1 /* BFD support for handling relocation entries.
2    Copyright (C) 1990-2018 Free Software Foundation, Inc.
3    Written by Cygnus Support.
4 
5    This file is part of BFD, the Binary File Descriptor library.
6 
7    This program is free software; you can redistribute it and/or modify
8    it under the terms of the GNU General Public License as published by
9    the Free Software Foundation; either version 3 of the License, or
10    (at your option) any later version.
11 
12    This program is distributed in the hope that it will be useful,
13    but WITHOUT ANY WARRANTY; without even the implied warranty of
14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15    GNU General Public License for more details.
16 
17    You should have received a copy of the GNU General Public License
18    along with this program; if not, write to the Free Software
19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
20    MA 02110-1301, USA.  */
21 
22 /*
23 SECTION
24 	Relocations
25 
26 	BFD maintains relocations in much the same way it maintains
27 	symbols: they are left alone until required, then read in
28 	en-masse and translated into an internal form.  A common
29 	routine <<bfd_perform_relocation>> acts upon the
30 	canonical form to do the fixup.
31 
32 	Relocations are maintained on a per section basis,
33 	while symbols are maintained on a per BFD basis.
34 
35 	All that a back end has to do to fit the BFD interface is to create
36 	a <<struct reloc_cache_entry>> for each relocation
37 	in a particular section, and fill in the right bits of the structures.
38 
39 @menu
40 @* typedef arelent::
41 @* howto manager::
42 @end menu
43 
44 */
45 
46 /* DO compile in the reloc_code name table from libbfd.h.  */
47 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
48 
49 #include "sysdep.h"
50 #include "bfd.h"
51 #include "bfdlink.h"
52 #include "libbfd.h"
53 #include "bfdver.h"
54 /*
55 DOCDD
56 INODE
57 	typedef arelent, howto manager, Relocations, Relocations
58 
59 SUBSECTION
60 	typedef arelent
61 
62 	This is the structure of a relocation entry:
63 
64 CODE_FRAGMENT
65 .
66 .typedef enum bfd_reloc_status
67 .{
68 .  {* No errors detected.  Note - the value 2 is used so that it
69 .     will not be mistaken for the boolean TRUE or FALSE values.  *}
70 .  bfd_reloc_ok = 2,
71 .
72 .  {* The relocation was performed, but there was an overflow.  *}
73 .  bfd_reloc_overflow,
74 .
75 .  {* The address to relocate was not within the section supplied.  *}
76 .  bfd_reloc_outofrange,
77 .
78 .  {* Used by special functions.  *}
79 .  bfd_reloc_continue,
80 .
81 .  {* Unsupported relocation size requested.  *}
82 .  bfd_reloc_notsupported,
83 .
84 .  {* Unused.  *}
85 .  bfd_reloc_other,
86 .
87 .  {* The symbol to relocate against was undefined.  *}
88 .  bfd_reloc_undefined,
89 .
90 .  {* The relocation was performed, but may not be ok - presently
91 .     generated only when linking i960 coff files with i960 b.out
92 .     symbols.  If this type is returned, the error_message argument
93 .     to bfd_perform_relocation will be set.  *}
94 .  bfd_reloc_dangerous
95 . }
96 . bfd_reloc_status_type;
97 .
98 .
99 .typedef struct reloc_cache_entry
100 .{
101 .  {* A pointer into the canonical table of pointers.  *}
102 .  struct bfd_symbol **sym_ptr_ptr;
103 .
104 .  {* offset in section.  *}
105 .  bfd_size_type address;
106 .
107 .  {* addend for relocation value.  *}
108 .  bfd_vma addend;
109 .
110 .  {* Pointer to how to perform the required relocation.  *}
111 .  reloc_howto_type *howto;
112 .
113 .}
114 .arelent;
115 .
116 */
117 
118 /*
119 DESCRIPTION
120 
121 	Here is a description of each of the fields within an <<arelent>>:
122 
123 	o <<sym_ptr_ptr>>
124 
125 	The symbol table pointer points to a pointer to the symbol
126 	associated with the relocation request.  It is the pointer
127 	into the table returned by the back end's
128 	<<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
129 	referenced through a pointer to a pointer so that tools like
130 	the linker can fix up all the symbols of the same name by
131 	modifying only one pointer. The relocation routine looks in
132 	the symbol and uses the base of the section the symbol is
133 	attached to and the value of the symbol as the initial
134 	relocation offset. If the symbol pointer is zero, then the
135 	section provided is looked up.
136 
137 	o <<address>>
138 
139 	The <<address>> field gives the offset in bytes from the base of
140 	the section data which owns the relocation record to the first
141 	byte of relocatable information. The actual data relocated
142 	will be relative to this point; for example, a relocation
143 	type which modifies the bottom two bytes of a four byte word
144 	would not touch the first byte pointed to in a big endian
145 	world.
146 
147 	o <<addend>>
148 
149 	The <<addend>> is a value provided by the back end to be added (!)
150 	to the relocation offset. Its interpretation is dependent upon
151 	the howto. For example, on the 68k the code:
152 
153 |        char foo[];
154 |        main()
155 |                {
156 |                return foo[0x12345678];
157 |                }
158 
159 	Could be compiled into:
160 
161 |        linkw fp,#-4
162 |        moveb @@#12345678,d0
163 |        extbl d0
164 |        unlk fp
165 |        rts
166 
167 	This could create a reloc pointing to <<foo>>, but leave the
168 	offset in the data, something like:
169 
170 |RELOCATION RECORDS FOR [.text]:
171 |offset   type      value
172 |00000006 32        _foo
173 |
174 |00000000 4e56 fffc          ; linkw fp,#-4
175 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
176 |0000000a 49c0               ; extbl d0
177 |0000000c 4e5e               ; unlk fp
178 |0000000e 4e75               ; rts
179 
180 	Using coff and an 88k, some instructions don't have enough
181 	space in them to represent the full address range, and
182 	pointers have to be loaded in two parts. So you'd get something like:
183 
184 |        or.u     r13,r0,hi16(_foo+0x12345678)
185 |        ld.b     r2,r13,lo16(_foo+0x12345678)
186 |        jmp      r1
187 
188 	This should create two relocs, both pointing to <<_foo>>, and with
189 	0x12340000 in their addend field. The data would consist of:
190 
191 |RELOCATION RECORDS FOR [.text]:
192 |offset   type      value
193 |00000002 HVRT16    _foo+0x12340000
194 |00000006 LVRT16    _foo+0x12340000
195 |
196 |00000000 5da05678           ; or.u r13,r0,0x5678
197 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
198 |00000008 f400c001           ; jmp r1
199 
200 	The relocation routine digs out the value from the data, adds
201 	it to the addend to get the original offset, and then adds the
202 	value of <<_foo>>. Note that all 32 bits have to be kept around
203 	somewhere, to cope with carry from bit 15 to bit 16.
204 
205 	One further example is the sparc and the a.out format. The
206 	sparc has a similar problem to the 88k, in that some
207 	instructions don't have room for an entire offset, but on the
208 	sparc the parts are created in odd sized lumps. The designers of
209 	the a.out format chose to not use the data within the section
210 	for storing part of the offset; all the offset is kept within
211 	the reloc. Anything in the data should be ignored.
212 
213 |        save %sp,-112,%sp
214 |        sethi %hi(_foo+0x12345678),%g2
215 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
216 |        ret
217 |        restore
218 
219 	Both relocs contain a pointer to <<foo>>, and the offsets
220 	contain junk.
221 
222 |RELOCATION RECORDS FOR [.text]:
223 |offset   type      value
224 |00000004 HI22      _foo+0x12345678
225 |00000008 LO10      _foo+0x12345678
226 |
227 |00000000 9de3bf90     ; save %sp,-112,%sp
228 |00000004 05000000     ; sethi %hi(_foo+0),%g2
229 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
230 |0000000c 81c7e008     ; ret
231 |00000010 81e80000     ; restore
232 
233 	o <<howto>>
234 
235 	The <<howto>> field can be imagined as a
236 	relocation instruction. It is a pointer to a structure which
237 	contains information on what to do with all of the other
238 	information in the reloc record and data section. A back end
239 	would normally have a relocation instruction set and turn
240 	relocations into pointers to the correct structure on input -
241 	but it would be possible to create each howto field on demand.
242 
243 */
244 
245 /*
246 SUBSUBSECTION
247 	<<enum complain_overflow>>
248 
249 	Indicates what sort of overflow checking should be done when
250 	performing a relocation.
251 
252 CODE_FRAGMENT
253 .
254 .enum complain_overflow
255 .{
256 .  {* Do not complain on overflow.  *}
257 .  complain_overflow_dont,
258 .
259 .  {* Complain if the value overflows when considered as a signed
260 .     number one bit larger than the field.  ie. A bitfield of N bits
261 .     is allowed to represent -2**n to 2**n-1.  *}
262 .  complain_overflow_bitfield,
263 .
264 .  {* Complain if the value overflows when considered as a signed
265 .     number.  *}
266 .  complain_overflow_signed,
267 .
268 .  {* Complain if the value overflows when considered as an
269 .     unsigned number.  *}
270 .  complain_overflow_unsigned
271 .};
272 
273 */
274 
275 /*
276 SUBSUBSECTION
277 	<<reloc_howto_type>>
278 
279 	The <<reloc_howto_type>> is a structure which contains all the
280 	information that libbfd needs to know to tie up a back end's data.
281 
282 CODE_FRAGMENT
283 .struct bfd_symbol;		{* Forward declaration.  *}
284 .
285 .struct reloc_howto_struct
286 .{
287 .  {*  The type field has mainly a documentary use - the back end can
288 .      do what it wants with it, though normally the back end's
289 .      external idea of what a reloc number is stored
290 .      in this field.  For example, a PC relative word relocation
291 .      in a coff environment has the type 023 - because that's
292 .      what the outside world calls a R_PCRWORD reloc.  *}
293 .  unsigned int type;
294 .
295 .  {*  The value the final relocation is shifted right by.  This drops
296 .      unwanted data from the relocation.  *}
297 .  unsigned int rightshift;
298 .
299 .  {*  The size of the item to be relocated.  This is *not* a
300 .      power-of-two measure.  To get the number of bytes operated
301 .      on by a type of relocation, use bfd_get_reloc_size.  *}
302 .  int size;
303 .
304 .  {*  The number of bits in the item to be relocated.  This is used
305 .      when doing overflow checking.  *}
306 .  unsigned int bitsize;
307 .
308 .  {*  The relocation is relative to the field being relocated.  *}
309 .  bfd_boolean pc_relative;
310 .
311 .  {*  The bit position of the reloc value in the destination.
312 .      The relocated value is left shifted by this amount.  *}
313 .  unsigned int bitpos;
314 .
315 .  {* What type of overflow error should be checked for when
316 .     relocating.  *}
317 .  enum complain_overflow complain_on_overflow;
318 .
319 .  {* If this field is non null, then the supplied function is
320 .     called rather than the normal function.  This allows really
321 .     strange relocation methods to be accommodated (e.g., i960 callj
322 .     instructions).  *}
323 .  bfd_reloc_status_type (*special_function)
324 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
325 .     bfd *, char **);
326 .
327 .  {* The textual name of the relocation type.  *}
328 .  char *name;
329 .
330 .  {* Some formats record a relocation addend in the section contents
331 .     rather than with the relocation.  For ELF formats this is the
332 .     distinction between USE_REL and USE_RELA (though the code checks
333 .     for USE_REL == 1/0).  The value of this field is TRUE if the
334 .     addend is recorded with the section contents; when performing a
335 .     partial link (ld -r) the section contents (the data) will be
336 .     modified.  The value of this field is FALSE if addends are
337 .     recorded with the relocation (in arelent.addend); when performing
338 .     a partial link the relocation will be modified.
339 .     All relocations for all ELF USE_RELA targets should set this field
340 .     to FALSE (values of TRUE should be looked on with suspicion).
341 .     However, the converse is not true: not all relocations of all ELF
342 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
343 .     to each particular target.  For relocs that aren't used in partial
344 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
345 .  bfd_boolean partial_inplace;
346 .
347 .  {* src_mask selects the part of the instruction (or data) to be used
348 .     in the relocation sum.  If the target relocations don't have an
349 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
350 .     dst_mask to extract the addend from the section contents.  If
351 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
352 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
353 .     bogus as in those cases the value in the dst_mask part of the
354 .     section contents should be treated as garbage.  *}
355 .  bfd_vma src_mask;
356 .
357 .  {* dst_mask selects which parts of the instruction (or data) are
358 .     replaced with a relocated value.  *}
359 .  bfd_vma dst_mask;
360 .
361 .  {* When some formats create PC relative instructions, they leave
362 .     the value of the pc of the place being relocated in the offset
363 .     slot of the instruction, so that a PC relative relocation can
364 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
365 .     Some formats leave the displacement part of an instruction
366 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
367 .  bfd_boolean pcrel_offset;
368 .};
369 .
370 */
371 
372 /*
373 FUNCTION
374 	The HOWTO Macro
375 
376 DESCRIPTION
377 	The HOWTO define is horrible and will go away.
378 
379 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
380 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
381 
382 DESCRIPTION
383 	And will be replaced with the totally magic way. But for the
384 	moment, we are compatible, so do it this way.
385 
386 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
387 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
388 .	  NAME, FALSE, 0, 0, IN)
389 .
390 
391 DESCRIPTION
392 	This is used to fill in an empty howto entry in an array.
393 
394 .#define EMPTY_HOWTO(C) \
395 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
396 .	  NULL, FALSE, 0, 0, FALSE)
397 .
398 
399 DESCRIPTION
400 	Helper routine to turn a symbol into a relocation value.
401 
402 .#define HOWTO_PREPARE(relocation, symbol)		\
403 .  {							\
404 .    if (symbol != NULL)				\
405 .      {						\
406 .	 if (bfd_is_com_section (symbol->section))	\
407 .	   {						\
408 .	     relocation = 0;				\
409 .	   }						\
410 .	 else						\
411 .	   {						\
412 .	     relocation = symbol->value;		\
413 .	   }						\
414 .      }						\
415 .  }
416 .
417 */
418 
419 /*
420 FUNCTION
421 	bfd_get_reloc_size
422 
423 SYNOPSIS
424 	unsigned int bfd_get_reloc_size (reloc_howto_type *);
425 
426 DESCRIPTION
427 	For a reloc_howto_type that operates on a fixed number of bytes,
428 	this returns the number of bytes operated on.
429  */
430 
431 unsigned int
bfd_get_reloc_size(reloc_howto_type * howto)432 bfd_get_reloc_size (reloc_howto_type *howto)
433 {
434   switch (howto->size)
435     {
436     case 0: return 1;
437     case 1: return 2;
438     case 2: return 4;
439     case 3: return 0;
440     case 4: return 8;
441     case 8: return 16;
442     case -1: return 2;
443     case -2: return 4;
444     default: abort ();
445     }
446 }
447 
448 /*
449 TYPEDEF
450 	arelent_chain
451 
452 DESCRIPTION
453 
454 	How relocs are tied together in an <<asection>>:
455 
456 .typedef struct relent_chain
457 .{
458 .  arelent relent;
459 .  struct relent_chain *next;
460 .}
461 .arelent_chain;
462 .
463 */
464 
465 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
466 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
467 
468 /*
469 FUNCTION
470 	bfd_check_overflow
471 
472 SYNOPSIS
473 	bfd_reloc_status_type bfd_check_overflow
474 	  (enum complain_overflow how,
475 	   unsigned int bitsize,
476 	   unsigned int rightshift,
477 	   unsigned int addrsize,
478 	   bfd_vma relocation);
479 
480 DESCRIPTION
481 	Perform overflow checking on @var{relocation} which has
482 	@var{bitsize} significant bits and will be shifted right by
483 	@var{rightshift} bits, on a machine with addresses containing
484 	@var{addrsize} significant bits.  The result is either of
485 	@code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
486 
487 */
488 
489 bfd_reloc_status_type
bfd_check_overflow(enum complain_overflow how,unsigned int bitsize,unsigned int rightshift,unsigned int addrsize,bfd_vma relocation)490 bfd_check_overflow (enum complain_overflow how,
491 		    unsigned int bitsize,
492 		    unsigned int rightshift,
493 		    unsigned int addrsize,
494 		    bfd_vma relocation)
495 {
496   bfd_vma fieldmask, addrmask, signmask, ss, a;
497   bfd_reloc_status_type flag = bfd_reloc_ok;
498 
499   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
500      we'll be permissive: extra bits in the field mask will
501      automatically extend the address mask for purposes of the
502      overflow check.  */
503   fieldmask = N_ONES (bitsize);
504   signmask = ~fieldmask;
505   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
506   a = (relocation & addrmask) >> rightshift;
507 
508   switch (how)
509     {
510     case complain_overflow_dont:
511       break;
512 
513     case complain_overflow_signed:
514       /* If any sign bits are set, all sign bits must be set.  That
515 	 is, A must be a valid negative address after shifting.  */
516       signmask = ~ (fieldmask >> 1);
517       /* Fall thru */
518 
519     case complain_overflow_bitfield:
520       /* Bitfields are sometimes signed, sometimes unsigned.  We
521 	 explicitly allow an address wrap too, which means a bitfield
522 	 of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
523 	 if the value has some, but not all, bits set outside the
524 	 field.  */
525       ss = a & signmask;
526       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
527 	flag = bfd_reloc_overflow;
528       break;
529 
530     case complain_overflow_unsigned:
531       /* We have an overflow if the address does not fit in the field.  */
532       if ((a & signmask) != 0)
533 	flag = bfd_reloc_overflow;
534       break;
535 
536     default:
537       abort ();
538     }
539 
540   return flag;
541 }
542 
543 /*
544 FUNCTION
545 	bfd_reloc_offset_in_range
546 
547 SYNOPSIS
548 	bfd_boolean bfd_reloc_offset_in_range
549 	  (reloc_howto_type *howto,
550 	   bfd *abfd,
551 	   asection *section,
552 	   bfd_size_type offset);
553 
554 DESCRIPTION
555 	Returns TRUE if the reloc described by @var{HOWTO} can be
556 	applied at @var{OFFSET} octets in @var{SECTION}.
557 
558 */
559 
560 /* HOWTO describes a relocation, at offset OCTET.  Return whether the
561    relocation field is within SECTION of ABFD.  */
562 
563 bfd_boolean
bfd_reloc_offset_in_range(reloc_howto_type * howto,bfd * abfd,asection * section,bfd_size_type octet)564 bfd_reloc_offset_in_range (reloc_howto_type *howto,
565 			   bfd *abfd,
566 			   asection *section,
567 			   bfd_size_type octet)
568 {
569   bfd_size_type octet_end = bfd_get_section_limit_octets (abfd, section);
570   bfd_size_type reloc_size = bfd_get_reloc_size (howto);
571 
572   /* The reloc field must be contained entirely within the section.
573      Allow zero length fields (marker relocs or NONE relocs where no
574      relocation will be performed) at the end of the section.  */
575   return octet <= octet_end && octet + reloc_size <= octet_end;
576 }
577 
578 /*
579 FUNCTION
580 	bfd_perform_relocation
581 
582 SYNOPSIS
583 	bfd_reloc_status_type bfd_perform_relocation
584 	  (bfd *abfd,
585 	   arelent *reloc_entry,
586 	   void *data,
587 	   asection *input_section,
588 	   bfd *output_bfd,
589 	   char **error_message);
590 
591 DESCRIPTION
592 	If @var{output_bfd} is supplied to this function, the
593 	generated image will be relocatable; the relocations are
594 	copied to the output file after they have been changed to
595 	reflect the new state of the world. There are two ways of
596 	reflecting the results of partial linkage in an output file:
597 	by modifying the output data in place, and by modifying the
598 	relocation record.  Some native formats (e.g., basic a.out and
599 	basic coff) have no way of specifying an addend in the
600 	relocation type, so the addend has to go in the output data.
601 	This is no big deal since in these formats the output data
602 	slot will always be big enough for the addend. Complex reloc
603 	types with addends were invented to solve just this problem.
604 	The @var{error_message} argument is set to an error message if
605 	this return @code{bfd_reloc_dangerous}.
606 
607 */
608 
609 bfd_reloc_status_type
bfd_perform_relocation(bfd * abfd,arelent * reloc_entry,void * data,asection * input_section,bfd * output_bfd,char ** error_message)610 bfd_perform_relocation (bfd *abfd,
611 			arelent *reloc_entry,
612 			void *data,
613 			asection *input_section,
614 			bfd *output_bfd,
615 			char **error_message)
616 {
617   bfd_vma relocation;
618   bfd_reloc_status_type flag = bfd_reloc_ok;
619   bfd_size_type octets;
620   bfd_vma output_base = 0;
621   reloc_howto_type *howto = reloc_entry->howto;
622   asection *reloc_target_output_section;
623   asymbol *symbol;
624 
625   symbol = *(reloc_entry->sym_ptr_ptr);
626 
627   /* If we are not producing relocatable output, return an error if
628      the symbol is not defined.  An undefined weak symbol is
629      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
630   if (bfd_is_und_section (symbol->section)
631       && (symbol->flags & BSF_WEAK) == 0
632       && output_bfd == NULL)
633     flag = bfd_reloc_undefined;
634 
635   /* If there is a function supplied to handle this relocation type,
636      call it.  It'll return `bfd_reloc_continue' if further processing
637      can be done.  */
638   if (howto && howto->special_function)
639     {
640       bfd_reloc_status_type cont;
641 
642       /* Note - we do not call bfd_reloc_offset_in_range here as the
643 	 reloc_entry->address field might actually be valid for the
644 	 backend concerned.  It is up to the special_function itself
645 	 to call bfd_reloc_offset_in_range if needed.  */
646       cont = howto->special_function (abfd, reloc_entry, symbol, data,
647 				      input_section, output_bfd,
648 				      error_message);
649       if (cont != bfd_reloc_continue)
650 	return cont;
651     }
652 
653   if (bfd_is_abs_section (symbol->section)
654       && output_bfd != NULL)
655     {
656       reloc_entry->address += input_section->output_offset;
657       return bfd_reloc_ok;
658     }
659 
660   /* PR 17512: file: 0f67f69d.  */
661   if (howto == NULL)
662     return bfd_reloc_undefined;
663 
664   /* Is the address of the relocation really within the section?  */
665   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
666   if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
667     return bfd_reloc_outofrange;
668 
669   /* Work out which section the relocation is targeted at and the
670      initial relocation command value.  */
671 
672   /* Get symbol value.  (Common symbols are special.)  */
673   if (bfd_is_com_section (symbol->section))
674     relocation = 0;
675   else
676     relocation = symbol->value;
677 
678   reloc_target_output_section = symbol->section->output_section;
679 
680   /* Convert input-section-relative symbol value to absolute.  */
681   if ((output_bfd && ! howto->partial_inplace)
682       || reloc_target_output_section == NULL)
683     output_base = 0;
684   else
685     output_base = reloc_target_output_section->vma;
686 
687   relocation += output_base + symbol->section->output_offset;
688 
689   /* Add in supplied addend.  */
690   relocation += reloc_entry->addend;
691 
692   /* Here the variable relocation holds the final address of the
693      symbol we are relocating against, plus any addend.  */
694 
695   if (howto->pc_relative)
696     {
697       /* This is a PC relative relocation.  We want to set RELOCATION
698 	 to the distance between the address of the symbol and the
699 	 location.  RELOCATION is already the address of the symbol.
700 
701 	 We start by subtracting the address of the section containing
702 	 the location.
703 
704 	 If pcrel_offset is set, we must further subtract the position
705 	 of the location within the section.  Some targets arrange for
706 	 the addend to be the negative of the position of the location
707 	 within the section; for example, i386-aout does this.  For
708 	 i386-aout, pcrel_offset is FALSE.  Some other targets do not
709 	 include the position of the location; for example, m88kbcs,
710 	 or ELF.  For those targets, pcrel_offset is TRUE.
711 
712 	 If we are producing relocatable output, then we must ensure
713 	 that this reloc will be correctly computed when the final
714 	 relocation is done.  If pcrel_offset is FALSE we want to wind
715 	 up with the negative of the location within the section,
716 	 which means we must adjust the existing addend by the change
717 	 in the location within the section.  If pcrel_offset is TRUE
718 	 we do not want to adjust the existing addend at all.
719 
720 	 FIXME: This seems logical to me, but for the case of
721 	 producing relocatable output it is not what the code
722 	 actually does.  I don't want to change it, because it seems
723 	 far too likely that something will break.  */
724 
725       relocation -=
726 	input_section->output_section->vma + input_section->output_offset;
727 
728       if (howto->pcrel_offset)
729 	relocation -= reloc_entry->address;
730     }
731 
732   if (output_bfd != NULL)
733     {
734       if (! howto->partial_inplace)
735 	{
736 	  /* This is a partial relocation, and we want to apply the relocation
737 	     to the reloc entry rather than the raw data. Modify the reloc
738 	     inplace to reflect what we now know.  */
739 	  reloc_entry->addend = relocation;
740 	  reloc_entry->address += input_section->output_offset;
741 	  return flag;
742 	}
743       else
744 	{
745 	  /* This is a partial relocation, but inplace, so modify the
746 	     reloc record a bit.
747 
748 	     If we've relocated with a symbol with a section, change
749 	     into a ref to the section belonging to the symbol.  */
750 
751 	  reloc_entry->address += input_section->output_offset;
752 
753 	  /* WTF?? */
754 	  if (abfd->xvec->flavour == bfd_target_coff_flavour
755 	      && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
756 	      && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
757 	    {
758 	      /* For m68k-coff, the addend was being subtracted twice during
759 		 relocation with -r.  Removing the line below this comment
760 		 fixes that problem; see PR 2953.
761 
762 However, Ian wrote the following, regarding removing the line below,
763 which explains why it is still enabled:  --djm
764 
765 If you put a patch like that into BFD you need to check all the COFF
766 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
767 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
768 problem in a different way.  There may very well be a reason that the
769 code works as it does.
770 
771 Hmmm.  The first obvious point is that bfd_perform_relocation should
772 not have any tests that depend upon the flavour.  It's seem like
773 entirely the wrong place for such a thing.  The second obvious point
774 is that the current code ignores the reloc addend when producing
775 relocatable output for COFF.  That's peculiar.  In fact, I really
776 have no idea what the point of the line you want to remove is.
777 
778 A typical COFF reloc subtracts the old value of the symbol and adds in
779 the new value to the location in the object file (if it's a pc
780 relative reloc it adds the difference between the symbol value and the
781 location).  When relocating we need to preserve that property.
782 
783 BFD handles this by setting the addend to the negative of the old
784 value of the symbol.  Unfortunately it handles common symbols in a
785 non-standard way (it doesn't subtract the old value) but that's a
786 different story (we can't change it without losing backward
787 compatibility with old object files) (coff-i386 does subtract the old
788 value, to be compatible with existing coff-i386 targets, like SCO).
789 
790 So everything works fine when not producing relocatable output.  When
791 we are producing relocatable output, logically we should do exactly
792 what we do when not producing relocatable output.  Therefore, your
793 patch is correct.  In fact, it should probably always just set
794 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
795 add the value into the object file.  This won't hurt the COFF code,
796 which doesn't use the addend; I'm not sure what it will do to other
797 formats (the thing to check for would be whether any formats both use
798 the addend and set partial_inplace).
799 
800 When I wanted to make coff-i386 produce relocatable output, I ran
801 into the problem that you are running into: I wanted to remove that
802 line.  Rather than risk it, I made the coff-i386 relocs use a special
803 function; it's coff_i386_reloc in coff-i386.c.  The function
804 specifically adds the addend field into the object file, knowing that
805 bfd_perform_relocation is not going to.  If you remove that line, then
806 coff-i386.c will wind up adding the addend field in twice.  It's
807 trivial to fix; it just needs to be done.
808 
809 The problem with removing the line is just that it may break some
810 working code.  With BFD it's hard to be sure of anything.  The right
811 way to deal with this is simply to build and test at least all the
812 supported COFF targets.  It should be straightforward if time and disk
813 space consuming.  For each target:
814     1) build the linker
815     2) generate some executable, and link it using -r (I would
816        probably use paranoia.o and link against newlib/libc.a, which
817        for all the supported targets would be available in
818        /usr/cygnus/progressive/H-host/target/lib/libc.a).
819     3) make the change to reloc.c
820     4) rebuild the linker
821     5) repeat step 2
822     6) if the resulting object files are the same, you have at least
823        made it no worse
824     7) if they are different you have to figure out which version is
825        right
826 */
827 	      relocation -= reloc_entry->addend;
828 	      reloc_entry->addend = 0;
829 	    }
830 	  else
831 	    {
832 	      reloc_entry->addend = relocation;
833 	    }
834 	}
835     }
836 
837   /* FIXME: This overflow checking is incomplete, because the value
838      might have overflowed before we get here.  For a correct check we
839      need to compute the value in a size larger than bitsize, but we
840      can't reasonably do that for a reloc the same size as a host
841      machine word.
842      FIXME: We should also do overflow checking on the result after
843      adding in the value contained in the object file.  */
844   if (howto->complain_on_overflow != complain_overflow_dont
845       && flag == bfd_reloc_ok)
846     flag = bfd_check_overflow (howto->complain_on_overflow,
847 			       howto->bitsize,
848 			       howto->rightshift,
849 			       bfd_arch_bits_per_address (abfd),
850 			       relocation);
851 
852   /* Either we are relocating all the way, or we don't want to apply
853      the relocation to the reloc entry (probably because there isn't
854      any room in the output format to describe addends to relocs).  */
855 
856   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
857      (OSF version 1.3, compiler version 3.11).  It miscompiles the
858      following program:
859 
860      struct str
861      {
862        unsigned int i0;
863      } s = { 0 };
864 
865      int
866      main ()
867      {
868        unsigned long x;
869 
870        x = 0x100000000;
871        x <<= (unsigned long) s.i0;
872        if (x == 0)
873 	 printf ("failed\n");
874        else
875 	 printf ("succeeded (%lx)\n", x);
876      }
877      */
878 
879   relocation >>= (bfd_vma) howto->rightshift;
880 
881   /* Shift everything up to where it's going to be used.  */
882   relocation <<= (bfd_vma) howto->bitpos;
883 
884   /* Wait for the day when all have the mask in them.  */
885 
886   /* What we do:
887      i instruction to be left alone
888      o offset within instruction
889      r relocation offset to apply
890      S src mask
891      D dst mask
892      N ~dst mask
893      A part 1
894      B part 2
895      R result
896 
897      Do this:
898      ((	 i i i i i o o o o o  from bfd_get<size>
899      and	   S S S S S) to get the size offset we want
900      +	 r r r r r r r r r r) to get the final value to place
901      and	   D D D D D  to chop to right size
902      -----------------------
903      =		   A A A A A
904      And this:
905      (	 i i i i i o o o o o  from bfd_get<size>
906      and N N N N N	    ) get instruction
907      -----------------------
908      =	 B B B B B
909 
910      And then:
911      (	 B B B B B
912      or		   A A A A A)
913      -----------------------
914      =	 R R R R R R R R R R  put into bfd_put<size>
915      */
916 
917 #define DOIT(x) \
918   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
919 
920   switch (howto->size)
921     {
922     case 0:
923       {
924 	char x = bfd_get_8 (abfd, (char *) data + octets);
925 	DOIT (x);
926 	bfd_put_8 (abfd, x, (unsigned char *) data + octets);
927       }
928       break;
929 
930     case 1:
931       {
932 	short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
933 	DOIT (x);
934 	bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
935       }
936       break;
937     case 2:
938       {
939 	long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
940 	DOIT (x);
941 	bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
942       }
943       break;
944     case -2:
945       {
946 	long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
947 	relocation = -relocation;
948 	DOIT (x);
949 	bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
950       }
951       break;
952 
953     case -1:
954       {
955 	long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
956 	relocation = -relocation;
957 	DOIT (x);
958 	bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
959       }
960       break;
961 
962     case 3:
963       /* Do nothing */
964       break;
965 
966     case 4:
967 #ifdef BFD64
968       {
969 	bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
970 	DOIT (x);
971 	bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
972       }
973 #else
974       abort ();
975 #endif
976       break;
977     default:
978       return bfd_reloc_other;
979     }
980 
981   return flag;
982 }
983 
984 /*
985 FUNCTION
986 	bfd_install_relocation
987 
988 SYNOPSIS
989 	bfd_reloc_status_type bfd_install_relocation
990 	  (bfd *abfd,
991 	   arelent *reloc_entry,
992 	   void *data, bfd_vma data_start,
993 	   asection *input_section,
994 	   char **error_message);
995 
996 DESCRIPTION
997 	This looks remarkably like <<bfd_perform_relocation>>, except it
998 	does not expect that the section contents have been filled in.
999 	I.e., it's suitable for use when creating, rather than applying
1000 	a relocation.
1001 
1002 	For now, this function should be considered reserved for the
1003 	assembler.
1004 */
1005 
1006 bfd_reloc_status_type
bfd_install_relocation(bfd * abfd,arelent * reloc_entry,void * data_start,bfd_vma data_start_offset,asection * input_section,char ** error_message)1007 bfd_install_relocation (bfd *abfd,
1008 			arelent *reloc_entry,
1009 			void *data_start,
1010 			bfd_vma data_start_offset,
1011 			asection *input_section,
1012 			char **error_message)
1013 {
1014   bfd_vma relocation;
1015   bfd_reloc_status_type flag = bfd_reloc_ok;
1016   bfd_size_type octets;
1017   bfd_vma output_base = 0;
1018   reloc_howto_type *howto = reloc_entry->howto;
1019   asection *reloc_target_output_section;
1020   asymbol *symbol;
1021   bfd_byte *data;
1022 
1023   symbol = *(reloc_entry->sym_ptr_ptr);
1024 
1025   /* If there is a function supplied to handle this relocation type,
1026      call it.  It'll return `bfd_reloc_continue' if further processing
1027      can be done.  */
1028   if (howto && howto->special_function)
1029     {
1030       bfd_reloc_status_type cont;
1031 
1032       /* Note - we do not call bfd_reloc_offset_in_range here as the
1033 	 reloc_entry->address field might actually be valid for the
1034 	 backend concerned.  It is up to the special_function itself
1035 	 to call bfd_reloc_offset_in_range if needed.  */
1036       /* XXX - The special_function calls haven't been fixed up to deal
1037 	 with creating new relocations and section contents.  */
1038       cont = howto->special_function (abfd, reloc_entry, symbol,
1039 				      /* XXX - Non-portable! */
1040 				      ((bfd_byte *) data_start
1041 				       - data_start_offset),
1042 				      input_section, abfd, error_message);
1043       if (cont != bfd_reloc_continue)
1044 	return cont;
1045     }
1046 
1047   if (bfd_is_abs_section (symbol->section))
1048     {
1049       reloc_entry->address += input_section->output_offset;
1050       return bfd_reloc_ok;
1051     }
1052 
1053   /* No need to check for howto != NULL if !bfd_is_abs_section as
1054      it will have been checked in `bfd_perform_relocation already'.  */
1055 
1056   /* Is the address of the relocation really within the section?  */
1057   octets = reloc_entry->address * bfd_octets_per_byte (abfd);
1058   if (!bfd_reloc_offset_in_range (howto, abfd, input_section, octets))
1059     return bfd_reloc_outofrange;
1060 
1061   /* Work out which section the relocation is targeted at and the
1062      initial relocation command value.  */
1063 
1064   /* Get symbol value.  (Common symbols are special.)  */
1065   if (bfd_is_com_section (symbol->section))
1066     relocation = 0;
1067   else
1068     relocation = symbol->value;
1069 
1070   reloc_target_output_section = symbol->section->output_section;
1071 
1072   /* Convert input-section-relative symbol value to absolute.  */
1073   if (! howto->partial_inplace)
1074     output_base = 0;
1075   else
1076     output_base = reloc_target_output_section->vma;
1077 
1078   relocation += output_base + symbol->section->output_offset;
1079 
1080   /* Add in supplied addend.  */
1081   relocation += reloc_entry->addend;
1082 
1083   /* Here the variable relocation holds the final address of the
1084      symbol we are relocating against, plus any addend.  */
1085 
1086   if (howto->pc_relative)
1087     {
1088       /* This is a PC relative relocation.  We want to set RELOCATION
1089 	 to the distance between the address of the symbol and the
1090 	 location.  RELOCATION is already the address of the symbol.
1091 
1092 	 We start by subtracting the address of the section containing
1093 	 the location.
1094 
1095 	 If pcrel_offset is set, we must further subtract the position
1096 	 of the location within the section.  Some targets arrange for
1097 	 the addend to be the negative of the position of the location
1098 	 within the section; for example, i386-aout does this.  For
1099 	 i386-aout, pcrel_offset is FALSE.  Some other targets do not
1100 	 include the position of the location; for example, m88kbcs,
1101 	 or ELF.  For those targets, pcrel_offset is TRUE.
1102 
1103 	 If we are producing relocatable output, then we must ensure
1104 	 that this reloc will be correctly computed when the final
1105 	 relocation is done.  If pcrel_offset is FALSE we want to wind
1106 	 up with the negative of the location within the section,
1107 	 which means we must adjust the existing addend by the change
1108 	 in the location within the section.  If pcrel_offset is TRUE
1109 	 we do not want to adjust the existing addend at all.
1110 
1111 	 FIXME: This seems logical to me, but for the case of
1112 	 producing relocatable output it is not what the code
1113 	 actually does.  I don't want to change it, because it seems
1114 	 far too likely that something will break.  */
1115 
1116       relocation -=
1117 	input_section->output_section->vma + input_section->output_offset;
1118 
1119       if (howto->pcrel_offset && howto->partial_inplace)
1120 	relocation -= reloc_entry->address;
1121     }
1122 
1123   if (! howto->partial_inplace)
1124     {
1125       /* This is a partial relocation, and we want to apply the relocation
1126 	 to the reloc entry rather than the raw data. Modify the reloc
1127 	 inplace to reflect what we now know.  */
1128       reloc_entry->addend = relocation;
1129       reloc_entry->address += input_section->output_offset;
1130       return flag;
1131     }
1132   else
1133     {
1134       /* This is a partial relocation, but inplace, so modify the
1135 	 reloc record a bit.
1136 
1137 	 If we've relocated with a symbol with a section, change
1138 	 into a ref to the section belonging to the symbol.  */
1139       reloc_entry->address += input_section->output_offset;
1140 
1141       /* WTF?? */
1142       if (abfd->xvec->flavour == bfd_target_coff_flavour
1143 	  && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1144 	  && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1145 	{
1146 
1147 	  /* For m68k-coff, the addend was being subtracted twice during
1148 	     relocation with -r.  Removing the line below this comment
1149 	     fixes that problem; see PR 2953.
1150 
1151 However, Ian wrote the following, regarding removing the line below,
1152 which explains why it is still enabled:  --djm
1153 
1154 If you put a patch like that into BFD you need to check all the COFF
1155 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1156 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1157 problem in a different way.  There may very well be a reason that the
1158 code works as it does.
1159 
1160 Hmmm.  The first obvious point is that bfd_install_relocation should
1161 not have any tests that depend upon the flavour.  It's seem like
1162 entirely the wrong place for such a thing.  The second obvious point
1163 is that the current code ignores the reloc addend when producing
1164 relocatable output for COFF.  That's peculiar.  In fact, I really
1165 have no idea what the point of the line you want to remove is.
1166 
1167 A typical COFF reloc subtracts the old value of the symbol and adds in
1168 the new value to the location in the object file (if it's a pc
1169 relative reloc it adds the difference between the symbol value and the
1170 location).  When relocating we need to preserve that property.
1171 
1172 BFD handles this by setting the addend to the negative of the old
1173 value of the symbol.  Unfortunately it handles common symbols in a
1174 non-standard way (it doesn't subtract the old value) but that's a
1175 different story (we can't change it without losing backward
1176 compatibility with old object files) (coff-i386 does subtract the old
1177 value, to be compatible with existing coff-i386 targets, like SCO).
1178 
1179 So everything works fine when not producing relocatable output.  When
1180 we are producing relocatable output, logically we should do exactly
1181 what we do when not producing relocatable output.  Therefore, your
1182 patch is correct.  In fact, it should probably always just set
1183 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1184 add the value into the object file.  This won't hurt the COFF code,
1185 which doesn't use the addend; I'm not sure what it will do to other
1186 formats (the thing to check for would be whether any formats both use
1187 the addend and set partial_inplace).
1188 
1189 When I wanted to make coff-i386 produce relocatable output, I ran
1190 into the problem that you are running into: I wanted to remove that
1191 line.  Rather than risk it, I made the coff-i386 relocs use a special
1192 function; it's coff_i386_reloc in coff-i386.c.  The function
1193 specifically adds the addend field into the object file, knowing that
1194 bfd_install_relocation is not going to.  If you remove that line, then
1195 coff-i386.c will wind up adding the addend field in twice.  It's
1196 trivial to fix; it just needs to be done.
1197 
1198 The problem with removing the line is just that it may break some
1199 working code.  With BFD it's hard to be sure of anything.  The right
1200 way to deal with this is simply to build and test at least all the
1201 supported COFF targets.  It should be straightforward if time and disk
1202 space consuming.  For each target:
1203     1) build the linker
1204     2) generate some executable, and link it using -r (I would
1205        probably use paranoia.o and link against newlib/libc.a, which
1206        for all the supported targets would be available in
1207        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1208     3) make the change to reloc.c
1209     4) rebuild the linker
1210     5) repeat step 2
1211     6) if the resulting object files are the same, you have at least
1212        made it no worse
1213     7) if they are different you have to figure out which version is
1214        right.  */
1215 	  relocation -= reloc_entry->addend;
1216 	  /* FIXME: There should be no target specific code here...  */
1217 	  if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1218 	    reloc_entry->addend = 0;
1219 	}
1220       else
1221 	{
1222 	  reloc_entry->addend = relocation;
1223 	}
1224     }
1225 
1226   /* FIXME: This overflow checking is incomplete, because the value
1227      might have overflowed before we get here.  For a correct check we
1228      need to compute the value in a size larger than bitsize, but we
1229      can't reasonably do that for a reloc the same size as a host
1230      machine word.
1231      FIXME: We should also do overflow checking on the result after
1232      adding in the value contained in the object file.  */
1233   if (howto->complain_on_overflow != complain_overflow_dont)
1234     flag = bfd_check_overflow (howto->complain_on_overflow,
1235 			       howto->bitsize,
1236 			       howto->rightshift,
1237 			       bfd_arch_bits_per_address (abfd),
1238 			       relocation);
1239 
1240   /* Either we are relocating all the way, or we don't want to apply
1241      the relocation to the reloc entry (probably because there isn't
1242      any room in the output format to describe addends to relocs).  */
1243 
1244   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1245      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1246      following program:
1247 
1248      struct str
1249      {
1250        unsigned int i0;
1251      } s = { 0 };
1252 
1253      int
1254      main ()
1255      {
1256        unsigned long x;
1257 
1258        x = 0x100000000;
1259        x <<= (unsigned long) s.i0;
1260        if (x == 0)
1261 	 printf ("failed\n");
1262        else
1263 	 printf ("succeeded (%lx)\n", x);
1264      }
1265      */
1266 
1267   relocation >>= (bfd_vma) howto->rightshift;
1268 
1269   /* Shift everything up to where it's going to be used.  */
1270   relocation <<= (bfd_vma) howto->bitpos;
1271 
1272   /* Wait for the day when all have the mask in them.  */
1273 
1274   /* What we do:
1275      i instruction to be left alone
1276      o offset within instruction
1277      r relocation offset to apply
1278      S src mask
1279      D dst mask
1280      N ~dst mask
1281      A part 1
1282      B part 2
1283      R result
1284 
1285      Do this:
1286      ((	 i i i i i o o o o o  from bfd_get<size>
1287      and	   S S S S S) to get the size offset we want
1288      +	 r r r r r r r r r r) to get the final value to place
1289      and	   D D D D D  to chop to right size
1290      -----------------------
1291      =		   A A A A A
1292      And this:
1293      (	 i i i i i o o o o o  from bfd_get<size>
1294      and N N N N N	    ) get instruction
1295      -----------------------
1296      =	 B B B B B
1297 
1298      And then:
1299      (	 B B B B B
1300      or		   A A A A A)
1301      -----------------------
1302      =	 R R R R R R R R R R  put into bfd_put<size>
1303      */
1304 
1305 #define DOIT(x) \
1306   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1307 
1308   data = (bfd_byte *) data_start + (octets - data_start_offset);
1309 
1310   switch (howto->size)
1311     {
1312     case 0:
1313       {
1314 	char x = bfd_get_8 (abfd, data);
1315 	DOIT (x);
1316 	bfd_put_8 (abfd, x, data);
1317       }
1318       break;
1319 
1320     case 1:
1321       {
1322 	short x = bfd_get_16 (abfd, data);
1323 	DOIT (x);
1324 	bfd_put_16 (abfd, (bfd_vma) x, data);
1325       }
1326       break;
1327     case 2:
1328       {
1329 	long x = bfd_get_32 (abfd, data);
1330 	DOIT (x);
1331 	bfd_put_32 (abfd, (bfd_vma) x, data);
1332       }
1333       break;
1334     case -2:
1335       {
1336 	long x = bfd_get_32 (abfd, data);
1337 	relocation = -relocation;
1338 	DOIT (x);
1339 	bfd_put_32 (abfd, (bfd_vma) x, data);
1340       }
1341       break;
1342 
1343     case 3:
1344       /* Do nothing */
1345       break;
1346 
1347     case 4:
1348       {
1349 	bfd_vma x = bfd_get_64 (abfd, data);
1350 	DOIT (x);
1351 	bfd_put_64 (abfd, x, data);
1352       }
1353       break;
1354     default:
1355       return bfd_reloc_other;
1356     }
1357 
1358   return flag;
1359 }
1360 
1361 /* This relocation routine is used by some of the backend linkers.
1362    They do not construct asymbol or arelent structures, so there is no
1363    reason for them to use bfd_perform_relocation.  Also,
1364    bfd_perform_relocation is so hacked up it is easier to write a new
1365    function than to try to deal with it.
1366 
1367    This routine does a final relocation.  Whether it is useful for a
1368    relocatable link depends upon how the object format defines
1369    relocations.
1370 
1371    FIXME: This routine ignores any special_function in the HOWTO,
1372    since the existing special_function values have been written for
1373    bfd_perform_relocation.
1374 
1375    HOWTO is the reloc howto information.
1376    INPUT_BFD is the BFD which the reloc applies to.
1377    INPUT_SECTION is the section which the reloc applies to.
1378    CONTENTS is the contents of the section.
1379    ADDRESS is the address of the reloc within INPUT_SECTION.
1380    VALUE is the value of the symbol the reloc refers to.
1381    ADDEND is the addend of the reloc.  */
1382 
1383 bfd_reloc_status_type
_bfd_final_link_relocate(reloc_howto_type * howto,bfd * input_bfd,asection * input_section,bfd_byte * contents,bfd_vma address,bfd_vma value,bfd_vma addend)1384 _bfd_final_link_relocate (reloc_howto_type *howto,
1385 			  bfd *input_bfd,
1386 			  asection *input_section,
1387 			  bfd_byte *contents,
1388 			  bfd_vma address,
1389 			  bfd_vma value,
1390 			  bfd_vma addend)
1391 {
1392   bfd_vma relocation;
1393   bfd_size_type octets = address * bfd_octets_per_byte (input_bfd);
1394 
1395   /* Sanity check the address.  */
1396   if (!bfd_reloc_offset_in_range (howto, input_bfd, input_section, octets))
1397     return bfd_reloc_outofrange;
1398 
1399   /* This function assumes that we are dealing with a basic relocation
1400      against a symbol.  We want to compute the value of the symbol to
1401      relocate to.  This is just VALUE, the value of the symbol, plus
1402      ADDEND, any addend associated with the reloc.  */
1403   relocation = value + addend;
1404 
1405   /* If the relocation is PC relative, we want to set RELOCATION to
1406      the distance between the symbol (currently in RELOCATION) and the
1407      location we are relocating.  Some targets (e.g., i386-aout)
1408      arrange for the contents of the section to be the negative of the
1409      offset of the location within the section; for such targets
1410      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1411      simply leave the contents of the section as zero; for such
1412      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1413      need to subtract out the offset of the location within the
1414      section (which is just ADDRESS).  */
1415   if (howto->pc_relative)
1416     {
1417       relocation -= (input_section->output_section->vma
1418 		     + input_section->output_offset);
1419       if (howto->pcrel_offset)
1420 	relocation -= address;
1421     }
1422 
1423   return _bfd_relocate_contents (howto, input_bfd, relocation,
1424 				 contents
1425 				 + address * bfd_octets_per_byte (input_bfd));
1426 }
1427 
1428 /* Relocate a given location using a given value and howto.  */
1429 
1430 bfd_reloc_status_type
_bfd_relocate_contents(reloc_howto_type * howto,bfd * input_bfd,bfd_vma relocation,bfd_byte * location)1431 _bfd_relocate_contents (reloc_howto_type *howto,
1432 			bfd *input_bfd,
1433 			bfd_vma relocation,
1434 			bfd_byte *location)
1435 {
1436   int size;
1437   bfd_vma x = 0;
1438   bfd_reloc_status_type flag;
1439   unsigned int rightshift = howto->rightshift;
1440   unsigned int bitpos = howto->bitpos;
1441 
1442   /* If the size is negative, negate RELOCATION.  This isn't very
1443      general.  */
1444   if (howto->size < 0)
1445     relocation = -relocation;
1446 
1447   /* Get the value we are going to relocate.  */
1448   size = bfd_get_reloc_size (howto);
1449   switch (size)
1450     {
1451     default:
1452       abort ();
1453     case 0:
1454       return bfd_reloc_ok;
1455     case 1:
1456       x = bfd_get_8 (input_bfd, location);
1457       break;
1458     case 2:
1459       x = bfd_get_16 (input_bfd, location);
1460       break;
1461     case 4:
1462       x = bfd_get_32 (input_bfd, location);
1463       break;
1464     case 8:
1465 #ifdef BFD64
1466       x = bfd_get_64 (input_bfd, location);
1467 #else
1468       abort ();
1469 #endif
1470       break;
1471     }
1472 
1473   /* Check for overflow.  FIXME: We may drop bits during the addition
1474      which we don't check for.  We must either check at every single
1475      operation, which would be tedious, or we must do the computations
1476      in a type larger than bfd_vma, which would be inefficient.  */
1477   flag = bfd_reloc_ok;
1478   if (howto->complain_on_overflow != complain_overflow_dont)
1479     {
1480       bfd_vma addrmask, fieldmask, signmask, ss;
1481       bfd_vma a, b, sum;
1482 
1483       /* Get the values to be added together.  For signed and unsigned
1484 	 relocations, we assume that all values should be truncated to
1485 	 the size of an address.  For bitfields, all the bits matter.
1486 	 See also bfd_check_overflow.  */
1487       fieldmask = N_ONES (howto->bitsize);
1488       signmask = ~fieldmask;
1489       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1490 		  | (fieldmask << rightshift));
1491       a = (relocation & addrmask) >> rightshift;
1492       b = (x & howto->src_mask & addrmask) >> bitpos;
1493       addrmask >>= rightshift;
1494 
1495       switch (howto->complain_on_overflow)
1496 	{
1497 	case complain_overflow_signed:
1498 	  /* If any sign bits are set, all sign bits must be set.
1499 	     That is, A must be a valid negative address after
1500 	     shifting.  */
1501 	  signmask = ~(fieldmask >> 1);
1502 	  /* Fall thru */
1503 
1504 	case complain_overflow_bitfield:
1505 	  /* Much like the signed check, but for a field one bit
1506 	     wider.  We allow a bitfield to represent numbers in the
1507 	     range -2**n to 2**n-1, where n is the number of bits in the
1508 	     field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1509 	     can't overflow, which is exactly what we want.  */
1510 	  ss = a & signmask;
1511 	  if (ss != 0 && ss != (addrmask & signmask))
1512 	    flag = bfd_reloc_overflow;
1513 
1514 	  /* We only need this next bit of code if the sign bit of B
1515 	     is below the sign bit of A.  This would only happen if
1516 	     SRC_MASK had fewer bits than BITSIZE.  Note that if
1517 	     SRC_MASK has more bits than BITSIZE, we can get into
1518 	     trouble; we would need to verify that B is in range, as
1519 	     we do for A above.  */
1520 	  ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1521 	  ss >>= bitpos;
1522 
1523 	  /* Set all the bits above the sign bit.  */
1524 	  b = (b ^ ss) - ss;
1525 
1526 	  /* Now we can do the addition.  */
1527 	  sum = a + b;
1528 
1529 	  /* See if the result has the correct sign.  Bits above the
1530 	     sign bit are junk now; ignore them.  If the sum is
1531 	     positive, make sure we did not have all negative inputs;
1532 	     if the sum is negative, make sure we did not have all
1533 	     positive inputs.  The test below looks only at the sign
1534 	     bits, and it really just
1535 		 SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1536 
1537 	     We mask with addrmask here to explicitly allow an address
1538 	     wrap-around.  The Linux kernel relies on it, and it is
1539 	     the only way to write assembler code which can run when
1540 	     loaded at a location 0x80000000 away from the location at
1541 	     which it is linked.  */
1542 	  if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1543 	    flag = bfd_reloc_overflow;
1544 	  break;
1545 
1546 	case complain_overflow_unsigned:
1547 	  /* Checking for an unsigned overflow is relatively easy:
1548 	     trim the addresses and add, and trim the result as well.
1549 	     Overflow is normally indicated when the result does not
1550 	     fit in the field.  However, we also need to consider the
1551 	     case when, e.g., fieldmask is 0x7fffffff or smaller, an
1552 	     input is 0x80000000, and bfd_vma is only 32 bits; then we
1553 	     will get sum == 0, but there is an overflow, since the
1554 	     inputs did not fit in the field.  Instead of doing a
1555 	     separate test, we can check for this by or-ing in the
1556 	     operands when testing for the sum overflowing its final
1557 	     field.  */
1558 	  sum = (a + b) & addrmask;
1559 	  if ((a | b | sum) & signmask)
1560 	    flag = bfd_reloc_overflow;
1561 	  break;
1562 
1563 	default:
1564 	  abort ();
1565 	}
1566     }
1567 
1568   /* Put RELOCATION in the right bits.  */
1569   relocation >>= (bfd_vma) rightshift;
1570   relocation <<= (bfd_vma) bitpos;
1571 
1572   /* Add RELOCATION to the right bits of X.  */
1573   x = ((x & ~howto->dst_mask)
1574        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1575 
1576   /* Put the relocated value back in the object file.  */
1577   switch (size)
1578     {
1579     default:
1580       abort ();
1581     case 1:
1582       bfd_put_8 (input_bfd, x, location);
1583       break;
1584     case 2:
1585       bfd_put_16 (input_bfd, x, location);
1586       break;
1587     case 4:
1588       bfd_put_32 (input_bfd, x, location);
1589       break;
1590     case 8:
1591 #ifdef BFD64
1592       bfd_put_64 (input_bfd, x, location);
1593 #else
1594       abort ();
1595 #endif
1596       break;
1597     }
1598 
1599   return flag;
1600 }
1601 
1602 /* Clear a given location using a given howto, by applying a fixed relocation
1603    value and discarding any in-place addend.  This is used for fixed-up
1604    relocations against discarded symbols, to make ignorable debug or unwind
1605    information more obvious.  */
1606 
1607 void
_bfd_clear_contents(reloc_howto_type * howto,bfd * input_bfd,asection * input_section,bfd_byte * location)1608 _bfd_clear_contents (reloc_howto_type *howto,
1609 		     bfd *input_bfd,
1610 		     asection *input_section,
1611 		     bfd_byte *location)
1612 {
1613   int size;
1614   bfd_vma x = 0;
1615 
1616   /* Get the value we are going to relocate.  */
1617   size = bfd_get_reloc_size (howto);
1618   switch (size)
1619     {
1620     default:
1621       abort ();
1622     case 0:
1623       return;
1624     case 1:
1625       x = bfd_get_8 (input_bfd, location);
1626       break;
1627     case 2:
1628       x = bfd_get_16 (input_bfd, location);
1629       break;
1630     case 4:
1631       x = bfd_get_32 (input_bfd, location);
1632       break;
1633     case 8:
1634 #ifdef BFD64
1635       x = bfd_get_64 (input_bfd, location);
1636 #else
1637       abort ();
1638 #endif
1639       break;
1640     }
1641 
1642   /* Zero out the unwanted bits of X.  */
1643   x &= ~howto->dst_mask;
1644 
1645   /* For a range list, use 1 instead of 0 as placeholder.  0
1646      would terminate the list, hiding any later entries.  */
1647   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1648 	      ".debug_ranges") == 0
1649       && (howto->dst_mask & 1) != 0)
1650     x |= 1;
1651 
1652   /* Put the relocated value back in the object file.  */
1653   switch (size)
1654     {
1655     default:
1656     case 0:
1657       abort ();
1658     case 1:
1659       bfd_put_8 (input_bfd, x, location);
1660       break;
1661     case 2:
1662       bfd_put_16 (input_bfd, x, location);
1663       break;
1664     case 4:
1665       bfd_put_32 (input_bfd, x, location);
1666       break;
1667     case 8:
1668 #ifdef BFD64
1669       bfd_put_64 (input_bfd, x, location);
1670 #else
1671       abort ();
1672 #endif
1673       break;
1674     }
1675 }
1676 
1677 /*
1678 DOCDD
1679 INODE
1680 	howto manager,  , typedef arelent, Relocations
1681 
1682 SUBSECTION
1683 	The howto manager
1684 
1685 	When an application wants to create a relocation, but doesn't
1686 	know what the target machine might call it, it can find out by
1687 	using this bit of code.
1688 
1689 */
1690 
1691 /*
1692 TYPEDEF
1693 	bfd_reloc_code_type
1694 
1695 DESCRIPTION
1696 	The insides of a reloc code.  The idea is that, eventually, there
1697 	will be one enumerator for every type of relocation we ever do.
1698 	Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1699 	return a howto pointer.
1700 
1701 	This does mean that the application must determine the correct
1702 	enumerator value; you can't get a howto pointer from a random set
1703 	of attributes.
1704 
1705 SENUM
1706    bfd_reloc_code_real
1707 
1708 ENUM
1709   BFD_RELOC_64
1710 ENUMX
1711   BFD_RELOC_32
1712 ENUMX
1713   BFD_RELOC_26
1714 ENUMX
1715   BFD_RELOC_24
1716 ENUMX
1717   BFD_RELOC_16
1718 ENUMX
1719   BFD_RELOC_14
1720 ENUMX
1721   BFD_RELOC_8
1722 ENUMDOC
1723   Basic absolute relocations of N bits.
1724 
1725 ENUM
1726   BFD_RELOC_64_PCREL
1727 ENUMX
1728   BFD_RELOC_32_PCREL
1729 ENUMX
1730   BFD_RELOC_24_PCREL
1731 ENUMX
1732   BFD_RELOC_16_PCREL
1733 ENUMX
1734   BFD_RELOC_12_PCREL
1735 ENUMX
1736   BFD_RELOC_8_PCREL
1737 ENUMDOC
1738   PC-relative relocations.  Sometimes these are relative to the address
1739 of the relocation itself; sometimes they are relative to the start of
1740 the section containing the relocation.  It depends on the specific target.
1741 
1742 The 24-bit relocation is used in some Intel 960 configurations.
1743 
1744 ENUM
1745   BFD_RELOC_32_SECREL
1746 ENUMDOC
1747   Section relative relocations.  Some targets need this for DWARF2.
1748 
1749 ENUM
1750   BFD_RELOC_32_GOT_PCREL
1751 ENUMX
1752   BFD_RELOC_16_GOT_PCREL
1753 ENUMX
1754   BFD_RELOC_8_GOT_PCREL
1755 ENUMX
1756   BFD_RELOC_32_GOTOFF
1757 ENUMX
1758   BFD_RELOC_16_GOTOFF
1759 ENUMX
1760   BFD_RELOC_LO16_GOTOFF
1761 ENUMX
1762   BFD_RELOC_HI16_GOTOFF
1763 ENUMX
1764   BFD_RELOC_HI16_S_GOTOFF
1765 ENUMX
1766   BFD_RELOC_8_GOTOFF
1767 ENUMX
1768   BFD_RELOC_64_PLT_PCREL
1769 ENUMX
1770   BFD_RELOC_32_PLT_PCREL
1771 ENUMX
1772   BFD_RELOC_24_PLT_PCREL
1773 ENUMX
1774   BFD_RELOC_16_PLT_PCREL
1775 ENUMX
1776   BFD_RELOC_8_PLT_PCREL
1777 ENUMX
1778   BFD_RELOC_64_PLTOFF
1779 ENUMX
1780   BFD_RELOC_32_PLTOFF
1781 ENUMX
1782   BFD_RELOC_16_PLTOFF
1783 ENUMX
1784   BFD_RELOC_LO16_PLTOFF
1785 ENUMX
1786   BFD_RELOC_HI16_PLTOFF
1787 ENUMX
1788   BFD_RELOC_HI16_S_PLTOFF
1789 ENUMX
1790   BFD_RELOC_8_PLTOFF
1791 ENUMDOC
1792   For ELF.
1793 
1794 ENUM
1795   BFD_RELOC_SIZE32
1796 ENUMX
1797   BFD_RELOC_SIZE64
1798 ENUMDOC
1799   Size relocations.
1800 
1801 ENUM
1802   BFD_RELOC_68K_GLOB_DAT
1803 ENUMX
1804   BFD_RELOC_68K_JMP_SLOT
1805 ENUMX
1806   BFD_RELOC_68K_RELATIVE
1807 ENUMX
1808   BFD_RELOC_68K_TLS_GD32
1809 ENUMX
1810   BFD_RELOC_68K_TLS_GD16
1811 ENUMX
1812   BFD_RELOC_68K_TLS_GD8
1813 ENUMX
1814   BFD_RELOC_68K_TLS_LDM32
1815 ENUMX
1816   BFD_RELOC_68K_TLS_LDM16
1817 ENUMX
1818   BFD_RELOC_68K_TLS_LDM8
1819 ENUMX
1820   BFD_RELOC_68K_TLS_LDO32
1821 ENUMX
1822   BFD_RELOC_68K_TLS_LDO16
1823 ENUMX
1824   BFD_RELOC_68K_TLS_LDO8
1825 ENUMX
1826   BFD_RELOC_68K_TLS_IE32
1827 ENUMX
1828   BFD_RELOC_68K_TLS_IE16
1829 ENUMX
1830   BFD_RELOC_68K_TLS_IE8
1831 ENUMX
1832   BFD_RELOC_68K_TLS_LE32
1833 ENUMX
1834   BFD_RELOC_68K_TLS_LE16
1835 ENUMX
1836   BFD_RELOC_68K_TLS_LE8
1837 ENUMDOC
1838   Relocations used by 68K ELF.
1839 
1840 ENUM
1841   BFD_RELOC_32_BASEREL
1842 ENUMX
1843   BFD_RELOC_16_BASEREL
1844 ENUMX
1845   BFD_RELOC_LO16_BASEREL
1846 ENUMX
1847   BFD_RELOC_HI16_BASEREL
1848 ENUMX
1849   BFD_RELOC_HI16_S_BASEREL
1850 ENUMX
1851   BFD_RELOC_8_BASEREL
1852 ENUMX
1853   BFD_RELOC_RVA
1854 ENUMDOC
1855   Linkage-table relative.
1856 
1857 ENUM
1858   BFD_RELOC_8_FFnn
1859 ENUMDOC
1860   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1861 
1862 ENUM
1863   BFD_RELOC_32_PCREL_S2
1864 ENUMX
1865   BFD_RELOC_16_PCREL_S2
1866 ENUMX
1867   BFD_RELOC_23_PCREL_S2
1868 ENUMDOC
1869   These PC-relative relocations are stored as word displacements --
1870 i.e., byte displacements shifted right two bits.  The 30-bit word
1871 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1872 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1873 signed 16-bit displacement is used on the MIPS, and the 23-bit
1874 displacement is used on the Alpha.
1875 
1876 ENUM
1877   BFD_RELOC_HI22
1878 ENUMX
1879   BFD_RELOC_LO10
1880 ENUMDOC
1881   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1882 the target word.  These are used on the SPARC.
1883 
1884 ENUM
1885   BFD_RELOC_GPREL16
1886 ENUMX
1887   BFD_RELOC_GPREL32
1888 ENUMDOC
1889   For systems that allocate a Global Pointer register, these are
1890 displacements off that register.  These relocation types are
1891 handled specially, because the value the register will have is
1892 decided relatively late.
1893 
1894 ENUM
1895   BFD_RELOC_I960_CALLJ
1896 ENUMDOC
1897   Reloc types used for i960/b.out.
1898 
1899 ENUM
1900   BFD_RELOC_NONE
1901 ENUMX
1902   BFD_RELOC_SPARC_WDISP22
1903 ENUMX
1904   BFD_RELOC_SPARC22
1905 ENUMX
1906   BFD_RELOC_SPARC13
1907 ENUMX
1908   BFD_RELOC_SPARC_GOT10
1909 ENUMX
1910   BFD_RELOC_SPARC_GOT13
1911 ENUMX
1912   BFD_RELOC_SPARC_GOT22
1913 ENUMX
1914   BFD_RELOC_SPARC_PC10
1915 ENUMX
1916   BFD_RELOC_SPARC_PC22
1917 ENUMX
1918   BFD_RELOC_SPARC_WPLT30
1919 ENUMX
1920   BFD_RELOC_SPARC_COPY
1921 ENUMX
1922   BFD_RELOC_SPARC_GLOB_DAT
1923 ENUMX
1924   BFD_RELOC_SPARC_JMP_SLOT
1925 ENUMX
1926   BFD_RELOC_SPARC_RELATIVE
1927 ENUMX
1928   BFD_RELOC_SPARC_UA16
1929 ENUMX
1930   BFD_RELOC_SPARC_UA32
1931 ENUMX
1932   BFD_RELOC_SPARC_UA64
1933 ENUMX
1934   BFD_RELOC_SPARC_GOTDATA_HIX22
1935 ENUMX
1936   BFD_RELOC_SPARC_GOTDATA_LOX10
1937 ENUMX
1938   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1939 ENUMX
1940   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1941 ENUMX
1942   BFD_RELOC_SPARC_GOTDATA_OP
1943 ENUMX
1944   BFD_RELOC_SPARC_JMP_IREL
1945 ENUMX
1946   BFD_RELOC_SPARC_IRELATIVE
1947 ENUMDOC
1948   SPARC ELF relocations.  There is probably some overlap with other
1949   relocation types already defined.
1950 
1951 ENUM
1952   BFD_RELOC_SPARC_BASE13
1953 ENUMX
1954   BFD_RELOC_SPARC_BASE22
1955 ENUMDOC
1956   I think these are specific to SPARC a.out (e.g., Sun 4).
1957 
1958 ENUMEQ
1959   BFD_RELOC_SPARC_64
1960   BFD_RELOC_64
1961 ENUMX
1962   BFD_RELOC_SPARC_10
1963 ENUMX
1964   BFD_RELOC_SPARC_11
1965 ENUMX
1966   BFD_RELOC_SPARC_OLO10
1967 ENUMX
1968   BFD_RELOC_SPARC_HH22
1969 ENUMX
1970   BFD_RELOC_SPARC_HM10
1971 ENUMX
1972   BFD_RELOC_SPARC_LM22
1973 ENUMX
1974   BFD_RELOC_SPARC_PC_HH22
1975 ENUMX
1976   BFD_RELOC_SPARC_PC_HM10
1977 ENUMX
1978   BFD_RELOC_SPARC_PC_LM22
1979 ENUMX
1980   BFD_RELOC_SPARC_WDISP16
1981 ENUMX
1982   BFD_RELOC_SPARC_WDISP19
1983 ENUMX
1984   BFD_RELOC_SPARC_7
1985 ENUMX
1986   BFD_RELOC_SPARC_6
1987 ENUMX
1988   BFD_RELOC_SPARC_5
1989 ENUMEQX
1990   BFD_RELOC_SPARC_DISP64
1991   BFD_RELOC_64_PCREL
1992 ENUMX
1993   BFD_RELOC_SPARC_PLT32
1994 ENUMX
1995   BFD_RELOC_SPARC_PLT64
1996 ENUMX
1997   BFD_RELOC_SPARC_HIX22
1998 ENUMX
1999   BFD_RELOC_SPARC_LOX10
2000 ENUMX
2001   BFD_RELOC_SPARC_H44
2002 ENUMX
2003   BFD_RELOC_SPARC_M44
2004 ENUMX
2005   BFD_RELOC_SPARC_L44
2006 ENUMX
2007   BFD_RELOC_SPARC_REGISTER
2008 ENUMX
2009   BFD_RELOC_SPARC_H34
2010 ENUMX
2011   BFD_RELOC_SPARC_SIZE32
2012 ENUMX
2013   BFD_RELOC_SPARC_SIZE64
2014 ENUMX
2015   BFD_RELOC_SPARC_WDISP10
2016 ENUMDOC
2017   SPARC64 relocations
2018 
2019 ENUM
2020   BFD_RELOC_SPARC_REV32
2021 ENUMDOC
2022   SPARC little endian relocation
2023 ENUM
2024   BFD_RELOC_SPARC_TLS_GD_HI22
2025 ENUMX
2026   BFD_RELOC_SPARC_TLS_GD_LO10
2027 ENUMX
2028   BFD_RELOC_SPARC_TLS_GD_ADD
2029 ENUMX
2030   BFD_RELOC_SPARC_TLS_GD_CALL
2031 ENUMX
2032   BFD_RELOC_SPARC_TLS_LDM_HI22
2033 ENUMX
2034   BFD_RELOC_SPARC_TLS_LDM_LO10
2035 ENUMX
2036   BFD_RELOC_SPARC_TLS_LDM_ADD
2037 ENUMX
2038   BFD_RELOC_SPARC_TLS_LDM_CALL
2039 ENUMX
2040   BFD_RELOC_SPARC_TLS_LDO_HIX22
2041 ENUMX
2042   BFD_RELOC_SPARC_TLS_LDO_LOX10
2043 ENUMX
2044   BFD_RELOC_SPARC_TLS_LDO_ADD
2045 ENUMX
2046   BFD_RELOC_SPARC_TLS_IE_HI22
2047 ENUMX
2048   BFD_RELOC_SPARC_TLS_IE_LO10
2049 ENUMX
2050   BFD_RELOC_SPARC_TLS_IE_LD
2051 ENUMX
2052   BFD_RELOC_SPARC_TLS_IE_LDX
2053 ENUMX
2054   BFD_RELOC_SPARC_TLS_IE_ADD
2055 ENUMX
2056   BFD_RELOC_SPARC_TLS_LE_HIX22
2057 ENUMX
2058   BFD_RELOC_SPARC_TLS_LE_LOX10
2059 ENUMX
2060   BFD_RELOC_SPARC_TLS_DTPMOD32
2061 ENUMX
2062   BFD_RELOC_SPARC_TLS_DTPMOD64
2063 ENUMX
2064   BFD_RELOC_SPARC_TLS_DTPOFF32
2065 ENUMX
2066   BFD_RELOC_SPARC_TLS_DTPOFF64
2067 ENUMX
2068   BFD_RELOC_SPARC_TLS_TPOFF32
2069 ENUMX
2070   BFD_RELOC_SPARC_TLS_TPOFF64
2071 ENUMDOC
2072   SPARC TLS relocations
2073 
2074 ENUM
2075   BFD_RELOC_SPU_IMM7
2076 ENUMX
2077   BFD_RELOC_SPU_IMM8
2078 ENUMX
2079   BFD_RELOC_SPU_IMM10
2080 ENUMX
2081   BFD_RELOC_SPU_IMM10W
2082 ENUMX
2083   BFD_RELOC_SPU_IMM16
2084 ENUMX
2085   BFD_RELOC_SPU_IMM16W
2086 ENUMX
2087   BFD_RELOC_SPU_IMM18
2088 ENUMX
2089   BFD_RELOC_SPU_PCREL9a
2090 ENUMX
2091   BFD_RELOC_SPU_PCREL9b
2092 ENUMX
2093   BFD_RELOC_SPU_PCREL16
2094 ENUMX
2095   BFD_RELOC_SPU_LO16
2096 ENUMX
2097   BFD_RELOC_SPU_HI16
2098 ENUMX
2099   BFD_RELOC_SPU_PPU32
2100 ENUMX
2101   BFD_RELOC_SPU_PPU64
2102 ENUMX
2103   BFD_RELOC_SPU_ADD_PIC
2104 ENUMDOC
2105   SPU Relocations.
2106 
2107 ENUM
2108   BFD_RELOC_ALPHA_GPDISP_HI16
2109 ENUMDOC
2110   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2111      "addend" in some special way.
2112   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2113      writing; when reading, it will be the absolute section symbol.  The
2114      addend is the displacement in bytes of the "lda" instruction from
2115      the "ldah" instruction (which is at the address of this reloc).
2116 ENUM
2117   BFD_RELOC_ALPHA_GPDISP_LO16
2118 ENUMDOC
2119   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2120      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2121      relocations out, and is filled in with the file's GP value on
2122      reading, for convenience.
2123 
2124 ENUM
2125   BFD_RELOC_ALPHA_GPDISP
2126 ENUMDOC
2127   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2128      relocation except that there is no accompanying GPDISP_LO16
2129      relocation.
2130 
2131 ENUM
2132   BFD_RELOC_ALPHA_LITERAL
2133 ENUMX
2134   BFD_RELOC_ALPHA_ELF_LITERAL
2135 ENUMX
2136   BFD_RELOC_ALPHA_LITUSE
2137 ENUMDOC
2138   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2139      the assembler turns it into a LDQ instruction to load the address of
2140      the symbol, and then fills in a register in the real instruction.
2141 
2142      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2143      section symbol.  The addend is ignored when writing, but is filled
2144      in with the file's GP value on reading, for convenience, as with the
2145      GPDISP_LO16 reloc.
2146 
2147      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2148      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2149      but it generates output not based on the position within the .got
2150      section, but relative to the GP value chosen for the file during the
2151      final link stage.
2152 
2153      The LITUSE reloc, on the instruction using the loaded address, gives
2154      information to the linker that it might be able to use to optimize
2155      away some literal section references.  The symbol is ignored (read
2156      as the absolute section symbol), and the "addend" indicates the type
2157      of instruction using the register:
2158 	      1 - "memory" fmt insn
2159 	      2 - byte-manipulation (byte offset reg)
2160 	      3 - jsr (target of branch)
2161 
2162 ENUM
2163   BFD_RELOC_ALPHA_HINT
2164 ENUMDOC
2165   The HINT relocation indicates a value that should be filled into the
2166      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2167      prediction logic which may be provided on some processors.
2168 
2169 ENUM
2170   BFD_RELOC_ALPHA_LINKAGE
2171 ENUMDOC
2172   The LINKAGE relocation outputs a linkage pair in the object file,
2173      which is filled by the linker.
2174 
2175 ENUM
2176   BFD_RELOC_ALPHA_CODEADDR
2177 ENUMDOC
2178   The CODEADDR relocation outputs a STO_CA in the object file,
2179      which is filled by the linker.
2180 
2181 ENUM
2182   BFD_RELOC_ALPHA_GPREL_HI16
2183 ENUMX
2184   BFD_RELOC_ALPHA_GPREL_LO16
2185 ENUMDOC
2186   The GPREL_HI/LO relocations together form a 32-bit offset from the
2187      GP register.
2188 
2189 ENUM
2190   BFD_RELOC_ALPHA_BRSGP
2191 ENUMDOC
2192   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2193   share a common GP, and the target address is adjusted for
2194   STO_ALPHA_STD_GPLOAD.
2195 
2196 ENUM
2197   BFD_RELOC_ALPHA_NOP
2198 ENUMDOC
2199   The NOP relocation outputs a NOP if the longword displacement
2200      between two procedure entry points is < 2^21.
2201 
2202 ENUM
2203   BFD_RELOC_ALPHA_BSR
2204 ENUMDOC
2205   The BSR relocation outputs a BSR if the longword displacement
2206      between two procedure entry points is < 2^21.
2207 
2208 ENUM
2209   BFD_RELOC_ALPHA_LDA
2210 ENUMDOC
2211   The LDA relocation outputs a LDA if the longword displacement
2212      between two procedure entry points is < 2^16.
2213 
2214 ENUM
2215   BFD_RELOC_ALPHA_BOH
2216 ENUMDOC
2217   The BOH relocation outputs a BSR if the longword displacement
2218      between two procedure entry points is < 2^21, or else a hint.
2219 
2220 ENUM
2221   BFD_RELOC_ALPHA_TLSGD
2222 ENUMX
2223   BFD_RELOC_ALPHA_TLSLDM
2224 ENUMX
2225   BFD_RELOC_ALPHA_DTPMOD64
2226 ENUMX
2227   BFD_RELOC_ALPHA_GOTDTPREL16
2228 ENUMX
2229   BFD_RELOC_ALPHA_DTPREL64
2230 ENUMX
2231   BFD_RELOC_ALPHA_DTPREL_HI16
2232 ENUMX
2233   BFD_RELOC_ALPHA_DTPREL_LO16
2234 ENUMX
2235   BFD_RELOC_ALPHA_DTPREL16
2236 ENUMX
2237   BFD_RELOC_ALPHA_GOTTPREL16
2238 ENUMX
2239   BFD_RELOC_ALPHA_TPREL64
2240 ENUMX
2241   BFD_RELOC_ALPHA_TPREL_HI16
2242 ENUMX
2243   BFD_RELOC_ALPHA_TPREL_LO16
2244 ENUMX
2245   BFD_RELOC_ALPHA_TPREL16
2246 ENUMDOC
2247   Alpha thread-local storage relocations.
2248 
2249 ENUM
2250   BFD_RELOC_MIPS_JMP
2251 ENUMX
2252   BFD_RELOC_MICROMIPS_JMP
2253 ENUMDOC
2254   The MIPS jump instruction.
2255 
2256 ENUM
2257   BFD_RELOC_MIPS16_JMP
2258 ENUMDOC
2259   The MIPS16 jump instruction.
2260 
2261 ENUM
2262   BFD_RELOC_MIPS16_GPREL
2263 ENUMDOC
2264   MIPS16 GP relative reloc.
2265 
2266 ENUM
2267   BFD_RELOC_HI16
2268 ENUMDOC
2269   High 16 bits of 32-bit value; simple reloc.
2270 
2271 ENUM
2272   BFD_RELOC_HI16_S
2273 ENUMDOC
2274   High 16 bits of 32-bit value but the low 16 bits will be sign
2275      extended and added to form the final result.  If the low 16
2276      bits form a negative number, we need to add one to the high value
2277      to compensate for the borrow when the low bits are added.
2278 
2279 ENUM
2280   BFD_RELOC_LO16
2281 ENUMDOC
2282   Low 16 bits.
2283 
2284 ENUM
2285   BFD_RELOC_HI16_PCREL
2286 ENUMDOC
2287   High 16 bits of 32-bit pc-relative value
2288 ENUM
2289   BFD_RELOC_HI16_S_PCREL
2290 ENUMDOC
2291   High 16 bits of 32-bit pc-relative value, adjusted
2292 ENUM
2293   BFD_RELOC_LO16_PCREL
2294 ENUMDOC
2295   Low 16 bits of pc-relative value
2296 
2297 ENUM
2298   BFD_RELOC_MIPS16_GOT16
2299 ENUMX
2300   BFD_RELOC_MIPS16_CALL16
2301 ENUMDOC
2302   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2303      16-bit immediate fields
2304 ENUM
2305   BFD_RELOC_MIPS16_HI16
2306 ENUMDOC
2307   MIPS16 high 16 bits of 32-bit value.
2308 ENUM
2309   BFD_RELOC_MIPS16_HI16_S
2310 ENUMDOC
2311   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2312      extended and added to form the final result.  If the low 16
2313      bits form a negative number, we need to add one to the high value
2314      to compensate for the borrow when the low bits are added.
2315 ENUM
2316   BFD_RELOC_MIPS16_LO16
2317 ENUMDOC
2318   MIPS16 low 16 bits.
2319 
2320 ENUM
2321   BFD_RELOC_MIPS16_TLS_GD
2322 ENUMX
2323   BFD_RELOC_MIPS16_TLS_LDM
2324 ENUMX
2325   BFD_RELOC_MIPS16_TLS_DTPREL_HI16
2326 ENUMX
2327   BFD_RELOC_MIPS16_TLS_DTPREL_LO16
2328 ENUMX
2329   BFD_RELOC_MIPS16_TLS_GOTTPREL
2330 ENUMX
2331   BFD_RELOC_MIPS16_TLS_TPREL_HI16
2332 ENUMX
2333   BFD_RELOC_MIPS16_TLS_TPREL_LO16
2334 ENUMDOC
2335   MIPS16 TLS relocations
2336 
2337 ENUM
2338   BFD_RELOC_MIPS_LITERAL
2339 ENUMX
2340   BFD_RELOC_MICROMIPS_LITERAL
2341 ENUMDOC
2342   Relocation against a MIPS literal section.
2343 
2344 ENUM
2345   BFD_RELOC_MICROMIPS_7_PCREL_S1
2346 ENUMX
2347   BFD_RELOC_MICROMIPS_10_PCREL_S1
2348 ENUMX
2349   BFD_RELOC_MICROMIPS_16_PCREL_S1
2350 ENUMDOC
2351   microMIPS PC-relative relocations.
2352 
2353 ENUM
2354   BFD_RELOC_MIPS16_16_PCREL_S1
2355 ENUMDOC
2356   MIPS16 PC-relative relocation.
2357 
2358 ENUM
2359   BFD_RELOC_MIPS_21_PCREL_S2
2360 ENUMX
2361   BFD_RELOC_MIPS_26_PCREL_S2
2362 ENUMX
2363   BFD_RELOC_MIPS_18_PCREL_S3
2364 ENUMX
2365   BFD_RELOC_MIPS_19_PCREL_S2
2366 ENUMDOC
2367   MIPS PC-relative relocations.
2368 
2369 ENUM
2370   BFD_RELOC_MICROMIPS_GPREL16
2371 ENUMX
2372   BFD_RELOC_MICROMIPS_HI16
2373 ENUMX
2374   BFD_RELOC_MICROMIPS_HI16_S
2375 ENUMX
2376   BFD_RELOC_MICROMIPS_LO16
2377 ENUMDOC
2378   microMIPS versions of generic BFD relocs.
2379 
2380 ENUM
2381   BFD_RELOC_MIPS_GOT16
2382 ENUMX
2383   BFD_RELOC_MICROMIPS_GOT16
2384 ENUMX
2385   BFD_RELOC_MIPS_CALL16
2386 ENUMX
2387   BFD_RELOC_MICROMIPS_CALL16
2388 ENUMX
2389   BFD_RELOC_MIPS_GOT_HI16
2390 ENUMX
2391   BFD_RELOC_MICROMIPS_GOT_HI16
2392 ENUMX
2393   BFD_RELOC_MIPS_GOT_LO16
2394 ENUMX
2395   BFD_RELOC_MICROMIPS_GOT_LO16
2396 ENUMX
2397   BFD_RELOC_MIPS_CALL_HI16
2398 ENUMX
2399   BFD_RELOC_MICROMIPS_CALL_HI16
2400 ENUMX
2401   BFD_RELOC_MIPS_CALL_LO16
2402 ENUMX
2403   BFD_RELOC_MICROMIPS_CALL_LO16
2404 ENUMX
2405   BFD_RELOC_MIPS_SUB
2406 ENUMX
2407   BFD_RELOC_MICROMIPS_SUB
2408 ENUMX
2409   BFD_RELOC_MIPS_GOT_PAGE
2410 ENUMX
2411   BFD_RELOC_MICROMIPS_GOT_PAGE
2412 ENUMX
2413   BFD_RELOC_MIPS_GOT_OFST
2414 ENUMX
2415   BFD_RELOC_MICROMIPS_GOT_OFST
2416 ENUMX
2417   BFD_RELOC_MIPS_GOT_DISP
2418 ENUMX
2419   BFD_RELOC_MICROMIPS_GOT_DISP
2420 ENUMX
2421   BFD_RELOC_MIPS_SHIFT5
2422 ENUMX
2423   BFD_RELOC_MIPS_SHIFT6
2424 ENUMX
2425   BFD_RELOC_MIPS_INSERT_A
2426 ENUMX
2427   BFD_RELOC_MIPS_INSERT_B
2428 ENUMX
2429   BFD_RELOC_MIPS_DELETE
2430 ENUMX
2431   BFD_RELOC_MIPS_HIGHEST
2432 ENUMX
2433   BFD_RELOC_MICROMIPS_HIGHEST
2434 ENUMX
2435   BFD_RELOC_MIPS_HIGHER
2436 ENUMX
2437   BFD_RELOC_MICROMIPS_HIGHER
2438 ENUMX
2439   BFD_RELOC_MIPS_SCN_DISP
2440 ENUMX
2441   BFD_RELOC_MICROMIPS_SCN_DISP
2442 ENUMX
2443   BFD_RELOC_MIPS_REL16
2444 ENUMX
2445   BFD_RELOC_MIPS_RELGOT
2446 ENUMX
2447   BFD_RELOC_MIPS_JALR
2448 ENUMX
2449   BFD_RELOC_MICROMIPS_JALR
2450 ENUMX
2451   BFD_RELOC_MIPS_TLS_DTPMOD32
2452 ENUMX
2453   BFD_RELOC_MIPS_TLS_DTPREL32
2454 ENUMX
2455   BFD_RELOC_MIPS_TLS_DTPMOD64
2456 ENUMX
2457   BFD_RELOC_MIPS_TLS_DTPREL64
2458 ENUMX
2459   BFD_RELOC_MIPS_TLS_GD
2460 ENUMX
2461   BFD_RELOC_MICROMIPS_TLS_GD
2462 ENUMX
2463   BFD_RELOC_MIPS_TLS_LDM
2464 ENUMX
2465   BFD_RELOC_MICROMIPS_TLS_LDM
2466 ENUMX
2467   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2468 ENUMX
2469   BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
2470 ENUMX
2471   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2472 ENUMX
2473   BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
2474 ENUMX
2475   BFD_RELOC_MIPS_TLS_GOTTPREL
2476 ENUMX
2477   BFD_RELOC_MICROMIPS_TLS_GOTTPREL
2478 ENUMX
2479   BFD_RELOC_MIPS_TLS_TPREL32
2480 ENUMX
2481   BFD_RELOC_MIPS_TLS_TPREL64
2482 ENUMX
2483   BFD_RELOC_MIPS_TLS_TPREL_HI16
2484 ENUMX
2485   BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
2486 ENUMX
2487   BFD_RELOC_MIPS_TLS_TPREL_LO16
2488 ENUMX
2489   BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
2490 ENUMX
2491   BFD_RELOC_MIPS_EH
2492 ENUMDOC
2493   MIPS ELF relocations.
2494 COMMENT
2495 
2496 ENUM
2497   BFD_RELOC_MIPS_COPY
2498 ENUMX
2499   BFD_RELOC_MIPS_JUMP_SLOT
2500 ENUMDOC
2501   MIPS ELF relocations (VxWorks and PLT extensions).
2502 COMMENT
2503 
2504 ENUM
2505   BFD_RELOC_MOXIE_10_PCREL
2506 ENUMDOC
2507   Moxie ELF relocations.
2508 COMMENT
2509 
2510 ENUM
2511   BFD_RELOC_FT32_10
2512 ENUMX
2513   BFD_RELOC_FT32_20
2514 ENUMX
2515   BFD_RELOC_FT32_17
2516 ENUMX
2517   BFD_RELOC_FT32_18
2518 ENUMX
2519   BFD_RELOC_FT32_RELAX
2520 ENUMX
2521   BFD_RELOC_FT32_SC0
2522 ENUMX
2523   BFD_RELOC_FT32_SC1
2524 ENUMX
2525   BFD_RELOC_FT32_15
2526 ENUMX
2527   BFD_RELOC_FT32_DIFF32
2528 ENUMDOC
2529   FT32 ELF relocations.
2530 COMMENT
2531 
2532 ENUM
2533   BFD_RELOC_FRV_LABEL16
2534 ENUMX
2535   BFD_RELOC_FRV_LABEL24
2536 ENUMX
2537   BFD_RELOC_FRV_LO16
2538 ENUMX
2539   BFD_RELOC_FRV_HI16
2540 ENUMX
2541   BFD_RELOC_FRV_GPREL12
2542 ENUMX
2543   BFD_RELOC_FRV_GPRELU12
2544 ENUMX
2545   BFD_RELOC_FRV_GPREL32
2546 ENUMX
2547   BFD_RELOC_FRV_GPRELHI
2548 ENUMX
2549   BFD_RELOC_FRV_GPRELLO
2550 ENUMX
2551   BFD_RELOC_FRV_GOT12
2552 ENUMX
2553   BFD_RELOC_FRV_GOTHI
2554 ENUMX
2555   BFD_RELOC_FRV_GOTLO
2556 ENUMX
2557   BFD_RELOC_FRV_FUNCDESC
2558 ENUMX
2559   BFD_RELOC_FRV_FUNCDESC_GOT12
2560 ENUMX
2561   BFD_RELOC_FRV_FUNCDESC_GOTHI
2562 ENUMX
2563   BFD_RELOC_FRV_FUNCDESC_GOTLO
2564 ENUMX
2565   BFD_RELOC_FRV_FUNCDESC_VALUE
2566 ENUMX
2567   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2568 ENUMX
2569   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2570 ENUMX
2571   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2572 ENUMX
2573   BFD_RELOC_FRV_GOTOFF12
2574 ENUMX
2575   BFD_RELOC_FRV_GOTOFFHI
2576 ENUMX
2577   BFD_RELOC_FRV_GOTOFFLO
2578 ENUMX
2579   BFD_RELOC_FRV_GETTLSOFF
2580 ENUMX
2581   BFD_RELOC_FRV_TLSDESC_VALUE
2582 ENUMX
2583   BFD_RELOC_FRV_GOTTLSDESC12
2584 ENUMX
2585   BFD_RELOC_FRV_GOTTLSDESCHI
2586 ENUMX
2587   BFD_RELOC_FRV_GOTTLSDESCLO
2588 ENUMX
2589   BFD_RELOC_FRV_TLSMOFF12
2590 ENUMX
2591   BFD_RELOC_FRV_TLSMOFFHI
2592 ENUMX
2593   BFD_RELOC_FRV_TLSMOFFLO
2594 ENUMX
2595   BFD_RELOC_FRV_GOTTLSOFF12
2596 ENUMX
2597   BFD_RELOC_FRV_GOTTLSOFFHI
2598 ENUMX
2599   BFD_RELOC_FRV_GOTTLSOFFLO
2600 ENUMX
2601   BFD_RELOC_FRV_TLSOFF
2602 ENUMX
2603   BFD_RELOC_FRV_TLSDESC_RELAX
2604 ENUMX
2605   BFD_RELOC_FRV_GETTLSOFF_RELAX
2606 ENUMX
2607   BFD_RELOC_FRV_TLSOFF_RELAX
2608 ENUMX
2609   BFD_RELOC_FRV_TLSMOFF
2610 ENUMDOC
2611   Fujitsu Frv Relocations.
2612 COMMENT
2613 
2614 ENUM
2615   BFD_RELOC_MN10300_GOTOFF24
2616 ENUMDOC
2617   This is a 24bit GOT-relative reloc for the mn10300.
2618 ENUM
2619   BFD_RELOC_MN10300_GOT32
2620 ENUMDOC
2621   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2622   in the instruction.
2623 ENUM
2624   BFD_RELOC_MN10300_GOT24
2625 ENUMDOC
2626   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2627   in the instruction.
2628 ENUM
2629   BFD_RELOC_MN10300_GOT16
2630 ENUMDOC
2631   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2632   in the instruction.
2633 ENUM
2634   BFD_RELOC_MN10300_COPY
2635 ENUMDOC
2636   Copy symbol at runtime.
2637 ENUM
2638   BFD_RELOC_MN10300_GLOB_DAT
2639 ENUMDOC
2640   Create GOT entry.
2641 ENUM
2642   BFD_RELOC_MN10300_JMP_SLOT
2643 ENUMDOC
2644   Create PLT entry.
2645 ENUM
2646   BFD_RELOC_MN10300_RELATIVE
2647 ENUMDOC
2648   Adjust by program base.
2649 ENUM
2650   BFD_RELOC_MN10300_SYM_DIFF
2651 ENUMDOC
2652   Together with another reloc targeted at the same location,
2653   allows for a value that is the difference of two symbols
2654   in the same section.
2655 ENUM
2656   BFD_RELOC_MN10300_ALIGN
2657 ENUMDOC
2658   The addend of this reloc is an alignment power that must
2659   be honoured at the offset's location, regardless of linker
2660   relaxation.
2661 ENUM
2662   BFD_RELOC_MN10300_TLS_GD
2663 ENUMX
2664   BFD_RELOC_MN10300_TLS_LD
2665 ENUMX
2666   BFD_RELOC_MN10300_TLS_LDO
2667 ENUMX
2668   BFD_RELOC_MN10300_TLS_GOTIE
2669 ENUMX
2670   BFD_RELOC_MN10300_TLS_IE
2671 ENUMX
2672   BFD_RELOC_MN10300_TLS_LE
2673 ENUMX
2674   BFD_RELOC_MN10300_TLS_DTPMOD
2675 ENUMX
2676   BFD_RELOC_MN10300_TLS_DTPOFF
2677 ENUMX
2678   BFD_RELOC_MN10300_TLS_TPOFF
2679 ENUMDOC
2680   Various TLS-related relocations.
2681 ENUM
2682   BFD_RELOC_MN10300_32_PCREL
2683 ENUMDOC
2684   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2685   instruction.
2686 ENUM
2687   BFD_RELOC_MN10300_16_PCREL
2688 ENUMDOC
2689   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2690   instruction.
2691 COMMENT
2692 
2693 ENUM
2694   BFD_RELOC_386_GOT32
2695 ENUMX
2696   BFD_RELOC_386_PLT32
2697 ENUMX
2698   BFD_RELOC_386_COPY
2699 ENUMX
2700   BFD_RELOC_386_GLOB_DAT
2701 ENUMX
2702   BFD_RELOC_386_JUMP_SLOT
2703 ENUMX
2704   BFD_RELOC_386_RELATIVE
2705 ENUMX
2706   BFD_RELOC_386_GOTOFF
2707 ENUMX
2708   BFD_RELOC_386_GOTPC
2709 ENUMX
2710   BFD_RELOC_386_TLS_TPOFF
2711 ENUMX
2712   BFD_RELOC_386_TLS_IE
2713 ENUMX
2714   BFD_RELOC_386_TLS_GOTIE
2715 ENUMX
2716   BFD_RELOC_386_TLS_LE
2717 ENUMX
2718   BFD_RELOC_386_TLS_GD
2719 ENUMX
2720   BFD_RELOC_386_TLS_LDM
2721 ENUMX
2722   BFD_RELOC_386_TLS_LDO_32
2723 ENUMX
2724   BFD_RELOC_386_TLS_IE_32
2725 ENUMX
2726   BFD_RELOC_386_TLS_LE_32
2727 ENUMX
2728   BFD_RELOC_386_TLS_DTPMOD32
2729 ENUMX
2730   BFD_RELOC_386_TLS_DTPOFF32
2731 ENUMX
2732   BFD_RELOC_386_TLS_TPOFF32
2733 ENUMX
2734   BFD_RELOC_386_TLS_GOTDESC
2735 ENUMX
2736   BFD_RELOC_386_TLS_DESC_CALL
2737 ENUMX
2738   BFD_RELOC_386_TLS_DESC
2739 ENUMX
2740   BFD_RELOC_386_IRELATIVE
2741 ENUMX
2742   BFD_RELOC_386_GOT32X
2743 ENUMDOC
2744   i386/elf relocations
2745 
2746 ENUM
2747   BFD_RELOC_X86_64_GOT32
2748 ENUMX
2749   BFD_RELOC_X86_64_PLT32
2750 ENUMX
2751   BFD_RELOC_X86_64_COPY
2752 ENUMX
2753   BFD_RELOC_X86_64_GLOB_DAT
2754 ENUMX
2755   BFD_RELOC_X86_64_JUMP_SLOT
2756 ENUMX
2757   BFD_RELOC_X86_64_RELATIVE
2758 ENUMX
2759   BFD_RELOC_X86_64_GOTPCREL
2760 ENUMX
2761   BFD_RELOC_X86_64_32S
2762 ENUMX
2763   BFD_RELOC_X86_64_DTPMOD64
2764 ENUMX
2765   BFD_RELOC_X86_64_DTPOFF64
2766 ENUMX
2767   BFD_RELOC_X86_64_TPOFF64
2768 ENUMX
2769   BFD_RELOC_X86_64_TLSGD
2770 ENUMX
2771   BFD_RELOC_X86_64_TLSLD
2772 ENUMX
2773   BFD_RELOC_X86_64_DTPOFF32
2774 ENUMX
2775   BFD_RELOC_X86_64_GOTTPOFF
2776 ENUMX
2777   BFD_RELOC_X86_64_TPOFF32
2778 ENUMX
2779   BFD_RELOC_X86_64_GOTOFF64
2780 ENUMX
2781   BFD_RELOC_X86_64_GOTPC32
2782 ENUMX
2783   BFD_RELOC_X86_64_GOT64
2784 ENUMX
2785   BFD_RELOC_X86_64_GOTPCREL64
2786 ENUMX
2787   BFD_RELOC_X86_64_GOTPC64
2788 ENUMX
2789   BFD_RELOC_X86_64_GOTPLT64
2790 ENUMX
2791   BFD_RELOC_X86_64_PLTOFF64
2792 ENUMX
2793   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2794 ENUMX
2795   BFD_RELOC_X86_64_TLSDESC_CALL
2796 ENUMX
2797   BFD_RELOC_X86_64_TLSDESC
2798 ENUMX
2799   BFD_RELOC_X86_64_IRELATIVE
2800 ENUMX
2801   BFD_RELOC_X86_64_PC32_BND
2802 ENUMX
2803   BFD_RELOC_X86_64_PLT32_BND
2804 ENUMX
2805   BFD_RELOC_X86_64_GOTPCRELX
2806 ENUMX
2807   BFD_RELOC_X86_64_REX_GOTPCRELX
2808 ENUMDOC
2809   x86-64/elf relocations
2810 
2811 ENUM
2812   BFD_RELOC_NS32K_IMM_8
2813 ENUMX
2814   BFD_RELOC_NS32K_IMM_16
2815 ENUMX
2816   BFD_RELOC_NS32K_IMM_32
2817 ENUMX
2818   BFD_RELOC_NS32K_IMM_8_PCREL
2819 ENUMX
2820   BFD_RELOC_NS32K_IMM_16_PCREL
2821 ENUMX
2822   BFD_RELOC_NS32K_IMM_32_PCREL
2823 ENUMX
2824   BFD_RELOC_NS32K_DISP_8
2825 ENUMX
2826   BFD_RELOC_NS32K_DISP_16
2827 ENUMX
2828   BFD_RELOC_NS32K_DISP_32
2829 ENUMX
2830   BFD_RELOC_NS32K_DISP_8_PCREL
2831 ENUMX
2832   BFD_RELOC_NS32K_DISP_16_PCREL
2833 ENUMX
2834   BFD_RELOC_NS32K_DISP_32_PCREL
2835 ENUMDOC
2836   ns32k relocations
2837 
2838 ENUM
2839   BFD_RELOC_PDP11_DISP_8_PCREL
2840 ENUMX
2841   BFD_RELOC_PDP11_DISP_6_PCREL
2842 ENUMDOC
2843   PDP11 relocations
2844 
2845 ENUM
2846   BFD_RELOC_PJ_CODE_HI16
2847 ENUMX
2848   BFD_RELOC_PJ_CODE_LO16
2849 ENUMX
2850   BFD_RELOC_PJ_CODE_DIR16
2851 ENUMX
2852   BFD_RELOC_PJ_CODE_DIR32
2853 ENUMX
2854   BFD_RELOC_PJ_CODE_REL16
2855 ENUMX
2856   BFD_RELOC_PJ_CODE_REL32
2857 ENUMDOC
2858   Picojava relocs.  Not all of these appear in object files.
2859 
2860 ENUM
2861   BFD_RELOC_PPC_B26
2862 ENUMX
2863   BFD_RELOC_PPC_BA26
2864 ENUMX
2865   BFD_RELOC_PPC_TOC16
2866 ENUMX
2867   BFD_RELOC_PPC_B16
2868 ENUMX
2869   BFD_RELOC_PPC_B16_BRTAKEN
2870 ENUMX
2871   BFD_RELOC_PPC_B16_BRNTAKEN
2872 ENUMX
2873   BFD_RELOC_PPC_BA16
2874 ENUMX
2875   BFD_RELOC_PPC_BA16_BRTAKEN
2876 ENUMX
2877   BFD_RELOC_PPC_BA16_BRNTAKEN
2878 ENUMX
2879   BFD_RELOC_PPC_COPY
2880 ENUMX
2881   BFD_RELOC_PPC_GLOB_DAT
2882 ENUMX
2883   BFD_RELOC_PPC_JMP_SLOT
2884 ENUMX
2885   BFD_RELOC_PPC_RELATIVE
2886 ENUMX
2887   BFD_RELOC_PPC_LOCAL24PC
2888 ENUMX
2889   BFD_RELOC_PPC_EMB_NADDR32
2890 ENUMX
2891   BFD_RELOC_PPC_EMB_NADDR16
2892 ENUMX
2893   BFD_RELOC_PPC_EMB_NADDR16_LO
2894 ENUMX
2895   BFD_RELOC_PPC_EMB_NADDR16_HI
2896 ENUMX
2897   BFD_RELOC_PPC_EMB_NADDR16_HA
2898 ENUMX
2899   BFD_RELOC_PPC_EMB_SDAI16
2900 ENUMX
2901   BFD_RELOC_PPC_EMB_SDA2I16
2902 ENUMX
2903   BFD_RELOC_PPC_EMB_SDA2REL
2904 ENUMX
2905   BFD_RELOC_PPC_EMB_SDA21
2906 ENUMX
2907   BFD_RELOC_PPC_EMB_MRKREF
2908 ENUMX
2909   BFD_RELOC_PPC_EMB_RELSEC16
2910 ENUMX
2911   BFD_RELOC_PPC_EMB_RELST_LO
2912 ENUMX
2913   BFD_RELOC_PPC_EMB_RELST_HI
2914 ENUMX
2915   BFD_RELOC_PPC_EMB_RELST_HA
2916 ENUMX
2917   BFD_RELOC_PPC_EMB_BIT_FLD
2918 ENUMX
2919   BFD_RELOC_PPC_EMB_RELSDA
2920 ENUMX
2921   BFD_RELOC_PPC_VLE_REL8
2922 ENUMX
2923   BFD_RELOC_PPC_VLE_REL15
2924 ENUMX
2925   BFD_RELOC_PPC_VLE_REL24
2926 ENUMX
2927   BFD_RELOC_PPC_VLE_LO16A
2928 ENUMX
2929   BFD_RELOC_PPC_VLE_LO16D
2930 ENUMX
2931   BFD_RELOC_PPC_VLE_HI16A
2932 ENUMX
2933   BFD_RELOC_PPC_VLE_HI16D
2934 ENUMX
2935   BFD_RELOC_PPC_VLE_HA16A
2936 ENUMX
2937   BFD_RELOC_PPC_VLE_HA16D
2938 ENUMX
2939   BFD_RELOC_PPC_VLE_SDA21
2940 ENUMX
2941   BFD_RELOC_PPC_VLE_SDA21_LO
2942 ENUMX
2943   BFD_RELOC_PPC_VLE_SDAREL_LO16A
2944 ENUMX
2945   BFD_RELOC_PPC_VLE_SDAREL_LO16D
2946 ENUMX
2947   BFD_RELOC_PPC_VLE_SDAREL_HI16A
2948 ENUMX
2949   BFD_RELOC_PPC_VLE_SDAREL_HI16D
2950 ENUMX
2951   BFD_RELOC_PPC_VLE_SDAREL_HA16A
2952 ENUMX
2953   BFD_RELOC_PPC_VLE_SDAREL_HA16D
2954 ENUMX
2955   BFD_RELOC_PPC_16DX_HA
2956 ENUMX
2957   BFD_RELOC_PPC_REL16DX_HA
2958 ENUMX
2959   BFD_RELOC_PPC64_HIGHER
2960 ENUMX
2961   BFD_RELOC_PPC64_HIGHER_S
2962 ENUMX
2963   BFD_RELOC_PPC64_HIGHEST
2964 ENUMX
2965   BFD_RELOC_PPC64_HIGHEST_S
2966 ENUMX
2967   BFD_RELOC_PPC64_TOC16_LO
2968 ENUMX
2969   BFD_RELOC_PPC64_TOC16_HI
2970 ENUMX
2971   BFD_RELOC_PPC64_TOC16_HA
2972 ENUMX
2973   BFD_RELOC_PPC64_TOC
2974 ENUMX
2975   BFD_RELOC_PPC64_PLTGOT16
2976 ENUMX
2977   BFD_RELOC_PPC64_PLTGOT16_LO
2978 ENUMX
2979   BFD_RELOC_PPC64_PLTGOT16_HI
2980 ENUMX
2981   BFD_RELOC_PPC64_PLTGOT16_HA
2982 ENUMX
2983   BFD_RELOC_PPC64_ADDR16_DS
2984 ENUMX
2985   BFD_RELOC_PPC64_ADDR16_LO_DS
2986 ENUMX
2987   BFD_RELOC_PPC64_GOT16_DS
2988 ENUMX
2989   BFD_RELOC_PPC64_GOT16_LO_DS
2990 ENUMX
2991   BFD_RELOC_PPC64_PLT16_LO_DS
2992 ENUMX
2993   BFD_RELOC_PPC64_SECTOFF_DS
2994 ENUMX
2995   BFD_RELOC_PPC64_SECTOFF_LO_DS
2996 ENUMX
2997   BFD_RELOC_PPC64_TOC16_DS
2998 ENUMX
2999   BFD_RELOC_PPC64_TOC16_LO_DS
3000 ENUMX
3001   BFD_RELOC_PPC64_PLTGOT16_DS
3002 ENUMX
3003   BFD_RELOC_PPC64_PLTGOT16_LO_DS
3004 ENUMX
3005   BFD_RELOC_PPC64_ADDR16_HIGH
3006 ENUMX
3007   BFD_RELOC_PPC64_ADDR16_HIGHA
3008 ENUMX
3009   BFD_RELOC_PPC64_ADDR64_LOCAL
3010 ENUMX
3011   BFD_RELOC_PPC64_ENTRY
3012 ENUMDOC
3013   Power(rs6000) and PowerPC relocations.
3014 
3015 ENUM
3016   BFD_RELOC_PPC_TLS
3017 ENUMX
3018   BFD_RELOC_PPC_TLSGD
3019 ENUMX
3020   BFD_RELOC_PPC_TLSLD
3021 ENUMX
3022   BFD_RELOC_PPC_DTPMOD
3023 ENUMX
3024   BFD_RELOC_PPC_TPREL16
3025 ENUMX
3026   BFD_RELOC_PPC_TPREL16_LO
3027 ENUMX
3028   BFD_RELOC_PPC_TPREL16_HI
3029 ENUMX
3030   BFD_RELOC_PPC_TPREL16_HA
3031 ENUMX
3032   BFD_RELOC_PPC_TPREL
3033 ENUMX
3034   BFD_RELOC_PPC_DTPREL16
3035 ENUMX
3036   BFD_RELOC_PPC_DTPREL16_LO
3037 ENUMX
3038   BFD_RELOC_PPC_DTPREL16_HI
3039 ENUMX
3040   BFD_RELOC_PPC_DTPREL16_HA
3041 ENUMX
3042   BFD_RELOC_PPC_DTPREL
3043 ENUMX
3044   BFD_RELOC_PPC_GOT_TLSGD16
3045 ENUMX
3046   BFD_RELOC_PPC_GOT_TLSGD16_LO
3047 ENUMX
3048   BFD_RELOC_PPC_GOT_TLSGD16_HI
3049 ENUMX
3050   BFD_RELOC_PPC_GOT_TLSGD16_HA
3051 ENUMX
3052   BFD_RELOC_PPC_GOT_TLSLD16
3053 ENUMX
3054   BFD_RELOC_PPC_GOT_TLSLD16_LO
3055 ENUMX
3056   BFD_RELOC_PPC_GOT_TLSLD16_HI
3057 ENUMX
3058   BFD_RELOC_PPC_GOT_TLSLD16_HA
3059 ENUMX
3060   BFD_RELOC_PPC_GOT_TPREL16
3061 ENUMX
3062   BFD_RELOC_PPC_GOT_TPREL16_LO
3063 ENUMX
3064   BFD_RELOC_PPC_GOT_TPREL16_HI
3065 ENUMX
3066   BFD_RELOC_PPC_GOT_TPREL16_HA
3067 ENUMX
3068   BFD_RELOC_PPC_GOT_DTPREL16
3069 ENUMX
3070   BFD_RELOC_PPC_GOT_DTPREL16_LO
3071 ENUMX
3072   BFD_RELOC_PPC_GOT_DTPREL16_HI
3073 ENUMX
3074   BFD_RELOC_PPC_GOT_DTPREL16_HA
3075 ENUMX
3076   BFD_RELOC_PPC64_TPREL16_DS
3077 ENUMX
3078   BFD_RELOC_PPC64_TPREL16_LO_DS
3079 ENUMX
3080   BFD_RELOC_PPC64_TPREL16_HIGHER
3081 ENUMX
3082   BFD_RELOC_PPC64_TPREL16_HIGHERA
3083 ENUMX
3084   BFD_RELOC_PPC64_TPREL16_HIGHEST
3085 ENUMX
3086   BFD_RELOC_PPC64_TPREL16_HIGHESTA
3087 ENUMX
3088   BFD_RELOC_PPC64_DTPREL16_DS
3089 ENUMX
3090   BFD_RELOC_PPC64_DTPREL16_LO_DS
3091 ENUMX
3092   BFD_RELOC_PPC64_DTPREL16_HIGHER
3093 ENUMX
3094   BFD_RELOC_PPC64_DTPREL16_HIGHERA
3095 ENUMX
3096   BFD_RELOC_PPC64_DTPREL16_HIGHEST
3097 ENUMX
3098   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
3099 ENUMX
3100   BFD_RELOC_PPC64_TPREL16_HIGH
3101 ENUMX
3102   BFD_RELOC_PPC64_TPREL16_HIGHA
3103 ENUMX
3104   BFD_RELOC_PPC64_DTPREL16_HIGH
3105 ENUMX
3106   BFD_RELOC_PPC64_DTPREL16_HIGHA
3107 ENUMDOC
3108   PowerPC and PowerPC64 thread-local storage relocations.
3109 
3110 ENUM
3111   BFD_RELOC_I370_D12
3112 ENUMDOC
3113   IBM 370/390 relocations
3114 
3115 ENUM
3116   BFD_RELOC_CTOR
3117 ENUMDOC
3118   The type of reloc used to build a constructor table - at the moment
3119   probably a 32 bit wide absolute relocation, but the target can choose.
3120   It generally does map to one of the other relocation types.
3121 
3122 ENUM
3123   BFD_RELOC_ARM_PCREL_BRANCH
3124 ENUMDOC
3125   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
3126   not stored in the instruction.
3127 ENUM
3128   BFD_RELOC_ARM_PCREL_BLX
3129 ENUMDOC
3130   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
3131   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3132   field in the instruction.
3133 ENUM
3134   BFD_RELOC_THUMB_PCREL_BLX
3135 ENUMDOC
3136   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
3137   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
3138   field in the instruction.
3139 ENUM
3140   BFD_RELOC_ARM_PCREL_CALL
3141 ENUMDOC
3142   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
3143 ENUM
3144   BFD_RELOC_ARM_PCREL_JUMP
3145 ENUMDOC
3146   ARM 26-bit pc-relative branch for B or conditional BL instruction.
3147 
3148 ENUM
3149   BFD_RELOC_THUMB_PCREL_BRANCH7
3150 ENUMX
3151   BFD_RELOC_THUMB_PCREL_BRANCH9
3152 ENUMX
3153   BFD_RELOC_THUMB_PCREL_BRANCH12
3154 ENUMX
3155   BFD_RELOC_THUMB_PCREL_BRANCH20
3156 ENUMX
3157   BFD_RELOC_THUMB_PCREL_BRANCH23
3158 ENUMX
3159   BFD_RELOC_THUMB_PCREL_BRANCH25
3160 ENUMDOC
3161   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
3162   The lowest bit must be zero and is not stored in the instruction.
3163   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
3164   "nn" one smaller in all cases.  Note further that BRANCH23
3165   corresponds to R_ARM_THM_CALL.
3166 
3167 ENUM
3168   BFD_RELOC_ARM_OFFSET_IMM
3169 ENUMDOC
3170   12-bit immediate offset, used in ARM-format ldr and str instructions.
3171 
3172 ENUM
3173   BFD_RELOC_ARM_THUMB_OFFSET
3174 ENUMDOC
3175   5-bit immediate offset, used in Thumb-format ldr and str instructions.
3176 
3177 ENUM
3178   BFD_RELOC_ARM_TARGET1
3179 ENUMDOC
3180   Pc-relative or absolute relocation depending on target.  Used for
3181   entries in .init_array sections.
3182 ENUM
3183   BFD_RELOC_ARM_ROSEGREL32
3184 ENUMDOC
3185   Read-only segment base relative address.
3186 ENUM
3187   BFD_RELOC_ARM_SBREL32
3188 ENUMDOC
3189   Data segment base relative address.
3190 ENUM
3191   BFD_RELOC_ARM_TARGET2
3192 ENUMDOC
3193   This reloc is used for references to RTTI data from exception handling
3194   tables.  The actual definition depends on the target.  It may be a
3195   pc-relative or some form of GOT-indirect relocation.
3196 ENUM
3197   BFD_RELOC_ARM_PREL31
3198 ENUMDOC
3199   31-bit PC relative address.
3200 ENUM
3201   BFD_RELOC_ARM_MOVW
3202 ENUMX
3203   BFD_RELOC_ARM_MOVT
3204 ENUMX
3205   BFD_RELOC_ARM_MOVW_PCREL
3206 ENUMX
3207   BFD_RELOC_ARM_MOVT_PCREL
3208 ENUMX
3209   BFD_RELOC_ARM_THUMB_MOVW
3210 ENUMX
3211   BFD_RELOC_ARM_THUMB_MOVT
3212 ENUMX
3213   BFD_RELOC_ARM_THUMB_MOVW_PCREL
3214 ENUMX
3215   BFD_RELOC_ARM_THUMB_MOVT_PCREL
3216 ENUMDOC
3217   Low and High halfword relocations for MOVW and MOVT instructions.
3218 
3219 ENUM
3220   BFD_RELOC_ARM_JUMP_SLOT
3221 ENUMX
3222   BFD_RELOC_ARM_GLOB_DAT
3223 ENUMX
3224   BFD_RELOC_ARM_GOT32
3225 ENUMX
3226   BFD_RELOC_ARM_PLT32
3227 ENUMX
3228   BFD_RELOC_ARM_RELATIVE
3229 ENUMX
3230   BFD_RELOC_ARM_GOTOFF
3231 ENUMX
3232   BFD_RELOC_ARM_GOTPC
3233 ENUMX
3234   BFD_RELOC_ARM_GOT_PREL
3235 ENUMDOC
3236   Relocations for setting up GOTs and PLTs for shared libraries.
3237 
3238 ENUM
3239   BFD_RELOC_ARM_TLS_GD32
3240 ENUMX
3241   BFD_RELOC_ARM_TLS_LDO32
3242 ENUMX
3243   BFD_RELOC_ARM_TLS_LDM32
3244 ENUMX
3245   BFD_RELOC_ARM_TLS_DTPOFF32
3246 ENUMX
3247   BFD_RELOC_ARM_TLS_DTPMOD32
3248 ENUMX
3249   BFD_RELOC_ARM_TLS_TPOFF32
3250 ENUMX
3251   BFD_RELOC_ARM_TLS_IE32
3252 ENUMX
3253   BFD_RELOC_ARM_TLS_LE32
3254 ENUMX
3255   BFD_RELOC_ARM_TLS_GOTDESC
3256 ENUMX
3257   BFD_RELOC_ARM_TLS_CALL
3258 ENUMX
3259   BFD_RELOC_ARM_THM_TLS_CALL
3260 ENUMX
3261   BFD_RELOC_ARM_TLS_DESCSEQ
3262 ENUMX
3263   BFD_RELOC_ARM_THM_TLS_DESCSEQ
3264 ENUMX
3265   BFD_RELOC_ARM_TLS_DESC
3266 ENUMDOC
3267   ARM thread-local storage relocations.
3268 
3269 ENUM
3270   BFD_RELOC_ARM_ALU_PC_G0_NC
3271 ENUMX
3272   BFD_RELOC_ARM_ALU_PC_G0
3273 ENUMX
3274   BFD_RELOC_ARM_ALU_PC_G1_NC
3275 ENUMX
3276   BFD_RELOC_ARM_ALU_PC_G1
3277 ENUMX
3278   BFD_RELOC_ARM_ALU_PC_G2
3279 ENUMX
3280   BFD_RELOC_ARM_LDR_PC_G0
3281 ENUMX
3282   BFD_RELOC_ARM_LDR_PC_G1
3283 ENUMX
3284   BFD_RELOC_ARM_LDR_PC_G2
3285 ENUMX
3286   BFD_RELOC_ARM_LDRS_PC_G0
3287 ENUMX
3288   BFD_RELOC_ARM_LDRS_PC_G1
3289 ENUMX
3290   BFD_RELOC_ARM_LDRS_PC_G2
3291 ENUMX
3292   BFD_RELOC_ARM_LDC_PC_G0
3293 ENUMX
3294   BFD_RELOC_ARM_LDC_PC_G1
3295 ENUMX
3296   BFD_RELOC_ARM_LDC_PC_G2
3297 ENUMX
3298   BFD_RELOC_ARM_ALU_SB_G0_NC
3299 ENUMX
3300   BFD_RELOC_ARM_ALU_SB_G0
3301 ENUMX
3302   BFD_RELOC_ARM_ALU_SB_G1_NC
3303 ENUMX
3304   BFD_RELOC_ARM_ALU_SB_G1
3305 ENUMX
3306   BFD_RELOC_ARM_ALU_SB_G2
3307 ENUMX
3308   BFD_RELOC_ARM_LDR_SB_G0
3309 ENUMX
3310   BFD_RELOC_ARM_LDR_SB_G1
3311 ENUMX
3312   BFD_RELOC_ARM_LDR_SB_G2
3313 ENUMX
3314   BFD_RELOC_ARM_LDRS_SB_G0
3315 ENUMX
3316   BFD_RELOC_ARM_LDRS_SB_G1
3317 ENUMX
3318   BFD_RELOC_ARM_LDRS_SB_G2
3319 ENUMX
3320   BFD_RELOC_ARM_LDC_SB_G0
3321 ENUMX
3322   BFD_RELOC_ARM_LDC_SB_G1
3323 ENUMX
3324   BFD_RELOC_ARM_LDC_SB_G2
3325 ENUMDOC
3326   ARM group relocations.
3327 
3328 ENUM
3329   BFD_RELOC_ARM_V4BX
3330 ENUMDOC
3331   Annotation of BX instructions.
3332 
3333 ENUM
3334   BFD_RELOC_ARM_IRELATIVE
3335 ENUMDOC
3336   ARM support for STT_GNU_IFUNC.
3337 
3338 ENUM
3339   BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC
3340 ENUMX
3341   BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC
3342 ENUMX
3343   BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC
3344 ENUMX
3345   BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC
3346 ENUMDOC
3347   Thumb1 relocations to support execute-only code.
3348 
3349 ENUM
3350   BFD_RELOC_ARM_IMMEDIATE
3351 ENUMX
3352   BFD_RELOC_ARM_ADRL_IMMEDIATE
3353 ENUMX
3354   BFD_RELOC_ARM_T32_IMMEDIATE
3355 ENUMX
3356   BFD_RELOC_ARM_T32_ADD_IMM
3357 ENUMX
3358   BFD_RELOC_ARM_T32_IMM12
3359 ENUMX
3360   BFD_RELOC_ARM_T32_ADD_PC12
3361 ENUMX
3362   BFD_RELOC_ARM_SHIFT_IMM
3363 ENUMX
3364   BFD_RELOC_ARM_SMC
3365 ENUMX
3366   BFD_RELOC_ARM_HVC
3367 ENUMX
3368   BFD_RELOC_ARM_SWI
3369 ENUMX
3370   BFD_RELOC_ARM_MULTI
3371 ENUMX
3372   BFD_RELOC_ARM_CP_OFF_IMM
3373 ENUMX
3374   BFD_RELOC_ARM_CP_OFF_IMM_S2
3375 ENUMX
3376   BFD_RELOC_ARM_T32_CP_OFF_IMM
3377 ENUMX
3378   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3379 ENUMX
3380   BFD_RELOC_ARM_ADR_IMM
3381 ENUMX
3382   BFD_RELOC_ARM_LDR_IMM
3383 ENUMX
3384   BFD_RELOC_ARM_LITERAL
3385 ENUMX
3386   BFD_RELOC_ARM_IN_POOL
3387 ENUMX
3388   BFD_RELOC_ARM_OFFSET_IMM8
3389 ENUMX
3390   BFD_RELOC_ARM_T32_OFFSET_U8
3391 ENUMX
3392   BFD_RELOC_ARM_T32_OFFSET_IMM
3393 ENUMX
3394   BFD_RELOC_ARM_HWLITERAL
3395 ENUMX
3396   BFD_RELOC_ARM_THUMB_ADD
3397 ENUMX
3398   BFD_RELOC_ARM_THUMB_IMM
3399 ENUMX
3400   BFD_RELOC_ARM_THUMB_SHIFT
3401 ENUMDOC
3402   These relocs are only used within the ARM assembler.  They are not
3403   (at present) written to any object files.
3404 
3405 ENUM
3406   BFD_RELOC_SH_PCDISP8BY2
3407 ENUMX
3408   BFD_RELOC_SH_PCDISP12BY2
3409 ENUMX
3410   BFD_RELOC_SH_IMM3
3411 ENUMX
3412   BFD_RELOC_SH_IMM3U
3413 ENUMX
3414   BFD_RELOC_SH_DISP12
3415 ENUMX
3416   BFD_RELOC_SH_DISP12BY2
3417 ENUMX
3418   BFD_RELOC_SH_DISP12BY4
3419 ENUMX
3420   BFD_RELOC_SH_DISP12BY8
3421 ENUMX
3422   BFD_RELOC_SH_DISP20
3423 ENUMX
3424   BFD_RELOC_SH_DISP20BY8
3425 ENUMX
3426   BFD_RELOC_SH_IMM4
3427 ENUMX
3428   BFD_RELOC_SH_IMM4BY2
3429 ENUMX
3430   BFD_RELOC_SH_IMM4BY4
3431 ENUMX
3432   BFD_RELOC_SH_IMM8
3433 ENUMX
3434   BFD_RELOC_SH_IMM8BY2
3435 ENUMX
3436   BFD_RELOC_SH_IMM8BY4
3437 ENUMX
3438   BFD_RELOC_SH_PCRELIMM8BY2
3439 ENUMX
3440   BFD_RELOC_SH_PCRELIMM8BY4
3441 ENUMX
3442   BFD_RELOC_SH_SWITCH16
3443 ENUMX
3444   BFD_RELOC_SH_SWITCH32
3445 ENUMX
3446   BFD_RELOC_SH_USES
3447 ENUMX
3448   BFD_RELOC_SH_COUNT
3449 ENUMX
3450   BFD_RELOC_SH_ALIGN
3451 ENUMX
3452   BFD_RELOC_SH_CODE
3453 ENUMX
3454   BFD_RELOC_SH_DATA
3455 ENUMX
3456   BFD_RELOC_SH_LABEL
3457 ENUMX
3458   BFD_RELOC_SH_LOOP_START
3459 ENUMX
3460   BFD_RELOC_SH_LOOP_END
3461 ENUMX
3462   BFD_RELOC_SH_COPY
3463 ENUMX
3464   BFD_RELOC_SH_GLOB_DAT
3465 ENUMX
3466   BFD_RELOC_SH_JMP_SLOT
3467 ENUMX
3468   BFD_RELOC_SH_RELATIVE
3469 ENUMX
3470   BFD_RELOC_SH_GOTPC
3471 ENUMX
3472   BFD_RELOC_SH_GOT_LOW16
3473 ENUMX
3474   BFD_RELOC_SH_GOT_MEDLOW16
3475 ENUMX
3476   BFD_RELOC_SH_GOT_MEDHI16
3477 ENUMX
3478   BFD_RELOC_SH_GOT_HI16
3479 ENUMX
3480   BFD_RELOC_SH_GOTPLT_LOW16
3481 ENUMX
3482   BFD_RELOC_SH_GOTPLT_MEDLOW16
3483 ENUMX
3484   BFD_RELOC_SH_GOTPLT_MEDHI16
3485 ENUMX
3486   BFD_RELOC_SH_GOTPLT_HI16
3487 ENUMX
3488   BFD_RELOC_SH_PLT_LOW16
3489 ENUMX
3490   BFD_RELOC_SH_PLT_MEDLOW16
3491 ENUMX
3492   BFD_RELOC_SH_PLT_MEDHI16
3493 ENUMX
3494   BFD_RELOC_SH_PLT_HI16
3495 ENUMX
3496   BFD_RELOC_SH_GOTOFF_LOW16
3497 ENUMX
3498   BFD_RELOC_SH_GOTOFF_MEDLOW16
3499 ENUMX
3500   BFD_RELOC_SH_GOTOFF_MEDHI16
3501 ENUMX
3502   BFD_RELOC_SH_GOTOFF_HI16
3503 ENUMX
3504   BFD_RELOC_SH_GOTPC_LOW16
3505 ENUMX
3506   BFD_RELOC_SH_GOTPC_MEDLOW16
3507 ENUMX
3508   BFD_RELOC_SH_GOTPC_MEDHI16
3509 ENUMX
3510   BFD_RELOC_SH_GOTPC_HI16
3511 ENUMX
3512   BFD_RELOC_SH_COPY64
3513 ENUMX
3514   BFD_RELOC_SH_GLOB_DAT64
3515 ENUMX
3516   BFD_RELOC_SH_JMP_SLOT64
3517 ENUMX
3518   BFD_RELOC_SH_RELATIVE64
3519 ENUMX
3520   BFD_RELOC_SH_GOT10BY4
3521 ENUMX
3522   BFD_RELOC_SH_GOT10BY8
3523 ENUMX
3524   BFD_RELOC_SH_GOTPLT10BY4
3525 ENUMX
3526   BFD_RELOC_SH_GOTPLT10BY8
3527 ENUMX
3528   BFD_RELOC_SH_GOTPLT32
3529 ENUMX
3530   BFD_RELOC_SH_SHMEDIA_CODE
3531 ENUMX
3532   BFD_RELOC_SH_IMMU5
3533 ENUMX
3534   BFD_RELOC_SH_IMMS6
3535 ENUMX
3536   BFD_RELOC_SH_IMMS6BY32
3537 ENUMX
3538   BFD_RELOC_SH_IMMU6
3539 ENUMX
3540   BFD_RELOC_SH_IMMS10
3541 ENUMX
3542   BFD_RELOC_SH_IMMS10BY2
3543 ENUMX
3544   BFD_RELOC_SH_IMMS10BY4
3545 ENUMX
3546   BFD_RELOC_SH_IMMS10BY8
3547 ENUMX
3548   BFD_RELOC_SH_IMMS16
3549 ENUMX
3550   BFD_RELOC_SH_IMMU16
3551 ENUMX
3552   BFD_RELOC_SH_IMM_LOW16
3553 ENUMX
3554   BFD_RELOC_SH_IMM_LOW16_PCREL
3555 ENUMX
3556   BFD_RELOC_SH_IMM_MEDLOW16
3557 ENUMX
3558   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3559 ENUMX
3560   BFD_RELOC_SH_IMM_MEDHI16
3561 ENUMX
3562   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3563 ENUMX
3564   BFD_RELOC_SH_IMM_HI16
3565 ENUMX
3566   BFD_RELOC_SH_IMM_HI16_PCREL
3567 ENUMX
3568   BFD_RELOC_SH_PT_16
3569 ENUMX
3570   BFD_RELOC_SH_TLS_GD_32
3571 ENUMX
3572   BFD_RELOC_SH_TLS_LD_32
3573 ENUMX
3574   BFD_RELOC_SH_TLS_LDO_32
3575 ENUMX
3576   BFD_RELOC_SH_TLS_IE_32
3577 ENUMX
3578   BFD_RELOC_SH_TLS_LE_32
3579 ENUMX
3580   BFD_RELOC_SH_TLS_DTPMOD32
3581 ENUMX
3582   BFD_RELOC_SH_TLS_DTPOFF32
3583 ENUMX
3584   BFD_RELOC_SH_TLS_TPOFF32
3585 ENUMX
3586   BFD_RELOC_SH_GOT20
3587 ENUMX
3588   BFD_RELOC_SH_GOTOFF20
3589 ENUMX
3590   BFD_RELOC_SH_GOTFUNCDESC
3591 ENUMX
3592   BFD_RELOC_SH_GOTFUNCDESC20
3593 ENUMX
3594   BFD_RELOC_SH_GOTOFFFUNCDESC
3595 ENUMX
3596   BFD_RELOC_SH_GOTOFFFUNCDESC20
3597 ENUMX
3598   BFD_RELOC_SH_FUNCDESC
3599 ENUMDOC
3600   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3601 
3602 ENUM
3603   BFD_RELOC_ARC_NONE
3604 ENUMX
3605   BFD_RELOC_ARC_8
3606 ENUMX
3607   BFD_RELOC_ARC_16
3608 ENUMX
3609   BFD_RELOC_ARC_24
3610 ENUMX
3611   BFD_RELOC_ARC_32
3612 ENUMX
3613   BFD_RELOC_ARC_N8
3614 ENUMX
3615   BFD_RELOC_ARC_N16
3616 ENUMX
3617   BFD_RELOC_ARC_N24
3618 ENUMX
3619   BFD_RELOC_ARC_N32
3620 ENUMX
3621   BFD_RELOC_ARC_SDA
3622 ENUMX
3623   BFD_RELOC_ARC_SECTOFF
3624 ENUMX
3625   BFD_RELOC_ARC_S21H_PCREL
3626 ENUMX
3627   BFD_RELOC_ARC_S21W_PCREL
3628 ENUMX
3629   BFD_RELOC_ARC_S25H_PCREL
3630 ENUMX
3631   BFD_RELOC_ARC_S25W_PCREL
3632 ENUMX
3633   BFD_RELOC_ARC_SDA32
3634 ENUMX
3635   BFD_RELOC_ARC_SDA_LDST
3636 ENUMX
3637   BFD_RELOC_ARC_SDA_LDST1
3638 ENUMX
3639   BFD_RELOC_ARC_SDA_LDST2
3640 ENUMX
3641   BFD_RELOC_ARC_SDA16_LD
3642 ENUMX
3643   BFD_RELOC_ARC_SDA16_LD1
3644 ENUMX
3645   BFD_RELOC_ARC_SDA16_LD2
3646 ENUMX
3647   BFD_RELOC_ARC_S13_PCREL
3648 ENUMX
3649   BFD_RELOC_ARC_W
3650 ENUMX
3651   BFD_RELOC_ARC_32_ME
3652 ENUMX
3653   BFD_RELOC_ARC_32_ME_S
3654 ENUMX
3655   BFD_RELOC_ARC_N32_ME
3656 ENUMX
3657   BFD_RELOC_ARC_SECTOFF_ME
3658 ENUMX
3659   BFD_RELOC_ARC_SDA32_ME
3660 ENUMX
3661   BFD_RELOC_ARC_W_ME
3662 ENUMX
3663   BFD_RELOC_AC_SECTOFF_U8
3664 ENUMX
3665   BFD_RELOC_AC_SECTOFF_U8_1
3666 ENUMX
3667   BFD_RELOC_AC_SECTOFF_U8_2
3668 ENUMX
3669   BFD_RELOC_AC_SECTOFF_S9
3670 ENUMX
3671   BFD_RELOC_AC_SECTOFF_S9_1
3672 ENUMX
3673   BFD_RELOC_AC_SECTOFF_S9_2
3674 ENUMX
3675   BFD_RELOC_ARC_SECTOFF_ME_1
3676 ENUMX
3677   BFD_RELOC_ARC_SECTOFF_ME_2
3678 ENUMX
3679   BFD_RELOC_ARC_SECTOFF_1
3680 ENUMX
3681   BFD_RELOC_ARC_SECTOFF_2
3682 ENUMX
3683   BFD_RELOC_ARC_SDA_12
3684 ENUMX
3685   BFD_RELOC_ARC_SDA16_ST2
3686 ENUMX
3687   BFD_RELOC_ARC_32_PCREL
3688 ENUMX
3689   BFD_RELOC_ARC_PC32
3690 ENUMX
3691   BFD_RELOC_ARC_GOT32
3692 ENUMX
3693   BFD_RELOC_ARC_GOTPC32
3694 ENUMX
3695   BFD_RELOC_ARC_PLT32
3696 ENUMX
3697   BFD_RELOC_ARC_COPY
3698 ENUMX
3699   BFD_RELOC_ARC_GLOB_DAT
3700 ENUMX
3701   BFD_RELOC_ARC_JMP_SLOT
3702 ENUMX
3703   BFD_RELOC_ARC_RELATIVE
3704 ENUMX
3705   BFD_RELOC_ARC_GOTOFF
3706 ENUMX
3707   BFD_RELOC_ARC_GOTPC
3708 ENUMX
3709   BFD_RELOC_ARC_S21W_PCREL_PLT
3710 ENUMX
3711   BFD_RELOC_ARC_S25H_PCREL_PLT
3712 ENUMX
3713   BFD_RELOC_ARC_TLS_DTPMOD
3714 ENUMX
3715   BFD_RELOC_ARC_TLS_TPOFF
3716 ENUMX
3717   BFD_RELOC_ARC_TLS_GD_GOT
3718 ENUMX
3719   BFD_RELOC_ARC_TLS_GD_LD
3720 ENUMX
3721   BFD_RELOC_ARC_TLS_GD_CALL
3722 ENUMX
3723   BFD_RELOC_ARC_TLS_IE_GOT
3724 ENUMX
3725   BFD_RELOC_ARC_TLS_DTPOFF
3726 ENUMX
3727   BFD_RELOC_ARC_TLS_DTPOFF_S9
3728 ENUMX
3729   BFD_RELOC_ARC_TLS_LE_S9
3730 ENUMX
3731   BFD_RELOC_ARC_TLS_LE_32
3732 ENUMX
3733   BFD_RELOC_ARC_S25W_PCREL_PLT
3734 ENUMX
3735   BFD_RELOC_ARC_S21H_PCREL_PLT
3736 ENUMX
3737   BFD_RELOC_ARC_NPS_CMEM16
3738 ENUMX
3739   BFD_RELOC_ARC_JLI_SECTOFF
3740 ENUMDOC
3741   ARC relocs.
3742 
3743 ENUM
3744   BFD_RELOC_BFIN_16_IMM
3745 ENUMDOC
3746   ADI Blackfin 16 bit immediate absolute reloc.
3747 ENUM
3748   BFD_RELOC_BFIN_16_HIGH
3749 ENUMDOC
3750   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3751 ENUM
3752   BFD_RELOC_BFIN_4_PCREL
3753 ENUMDOC
3754   ADI Blackfin 'a' part of LSETUP.
3755 ENUM
3756   BFD_RELOC_BFIN_5_PCREL
3757 ENUMDOC
3758   ADI Blackfin.
3759 ENUM
3760   BFD_RELOC_BFIN_16_LOW
3761 ENUMDOC
3762   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3763 ENUM
3764   BFD_RELOC_BFIN_10_PCREL
3765 ENUMDOC
3766   ADI Blackfin.
3767 ENUM
3768   BFD_RELOC_BFIN_11_PCREL
3769 ENUMDOC
3770   ADI Blackfin 'b' part of LSETUP.
3771 ENUM
3772   BFD_RELOC_BFIN_12_PCREL_JUMP
3773 ENUMDOC
3774   ADI Blackfin.
3775 ENUM
3776   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3777 ENUMDOC
3778   ADI Blackfin Short jump, pcrel.
3779 ENUM
3780   BFD_RELOC_BFIN_24_PCREL_CALL_X
3781 ENUMDOC
3782   ADI Blackfin Call.x not implemented.
3783 ENUM
3784   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3785 ENUMDOC
3786   ADI Blackfin Long Jump pcrel.
3787 ENUM
3788   BFD_RELOC_BFIN_GOT17M4
3789 ENUMX
3790   BFD_RELOC_BFIN_GOTHI
3791 ENUMX
3792   BFD_RELOC_BFIN_GOTLO
3793 ENUMX
3794   BFD_RELOC_BFIN_FUNCDESC
3795 ENUMX
3796   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3797 ENUMX
3798   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3799 ENUMX
3800   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3801 ENUMX
3802   BFD_RELOC_BFIN_FUNCDESC_VALUE
3803 ENUMX
3804   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3805 ENUMX
3806   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3807 ENUMX
3808   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3809 ENUMX
3810   BFD_RELOC_BFIN_GOTOFF17M4
3811 ENUMX
3812   BFD_RELOC_BFIN_GOTOFFHI
3813 ENUMX
3814   BFD_RELOC_BFIN_GOTOFFLO
3815 ENUMDOC
3816   ADI Blackfin FD-PIC relocations.
3817 ENUM
3818   BFD_RELOC_BFIN_GOT
3819 ENUMDOC
3820   ADI Blackfin GOT relocation.
3821 ENUM
3822   BFD_RELOC_BFIN_PLTPC
3823 ENUMDOC
3824   ADI Blackfin PLTPC relocation.
3825 ENUM
3826   BFD_ARELOC_BFIN_PUSH
3827 ENUMDOC
3828   ADI Blackfin arithmetic relocation.
3829 ENUM
3830   BFD_ARELOC_BFIN_CONST
3831 ENUMDOC
3832   ADI Blackfin arithmetic relocation.
3833 ENUM
3834   BFD_ARELOC_BFIN_ADD
3835 ENUMDOC
3836   ADI Blackfin arithmetic relocation.
3837 ENUM
3838   BFD_ARELOC_BFIN_SUB
3839 ENUMDOC
3840   ADI Blackfin arithmetic relocation.
3841 ENUM
3842   BFD_ARELOC_BFIN_MULT
3843 ENUMDOC
3844   ADI Blackfin arithmetic relocation.
3845 ENUM
3846   BFD_ARELOC_BFIN_DIV
3847 ENUMDOC
3848   ADI Blackfin arithmetic relocation.
3849 ENUM
3850   BFD_ARELOC_BFIN_MOD
3851 ENUMDOC
3852   ADI Blackfin arithmetic relocation.
3853 ENUM
3854   BFD_ARELOC_BFIN_LSHIFT
3855 ENUMDOC
3856   ADI Blackfin arithmetic relocation.
3857 ENUM
3858   BFD_ARELOC_BFIN_RSHIFT
3859 ENUMDOC
3860   ADI Blackfin arithmetic relocation.
3861 ENUM
3862   BFD_ARELOC_BFIN_AND
3863 ENUMDOC
3864   ADI Blackfin arithmetic relocation.
3865 ENUM
3866   BFD_ARELOC_BFIN_OR
3867 ENUMDOC
3868   ADI Blackfin arithmetic relocation.
3869 ENUM
3870   BFD_ARELOC_BFIN_XOR
3871 ENUMDOC
3872   ADI Blackfin arithmetic relocation.
3873 ENUM
3874   BFD_ARELOC_BFIN_LAND
3875 ENUMDOC
3876   ADI Blackfin arithmetic relocation.
3877 ENUM
3878   BFD_ARELOC_BFIN_LOR
3879 ENUMDOC
3880   ADI Blackfin arithmetic relocation.
3881 ENUM
3882   BFD_ARELOC_BFIN_LEN
3883 ENUMDOC
3884   ADI Blackfin arithmetic relocation.
3885 ENUM
3886   BFD_ARELOC_BFIN_NEG
3887 ENUMDOC
3888   ADI Blackfin arithmetic relocation.
3889 ENUM
3890   BFD_ARELOC_BFIN_COMP
3891 ENUMDOC
3892   ADI Blackfin arithmetic relocation.
3893 ENUM
3894   BFD_ARELOC_BFIN_PAGE
3895 ENUMDOC
3896   ADI Blackfin arithmetic relocation.
3897 ENUM
3898   BFD_ARELOC_BFIN_HWPAGE
3899 ENUMDOC
3900   ADI Blackfin arithmetic relocation.
3901 ENUM
3902   BFD_ARELOC_BFIN_ADDR
3903 ENUMDOC
3904   ADI Blackfin arithmetic relocation.
3905 
3906 ENUM
3907   BFD_RELOC_D10V_10_PCREL_R
3908 ENUMDOC
3909   Mitsubishi D10V relocs.
3910   This is a 10-bit reloc with the right 2 bits
3911   assumed to be 0.
3912 ENUM
3913   BFD_RELOC_D10V_10_PCREL_L
3914 ENUMDOC
3915   Mitsubishi D10V relocs.
3916   This is a 10-bit reloc with the right 2 bits
3917   assumed to be 0.  This is the same as the previous reloc
3918   except it is in the left container, i.e.,
3919   shifted left 15 bits.
3920 ENUM
3921   BFD_RELOC_D10V_18
3922 ENUMDOC
3923   This is an 18-bit reloc with the right 2 bits
3924   assumed to be 0.
3925 ENUM
3926   BFD_RELOC_D10V_18_PCREL
3927 ENUMDOC
3928   This is an 18-bit reloc with the right 2 bits
3929   assumed to be 0.
3930 
3931 ENUM
3932   BFD_RELOC_D30V_6
3933 ENUMDOC
3934   Mitsubishi D30V relocs.
3935   This is a 6-bit absolute reloc.
3936 ENUM
3937   BFD_RELOC_D30V_9_PCREL
3938 ENUMDOC
3939   This is a 6-bit pc-relative reloc with
3940   the right 3 bits assumed to be 0.
3941 ENUM
3942   BFD_RELOC_D30V_9_PCREL_R
3943 ENUMDOC
3944   This is a 6-bit pc-relative reloc with
3945   the right 3 bits assumed to be 0. Same
3946   as the previous reloc but on the right side
3947   of the container.
3948 ENUM
3949   BFD_RELOC_D30V_15
3950 ENUMDOC
3951   This is a 12-bit absolute reloc with the
3952   right 3 bitsassumed to be 0.
3953 ENUM
3954   BFD_RELOC_D30V_15_PCREL
3955 ENUMDOC
3956   This is a 12-bit pc-relative reloc with
3957   the right 3 bits assumed to be 0.
3958 ENUM
3959   BFD_RELOC_D30V_15_PCREL_R
3960 ENUMDOC
3961   This is a 12-bit pc-relative reloc with
3962   the right 3 bits assumed to be 0. Same
3963   as the previous reloc but on the right side
3964   of the container.
3965 ENUM
3966   BFD_RELOC_D30V_21
3967 ENUMDOC
3968   This is an 18-bit absolute reloc with
3969   the right 3 bits assumed to be 0.
3970 ENUM
3971   BFD_RELOC_D30V_21_PCREL
3972 ENUMDOC
3973   This is an 18-bit pc-relative reloc with
3974   the right 3 bits assumed to be 0.
3975 ENUM
3976   BFD_RELOC_D30V_21_PCREL_R
3977 ENUMDOC
3978   This is an 18-bit pc-relative reloc with
3979   the right 3 bits assumed to be 0. Same
3980   as the previous reloc but on the right side
3981   of the container.
3982 ENUM
3983   BFD_RELOC_D30V_32
3984 ENUMDOC
3985   This is a 32-bit absolute reloc.
3986 ENUM
3987   BFD_RELOC_D30V_32_PCREL
3988 ENUMDOC
3989   This is a 32-bit pc-relative reloc.
3990 
3991 ENUM
3992   BFD_RELOC_DLX_HI16_S
3993 ENUMDOC
3994   DLX relocs
3995 ENUM
3996   BFD_RELOC_DLX_LO16
3997 ENUMDOC
3998   DLX relocs
3999 ENUM
4000   BFD_RELOC_DLX_JMP26
4001 ENUMDOC
4002   DLX relocs
4003 
4004 ENUM
4005   BFD_RELOC_M32C_HI8
4006 ENUMX
4007   BFD_RELOC_M32C_RL_JUMP
4008 ENUMX
4009   BFD_RELOC_M32C_RL_1ADDR
4010 ENUMX
4011   BFD_RELOC_M32C_RL_2ADDR
4012 ENUMDOC
4013   Renesas M16C/M32C Relocations.
4014 
4015 ENUM
4016   BFD_RELOC_M32R_24
4017 ENUMDOC
4018   Renesas M32R (formerly Mitsubishi M32R) relocs.
4019   This is a 24 bit absolute address.
4020 ENUM
4021   BFD_RELOC_M32R_10_PCREL
4022 ENUMDOC
4023   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
4024 ENUM
4025   BFD_RELOC_M32R_18_PCREL
4026 ENUMDOC
4027   This is an 18-bit reloc with the right 2 bits assumed to be 0.
4028 ENUM
4029   BFD_RELOC_M32R_26_PCREL
4030 ENUMDOC
4031   This is a 26-bit reloc with the right 2 bits assumed to be 0.
4032 ENUM
4033   BFD_RELOC_M32R_HI16_ULO
4034 ENUMDOC
4035   This is a 16-bit reloc containing the high 16 bits of an address
4036   used when the lower 16 bits are treated as unsigned.
4037 ENUM
4038   BFD_RELOC_M32R_HI16_SLO
4039 ENUMDOC
4040   This is a 16-bit reloc containing the high 16 bits of an address
4041   used when the lower 16 bits are treated as signed.
4042 ENUM
4043   BFD_RELOC_M32R_LO16
4044 ENUMDOC
4045   This is a 16-bit reloc containing the lower 16 bits of an address.
4046 ENUM
4047   BFD_RELOC_M32R_SDA16
4048 ENUMDOC
4049   This is a 16-bit reloc containing the small data area offset for use in
4050   add3, load, and store instructions.
4051 ENUM
4052   BFD_RELOC_M32R_GOT24
4053 ENUMX
4054   BFD_RELOC_M32R_26_PLTREL
4055 ENUMX
4056   BFD_RELOC_M32R_COPY
4057 ENUMX
4058   BFD_RELOC_M32R_GLOB_DAT
4059 ENUMX
4060   BFD_RELOC_M32R_JMP_SLOT
4061 ENUMX
4062   BFD_RELOC_M32R_RELATIVE
4063 ENUMX
4064   BFD_RELOC_M32R_GOTOFF
4065 ENUMX
4066   BFD_RELOC_M32R_GOTOFF_HI_ULO
4067 ENUMX
4068   BFD_RELOC_M32R_GOTOFF_HI_SLO
4069 ENUMX
4070   BFD_RELOC_M32R_GOTOFF_LO
4071 ENUMX
4072   BFD_RELOC_M32R_GOTPC24
4073 ENUMX
4074   BFD_RELOC_M32R_GOT16_HI_ULO
4075 ENUMX
4076   BFD_RELOC_M32R_GOT16_HI_SLO
4077 ENUMX
4078   BFD_RELOC_M32R_GOT16_LO
4079 ENUMX
4080   BFD_RELOC_M32R_GOTPC_HI_ULO
4081 ENUMX
4082   BFD_RELOC_M32R_GOTPC_HI_SLO
4083 ENUMX
4084   BFD_RELOC_M32R_GOTPC_LO
4085 ENUMDOC
4086   For PIC.
4087 
4088 
4089 ENUM
4090   BFD_RELOC_NDS32_20
4091 ENUMDOC
4092   NDS32 relocs.
4093   This is a 20 bit absolute address.
4094 ENUM
4095   BFD_RELOC_NDS32_9_PCREL
4096 ENUMDOC
4097   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4098 ENUM
4099   BFD_RELOC_NDS32_WORD_9_PCREL
4100 ENUMDOC
4101   This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
4102 ENUM
4103   BFD_RELOC_NDS32_15_PCREL
4104 ENUMDOC
4105   This is an 15-bit reloc with the right 1 bit assumed to be 0.
4106 ENUM
4107   BFD_RELOC_NDS32_17_PCREL
4108 ENUMDOC
4109   This is an 17-bit reloc with the right 1 bit assumed to be 0.
4110 ENUM
4111   BFD_RELOC_NDS32_25_PCREL
4112 ENUMDOC
4113   This is a 25-bit reloc with the right 1 bit assumed to be 0.
4114 ENUM
4115   BFD_RELOC_NDS32_HI20
4116 ENUMDOC
4117   This is a 20-bit reloc containing the high 20 bits of an address
4118   used with the lower 12 bits
4119 ENUM
4120   BFD_RELOC_NDS32_LO12S3
4121 ENUMDOC
4122   This is a 12-bit reloc containing the lower 12 bits of an address
4123   then shift right by 3. This is used with ldi,sdi...
4124 ENUM
4125   BFD_RELOC_NDS32_LO12S2
4126 ENUMDOC
4127   This is a 12-bit reloc containing the lower 12 bits of an address
4128   then shift left by 2. This is used with lwi,swi...
4129 ENUM
4130   BFD_RELOC_NDS32_LO12S1
4131 ENUMDOC
4132   This is a 12-bit reloc containing the lower 12 bits of an address
4133   then shift left by 1. This is used with lhi,shi...
4134 ENUM
4135   BFD_RELOC_NDS32_LO12S0
4136 ENUMDOC
4137   This is a 12-bit reloc containing the lower 12 bits of an address
4138   then shift left by 0. This is used with lbisbi...
4139 ENUM
4140   BFD_RELOC_NDS32_LO12S0_ORI
4141 ENUMDOC
4142   This is a 12-bit reloc containing the lower 12 bits of an address
4143   then shift left by 0. This is only used with branch relaxations
4144 ENUM
4145   BFD_RELOC_NDS32_SDA15S3
4146 ENUMDOC
4147   This is a 15-bit reloc containing the small data area 18-bit signed offset
4148   and shift left by 3 for use in ldi, sdi...
4149 ENUM
4150   BFD_RELOC_NDS32_SDA15S2
4151 ENUMDOC
4152   This is a 15-bit reloc containing the small data area 17-bit signed offset
4153   and shift left by 2 for use in lwi, swi...
4154 ENUM
4155   BFD_RELOC_NDS32_SDA15S1
4156 ENUMDOC
4157   This is a 15-bit reloc containing the small data area 16-bit signed offset
4158   and shift left by 1 for use in lhi, shi...
4159 ENUM
4160   BFD_RELOC_NDS32_SDA15S0
4161 ENUMDOC
4162   This is a 15-bit reloc containing the small data area 15-bit signed offset
4163   and shift left by 0 for use in lbi, sbi...
4164 ENUM
4165   BFD_RELOC_NDS32_SDA16S3
4166 ENUMDOC
4167   This is a 16-bit reloc containing the small data area 16-bit signed offset
4168   and shift left by 3
4169 ENUM
4170   BFD_RELOC_NDS32_SDA17S2
4171 ENUMDOC
4172   This is a 17-bit reloc containing the small data area 17-bit signed offset
4173   and shift left by 2 for use in lwi.gp, swi.gp...
4174 ENUM
4175   BFD_RELOC_NDS32_SDA18S1
4176 ENUMDOC
4177   This is a 18-bit reloc containing the small data area 18-bit signed offset
4178   and shift left by 1 for use in lhi.gp, shi.gp...
4179 ENUM
4180   BFD_RELOC_NDS32_SDA19S0
4181 ENUMDOC
4182   This is a 19-bit reloc containing the small data area 19-bit signed offset
4183   and shift left by 0 for use in lbi.gp, sbi.gp...
4184 ENUM
4185   BFD_RELOC_NDS32_GOT20
4186 ENUMX
4187   BFD_RELOC_NDS32_9_PLTREL
4188 ENUMX
4189   BFD_RELOC_NDS32_25_PLTREL
4190 ENUMX
4191   BFD_RELOC_NDS32_COPY
4192 ENUMX
4193   BFD_RELOC_NDS32_GLOB_DAT
4194 ENUMX
4195   BFD_RELOC_NDS32_JMP_SLOT
4196 ENUMX
4197   BFD_RELOC_NDS32_RELATIVE
4198 ENUMX
4199   BFD_RELOC_NDS32_GOTOFF
4200 ENUMX
4201   BFD_RELOC_NDS32_GOTOFF_HI20
4202 ENUMX
4203   BFD_RELOC_NDS32_GOTOFF_LO12
4204 ENUMX
4205   BFD_RELOC_NDS32_GOTPC20
4206 ENUMX
4207   BFD_RELOC_NDS32_GOT_HI20
4208 ENUMX
4209   BFD_RELOC_NDS32_GOT_LO12
4210 ENUMX
4211   BFD_RELOC_NDS32_GOTPC_HI20
4212 ENUMX
4213   BFD_RELOC_NDS32_GOTPC_LO12
4214 ENUMDOC
4215   for PIC
4216 ENUM
4217   BFD_RELOC_NDS32_INSN16
4218 ENUMX
4219   BFD_RELOC_NDS32_LABEL
4220 ENUMX
4221   BFD_RELOC_NDS32_LONGCALL1
4222 ENUMX
4223   BFD_RELOC_NDS32_LONGCALL2
4224 ENUMX
4225   BFD_RELOC_NDS32_LONGCALL3
4226 ENUMX
4227   BFD_RELOC_NDS32_LONGJUMP1
4228 ENUMX
4229   BFD_RELOC_NDS32_LONGJUMP2
4230 ENUMX
4231   BFD_RELOC_NDS32_LONGJUMP3
4232 ENUMX
4233   BFD_RELOC_NDS32_LOADSTORE
4234 ENUMX
4235   BFD_RELOC_NDS32_9_FIXED
4236 ENUMX
4237   BFD_RELOC_NDS32_15_FIXED
4238 ENUMX
4239   BFD_RELOC_NDS32_17_FIXED
4240 ENUMX
4241   BFD_RELOC_NDS32_25_FIXED
4242 ENUMX
4243   BFD_RELOC_NDS32_LONGCALL4
4244 ENUMX
4245   BFD_RELOC_NDS32_LONGCALL5
4246 ENUMX
4247   BFD_RELOC_NDS32_LONGCALL6
4248 ENUMX
4249   BFD_RELOC_NDS32_LONGJUMP4
4250 ENUMX
4251   BFD_RELOC_NDS32_LONGJUMP5
4252 ENUMX
4253   BFD_RELOC_NDS32_LONGJUMP6
4254 ENUMX
4255   BFD_RELOC_NDS32_LONGJUMP7
4256 ENUMDOC
4257   for relax
4258 ENUM
4259   BFD_RELOC_NDS32_PLTREL_HI20
4260 ENUMX
4261   BFD_RELOC_NDS32_PLTREL_LO12
4262 ENUMX
4263   BFD_RELOC_NDS32_PLT_GOTREL_HI20
4264 ENUMX
4265   BFD_RELOC_NDS32_PLT_GOTREL_LO12
4266 ENUMDOC
4267   for PIC
4268 ENUM
4269   BFD_RELOC_NDS32_SDA12S2_DP
4270 ENUMX
4271   BFD_RELOC_NDS32_SDA12S2_SP
4272 ENUMX
4273   BFD_RELOC_NDS32_LO12S2_DP
4274 ENUMX
4275   BFD_RELOC_NDS32_LO12S2_SP
4276 ENUMDOC
4277   for floating point
4278 ENUM
4279   BFD_RELOC_NDS32_DWARF2_OP1
4280 ENUMX
4281   BFD_RELOC_NDS32_DWARF2_OP2
4282 ENUMX
4283   BFD_RELOC_NDS32_DWARF2_LEB
4284 ENUMDOC
4285   for dwarf2 debug_line.
4286 ENUM
4287   BFD_RELOC_NDS32_UPDATE_TA
4288 ENUMDOC
4289   for eliminate 16-bit instructions
4290 ENUM
4291   BFD_RELOC_NDS32_PLT_GOTREL_LO20
4292 ENUMX
4293   BFD_RELOC_NDS32_PLT_GOTREL_LO15
4294 ENUMX
4295   BFD_RELOC_NDS32_PLT_GOTREL_LO19
4296 ENUMX
4297   BFD_RELOC_NDS32_GOT_LO15
4298 ENUMX
4299   BFD_RELOC_NDS32_GOT_LO19
4300 ENUMX
4301   BFD_RELOC_NDS32_GOTOFF_LO15
4302 ENUMX
4303   BFD_RELOC_NDS32_GOTOFF_LO19
4304 ENUMX
4305   BFD_RELOC_NDS32_GOT15S2
4306 ENUMX
4307   BFD_RELOC_NDS32_GOT17S2
4308 ENUMDOC
4309   for PIC object relaxation
4310 ENUM
4311   BFD_RELOC_NDS32_5
4312 ENUMDOC
4313   NDS32 relocs.
4314   This is a 5 bit absolute address.
4315 ENUM
4316   BFD_RELOC_NDS32_10_UPCREL
4317 ENUMDOC
4318   This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
4319 ENUM
4320   BFD_RELOC_NDS32_SDA_FP7U2_RELA
4321 ENUMDOC
4322   If fp were omitted, fp can used as another gp.
4323 ENUM
4324   BFD_RELOC_NDS32_RELAX_ENTRY
4325 ENUMX
4326   BFD_RELOC_NDS32_GOT_SUFF
4327 ENUMX
4328   BFD_RELOC_NDS32_GOTOFF_SUFF
4329 ENUMX
4330   BFD_RELOC_NDS32_PLT_GOT_SUFF
4331 ENUMX
4332   BFD_RELOC_NDS32_MULCALL_SUFF
4333 ENUMX
4334   BFD_RELOC_NDS32_PTR
4335 ENUMX
4336   BFD_RELOC_NDS32_PTR_COUNT
4337 ENUMX
4338   BFD_RELOC_NDS32_PTR_RESOLVED
4339 ENUMX
4340   BFD_RELOC_NDS32_PLTBLOCK
4341 ENUMX
4342   BFD_RELOC_NDS32_RELAX_REGION_BEGIN
4343 ENUMX
4344   BFD_RELOC_NDS32_RELAX_REGION_END
4345 ENUMX
4346   BFD_RELOC_NDS32_MINUEND
4347 ENUMX
4348   BFD_RELOC_NDS32_SUBTRAHEND
4349 ENUMX
4350   BFD_RELOC_NDS32_DIFF8
4351 ENUMX
4352   BFD_RELOC_NDS32_DIFF16
4353 ENUMX
4354   BFD_RELOC_NDS32_DIFF32
4355 ENUMX
4356   BFD_RELOC_NDS32_DIFF_ULEB128
4357 ENUMX
4358   BFD_RELOC_NDS32_EMPTY
4359 ENUMDOC
4360   relaxation relative relocation types
4361 ENUM
4362   BFD_RELOC_NDS32_25_ABS
4363 ENUMDOC
4364   This is a 25 bit absolute address.
4365 ENUM
4366   BFD_RELOC_NDS32_DATA
4367 ENUMX
4368   BFD_RELOC_NDS32_TRAN
4369 ENUMX
4370   BFD_RELOC_NDS32_17IFC_PCREL
4371 ENUMX
4372   BFD_RELOC_NDS32_10IFCU_PCREL
4373 ENUMDOC
4374   For ex9 and ifc using.
4375 ENUM
4376   BFD_RELOC_NDS32_TPOFF
4377 ENUMX
4378   BFD_RELOC_NDS32_TLS_LE_HI20
4379 ENUMX
4380   BFD_RELOC_NDS32_TLS_LE_LO12
4381 ENUMX
4382   BFD_RELOC_NDS32_TLS_LE_ADD
4383 ENUMX
4384   BFD_RELOC_NDS32_TLS_LE_LS
4385 ENUMX
4386   BFD_RELOC_NDS32_GOTTPOFF
4387 ENUMX
4388   BFD_RELOC_NDS32_TLS_IE_HI20
4389 ENUMX
4390   BFD_RELOC_NDS32_TLS_IE_LO12S2
4391 ENUMX
4392   BFD_RELOC_NDS32_TLS_TPOFF
4393 ENUMX
4394   BFD_RELOC_NDS32_TLS_LE_20
4395 ENUMX
4396   BFD_RELOC_NDS32_TLS_LE_15S0
4397 ENUMX
4398   BFD_RELOC_NDS32_TLS_LE_15S1
4399 ENUMX
4400   BFD_RELOC_NDS32_TLS_LE_15S2
4401 ENUMDOC
4402   For TLS.
4403 
4404 
4405 ENUM
4406   BFD_RELOC_V850_9_PCREL
4407 ENUMDOC
4408   This is a 9-bit reloc
4409 ENUM
4410   BFD_RELOC_V850_22_PCREL
4411 ENUMDOC
4412   This is a 22-bit reloc
4413 
4414 ENUM
4415   BFD_RELOC_V850_SDA_16_16_OFFSET
4416 ENUMDOC
4417   This is a 16 bit offset from the short data area pointer.
4418 ENUM
4419   BFD_RELOC_V850_SDA_15_16_OFFSET
4420 ENUMDOC
4421   This is a 16 bit offset (of which only 15 bits are used) from the
4422   short data area pointer.
4423 ENUM
4424   BFD_RELOC_V850_ZDA_16_16_OFFSET
4425 ENUMDOC
4426   This is a 16 bit offset from the zero data area pointer.
4427 ENUM
4428   BFD_RELOC_V850_ZDA_15_16_OFFSET
4429 ENUMDOC
4430   This is a 16 bit offset (of which only 15 bits are used) from the
4431   zero data area pointer.
4432 ENUM
4433   BFD_RELOC_V850_TDA_6_8_OFFSET
4434 ENUMDOC
4435   This is an 8 bit offset (of which only 6 bits are used) from the
4436   tiny data area pointer.
4437 ENUM
4438   BFD_RELOC_V850_TDA_7_8_OFFSET
4439 ENUMDOC
4440   This is an 8bit offset (of which only 7 bits are used) from the tiny
4441   data area pointer.
4442 ENUM
4443   BFD_RELOC_V850_TDA_7_7_OFFSET
4444 ENUMDOC
4445   This is a 7 bit offset from the tiny data area pointer.
4446 ENUM
4447   BFD_RELOC_V850_TDA_16_16_OFFSET
4448 ENUMDOC
4449   This is a 16 bit offset from the tiny data area pointer.
4450 COMMENT
4451 ENUM
4452   BFD_RELOC_V850_TDA_4_5_OFFSET
4453 ENUMDOC
4454   This is a 5 bit offset (of which only 4 bits are used) from the tiny
4455   data area pointer.
4456 ENUM
4457   BFD_RELOC_V850_TDA_4_4_OFFSET
4458 ENUMDOC
4459   This is a 4 bit offset from the tiny data area pointer.
4460 ENUM
4461   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
4462 ENUMDOC
4463   This is a 16 bit offset from the short data area pointer, with the
4464   bits placed non-contiguously in the instruction.
4465 ENUM
4466   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
4467 ENUMDOC
4468   This is a 16 bit offset from the zero data area pointer, with the
4469   bits placed non-contiguously in the instruction.
4470 ENUM
4471   BFD_RELOC_V850_CALLT_6_7_OFFSET
4472 ENUMDOC
4473   This is a 6 bit offset from the call table base pointer.
4474 ENUM
4475   BFD_RELOC_V850_CALLT_16_16_OFFSET
4476 ENUMDOC
4477   This is a 16 bit offset from the call table base pointer.
4478 ENUM
4479   BFD_RELOC_V850_LONGCALL
4480 ENUMDOC
4481   Used for relaxing indirect function calls.
4482 ENUM
4483   BFD_RELOC_V850_LONGJUMP
4484 ENUMDOC
4485   Used for relaxing indirect jumps.
4486 ENUM
4487   BFD_RELOC_V850_ALIGN
4488 ENUMDOC
4489   Used to maintain alignment whilst relaxing.
4490 ENUM
4491   BFD_RELOC_V850_LO16_SPLIT_OFFSET
4492 ENUMDOC
4493   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
4494   instructions.
4495 ENUM
4496   BFD_RELOC_V850_16_PCREL
4497 ENUMDOC
4498   This is a 16-bit reloc.
4499 ENUM
4500   BFD_RELOC_V850_17_PCREL
4501 ENUMDOC
4502   This is a 17-bit reloc.
4503 ENUM
4504   BFD_RELOC_V850_23
4505 ENUMDOC
4506   This is a 23-bit reloc.
4507 ENUM
4508   BFD_RELOC_V850_32_PCREL
4509 ENUMDOC
4510   This is a 32-bit reloc.
4511 ENUM
4512   BFD_RELOC_V850_32_ABS
4513 ENUMDOC
4514   This is a 32-bit reloc.
4515 ENUM
4516   BFD_RELOC_V850_16_SPLIT_OFFSET
4517 ENUMDOC
4518   This is a 16-bit reloc.
4519 ENUM
4520   BFD_RELOC_V850_16_S1
4521 ENUMDOC
4522   This is a 16-bit reloc.
4523 ENUM
4524   BFD_RELOC_V850_LO16_S1
4525 ENUMDOC
4526   Low 16 bits. 16 bit shifted by 1.
4527 ENUM
4528   BFD_RELOC_V850_CALLT_15_16_OFFSET
4529 ENUMDOC
4530   This is a 16 bit offset from the call table base pointer.
4531 ENUM
4532   BFD_RELOC_V850_32_GOTPCREL
4533 ENUMDOC
4534   DSO relocations.
4535 ENUM
4536   BFD_RELOC_V850_16_GOT
4537 ENUMDOC
4538   DSO relocations.
4539 ENUM
4540   BFD_RELOC_V850_32_GOT
4541 ENUMDOC
4542   DSO relocations.
4543 ENUM
4544   BFD_RELOC_V850_22_PLT_PCREL
4545 ENUMDOC
4546   DSO relocations.
4547 ENUM
4548   BFD_RELOC_V850_32_PLT_PCREL
4549 ENUMDOC
4550   DSO relocations.
4551 ENUM
4552   BFD_RELOC_V850_COPY
4553 ENUMDOC
4554   DSO relocations.
4555 ENUM
4556   BFD_RELOC_V850_GLOB_DAT
4557 ENUMDOC
4558   DSO relocations.
4559 ENUM
4560   BFD_RELOC_V850_JMP_SLOT
4561 ENUMDOC
4562   DSO relocations.
4563 ENUM
4564   BFD_RELOC_V850_RELATIVE
4565 ENUMDOC
4566   DSO relocations.
4567 ENUM
4568   BFD_RELOC_V850_16_GOTOFF
4569 ENUMDOC
4570   DSO relocations.
4571 ENUM
4572   BFD_RELOC_V850_32_GOTOFF
4573 ENUMDOC
4574   DSO relocations.
4575 ENUM
4576   BFD_RELOC_V850_CODE
4577 ENUMDOC
4578   start code.
4579 ENUM
4580   BFD_RELOC_V850_DATA
4581 ENUMDOC
4582   start data in text.
4583 
4584 ENUM
4585   BFD_RELOC_TIC30_LDP
4586 ENUMDOC
4587   This is a 8bit DP reloc for the tms320c30, where the most
4588   significant 8 bits of a 24 bit word are placed into the least
4589   significant 8 bits of the opcode.
4590 
4591 ENUM
4592   BFD_RELOC_TIC54X_PARTLS7
4593 ENUMDOC
4594   This is a 7bit reloc for the tms320c54x, where the least
4595   significant 7 bits of a 16 bit word are placed into the least
4596   significant 7 bits of the opcode.
4597 
4598 ENUM
4599   BFD_RELOC_TIC54X_PARTMS9
4600 ENUMDOC
4601   This is a 9bit DP reloc for the tms320c54x, where the most
4602   significant 9 bits of a 16 bit word are placed into the least
4603   significant 9 bits of the opcode.
4604 
4605 ENUM
4606   BFD_RELOC_TIC54X_23
4607 ENUMDOC
4608   This is an extended address 23-bit reloc for the tms320c54x.
4609 
4610 ENUM
4611   BFD_RELOC_TIC54X_16_OF_23
4612 ENUMDOC
4613   This is a 16-bit reloc for the tms320c54x, where the least
4614   significant 16 bits of a 23-bit extended address are placed into
4615   the opcode.
4616 
4617 ENUM
4618   BFD_RELOC_TIC54X_MS7_OF_23
4619 ENUMDOC
4620   This is a reloc for the tms320c54x, where the most
4621   significant 7 bits of a 23-bit extended address are placed into
4622   the opcode.
4623 
4624 ENUM
4625   BFD_RELOC_C6000_PCR_S21
4626 ENUMX
4627   BFD_RELOC_C6000_PCR_S12
4628 ENUMX
4629   BFD_RELOC_C6000_PCR_S10
4630 ENUMX
4631   BFD_RELOC_C6000_PCR_S7
4632 ENUMX
4633   BFD_RELOC_C6000_ABS_S16
4634 ENUMX
4635   BFD_RELOC_C6000_ABS_L16
4636 ENUMX
4637   BFD_RELOC_C6000_ABS_H16
4638 ENUMX
4639   BFD_RELOC_C6000_SBR_U15_B
4640 ENUMX
4641   BFD_RELOC_C6000_SBR_U15_H
4642 ENUMX
4643   BFD_RELOC_C6000_SBR_U15_W
4644 ENUMX
4645   BFD_RELOC_C6000_SBR_S16
4646 ENUMX
4647   BFD_RELOC_C6000_SBR_L16_B
4648 ENUMX
4649   BFD_RELOC_C6000_SBR_L16_H
4650 ENUMX
4651   BFD_RELOC_C6000_SBR_L16_W
4652 ENUMX
4653   BFD_RELOC_C6000_SBR_H16_B
4654 ENUMX
4655   BFD_RELOC_C6000_SBR_H16_H
4656 ENUMX
4657   BFD_RELOC_C6000_SBR_H16_W
4658 ENUMX
4659   BFD_RELOC_C6000_SBR_GOT_U15_W
4660 ENUMX
4661   BFD_RELOC_C6000_SBR_GOT_L16_W
4662 ENUMX
4663   BFD_RELOC_C6000_SBR_GOT_H16_W
4664 ENUMX
4665   BFD_RELOC_C6000_DSBT_INDEX
4666 ENUMX
4667   BFD_RELOC_C6000_PREL31
4668 ENUMX
4669   BFD_RELOC_C6000_COPY
4670 ENUMX
4671   BFD_RELOC_C6000_JUMP_SLOT
4672 ENUMX
4673   BFD_RELOC_C6000_EHTYPE
4674 ENUMX
4675   BFD_RELOC_C6000_PCR_H16
4676 ENUMX
4677   BFD_RELOC_C6000_PCR_L16
4678 ENUMX
4679   BFD_RELOC_C6000_ALIGN
4680 ENUMX
4681   BFD_RELOC_C6000_FPHEAD
4682 ENUMX
4683   BFD_RELOC_C6000_NOCMP
4684 ENUMDOC
4685   TMS320C6000 relocations.
4686 
4687 ENUM
4688   BFD_RELOC_FR30_48
4689 ENUMDOC
4690   This is a 48 bit reloc for the FR30 that stores 32 bits.
4691 ENUM
4692   BFD_RELOC_FR30_20
4693 ENUMDOC
4694   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
4695   two sections.
4696 ENUM
4697   BFD_RELOC_FR30_6_IN_4
4698 ENUMDOC
4699   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4700   4 bits.
4701 ENUM
4702   BFD_RELOC_FR30_8_IN_8
4703 ENUMDOC
4704   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
4705   into 8 bits.
4706 ENUM
4707   BFD_RELOC_FR30_9_IN_8
4708 ENUMDOC
4709   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
4710   into 8 bits.
4711 ENUM
4712   BFD_RELOC_FR30_10_IN_8
4713 ENUMDOC
4714   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
4715   into 8 bits.
4716 ENUM
4717   BFD_RELOC_FR30_9_PCREL
4718 ENUMDOC
4719   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
4720   short offset into 8 bits.
4721 ENUM
4722   BFD_RELOC_FR30_12_PCREL
4723 ENUMDOC
4724   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
4725   short offset into 11 bits.
4726 
4727 ENUM
4728   BFD_RELOC_MCORE_PCREL_IMM8BY4
4729 ENUMX
4730   BFD_RELOC_MCORE_PCREL_IMM11BY2
4731 ENUMX
4732   BFD_RELOC_MCORE_PCREL_IMM4BY2
4733 ENUMX
4734   BFD_RELOC_MCORE_PCREL_32
4735 ENUMX
4736   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
4737 ENUMX
4738   BFD_RELOC_MCORE_RVA
4739 ENUMDOC
4740   Motorola Mcore relocations.
4741 
4742 ENUM
4743   BFD_RELOC_MEP_8
4744 ENUMX
4745   BFD_RELOC_MEP_16
4746 ENUMX
4747   BFD_RELOC_MEP_32
4748 ENUMX
4749   BFD_RELOC_MEP_PCREL8A2
4750 ENUMX
4751   BFD_RELOC_MEP_PCREL12A2
4752 ENUMX
4753   BFD_RELOC_MEP_PCREL17A2
4754 ENUMX
4755   BFD_RELOC_MEP_PCREL24A2
4756 ENUMX
4757   BFD_RELOC_MEP_PCABS24A2
4758 ENUMX
4759   BFD_RELOC_MEP_LOW16
4760 ENUMX
4761   BFD_RELOC_MEP_HI16U
4762 ENUMX
4763   BFD_RELOC_MEP_HI16S
4764 ENUMX
4765   BFD_RELOC_MEP_GPREL
4766 ENUMX
4767   BFD_RELOC_MEP_TPREL
4768 ENUMX
4769   BFD_RELOC_MEP_TPREL7
4770 ENUMX
4771   BFD_RELOC_MEP_TPREL7A2
4772 ENUMX
4773   BFD_RELOC_MEP_TPREL7A4
4774 ENUMX
4775   BFD_RELOC_MEP_UIMM24
4776 ENUMX
4777   BFD_RELOC_MEP_ADDR24A4
4778 ENUMX
4779   BFD_RELOC_MEP_GNU_VTINHERIT
4780 ENUMX
4781   BFD_RELOC_MEP_GNU_VTENTRY
4782 ENUMDOC
4783   Toshiba Media Processor Relocations.
4784 COMMENT
4785 
4786 ENUM
4787   BFD_RELOC_METAG_HIADDR16
4788 ENUMX
4789   BFD_RELOC_METAG_LOADDR16
4790 ENUMX
4791   BFD_RELOC_METAG_RELBRANCH
4792 ENUMX
4793   BFD_RELOC_METAG_GETSETOFF
4794 ENUMX
4795   BFD_RELOC_METAG_HIOG
4796 ENUMX
4797   BFD_RELOC_METAG_LOOG
4798 ENUMX
4799   BFD_RELOC_METAG_REL8
4800 ENUMX
4801   BFD_RELOC_METAG_REL16
4802 ENUMX
4803   BFD_RELOC_METAG_HI16_GOTOFF
4804 ENUMX
4805   BFD_RELOC_METAG_LO16_GOTOFF
4806 ENUMX
4807   BFD_RELOC_METAG_GETSET_GOTOFF
4808 ENUMX
4809   BFD_RELOC_METAG_GETSET_GOT
4810 ENUMX
4811   BFD_RELOC_METAG_HI16_GOTPC
4812 ENUMX
4813   BFD_RELOC_METAG_LO16_GOTPC
4814 ENUMX
4815   BFD_RELOC_METAG_HI16_PLT
4816 ENUMX
4817   BFD_RELOC_METAG_LO16_PLT
4818 ENUMX
4819   BFD_RELOC_METAG_RELBRANCH_PLT
4820 ENUMX
4821   BFD_RELOC_METAG_GOTOFF
4822 ENUMX
4823   BFD_RELOC_METAG_PLT
4824 ENUMX
4825   BFD_RELOC_METAG_COPY
4826 ENUMX
4827   BFD_RELOC_METAG_JMP_SLOT
4828 ENUMX
4829   BFD_RELOC_METAG_RELATIVE
4830 ENUMX
4831   BFD_RELOC_METAG_GLOB_DAT
4832 ENUMX
4833   BFD_RELOC_METAG_TLS_GD
4834 ENUMX
4835   BFD_RELOC_METAG_TLS_LDM
4836 ENUMX
4837   BFD_RELOC_METAG_TLS_LDO_HI16
4838 ENUMX
4839   BFD_RELOC_METAG_TLS_LDO_LO16
4840 ENUMX
4841   BFD_RELOC_METAG_TLS_LDO
4842 ENUMX
4843   BFD_RELOC_METAG_TLS_IE
4844 ENUMX
4845   BFD_RELOC_METAG_TLS_IENONPIC
4846 ENUMX
4847   BFD_RELOC_METAG_TLS_IENONPIC_HI16
4848 ENUMX
4849   BFD_RELOC_METAG_TLS_IENONPIC_LO16
4850 ENUMX
4851   BFD_RELOC_METAG_TLS_TPOFF
4852 ENUMX
4853   BFD_RELOC_METAG_TLS_DTPMOD
4854 ENUMX
4855   BFD_RELOC_METAG_TLS_DTPOFF
4856 ENUMX
4857   BFD_RELOC_METAG_TLS_LE
4858 ENUMX
4859   BFD_RELOC_METAG_TLS_LE_HI16
4860 ENUMX
4861   BFD_RELOC_METAG_TLS_LE_LO16
4862 ENUMDOC
4863   Imagination Technologies Meta relocations.
4864 
4865 ENUM
4866   BFD_RELOC_MMIX_GETA
4867 ENUMX
4868   BFD_RELOC_MMIX_GETA_1
4869 ENUMX
4870   BFD_RELOC_MMIX_GETA_2
4871 ENUMX
4872   BFD_RELOC_MMIX_GETA_3
4873 ENUMDOC
4874   These are relocations for the GETA instruction.
4875 ENUM
4876   BFD_RELOC_MMIX_CBRANCH
4877 ENUMX
4878   BFD_RELOC_MMIX_CBRANCH_J
4879 ENUMX
4880   BFD_RELOC_MMIX_CBRANCH_1
4881 ENUMX
4882   BFD_RELOC_MMIX_CBRANCH_2
4883 ENUMX
4884   BFD_RELOC_MMIX_CBRANCH_3
4885 ENUMDOC
4886   These are relocations for a conditional branch instruction.
4887 ENUM
4888   BFD_RELOC_MMIX_PUSHJ
4889 ENUMX
4890   BFD_RELOC_MMIX_PUSHJ_1
4891 ENUMX
4892   BFD_RELOC_MMIX_PUSHJ_2
4893 ENUMX
4894   BFD_RELOC_MMIX_PUSHJ_3
4895 ENUMX
4896   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4897 ENUMDOC
4898   These are relocations for the PUSHJ instruction.
4899 ENUM
4900   BFD_RELOC_MMIX_JMP
4901 ENUMX
4902   BFD_RELOC_MMIX_JMP_1
4903 ENUMX
4904   BFD_RELOC_MMIX_JMP_2
4905 ENUMX
4906   BFD_RELOC_MMIX_JMP_3
4907 ENUMDOC
4908   These are relocations for the JMP instruction.
4909 ENUM
4910   BFD_RELOC_MMIX_ADDR19
4911 ENUMDOC
4912   This is a relocation for a relative address as in a GETA instruction or
4913   a branch.
4914 ENUM
4915   BFD_RELOC_MMIX_ADDR27
4916 ENUMDOC
4917   This is a relocation for a relative address as in a JMP instruction.
4918 ENUM
4919   BFD_RELOC_MMIX_REG_OR_BYTE
4920 ENUMDOC
4921   This is a relocation for an instruction field that may be a general
4922   register or a value 0..255.
4923 ENUM
4924   BFD_RELOC_MMIX_REG
4925 ENUMDOC
4926   This is a relocation for an instruction field that may be a general
4927   register.
4928 ENUM
4929   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4930 ENUMDOC
4931   This is a relocation for two instruction fields holding a register and
4932   an offset, the equivalent of the relocation.
4933 ENUM
4934   BFD_RELOC_MMIX_LOCAL
4935 ENUMDOC
4936   This relocation is an assertion that the expression is not allocated as
4937   a global register.  It does not modify contents.
4938 
4939 ENUM
4940   BFD_RELOC_AVR_7_PCREL
4941 ENUMDOC
4942   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4943   short offset into 7 bits.
4944 ENUM
4945   BFD_RELOC_AVR_13_PCREL
4946 ENUMDOC
4947   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4948   short offset into 12 bits.
4949 ENUM
4950   BFD_RELOC_AVR_16_PM
4951 ENUMDOC
4952   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4953   program memory address) into 16 bits.
4954 ENUM
4955   BFD_RELOC_AVR_LO8_LDI
4956 ENUMDOC
4957   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4958   data memory address) into 8 bit immediate value of LDI insn.
4959 ENUM
4960   BFD_RELOC_AVR_HI8_LDI
4961 ENUMDOC
4962   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4963   of data memory address) into 8 bit immediate value of LDI insn.
4964 ENUM
4965   BFD_RELOC_AVR_HH8_LDI
4966 ENUMDOC
4967   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4968   of program memory address) into 8 bit immediate value of LDI insn.
4969 ENUM
4970   BFD_RELOC_AVR_MS8_LDI
4971 ENUMDOC
4972   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4973   of 32 bit value) into 8 bit immediate value of LDI insn.
4974 ENUM
4975   BFD_RELOC_AVR_LO8_LDI_NEG
4976 ENUMDOC
4977   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4978   (usually data memory address) into 8 bit immediate value of SUBI insn.
4979 ENUM
4980   BFD_RELOC_AVR_HI8_LDI_NEG
4981 ENUMDOC
4982   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4983   (high 8 bit of data memory address) into 8 bit immediate value of
4984   SUBI insn.
4985 ENUM
4986   BFD_RELOC_AVR_HH8_LDI_NEG
4987 ENUMDOC
4988   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4989   (most high 8 bit of program memory address) into 8 bit immediate value
4990   of LDI or SUBI insn.
4991 ENUM
4992   BFD_RELOC_AVR_MS8_LDI_NEG
4993 ENUMDOC
4994   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4995   of 32 bit value) into 8 bit immediate value of LDI insn.
4996 ENUM
4997   BFD_RELOC_AVR_LO8_LDI_PM
4998 ENUMDOC
4999   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
5000   command address) into 8 bit immediate value of LDI insn.
5001 ENUM
5002   BFD_RELOC_AVR_LO8_LDI_GS
5003 ENUMDOC
5004   This is a 16 bit reloc for the AVR that stores 8 bit value
5005   (command address) into 8 bit immediate value of LDI insn. If the address
5006   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
5007   in the lower 128k.
5008 ENUM
5009   BFD_RELOC_AVR_HI8_LDI_PM
5010 ENUMDOC
5011   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
5012   of command address) into 8 bit immediate value of LDI insn.
5013 ENUM
5014   BFD_RELOC_AVR_HI8_LDI_GS
5015 ENUMDOC
5016   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
5017   of command address) into 8 bit immediate value of LDI insn.  If the address
5018   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
5019   below 128k.
5020 ENUM
5021   BFD_RELOC_AVR_HH8_LDI_PM
5022 ENUMDOC
5023   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
5024   of command address) into 8 bit immediate value of LDI insn.
5025 ENUM
5026   BFD_RELOC_AVR_LO8_LDI_PM_NEG
5027 ENUMDOC
5028   This is a 16 bit reloc for the AVR that stores negated 8 bit value
5029   (usually command address) into 8 bit immediate value of SUBI insn.
5030 ENUM
5031   BFD_RELOC_AVR_HI8_LDI_PM_NEG
5032 ENUMDOC
5033   This is a 16 bit reloc for the AVR that stores negated 8 bit value
5034   (high 8 bit of 16 bit command address) into 8 bit immediate value
5035   of SUBI insn.
5036 ENUM
5037   BFD_RELOC_AVR_HH8_LDI_PM_NEG
5038 ENUMDOC
5039   This is a 16 bit reloc for the AVR that stores negated 8 bit value
5040   (high 6 bit of 22 bit command address) into 8 bit immediate
5041   value of SUBI insn.
5042 ENUM
5043   BFD_RELOC_AVR_CALL
5044 ENUMDOC
5045   This is a 32 bit reloc for the AVR that stores 23 bit value
5046   into 22 bits.
5047 ENUM
5048   BFD_RELOC_AVR_LDI
5049 ENUMDOC
5050   This is a 16 bit reloc for the AVR that stores all needed bits
5051   for absolute addressing with ldi with overflow check to linktime
5052 ENUM
5053   BFD_RELOC_AVR_6
5054 ENUMDOC
5055   This is a 6 bit reloc for the AVR that stores offset for ldd/std
5056   instructions
5057 ENUM
5058   BFD_RELOC_AVR_6_ADIW
5059 ENUMDOC
5060   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
5061   instructions
5062 ENUM
5063   BFD_RELOC_AVR_8_LO
5064 ENUMDOC
5065   This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
5066   in .byte lo8(symbol)
5067 ENUM
5068   BFD_RELOC_AVR_8_HI
5069 ENUMDOC
5070   This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
5071   in .byte hi8(symbol)
5072 ENUM
5073   BFD_RELOC_AVR_8_HLO
5074 ENUMDOC
5075   This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
5076   in .byte hlo8(symbol)
5077 ENUM
5078   BFD_RELOC_AVR_DIFF8
5079 ENUMX
5080   BFD_RELOC_AVR_DIFF16
5081 ENUMX
5082   BFD_RELOC_AVR_DIFF32
5083 ENUMDOC
5084   AVR relocations to mark the difference of two local symbols.
5085   These are only needed to support linker relaxation and can be ignored
5086   when not relaxing.  The field is set to the value of the difference
5087   assuming no relaxation.  The relocation encodes the position of the
5088   second symbol so the linker can determine whether to adjust the field
5089   value.
5090 ENUM
5091   BFD_RELOC_AVR_LDS_STS_16
5092 ENUMDOC
5093   This is a 7 bit reloc for the AVR that stores SRAM address for 16bit
5094   lds and sts instructions supported only tiny core.
5095 ENUM
5096   BFD_RELOC_AVR_PORT6
5097 ENUMDOC
5098   This is a 6 bit reloc for the AVR that stores an I/O register
5099   number for the IN and OUT instructions
5100 ENUM
5101   BFD_RELOC_AVR_PORT5
5102 ENUMDOC
5103   This is a 5 bit reloc for the AVR that stores an I/O register
5104   number for the SBIC, SBIS, SBI and CBI instructions
5105 
5106 ENUM
5107   BFD_RELOC_RISCV_HI20
5108 ENUMX
5109   BFD_RELOC_RISCV_PCREL_HI20
5110 ENUMX
5111   BFD_RELOC_RISCV_PCREL_LO12_I
5112 ENUMX
5113   BFD_RELOC_RISCV_PCREL_LO12_S
5114 ENUMX
5115   BFD_RELOC_RISCV_LO12_I
5116 ENUMX
5117   BFD_RELOC_RISCV_LO12_S
5118 ENUMX
5119   BFD_RELOC_RISCV_GPREL12_I
5120 ENUMX
5121   BFD_RELOC_RISCV_GPREL12_S
5122 ENUMX
5123   BFD_RELOC_RISCV_TPREL_HI20
5124 ENUMX
5125   BFD_RELOC_RISCV_TPREL_LO12_I
5126 ENUMX
5127   BFD_RELOC_RISCV_TPREL_LO12_S
5128 ENUMX
5129   BFD_RELOC_RISCV_TPREL_ADD
5130 ENUMX
5131   BFD_RELOC_RISCV_CALL
5132 ENUMX
5133   BFD_RELOC_RISCV_CALL_PLT
5134 ENUMX
5135   BFD_RELOC_RISCV_ADD8
5136 ENUMX
5137   BFD_RELOC_RISCV_ADD16
5138 ENUMX
5139   BFD_RELOC_RISCV_ADD32
5140 ENUMX
5141   BFD_RELOC_RISCV_ADD64
5142 ENUMX
5143   BFD_RELOC_RISCV_SUB8
5144 ENUMX
5145   BFD_RELOC_RISCV_SUB16
5146 ENUMX
5147   BFD_RELOC_RISCV_SUB32
5148 ENUMX
5149   BFD_RELOC_RISCV_SUB64
5150 ENUMX
5151   BFD_RELOC_RISCV_GOT_HI20
5152 ENUMX
5153   BFD_RELOC_RISCV_TLS_GOT_HI20
5154 ENUMX
5155   BFD_RELOC_RISCV_TLS_GD_HI20
5156 ENUMX
5157   BFD_RELOC_RISCV_JMP
5158 ENUMX
5159   BFD_RELOC_RISCV_TLS_DTPMOD32
5160 ENUMX
5161   BFD_RELOC_RISCV_TLS_DTPREL32
5162 ENUMX
5163   BFD_RELOC_RISCV_TLS_DTPMOD64
5164 ENUMX
5165   BFD_RELOC_RISCV_TLS_DTPREL64
5166 ENUMX
5167   BFD_RELOC_RISCV_TLS_TPREL32
5168 ENUMX
5169   BFD_RELOC_RISCV_TLS_TPREL64
5170 ENUMX
5171   BFD_RELOC_RISCV_ALIGN
5172 ENUMX
5173   BFD_RELOC_RISCV_RVC_BRANCH
5174 ENUMX
5175   BFD_RELOC_RISCV_RVC_JUMP
5176 ENUMX
5177   BFD_RELOC_RISCV_RVC_LUI
5178 ENUMX
5179   BFD_RELOC_RISCV_GPREL_I
5180 ENUMX
5181   BFD_RELOC_RISCV_GPREL_S
5182 ENUMX
5183   BFD_RELOC_RISCV_TPREL_I
5184 ENUMX
5185   BFD_RELOC_RISCV_TPREL_S
5186 ENUMX
5187   BFD_RELOC_RISCV_RELAX
5188 ENUMX
5189   BFD_RELOC_RISCV_CFA
5190 ENUMX
5191   BFD_RELOC_RISCV_SUB6
5192 ENUMX
5193   BFD_RELOC_RISCV_SET6
5194 ENUMX
5195   BFD_RELOC_RISCV_SET8
5196 ENUMX
5197   BFD_RELOC_RISCV_SET16
5198 ENUMX
5199   BFD_RELOC_RISCV_SET32
5200 ENUMX
5201   BFD_RELOC_RISCV_32_PCREL
5202 ENUMDOC
5203   RISC-V relocations.
5204 
5205 ENUM
5206   BFD_RELOC_RL78_NEG8
5207 ENUMX
5208   BFD_RELOC_RL78_NEG16
5209 ENUMX
5210   BFD_RELOC_RL78_NEG24
5211 ENUMX
5212   BFD_RELOC_RL78_NEG32
5213 ENUMX
5214   BFD_RELOC_RL78_16_OP
5215 ENUMX
5216   BFD_RELOC_RL78_24_OP
5217 ENUMX
5218   BFD_RELOC_RL78_32_OP
5219 ENUMX
5220   BFD_RELOC_RL78_8U
5221 ENUMX
5222   BFD_RELOC_RL78_16U
5223 ENUMX
5224   BFD_RELOC_RL78_24U
5225 ENUMX
5226   BFD_RELOC_RL78_DIR3U_PCREL
5227 ENUMX
5228   BFD_RELOC_RL78_DIFF
5229 ENUMX
5230   BFD_RELOC_RL78_GPRELB
5231 ENUMX
5232   BFD_RELOC_RL78_GPRELW
5233 ENUMX
5234   BFD_RELOC_RL78_GPRELL
5235 ENUMX
5236   BFD_RELOC_RL78_SYM
5237 ENUMX
5238   BFD_RELOC_RL78_OP_SUBTRACT
5239 ENUMX
5240   BFD_RELOC_RL78_OP_NEG
5241 ENUMX
5242   BFD_RELOC_RL78_OP_AND
5243 ENUMX
5244   BFD_RELOC_RL78_OP_SHRA
5245 ENUMX
5246   BFD_RELOC_RL78_ABS8
5247 ENUMX
5248   BFD_RELOC_RL78_ABS16
5249 ENUMX
5250   BFD_RELOC_RL78_ABS16_REV
5251 ENUMX
5252   BFD_RELOC_RL78_ABS32
5253 ENUMX
5254   BFD_RELOC_RL78_ABS32_REV
5255 ENUMX
5256   BFD_RELOC_RL78_ABS16U
5257 ENUMX
5258   BFD_RELOC_RL78_ABS16UW
5259 ENUMX
5260   BFD_RELOC_RL78_ABS16UL
5261 ENUMX
5262   BFD_RELOC_RL78_RELAX
5263 ENUMX
5264   BFD_RELOC_RL78_HI16
5265 ENUMX
5266   BFD_RELOC_RL78_HI8
5267 ENUMX
5268   BFD_RELOC_RL78_LO16
5269 ENUMX
5270   BFD_RELOC_RL78_CODE
5271 ENUMX
5272   BFD_RELOC_RL78_SADDR
5273 ENUMDOC
5274   Renesas RL78 Relocations.
5275 
5276 ENUM
5277   BFD_RELOC_RX_NEG8
5278 ENUMX
5279   BFD_RELOC_RX_NEG16
5280 ENUMX
5281   BFD_RELOC_RX_NEG24
5282 ENUMX
5283   BFD_RELOC_RX_NEG32
5284 ENUMX
5285   BFD_RELOC_RX_16_OP
5286 ENUMX
5287   BFD_RELOC_RX_24_OP
5288 ENUMX
5289   BFD_RELOC_RX_32_OP
5290 ENUMX
5291   BFD_RELOC_RX_8U
5292 ENUMX
5293   BFD_RELOC_RX_16U
5294 ENUMX
5295   BFD_RELOC_RX_24U
5296 ENUMX
5297   BFD_RELOC_RX_DIR3U_PCREL
5298 ENUMX
5299   BFD_RELOC_RX_DIFF
5300 ENUMX
5301   BFD_RELOC_RX_GPRELB
5302 ENUMX
5303   BFD_RELOC_RX_GPRELW
5304 ENUMX
5305   BFD_RELOC_RX_GPRELL
5306 ENUMX
5307   BFD_RELOC_RX_SYM
5308 ENUMX
5309   BFD_RELOC_RX_OP_SUBTRACT
5310 ENUMX
5311   BFD_RELOC_RX_OP_NEG
5312 ENUMX
5313   BFD_RELOC_RX_ABS8
5314 ENUMX
5315   BFD_RELOC_RX_ABS16
5316 ENUMX
5317   BFD_RELOC_RX_ABS16_REV
5318 ENUMX
5319   BFD_RELOC_RX_ABS32
5320 ENUMX
5321   BFD_RELOC_RX_ABS32_REV
5322 ENUMX
5323   BFD_RELOC_RX_ABS16U
5324 ENUMX
5325   BFD_RELOC_RX_ABS16UW
5326 ENUMX
5327   BFD_RELOC_RX_ABS16UL
5328 ENUMX
5329   BFD_RELOC_RX_RELAX
5330 ENUMDOC
5331   Renesas RX Relocations.
5332 
5333 ENUM
5334   BFD_RELOC_390_12
5335 ENUMDOC
5336    Direct 12 bit.
5337 ENUM
5338   BFD_RELOC_390_GOT12
5339 ENUMDOC
5340   12 bit GOT offset.
5341 ENUM
5342   BFD_RELOC_390_PLT32
5343 ENUMDOC
5344   32 bit PC relative PLT address.
5345 ENUM
5346   BFD_RELOC_390_COPY
5347 ENUMDOC
5348   Copy symbol at runtime.
5349 ENUM
5350   BFD_RELOC_390_GLOB_DAT
5351 ENUMDOC
5352   Create GOT entry.
5353 ENUM
5354   BFD_RELOC_390_JMP_SLOT
5355 ENUMDOC
5356   Create PLT entry.
5357 ENUM
5358   BFD_RELOC_390_RELATIVE
5359 ENUMDOC
5360   Adjust by program base.
5361 ENUM
5362   BFD_RELOC_390_GOTPC
5363 ENUMDOC
5364   32 bit PC relative offset to GOT.
5365 ENUM
5366   BFD_RELOC_390_GOT16
5367 ENUMDOC
5368   16 bit GOT offset.
5369 ENUM
5370   BFD_RELOC_390_PC12DBL
5371 ENUMDOC
5372   PC relative 12 bit shifted by 1.
5373 ENUM
5374   BFD_RELOC_390_PLT12DBL
5375 ENUMDOC
5376   12 bit PC rel. PLT shifted by 1.
5377 ENUM
5378   BFD_RELOC_390_PC16DBL
5379 ENUMDOC
5380   PC relative 16 bit shifted by 1.
5381 ENUM
5382   BFD_RELOC_390_PLT16DBL
5383 ENUMDOC
5384   16 bit PC rel. PLT shifted by 1.
5385 ENUM
5386   BFD_RELOC_390_PC24DBL
5387 ENUMDOC
5388   PC relative 24 bit shifted by 1.
5389 ENUM
5390   BFD_RELOC_390_PLT24DBL
5391 ENUMDOC
5392   24 bit PC rel. PLT shifted by 1.
5393 ENUM
5394   BFD_RELOC_390_PC32DBL
5395 ENUMDOC
5396   PC relative 32 bit shifted by 1.
5397 ENUM
5398   BFD_RELOC_390_PLT32DBL
5399 ENUMDOC
5400   32 bit PC rel. PLT shifted by 1.
5401 ENUM
5402   BFD_RELOC_390_GOTPCDBL
5403 ENUMDOC
5404   32 bit PC rel. GOT shifted by 1.
5405 ENUM
5406   BFD_RELOC_390_GOT64
5407 ENUMDOC
5408   64 bit GOT offset.
5409 ENUM
5410   BFD_RELOC_390_PLT64
5411 ENUMDOC
5412   64 bit PC relative PLT address.
5413 ENUM
5414   BFD_RELOC_390_GOTENT
5415 ENUMDOC
5416   32 bit rel. offset to GOT entry.
5417 ENUM
5418   BFD_RELOC_390_GOTOFF64
5419 ENUMDOC
5420   64 bit offset to GOT.
5421 ENUM
5422   BFD_RELOC_390_GOTPLT12
5423 ENUMDOC
5424   12-bit offset to symbol-entry within GOT, with PLT handling.
5425 ENUM
5426   BFD_RELOC_390_GOTPLT16
5427 ENUMDOC
5428   16-bit offset to symbol-entry within GOT, with PLT handling.
5429 ENUM
5430   BFD_RELOC_390_GOTPLT32
5431 ENUMDOC
5432   32-bit offset to symbol-entry within GOT, with PLT handling.
5433 ENUM
5434   BFD_RELOC_390_GOTPLT64
5435 ENUMDOC
5436   64-bit offset to symbol-entry within GOT, with PLT handling.
5437 ENUM
5438   BFD_RELOC_390_GOTPLTENT
5439 ENUMDOC
5440   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
5441 ENUM
5442   BFD_RELOC_390_PLTOFF16
5443 ENUMDOC
5444   16-bit rel. offset from the GOT to a PLT entry.
5445 ENUM
5446   BFD_RELOC_390_PLTOFF32
5447 ENUMDOC
5448   32-bit rel. offset from the GOT to a PLT entry.
5449 ENUM
5450   BFD_RELOC_390_PLTOFF64
5451 ENUMDOC
5452   64-bit rel. offset from the GOT to a PLT entry.
5453 
5454 ENUM
5455   BFD_RELOC_390_TLS_LOAD
5456 ENUMX
5457   BFD_RELOC_390_TLS_GDCALL
5458 ENUMX
5459   BFD_RELOC_390_TLS_LDCALL
5460 ENUMX
5461   BFD_RELOC_390_TLS_GD32
5462 ENUMX
5463   BFD_RELOC_390_TLS_GD64
5464 ENUMX
5465   BFD_RELOC_390_TLS_GOTIE12
5466 ENUMX
5467   BFD_RELOC_390_TLS_GOTIE32
5468 ENUMX
5469   BFD_RELOC_390_TLS_GOTIE64
5470 ENUMX
5471   BFD_RELOC_390_TLS_LDM32
5472 ENUMX
5473   BFD_RELOC_390_TLS_LDM64
5474 ENUMX
5475   BFD_RELOC_390_TLS_IE32
5476 ENUMX
5477   BFD_RELOC_390_TLS_IE64
5478 ENUMX
5479   BFD_RELOC_390_TLS_IEENT
5480 ENUMX
5481   BFD_RELOC_390_TLS_LE32
5482 ENUMX
5483   BFD_RELOC_390_TLS_LE64
5484 ENUMX
5485   BFD_RELOC_390_TLS_LDO32
5486 ENUMX
5487   BFD_RELOC_390_TLS_LDO64
5488 ENUMX
5489   BFD_RELOC_390_TLS_DTPMOD
5490 ENUMX
5491   BFD_RELOC_390_TLS_DTPOFF
5492 ENUMX
5493   BFD_RELOC_390_TLS_TPOFF
5494 ENUMDOC
5495   s390 tls relocations.
5496 
5497 ENUM
5498   BFD_RELOC_390_20
5499 ENUMX
5500   BFD_RELOC_390_GOT20
5501 ENUMX
5502   BFD_RELOC_390_GOTPLT20
5503 ENUMX
5504   BFD_RELOC_390_TLS_GOTIE20
5505 ENUMDOC
5506   Long displacement extension.
5507 
5508 ENUM
5509   BFD_RELOC_390_IRELATIVE
5510 ENUMDOC
5511   STT_GNU_IFUNC relocation.
5512 
5513 ENUM
5514   BFD_RELOC_SCORE_GPREL15
5515 ENUMDOC
5516   Score relocations
5517   Low 16 bit for load/store
5518 ENUM
5519   BFD_RELOC_SCORE_DUMMY2
5520 ENUMX
5521   BFD_RELOC_SCORE_JMP
5522 ENUMDOC
5523   This is a 24-bit reloc with the right 1 bit assumed to be 0
5524 ENUM
5525   BFD_RELOC_SCORE_BRANCH
5526 ENUMDOC
5527   This is a 19-bit reloc with the right 1 bit assumed to be 0
5528 ENUM
5529   BFD_RELOC_SCORE_IMM30
5530 ENUMDOC
5531   This is a 32-bit reloc for 48-bit instructions.
5532 ENUM
5533   BFD_RELOC_SCORE_IMM32
5534 ENUMDOC
5535   This is a 32-bit reloc for 48-bit instructions.
5536 ENUM
5537   BFD_RELOC_SCORE16_JMP
5538 ENUMDOC
5539   This is a 11-bit reloc with the right 1 bit assumed to be 0
5540 ENUM
5541   BFD_RELOC_SCORE16_BRANCH
5542 ENUMDOC
5543   This is a 8-bit reloc with the right 1 bit assumed to be 0
5544 ENUM
5545   BFD_RELOC_SCORE_BCMP
5546 ENUMDOC
5547    This is a 9-bit reloc with the right 1 bit assumed to be 0
5548 ENUM
5549   BFD_RELOC_SCORE_GOT15
5550 ENUMX
5551   BFD_RELOC_SCORE_GOT_LO16
5552 ENUMX
5553   BFD_RELOC_SCORE_CALL15
5554 ENUMX
5555   BFD_RELOC_SCORE_DUMMY_HI16
5556 ENUMDOC
5557   Undocumented Score relocs
5558 
5559 ENUM
5560   BFD_RELOC_IP2K_FR9
5561 ENUMDOC
5562   Scenix IP2K - 9-bit register number / data address
5563 ENUM
5564   BFD_RELOC_IP2K_BANK
5565 ENUMDOC
5566   Scenix IP2K - 4-bit register/data bank number
5567 ENUM
5568   BFD_RELOC_IP2K_ADDR16CJP
5569 ENUMDOC
5570   Scenix IP2K - low 13 bits of instruction word address
5571 ENUM
5572   BFD_RELOC_IP2K_PAGE3
5573 ENUMDOC
5574   Scenix IP2K - high 3 bits of instruction word address
5575 ENUM
5576   BFD_RELOC_IP2K_LO8DATA
5577 ENUMX
5578   BFD_RELOC_IP2K_HI8DATA
5579 ENUMX
5580   BFD_RELOC_IP2K_EX8DATA
5581 ENUMDOC
5582   Scenix IP2K - ext/low/high 8 bits of data address
5583 ENUM
5584   BFD_RELOC_IP2K_LO8INSN
5585 ENUMX
5586   BFD_RELOC_IP2K_HI8INSN
5587 ENUMDOC
5588   Scenix IP2K - low/high 8 bits of instruction word address
5589 ENUM
5590   BFD_RELOC_IP2K_PC_SKIP
5591 ENUMDOC
5592   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
5593 ENUM
5594   BFD_RELOC_IP2K_TEXT
5595 ENUMDOC
5596   Scenix IP2K - 16 bit word address in text section.
5597 ENUM
5598   BFD_RELOC_IP2K_FR_OFFSET
5599 ENUMDOC
5600   Scenix IP2K - 7-bit sp or dp offset
5601 ENUM
5602   BFD_RELOC_VPE4KMATH_DATA
5603 ENUMX
5604   BFD_RELOC_VPE4KMATH_INSN
5605 ENUMDOC
5606   Scenix VPE4K coprocessor - data/insn-space addressing
5607 
5608 ENUM
5609   BFD_RELOC_VTABLE_INHERIT
5610 ENUMX
5611   BFD_RELOC_VTABLE_ENTRY
5612 ENUMDOC
5613   These two relocations are used by the linker to determine which of
5614   the entries in a C++ virtual function table are actually used.  When
5615   the --gc-sections option is given, the linker will zero out the entries
5616   that are not used, so that the code for those functions need not be
5617   included in the output.
5618 
5619   VTABLE_INHERIT is a zero-space relocation used to describe to the
5620   linker the inheritance tree of a C++ virtual function table.  The
5621   relocation's symbol should be the parent class' vtable, and the
5622   relocation should be located at the child vtable.
5623 
5624   VTABLE_ENTRY is a zero-space relocation that describes the use of a
5625   virtual function table entry.  The reloc's symbol should refer to the
5626   table of the class mentioned in the code.  Off of that base, an offset
5627   describes the entry that is being used.  For Rela hosts, this offset
5628   is stored in the reloc's addend.  For Rel hosts, we are forced to put
5629   this offset in the reloc's section offset.
5630 
5631 ENUM
5632   BFD_RELOC_IA64_IMM14
5633 ENUMX
5634   BFD_RELOC_IA64_IMM22
5635 ENUMX
5636   BFD_RELOC_IA64_IMM64
5637 ENUMX
5638   BFD_RELOC_IA64_DIR32MSB
5639 ENUMX
5640   BFD_RELOC_IA64_DIR32LSB
5641 ENUMX
5642   BFD_RELOC_IA64_DIR64MSB
5643 ENUMX
5644   BFD_RELOC_IA64_DIR64LSB
5645 ENUMX
5646   BFD_RELOC_IA64_GPREL22
5647 ENUMX
5648   BFD_RELOC_IA64_GPREL64I
5649 ENUMX
5650   BFD_RELOC_IA64_GPREL32MSB
5651 ENUMX
5652   BFD_RELOC_IA64_GPREL32LSB
5653 ENUMX
5654   BFD_RELOC_IA64_GPREL64MSB
5655 ENUMX
5656   BFD_RELOC_IA64_GPREL64LSB
5657 ENUMX
5658   BFD_RELOC_IA64_LTOFF22
5659 ENUMX
5660   BFD_RELOC_IA64_LTOFF64I
5661 ENUMX
5662   BFD_RELOC_IA64_PLTOFF22
5663 ENUMX
5664   BFD_RELOC_IA64_PLTOFF64I
5665 ENUMX
5666   BFD_RELOC_IA64_PLTOFF64MSB
5667 ENUMX
5668   BFD_RELOC_IA64_PLTOFF64LSB
5669 ENUMX
5670   BFD_RELOC_IA64_FPTR64I
5671 ENUMX
5672   BFD_RELOC_IA64_FPTR32MSB
5673 ENUMX
5674   BFD_RELOC_IA64_FPTR32LSB
5675 ENUMX
5676   BFD_RELOC_IA64_FPTR64MSB
5677 ENUMX
5678   BFD_RELOC_IA64_FPTR64LSB
5679 ENUMX
5680   BFD_RELOC_IA64_PCREL21B
5681 ENUMX
5682   BFD_RELOC_IA64_PCREL21BI
5683 ENUMX
5684   BFD_RELOC_IA64_PCREL21M
5685 ENUMX
5686   BFD_RELOC_IA64_PCREL21F
5687 ENUMX
5688   BFD_RELOC_IA64_PCREL22
5689 ENUMX
5690   BFD_RELOC_IA64_PCREL60B
5691 ENUMX
5692   BFD_RELOC_IA64_PCREL64I
5693 ENUMX
5694   BFD_RELOC_IA64_PCREL32MSB
5695 ENUMX
5696   BFD_RELOC_IA64_PCREL32LSB
5697 ENUMX
5698   BFD_RELOC_IA64_PCREL64MSB
5699 ENUMX
5700   BFD_RELOC_IA64_PCREL64LSB
5701 ENUMX
5702   BFD_RELOC_IA64_LTOFF_FPTR22
5703 ENUMX
5704   BFD_RELOC_IA64_LTOFF_FPTR64I
5705 ENUMX
5706   BFD_RELOC_IA64_LTOFF_FPTR32MSB
5707 ENUMX
5708   BFD_RELOC_IA64_LTOFF_FPTR32LSB
5709 ENUMX
5710   BFD_RELOC_IA64_LTOFF_FPTR64MSB
5711 ENUMX
5712   BFD_RELOC_IA64_LTOFF_FPTR64LSB
5713 ENUMX
5714   BFD_RELOC_IA64_SEGREL32MSB
5715 ENUMX
5716   BFD_RELOC_IA64_SEGREL32LSB
5717 ENUMX
5718   BFD_RELOC_IA64_SEGREL64MSB
5719 ENUMX
5720   BFD_RELOC_IA64_SEGREL64LSB
5721 ENUMX
5722   BFD_RELOC_IA64_SECREL32MSB
5723 ENUMX
5724   BFD_RELOC_IA64_SECREL32LSB
5725 ENUMX
5726   BFD_RELOC_IA64_SECREL64MSB
5727 ENUMX
5728   BFD_RELOC_IA64_SECREL64LSB
5729 ENUMX
5730   BFD_RELOC_IA64_REL32MSB
5731 ENUMX
5732   BFD_RELOC_IA64_REL32LSB
5733 ENUMX
5734   BFD_RELOC_IA64_REL64MSB
5735 ENUMX
5736   BFD_RELOC_IA64_REL64LSB
5737 ENUMX
5738   BFD_RELOC_IA64_LTV32MSB
5739 ENUMX
5740   BFD_RELOC_IA64_LTV32LSB
5741 ENUMX
5742   BFD_RELOC_IA64_LTV64MSB
5743 ENUMX
5744   BFD_RELOC_IA64_LTV64LSB
5745 ENUMX
5746   BFD_RELOC_IA64_IPLTMSB
5747 ENUMX
5748   BFD_RELOC_IA64_IPLTLSB
5749 ENUMX
5750   BFD_RELOC_IA64_COPY
5751 ENUMX
5752   BFD_RELOC_IA64_LTOFF22X
5753 ENUMX
5754   BFD_RELOC_IA64_LDXMOV
5755 ENUMX
5756   BFD_RELOC_IA64_TPREL14
5757 ENUMX
5758   BFD_RELOC_IA64_TPREL22
5759 ENUMX
5760   BFD_RELOC_IA64_TPREL64I
5761 ENUMX
5762   BFD_RELOC_IA64_TPREL64MSB
5763 ENUMX
5764   BFD_RELOC_IA64_TPREL64LSB
5765 ENUMX
5766   BFD_RELOC_IA64_LTOFF_TPREL22
5767 ENUMX
5768   BFD_RELOC_IA64_DTPMOD64MSB
5769 ENUMX
5770   BFD_RELOC_IA64_DTPMOD64LSB
5771 ENUMX
5772   BFD_RELOC_IA64_LTOFF_DTPMOD22
5773 ENUMX
5774   BFD_RELOC_IA64_DTPREL14
5775 ENUMX
5776   BFD_RELOC_IA64_DTPREL22
5777 ENUMX
5778   BFD_RELOC_IA64_DTPREL64I
5779 ENUMX
5780   BFD_RELOC_IA64_DTPREL32MSB
5781 ENUMX
5782   BFD_RELOC_IA64_DTPREL32LSB
5783 ENUMX
5784   BFD_RELOC_IA64_DTPREL64MSB
5785 ENUMX
5786   BFD_RELOC_IA64_DTPREL64LSB
5787 ENUMX
5788   BFD_RELOC_IA64_LTOFF_DTPREL22
5789 ENUMDOC
5790   Intel IA64 Relocations.
5791 
5792 ENUM
5793   BFD_RELOC_M68HC11_HI8
5794 ENUMDOC
5795   Motorola 68HC11 reloc.
5796   This is the 8 bit high part of an absolute address.
5797 ENUM
5798   BFD_RELOC_M68HC11_LO8
5799 ENUMDOC
5800   Motorola 68HC11 reloc.
5801   This is the 8 bit low part of an absolute address.
5802 ENUM
5803   BFD_RELOC_M68HC11_3B
5804 ENUMDOC
5805   Motorola 68HC11 reloc.
5806   This is the 3 bit of a value.
5807 ENUM
5808   BFD_RELOC_M68HC11_RL_JUMP
5809 ENUMDOC
5810   Motorola 68HC11 reloc.
5811   This reloc marks the beginning of a jump/call instruction.
5812   It is used for linker relaxation to correctly identify beginning
5813   of instruction and change some branches to use PC-relative
5814   addressing mode.
5815 ENUM
5816   BFD_RELOC_M68HC11_RL_GROUP
5817 ENUMDOC
5818   Motorola 68HC11 reloc.
5819   This reloc marks a group of several instructions that gcc generates
5820   and for which the linker relaxation pass can modify and/or remove
5821   some of them.
5822 ENUM
5823   BFD_RELOC_M68HC11_LO16
5824 ENUMDOC
5825   Motorola 68HC11 reloc.
5826   This is the 16-bit lower part of an address.  It is used for 'call'
5827   instruction to specify the symbol address without any special
5828   transformation (due to memory bank window).
5829 ENUM
5830   BFD_RELOC_M68HC11_PAGE
5831 ENUMDOC
5832   Motorola 68HC11 reloc.
5833   This is a 8-bit reloc that specifies the page number of an address.
5834   It is used by 'call' instruction to specify the page number of
5835   the symbol.
5836 ENUM
5837   BFD_RELOC_M68HC11_24
5838 ENUMDOC
5839   Motorola 68HC11 reloc.
5840   This is a 24-bit reloc that represents the address with a 16-bit
5841   value and a 8-bit page number.  The symbol address is transformed
5842   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
5843 ENUM
5844   BFD_RELOC_M68HC12_5B
5845 ENUMDOC
5846   Motorola 68HC12 reloc.
5847   This is the 5 bits of a value.
5848 ENUM
5849   BFD_RELOC_XGATE_RL_JUMP
5850 ENUMDOC
5851   Freescale XGATE reloc.
5852   This reloc marks the beginning of a bra/jal instruction.
5853 ENUM
5854   BFD_RELOC_XGATE_RL_GROUP
5855 ENUMDOC
5856   Freescale XGATE reloc.
5857   This reloc marks a group of several instructions that gcc generates
5858   and for which the linker relaxation pass can modify and/or remove
5859   some of them.
5860 ENUM
5861   BFD_RELOC_XGATE_LO16
5862 ENUMDOC
5863   Freescale XGATE reloc.
5864   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5865   instructions.
5866 ENUM
5867   BFD_RELOC_XGATE_GPAGE
5868 ENUMDOC
5869   Freescale XGATE reloc.
5870 ENUM
5871   BFD_RELOC_XGATE_24
5872 ENUMDOC
5873   Freescale XGATE reloc.
5874 ENUM
5875   BFD_RELOC_XGATE_PCREL_9
5876 ENUMDOC
5877   Freescale XGATE reloc.
5878   This is a 9-bit pc-relative reloc.
5879 ENUM
5880   BFD_RELOC_XGATE_PCREL_10
5881 ENUMDOC
5882   Freescale XGATE reloc.
5883   This is a 10-bit pc-relative reloc.
5884 ENUM
5885   BFD_RELOC_XGATE_IMM8_LO
5886 ENUMDOC
5887   Freescale XGATE reloc.
5888   This is the 16-bit lower part of an address.  It is used for the '16-bit'
5889   instructions.
5890 ENUM
5891   BFD_RELOC_XGATE_IMM8_HI
5892 ENUMDOC
5893   Freescale XGATE reloc.
5894   This is the 16-bit higher part of an address.  It is used for the '16-bit'
5895   instructions.
5896 ENUM
5897   BFD_RELOC_XGATE_IMM3
5898 ENUMDOC
5899   Freescale XGATE reloc.
5900   This is a 3-bit pc-relative reloc.
5901 ENUM
5902   BFD_RELOC_XGATE_IMM4
5903 ENUMDOC
5904   Freescale XGATE reloc.
5905   This is a 4-bit pc-relative reloc.
5906 ENUM
5907   BFD_RELOC_XGATE_IMM5
5908 ENUMDOC
5909   Freescale XGATE reloc.
5910   This is a 5-bit pc-relative reloc.
5911 ENUM
5912   BFD_RELOC_M68HC12_9B
5913 ENUMDOC
5914   Motorola 68HC12 reloc.
5915   This is the 9 bits of a value.
5916 ENUM
5917   BFD_RELOC_M68HC12_16B
5918 ENUMDOC
5919   Motorola 68HC12 reloc.
5920   This is the 16 bits of a value.
5921 ENUM
5922   BFD_RELOC_M68HC12_9_PCREL
5923 ENUMDOC
5924   Motorola 68HC12/XGATE reloc.
5925   This is a PCREL9 branch.
5926 ENUM
5927   BFD_RELOC_M68HC12_10_PCREL
5928 ENUMDOC
5929   Motorola 68HC12/XGATE reloc.
5930   This is a PCREL10 branch.
5931 ENUM
5932   BFD_RELOC_M68HC12_LO8XG
5933 ENUMDOC
5934   Motorola 68HC12/XGATE reloc.
5935   This is the 8 bit low part of an absolute address and immediately precedes
5936   a matching HI8XG part.
5937 ENUM
5938   BFD_RELOC_M68HC12_HI8XG
5939 ENUMDOC
5940   Motorola 68HC12/XGATE reloc.
5941   This is the 8 bit high part of an absolute address and immediately follows
5942   a matching LO8XG part.
5943 ENUM
5944   BFD_RELOC_16C_NUM08
5945 ENUMX
5946   BFD_RELOC_16C_NUM08_C
5947 ENUMX
5948   BFD_RELOC_16C_NUM16
5949 ENUMX
5950   BFD_RELOC_16C_NUM16_C
5951 ENUMX
5952   BFD_RELOC_16C_NUM32
5953 ENUMX
5954   BFD_RELOC_16C_NUM32_C
5955 ENUMX
5956   BFD_RELOC_16C_DISP04
5957 ENUMX
5958   BFD_RELOC_16C_DISP04_C
5959 ENUMX
5960   BFD_RELOC_16C_DISP08
5961 ENUMX
5962   BFD_RELOC_16C_DISP08_C
5963 ENUMX
5964   BFD_RELOC_16C_DISP16
5965 ENUMX
5966   BFD_RELOC_16C_DISP16_C
5967 ENUMX
5968   BFD_RELOC_16C_DISP24
5969 ENUMX
5970   BFD_RELOC_16C_DISP24_C
5971 ENUMX
5972   BFD_RELOC_16C_DISP24a
5973 ENUMX
5974   BFD_RELOC_16C_DISP24a_C
5975 ENUMX
5976   BFD_RELOC_16C_REG04
5977 ENUMX
5978   BFD_RELOC_16C_REG04_C
5979 ENUMX
5980   BFD_RELOC_16C_REG04a
5981 ENUMX
5982   BFD_RELOC_16C_REG04a_C
5983 ENUMX
5984   BFD_RELOC_16C_REG14
5985 ENUMX
5986   BFD_RELOC_16C_REG14_C
5987 ENUMX
5988   BFD_RELOC_16C_REG16
5989 ENUMX
5990   BFD_RELOC_16C_REG16_C
5991 ENUMX
5992   BFD_RELOC_16C_REG20
5993 ENUMX
5994   BFD_RELOC_16C_REG20_C
5995 ENUMX
5996   BFD_RELOC_16C_ABS20
5997 ENUMX
5998   BFD_RELOC_16C_ABS20_C
5999 ENUMX
6000   BFD_RELOC_16C_ABS24
6001 ENUMX
6002   BFD_RELOC_16C_ABS24_C
6003 ENUMX
6004   BFD_RELOC_16C_IMM04
6005 ENUMX
6006   BFD_RELOC_16C_IMM04_C
6007 ENUMX
6008   BFD_RELOC_16C_IMM16
6009 ENUMX
6010   BFD_RELOC_16C_IMM16_C
6011 ENUMX
6012   BFD_RELOC_16C_IMM20
6013 ENUMX
6014   BFD_RELOC_16C_IMM20_C
6015 ENUMX
6016   BFD_RELOC_16C_IMM24
6017 ENUMX
6018   BFD_RELOC_16C_IMM24_C
6019 ENUMX
6020   BFD_RELOC_16C_IMM32
6021 ENUMX
6022   BFD_RELOC_16C_IMM32_C
6023 ENUMDOC
6024   NS CR16C Relocations.
6025 
6026 ENUM
6027   BFD_RELOC_CR16_NUM8
6028 ENUMX
6029   BFD_RELOC_CR16_NUM16
6030 ENUMX
6031   BFD_RELOC_CR16_NUM32
6032 ENUMX
6033   BFD_RELOC_CR16_NUM32a
6034 ENUMX
6035   BFD_RELOC_CR16_REGREL0
6036 ENUMX
6037   BFD_RELOC_CR16_REGREL4
6038 ENUMX
6039   BFD_RELOC_CR16_REGREL4a
6040 ENUMX
6041   BFD_RELOC_CR16_REGREL14
6042 ENUMX
6043   BFD_RELOC_CR16_REGREL14a
6044 ENUMX
6045   BFD_RELOC_CR16_REGREL16
6046 ENUMX
6047   BFD_RELOC_CR16_REGREL20
6048 ENUMX
6049   BFD_RELOC_CR16_REGREL20a
6050 ENUMX
6051   BFD_RELOC_CR16_ABS20
6052 ENUMX
6053   BFD_RELOC_CR16_ABS24
6054 ENUMX
6055   BFD_RELOC_CR16_IMM4
6056 ENUMX
6057   BFD_RELOC_CR16_IMM8
6058 ENUMX
6059   BFD_RELOC_CR16_IMM16
6060 ENUMX
6061   BFD_RELOC_CR16_IMM20
6062 ENUMX
6063   BFD_RELOC_CR16_IMM24
6064 ENUMX
6065   BFD_RELOC_CR16_IMM32
6066 ENUMX
6067   BFD_RELOC_CR16_IMM32a
6068 ENUMX
6069   BFD_RELOC_CR16_DISP4
6070 ENUMX
6071   BFD_RELOC_CR16_DISP8
6072 ENUMX
6073   BFD_RELOC_CR16_DISP16
6074 ENUMX
6075   BFD_RELOC_CR16_DISP20
6076 ENUMX
6077   BFD_RELOC_CR16_DISP24
6078 ENUMX
6079   BFD_RELOC_CR16_DISP24a
6080 ENUMX
6081   BFD_RELOC_CR16_SWITCH8
6082 ENUMX
6083   BFD_RELOC_CR16_SWITCH16
6084 ENUMX
6085   BFD_RELOC_CR16_SWITCH32
6086 ENUMX
6087   BFD_RELOC_CR16_GOT_REGREL20
6088 ENUMX
6089   BFD_RELOC_CR16_GOTC_REGREL20
6090 ENUMX
6091   BFD_RELOC_CR16_GLOB_DAT
6092 ENUMDOC
6093   NS CR16 Relocations.
6094 
6095 ENUM
6096   BFD_RELOC_CRX_REL4
6097 ENUMX
6098   BFD_RELOC_CRX_REL8
6099 ENUMX
6100   BFD_RELOC_CRX_REL8_CMP
6101 ENUMX
6102   BFD_RELOC_CRX_REL16
6103 ENUMX
6104   BFD_RELOC_CRX_REL24
6105 ENUMX
6106   BFD_RELOC_CRX_REL32
6107 ENUMX
6108   BFD_RELOC_CRX_REGREL12
6109 ENUMX
6110   BFD_RELOC_CRX_REGREL22
6111 ENUMX
6112   BFD_RELOC_CRX_REGREL28
6113 ENUMX
6114   BFD_RELOC_CRX_REGREL32
6115 ENUMX
6116   BFD_RELOC_CRX_ABS16
6117 ENUMX
6118   BFD_RELOC_CRX_ABS32
6119 ENUMX
6120   BFD_RELOC_CRX_NUM8
6121 ENUMX
6122   BFD_RELOC_CRX_NUM16
6123 ENUMX
6124   BFD_RELOC_CRX_NUM32
6125 ENUMX
6126   BFD_RELOC_CRX_IMM16
6127 ENUMX
6128   BFD_RELOC_CRX_IMM32
6129 ENUMX
6130   BFD_RELOC_CRX_SWITCH8
6131 ENUMX
6132   BFD_RELOC_CRX_SWITCH16
6133 ENUMX
6134   BFD_RELOC_CRX_SWITCH32
6135 ENUMDOC
6136   NS CRX Relocations.
6137 
6138 ENUM
6139   BFD_RELOC_CRIS_BDISP8
6140 ENUMX
6141   BFD_RELOC_CRIS_UNSIGNED_5
6142 ENUMX
6143   BFD_RELOC_CRIS_SIGNED_6
6144 ENUMX
6145   BFD_RELOC_CRIS_UNSIGNED_6
6146 ENUMX
6147   BFD_RELOC_CRIS_SIGNED_8
6148 ENUMX
6149   BFD_RELOC_CRIS_UNSIGNED_8
6150 ENUMX
6151   BFD_RELOC_CRIS_SIGNED_16
6152 ENUMX
6153   BFD_RELOC_CRIS_UNSIGNED_16
6154 ENUMX
6155   BFD_RELOC_CRIS_LAPCQ_OFFSET
6156 ENUMX
6157   BFD_RELOC_CRIS_UNSIGNED_4
6158 ENUMDOC
6159   These relocs are only used within the CRIS assembler.  They are not
6160   (at present) written to any object files.
6161 ENUM
6162   BFD_RELOC_CRIS_COPY
6163 ENUMX
6164   BFD_RELOC_CRIS_GLOB_DAT
6165 ENUMX
6166   BFD_RELOC_CRIS_JUMP_SLOT
6167 ENUMX
6168   BFD_RELOC_CRIS_RELATIVE
6169 ENUMDOC
6170   Relocs used in ELF shared libraries for CRIS.
6171 ENUM
6172   BFD_RELOC_CRIS_32_GOT
6173 ENUMDOC
6174   32-bit offset to symbol-entry within GOT.
6175 ENUM
6176   BFD_RELOC_CRIS_16_GOT
6177 ENUMDOC
6178   16-bit offset to symbol-entry within GOT.
6179 ENUM
6180   BFD_RELOC_CRIS_32_GOTPLT
6181 ENUMDOC
6182   32-bit offset to symbol-entry within GOT, with PLT handling.
6183 ENUM
6184   BFD_RELOC_CRIS_16_GOTPLT
6185 ENUMDOC
6186   16-bit offset to symbol-entry within GOT, with PLT handling.
6187 ENUM
6188   BFD_RELOC_CRIS_32_GOTREL
6189 ENUMDOC
6190   32-bit offset to symbol, relative to GOT.
6191 ENUM
6192   BFD_RELOC_CRIS_32_PLT_GOTREL
6193 ENUMDOC
6194   32-bit offset to symbol with PLT entry, relative to GOT.
6195 ENUM
6196   BFD_RELOC_CRIS_32_PLT_PCREL
6197 ENUMDOC
6198   32-bit offset to symbol with PLT entry, relative to this relocation.
6199 
6200 ENUM
6201   BFD_RELOC_CRIS_32_GOT_GD
6202 ENUMX
6203   BFD_RELOC_CRIS_16_GOT_GD
6204 ENUMX
6205   BFD_RELOC_CRIS_32_GD
6206 ENUMX
6207   BFD_RELOC_CRIS_DTP
6208 ENUMX
6209   BFD_RELOC_CRIS_32_DTPREL
6210 ENUMX
6211   BFD_RELOC_CRIS_16_DTPREL
6212 ENUMX
6213   BFD_RELOC_CRIS_32_GOT_TPREL
6214 ENUMX
6215   BFD_RELOC_CRIS_16_GOT_TPREL
6216 ENUMX
6217   BFD_RELOC_CRIS_32_TPREL
6218 ENUMX
6219   BFD_RELOC_CRIS_16_TPREL
6220 ENUMX
6221   BFD_RELOC_CRIS_DTPMOD
6222 ENUMX
6223   BFD_RELOC_CRIS_32_IE
6224 ENUMDOC
6225   Relocs used in TLS code for CRIS.
6226 
6227 ENUM
6228   BFD_RELOC_860_COPY
6229 ENUMX
6230   BFD_RELOC_860_GLOB_DAT
6231 ENUMX
6232   BFD_RELOC_860_JUMP_SLOT
6233 ENUMX
6234   BFD_RELOC_860_RELATIVE
6235 ENUMX
6236   BFD_RELOC_860_PC26
6237 ENUMX
6238   BFD_RELOC_860_PLT26
6239 ENUMX
6240   BFD_RELOC_860_PC16
6241 ENUMX
6242   BFD_RELOC_860_LOW0
6243 ENUMX
6244   BFD_RELOC_860_SPLIT0
6245 ENUMX
6246   BFD_RELOC_860_LOW1
6247 ENUMX
6248   BFD_RELOC_860_SPLIT1
6249 ENUMX
6250   BFD_RELOC_860_LOW2
6251 ENUMX
6252   BFD_RELOC_860_SPLIT2
6253 ENUMX
6254   BFD_RELOC_860_LOW3
6255 ENUMX
6256   BFD_RELOC_860_LOGOT0
6257 ENUMX
6258   BFD_RELOC_860_SPGOT0
6259 ENUMX
6260   BFD_RELOC_860_LOGOT1
6261 ENUMX
6262   BFD_RELOC_860_SPGOT1
6263 ENUMX
6264   BFD_RELOC_860_LOGOTOFF0
6265 ENUMX
6266   BFD_RELOC_860_SPGOTOFF0
6267 ENUMX
6268   BFD_RELOC_860_LOGOTOFF1
6269 ENUMX
6270   BFD_RELOC_860_SPGOTOFF1
6271 ENUMX
6272   BFD_RELOC_860_LOGOTOFF2
6273 ENUMX
6274   BFD_RELOC_860_LOGOTOFF3
6275 ENUMX
6276   BFD_RELOC_860_LOPC
6277 ENUMX
6278   BFD_RELOC_860_HIGHADJ
6279 ENUMX
6280   BFD_RELOC_860_HAGOT
6281 ENUMX
6282   BFD_RELOC_860_HAGOTOFF
6283 ENUMX
6284   BFD_RELOC_860_HAPC
6285 ENUMX
6286   BFD_RELOC_860_HIGH
6287 ENUMX
6288   BFD_RELOC_860_HIGOT
6289 ENUMX
6290   BFD_RELOC_860_HIGOTOFF
6291 ENUMDOC
6292   Intel i860 Relocations.
6293 
6294 ENUM
6295   BFD_RELOC_OR1K_REL_26
6296 ENUMX
6297   BFD_RELOC_OR1K_GOTPC_HI16
6298 ENUMX
6299   BFD_RELOC_OR1K_GOTPC_LO16
6300 ENUMX
6301   BFD_RELOC_OR1K_GOT16
6302 ENUMX
6303   BFD_RELOC_OR1K_PLT26
6304 ENUMX
6305   BFD_RELOC_OR1K_GOTOFF_HI16
6306 ENUMX
6307   BFD_RELOC_OR1K_GOTOFF_LO16
6308 ENUMX
6309   BFD_RELOC_OR1K_COPY
6310 ENUMX
6311   BFD_RELOC_OR1K_GLOB_DAT
6312 ENUMX
6313   BFD_RELOC_OR1K_JMP_SLOT
6314 ENUMX
6315   BFD_RELOC_OR1K_RELATIVE
6316 ENUMX
6317   BFD_RELOC_OR1K_TLS_GD_HI16
6318 ENUMX
6319   BFD_RELOC_OR1K_TLS_GD_LO16
6320 ENUMX
6321   BFD_RELOC_OR1K_TLS_LDM_HI16
6322 ENUMX
6323   BFD_RELOC_OR1K_TLS_LDM_LO16
6324 ENUMX
6325   BFD_RELOC_OR1K_TLS_LDO_HI16
6326 ENUMX
6327   BFD_RELOC_OR1K_TLS_LDO_LO16
6328 ENUMX
6329   BFD_RELOC_OR1K_TLS_IE_HI16
6330 ENUMX
6331   BFD_RELOC_OR1K_TLS_IE_LO16
6332 ENUMX
6333   BFD_RELOC_OR1K_TLS_LE_HI16
6334 ENUMX
6335   BFD_RELOC_OR1K_TLS_LE_LO16
6336 ENUMX
6337   BFD_RELOC_OR1K_TLS_TPOFF
6338 ENUMX
6339   BFD_RELOC_OR1K_TLS_DTPOFF
6340 ENUMX
6341   BFD_RELOC_OR1K_TLS_DTPMOD
6342 ENUMDOC
6343   OpenRISC 1000 Relocations.
6344 
6345 ENUM
6346   BFD_RELOC_H8_DIR16A8
6347 ENUMX
6348   BFD_RELOC_H8_DIR16R8
6349 ENUMX
6350   BFD_RELOC_H8_DIR24A8
6351 ENUMX
6352   BFD_RELOC_H8_DIR24R8
6353 ENUMX
6354   BFD_RELOC_H8_DIR32A16
6355 ENUMX
6356   BFD_RELOC_H8_DISP32A16
6357 ENUMDOC
6358   H8 elf Relocations.
6359 
6360 ENUM
6361   BFD_RELOC_XSTORMY16_REL_12
6362 ENUMX
6363   BFD_RELOC_XSTORMY16_12
6364 ENUMX
6365   BFD_RELOC_XSTORMY16_24
6366 ENUMX
6367   BFD_RELOC_XSTORMY16_FPTR16
6368 ENUMDOC
6369   Sony Xstormy16 Relocations.
6370 
6371 ENUM
6372   BFD_RELOC_RELC
6373 ENUMDOC
6374   Self-describing complex relocations.
6375 COMMENT
6376 
6377 ENUM
6378   BFD_RELOC_XC16X_PAG
6379 ENUMX
6380   BFD_RELOC_XC16X_POF
6381 ENUMX
6382   BFD_RELOC_XC16X_SEG
6383 ENUMX
6384   BFD_RELOC_XC16X_SOF
6385 ENUMDOC
6386   Infineon Relocations.
6387 
6388 ENUM
6389   BFD_RELOC_VAX_GLOB_DAT
6390 ENUMX
6391   BFD_RELOC_VAX_JMP_SLOT
6392 ENUMX
6393   BFD_RELOC_VAX_RELATIVE
6394 ENUMDOC
6395   Relocations used by VAX ELF.
6396 
6397 ENUM
6398   BFD_RELOC_MT_PC16
6399 ENUMDOC
6400   Morpho MT - 16 bit immediate relocation.
6401 ENUM
6402   BFD_RELOC_MT_HI16
6403 ENUMDOC
6404   Morpho MT - Hi 16 bits of an address.
6405 ENUM
6406   BFD_RELOC_MT_LO16
6407 ENUMDOC
6408   Morpho MT - Low 16 bits of an address.
6409 ENUM
6410   BFD_RELOC_MT_GNU_VTINHERIT
6411 ENUMDOC
6412   Morpho MT - Used to tell the linker which vtable entries are used.
6413 ENUM
6414   BFD_RELOC_MT_GNU_VTENTRY
6415 ENUMDOC
6416   Morpho MT - Used to tell the linker which vtable entries are used.
6417 ENUM
6418   BFD_RELOC_MT_PCINSN8
6419 ENUMDOC
6420   Morpho MT - 8 bit immediate relocation.
6421 
6422 ENUM
6423   BFD_RELOC_MSP430_10_PCREL
6424 ENUMX
6425   BFD_RELOC_MSP430_16_PCREL
6426 ENUMX
6427   BFD_RELOC_MSP430_16
6428 ENUMX
6429   BFD_RELOC_MSP430_16_PCREL_BYTE
6430 ENUMX
6431   BFD_RELOC_MSP430_16_BYTE
6432 ENUMX
6433   BFD_RELOC_MSP430_2X_PCREL
6434 ENUMX
6435   BFD_RELOC_MSP430_RL_PCREL
6436 ENUMX
6437   BFD_RELOC_MSP430_ABS8
6438 ENUMX
6439   BFD_RELOC_MSP430X_PCR20_EXT_SRC
6440 ENUMX
6441   BFD_RELOC_MSP430X_PCR20_EXT_DST
6442 ENUMX
6443   BFD_RELOC_MSP430X_PCR20_EXT_ODST
6444 ENUMX
6445   BFD_RELOC_MSP430X_ABS20_EXT_SRC
6446 ENUMX
6447   BFD_RELOC_MSP430X_ABS20_EXT_DST
6448 ENUMX
6449   BFD_RELOC_MSP430X_ABS20_EXT_ODST
6450 ENUMX
6451   BFD_RELOC_MSP430X_ABS20_ADR_SRC
6452 ENUMX
6453   BFD_RELOC_MSP430X_ABS20_ADR_DST
6454 ENUMX
6455   BFD_RELOC_MSP430X_PCR16
6456 ENUMX
6457   BFD_RELOC_MSP430X_PCR20_CALL
6458 ENUMX
6459   BFD_RELOC_MSP430X_ABS16
6460 ENUMX
6461   BFD_RELOC_MSP430_ABS_HI16
6462 ENUMX
6463   BFD_RELOC_MSP430_PREL31
6464 ENUMX
6465   BFD_RELOC_MSP430_SYM_DIFF
6466 ENUMDOC
6467   msp430 specific relocation codes
6468 
6469 ENUM
6470   BFD_RELOC_NIOS2_S16
6471 ENUMX
6472   BFD_RELOC_NIOS2_U16
6473 ENUMX
6474   BFD_RELOC_NIOS2_CALL26
6475 ENUMX
6476   BFD_RELOC_NIOS2_IMM5
6477 ENUMX
6478   BFD_RELOC_NIOS2_CACHE_OPX
6479 ENUMX
6480   BFD_RELOC_NIOS2_IMM6
6481 ENUMX
6482   BFD_RELOC_NIOS2_IMM8
6483 ENUMX
6484   BFD_RELOC_NIOS2_HI16
6485 ENUMX
6486   BFD_RELOC_NIOS2_LO16
6487 ENUMX
6488   BFD_RELOC_NIOS2_HIADJ16
6489 ENUMX
6490   BFD_RELOC_NIOS2_GPREL
6491 ENUMX
6492   BFD_RELOC_NIOS2_UJMP
6493 ENUMX
6494   BFD_RELOC_NIOS2_CJMP
6495 ENUMX
6496   BFD_RELOC_NIOS2_CALLR
6497 ENUMX
6498   BFD_RELOC_NIOS2_ALIGN
6499 ENUMX
6500   BFD_RELOC_NIOS2_GOT16
6501 ENUMX
6502   BFD_RELOC_NIOS2_CALL16
6503 ENUMX
6504   BFD_RELOC_NIOS2_GOTOFF_LO
6505 ENUMX
6506   BFD_RELOC_NIOS2_GOTOFF_HA
6507 ENUMX
6508   BFD_RELOC_NIOS2_PCREL_LO
6509 ENUMX
6510   BFD_RELOC_NIOS2_PCREL_HA
6511 ENUMX
6512   BFD_RELOC_NIOS2_TLS_GD16
6513 ENUMX
6514   BFD_RELOC_NIOS2_TLS_LDM16
6515 ENUMX
6516   BFD_RELOC_NIOS2_TLS_LDO16
6517 ENUMX
6518   BFD_RELOC_NIOS2_TLS_IE16
6519 ENUMX
6520   BFD_RELOC_NIOS2_TLS_LE16
6521 ENUMX
6522   BFD_RELOC_NIOS2_TLS_DTPMOD
6523 ENUMX
6524   BFD_RELOC_NIOS2_TLS_DTPREL
6525 ENUMX
6526   BFD_RELOC_NIOS2_TLS_TPREL
6527 ENUMX
6528   BFD_RELOC_NIOS2_COPY
6529 ENUMX
6530   BFD_RELOC_NIOS2_GLOB_DAT
6531 ENUMX
6532   BFD_RELOC_NIOS2_JUMP_SLOT
6533 ENUMX
6534   BFD_RELOC_NIOS2_RELATIVE
6535 ENUMX
6536   BFD_RELOC_NIOS2_GOTOFF
6537 ENUMX
6538   BFD_RELOC_NIOS2_CALL26_NOAT
6539 ENUMX
6540   BFD_RELOC_NIOS2_GOT_LO
6541 ENUMX
6542   BFD_RELOC_NIOS2_GOT_HA
6543 ENUMX
6544   BFD_RELOC_NIOS2_CALL_LO
6545 ENUMX
6546   BFD_RELOC_NIOS2_CALL_HA
6547 ENUMX
6548   BFD_RELOC_NIOS2_R2_S12
6549 ENUMX
6550   BFD_RELOC_NIOS2_R2_I10_1_PCREL
6551 ENUMX
6552   BFD_RELOC_NIOS2_R2_T1I7_1_PCREL
6553 ENUMX
6554   BFD_RELOC_NIOS2_R2_T1I7_2
6555 ENUMX
6556   BFD_RELOC_NIOS2_R2_T2I4
6557 ENUMX
6558   BFD_RELOC_NIOS2_R2_T2I4_1
6559 ENUMX
6560   BFD_RELOC_NIOS2_R2_T2I4_2
6561 ENUMX
6562   BFD_RELOC_NIOS2_R2_X1I7_2
6563 ENUMX
6564   BFD_RELOC_NIOS2_R2_X2L5
6565 ENUMX
6566   BFD_RELOC_NIOS2_R2_F1I5_2
6567 ENUMX
6568   BFD_RELOC_NIOS2_R2_L5I4X1
6569 ENUMX
6570   BFD_RELOC_NIOS2_R2_T1X1I6
6571 ENUMX
6572   BFD_RELOC_NIOS2_R2_T1X1I6_2
6573 ENUMDOC
6574   Relocations used by the Altera Nios II core.
6575 
6576 ENUM
6577   BFD_RELOC_PRU_U16
6578 ENUMDOC
6579   PRU LDI 16-bit unsigned data-memory relocation.
6580 ENUM
6581   BFD_RELOC_PRU_U16_PMEMIMM
6582 ENUMDOC
6583   PRU LDI 16-bit unsigned instruction-memory relocation.
6584 ENUM
6585   BFD_RELOC_PRU_LDI32
6586 ENUMDOC
6587   PRU relocation for two consecutive LDI load instructions that load a
6588   32 bit value into a register. If the higher bits are all zero, then
6589   the second instruction may be relaxed.
6590 ENUM
6591   BFD_RELOC_PRU_S10_PCREL
6592 ENUMDOC
6593   PRU QBBx 10-bit signed PC-relative relocation.
6594 ENUM
6595   BFD_RELOC_PRU_U8_PCREL
6596 ENUMDOC
6597   PRU 8-bit unsigned relocation used for the LOOP instruction.
6598 ENUM
6599   BFD_RELOC_PRU_32_PMEM
6600 ENUMX
6601   BFD_RELOC_PRU_16_PMEM
6602 ENUMDOC
6603   PRU Program Memory relocations.  Used to convert from byte addressing to
6604   32-bit word addressing.
6605 ENUM
6606   BFD_RELOC_PRU_GNU_DIFF8
6607 ENUMX
6608   BFD_RELOC_PRU_GNU_DIFF16
6609 ENUMX
6610   BFD_RELOC_PRU_GNU_DIFF32
6611 ENUMX
6612   BFD_RELOC_PRU_GNU_DIFF16_PMEM
6613 ENUMX
6614   BFD_RELOC_PRU_GNU_DIFF32_PMEM
6615 ENUMDOC
6616   PRU relocations to mark the difference of two local symbols.
6617   These are only needed to support linker relaxation and can be ignored
6618   when not relaxing.  The field is set to the value of the difference
6619   assuming no relaxation.  The relocation encodes the position of the
6620   second symbol so the linker can determine whether to adjust the field
6621   value. The PMEM variants encode the word difference, instead of byte
6622   difference between symbols.
6623 
6624 ENUM
6625   BFD_RELOC_IQ2000_OFFSET_16
6626 ENUMX
6627   BFD_RELOC_IQ2000_OFFSET_21
6628 ENUMX
6629   BFD_RELOC_IQ2000_UHI16
6630 ENUMDOC
6631   IQ2000 Relocations.
6632 
6633 ENUM
6634   BFD_RELOC_XTENSA_RTLD
6635 ENUMDOC
6636   Special Xtensa relocation used only by PLT entries in ELF shared
6637   objects to indicate that the runtime linker should set the value
6638   to one of its own internal functions or data structures.
6639 ENUM
6640   BFD_RELOC_XTENSA_GLOB_DAT
6641 ENUMX
6642   BFD_RELOC_XTENSA_JMP_SLOT
6643 ENUMX
6644   BFD_RELOC_XTENSA_RELATIVE
6645 ENUMDOC
6646   Xtensa relocations for ELF shared objects.
6647 ENUM
6648   BFD_RELOC_XTENSA_PLT
6649 ENUMDOC
6650   Xtensa relocation used in ELF object files for symbols that may require
6651   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
6652 ENUM
6653   BFD_RELOC_XTENSA_DIFF8
6654 ENUMX
6655   BFD_RELOC_XTENSA_DIFF16
6656 ENUMX
6657   BFD_RELOC_XTENSA_DIFF32
6658 ENUMDOC
6659   Xtensa relocations to mark the difference of two local symbols.
6660   These are only needed to support linker relaxation and can be ignored
6661   when not relaxing.  The field is set to the value of the difference
6662   assuming no relaxation.  The relocation encodes the position of the
6663   first symbol so the linker can determine whether to adjust the field
6664   value.
6665 ENUM
6666   BFD_RELOC_XTENSA_SLOT0_OP
6667 ENUMX
6668   BFD_RELOC_XTENSA_SLOT1_OP
6669 ENUMX
6670   BFD_RELOC_XTENSA_SLOT2_OP
6671 ENUMX
6672   BFD_RELOC_XTENSA_SLOT3_OP
6673 ENUMX
6674   BFD_RELOC_XTENSA_SLOT4_OP
6675 ENUMX
6676   BFD_RELOC_XTENSA_SLOT5_OP
6677 ENUMX
6678   BFD_RELOC_XTENSA_SLOT6_OP
6679 ENUMX
6680   BFD_RELOC_XTENSA_SLOT7_OP
6681 ENUMX
6682   BFD_RELOC_XTENSA_SLOT8_OP
6683 ENUMX
6684   BFD_RELOC_XTENSA_SLOT9_OP
6685 ENUMX
6686   BFD_RELOC_XTENSA_SLOT10_OP
6687 ENUMX
6688   BFD_RELOC_XTENSA_SLOT11_OP
6689 ENUMX
6690   BFD_RELOC_XTENSA_SLOT12_OP
6691 ENUMX
6692   BFD_RELOC_XTENSA_SLOT13_OP
6693 ENUMX
6694   BFD_RELOC_XTENSA_SLOT14_OP
6695 ENUMDOC
6696   Generic Xtensa relocations for instruction operands.  Only the slot
6697   number is encoded in the relocation.  The relocation applies to the
6698   last PC-relative immediate operand, or if there are no PC-relative
6699   immediates, to the last immediate operand.
6700 ENUM
6701   BFD_RELOC_XTENSA_SLOT0_ALT
6702 ENUMX
6703   BFD_RELOC_XTENSA_SLOT1_ALT
6704 ENUMX
6705   BFD_RELOC_XTENSA_SLOT2_ALT
6706 ENUMX
6707   BFD_RELOC_XTENSA_SLOT3_ALT
6708 ENUMX
6709   BFD_RELOC_XTENSA_SLOT4_ALT
6710 ENUMX
6711   BFD_RELOC_XTENSA_SLOT5_ALT
6712 ENUMX
6713   BFD_RELOC_XTENSA_SLOT6_ALT
6714 ENUMX
6715   BFD_RELOC_XTENSA_SLOT7_ALT
6716 ENUMX
6717   BFD_RELOC_XTENSA_SLOT8_ALT
6718 ENUMX
6719   BFD_RELOC_XTENSA_SLOT9_ALT
6720 ENUMX
6721   BFD_RELOC_XTENSA_SLOT10_ALT
6722 ENUMX
6723   BFD_RELOC_XTENSA_SLOT11_ALT
6724 ENUMX
6725   BFD_RELOC_XTENSA_SLOT12_ALT
6726 ENUMX
6727   BFD_RELOC_XTENSA_SLOT13_ALT
6728 ENUMX
6729   BFD_RELOC_XTENSA_SLOT14_ALT
6730 ENUMDOC
6731   Alternate Xtensa relocations.  Only the slot is encoded in the
6732   relocation.  The meaning of these relocations is opcode-specific.
6733 ENUM
6734   BFD_RELOC_XTENSA_OP0
6735 ENUMX
6736   BFD_RELOC_XTENSA_OP1
6737 ENUMX
6738   BFD_RELOC_XTENSA_OP2
6739 ENUMDOC
6740   Xtensa relocations for backward compatibility.  These have all been
6741   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
6742 ENUM
6743   BFD_RELOC_XTENSA_ASM_EXPAND
6744 ENUMDOC
6745   Xtensa relocation to mark that the assembler expanded the
6746   instructions from an original target.  The expansion size is
6747   encoded in the reloc size.
6748 ENUM
6749   BFD_RELOC_XTENSA_ASM_SIMPLIFY
6750 ENUMDOC
6751   Xtensa relocation to mark that the linker should simplify
6752   assembler-expanded instructions.  This is commonly used
6753   internally by the linker after analysis of a
6754   BFD_RELOC_XTENSA_ASM_EXPAND.
6755 ENUM
6756   BFD_RELOC_XTENSA_TLSDESC_FN
6757 ENUMX
6758   BFD_RELOC_XTENSA_TLSDESC_ARG
6759 ENUMX
6760   BFD_RELOC_XTENSA_TLS_DTPOFF
6761 ENUMX
6762   BFD_RELOC_XTENSA_TLS_TPOFF
6763 ENUMX
6764   BFD_RELOC_XTENSA_TLS_FUNC
6765 ENUMX
6766   BFD_RELOC_XTENSA_TLS_ARG
6767 ENUMX
6768   BFD_RELOC_XTENSA_TLS_CALL
6769 ENUMDOC
6770   Xtensa TLS relocations.
6771 
6772 ENUM
6773   BFD_RELOC_Z80_DISP8
6774 ENUMDOC
6775   8 bit signed offset in (ix+d) or (iy+d).
6776 
6777 ENUM
6778   BFD_RELOC_Z8K_DISP7
6779 ENUMDOC
6780   DJNZ offset.
6781 ENUM
6782   BFD_RELOC_Z8K_CALLR
6783 ENUMDOC
6784   CALR offset.
6785 ENUM
6786   BFD_RELOC_Z8K_IMM4L
6787 ENUMDOC
6788   4 bit value.
6789 
6790 ENUM
6791    BFD_RELOC_LM32_CALL
6792 ENUMX
6793    BFD_RELOC_LM32_BRANCH
6794 ENUMX
6795    BFD_RELOC_LM32_16_GOT
6796 ENUMX
6797    BFD_RELOC_LM32_GOTOFF_HI16
6798 ENUMX
6799    BFD_RELOC_LM32_GOTOFF_LO16
6800 ENUMX
6801    BFD_RELOC_LM32_COPY
6802 ENUMX
6803    BFD_RELOC_LM32_GLOB_DAT
6804 ENUMX
6805    BFD_RELOC_LM32_JMP_SLOT
6806 ENUMX
6807    BFD_RELOC_LM32_RELATIVE
6808 ENUMDOC
6809  Lattice Mico32 relocations.
6810 
6811 ENUM
6812   BFD_RELOC_MACH_O_SECTDIFF
6813 ENUMDOC
6814   Difference between two section addreses.  Must be followed by a
6815   BFD_RELOC_MACH_O_PAIR.
6816 ENUM
6817   BFD_RELOC_MACH_O_LOCAL_SECTDIFF
6818 ENUMDOC
6819   Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
6820 ENUM
6821   BFD_RELOC_MACH_O_PAIR
6822 ENUMDOC
6823   Pair of relocation.  Contains the first symbol.
6824 ENUM
6825   BFD_RELOC_MACH_O_SUBTRACTOR32
6826 ENUMDOC
6827   Symbol will be substracted.  Must be followed by a BFD_RELOC_32.
6828 ENUM
6829   BFD_RELOC_MACH_O_SUBTRACTOR64
6830 ENUMDOC
6831   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
6832 
6833 ENUM
6834   BFD_RELOC_MACH_O_X86_64_BRANCH32
6835 ENUMX
6836   BFD_RELOC_MACH_O_X86_64_BRANCH8
6837 ENUMDOC
6838   PCREL relocations.  They are marked as branch to create PLT entry if
6839   required.
6840 ENUM
6841   BFD_RELOC_MACH_O_X86_64_GOT
6842 ENUMDOC
6843   Used when referencing a GOT entry.
6844 ENUM
6845   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
6846 ENUMDOC
6847   Used when loading a GOT entry with movq.  It is specially marked so that
6848   the linker could optimize the movq to a leaq if possible.
6849 ENUM
6850   BFD_RELOC_MACH_O_X86_64_PCREL32_1
6851 ENUMDOC
6852   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
6853 ENUM
6854   BFD_RELOC_MACH_O_X86_64_PCREL32_2
6855 ENUMDOC
6856   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
6857 ENUM
6858   BFD_RELOC_MACH_O_X86_64_PCREL32_4
6859 ENUMDOC
6860   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
6861 
6862 
6863 ENUM
6864   BFD_RELOC_MACH_O_ARM64_ADDEND
6865 ENUMDOC
6866   Addend for PAGE or PAGEOFF.
6867 ENUM
6868   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21
6869 ENUMDOC
6870   Relative offset to page of GOT slot.
6871 ENUM
6872   BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12
6873 ENUMDOC
6874   Relative offset within page of GOT slot.
6875 ENUM
6876   BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT
6877 ENUMDOC
6878   Address of a GOT entry.
6879 
6880 ENUM
6881   BFD_RELOC_MICROBLAZE_32_LO
6882 ENUMDOC
6883   This is a 32 bit reloc for the microblaze that stores the
6884   low 16 bits of a value
6885 ENUM
6886   BFD_RELOC_MICROBLAZE_32_LO_PCREL
6887 ENUMDOC
6888   This is a 32 bit pc-relative reloc for the microblaze that
6889   stores the low 16 bits of a value
6890 ENUM
6891   BFD_RELOC_MICROBLAZE_32_ROSDA
6892 ENUMDOC
6893   This is a 32 bit reloc for the microblaze that stores a
6894   value relative to the read-only small data area anchor
6895 ENUM
6896   BFD_RELOC_MICROBLAZE_32_RWSDA
6897 ENUMDOC
6898   This is a 32 bit reloc for the microblaze that stores a
6899   value relative to the read-write small data area anchor
6900 ENUM
6901   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
6902 ENUMDOC
6903   This is a 32 bit reloc for the microblaze to handle
6904   expressions of the form "Symbol Op Symbol"
6905 ENUM
6906   BFD_RELOC_MICROBLAZE_64_NONE
6907 ENUMDOC
6908   This is a 64 bit reloc that stores the 32 bit pc relative
6909   value in two words (with an imm instruction).  No relocation is
6910   done here - only used for relaxing
6911 ENUM
6912   BFD_RELOC_MICROBLAZE_64_GOTPC
6913 ENUMDOC
6914   This is a 64 bit reloc that stores the 32 bit pc relative
6915   value in two words (with an imm instruction).  The relocation is
6916   PC-relative GOT offset
6917 ENUM
6918   BFD_RELOC_MICROBLAZE_64_GOT
6919 ENUMDOC
6920   This is a 64 bit reloc that stores the 32 bit pc relative
6921   value in two words (with an imm instruction).  The relocation is
6922   GOT offset
6923 ENUM
6924   BFD_RELOC_MICROBLAZE_64_PLT
6925 ENUMDOC
6926   This is a 64 bit reloc that stores the 32 bit pc relative
6927   value in two words (with an imm instruction).  The relocation is
6928   PC-relative offset into PLT
6929 ENUM
6930   BFD_RELOC_MICROBLAZE_64_GOTOFF
6931 ENUMDOC
6932   This is a 64 bit reloc that stores the 32 bit GOT relative
6933   value in two words (with an imm instruction).  The relocation is
6934   relative offset from _GLOBAL_OFFSET_TABLE_
6935 ENUM
6936   BFD_RELOC_MICROBLAZE_32_GOTOFF
6937 ENUMDOC
6938   This is a 32 bit reloc that stores the 32 bit GOT relative
6939   value in a word.  The relocation is relative offset from
6940   _GLOBAL_OFFSET_TABLE_
6941 ENUM
6942   BFD_RELOC_MICROBLAZE_COPY
6943 ENUMDOC
6944   This is used to tell the dynamic linker to copy the value out of
6945   the dynamic object into the runtime process image.
6946 ENUM
6947   BFD_RELOC_MICROBLAZE_64_TLS
6948 ENUMDOC
6949   Unused Reloc
6950 ENUM
6951   BFD_RELOC_MICROBLAZE_64_TLSGD
6952 ENUMDOC
6953   This is a 64 bit reloc that stores the 32 bit GOT relative value
6954   of the GOT TLS GD info entry in two words (with an imm instruction). The
6955   relocation is GOT offset.
6956 ENUM
6957   BFD_RELOC_MICROBLAZE_64_TLSLD
6958 ENUMDOC
6959   This is a 64 bit reloc that stores the 32 bit GOT relative value
6960   of the GOT TLS LD info entry in two words (with an imm instruction). The
6961   relocation is GOT offset.
6962 ENUM
6963   BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
6964 ENUMDOC
6965   This is a 32 bit reloc that stores the Module ID to GOT(n).
6966 ENUM
6967   BFD_RELOC_MICROBLAZE_32_TLSDTPREL
6968 ENUMDOC
6969   This is a 32 bit reloc that stores TLS offset to GOT(n+1).
6970 ENUM
6971   BFD_RELOC_MICROBLAZE_64_TLSDTPREL
6972 ENUMDOC
6973   This is a 32 bit reloc for storing TLS offset to two words (uses imm
6974   instruction)
6975 ENUM
6976   BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
6977 ENUMDOC
6978   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6979   to two words (uses imm instruction).
6980 ENUM
6981   BFD_RELOC_MICROBLAZE_64_TLSTPREL
6982 ENUMDOC
6983   This is a 64 bit reloc that stores 32-bit thread pointer relative offset
6984   to two words (uses imm instruction).
6985 
6986 ENUM
6987   BFD_RELOC_AARCH64_RELOC_START
6988 ENUMDOC
6989   AArch64 pseudo relocation code to mark the start of the AArch64
6990   relocation enumerators.  N.B. the order of the enumerators is
6991   important as several tables in the AArch64 bfd backend are indexed
6992   by these enumerators; make sure they are all synced.
6993 ENUM
6994   BFD_RELOC_AARCH64_NULL
6995 ENUMDOC
6996   Deprecated AArch64 null relocation code.
6997 ENUM
6998   BFD_RELOC_AARCH64_NONE
6999 ENUMDOC
7000   AArch64 null relocation code.
7001 ENUM
7002   BFD_RELOC_AARCH64_64
7003 ENUMX
7004   BFD_RELOC_AARCH64_32
7005 ENUMX
7006   BFD_RELOC_AARCH64_16
7007 ENUMDOC
7008   Basic absolute relocations of N bits.  These are equivalent to
7009 BFD_RELOC_N and they were added to assist the indexing of the howto
7010 table.
7011 ENUM
7012   BFD_RELOC_AARCH64_64_PCREL
7013 ENUMX
7014   BFD_RELOC_AARCH64_32_PCREL
7015 ENUMX
7016   BFD_RELOC_AARCH64_16_PCREL
7017 ENUMDOC
7018   PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL
7019 and they were added to assist the indexing of the howto table.
7020 ENUM
7021   BFD_RELOC_AARCH64_MOVW_G0
7022 ENUMDOC
7023   AArch64 MOV[NZK] instruction with most significant bits 0 to 15
7024   of an unsigned address/value.
7025 ENUM
7026   BFD_RELOC_AARCH64_MOVW_G0_NC
7027 ENUMDOC
7028   AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
7029   an address/value.  No overflow checking.
7030 ENUM
7031   BFD_RELOC_AARCH64_MOVW_G1
7032 ENUMDOC
7033   AArch64 MOV[NZK] instruction with most significant bits 16 to 31
7034   of an unsigned address/value.
7035 ENUM
7036   BFD_RELOC_AARCH64_MOVW_G1_NC
7037 ENUMDOC
7038   AArch64 MOV[NZK] instruction with less significant bits 16 to 31
7039   of an address/value.  No overflow checking.
7040 ENUM
7041   BFD_RELOC_AARCH64_MOVW_G2
7042 ENUMDOC
7043   AArch64 MOV[NZK] instruction with most significant bits 32 to 47
7044   of an unsigned address/value.
7045 ENUM
7046   BFD_RELOC_AARCH64_MOVW_G2_NC
7047 ENUMDOC
7048   AArch64 MOV[NZK] instruction with less significant bits 32 to 47
7049   of an address/value.  No overflow checking.
7050 ENUM
7051   BFD_RELOC_AARCH64_MOVW_G3
7052 ENUMDOC
7053   AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
7054   of a signed or unsigned address/value.
7055 ENUM
7056   BFD_RELOC_AARCH64_MOVW_G0_S
7057 ENUMDOC
7058   AArch64 MOV[NZ] instruction with most significant bits 0 to 15
7059   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
7060   value's sign.
7061 ENUM
7062   BFD_RELOC_AARCH64_MOVW_G1_S
7063 ENUMDOC
7064   AArch64 MOV[NZ] instruction with most significant bits 16 to 31
7065   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
7066   value's sign.
7067 ENUM
7068   BFD_RELOC_AARCH64_MOVW_G2_S
7069 ENUMDOC
7070   AArch64 MOV[NZ] instruction with most significant bits 32 to 47
7071   of a signed value.  Changes instruction to MOVZ or MOVN depending on the
7072   value's sign.
7073 ENUM
7074   BFD_RELOC_AARCH64_LD_LO19_PCREL
7075 ENUMDOC
7076   AArch64 Load Literal instruction, holding a 19 bit pc-relative word
7077   offset.  The lowest two bits must be zero and are not stored in the
7078   instruction, giving a 21 bit signed byte offset.
7079 ENUM
7080   BFD_RELOC_AARCH64_ADR_LO21_PCREL
7081 ENUMDOC
7082   AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
7083 ENUM
7084   BFD_RELOC_AARCH64_ADR_HI21_PCREL
7085 ENUMDOC
7086   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
7087   offset, giving a 4KB aligned page base address.
7088 ENUM
7089   BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
7090 ENUMDOC
7091   AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
7092   offset, giving a 4KB aligned page base address, but with no overflow
7093   checking.
7094 ENUM
7095   BFD_RELOC_AARCH64_ADD_LO12
7096 ENUMDOC
7097   AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
7098   Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7099 ENUM
7100   BFD_RELOC_AARCH64_LDST8_LO12
7101 ENUMDOC
7102   AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
7103   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7104 ENUM
7105   BFD_RELOC_AARCH64_TSTBR14
7106 ENUMDOC
7107   AArch64 14 bit pc-relative test bit and branch.
7108   The lowest two bits must be zero and are not stored in the instruction,
7109   giving a 16 bit signed byte offset.
7110 ENUM
7111   BFD_RELOC_AARCH64_BRANCH19
7112 ENUMDOC
7113   AArch64 19 bit pc-relative conditional branch and compare & branch.
7114   The lowest two bits must be zero and are not stored in the instruction,
7115   giving a 21 bit signed byte offset.
7116 ENUM
7117   BFD_RELOC_AARCH64_JUMP26
7118 ENUMDOC
7119   AArch64 26 bit pc-relative unconditional branch.
7120   The lowest two bits must be zero and are not stored in the instruction,
7121   giving a 28 bit signed byte offset.
7122 ENUM
7123   BFD_RELOC_AARCH64_CALL26
7124 ENUMDOC
7125   AArch64 26 bit pc-relative unconditional branch and link.
7126   The lowest two bits must be zero and are not stored in the instruction,
7127   giving a 28 bit signed byte offset.
7128 ENUM
7129   BFD_RELOC_AARCH64_LDST16_LO12
7130 ENUMDOC
7131   AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
7132   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7133 ENUM
7134   BFD_RELOC_AARCH64_LDST32_LO12
7135 ENUMDOC
7136   AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
7137   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7138 ENUM
7139   BFD_RELOC_AARCH64_LDST64_LO12
7140 ENUMDOC
7141   AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
7142   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7143 ENUM
7144   BFD_RELOC_AARCH64_LDST128_LO12
7145 ENUMDOC
7146   AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
7147   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7148 ENUM
7149   BFD_RELOC_AARCH64_GOT_LD_PREL19
7150 ENUMDOC
7151   AArch64 Load Literal instruction, holding a 19 bit PC relative word
7152   offset of the global offset table entry for a symbol.  The lowest two
7153   bits must be zero and are not stored in the instruction, giving a 21
7154   bit signed byte offset.  This relocation type requires signed overflow
7155   checking.
7156 ENUM
7157   BFD_RELOC_AARCH64_ADR_GOT_PAGE
7158 ENUMDOC
7159   Get to the page base of the global offset table entry for a symbol as
7160   part of an ADRP instruction using a 21 bit PC relative value.Used in
7161   conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
7162 ENUM
7163   BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
7164 ENUMDOC
7165   Unsigned 12 bit byte offset for 64 bit load/store from the page of
7166   the GOT entry for this symbol.  Used in conjunction with
7167   BFD_RELOC_AARCH64_ADR_GOT_PAGE.  Valid in LP64 ABI only.
7168 ENUM
7169   BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
7170 ENUMDOC
7171   Unsigned 12 bit byte offset for 32 bit load/store from the page of
7172   the GOT entry for this symbol.  Used in conjunction with
7173   BFD_RELOC_AARCH64_ADR_GOT_PAGE.  Valid in ILP32 ABI only.
7174  ENUM
7175   BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC
7176 ENUMDOC
7177   Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry
7178   for this symbol.  Valid in LP64 ABI only.
7179 ENUM
7180   BFD_RELOC_AARCH64_MOVW_GOTOFF_G1
7181 ENUMDOC
7182   Unsigned 16 bit byte higher offset for 64 bit load/store from the GOT entry
7183   for this symbol.  Valid in LP64 ABI only.
7184 ENUM
7185   BFD_RELOC_AARCH64_LD64_GOTOFF_LO15
7186 ENUMDOC
7187   Unsigned 15 bit byte offset for 64 bit load/store from the page of
7188   the GOT entry for this symbol.  Valid in LP64 ABI only.
7189 ENUM
7190   BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14
7191 ENUMDOC
7192   Scaled 14 bit byte offset to the page base of the global offset table.
7193 ENUM
7194   BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15
7195 ENUMDOC
7196   Scaled 15 bit byte offset to the page base of the global offset table.
7197 ENUM
7198   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
7199 ENUMDOC
7200   Get to the page base of the global offset table entry for a symbols
7201   tls_index structure as part of an adrp instruction using a 21 bit PC
7202   relative value.  Used in conjunction with
7203   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
7204 ENUM
7205   BFD_RELOC_AARCH64_TLSGD_ADR_PREL21
7206 ENUMDOC
7207   AArch64 TLS General Dynamic
7208 ENUM
7209   BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
7210 ENUMDOC
7211   Unsigned 12 bit byte offset to global offset table entry for a symbols
7212   tls_index structure.  Used in conjunction with
7213   BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
7214 ENUM
7215   BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC
7216 ENUMDOC
7217   AArch64 TLS General Dynamic relocation.
7218 ENUM
7219   BFD_RELOC_AARCH64_TLSGD_MOVW_G1
7220 ENUMDOC
7221   AArch64 TLS General Dynamic relocation.
7222 ENUM
7223   BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
7224 ENUMDOC
7225   AArch64 TLS INITIAL EXEC relocation.
7226 ENUM
7227   BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
7228 ENUMDOC
7229   AArch64 TLS INITIAL EXEC relocation.
7230 ENUM
7231   BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
7232 ENUMDOC
7233   AArch64 TLS INITIAL EXEC relocation.
7234 ENUM
7235   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
7236 ENUMDOC
7237   AArch64 TLS INITIAL EXEC relocation.
7238 ENUM
7239   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
7240 ENUMDOC
7241   AArch64 TLS INITIAL EXEC relocation.
7242 ENUM
7243   BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
7244 ENUMDOC
7245   AArch64 TLS INITIAL EXEC relocation.
7246 ENUM
7247   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12
7248 ENUMDOC
7249   bit[23:12] of byte offset to module TLS base address.
7250 ENUM
7251   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12
7252 ENUMDOC
7253   Unsigned 12 bit byte offset to module TLS base address.
7254 ENUM
7255   BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC
7256 ENUMDOC
7257   No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
7258 ENUM
7259   BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC
7260 ENUMDOC
7261   Unsigned 12 bit byte offset to global offset table entry for a symbols
7262   tls_index structure.  Used in conjunction with
7263   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
7264 ENUM
7265   BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21
7266 ENUMDOC
7267   GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP
7268   instruction.
7269 ENUM
7270   BFD_RELOC_AARCH64_TLSLD_ADR_PREL21
7271 ENUMDOC
7272   GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.
7273 ENUM
7274   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12
7275 ENUMDOC
7276   bit[11:1] of byte offset to module TLS base address, encoded in ldst
7277   instructions.
7278 ENUM
7279   BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC
7280 ENUMDOC
7281   Similar as BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no overflow check.
7282 ENUM
7283   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12
7284 ENUMDOC
7285   bit[11:2] of byte offset to module TLS base address, encoded in ldst
7286   instructions.
7287 ENUM
7288   BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC
7289 ENUMDOC
7290   Similar as BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no overflow check.
7291 ENUM
7292   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12
7293 ENUMDOC
7294   bit[11:3] of byte offset to module TLS base address, encoded in ldst
7295   instructions.
7296 ENUM
7297   BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC
7298 ENUMDOC
7299   Similar as BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no overflow check.
7300 ENUM
7301   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12
7302 ENUMDOC
7303   bit[11:0] of byte offset to module TLS base address, encoded in ldst
7304   instructions.
7305 ENUM
7306   BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC
7307 ENUMDOC
7308   Similar as BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no overflow check.
7309 ENUM
7310   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7311 ENUMDOC
7312   bit[15:0] of byte offset to module TLS base address.
7313 ENUM
7314   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC
7315 ENUMDOC
7316   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0
7317 ENUM
7318   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7319 ENUMDOC
7320   bit[31:16] of byte offset to module TLS base address.
7321 ENUM
7322   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC
7323 ENUMDOC
7324   No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1
7325 ENUM
7326   BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2
7327 ENUMDOC
7328   bit[47:32] of byte offset to module TLS base address.
7329 ENUM
7330   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
7331 ENUMDOC
7332   AArch64 TLS LOCAL EXEC relocation.
7333 ENUM
7334   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
7335 ENUMDOC
7336   AArch64 TLS LOCAL EXEC relocation.
7337 ENUM
7338   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
7339 ENUMDOC
7340   AArch64 TLS LOCAL EXEC relocation.
7341 ENUM
7342   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
7343 ENUMDOC
7344   AArch64 TLS LOCAL EXEC relocation.
7345 ENUM
7346   BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
7347 ENUMDOC
7348   AArch64 TLS LOCAL EXEC relocation.
7349 ENUM
7350   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
7351 ENUMDOC
7352   AArch64 TLS LOCAL EXEC relocation.
7353 ENUM
7354   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
7355 ENUMDOC
7356   AArch64 TLS LOCAL EXEC relocation.
7357 ENUM
7358   BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
7359 ENUMDOC
7360   AArch64 TLS LOCAL EXEC relocation.
7361 ENUM
7362   BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
7363 ENUMDOC
7364   AArch64 TLS DESC relocation.
7365 ENUM
7366   BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
7367 ENUMDOC
7368   AArch64 TLS DESC relocation.
7369 ENUM
7370   BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
7371 ENUMDOC
7372   AArch64 TLS DESC relocation.
7373 ENUM
7374   BFD_RELOC_AARCH64_TLSDESC_LD64_LO12
7375 ENUMDOC
7376   AArch64 TLS DESC relocation.
7377 ENUM
7378   BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
7379 ENUMDOC
7380   AArch64 TLS DESC relocation.
7381 ENUM
7382   BFD_RELOC_AARCH64_TLSDESC_ADD_LO12
7383 ENUMDOC
7384   AArch64 TLS DESC relocation.
7385 ENUM
7386   BFD_RELOC_AARCH64_TLSDESC_OFF_G1
7387 ENUMDOC
7388   AArch64 TLS DESC relocation.
7389 ENUM
7390   BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
7391 ENUMDOC
7392   AArch64 TLS DESC relocation.
7393 ENUM
7394   BFD_RELOC_AARCH64_TLSDESC_LDR
7395 ENUMDOC
7396   AArch64 TLS DESC relocation.
7397 ENUM
7398   BFD_RELOC_AARCH64_TLSDESC_ADD
7399 ENUMDOC
7400   AArch64 TLS DESC relocation.
7401 ENUM
7402   BFD_RELOC_AARCH64_TLSDESC_CALL
7403 ENUMDOC
7404   AArch64 TLS DESC relocation.
7405 ENUM
7406   BFD_RELOC_AARCH64_COPY
7407 ENUMDOC
7408   AArch64 TLS relocation.
7409 ENUM
7410   BFD_RELOC_AARCH64_GLOB_DAT
7411 ENUMDOC
7412   AArch64 TLS relocation.
7413 ENUM
7414   BFD_RELOC_AARCH64_JUMP_SLOT
7415 ENUMDOC
7416   AArch64 TLS relocation.
7417 ENUM
7418   BFD_RELOC_AARCH64_RELATIVE
7419 ENUMDOC
7420   AArch64 TLS relocation.
7421 ENUM
7422   BFD_RELOC_AARCH64_TLS_DTPMOD
7423 ENUMDOC
7424   AArch64 TLS relocation.
7425 ENUM
7426   BFD_RELOC_AARCH64_TLS_DTPREL
7427 ENUMDOC
7428   AArch64 TLS relocation.
7429 ENUM
7430   BFD_RELOC_AARCH64_TLS_TPREL
7431 ENUMDOC
7432   AArch64 TLS relocation.
7433 ENUM
7434   BFD_RELOC_AARCH64_TLSDESC
7435 ENUMDOC
7436   AArch64 TLS relocation.
7437 ENUM
7438   BFD_RELOC_AARCH64_IRELATIVE
7439 ENUMDOC
7440   AArch64 support for STT_GNU_IFUNC.
7441 ENUM
7442   BFD_RELOC_AARCH64_RELOC_END
7443 ENUMDOC
7444   AArch64 pseudo relocation code to mark the end of the AArch64
7445   relocation enumerators that have direct mapping to ELF reloc codes.
7446   There are a few more enumerators after this one; those are mainly
7447   used by the AArch64 assembler for the internal fixup or to select
7448   one of the above enumerators.
7449 ENUM
7450   BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
7451 ENUMDOC
7452   AArch64 pseudo relocation code to be used internally by the AArch64
7453   assembler and not (currently) written to any object files.
7454 ENUM
7455   BFD_RELOC_AARCH64_LDST_LO12
7456 ENUMDOC
7457   AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
7458   address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
7459 ENUM
7460   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12
7461 ENUMDOC
7462   AArch64 pseudo relocation code for TLS local dynamic mode.  It's to be
7463   used internally by the AArch64 assembler and not (currently) written to
7464   any object files.
7465 ENUM
7466   BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC
7467 ENUMDOC
7468   Similar as BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow check.
7469 ENUM
7470   BFD_RELOC_AARCH64_LD_GOT_LO12_NC
7471 ENUMDOC
7472   AArch64 pseudo relocation code to be used internally by the AArch64
7473   assembler and not (currently) written to any object files.
7474 ENUM
7475   BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
7476 ENUMDOC
7477   AArch64 pseudo relocation code to be used internally by the AArch64
7478   assembler and not (currently) written to any object files.
7479 ENUM
7480   BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
7481 ENUMDOC
7482   AArch64 pseudo relocation code to be used internally by the AArch64
7483   assembler and not (currently) written to any object files.
7484 ENUM
7485   BFD_RELOC_TILEPRO_COPY
7486 ENUMX
7487   BFD_RELOC_TILEPRO_GLOB_DAT
7488 ENUMX
7489   BFD_RELOC_TILEPRO_JMP_SLOT
7490 ENUMX
7491   BFD_RELOC_TILEPRO_RELATIVE
7492 ENUMX
7493   BFD_RELOC_TILEPRO_BROFF_X1
7494 ENUMX
7495   BFD_RELOC_TILEPRO_JOFFLONG_X1
7496 ENUMX
7497   BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
7498 ENUMX
7499   BFD_RELOC_TILEPRO_IMM8_X0
7500 ENUMX
7501   BFD_RELOC_TILEPRO_IMM8_Y0
7502 ENUMX
7503   BFD_RELOC_TILEPRO_IMM8_X1
7504 ENUMX
7505   BFD_RELOC_TILEPRO_IMM8_Y1
7506 ENUMX
7507   BFD_RELOC_TILEPRO_DEST_IMM8_X1
7508 ENUMX
7509   BFD_RELOC_TILEPRO_MT_IMM15_X1
7510 ENUMX
7511   BFD_RELOC_TILEPRO_MF_IMM15_X1
7512 ENUMX
7513   BFD_RELOC_TILEPRO_IMM16_X0
7514 ENUMX
7515   BFD_RELOC_TILEPRO_IMM16_X1
7516 ENUMX
7517   BFD_RELOC_TILEPRO_IMM16_X0_LO
7518 ENUMX
7519   BFD_RELOC_TILEPRO_IMM16_X1_LO
7520 ENUMX
7521   BFD_RELOC_TILEPRO_IMM16_X0_HI
7522 ENUMX
7523   BFD_RELOC_TILEPRO_IMM16_X1_HI
7524 ENUMX
7525   BFD_RELOC_TILEPRO_IMM16_X0_HA
7526 ENUMX
7527   BFD_RELOC_TILEPRO_IMM16_X1_HA
7528 ENUMX
7529   BFD_RELOC_TILEPRO_IMM16_X0_PCREL
7530 ENUMX
7531   BFD_RELOC_TILEPRO_IMM16_X1_PCREL
7532 ENUMX
7533   BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
7534 ENUMX
7535   BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
7536 ENUMX
7537   BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
7538 ENUMX
7539   BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
7540 ENUMX
7541   BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
7542 ENUMX
7543   BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
7544 ENUMX
7545   BFD_RELOC_TILEPRO_IMM16_X0_GOT
7546 ENUMX
7547   BFD_RELOC_TILEPRO_IMM16_X1_GOT
7548 ENUMX
7549   BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
7550 ENUMX
7551   BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
7552 ENUMX
7553   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
7554 ENUMX
7555   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
7556 ENUMX
7557   BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
7558 ENUMX
7559   BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
7560 ENUMX
7561   BFD_RELOC_TILEPRO_MMSTART_X0
7562 ENUMX
7563   BFD_RELOC_TILEPRO_MMEND_X0
7564 ENUMX
7565   BFD_RELOC_TILEPRO_MMSTART_X1
7566 ENUMX
7567   BFD_RELOC_TILEPRO_MMEND_X1
7568 ENUMX
7569   BFD_RELOC_TILEPRO_SHAMT_X0
7570 ENUMX
7571   BFD_RELOC_TILEPRO_SHAMT_X1
7572 ENUMX
7573   BFD_RELOC_TILEPRO_SHAMT_Y0
7574 ENUMX
7575   BFD_RELOC_TILEPRO_SHAMT_Y1
7576 ENUMX
7577   BFD_RELOC_TILEPRO_TLS_GD_CALL
7578 ENUMX
7579   BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
7580 ENUMX
7581   BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
7582 ENUMX
7583   BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
7584 ENUMX
7585   BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
7586 ENUMX
7587   BFD_RELOC_TILEPRO_TLS_IE_LOAD
7588 ENUMX
7589   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
7590 ENUMX
7591   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
7592 ENUMX
7593   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
7594 ENUMX
7595   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
7596 ENUMX
7597   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
7598 ENUMX
7599   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
7600 ENUMX
7601   BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
7602 ENUMX
7603   BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
7604 ENUMX
7605   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
7606 ENUMX
7607   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
7608 ENUMX
7609   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
7610 ENUMX
7611   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
7612 ENUMX
7613   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
7614 ENUMX
7615   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
7616 ENUMX
7617   BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
7618 ENUMX
7619   BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
7620 ENUMX
7621   BFD_RELOC_TILEPRO_TLS_DTPMOD32
7622 ENUMX
7623   BFD_RELOC_TILEPRO_TLS_DTPOFF32
7624 ENUMX
7625   BFD_RELOC_TILEPRO_TLS_TPOFF32
7626 ENUMX
7627   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
7628 ENUMX
7629   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
7630 ENUMX
7631   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
7632 ENUMX
7633   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
7634 ENUMX
7635   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
7636 ENUMX
7637   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
7638 ENUMX
7639   BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
7640 ENUMX
7641   BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
7642 ENUMDOC
7643   Tilera TILEPro Relocations.
7644 ENUM
7645   BFD_RELOC_TILEGX_HW0
7646 ENUMX
7647   BFD_RELOC_TILEGX_HW1
7648 ENUMX
7649   BFD_RELOC_TILEGX_HW2
7650 ENUMX
7651   BFD_RELOC_TILEGX_HW3
7652 ENUMX
7653   BFD_RELOC_TILEGX_HW0_LAST
7654 ENUMX
7655   BFD_RELOC_TILEGX_HW1_LAST
7656 ENUMX
7657   BFD_RELOC_TILEGX_HW2_LAST
7658 ENUMX
7659   BFD_RELOC_TILEGX_COPY
7660 ENUMX
7661   BFD_RELOC_TILEGX_GLOB_DAT
7662 ENUMX
7663   BFD_RELOC_TILEGX_JMP_SLOT
7664 ENUMX
7665   BFD_RELOC_TILEGX_RELATIVE
7666 ENUMX
7667   BFD_RELOC_TILEGX_BROFF_X1
7668 ENUMX
7669   BFD_RELOC_TILEGX_JUMPOFF_X1
7670 ENUMX
7671   BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
7672 ENUMX
7673   BFD_RELOC_TILEGX_IMM8_X0
7674 ENUMX
7675   BFD_RELOC_TILEGX_IMM8_Y0
7676 ENUMX
7677   BFD_RELOC_TILEGX_IMM8_X1
7678 ENUMX
7679   BFD_RELOC_TILEGX_IMM8_Y1
7680 ENUMX
7681   BFD_RELOC_TILEGX_DEST_IMM8_X1
7682 ENUMX
7683   BFD_RELOC_TILEGX_MT_IMM14_X1
7684 ENUMX
7685   BFD_RELOC_TILEGX_MF_IMM14_X1
7686 ENUMX
7687   BFD_RELOC_TILEGX_MMSTART_X0
7688 ENUMX
7689   BFD_RELOC_TILEGX_MMEND_X0
7690 ENUMX
7691   BFD_RELOC_TILEGX_SHAMT_X0
7692 ENUMX
7693   BFD_RELOC_TILEGX_SHAMT_X1
7694 ENUMX
7695   BFD_RELOC_TILEGX_SHAMT_Y0
7696 ENUMX
7697   BFD_RELOC_TILEGX_SHAMT_Y1
7698 ENUMX
7699   BFD_RELOC_TILEGX_IMM16_X0_HW0
7700 ENUMX
7701   BFD_RELOC_TILEGX_IMM16_X1_HW0
7702 ENUMX
7703   BFD_RELOC_TILEGX_IMM16_X0_HW1
7704 ENUMX
7705   BFD_RELOC_TILEGX_IMM16_X1_HW1
7706 ENUMX
7707   BFD_RELOC_TILEGX_IMM16_X0_HW2
7708 ENUMX
7709   BFD_RELOC_TILEGX_IMM16_X1_HW2
7710 ENUMX
7711   BFD_RELOC_TILEGX_IMM16_X0_HW3
7712 ENUMX
7713   BFD_RELOC_TILEGX_IMM16_X1_HW3
7714 ENUMX
7715   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
7716 ENUMX
7717   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
7718 ENUMX
7719   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
7720 ENUMX
7721   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
7722 ENUMX
7723   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
7724 ENUMX
7725   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
7726 ENUMX
7727   BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
7728 ENUMX
7729   BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
7730 ENUMX
7731   BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
7732 ENUMX
7733   BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
7734 ENUMX
7735   BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
7736 ENUMX
7737   BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
7738 ENUMX
7739   BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
7740 ENUMX
7741   BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
7742 ENUMX
7743   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
7744 ENUMX
7745   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
7746 ENUMX
7747   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
7748 ENUMX
7749   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
7750 ENUMX
7751   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
7752 ENUMX
7753   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
7754 ENUMX
7755   BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
7756 ENUMX
7757   BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
7758 ENUMX
7759   BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
7760 ENUMX
7761   BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
7762 ENUMX
7763   BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
7764 ENUMX
7765   BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
7766 ENUMX
7767   BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
7768 ENUMX
7769   BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
7770 ENUMX
7771   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
7772 ENUMX
7773   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
7774 ENUMX
7775   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
7776 ENUMX
7777   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
7778 ENUMX
7779   BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
7780 ENUMX
7781   BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
7782 ENUMX
7783   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
7784 ENUMX
7785   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
7786 ENUMX
7787   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
7788 ENUMX
7789   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
7790 ENUMX
7791   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
7792 ENUMX
7793   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
7794 ENUMX
7795   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
7796 ENUMX
7797   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
7798 ENUMX
7799   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
7800 ENUMX
7801   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
7802 ENUMX
7803   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
7804 ENUMX
7805   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
7806 ENUMX
7807   BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
7808 ENUMX
7809   BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
7810 ENUMX
7811   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
7812 ENUMX
7813   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
7814 ENUMX
7815   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
7816 ENUMX
7817   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
7818 ENUMX
7819   BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
7820 ENUMX
7821   BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
7822 ENUMX
7823   BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
7824 ENUMX
7825   BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
7826 ENUMX
7827   BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
7828 ENUMX
7829   BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
7830 ENUMX
7831   BFD_RELOC_TILEGX_TLS_DTPMOD64
7832 ENUMX
7833   BFD_RELOC_TILEGX_TLS_DTPOFF64
7834 ENUMX
7835   BFD_RELOC_TILEGX_TLS_TPOFF64
7836 ENUMX
7837   BFD_RELOC_TILEGX_TLS_DTPMOD32
7838 ENUMX
7839   BFD_RELOC_TILEGX_TLS_DTPOFF32
7840 ENUMX
7841   BFD_RELOC_TILEGX_TLS_TPOFF32
7842 ENUMX
7843   BFD_RELOC_TILEGX_TLS_GD_CALL
7844 ENUMX
7845   BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
7846 ENUMX
7847   BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
7848 ENUMX
7849   BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
7850 ENUMX
7851   BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
7852 ENUMX
7853   BFD_RELOC_TILEGX_TLS_IE_LOAD
7854 ENUMX
7855   BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
7856 ENUMX
7857   BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
7858 ENUMX
7859   BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
7860 ENUMX
7861   BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
7862 ENUMDOC
7863   Tilera TILE-Gx Relocations.
7864 
7865 ENUM
7866   BFD_RELOC_EPIPHANY_SIMM8
7867 ENUMDOC
7868   Adapteva EPIPHANY - 8 bit signed pc-relative displacement
7869 ENUM
7870   BFD_RELOC_EPIPHANY_SIMM24
7871 ENUMDOC
7872   Adapteva EPIPHANY - 24 bit signed pc-relative displacement
7873 ENUM
7874   BFD_RELOC_EPIPHANY_HIGH
7875 ENUMDOC
7876   Adapteva EPIPHANY - 16 most-significant bits of absolute address
7877 ENUM
7878   BFD_RELOC_EPIPHANY_LOW
7879 ENUMDOC
7880   Adapteva EPIPHANY - 16 least-significant bits of absolute address
7881 ENUM
7882   BFD_RELOC_EPIPHANY_SIMM11
7883 ENUMDOC
7884   Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
7885 ENUM
7886   BFD_RELOC_EPIPHANY_IMM11
7887 ENUMDOC
7888   Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
7889 ENUM
7890   BFD_RELOC_EPIPHANY_IMM8
7891 ENUMDOC
7892   Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
7893 
7894 ENUM
7895   BFD_RELOC_VISIUM_HI16
7896 ENUMX
7897   BFD_RELOC_VISIUM_LO16
7898 ENUMX
7899   BFD_RELOC_VISIUM_IM16
7900 ENUMX
7901   BFD_RELOC_VISIUM_REL16
7902 ENUMX
7903   BFD_RELOC_VISIUM_HI16_PCREL
7904 ENUMX
7905   BFD_RELOC_VISIUM_LO16_PCREL
7906 ENUMX
7907   BFD_RELOC_VISIUM_IM16_PCREL
7908 ENUMDOC
7909   Visium Relocations.
7910 
7911 ENUM
7912   BFD_RELOC_WASM32_LEB128
7913 ENUMX
7914   BFD_RELOC_WASM32_LEB128_GOT
7915 ENUMX
7916   BFD_RELOC_WASM32_LEB128_GOT_CODE
7917 ENUMX
7918   BFD_RELOC_WASM32_LEB128_PLT
7919 ENUMX
7920   BFD_RELOC_WASM32_PLT_INDEX
7921 ENUMX
7922   BFD_RELOC_WASM32_ABS32_CODE
7923 ENUMX
7924   BFD_RELOC_WASM32_COPY
7925 ENUMX
7926   BFD_RELOC_WASM32_CODE_POINTER
7927 ENUMX
7928   BFD_RELOC_WASM32_INDEX
7929 ENUMX
7930   BFD_RELOC_WASM32_PLT_SIG
7931 ENUMDOC
7932   WebAssembly relocations.
7933 
7934 ENDSENUM
7935   BFD_RELOC_UNUSED
7936 CODE_FRAGMENT
7937 .
7938 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
7939 */
7940 
7941 /*
7942 FUNCTION
7943 	bfd_reloc_type_lookup
7944 	bfd_reloc_name_lookup
7945 
7946 SYNOPSIS
7947 	reloc_howto_type *bfd_reloc_type_lookup
7948 	  (bfd *abfd, bfd_reloc_code_real_type code);
7949 	reloc_howto_type *bfd_reloc_name_lookup
7950 	  (bfd *abfd, const char *reloc_name);
7951 
7952 DESCRIPTION
7953 	Return a pointer to a howto structure which, when
7954 	invoked, will perform the relocation @var{code} on data from the
7955 	architecture noted.
7956 
7957 */
7958 
7959 reloc_howto_type *
bfd_reloc_type_lookup(bfd * abfd,bfd_reloc_code_real_type code)7960 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7961 {
7962   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
7963 }
7964 
7965 reloc_howto_type *
bfd_reloc_name_lookup(bfd * abfd,const char * reloc_name)7966 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
7967 {
7968   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
7969 }
7970 
7971 static reloc_howto_type bfd_howto_32 =
7972 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
7973 
7974 /*
7975 INTERNAL_FUNCTION
7976 	bfd_default_reloc_type_lookup
7977 
7978 SYNOPSIS
7979 	reloc_howto_type *bfd_default_reloc_type_lookup
7980 	  (bfd *abfd, bfd_reloc_code_real_type  code);
7981 
7982 DESCRIPTION
7983 	Provides a default relocation lookup routine for any architecture.
7984 
7985 */
7986 
7987 reloc_howto_type *
bfd_default_reloc_type_lookup(bfd * abfd,bfd_reloc_code_real_type code)7988 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
7989 {
7990   switch (code)
7991     {
7992     case BFD_RELOC_CTOR:
7993       /* The type of reloc used in a ctor, which will be as wide as the
7994 	 address - so either a 64, 32, or 16 bitter.  */
7995       switch (bfd_arch_bits_per_address (abfd))
7996 	{
7997 	case 64:
7998 	  BFD_FAIL ();
7999 	  break;
8000 	case 32:
8001 	  return &bfd_howto_32;
8002 	case 16:
8003 	  BFD_FAIL ();
8004 	  break;
8005 	default:
8006 	  BFD_FAIL ();
8007 	}
8008       break;
8009     default:
8010       BFD_FAIL ();
8011     }
8012   return NULL;
8013 }
8014 
8015 /*
8016 FUNCTION
8017 	bfd_get_reloc_code_name
8018 
8019 SYNOPSIS
8020 	const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
8021 
8022 DESCRIPTION
8023 	Provides a printable name for the supplied relocation code.
8024 	Useful mainly for printing error messages.
8025 */
8026 
8027 const char *
bfd_get_reloc_code_name(bfd_reloc_code_real_type code)8028 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
8029 {
8030   if (code > BFD_RELOC_UNUSED)
8031     return 0;
8032   return bfd_reloc_code_real_names[code];
8033 }
8034 
8035 /*
8036 INTERNAL_FUNCTION
8037 	bfd_generic_relax_section
8038 
8039 SYNOPSIS
8040 	bfd_boolean bfd_generic_relax_section
8041 	  (bfd *abfd,
8042 	   asection *section,
8043 	   struct bfd_link_info *,
8044 	   bfd_boolean *);
8045 
8046 DESCRIPTION
8047 	Provides default handling for relaxing for back ends which
8048 	don't do relaxing.
8049 */
8050 
8051 bfd_boolean
bfd_generic_relax_section(bfd * abfd ATTRIBUTE_UNUSED,asection * section ATTRIBUTE_UNUSED,struct bfd_link_info * link_info ATTRIBUTE_UNUSED,bfd_boolean * again)8052 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
8053 			   asection *section ATTRIBUTE_UNUSED,
8054 			   struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
8055 			   bfd_boolean *again)
8056 {
8057   if (bfd_link_relocatable (link_info))
8058     (*link_info->callbacks->einfo)
8059       (_("%P%F: --relax and -r may not be used together\n"));
8060 
8061   *again = FALSE;
8062   return TRUE;
8063 }
8064 
8065 /*
8066 INTERNAL_FUNCTION
8067 	bfd_generic_gc_sections
8068 
8069 SYNOPSIS
8070 	bfd_boolean bfd_generic_gc_sections
8071 	  (bfd *, struct bfd_link_info *);
8072 
8073 DESCRIPTION
8074 	Provides default handling for relaxing for back ends which
8075 	don't do section gc -- i.e., does nothing.
8076 */
8077 
8078 bfd_boolean
bfd_generic_gc_sections(bfd * abfd ATTRIBUTE_UNUSED,struct bfd_link_info * info ATTRIBUTE_UNUSED)8079 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
8080 			 struct bfd_link_info *info ATTRIBUTE_UNUSED)
8081 {
8082   return TRUE;
8083 }
8084 
8085 /*
8086 INTERNAL_FUNCTION
8087 	bfd_generic_lookup_section_flags
8088 
8089 SYNOPSIS
8090 	bfd_boolean bfd_generic_lookup_section_flags
8091 	  (struct bfd_link_info *, struct flag_info *, asection *);
8092 
8093 DESCRIPTION
8094 	Provides default handling for section flags lookup
8095 	-- i.e., does nothing.
8096 	Returns FALSE if the section should be omitted, otherwise TRUE.
8097 */
8098 
8099 bfd_boolean
bfd_generic_lookup_section_flags(struct bfd_link_info * info ATTRIBUTE_UNUSED,struct flag_info * flaginfo,asection * section ATTRIBUTE_UNUSED)8100 bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
8101 				  struct flag_info *flaginfo,
8102 				  asection *section ATTRIBUTE_UNUSED)
8103 {
8104   if (flaginfo != NULL)
8105     {
8106       _bfd_error_handler (_("INPUT_SECTION_FLAGS are not supported.\n"));
8107       return FALSE;
8108     }
8109   return TRUE;
8110 }
8111 
8112 /*
8113 INTERNAL_FUNCTION
8114 	bfd_generic_merge_sections
8115 
8116 SYNOPSIS
8117 	bfd_boolean bfd_generic_merge_sections
8118 	  (bfd *, struct bfd_link_info *);
8119 
8120 DESCRIPTION
8121 	Provides default handling for SEC_MERGE section merging for back ends
8122 	which don't have SEC_MERGE support -- i.e., does nothing.
8123 */
8124 
8125 bfd_boolean
bfd_generic_merge_sections(bfd * abfd ATTRIBUTE_UNUSED,struct bfd_link_info * link_info ATTRIBUTE_UNUSED)8126 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
8127 			    struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
8128 {
8129   return TRUE;
8130 }
8131 
8132 /*
8133 INTERNAL_FUNCTION
8134 	bfd_generic_get_relocated_section_contents
8135 
8136 SYNOPSIS
8137 	bfd_byte *bfd_generic_get_relocated_section_contents
8138 	  (bfd *abfd,
8139 	   struct bfd_link_info *link_info,
8140 	   struct bfd_link_order *link_order,
8141 	   bfd_byte *data,
8142 	   bfd_boolean relocatable,
8143 	   asymbol **symbols);
8144 
8145 DESCRIPTION
8146 	Provides default handling of relocation effort for back ends
8147 	which can't be bothered to do it efficiently.
8148 
8149 */
8150 
8151 bfd_byte *
bfd_generic_get_relocated_section_contents(bfd * abfd,struct bfd_link_info * link_info,struct bfd_link_order * link_order,bfd_byte * data,bfd_boolean relocatable,asymbol ** symbols)8152 bfd_generic_get_relocated_section_contents (bfd *abfd,
8153 					    struct bfd_link_info *link_info,
8154 					    struct bfd_link_order *link_order,
8155 					    bfd_byte *data,
8156 					    bfd_boolean relocatable,
8157 					    asymbol **symbols)
8158 {
8159   bfd *input_bfd = link_order->u.indirect.section->owner;
8160   asection *input_section = link_order->u.indirect.section;
8161   long reloc_size;
8162   arelent **reloc_vector;
8163   long reloc_count;
8164 
8165   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
8166   if (reloc_size < 0)
8167     return NULL;
8168 
8169   /* Read in the section.  */
8170   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
8171     return NULL;
8172 
8173   if (data == NULL)
8174     return NULL;
8175 
8176   if (reloc_size == 0)
8177     return data;
8178 
8179   reloc_vector = (arelent **) bfd_malloc (reloc_size);
8180   if (reloc_vector == NULL)
8181     return NULL;
8182 
8183   reloc_count = bfd_canonicalize_reloc (input_bfd,
8184 					input_section,
8185 					reloc_vector,
8186 					symbols);
8187   if (reloc_count < 0)
8188     goto error_return;
8189 
8190   if (reloc_count > 0)
8191     {
8192       arelent **parent;
8193 
8194       for (parent = reloc_vector; *parent != NULL; parent++)
8195 	{
8196 	  char *error_message = NULL;
8197 	  asymbol *symbol;
8198 	  bfd_reloc_status_type r;
8199 
8200 	  symbol = *(*parent)->sym_ptr_ptr;
8201 	  /* PR ld/19628: A specially crafted input file
8202 	     can result in a NULL symbol pointer here.  */
8203 	  if (symbol == NULL)
8204 	    {
8205 	      link_info->callbacks->einfo
8206 		/* xgettext:c-format */
8207 		(_("%X%P: %B(%A): error: relocation for offset %V has no value\n"),
8208 		 abfd, input_section, (* parent)->address);
8209 	      goto error_return;
8210 	    }
8211 
8212 	  if (symbol->section && discarded_section (symbol->section))
8213 	    {
8214 	      bfd_byte *p;
8215 	      static reloc_howto_type none_howto
8216 		= HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
8217 			 "unused", FALSE, 0, 0, FALSE);
8218 
8219 	      p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
8220 	      _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
8221 				   p);
8222 	      (*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
8223 	      (*parent)->addend = 0;
8224 	      (*parent)->howto = &none_howto;
8225 	      r = bfd_reloc_ok;
8226 	    }
8227 	  else
8228 	    r = bfd_perform_relocation (input_bfd,
8229 					*parent,
8230 					data,
8231 					input_section,
8232 					relocatable ? abfd : NULL,
8233 					&error_message);
8234 
8235 	  if (relocatable)
8236 	    {
8237 	      asection *os = input_section->output_section;
8238 
8239 	      /* A partial link, so keep the relocs.  */
8240 	      os->orelocation[os->reloc_count] = *parent;
8241 	      os->reloc_count++;
8242 	    }
8243 
8244 	  if (r != bfd_reloc_ok)
8245 	    {
8246 	      switch (r)
8247 		{
8248 		case bfd_reloc_undefined:
8249 		  (*link_info->callbacks->undefined_symbol)
8250 		    (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8251 		     input_bfd, input_section, (*parent)->address, TRUE);
8252 		  break;
8253 		case bfd_reloc_dangerous:
8254 		  BFD_ASSERT (error_message != NULL);
8255 		  (*link_info->callbacks->reloc_dangerous)
8256 		    (link_info, error_message,
8257 		     input_bfd, input_section, (*parent)->address);
8258 		  break;
8259 		case bfd_reloc_overflow:
8260 		  (*link_info->callbacks->reloc_overflow)
8261 		    (link_info, NULL,
8262 		     bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
8263 		     (*parent)->howto->name, (*parent)->addend,
8264 		     input_bfd, input_section, (*parent)->address);
8265 		  break;
8266 		case bfd_reloc_outofrange:
8267 		  /* PR ld/13730:
8268 		     This error can result when processing some partially
8269 		     complete binaries.  Do not abort, but issue an error
8270 		     message instead.  */
8271 		  link_info->callbacks->einfo
8272 		    /* xgettext:c-format */
8273 		    (_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
8274 		     abfd, input_section, * parent);
8275 		  goto error_return;
8276 
8277 		case bfd_reloc_notsupported:
8278 		  /* PR ld/17512
8279 		     This error can result when processing a corrupt binary.
8280 		     Do not abort.  Issue an error message instead.  */
8281 		  link_info->callbacks->einfo
8282 		    /* xgettext:c-format */
8283 		    (_("%X%P: %B(%A): relocation \"%R\" is not supported\n"),
8284 		     abfd, input_section, * parent);
8285 		  goto error_return;
8286 
8287 		default:
8288 		  /* PR 17512; file: 90c2a92e.
8289 		     Report unexpected results, without aborting.  */
8290 		  link_info->callbacks->einfo
8291 		    /* xgettext:c-format */
8292 		    (_("%X%P: %B(%A): relocation \"%R\" returns an unrecognized value %x\n"),
8293 		     abfd, input_section, * parent, r);
8294 		  break;
8295 		}
8296 
8297 	    }
8298 	}
8299     }
8300 
8301   free (reloc_vector);
8302   return data;
8303 
8304 error_return:
8305   free (reloc_vector);
8306   return NULL;
8307 }
8308 
8309 /*
8310 INTERNAL_FUNCTION
8311 	_bfd_generic_set_reloc
8312 
8313 SYNOPSIS
8314 	void _bfd_generic_set_reloc
8315 	  (bfd *abfd,
8316 	   sec_ptr section,
8317 	   arelent **relptr,
8318 	   unsigned int count);
8319 
8320 DESCRIPTION
8321 	Installs a new set of internal relocations in SECTION.
8322 */
8323 
8324 void
_bfd_generic_set_reloc(bfd * abfd ATTRIBUTE_UNUSED,sec_ptr section,arelent ** relptr,unsigned int count)8325 _bfd_generic_set_reloc (bfd *abfd ATTRIBUTE_UNUSED,
8326 			sec_ptr section,
8327 			arelent **relptr,
8328 			unsigned int count)
8329 {
8330   section->orelocation = relptr;
8331   section->reloc_count = count;
8332 }
8333 
8334 /*
8335 INTERNAL_FUNCTION
8336 	_bfd_unrecognized_reloc
8337 
8338 SYNOPSIS
8339 	bfd_boolean _bfd_unrecognized_reloc
8340 	  (bfd * abfd,
8341 	   sec_ptr section,
8342 	   unsigned int r_type);
8343 
8344 DESCRIPTION
8345 	Reports an unrecognized reloc.
8346 	Written as a function in order to reduce code duplication.
8347 	Returns FALSE so that it can be called from a return statement.
8348 */
8349 
8350 bfd_boolean
_bfd_unrecognized_reloc(bfd * abfd,sec_ptr section,unsigned int r_type)8351 _bfd_unrecognized_reloc (bfd * abfd, sec_ptr section, unsigned int r_type)
8352 {
8353    /* xgettext:c-format */
8354   _bfd_error_handler (_("%B: unrecognized relocation (%#x) in section `%A'"),
8355 		      abfd, r_type, section);
8356 
8357   /* PR 21803: Suggest the most likely cause of this error.  */
8358   _bfd_error_handler (_("Is this version of the linker - %s - out of date ?"),
8359 		      BFD_VERSION_STRING);
8360 
8361   bfd_set_error (bfd_error_bad_value);
8362   return FALSE;
8363 }
8364