	(prefix_user_t): Recognize rex prefixes.
1216	(prefix_name): Print REX prefixes nicely.
1217	(op_riprel): New global variable.
1218	(start_pc): Set type to bfd_vma.
1219	(print_insn_i386): Detect the 64bit mode and use proper table;
1220	move ckprefix after initializing the buffer; output unused rex prefixes;
1221	output information about target of RIP relative addresses.
1222	(putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1223	(print_operand_value): New function.
1224	(OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1225	REX prefix and new modes.
1226	(get64, get32s): New.
1227	(get32): Return bfd_signed_vma type.
1228	(set_op): Initialize the op_riprel.
1229	* disassemble.c (disassembler): Recognize the x86-64 disassembly.
1230
12312001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
1232
1233	 cgen-dis.in (read_insn): Use bfd_get_bits()
1234
12352001-01-02  Richard Sandiford  <rsandifo@redhat.com>
1236
1237	* cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1238	(hash_insn_list): Likewise
1239	* cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1240	(extract_1): Use bfd_get_bits().
1241	(extract_normal): Apply sign extension to both extraction
1242	methods.
1243	* cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1244	(cgen_put_insn_value): Use bfd_put_bits()
1245
12462000-12-28  Frank Ch. Eigler  <fche@redhat.com>
1247
1248	* cgen-asm.in (parse_insn_normal): Print better error message for
1249	instructions with missing operands.
1250
12512000-12-21  Santeri Paavolainen <santtu@ssh.com>
1252
1253	* cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1254
12552000-12-16  Nick Clifton  <nickc@redhat.com>
1256
1257	* Makefile.in: Regenerate.
1258	* aclocal.m4: Regenerate.
1259	* config.in: Regenerate.
1260	* configure.in: Add spacing.
1261	* configure: Regenerate.
1262	* ia64-asmtab.c: Regenerate.
1263	* po/opcodes.pot: Regenerate.
1264
12652000-12-12  Frank Ch. Eigler  <fche@redhat.com>
1266
1267	* cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1268	error messages over later parse-time ones.
1269
12702000-12-12  Jim Wilson  <wilson@redhat.com>
1271
1272	* ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1273	argument.
1274	* ia64-gen.c (insert_deplist): Cast sizeof result to int.
1275	(print_dependency_table): Print NULL if semantics field not set.
1276	(insert_opcode_dependencies): Mark cmp parameter as unused.
1277	(print_main_table): Use fprintf_vma to print long long fields.
1278	(main): Mark argv paramter as unused.  Convert to old style definition.
1279	* ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1280	* ia64-asmtab.c: Regnerate.
1281
12822000-12-09  Nick Clifton  <nickc@redhat.com>
1283
1284	* m32r-dis.c (print_insn): Prevent re-read of instruction from
1285	wrong address.
1286
1287	* fr30-dis.c: Regenerate.
1288
12892000-12-08  Peter Targett  <peter.targett@arccores.com>
1290
1291	* configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1292	* Makefile.am (C_FILES): Add arc-ext.c.
1293	(ALL_MACHINES) Add arc-ext.lo.
1294	(INCLUDES) Add opcode directory to list.
1295	New dependency entry for arc-ext.lo.
1296	* disassemble.c (disassembler): Correct call to
1297	arc_get_disassembler.
1298	* arc-opc.c: New update for ARC, including full base
1299	instructions for ARC variants.
1300	* arc-dis.h, arc-dis.c: New update for ARC, including
1301	extensibility functionality.
1302	* arc-ext.h, arc-ext.c: New files for handling extensibility.
1303
13042000-12-03  Chris Demetriou   cgd@sibyte.com
1305
1306	* mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1307	MOD_HILO, and MOD_LO macros.
1308
1309	* mips-opc.c (M1, M2): Delete.
1310	(mips_builtin_opcodes): Remove all uses of M1.
1311
1312	* mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1313	instructions take "G" format second operands and use the
1314	correct flags.
1315	There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1316	match.
1317	Delete "sel" code operands from mfc1 and mtc1.
1318	Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1319	for dm[ft]c[023].
1320
13212000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
1322	    Chris Demetriou   cgd@sibyte.com
1323
1324	* mips-opc.c (mips_builtin_opcodes): Finish additions
1325	for MIPS32 support, and clean up existing entries for
1326	aesthetics, consistency with the MIPS32 ISA, and
1327	with consistency the rest of the table.
1328
13292000-12-01  Nick Clifton  <nickc@redhat.com>
1330
1331	* mips16-opc.c (mips16_opcodes): Add initialiser for membership
1332	field.
1333
13342000-12-01  Chris Demetriou <cgd@sibyte.com>
1335
1336	mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1337	specifiers.  Update 'B' for new constant names, and remove
1338	'm'.
1339	mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1340	near the top of the array, so they are disassembled properly.
1341	Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
1342	code for MIPS32.  Update "clo" and "clz" to use 'U' operand
1343	specifier.  Add 'H' format specifier variants for "mfc1,"
1344	"mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
1345	MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
1346	"wait" variant which uses 'J' operand specifier.
1347
1348	* mips-dis.c (set_mips_isa_type): Update to use
1349	CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
1350	Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1351	* mips-opc.c (I32): New constant for instructions added in
1352	MIPS32.
1353	(P4): Delete.
1354	(mips_builtin_opcodes) Replace all uses of P4 with I32.
1355
1356	* mips-dis.c (set_mips_isa_type): Add cases for
1357	bfd_mach_mips5 and bfd_mach_mips64.
1358	* mips-opc.c (I64): New definitions.
1359
1360	* mips-dis.c (set_mips_isa_type): Add case for
1361	bfd_mach_mips_sb1.
1362
13632000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
1364
1365	* sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1366	(print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1367	Initialize variable dc to NULL.
1368	(print_insn_shx): Remove unused label d_reg_n.
1369
13702000-11-24  Nick Clifton  <nickc@redhat.com>
1371
1372	* arm-opc.h: Add new opcode formatting parameter 'B'.
1373	(arm_opcodes): Add XScale, v5, and v5te	instructions.
1374	(thumb_opcodes): Add v5t instructions.
1375
1376	* arm-dis.c (print_insn_arm): Handle new 'B' format
1377	parameter.
1378	(print_insn_thumb): Decode BLX(1) instruction.
1379
13802000-11-21  Chris Demetriou  <cgd@sibyte.com>
1381
1382	* mips-opc.c: Fix file header comment.
1383
13842000-11-14  Hans-Peter Nilsson  <hp@axis.com>
1385
1386	* cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1387	print_insn_cris_with_register_prefix.
1388
13892000-11-11  Alexandre Oliva  <aoliva@redhat.com>
1390
1391	* sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1392
13932000-11-07  Matthew Green  <mrg@redhat.com>
1394
1395	* cgen-dis.in (print_insn): All insns which can fit into insn_value
1396	must be loaded there in their entirety.
1397
13982000-10-20  Jakub Jelinek  <jakub@redhat.com>
1399
1400	* sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1401	(compute_arch_mask): Add v8plusb and v9b machines.
1402	(print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1403	* sparc-opc.c: Support for Cheetah instruction set.
1404	(prefetch_table): Add #invalidate.
1405
14062000-10-16  Nick Clifton  <nickc@redhat.com>
1407
1408	* mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1409
14102000-10-06  Dave Brolley  <brolley@redhat.com>
1411
1412	* fr30-desc.h: Regenerate.
1413	* m32r-desc.h: Regenerate.
1414	* m32r-ibld.c: Regenerate.
1415
14162000-10-05  Jim Wilson  <wilson@redhat.com>
1417
1418	* ia64-ic.tbl: Update from Intel.
1419	* ia64-asmtab.c: Regenerate.
1420
14212000-10-04  Kazu Hirata  <kazu@hxi.com>
1422
1423	* ia64-gen.c: Convert C++-style comments to C-style comments.
1424	* tic54x-dis.c: Likewise.
1425
14262000-09-29  Hans-Peter Nilsson  <hp@axis.com>
1427
1428	Changes to add dollar prefix to registers for files where user symbols
1429	don't have a leading underscore.  Fix formatting.
1430	* cris-dis.c (REGISTER_PREFIX_CHAR): New.
1431	(format_reg): Add parameter with_reg_prefix.  All callers changed.
1432	(print_with_operands): Ditto.
1433	(print_insn_cris_generic): Renamed from print_insn_cris, add
1434	parameter with_reg_prefix.
1435	(print_insn_cris_with_register_prefix,
1436	print_insn_cris_without_register_prefix, cris_get_disassembler):
1437	New.
1438	* disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1439
14402000-09-22  Jim Wilson  <wilson@redhat.com>
1441
1442	* ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1443	gt, ge, ngt, and nge.
1444	* ia64-asmtab.c: Regenerate.
1445
1446	* ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1447	* ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1448	(lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1449	* ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1450	* ia64-asmtab.c: Regnerate.
1451
14522000-09-13  Anders Norlander  <anorland@acc.umu.se>
1453
1454	* mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1455	Add mfc0 and mtc0 with sub-selection values.
1456	Add clo and clz opcodes.
1457	Add msub and msubu instructions for MIPS32.
1458	Add madd/maddu aliases for mad/madu for MIPS32.
1459	Support wait, deret, eret, movn, pref for MIPS32.
1460	Support tlbp, tlbr, tlbwi, tlbwr.
1461	(P4): New define.
1462
1463	* mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1464	(print_insn_arg): Handle 'H' args.
1465	(set_mips_isa_type): Recognize 4K.
1466	Use CPU_* defines instead of hardcoded numbers.
1467
14682000-09-11  Catherine Moore <clm@redhat.com>
1469
1470	* d30v-opc.c (d30v_operand_t): New operand type Rb2.
1471	(d30v_format_tab): Use Rb2 for modinc and moddec.
1472
14732000-09-07  Catherine Moore  <clm@redhat.com>
1474
1475	* d30v-opc.c (d30v_format_tab): Use format Ra for
1476	modinc and moddec.
1477
14782000-09-06  Alexandre Oliva  <aoliva@redhat.com>
1479
1480	* configure: Rebuilt with new libtool.m4.
1481
14822000-09-05  Nick Clifton  <nickc@redhat.com>
1483
1484	* configure: Regenerate.
1485	* po/opcodes.pot: Regenerate.
1486
14872000-08-31  Alexandre Oliva  <aoliva@redhat.com>
1488
1489	* acinclude.m4: Include libtool and gettext macros from the
1490	top level.
1491	* aclocal.m4, configure: Rebuilt.
1492
14932000-08-30  Kazu Hirata  <kazu@hxi.com>
1494
1495	* tic80-dis.c: Fix formatting.
1496
14972000-08-29  Kazu Hirata  <kazu@hxi.com>
1498
1499	* w65-dis.c: Fix formatting.
1500
15012000-08-28  Mark Hatle  <mhatle@mvista.com>
1502
1503	* ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1504	(powerpc_opcodes): Add table entries for PPC 405 instructions.
1505	Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1506	instructions.  Added extended mnemonic mftbl as defined in the
1507	405GP manual for all PPCs.
1508
15092000-08-28  Jim Wilson  <wilson@redhat.com>
1510
1511	* ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1512	call.  Change last goto to use failed instead of done.
1513
15142000-08-28  Dave Brolley  <brolley@redhat.com>
1515
1516	* cgen-ibld.in (cgen_put_insn_int_value): New function.
1517	(insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1518	(insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1519	(extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1520	* cgen-dis.in (read_insn): New static function.
1521	(print_insn): Use read_insn to read the insn into the buffer and set
1522	up for disassembly.
1523	(print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1524	in the buffer.
1525	* fr30-asm.c: Regenerated.
1526	* fr30-desc.c: Regenerated.
1527	* fr30-desc.h: Regenerated.
1528	* fr30-dis.c: Regenerated.
1529	* fr30-ibld.c: Regenerated.
1530	* fr30-opc.c: Regenerated.
1531	* fr30-opc.h: Regenerated.
1532	* m32r-asm.c: Regenerated.
1533	* m32r-desc.c: Regenerated.
1534	* m32r-desc.h: Regenerated.
1535	* m32r-dis.c: Regenerated.
1536	* m32r-ibld.c: Regenerated.
1537	* m32r-opc.c: Regenerated.
1538
15392000-08-28  Kazu Hirata  <kazu@hxi.com>
1540
1541	* tic30-dis.c: Fix formatting.
1542
15432000-08-27  Kazu Hirata  <kazu@hxi.com>
1544
1545	* sh-dis.c: Fix formatting.
1546
15472000-08-24  David Edelsohn  <dje@watson.ibm.com>
1548
1549	* ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1550
15512000-08-24  Kazu Hirata  <kazu@hxi.com>
1552
1553	* z8k-dis.c: Fix formatting.
1554
15552000-08-16  Jim Wilson  <wilson@redhat.com>
1556
1557	* ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
1558	break, mov-immediate, nop.
1559	* ia64-opc-f.c: Delete fpsub instructions.
1560	* ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1561	address operand.  Rewrite using macros to avoid long lines.
1562	* ia64-opc.h (POSTINC): Define.
1563	* ia64-asmtab.c: Regenerate.
1564
15652000-08-15  Jim Wilson  <wilson@redhat.com>
1566
1567	* ia64-ic.tbl: Add missing entries.
1568
15692000-08-08  Jason Eckhardt  <jle@redhat.com>
1570
1571	* i860-dis.c (print_br_address): Change third argument from int
1572	to long.
1573
15742000-08-07  Richard Henderson  <rth@redhat.com>
1575
1576	* ia64-dis.c (print_insn_ia64): Get byte skip count correct
1577	for MLI templates.  Handle IA64_OPND_TGT64.
1578
15792000-08-04  Ben Elliston  <bje@redhat.com>
1580
1581	* cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1582	* cgen.sh: Likewise.
1583
15842000-08-02  Jim Wilson  <wilson@redhat.com>
1585
1586	* ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1587
15882000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
1589
1590	* avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1591	Change return type from void to int.  Check the combination
1592	of operands, return 1 if valid.  Fix to avoid BUF overflow.
1593	Report undefined combinations of operands in COMMENT.
1594	Report internal errors to stderr.  Output the adiw/sbiw
1595	constant operand in both decimal and hex.
1596	(print_insn_avr): Disassemble ldd/std with displacement of 0
1597	as ld/st.  Check avr_operand () return value, handle invalid
1598	combinations of operands like unknown opcodes.
1599
16002000-07-28  Ben Elliston  <bje@redhat.com>
1601
1602	* Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1603	(run-cgen, stamp-m32r, stamp-fr30): New targets.
1604	* Makefile.in: Regenerate.
1605	* configure.in: Add --enable-cgen-maint option.
1606	* configure: Regenerate.
1607
16082000-07-26  Dave Brolley  <brolley@redhat.com>
1609
1610	* cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1611	(cgen_hw_lookup_by_num): Ditto.
1612	(cgen_operand_lookup_by_name): Ditto.
1613	(print_address): Ditto.
1614	(print_keyword): Ditto.
1615	* cgen-dis.c (hash_insn_array): Mark unused parameters with
1616	ATTRIBUTE_UNUSED.
1617	* cgen-asm.c (hash_insn_array): Mark unused parameters with
1618	ATTRIBUTE_UNUSED.
1619	(cgen_parse_keyword): Ditto.
1620
16212000-07-22  Jason Eckhardt  <jle@redhat.com>
1622
1623	* i860-dis.c: New file.
1624	(print_insn_i860): New function.
1625	(print_br_address): New function.
1626	(sign_extend): New function.
1627	(BITWISE_OP): New macro.
1628	(I860_REG_PREFIX): New macro.
1629	(grnames, frnames, crnames): New structures.
1630
1631	* disassemble.c (ARCH_i860): Define.
1632	(disassembler): Add check for bfd_arch_i860 to set disassemble
1633	function to print_insn_i860.
1634
1635	* Makefile.in (CFILES): Added i860-dis.c.
1636	(ALL_MACHINES): Added i860-dis.lo.
1637	(i860-dis.lo): New dependences.
1638
1639	* configure.in: New bits for bfd_i860_arch.
1640
1641	* configure: Regenerated.
1642
16432000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1644
1645	* Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1646	(ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1647	(cris-dis.lo, cris-opc.lo): New rules.
1648	* Makefile.in: Rebuild.
1649	* configure.in (bfd_cris_arch): New target.
1650	* configure: Rebuild.
1651	* disassemble.c (ARCH_cris): Define.
1652	(disassembler): Support ARCH_cris.
1653	* cris-dis.c, cris-opc.c: New files.
1654	* po/POTFILES.in, po/opcodes.pot: Regenerate.
1655
16562000-07-11  Jakub Jelinek  <jakub@redhat.com>
1657
1658	* sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1659	Reported by Bill Clarke <llib@computer.org>.
1660
16612000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1662
1663	* ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1664	Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1665
16662000-07-09  Alan Modra  <alan@linuxcare.com.au>
1667
1668	* hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1669	fput_const, extract_3, extract_5_load, extract_5_store,
1670	extract_5r_store, extract_5R_store, extract_10U_store,
1671	extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1672	extract_12, extract_17, extract_22): Prototype.
1673	(print_insn_hppa): Rename inner block opcode -> opc to avoid
1674	shadowing outer block.
1675	(GET_BIT): Define.
1676
16772000-07-05  DJ Delorie  <dj@redhat.com>
1678
1679	* MAINTAINERS: new
1680
16812000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1682
1683	* arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1684
16852000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1686
1687	* avr-dis.c (avr_operand): Change _ () to _() around all strings
1688	marked for translation (exception from the usual coding style).
1689	(print_insn_avr): Initialize insn2 to avoid warnings.
1690
16912000-07-03  Kazu Hirata  <kazu@hxi.com>
1692
1693	* h8300-dis.c (bfd_h8_disassemble): Improve readability.
1694	* h8500-dis.c: Fix formatting.
1695
16962000-07-01  Alan Modra  <alan@linuxcare.com.au>
1697
1698	* Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1699	(CLEANFILES): Add DEPA.
1700	* Makefile.in: Regenerate.
1701
17022000-06-26  Scott Bambrough  <scottb@netwinder.org>
1703
1704	* arm-dis.c (regnames): Add an additional register set to match
1705	the set used by GCC.  Make it the default.
1706
17072000-06-22  Alan Modra  <alan@linuxcare.com.au>
1708
1709	* Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1710	find one.
1711	* Makefile.in: Regenerate.
1712
17132000-06-20  H.J. Lu  <hjl@gnu.org>
1714
1715	* Makefile.am: Rebuild dependency.
1716	* Makefile.in: Rebuild.
1717
17182000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1719
1720	* Makefile.in, configure: regenerate
1721	* disassemble.c (disassembler): Recognize ARCH_m68hc12,
1722	ARCH_m68hc11.
1723	* m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1724	New functions.
1725	* configure.in: Recognize m68hc12 and m68hc11.
1726	* m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1727	* Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1728	and opcode generation for m68hc11 and m68hc12.
1729
17302000-06-16  Nick Duffek  <nsd@redhat.com>
1731
1732	* disassemble.c (disassembler): Refer to the PowerPC 620 using
1733	bfd_mach_ppc_620 instead of 620.
1734
17352000-06-12  Kazu Hirata  <kazu@hxi.com>
1736
1737	* h8300-dis.c: Fix formatting.
1738	(bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1739	correctly.
1740
17412000-06-09  Denis Chertykov  <denisc@overta.ru>
1742
1743	* avr-dis.c (avr_operand): Bugfix for jmp/call address.
1744
17452000-06-07  Denis Chertykov  <denisc@overta.ru>
1746
1747	* avr-dis.c: completely rewritten.
1748
17492000-06-02  Kazu Hirata  <kazu@hxi.com>
1750
1751	* h8300-dis.c: Follow the GNU coding style.
1752	(bfd_h8_disassemble) Fix a typo.
1753
17542000-06-01  Kazu Hirata  <kazu@hxi.com>
1755
1756	* h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1757	(bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1758	correctly.  Fix a typo.
1759
17602000-05-31  Nick Clifton  <nickc@redhat.com>
1761
1762	* opintl.h (_(String)): Explain why dgettext is used instead of
1763	gettext.
1764
17652000-05-30  Nick Clifton  <nickc@redhat.com>
1766
1767	* opintl.h (gettext, dgettext, dcgettext, textdomain,
1768	bindtextdomain): Replace defines with those from intl/libgettext.h
1769	to quieten gcc warnings.
1770
17712000-05-26  Alan Modra  <alan@linuxcare.com.au>
1772
1773	* Makefile.am: Update dependencies with "make dep-am"
1774	* Makefile.in: Regenerate.
1775
17762000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1777
1778	* m10300-dis.c (disassemble): Don't assume 32-bit longs when
1779	sign-extending operands.
1780
17812000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1782
1783	* d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1784	except brf's.
1785
17862000-05-21  Nick Clifton  <nickc@redhat.com>
1787
1788	* Makefile.am (LIBIBERTY): Define.
1789
17902000-05-19 Diego Novillo <dnovillo@redhat.com>
1791
1792	* mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1793	(STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1794	(reg_names): Rename to std_reg_names. Change it to a char **
1795	static variable.
1796	(std_reg_names): New name for reg_names.
1797	(set_mips_isa_type): Set reg_names to point to std_reg_names by
1798	default.
1799
18002000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1801
1802	* fr30-desc.h: Partially regenerated to account for changed
1803	CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1804	* m32r-desc.h: Ditto.
1805
18062000-05-15  Nick Clifton  <nickc@redhat.com>
1807
1808	* arm-opc.h: Use upper case for flasg in MSR and MRS
1809	instructions.  Allow any bit to be set in the field_mask of
1810	the MSR instruction.
1811
1812	* arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1813	field_mask of an MSR instruction.
1814
18152000-05-11  Thomas de Lellis  <tdel@windriver.com>
1816
1817	* arm-opc.h: Disassembly of thumb ldsb/ldsh
1818	instructions changed to ldrsb/ldrsh.
1819
18202000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1821
1822	* mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1823	target addresses for 'jal' and 'j'.
1824
18252000-05-10  Geoff Keating  <geoffk@redhat.com>
1826
1827	* ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1828	also available in common mode when powerpc syntax is being used.
1829
18302000-05-08  Alan Modra  <alan@linuxcare.com.au>
1831
1832	* m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1833	(dummy_print_address): Ditto.
1834
18352000-05-04  Timothy Wall  <twall@redhat.com>
1836
1837	* tic54x-opc.c: New.
1838	* tic54x-dis.c: New.
1839	* disassemble.c (disassembler): Add ARCH_tic54x.
1840	* configure.in: Added tic54x target.
1841	* configure: Ditto.
1842	* Makefile.am: Add tic54x dependencies.
1843	* Makefile.in: Ditto.
1844
18452000-05-03  J.T. Conklin  <jtc@redback.com>
1846
1847	* ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1848	vector unit operands.
1849	(VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1850	unit instruction formats.
1851	(PPCVEC): New macro, mask for vector instructions.
1852	(powerpc_operands): Add table entries for above operand types.
1853	(powerpc_opcodes): Add table entries for vector instructions.
1854
1855	* ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1856	(print_insn_little_powerpc): Likewise.
1857	(print_insn_powerpc): Prepend 'v' when printing vector registers.
1858
18592000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1860
1861	* configure.in: Add bfd_powerpc_64_arch.
1862	* disassemble.c (disassembler): Use print_insn_big_powerpc for
1863	64 bit code.
1864
18652000-04-24  Nick Clifton  <nickc@redhat.com>
1866
1867	* fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1868	field.
1869
18702000-04-23  Denis Chertykov  <denisc@overta.ru>
1871
1872	* avr-dis.c (reg_fmul_d): New. Extract destination register from
1873	FMUL instruction.
1874	(reg_fmul_r): New. Extract source register from FMUL instruction.
1875	(reg_muls_d): New. Extract destination register from MULS instruction.
1876	(reg_muls_r): New. Extract source register from MULS instruction.
1877	(reg_movw_d): New. Extract destination register from MOVW instruction.
1878	(reg_movw_r): New. Extract source register from MOVW instruction.
1879	(print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1880	EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1881
18822000-04-22  Timothy Wall  <twall@redhat.com>
1883
1884	* ia64-gen.c (general): Add an ordered table of primary
1885	opcode names, as well as priority fields to disassembly data
1886	structures to enforce a preferred disassembly format based on the
1887	ordering of the opcode tables.
1888	(load_insn_classes): Show a useful message if IC tables are missing.
1889	(load_depfile): Ditto.
1890	* ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1891	distinguish preferred disassembly.
1892	* ia64-opc-f.c: Reorder some insn for preferred disassembly
1893	format.  Fix incorrect flag on fma.s/fma.s.s0.
1894	* ia64-opc.c: Scan *all* disassembly matches and use the one with
1895	the highest priority.
1896	* ia64-opc-b.c: Use more abbreviations.
1897	* ia64-asmtab.c: Regenerate.
1898
18992000-04-21  Jason Eckhardt  <jle@redhat.com>
1900
1901	* hppa-dis.c (extract_16): New function.
1902	(print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1903	new operand types l,y,&,fe,fE,fx.
1904
19052000-04-21  Richard Henderson  <rth@redhat.com>
1906	    David Mosberger  <davidm@hpl.hp.com>
1907	    Timothy Wall <twall@redhat.com>
1908	    Bob Manson  <manson@charmed.cygnus.com>
1909	    Jim Wilson  <wilson@redhat.com>
1910
1911	* Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1912	(CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1913	ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1914	ia64-asmtab.c.
1915	(ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1916	(ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1917	ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1918	* Makefile.in: Rebuild.
1919	* configure Rebuild.
1920	* configure.in (bfd_ia64_arch): New target.
1921	* disassemble.c (ARCH_ia64): Define.
1922	(disassembler): Support ARCH_ia64.
1923	* ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1924	ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1925	ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1926	ia64-war.tbl, ia64-waw.tbl: New files.
1927
19282000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1929
1930	* m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1931	(disassemble): Use them.
1932
19332000-04-14  Alan Modra  <alan@linuxcare.com.au>
1934
1935	* sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1936	* Makefile.am: Update dependencies.
1937	* Makefile.in: Regenerate.
1938
19392000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1940
1941	* a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1942	avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1943	disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1944	i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1945	m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1946	mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1947	ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1948	tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1949	w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1950	ansidecl.h as sysdep.h includes it.
1951
19522000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1953
1954	* configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1955	--enable-build-warnings option.
1956	* Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1957	* Makefile.in, configure: Re-generate.
1958
19592000-04-05  J"orn Rennecke <amylaar@redhat.com>
1960
1961	* sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1962	stc GBR,@-<REG_N> is available for arch_sh1_up.
1963	Group parallel processing insn with identical mnemonics together.
1964	Make three-operand psha / pshl come first.
1965
19662000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1967
1968	* sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1969	Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1970	(sh_arg_type): Add A_PC.
1971	(sh_table): Update entries using immediates.  Add repeat.
1972	* sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1973	Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1974
19752000-04-04  Alan Modra  <alan@linuxcare.com.au>
1976
1977	* po/opcodes.pot: Regenerate.
1978
1979	* Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1980	(DEP): Quote when passing vars to sub-make.  Add warning message
1981	to end.
1982	(DEP1): Rewrite for "gcc -MM".
1983	(CLEANFILES): Add DEP2.
1984	Update dependencies.
1985	* Makefile.in: Regenerate.
1986
19872000-04-03  Denis Chertykov  <denisc@overta.ru>
1988
1989	* avr-dis.c: Syntax cleanup.
1990	(add0fff): Print the pc relative address as a signed number.
1991	(add03f8): Likewise.
1992
19932000-04-01  Ian Lance Taylor  <ian@zembu.com>
1994
1995	* disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1996	the parameter ATTRIBUTE_UNUSED.
1997	* ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1998
19992000-04-01  Alexandre Oliva  <aoliva@redhat.com>
2000
2001	* m10300-opc.c: SP-based offsets are always unsigned.
2002
20032000-03-29  Thomas de Lellis  <tdel@windriver.com>
2004
2005	* arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2006	[branch always] instead of "undefined".
2007
20082000-03-27  Nick Clifton  <nickc@redhat.com>
2009
2010	* d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2011	short instructions, from end of list of long instructions.
2012
20132000-03-27  Ian Lance Taylor  <ian@zembu.com>
2014
2015	* Makefile.am (CFILES): Add avr-dis.c.
2016	(ALL_MACHINES): Add avr-dis.lo.
2017
20182000-03-27  Alan Modra  <alan@linuxcare.com>
2019
2020	* avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2021	truncate integers.
2022	(print_insn_avr): Call function via pointer in K&R compatible way.
2023	(dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2024	add0fff, add03f8): Convert to old style function declaration and
2025	add prototype.
2026	(avrdis_opcode): Add prototype.
2027
20282000-03-27  Denis Chertykov  <denisc@overta.ru>
2029
2030	* avr-dis.c: New file.  AVR disassembler.
2031	* configure.in (bfd_avr_arch): New architecture support.
2032	* disassemble.c: Likewise.
2033	* configure: Regenerate.
2034
20352000-03-06  J"oern Rennecke <amylaar@redhat.com>
2036
2037	* sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2038
20392000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
2040
2041	* d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
2042	flag to determine if operand is pc-relative.
2043	* d30v-opc.c:
2044	(d30v_format_table):
2045	(REL6S3): Renamed from IMM6S3.
2046	Added flag OPERAND_PCREL.
2047	(REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2048	added flag OPERAND_PCREL.
2049	(IMM12S3U): Replaced with REL12S3.
2050	(SHORT_D2, LONG_D): Delay target is pc-relative.
2051	(SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2052	Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2053	using the REL* operands.
2054	(LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2055	(SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2056	LONG_Db, using REL* operands.
2057	(SHORT_U, SHORT_A5S): Removed stray alternatives.
2058	(d30v_opcode_table): Use new *r formats.
2059
20602000-02-28  Nick Clifton  <nickc@redhat.com>
2061
2062	* m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2063	'signed_overflow_ok_p'.
2064
20652000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
2066
2067	* Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2068	name of the libtool directory.
2069	* Makefile.in: Rebuild.
2070
20712000-02-24  Nick Clifton  <nickc@redhat.com>
2072
2073	* cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2074	(cgen_clear_signed_overflow_ok): New function.
2075	(cgen_signed_overflow_ok_p): New function.
2076
20772000-02-23  Andrew Haley  <aph@redhat.com>
2078
2079	* m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2080	m32r-ibld.c, m32r-opc.h: Rebuild.
2081
20822000-02-23  Linas Vepstas <linas@linas.org>
2083
2084	* i370-dis.c, i370-opc.c: New.
2085
2086	* disassemble.c (ARCH_i370): Define.
2087	(disassembler): Handle it.
2088
2089	* Makefile.am: Add support for Linux/IBM 370.
2090	* configure.in: Likewise.
2091
2092	* Makefile.in: Regenerate.
2093	* configure: Likewise.
2094
20952000-02-22  Chandra Chavva   <cchavva@redhat.com>
2096
2097	* d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2098	ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2099	procedure.
2100
21012000-02-22  Andrew Haley  <aph@redhat.com>
2102
2103	* mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2104	force gp32 to zero.
2105	* mips-opc.c (G6): New define.
2106	(mips_builtin_op): Add "move" definition for -gp32.
2107
21082000-02-22  Ian Lance Taylor  <ian@zembu.com>
2109
2110	From Grant Erickson <gerickso@Brocade.COM>:
2111	* ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2112
21132000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
2114
2115	* dis-buf.c (buffer_read_memory): Change `length' param and all int
2116	vars to unsigned.
2117
21182000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2119
2120	* sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2121	(print_insn_ppi): Likewise.
2122	(print_insn_shx): Use info->mach to select appropriate insn set.
2123	Add support for sh-dsp.  Remove FD_REG_N support.
2124	* sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2125	(sh_arg_type): Likewise.  Remove FD_REG_N.
2126	(sh_dsp_reg_nums): New enum.
2127	(arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2128	(arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2129	(arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2130	(arch_sh3_dsp_up): Likewise.
2131	(sh_opcode_info): New field: arch.
2132	(sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2133	D_REG_N.  Fill in arch field.  Add sh-dsp insns.
2134
21352000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
2136
2137	* arm-dis.c: Change flavor name from atpcs-special to
2138	special-atpcs to prevent name conflict in gdb.
2139	(get_arm_regname_num_options, set_arm_regname_option,
2140	get_arm_regnames): New functions.  API to access the several
2141	flavor of register names.  Note: Used by gdb.
2142	(print_insn_thumb): Use the register name entry from the currently
2143	selected flavor for LR and PC.
2144
21452000-02-10  Nick Clifton  <nickc@redhat.com>
2146
2147	* mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2148	classes.
2149	(mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2150	"mulsh.h" instructions.
2151	* mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2152	classes.
2153	(print_insn_mcore): Add support for little endian targets.
2154	Add support for MULSH and OPSR classes.
2155
21562000-02-07  Nick Clifton  <nickc@redhat.com>
2157
2158	* arm-dis.c (parse_arm_diassembler_option): Rename again.
2159	Previous delat did not take.
2160
21612000-02-03  Timothy Wall  <twall@redhat.com>
2162
2163	* dis-buf.c (buffer_read_memory):  Use octets_per_byte field
2164	to adjust target address bounds checking and calculate the
2165	appropriate octet offset into data.
2166
21672000-01-27  Nick Clifton  <nickc@redhat.com>
2168
2169	* arm-dis.c: (parse_disassembler_option): Rename to
2170	parse_arm_disassembler_option and allow to be exported.
2171
2172	* disassemble.c (disassembler_usage): New function: Print out any
2173	target specific disassembler options.
2174	Call arm_disassembler_options() if the ARM architecture is being
2175	supported.
2176
2177	* arm-dis.c (NUM_ELEM): Define this macro if not already
2178	defined.
2179	(arm_regname): New struct type for ARM register names.
2180	(arm_toggle_regnames): Delete.
2181	(parse_disassembler_option): Use register name structure.
2182	(print_insn): New function: Combines duplicate code found in
2183	print_insn_big_arm and print_insn_little_arm.
2184	(print_insn_big_arm): Call print_insn.
2185	(print_insn_little_arm): Call print_insn.
2186	(print_arm_disassembler_options): Display list of supported,
2187	ARM specific disassembler options.
2188
21892000-01-27  Thomas de Lellis  <tdel@windriver.com>
2190
2191	* arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2192	ARM_STT_16BIT flag as Thumb code symbols.
2193
2194	* arm-dis.c (printf_insn_little_arm): Ditto.
2195
21962000-01-25  Thomas de Lellis  <tdel@windriver.com>
2197
2198	* arm-dis.c (printf_insn_thumb): Prevent double dumping
2199	of raw thumb instructions.
2200
22012000-01-20  Nick Clifton  <nickc@redhat.com>
2202
2203	* mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2204
22052000-01-03  Nick Clifton  <nickc@cygnus.com>
2206
2207	* arm-dis.c (streq): New macro.
2208	(strneq): New macro.
2209	(force_thumb): ew local variable.
2210	(parse_disassembler_option): New function: Parse a single, ARM
2211	specific disassembler command line switch.
2212	(parse_disassembler_option): Call parse_disassembler_option to
2213	parse individual command line switches.
2214	(print_insn_big_arm): Check force_thumb.
2215	(print_insn_little_arm): Check force_thumb.
2216
2217For older changes see ChangeLog-9899
2218
2219Copyright (C) 2000-2001 Free Software Foundation, Inc.
2220
2221Copying and distribution of this file, with or without modification,
2222are permitted in any medium without royalty provided the copyright
2223notice and this notice are preserved.
2224
2225Local Variables:
2226mode: change-log
2227left-margin: 8
2228fill-column: 74
2229version-control: never
2230End:
2231