1# Greek translation of Mailman
2# ********* 2011 CTI/NTS www.cti.gr/nts
3# Avgoulea Maria <avgoulea@cti.gr>, 2005.
4# Kapralou Chrysa <kapralou@cti.gr>, 2005.
5# Ramos Elias <ramos@cti.gr>, 2007.
6# Giannopoulos Kostas <giannopk@cti.gr>, 2011
7# Limperis Antonis <limperis@cti.gr>, 2011
8msgid ""
9msgstr ""
10"Project-Id-Version: tuxpaint-2.1pre\n"
11"Report-Msgid-Bugs-To: \n"
12"POT-Creation-Date: Fri Jun 26 17:05:40 2020\n"
13"PO-Revision-Date: 2011-09-15 11:53+0800\n"
14"Last-Translator: Limperis Antonis <limperis@cti.gr>\n"
15"Language-Team: Greek <listmaster@sch.gr>\n"
16"Language: el\n"
17"MIME-Version: 1.0\n"
18"Content-Type: text/plain; charset=ISO-8859-7\n"
19"Content-Transfer-Encoding: 8bit\n"
20
21#: Mailman/Archiver/HyperArch.py:124
22msgid "size not available"
23msgstr "�� ������� ��� ����� ���������"
24
25#: Mailman/Archiver/HyperArch.py:130
26msgid " %(size)i bytes "
27msgstr " %(size)i bytes "
28
29#: Mailman/Archiver/HyperArch.py:276 Mailman/Archiver/pipermail.py:185
30#: Mailman/Archiver/pipermail.py:186
31msgid "No subject"
32msgstr "��� ������� ����"
33
34#: Mailman/Archiver/HyperArch.py:292 Mailman/Archiver/HyperArch.py:295
35#: Mailman/Archiver/HyperArch.py:426 Mailman/Archiver/HyperArch.py:484
36#: Mailman/Archiver/HyperArch.py:593 Mailman/Archiver/HyperArch.py:1067
37#: Mailman/Archiver/HyperArch.py:1196
38msgid " at "
39msgstr " ��� "
40
41#: Mailman/Archiver/HyperArch.py:513
42#, fuzzy
43msgid "Previous message (by thread):"
44msgstr "����������� ������:"
45
46#: Mailman/Archiver/HyperArch.py:535
47#, fuzzy
48msgid "Next message (by thread):"
49msgstr "������� ������:"
50
51#: Mailman/Archiver/HyperArch.py:708 Mailman/Archiver/HyperArch.py:744
52msgid "thread"
53msgstr "��������� ���������"
54
55#: Mailman/Archiver/HyperArch.py:709 Mailman/Archiver/HyperArch.py:745
56msgid "subject"
57msgstr "����"
58
59#: Mailman/Archiver/HyperArch.py:710 Mailman/Archiver/HyperArch.py:746
60msgid "author"
61msgstr "����������"
62
63#: Mailman/Archiver/HyperArch.py:711 Mailman/Archiver/HyperArch.py:747
64msgid "date"
65msgstr "����������"
66
67#: Mailman/Archiver/HyperArch.py:783
68msgid "<P>Currently, there are no archives. </P>"
69msgstr "<P>���� �� ������, ��� �������� �������� ������ ��� ���������. </P>"
70
71#: Mailman/Archiver/HyperArch.py:821
72msgid "Gzip'd Text%(sz)s"
73msgstr "����������� �������%(sz)s"
74
75#: Mailman/Archiver/HyperArch.py:826
76msgid "Text%(sz)s"
77msgstr "�������%(sz)s"
78
79#: Mailman/Archiver/HyperArch.py:916
80msgid "figuring article archives\n"
81msgstr "�������� ������ ��������� �������\n"
82
83#: Mailman/Archiver/HyperArch.py:926
84msgid "April"
85msgstr "��������"
86
87#: Mailman/Archiver/HyperArch.py:926
88msgid "February"
89msgstr "�����������"
90
91#: Mailman/Archiver/HyperArch.py:926
92msgid "January"
93msgstr "����������"
94
95#: Mailman/Archiver/HyperArch.py:926
96msgid "March"
97msgstr "�������"
98
99#: Mailman/Archiver/HyperArch.py:927
100msgid "August"
101msgstr "���������"
102
103#: Mailman/Archiver/HyperArch.py:927
104msgid "July"
105msgstr "�������"
106
107#: Mailman/Archiver/HyperArch.py:927
108msgid "June"
109msgstr "�������"
110
111#: Mailman/Archiver/HyperArch.py:927 Mailman/i18n.py:137
112msgid "May"
113msgstr "�����"
114
115#: Mailman/Archiver/HyperArch.py:928
116msgid "December"
117msgstr "����������"
118
119#: Mailman/Archiver/HyperArch.py:928
120msgid "November"
121msgstr "���������"
122
123#: Mailman/Archiver/HyperArch.py:928
124msgid "October"
125msgstr "���������"
126
127#: Mailman/Archiver/HyperArch.py:928
128msgid "September"
129msgstr "�����������"
130
131#: Mailman/Archiver/HyperArch.py:936
132msgid "First"
133msgstr "�����"
134
135#: Mailman/Archiver/HyperArch.py:936
136msgid "Fourth"
137msgstr "�������"
138
139#: Mailman/Archiver/HyperArch.py:936
140msgid "Second"
141msgstr "�������"
142
143#: Mailman/Archiver/HyperArch.py:936
144msgid "Third"
145msgstr "�����"
146
147#: Mailman/Archiver/HyperArch.py:938
148msgid "%(ord)s quarter %(year)i"
149msgstr "%(ord)s ������� %(year)i"
150
151#: Mailman/Archiver/HyperArch.py:945
152msgid "%(month)s %(year)i"
153msgstr "%(month)s %(year)i"
154
155#: Mailman/Archiver/HyperArch.py:950
156msgid "The Week Of Monday %(day)i %(month)s %(year)i"
157msgstr "�������� ��� �������� %(day)i %(month)s %(year)i"
158
159#: Mailman/Archiver/HyperArch.py:954
160msgid "%(day)i %(month)s %(year)i"
161msgstr "%(day)i %(month)s %(year)i"
162
163#: Mailman/Archiver/HyperArch.py:1054
164msgid "Computing threaded index\n"
165msgstr "������� ����������� ��� ������������\n"
166
167#: Mailman/Archiver/HyperArch.py:1319
168msgid "Updating HTML for article %(seq)s"
169msgstr "�������� ��� HTML ��� �� ����� %(seq)s"
170
171#: Mailman/Archiver/HyperArch.py:1326
172msgid "article file %(filename)s is missing!"
173msgstr "�� %(filename)s ������ ��� ������ ������!"
174
175#: Mailman/Archiver/pipermail.py:302
176msgid "Creating archive directory "
177msgstr "���������� ��������� ��� �� �������� ������"
178
179#: Mailman/Archiver/pipermail.py:314
180msgid "Reloading pickled archive state"
181msgstr "������������ ��� ���������� ��� ������� ��������� �������"
182
183#: Mailman/Archiver/pipermail.py:341
184msgid "Pickling archive state into "
185msgstr "Pickling archive state into "
186
187#: Mailman/Archiver/pipermail.py:453
188msgid "Updating index files for archive [%(archive)s]"
189msgstr "�������� ��� ������� ��������� ��� �� �������� ������ [%(archive)s]"
190
191#: Mailman/Archiver/pipermail.py:486
192msgid "  Thread"
193msgstr "  ��������� ���������"
194
195#: Mailman/Archiver/pipermail.py:597
196msgid "#%(counter)05d %(msgid)s"
197msgstr "#%(counter)05d %(msgid)s"
198
199#: Mailman/Bouncer.py:46
200msgid "due to excessive bounces"
201msgstr "���� ����������� bounces"
202
203#: Mailman/Bouncer.py:47
204msgid "by yourself"
205msgstr "��� �����"
206
207#: Mailman/Bouncer.py:48
208msgid "by the list administrator"
209msgstr "��� �� ����������� ��� ������"
210
211#: Mailman/Bouncer.py:49 Mailman/Bouncer.py:297 Mailman/Commands/cmd_set.py:182
212msgid "for unknown reasons"
213msgstr "��� ��������� ������"
214
215#: Mailman/Bouncer.py:199
216msgid "bounce score incremented"
217msgstr ""
218
219#: Mailman/Bouncer.py:229
220msgid "disabled"
221msgstr "����������������"
222
223#: Mailman/Bouncer.py:246
224msgid "Bounce action notification"
225msgstr "���������� ��������� ���������� ���������"
226
227#: Mailman/Bouncer.py:271
228#, fuzzy
229msgid "disabled address"
230msgstr "����������������"
231
232#: Mailman/Bouncer.py:304
233msgid " The last bounce received from you was dated %(date)s"
234msgstr ""
235" �� ��������� ������������� ������ �� ����� ������ ��� ���� ���� ���� "
236"%(date)s"
237
238#: Mailman/Bouncer.py:333 Mailman/Deliverer.py:146
239#: Mailman/Handlers/Acknowledge.py:44 Mailman/Handlers/CookHeaders.py:441
240#: Mailman/Handlers/Hold.py:215 Mailman/Handlers/ToDigest.py:250
241#: Mailman/ListAdmin.py:225
242msgid "(no subject)"
243msgstr "(��� ������� ����)"
244
245#: Mailman/Bouncer.py:337
246msgid "[No bounce details are available]"
247msgstr "[��� �������� ���������� ������������ ��� ���������� ���������]"
248
249#: Mailman/Cgi/Auth.py:48
250msgid "Moderator"
251msgstr "����������"
252
253#: Mailman/Cgi/Auth.py:50
254msgid "Administrator"
255msgstr "�����������"
256
257#: Mailman/Cgi/admin.py:82 Mailman/Cgi/admindb.py:121 Mailman/Cgi/confirm.py:62
258#: Mailman/Cgi/edithtml.py:86 Mailman/Cgi/listinfo.py:55
259#: Mailman/Cgi/options.py:101 Mailman/Cgi/private.py:108
260#: Mailman/Cgi/rmlist.py:75 Mailman/Cgi/roster.py:59
261#: Mailman/Cgi/subscribe.py:67
262msgid "No such list <em>%(safelistname)s</em>"
263msgstr "��� ������� ������ ����� <em>%(safelistname)s</em>"
264
265#: Mailman/Cgi/admin.py:97 Mailman/Cgi/admindb.py:136 Mailman/Cgi/confirm.py:80
266#: Mailman/Cgi/confirm.py:334 Mailman/Cgi/create.py:50
267#: Mailman/Cgi/edithtml.py:103 Mailman/Cgi/listinfo.py:67
268#: Mailman/Cgi/options.py:120 Mailman/Cgi/private.py:125
269#: Mailman/Cgi/rmlist.py:48 Mailman/Cgi/roster.py:72 Mailman/Cgi/roster.py:153
270#: Mailman/Cgi/roster.py:154 Mailman/Cgi/subscribe.py:55
271#: Mailman/Cgi/subscribe.py:66 Mailman/Cgi/subscribe.py:81
272msgid "Error"
273msgstr "�����"
274
275#: Mailman/Cgi/admin.py:98 Mailman/Cgi/admindb.py:137 Mailman/Cgi/confirm.py:81
276#: Mailman/Cgi/create.py:51 Mailman/Cgi/edithtml.py:104
277#: Mailman/Cgi/listinfo.py:68 Mailman/Cgi/options.py:84
278#: Mailman/Cgi/options.py:121 Mailman/Cgi/private.py:126
279#: Mailman/Cgi/rmlist.py:49 Mailman/Cgi/roster.py:73
280#: Mailman/Cgi/subscribe.py:82
281msgid "Invalid options to CGI script."
282msgstr "�� ������� �������� ��� CGI script."
283
284#: Mailman/Cgi/admin.py:123 Mailman/Cgi/admindb.py:161
285#: Mailman/Cgi/edithtml.py:128 Mailman/Cgi/private.py:144
286msgid "Authorization failed."
287msgstr "� ������������� �������."
288
289#: Mailman/Cgi/admin.py:221 Mailman/Cgi/admindb.py:243
290#: Mailman/Cgi/edithtml.py:184 Mailman/Cgi/options.py:334
291msgid "The form lifetime has expired. (request forgery check)"
292msgstr ""
293
294#: Mailman/Cgi/admin.py:227
295msgid ""
296"You have turned off delivery of both digest and\n"
297"                non-digest messages.  This is an incompatible state of\n"
298"                affairs.  You must turn on either digest delivery or\n"
299"                non-digest delivery or your mailing list will basically be\n"
300"                unusable."
301msgstr ""
302"����� ��������������� ��� �������� ��� ��� �������������� (digest) ���\n"
303"                �� �������������� (non-digest) ���������. ���� ��� ����� "
304"��������.\n"
305"                ������ �� �������������� ������ ��� ��� ���\n"
306"                ������ ��������� ��������� ����������� � ����� ��� �� �� "
307"������\n"
308"�� ��������������."
309
310#: Mailman/Cgi/admin.py:231 Mailman/Cgi/admin.py:239 Mailman/Cgi/admin.py:246
311#: Mailman/Cgi/admin.py:1774 Mailman/Gui/GUIBase.py:209
312msgid "Warning: "
313msgstr "�������������: "
314
315#: Mailman/Cgi/admin.py:236
316msgid ""
317"You have digest members, but digests are turned\n"
318"                off. Those people will not receive mail.\n"
319"                Affected member(s) %(dm)r."
320msgstr ""
321"����� ���� �� ����� ��������� �� �������� �������������,  \n"
322"���� � ���������� �������������� ��������� (digest)\n"
323"               ���� ���������������. ����� �� ������� ��� �� ������ "
324"��������.\n"
325"                ���� ��� ������������ %(dm)r."
326
327#: Mailman/Cgi/admin.py:243
328msgid ""
329"You have regular list members but non-digestified mail is\n"
330"                turned off.  They will receive non-digestified mail until "
331"you\n"
332"                fix this problem. Affected member(s) %(rm)r."
333msgstr ""
334"����� �������� ���� ��� ����� ���� � ��-������������� �������� ���������\n"
335"                ����� ����������������.  ���� �� ���� �� �� ��������� "
336"��������\n"
337"                ����� �� ���������� �� ��������.                ���� ��� "
338"������������ %(rm)r."
339
340#: Mailman/Cgi/admin.py:268
341msgid "%(hostname)s mailing lists - Admin Links"
342msgstr "%(hostname)s ������ ������������ ������������ - ��������� �����������"
343
344#: Mailman/Cgi/admin.py:303 Mailman/Cgi/listinfo.py:121
345msgid "Welcome!"
346msgstr "����� ������!"
347
348#: Mailman/Cgi/admin.py:306 Mailman/Cgi/listinfo.py:124
349msgid "Mailman"
350msgstr "Mailman"
351
352#: Mailman/Cgi/admin.py:310
353msgid ""
354"<p>There currently are no publicly-advertised %(mailmanlink)s\n"
355"            mailing lists on %(hostname)s."
356msgstr ""
357"<p>��� �������� �������� %(mailmanlink)s\n"
358"            ������ ��� %(hostname)s."
359
360#: Mailman/Cgi/admin.py:316
361msgid ""
362"<p>Below is the collection of publicly-advertised\n"
363"            %(mailmanlink)s mailing lists on %(hostname)s.  Click on a list\n"
364"            name to visit the configuration pages for that list."
365msgstr ""
366"<p>�������� ��������� ���� �� �������� %(mailmanlink)s ������\n"
367"            ������������ ������������ ��� %(hostname)s.  �������� ��� �����\n"
368"            ��� �� ������������ ��� ������� ����������� ��� ������ �����."
369
370#: Mailman/Cgi/admin.py:323
371msgid "right "
372msgstr "����� "
373
374#: Mailman/Cgi/admin.py:325
375msgid ""
376"To visit the administrators configuration page for an\n"
377"        unadvertised list, open a URL similar to this one, but with a '/' "
378"and\n"
379"        the %(extra)slist name appended.  If you have the proper authority,\n"
380"        you can also <a href=\"%(creatorurl)s\">create a new mailing list</"
381"a>.\n"
382"\n"
383"        <p>General list information can be found at "
384msgstr ""
385"��� �� ������������ �� ������������� ������ ����������� ��� ���\n"
386"        ����� ��� ��� ����� �������, ������� ��� URL �������� �� �� ������, "
387"���� �� ��� '/' ���\n"
388"        �� %(extra)s ����� ��� ������ ��� ��������.  �� ����� ��� ��������� "
389"�������������,\n"
390"        �������� ������ <a href=\"%(creatorurl)s\">�� ������������� ��� ��� "
391"����� ������������ ������������</a>.\n"
392"\n"
393"        <p>������� ����������� ��� �� ����� �������� �� ������ ���: "
394
395#: Mailman/Cgi/admin.py:332
396msgid "the mailing list overview page"
397msgstr "������ ��� ������"
398
399#: Mailman/Cgi/admin.py:334
400msgid "<p>(Send questions and comments to "
401msgstr "<p>(������� �� ��������� ��� �� ������ ��� ��� "
402
403#: Mailman/Cgi/admin.py:344 Mailman/Cgi/listinfo.py:156 cron/mailpasswds:216
404msgid "List"
405msgstr "�����"
406
407#: Mailman/Cgi/admin.py:345 Mailman/Cgi/admin.py:613
408#: Mailman/Cgi/listinfo.py:157
409msgid "Description"
410msgstr "���������"
411
412#: Mailman/Cgi/admin.py:351 Mailman/Cgi/listinfo.py:163 bin/list_lists:130
413msgid "[no description available]"
414msgstr "[��� ������� ��������� ���������]"
415
416#: Mailman/Cgi/admin.py:385
417msgid "No valid variable name found."
418msgstr "�� ������� ������ ����� ����������"
419
420#: Mailman/Cgi/admin.py:395
421msgid ""
422"%(realname)s Mailing list Configuration Help\n"
423"    <br><em>%(varname)s</em> Option"
424msgstr ""
425"������� ��� �� ���������� ��� ������ %(realname)s\n"
426"    <br>������� <em>%(varname)s</em>"
427
428#: Mailman/Cgi/admin.py:402
429msgid "Mailman %(varname)s List Option Help"
430msgstr "������� ��� ��� %(varname)s ������� ��� ������ ��� Mailman"
431
432#: Mailman/Cgi/admin.py:420
433msgid ""
434"<em><strong>Warning:</strong> changing this option here\n"
435"    could cause other screens to be out-of-sync.  Be sure to reload any "
436"other\n"
437"    pages that are displaying this option for this mailing list.  You can "
438"also\n"
439"    "
440msgstr ""
441"<em><strong>�������������:</strong> �� ��� ������ ����� ��� �������� ��� \n"
442"������ ����� ������� �� ������ ��� ��������� ����. ����������� ��� �� "
443"������������� \n"
444"���� ��� ����� ������� ��� ������������ ���� ��� ������� ��� ���� �� �����. "
445"�������� ������ ��\n"
446"    "
447
448#: Mailman/Cgi/admin.py:431
449msgid "return to the %(categoryname)s options page."
450msgstr "����������� ��� ������ ��������:  %(categoryname)s"
451
452#: Mailman/Cgi/admin.py:446
453msgid "%(realname)s Administration (%(label)s)"
454msgstr " (%(label)s) ���������� %(realname)s"
455
456#: Mailman/Cgi/admin.py:447
457msgid "%(realname)s mailing list administration<br>%(label)s Section"
458msgstr "���������� ��� ������ %(realname)s <br> %(label)s"
459
460#: Mailman/Cgi/admin.py:464
461msgid "Configuration Categories"
462msgstr "���������� �����������"
463
464#: Mailman/Cgi/admin.py:465
465msgid "Other Administrative Activities"
466msgstr "'����� �������������� �����������"
467
468#: Mailman/Cgi/admin.py:469
469msgid "Tend to pending moderator requests"
470msgstr "������� ������������� ��������"
471
472#: Mailman/Cgi/admin.py:471
473msgid "Go to the general list information page"
474msgstr "������� ��� ������ ������ ����������� ��� ������"
475
476#: Mailman/Cgi/admin.py:473 Mailman/Cgi/edithtml.py:203
477msgid "Edit the public HTML pages and text files"
478msgstr "����������� ��� �������� HTML ������� ��� �������"
479
480#: Mailman/Cgi/admin.py:475
481msgid "Go to list archives"
482msgstr "������� ��� �������� ������ ��� ������"
483
484#: Mailman/Cgi/admin.py:481
485msgid "Delete this mailing list"
486msgstr "�������� ����� ��� ������"
487
488#: Mailman/Cgi/admin.py:482
489msgid " (requires confirmation)<br>&nbsp;<br>"
490msgstr " (������� �����������)<br>&nbsp;<br>"
491
492#: Mailman/Cgi/admin.py:488 Mailman/Cgi/admindb.py:258
493#: Mailman/Cgi/admindb.py:340
494msgid "Logout"
495msgstr "������"
496
497#: Mailman/Cgi/admin.py:532
498msgid "Emergency moderation of all list traffic is enabled"
499msgstr ""
500"���� ������������� � ���������� ���������� ���������� ��� ��� ��� ������ ��� "
501"������"
502
503#: Mailman/Cgi/admin.py:543
504msgid ""
505"Make your changes in the following section, then submit them\n"
506"        using the <em>Submit Your Changes</em> button below."
507msgstr ""
508"��������������� ��� ������� ��� ���� �������� �������, ��� ������� ���\n"
509"       ��������������� �� ������� <em>�������� ��� �������</em> ��� ������� "
510"��� ���� ����� ��� �������."
511
512#: Mailman/Cgi/admin.py:561
513msgid "Additional Member Tasks"
514msgstr "��������� �������� �����"
515
516#: Mailman/Cgi/admin.py:567
517msgid ""
518"<li>Set everyone's moderation bit, including\n"
519"            those members not currently visible"
520msgstr ""
521"<li>����� �� ����� ����������� ��� �����, �������������������\n"
522"            ��� ���� ����� ��� ����� ���� �� ������ �����"
523
524#: Mailman/Cgi/admin.py:571
525msgid "Off"
526msgstr "��������"
527
528#: Mailman/Cgi/admin.py:571
529msgid "On"
530msgstr "������"
531
532#: Mailman/Cgi/admin.py:573
533msgid "Set"
534msgstr "�������"
535
536#: Mailman/Cgi/admin.py:614
537msgid "Value"
538msgstr "����"
539
540#: Mailman/Cgi/admin.py:668
541msgid ""
542"Badly formed options entry:\n"
543" %(record)s"
544msgstr ""
545"���������� ����� ��� �������� ��� ��������:\n"
546" %(record)s"
547
548#: Mailman/Cgi/admin.py:726
549msgid "<em>Enter the text below, or...</em><br>"
550msgstr "<em>�������� �� ������� ��������, �...</em><br>"
551
552#: Mailman/Cgi/admin.py:728
553msgid "<br><em>...specify a file to upload</em><br>"
554msgstr "<br><em>...������ �� ������ ��� �� ���������</em><br>"
555
556#: Mailman/Cgi/admin.py:754 Mailman/Cgi/admin.py:757
557msgid "Topic %(i)d"
558msgstr "���� %(i)d"
559
560#: Mailman/Cgi/admin.py:758 Mailman/Cgi/admin.py:808
561msgid "Delete"
562msgstr "��������"
563
564#: Mailman/Cgi/admin.py:759
565msgid "Topic name:"
566msgstr "����� �������:"
567
568#: Mailman/Cgi/admin.py:761
569msgid "Regexp:"
570msgstr "Regexp:"
571
572#: Mailman/Cgi/admin.py:764 Mailman/Cgi/options.py:1153
573msgid "Description:"
574msgstr "���������:"
575
576#: Mailman/Cgi/admin.py:768 Mailman/Cgi/admin.py:826
577msgid "Add new item..."
578msgstr "�������� ���� ���������..."
579
580#: Mailman/Cgi/admin.py:770 Mailman/Cgi/admin.py:828
581msgid "...before this one."
582msgstr "...���� ��� ����."
583
584#: Mailman/Cgi/admin.py:771 Mailman/Cgi/admin.py:829
585msgid "...after this one."
586msgstr "...���� ��� ����."
587
588#: Mailman/Cgi/admin.py:804 Mailman/Cgi/admin.py:807
589msgid "Spam Filter Rule %(i)d"
590msgstr "������� �������������� Spam %(i)d"
591
592#: Mailman/Cgi/admin.py:809
593msgid "Spam Filter Regexp:"
594msgstr "k������� ������� (Regexp) Spam ������� :"
595
596#: Mailman/Cgi/admin.py:820 Mailman/Cgi/admindb.py:398
597#: Mailman/Cgi/admindb.py:462 Mailman/Cgi/admindb.py:516
598#: Mailman/Cgi/admindb.py:760
599msgid "Defer"
600msgstr "����� ��������"
601
602#: Mailman/Cgi/admin.py:820 Mailman/Cgi/admindb.py:400
603#: Mailman/Cgi/admindb.py:464 Mailman/Cgi/admindb.py:516
604#: Mailman/Cgi/admindb.py:760 Mailman/Gui/ContentFilter.py:37
605#: Mailman/Gui/Privacy.py:265 Mailman/Gui/Privacy.py:288
606#: Mailman/Gui/Privacy.py:474
607msgid "Reject"
608msgstr "��������"
609
610#: Mailman/Cgi/admin.py:820 Mailman/Gui/Privacy.py:265
611#: Mailman/Gui/Privacy.py:474
612msgid "Hold"
613msgstr "�������"
614
615#: Mailman/Cgi/admin.py:821 Mailman/Cgi/admindb.py:401
616#: Mailman/Cgi/admindb.py:465 Mailman/Cgi/admindb.py:516
617#: Mailman/Cgi/admindb.py:760 Mailman/Commands/cmd_confirm.py:93
618#: Mailman/Gui/ContentFilter.py:37 Mailman/Gui/Privacy.py:265
619#: Mailman/Gui/Privacy.py:289 Mailman/Gui/Privacy.py:474
620msgid "Discard"
621msgstr "�������� ����� ���������"
622
623#: Mailman/Cgi/admin.py:821 Mailman/Cgi/admindb.py:516
624#: Mailman/Gui/Privacy.py:288 Mailman/Gui/Privacy.py:474
625msgid "Accept"
626msgstr "�������"
627
628#: Mailman/Cgi/admin.py:824 Mailman/Cgi/admindb.py:764
629msgid "Action:"
630msgstr "���������:"
631
632#: Mailman/Cgi/admin.py:836
633msgid "Move rule up"
634msgstr "���������� ������ ����"
635
636#: Mailman/Cgi/admin.py:837
637msgid "Move rule down"
638msgstr "���������� ������ ����"
639
640#: Mailman/Cgi/admin.py:870
641msgid "<br>(Edit <b>%(varname)s</b>)"
642msgstr "<br>(����������� <b>%(varname)s</b>)"
643
644#: Mailman/Cgi/admin.py:872
645msgid "<br>(Details for <b>%(varname)s</b>)"
646msgstr "<br>(������������ ��� <b>%(varname)s</b>)"
647
648#: Mailman/Cgi/admin.py:879
649msgid ""
650"<br><em><strong>Note:</strong>\n"
651"        setting this value performs an immediate action but does not modify\n"
652"        permanent state.</em>"
653msgstr ""
654"<br><em><strong>��������:</strong>\n"
655"        � ������� ����� ��� ����� �������� ����� ����� ���� ��� ����������\n"
656"        ��� ������ ���������.</em>"
657
658#: Mailman/Cgi/admin.py:893
659msgid "Mass Subscriptions"
660msgstr "������� ��������"
661
662#: Mailman/Cgi/admin.py:900
663msgid "Mass Removals"
664msgstr "������� ���������"
665
666#: Mailman/Cgi/admin.py:907
667#, fuzzy
668msgid "Address Change"
669msgstr "���������/�����"
670
671#: Mailman/Cgi/admin.py:914
672#, fuzzy
673msgid "Sync Membership List"
674msgstr "����� �����"
675
676#: Mailman/Cgi/admin.py:921
677msgid "Membership List"
678msgstr "����� �����"
679
680#: Mailman/Cgi/admin.py:929
681msgid "(help)"
682msgstr "(�������)"
683
684#: Mailman/Cgi/admin.py:930
685msgid "Find member %(link)s:"
686msgstr "������ ������ %(link)s:"
687
688#: Mailman/Cgi/admin.py:933
689msgid "Search..."
690msgstr "���������..."
691
692#: Mailman/Cgi/admin.py:959
693msgid "Bad regular expression: "
694msgstr "���������� �������� ������� (regular expression): "
695
696#: Mailman/Cgi/admin.py:1013
697msgid "%(allcnt)s members total, %(membercnt)s shown"
698msgstr "%(allcnt)s ������ �����, %(membercnt)s �����"
699
700#: Mailman/Cgi/admin.py:1016
701msgid "%(allcnt)s members total"
702msgstr "%(allcnt)s ������ �����"
703
704#: Mailman/Cgi/admin.py:1043 Mailman/Cgi/admin.py:1075
705msgid "unsub"
706msgstr "��������"
707
708#: Mailman/Cgi/admin.py:1044
709msgid "member address<br>member name"
710msgstr "��������� ������<br>����� ������"
711
712#: Mailman/Cgi/admin.py:1045 Mailman/Cgi/admin.py:1089
713msgid "mod"
714msgstr "���"
715
716#: Mailman/Cgi/admin.py:1045 Mailman/Cgi/admin.py:1091
717msgid "hide"
718msgstr "��������"
719
720#: Mailman/Cgi/admin.py:1046
721msgid "nomail<br>[reason]"
722msgstr "����� mail<br>[�����]"
723
724#: Mailman/Cgi/admin.py:1047
725msgid "not metoo"
726msgstr "��� ���"
727
728#: Mailman/Cgi/admin.py:1047 Mailman/Cgi/admin.py:1091
729msgid "ack"
730msgstr "����"
731
732#: Mailman/Cgi/admin.py:1048 Mailman/Cgi/admin.py:1091
733msgid "nodupes"
734msgstr "��� �����"
735
736#: Mailman/Cgi/admin.py:1049 Mailman/Cgi/admin.py:1115
737#: Mailman/Cgi/options.py:394
738msgid "digest"
739msgstr "������"
740
741#: Mailman/Cgi/admin.py:1049 Mailman/Cgi/admin.py:1130
742msgid "plain"
743msgstr "���� �������"
744
745#: Mailman/Cgi/admin.py:1050
746msgid "language"
747msgstr "������"
748
749#: Mailman/Cgi/admin.py:1061
750msgid "?"
751msgstr ";"
752
753#: Mailman/Cgi/admin.py:1062
754msgid "U"
755msgstr "U"
756
757#: Mailman/Cgi/admin.py:1063
758msgid "A"
759msgstr "�"
760
761#: Mailman/Cgi/admin.py:1064
762msgid "B"
763msgstr "�"
764
765#: Mailman/Cgi/admin.py:1091
766msgid "notmetoo"
767msgstr "��� ���"
768
769#: Mailman/Cgi/admin.py:1091 Mailman/Cgi/options.py:392
770msgid "nomail"
771msgstr "����� mail"
772
773#: Mailman/Cgi/admin.py:1145
774msgid "<b>unsub</b> -- Click on this to unsubscribe the member."
775msgstr "<b>��������</b> -- ������� ��� ��� �� ���������� ���� �� �����."
776
777#: Mailman/Cgi/admin.py:1147
778msgid ""
779"<b>mod</b> -- The user's personal moderation flag.  If this is\n"
780"        set, postings from them will be moderated, otherwise they will be\n"
781"        approved."
782msgstr ""
783"<b>���</b> -- � ���������� ������� ����������� ��� ������.  �� ���� \n"
784"        �������, �� ������� ������� ��� ��� ����������, ��� ��� �������� "
785"����������� ��� �����, ����������� �� �����������.\n"
786" "
787
788#: Mailman/Cgi/admin.py:1151
789msgid ""
790"<b>hide</b> -- Is the member's address concealed on\n"
791"        the list of subscribers?"
792msgstr ""
793"<b>��������</b> -- ����� ����� � ��������� ��� ������\n"
794"        ����� ���������� ������� ��� ������;"
795
796#: Mailman/Cgi/admin.py:1153
797msgid ""
798"<b>nomail</b> -- Is delivery to the member disabled?  If so, an\n"
799"        abbreviation will be given describing the reason for the disabled\n"
800"        delivery:\n"
801"            <ul><li><b>U</b> -- Delivery was disabled by the user via their\n"
802"                    personal options page.\n"
803"                <li><b>A</b> -- Delivery was disabled by the list\n"
804"                    administrators.\n"
805"                <li><b>B</b> -- Delivery was disabled by the system due to\n"
806"                    excessive bouncing from the member's address.\n"
807"                <li><b>?</b> -- The reason for disabled delivery isn't "
808"known.\n"
809"                    This is the case for all memberships which were "
810"disabled\n"
811"                    in older versions of Mailman.\n"
812"            </ul>"
813msgstr ""
814"<b>����� mail</b> -- ����� ���������������� � �������� �� ���� �� �����; �� "
815"���,\n"
816"        ��� ������� ��������� �� ������� ��� �� ���� ��� ���������������\n"
817"        ��� ���������:\n"
818"            <ul><li><b>U</b> -- � �������� ���� ��������������� ��� �� "
819"������ ���� ��� ��\n"
820"                    ������ ��� ���������� �������� ���.\n"
821"                <li><b>A</b> -- � �������� ���� ��������������� ��� ���� "
822"������������\n"
823"                    ��� ������.\n"
824"                <li><b>B</b> -- � �������� ���� ��������������� ��� �� "
825"������� ����\n"
826"                    ������� ������� �������������� ��������� ��� �� "
827"���������\n"
828"                    ��� ������.\n"
829"                <li><b>?</b> -- � ����� ��� ��� �������������� ��� ��������� "
830"��� ���������\n"
831"                    ��� ����� �������. ���� ��������� ��� ��� �� ���� �� "
832"����� ����� ���������������\n"
833"                    �� ����������� �������� ��� Mailman.\n"
834"            </ul>"
835
836#: Mailman/Cgi/admin.py:1168
837msgid ""
838"<b>ack</b> -- Does the member get acknowledgements of their\n"
839"        posts?"
840msgstr ""
841"<b>����</b> -- ������� ����� � ������� �������������\n"
842"��� ��������� ���;"
843
844#: Mailman/Cgi/admin.py:1171
845msgid ""
846"<b>not metoo</b> -- Does the member want to avoid copies of their\n"
847"        own postings?"
848msgstr ""
849"<b>��� ���</b> -- �� ����� ���� ����� �� ��� �������� ���������\n"
850"��� ����� ��� ���������;"
851
852#: Mailman/Cgi/admin.py:1174
853msgid ""
854"<b>nodupes</b> -- Does the member want to avoid duplicates of the\n"
855"        same message?"
856msgstr ""
857"<b>��� �����</b> -- �� ��� �������� �� ����� ����� ��������� ���\n"
858"����� ���������;"
859
860#: Mailman/Cgi/admin.py:1177
861msgid ""
862"<b>digest</b> -- Does the member get messages in digests?\n"
863"        (otherwise, individual messages)"
864msgstr ""
865"<b>������</b> -- �� ����� �������� �� �������� �������������; \n"
866"        (�����������, ��������� ��������)"
867
868#: Mailman/Cgi/admin.py:1180
869msgid ""
870"<b>plain</b> -- If getting digests, does the member get plain\n"
871"        text digests?  (otherwise, MIME)"
872msgstr ""
873"<b>���� �������</b> -- ���� ��������� ��� �� mail ���������� ������������� "
874"��� �����,\n"
875"        ����� �� ���� �������;  (�����������, MIME)"
876
877#: Mailman/Cgi/admin.py:1182
878msgid "<b>language</b> -- Language preferred by the user"
879msgstr "<b>������</b> -- � ������ ��� ����� ������� � �������"
880
881#: Mailman/Cgi/admin.py:1196
882msgid "Click here to hide the legend for this table."
883msgstr "������� ��� ��� �� ������� �� ������� ��� ������."
884
885#: Mailman/Cgi/admin.py:1200
886msgid "Click here to include the legend for this table."
887msgstr "������� ��� ��� �� ������������� � ������� ��� ������."
888
889#: Mailman/Cgi/admin.py:1207
890msgid ""
891"<p><em>To view more members, click on the appropriate\n"
892"        range listed below:</em>"
893msgstr ""
894"<p><em>��� �� ����� ����������� ����, ������� ��� ���������\n"
895"        �������� ��������:</em>"
896
897#: Mailman/Cgi/admin.py:1221
898msgid "from %(start)s to %(end)s"
899msgstr "��� %(start)s ����� %(end)s"
900
901#: Mailman/Cgi/admin.py:1234
902msgid "Subscribe these users now or invite them?"
903msgstr "�� ����� ������� ����� ��� ������� ���� � ���������;"
904
905#: Mailman/Cgi/admin.py:1236
906msgid "Invite"
907msgstr "���������"
908
909#: Mailman/Cgi/admin.py:1236 Mailman/Cgi/listinfo.py:199
910msgid "Subscribe"
911msgstr "�������"
912
913#: Mailman/Cgi/admin.py:1243
914msgid "Send welcome messages to new subscribers?"
915msgstr "�������� ��������� �������������� ��� ��� ���� ��� ������;"
916
917#: Mailman/Cgi/admin.py:1245 Mailman/Cgi/admin.py:1254
918#: Mailman/Cgi/admin.py:1287 Mailman/Cgi/admin.py:1295
919#: Mailman/Cgi/confirm.py:304 Mailman/Cgi/create.py:371
920#: Mailman/Cgi/create.py:406 Mailman/Cgi/create.py:444
921#: Mailman/Cgi/rmlist.py:248 Mailman/Gui/Archive.py:33
922#: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62
923#: Mailman/Gui/Autoresponse.py:71 Mailman/Gui/Bounce.py:77
924#: Mailman/Gui/Bounce.py:120 Mailman/Gui/Bounce.py:146
925#: Mailman/Gui/Bounce.py:155 Mailman/Gui/Bounce.py:164
926#: Mailman/Gui/ContentFilter.py:74 Mailman/Gui/ContentFilter.py:116
927#: Mailman/Gui/ContentFilter.py:120 Mailman/Gui/Digest.py:46
928#: Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84 Mailman/Gui/Digest.py:89
929#: Mailman/Gui/General.py:158 Mailman/Gui/General.py:223
930#: Mailman/Gui/General.py:229 Mailman/Gui/General.py:307
931#: Mailman/Gui/General.py:334 Mailman/Gui/General.py:361
932#: Mailman/Gui/General.py:372 Mailman/Gui/General.py:375
933#: Mailman/Gui/General.py:385 Mailman/Gui/General.py:390
934#: Mailman/Gui/General.py:396 Mailman/Gui/General.py:416
935#: Mailman/Gui/General.py:448 Mailman/Gui/General.py:471
936#: Mailman/Gui/General.py:488 Mailman/Gui/General.py:511
937#: Mailman/Gui/NonDigest.py:45 Mailman/Gui/NonDigest.py:53
938#: Mailman/Gui/NonDigest.py:140 Mailman/Gui/NonDigest.py:162
939#: Mailman/Gui/Privacy.py:111 Mailman/Gui/Privacy.py:129
940#: Mailman/Gui/Privacy.py:162 Mailman/Gui/Privacy.py:215
941#: Mailman/Gui/Privacy.py:317 Mailman/Gui/Privacy.py:334
942#: Mailman/Gui/Privacy.py:489 Mailman/Gui/Privacy.py:508
943#: Mailman/Gui/Usenet.py:52 Mailman/Gui/Usenet.py:56 Mailman/Gui/Usenet.py:93
944#: Mailman/Gui/Usenet.py:105
945msgid "No"
946msgstr "���"
947
948#: Mailman/Cgi/admin.py:1245 Mailman/Cgi/admin.py:1254
949#: Mailman/Cgi/admin.py:1287 Mailman/Cgi/admin.py:1295
950#: Mailman/Cgi/confirm.py:304 Mailman/Cgi/create.py:371
951#: Mailman/Cgi/create.py:406 Mailman/Cgi/create.py:444
952#: Mailman/Cgi/rmlist.py:248 Mailman/Gui/Archive.py:33
953#: Mailman/Gui/Autoresponse.py:54 Mailman/Gui/Autoresponse.py:62
954#: Mailman/Gui/Bounce.py:77 Mailman/Gui/Bounce.py:120 Mailman/Gui/Bounce.py:146
955#: Mailman/Gui/Bounce.py:155 Mailman/Gui/Bounce.py:164
956#: Mailman/Gui/ContentFilter.py:74 Mailman/Gui/ContentFilter.py:116
957#: Mailman/Gui/ContentFilter.py:120 Mailman/Gui/Digest.py:46
958#: Mailman/Gui/Digest.py:62 Mailman/Gui/Digest.py:84 Mailman/Gui/Digest.py:89
959#: Mailman/Gui/General.py:223 Mailman/Gui/General.py:229
960#: Mailman/Gui/General.py:307 Mailman/Gui/General.py:334
961#: Mailman/Gui/General.py:361 Mailman/Gui/General.py:372
962#: Mailman/Gui/General.py:375 Mailman/Gui/General.py:385
963#: Mailman/Gui/General.py:390 Mailman/Gui/General.py:396
964#: Mailman/Gui/General.py:416 Mailman/Gui/General.py:448
965#: Mailman/Gui/General.py:471 Mailman/Gui/General.py:488
966#: Mailman/Gui/General.py:511 Mailman/Gui/NonDigest.py:45
967#: Mailman/Gui/NonDigest.py:53 Mailman/Gui/NonDigest.py:140
968#: Mailman/Gui/NonDigest.py:162 Mailman/Gui/Privacy.py:111
969#: Mailman/Gui/Privacy.py:129 Mailman/Gui/Privacy.py:162
970#: Mailman/Gui/Privacy.py:215 Mailman/Gui/Privacy.py:317
971#: Mailman/Gui/Privacy.py:334 Mailman/Gui/Privacy.py:489
972#: Mailman/Gui/Privacy.py:508 Mailman/Gui/Usenet.py:52 Mailman/Gui/Usenet.py:56
973#: Mailman/Gui/Usenet.py:93 Mailman/Gui/Usenet.py:105
974msgid "Yes"
975msgstr "���"
976
977#: Mailman/Cgi/admin.py:1252
978msgid "Send notifications of new subscriptions to the list owner?"
979msgstr "�������� ����������� ���� ��������� ��� ������ ��� ��� ���� ��������;"
980
981#: Mailman/Cgi/admin.py:1260 Mailman/Cgi/admin.py:1301
982#: Mailman/Cgi/admin.py:1347
983msgid "Enter one address per line below..."
984msgstr "�������� ��� ��������� ��� ������ �������� ..."
985
986#: Mailman/Cgi/admin.py:1265 Mailman/Cgi/admin.py:1306
987#: Mailman/Cgi/admin.py:1352
988msgid "...or specify a file to upload:"
989msgstr "...� ������ ��� ������ �� ����� ������ �� ���������:"
990
991#: Mailman/Cgi/admin.py:1270
992msgid ""
993"Below, enter additional text to be added to the\n"
994"    top of your invitation or the subscription notification.  Include at "
995"least\n"
996"    one blank line at the end..."
997msgstr ""
998"��������, �������� �������� ������� �� ����� �� ��������� ��� ����\n"
999"    ����� ��� ���������� � ��� ����������� ��������. ������ �� ������������� "
1000"�����������\n"
1001"    ��� ���� ������ ��� �����..."
1002
1003#: Mailman/Cgi/admin.py:1285
1004msgid "Send unsubscription acknowledgement to the user?"
1005msgstr "�� ������ ����������� ��������� ��� �� ����� ��� ������;"
1006
1007#: Mailman/Cgi/admin.py:1293
1008msgid "Send notifications to the list owner?"
1009msgstr "�� ������� ������������ ���� ��������� ��� ������:"
1010
1011#: Mailman/Cgi/admin.py:1316
1012msgid ""
1013"To change a list member's address, enter the\n"
1014"    member's current and new addresses below. Use the check boxes to send\n"
1015"    notice of the change to the old and/or new address(es)."
1016msgstr ""
1017
1018#: Mailman/Cgi/admin.py:1321
1019#, fuzzy
1020msgid "Member's current address"
1021msgstr "�� ������ �������� ������"
1022
1023#: Mailman/Cgi/admin.py:1325 Mailman/Cgi/admin.py:1335
1024msgid "Send notice"
1025msgstr ""
1026
1027#: Mailman/Cgi/admin.py:1331
1028msgid "Address to change to"
1029msgstr ""
1030
1031#: Mailman/Cgi/admin.py:1361
1032msgid "Change list ownership passwords"
1033msgstr "������ ��� ������� ��� ������"
1034
1035#: Mailman/Cgi/admin.py:1364
1036msgid ""
1037"The <em>list administrators</em> are the people who have ultimate control "
1038"over\n"
1039"all parameters of this mailing list.  They are able to change any list\n"
1040"configuration variable available through these administration web pages.\n"
1041"\n"
1042"<p>The <em>list moderators</em> have more limited permissions; they are not\n"
1043"able to change any list configuration variable, but they are allowed to "
1044"tend\n"
1045"to pending administration requests, including approving or rejecting held\n"
1046"subscription requests, and disposing of held postings.  Of course, the\n"
1047"<em>list administrators</em> can also tend to pending requests.\n"
1048"\n"
1049"<p>In order to split the list ownership duties into administrators and\n"
1050"moderators, you must set a separate moderator password in the fields below,\n"
1051"and also provide the email addresses of the list moderators in the\n"
1052"<a href=\"%(adminurl)s/general\">general options section</a>."
1053msgstr ""
1054"�� <em>������������ ���� ������</em> ����� �� ������� ��� ����� ��� ������� "
1055"������\n"
1056"�� ���� ��� ����������� ���� ������ ������������ ������������.  ������� �� "
1057"��������\n"
1058"���� ��������� ��� ����� ��������� ��� �� ���������� ��� ������ ���� ����� "
1059"���\n"
1060"�������������� �������.\n"
1061"\n"
1062"<p>�� <em>����������� ��� ������</em> ����� ��������� �����������. �� "
1063"�������\n"
1064"�� �������� ����� ��������� ��� ������, ���� ������� �� ��������� ��\n"
1065"������� ������������� ��������, ������������������� ��� �������� � "
1066"���������\n"
1067"���������� ��������� ��������, ��� ��� ��������� ���������� ���������.\n"
1068"������, �� <em>������������ ��� ������</em> ������� ������ �� ������ ����� "
1069"��� ���������.\n"
1070"\n"
1071"<p>��� �� ����� ������� � ����������� ��� ���������� ��� ������������ ���\n"
1072"��� �����������, ������ �� ������� ���� ���������� ������� ���������� ��� "
1073"�����\n"
1074"�������� ��� ������ �� ������ �� email ����������� ��� ����������� ��� "
1075"������ ����\n"
1076"<a href=\"%(adminurl)s/general\">������� ������� ��������</a>."
1077
1078#: Mailman/Cgi/admin.py:1383
1079msgid "Enter new administrator password:"
1080msgstr "�������� ��� ��� ������ �����������:"
1081
1082#: Mailman/Cgi/admin.py:1385
1083msgid "Confirm administrator password:"
1084msgstr "����������� ������� �����������:"
1085
1086#: Mailman/Cgi/admin.py:1390
1087msgid "Enter new moderator password:"
1088msgstr "�������� �� ��� ������ ����������:"
1089
1090#: Mailman/Cgi/admin.py:1392
1091msgid "Confirm moderator password:"
1092msgstr "����������� ������� ����������:"
1093
1094#: Mailman/Cgi/admin.py:1396
1095msgid ""
1096"In addition to the above passwords you may specify a password for\n"
1097"pre-approving posts to the list. Either of the above two passwords can\n"
1098"be used in an Approved: header or first body line pseudo-header to\n"
1099"pre-approve a post that would otherwise be held for moderation. In\n"
1100"addition, the password below, if set, can be used for that purpose and\n"
1101"no other."
1102msgstr ""
1103"��������� �� ���� �������� ��������, �������� �� ������������� ��� ������ � "
1104"������\n"
1105"�� �������������� ��� ��� ���������� ��� ��������� ��� �����. ������������ "
1106"��� ���� ��� �������� ������\n"
1107"�� �������������� �� ��� �����������: ����� � ���� ����� ������ ��� ������� "
1108"�������� ��� ������������ ����������� ��\n"
1109"����������� ��� ������ �� ����� �� ����������� ��������� �� ������ �� "
1110"�������� ��� �������. \n"
1111"� �������� �������, �� �����������, ������ �� �������������� ��� ���� ��� "
1112"���� �� ����� ���\n"
1113"��� ������� ����."
1114
1115#: Mailman/Cgi/admin.py:1407
1116msgid "Enter new poster password:"
1117msgstr "�������� �� ��� ������ �����������:"
1118
1119#: Mailman/Cgi/admin.py:1409
1120msgid "Confirm poster password:"
1121msgstr "����������� ������� �����������:"
1122
1123#: Mailman/Cgi/admin.py:1418
1124msgid "Submit Your Changes"
1125msgstr "�������� ��� �������"
1126
1127#: Mailman/Cgi/admin.py:1442
1128msgid "Moderator passwords did not match"
1129msgstr "�� ������� ��� ���������� ��� ����������"
1130
1131#: Mailman/Cgi/admin.py:1453
1132msgid "Poster passwords did not match"
1133msgstr "�� ������� ����������� ��� ����������."
1134
1135#: Mailman/Cgi/admin.py:1463
1136msgid "Administrator passwords did not match"
1137msgstr "�� ������� ��� ����������� ��� ����������"
1138
1139#: Mailman/Cgi/admin.py:1510
1140msgid "admin mass sub"
1141msgstr ""
1142
1143#: Mailman/Cgi/admin.py:1516
1144msgid "Already a member"
1145msgstr "����� ��� �����"
1146
1147#: Mailman/Cgi/admin.py:1519 Mailman/Cgi/admin.py:1693
1148msgid "&lt;blank line&gt;"
1149msgstr "&lt;���� ������&gt;"
1150
1151#: Mailman/Cgi/admin.py:1520 Mailman/Cgi/admin.py:1523
1152#: Mailman/Cgi/admin.py:1694 Mailman/Cgi/admin.py:1697
1153#: Mailman/Cgi/admindb.py:977
1154msgid "Bad/Invalid email address"
1155msgstr "����/��� ������ ��������� emai"
1156
1157#: Mailman/Cgi/admin.py:1526 Mailman/Cgi/admin.py:1700
1158msgid "Hostile address (illegal characters)"
1159msgstr "�� �������� ��������� (�� ��������� ����������)"
1160
1161#: Mailman/Cgi/admin.py:1529 Mailman/Cgi/admin.py:1703 bin/add_members:175
1162#: bin/clone_member:136 bin/sync_members:268
1163msgid "Banned address (matched %(pattern)s)"
1164msgstr "������������ ��������� (matched %(pattern)s)"
1165
1166#: Mailman/Cgi/admin.py:1535
1167msgid "Successfully invited:"
1168msgstr "� ����� ����� �� ��������:"
1169
1170#: Mailman/Cgi/admin.py:1537 Mailman/Cgi/admin.py:1728
1171msgid "Successfully subscribed:"
1172msgstr "� ������� ����� �� ��������:"
1173
1174#: Mailman/Cgi/admin.py:1542
1175msgid "Error inviting:"
1176msgstr "����� ���� ���������:"
1177
1178#: Mailman/Cgi/admin.py:1544 Mailman/Cgi/admin.py:1732
1179msgid "Error subscribing:"
1180msgstr "����� ���� �������:"
1181
1182#: Mailman/Cgi/admin.py:1568
1183msgid "admin mass unsub"
1184msgstr ""
1185
1186#: Mailman/Cgi/admin.py:1578 Mailman/Cgi/admin.py:1737
1187msgid "Successfully Unsubscribed:"
1188msgstr "����������� ��������:"
1189
1190#: Mailman/Cgi/admin.py:1583
1191msgid "Cannot unsubscribe non-members:"
1192msgstr "�� ������ �� ����� �������� ��-�����:"
1193
1194#: Mailman/Cgi/admin.py:1596
1195#, fuzzy
1196msgid "You must provide both current and new addresses."
1197msgstr "�� ������ �� ���������� ��� ����������� ����� ��������� �����."
1198
1199#: Mailman/Cgi/admin.py:1598
1200msgid "Current and new addresses must be different."
1201msgstr ""
1202
1203#: Mailman/Cgi/admin.py:1602
1204#, fuzzy
1205msgid "%(schange_to)s is already a list member."
1206msgstr " ����� ��� �����"
1207
1208#: Mailman/Cgi/admin.py:1607
1209#, fuzzy
1210msgid "%(schange_to)s is not a valid email address."
1211msgstr "������ �� ������ ��� ������ ��������� ������������ ������������."
1212
1213#: Mailman/Cgi/admin.py:1615
1214msgid "%(schange_from)s is not a member"
1215msgstr ""
1216
1217#: Mailman/Cgi/admin.py:1617
1218#, fuzzy
1219msgid "%(schange_to)s is already a member"
1220msgstr " ����� ��� �����"
1221
1222#: Mailman/Cgi/admin.py:1620
1223#, fuzzy
1224msgid "%(schange_to)s matches banned pattern %(spat)s"
1225msgstr "%(addr)s ������������ (���������: %(patt)s)"
1226
1227#: Mailman/Cgi/admin.py:1622
1228msgid "Address %(schange_from)s changed to %(schange_to)s"
1229msgstr ""
1230
1231#: Mailman/Cgi/admin.py:1629
1232msgid ""
1233"The member address %(change_from)s on the\n"
1234"%(list_name)s list has been changed to %(change_to)s.\n"
1235msgstr ""
1236
1237#: Mailman/Cgi/admin.py:1632
1238#, fuzzy
1239msgid "%(list_name)s address change notice."
1240msgstr "���������� ��������� ��� ��� %(realname)s"
1241
1242#: Mailman/Cgi/admin.py:1643
1243#, fuzzy
1244msgid "Notification sent to %(schange_from)s."
1245msgstr "������������"
1246
1247#: Mailman/Cgi/admin.py:1653
1248#, fuzzy
1249msgid "Notification sent to %(schange_to)s."
1250msgstr "������������"
1251
1252#: Mailman/Cgi/admin.py:1745
1253msgid "Bad moderation flag value"
1254msgstr "���������� ���� �������������� ����������"
1255
1256#: Mailman/Cgi/admin.py:1765
1257msgid "member mgt page"
1258msgstr ""
1259
1260#: Mailman/Cgi/admin.py:1770
1261msgid "Not subscribed"
1262msgstr "��� ������� �������"
1263
1264#: Mailman/Cgi/admin.py:1773
1265msgid "Ignoring changes to deleted member: %(user)s"
1266msgstr "�� ������� ��� ����������� ����� �� ���������: %(user)s"
1267
1268#: Mailman/Cgi/admin.py:1813
1269msgid "Successfully Removed:"
1270msgstr "� �������� ����� �� ��������:"
1271
1272#: Mailman/Cgi/admin.py:1817
1273msgid "Error Unsubscribing:"
1274msgstr "����� ��� ��������:"
1275
1276#: Mailman/Cgi/admindb.py:235 Mailman/Cgi/admindb.py:248
1277msgid "%(realname)s Administrative Database"
1278msgstr "������������� ���� ��� %(realname)s"
1279
1280#: Mailman/Cgi/admindb.py:238
1281msgid "%(realname)s Administrative Database Results"
1282msgstr "������������ ��� �� ������������� ���� ��� %(realname)s"
1283
1284#: Mailman/Cgi/admindb.py:251
1285msgid "There are no pending requests."
1286msgstr "��� �������� ������� ��������."
1287
1288#: Mailman/Cgi/admindb.py:254
1289msgid "Click here to reload this page."
1290msgstr "����� click ��� ��� �� ������������ ���� � ������."
1291
1292#: Mailman/Cgi/admindb.py:269
1293msgid "Detailed instructions for the administrative database"
1294msgstr "���������� ������� ��� �� ������������� ����"
1295
1296#: Mailman/Cgi/admindb.py:273
1297msgid "Administrative requests for mailing list:"
1298msgstr "������������� �������� ��� �� ����� ������������ ������������:"
1299
1300#: Mailman/Cgi/admindb.py:276 Mailman/Cgi/admindb.py:336
1301msgid "Submit All Data"
1302msgstr "�������� ���� ��� ���������"
1303
1304#: Mailman/Cgi/admindb.py:283 Mailman/Cgi/admindb.py:333
1305msgid "Discard all messages marked <em>Defer</em>"
1306msgstr ""
1307"�������� ����� ��������� ���� ��� �����������  ��������� ��  <em>\"����� "
1308"��������\"</em>"
1309
1310#: Mailman/Cgi/admindb.py:298
1311msgid "all of %(esender)s's held messages."
1312msgstr "��� �� �������� ��� %(esender)s ��� ����������."
1313
1314#: Mailman/Cgi/admindb.py:303
1315msgid "a single held message."
1316msgstr "���� ��� ������ ���������."
1317
1318#: Mailman/Cgi/admindb.py:308
1319msgid "all held messages."
1320msgstr "��� �� �������� ��� ����������."
1321
1322#: Mailman/Cgi/admindb.py:356
1323msgid "Mailman Administrative Database Error"
1324msgstr "����� ��� ������������� ���� ��� Mailman"
1325
1326#: Mailman/Cgi/admindb.py:361
1327msgid "list of available mailing lists."
1328msgstr "����� �� ���� ��� ���������� ������ ������������ ������������."
1329
1330#: Mailman/Cgi/admindb.py:362
1331msgid "You must specify a list name.  Here is the %(link)s"
1332msgstr "������ �� ������� ��� ����� ������. ���� ����� �� %(link)s"
1333
1334#: Mailman/Cgi/admindb.py:375
1335msgid "Subscription Requests"
1336msgstr "�������� ��������"
1337
1338#: Mailman/Cgi/admindb.py:377
1339msgid "Address/name/time"
1340msgstr "���������/�����/������"
1341
1342#: Mailman/Cgi/admindb.py:378 Mailman/Cgi/admindb.py:435
1343msgid "Your decision"
1344msgstr "� ������� ���"
1345
1346#: Mailman/Cgi/admindb.py:379 Mailman/Cgi/admindb.py:436
1347msgid "Reason for refusal"
1348msgstr "����� ���������"
1349
1350#: Mailman/Cgi/admindb.py:399 Mailman/Cgi/admindb.py:463
1351#: Mailman/Cgi/admindb.py:760 Mailman/Commands/cmd_confirm.py:90
1352msgid "Approve"
1353msgstr "����������"
1354
1355#: Mailman/Cgi/admindb.py:410
1356msgid "Permanently ban from this list"
1357msgstr "������� ����������� ��� �� �����"
1358
1359#: Mailman/Cgi/admindb.py:434
1360msgid "User address/name"
1361msgstr "���������/����� ������"
1362
1363#: Mailman/Cgi/admindb.py:475
1364msgid "Unsubscription Requests"
1365msgstr "�������� ���������"
1366
1367#: Mailman/Cgi/admindb.py:487
1368msgid "Held Messages"
1369msgstr "�������� ��� ����������."
1370
1371#: Mailman/Cgi/admindb.py:490
1372msgid "Show this list grouped/sorted by"
1373msgstr ""
1374
1375#: Mailman/Cgi/admindb.py:493
1376msgid "sender/sender"
1377msgstr ""
1378
1379#: Mailman/Cgi/admindb.py:493
1380msgid "sender/time"
1381msgstr ""
1382
1383#: Mailman/Cgi/admindb.py:493
1384msgid "ungrouped/time"
1385msgstr ""
1386
1387#: Mailman/Cgi/admindb.py:509 Mailman/Cgi/admindb.py:747
1388msgid "From:"
1389msgstr "���:"
1390
1391#: Mailman/Cgi/admindb.py:512
1392msgid "Action to take on all these held messages:"
1393msgstr "�������� ��� �� ���������� �� ��� ���� �� ��������� ��������:"
1394
1395#: Mailman/Cgi/admindb.py:525
1396msgid "Preserve messages for the site administrator"
1397msgstr "��������� ��������� ��� �� ����������� ��� ��������� �����"
1398
1399#: Mailman/Cgi/admindb.py:533
1400msgid "Forward messages (individually) to:"
1401msgstr "�������� ��������� (���������) ����:"
1402
1403#: Mailman/Cgi/admindb.py:553
1404msgid "Clear this member's <em>moderate</em> flag"
1405msgstr "���������� ��� <em>moderate</em> ���������� ����� ��� ������"
1406
1407#: Mailman/Cgi/admindb.py:558
1408msgid "<em>The sender is now a member of this list</em>"
1409msgstr "<em>� ���������� ����� ���� ����� ����� ��� ������</em>"
1410
1411#: Mailman/Cgi/admindb.py:568
1412msgid "Add <b>%(esender)s</b> to one of these sender filters:"
1413msgstr ""
1414"�������� <b>%(esender)s</b> �� ��� ��� ���� �� ������ ��� ���� ����������:"
1415
1416#: Mailman/Cgi/admindb.py:574
1417msgid "Accepts"
1418msgstr "��������"
1419
1420#: Mailman/Cgi/admindb.py:574
1421msgid "Discards"
1422msgstr "���������� ����� ����������"
1423
1424#: Mailman/Cgi/admindb.py:574
1425msgid "Holds"
1426msgstr "���������"
1427
1428#: Mailman/Cgi/admindb.py:574
1429msgid "Rejects"
1430msgstr "����������"
1431
1432#: Mailman/Cgi/admindb.py:584
1433msgid ""
1434"Ban <b>%(esender)s</b> from ever subscribing to this\n"
1435"                    mailing list"
1436msgstr ""
1437"���������� <b>%(esender)s</b> ��� ��� ������� ��� �� ���� ��\n"
1438"                    ����� ��� �����"
1439
1440#: Mailman/Cgi/admindb.py:589
1441msgid ""
1442"Click on the message number to view the individual\n"
1443"            message, or you can "
1444msgstr ""
1445"����� click ���� ������ ��� ��������� ��� �� ����� �� ����\n"
1446"            ������, � �������� "
1447
1448#: Mailman/Cgi/admindb.py:591
1449msgid "view all messages from %(esender)s"
1450msgstr "�� ����� ��� �� �������� ��� ��� %(esender)s"
1451
1452#: Mailman/Cgi/admindb.py:613 Mailman/Cgi/admindb.py:750
1453msgid "Subject:"
1454msgstr "����:"
1455
1456#: Mailman/Cgi/admindb.py:616
1457msgid " bytes"
1458msgstr " bytes"
1459
1460#: Mailman/Cgi/admindb.py:616
1461msgid "Size:"
1462msgstr "�������:"
1463
1464#: Mailman/Cgi/admindb.py:620 Mailman/Handlers/Scrubber.py:206
1465#: Mailman/Handlers/Scrubber.py:304 Mailman/Handlers/Scrubber.py:306
1466msgid "not available"
1467msgstr "��� ����� ���������"
1468
1469#: Mailman/Cgi/admindb.py:621 Mailman/Cgi/admindb.py:753
1470msgid "Reason:"
1471msgstr "�����:"
1472
1473#: Mailman/Cgi/admindb.py:625 Mailman/Cgi/admindb.py:757
1474msgid "Received:"
1475msgstr "���������:"
1476
1477#: Mailman/Cgi/admindb.py:681
1478msgid "Posting Held for Approval"
1479msgstr "�� ������ ��������� ���� �������"
1480
1481#: Mailman/Cgi/admindb.py:683
1482msgid " (%(count)d of %(total)d)"
1483msgstr " (%(count)d ��� %(total)d)"
1484
1485#: Mailman/Cgi/admindb.py:694
1486msgid "<em>Message with id #%(id)d was lost."
1487msgstr "<em>�� ������ �� �� �������������� ����� #%(id)d ������."
1488
1489#: Mailman/Cgi/admindb.py:703
1490msgid "<em>Message with id #%(id)d is corrupted."
1491msgstr "<em>�� ������ �� �� �������������� ����� #%(id)d ����� �������������."
1492
1493#: Mailman/Cgi/admindb.py:769
1494msgid "Preserve message for site administrator"
1495msgstr "��������� ��������� ��� �� ����������� ��� ��������� �����"
1496
1497#: Mailman/Cgi/admindb.py:775
1498msgid "Additionally, forward this message to: "
1499msgstr "�����������, �������� �� ������ ���: "
1500
1501#: Mailman/Cgi/admindb.py:780 Mailman/Cgi/admindb.py:849
1502#: Mailman/Cgi/admindb.py:926 Mailman/Cgi/admindb.py:928
1503msgid "[No explanation given]"
1504msgstr "[�� ������� �������]"
1505
1506#: Mailman/Cgi/admindb.py:782
1507msgid "If you reject this post,<br>please explain (optional):"
1508msgstr "�� ���������� ���� �� ������,<br>�������� �������� (�����������):"
1509
1510#: Mailman/Cgi/admindb.py:788
1511msgid "Message Headers:"
1512msgstr "������������ ��� ���������"
1513
1514#: Mailman/Cgi/admindb.py:793
1515msgid "Message Excerpt:"
1516msgstr "��������� ���������"
1517
1518#: Mailman/Cgi/admindb.py:965
1519msgid "Database Updated..."
1520msgstr "� ���� ����������"
1521
1522#: Mailman/Cgi/admindb.py:969
1523msgid " is already a member"
1524msgstr " ����� ��� �����"
1525
1526#: Mailman/Cgi/admindb.py:973
1527msgid "%(addr)s is banned (matched: %(patt)s)"
1528msgstr "%(addr)s ������������ (���������: %(patt)s)"
1529
1530#: Mailman/Cgi/confirm.py:88
1531msgid "Confirmation string was empty."
1532msgstr "� ��������� ���������� ������������ ����� ����."
1533
1534#: Mailman/Cgi/confirm.py:108
1535#, fuzzy
1536msgid ""
1537"<b>Invalid confirmation string:</b>\n"
1538"    %(safecookie)s.\n"
1539"\n"
1540"    <p>Note that confirmation strings expire approximately\n"
1541"    %(days)s days after the initial request.  They also expire if the\n"
1542"    request has already been handled in some way.  If your confirmation\n"
1543"    has expired, please try to re-submit your request.\n"
1544"    Otherwise, <a href=\"%(confirmurl)s\">re-enter</a> your confirmation\n"
1545"    string."
1546msgstr ""
1547"<b>� ��������� ���������� ������������ ��� ����� ������:</b>\n"
1548"    %(safecookie)s.\n"
1549"\n"
1550"    <p>��������� ��� �� ���������� ������������ ������ �� �������\n"
1551"    %(days)s ����� ���� �� ������ ������ ��������.  �� �\n"
1552"    ��������� ������������ ���� �����, �������� ������������ �� ���������� "
1553"�������.\n"
1554"    �����������, <a href=\"%(confirmurl)s\">����-��������</a> ��� ���������\n"
1555" ������������."
1556
1557#: Mailman/Cgi/confirm.py:142
1558msgid ""
1559"The address requesting unsubscription is not\n"
1560"                a member of the mailing list.  Perhaps you have already "
1561"been\n"
1562"                unsubscribed, e.g. by the list administrator?"
1563msgstr ""
1564"� ��������� ��� ��� ����� �������� �������� ��� ����� �����\n"
1565"                ��� ������. ���� ����� ��� ���������, �.�. ��� ���\n"
1566"                ����������� ��� ������;"
1567
1568#: Mailman/Cgi/confirm.py:158
1569msgid ""
1570"The address requesting to be changed has\n"
1571"                    been subsequently unsubscribed.  This request has been\n"
1572"                    cancelled."
1573msgstr ""
1574"� ��������� ��� ��� ����� �������� ������ ����\n"
1575"                    ���������. �� ������ ��� ����������."
1576
1577#: Mailman/Cgi/confirm.py:178
1578msgid "System error, bad content: %(content)s"
1579msgstr "����� ����������, ���� �����������: %(content)s"
1580
1581#: Mailman/Cgi/confirm.py:188
1582msgid "Bad confirmation string"
1583msgstr "�� ������ ���������� ������������"
1584
1585#: Mailman/Cgi/confirm.py:207
1586msgid "Enter confirmation cookie"
1587msgstr "�������� �� cookie ������������"
1588
1589#: Mailman/Cgi/confirm.py:220
1590msgid ""
1591"Please enter the confirmation string\n"
1592"    (i.e. <em>cookie</em>) that you received in your email message, in the "
1593"box\n"
1594"    below.  Then hit the <em>Submit</em> button to proceed to the next\n"
1595"    confirmation step."
1596msgstr ""
1597"�������� �������� ��� ��������� ���������� ������������\n"
1598"    (�.�. <em>cookie</em>) ��� ������ ��� email ���, ��� ��������\n"
1599"    �����.  ���� ������� �� ������ <em>��������</em> ��� �� ���������� ��� "
1600"�������\n"
1601"    ���� ������������."
1602
1603#: Mailman/Cgi/confirm.py:225
1604msgid "Confirmation string:"
1605msgstr "��������� ���������� ������������:"
1606
1607#: Mailman/Cgi/confirm.py:227
1608msgid "Submit"
1609msgstr "��������"
1610
1611#: Mailman/Cgi/confirm.py:244
1612msgid "Confirm subscription request"
1613msgstr "����������� ��� ��������� ��������"
1614
1615#: Mailman/Cgi/confirm.py:259
1616msgid ""
1617"Your confirmation is required in order to complete the\n"
1618"    subscription request to the mailing list <em>%(listname)s</em>.  Your\n"
1619"    subscription settings are shown below; make any necessary changes and "
1620"hit\n"
1621"    <em>Subscribe</em> to complete the confirmation process.  Once you've\n"
1622"    confirmed your subscription request, you will be shown your account\n"
1623"    options page which you can use to further customize your membership\n"
1624"    options.\n"
1625"\n"
1626"    <p>Note: your password will be emailed to you once your subscription is\n"
1627"    confirmed.  You can change it by visiting your personal options page.\n"
1628"\n"
1629"    <p>Or hit <em>Cancel my subscription request</em> if you no longer want "
1630"to\n"
1631"    subscribe to this list."
1632msgstr ""
1633"� ����������� ��� ���������� ����������� �� ����������� �� ������\n"
1634"    �������� ��� ����� ������������ ������������ <em>%(listname)s</em>.  �� "
1635"���������\n"
1636"    �������� ��������� ��������. ����� ���� ������� ������� ����������� ��� "
1637"��������\n"
1638"    <em>�������</em> ��� ��� ���������� ��� ����������� ������������.  ���� "
1639"�����\n"
1640"    ������������ �� ������ ��������, �� ����� �� ������ �� ��� �������� ��� "
1641"��\n"
1642"    ���������� ���. �������� �� ��� ��������������� ��� �� ������ ��\n"
1643"    ����������� ����������� ��� ���������� ��� ���������.\n"
1644"\n"
1645"    <p>��������: � ������� ��� �� ��� ������ �� email ���� ����� � "
1646"����������� ���\n"
1647"     ��������.  �������� �� ��� �������� ���� ��� �� ������ ��� ���������� "
1648"��� ���������.\n"
1649"\n"
1650"    <p>� �������� <em>������� ��� ��������� ��������</em> �� ��� ���������� "
1651"�����\n"
1652"    �� ���������� ��� �����."
1653
1654#: Mailman/Cgi/confirm.py:275
1655msgid ""
1656"Your confirmation is required in order to continue with\n"
1657"        the subscription request to the mailing list <em>%(listname)s</em>.\n"
1658"        Your subscription settings are shown below; make any necessary "
1659"changes\n"
1660"        and hit <em>Subscribe to list ...</em> to complete the confirmation\n"
1661"        process.  Once you've confirmed your subscription request, the\n"
1662"        moderator must approve or reject your membership request.  You will\n"
1663"        receive notice of their decision.\n"
1664"\n"
1665"        <p>Note: your password will be emailed to you once your "
1666"subscription\n"
1667"        is confirmed.  You can change it by visiting your personal options\n"
1668"        page.\n"
1669"\n"
1670"        <p>Or, if you've changed your mind and do not want to subscribe to\n"
1671"        this mailing list, you can hit <em>Cancel my subscription\n"
1672"        request</em>."
1673msgstr ""
1674"���������� � ����������� ��� ����������� �� ����������� �� ������\n"
1675"        ���������� ���� �� ����� ������������ ������������ <em>%(listname)s</"
1676"em>.\n"
1677"        �� ��������� ��� �������� ��� ��������� ��������. ����� ���� "
1678"�������\n"
1679"        ���������� ��� ������� <em>������� ��� ����� ...</em> ��� �� "
1680"����������� � ����������\n"
1681"        ������������.  ���� ������������� �� ������ ��������, � "
1682"��������������\n"
1683"        ������ �� �������� � �� ��������� �� ������ ���������� ��� �����. �� "
1684"������ ����������\n"
1685"        ��� ��� ������� ���.\n"
1686"\n"
1687"        <p>��������: � ������� ��� �� ��� ������ �� email ����� � ������� "
1688"���\n"
1689"        ������������.  �������� �� ��� �������� ���� ��� �� ������ ��� "
1690"���������� ��� ���������.\n"
1691"\n"
1692"        <p>�, �� ����� ������� ����� ��� ��� ������ �� ���������� �� ���� �� "
1693"�����,\n"
1694"        �������� �� �������� <em>������� ��� ��������� ��������</em>."
1695
1696#: Mailman/Cgi/confirm.py:293
1697msgid "Your email address:"
1698msgstr "� email ��������� ���:"
1699
1700#: Mailman/Cgi/confirm.py:294
1701msgid "Your real name:"
1702msgstr "�� ���������� ��� �����:"
1703
1704#: Mailman/Cgi/confirm.py:303
1705msgid "Receive digests?"
1706msgstr "�� ��������� ������������� �� �������� ��� ������;"
1707
1708#: Mailman/Cgi/confirm.py:312
1709msgid "Preferred language:"
1710msgstr "����������� ������:"
1711
1712#: Mailman/Cgi/confirm.py:317
1713msgid "Subscribe to list %(listname)s"
1714msgstr "������� ��� ����� %(listname)s"
1715
1716#: Mailman/Cgi/confirm.py:318
1717msgid "Cancel my subscription request"
1718msgstr "������� ��� ��������� ��������"
1719
1720#: Mailman/Cgi/confirm.py:341
1721msgid "You have canceled your subscription request."
1722msgstr "����� �������� �� ������ ��� ��� �������."
1723
1724#: Mailman/Cgi/confirm.py:383
1725msgid "Awaiting moderator approval"
1726msgstr "��' ������� ��� �������� ��� �����������"
1727
1728#: Mailman/Cgi/confirm.py:386
1729msgid ""
1730"            You have successfully confirmed your subscription request to "
1731"the\n"
1732"            mailing list %(listname)s, however final approval is required "
1733"from\n"
1734"            the list moderator before you will be subscribed.  Your request\n"
1735"            has been forwarded to the list moderator, and you will be "
1736"notified\n"
1737"            of the moderator's decision."
1738msgstr ""
1739"            ����� ������������ �� �������� �� ������ �������� ��� ����� "
1740"������������\n"
1741"            ������������ %(listname)s, ������ � ������ ������� ��� "
1742"������������� ��� ������\n"
1743"            ���� ����� ���������� ����� ����������.  �� ������ ��� ���� "
1744"���������\n"
1745"            ��� ������������� ��� ������, ��� �� ������������� ��� ��� "
1746"������� ���."
1747
1748#: Mailman/Cgi/confirm.py:393 Mailman/Cgi/confirm.py:459
1749#: Mailman/Cgi/confirm.py:549 Mailman/Cgi/confirm.py:788
1750msgid ""
1751"Invalid confirmation string.  It is\n"
1752"            possible that you are attempting to confirm a request for an\n"
1753"            address that has already been unsubscribed."
1754msgstr ""
1755"� ��������� ���������� ������������ ��� ����� ������.  ����� ������\n"
1756"            �� ����������� �� ������������� ��� ������ ��� ������ ���������\n"
1757"            � ����� ���� ��� ��������� ��� �� �����."
1758
1759#: Mailman/Cgi/confirm.py:397
1760msgid "You are already a member of this mailing list!"
1761msgstr "����� ��� ����� ����� ��� ������ ������������ ������������!"
1762
1763#: Mailman/Cgi/confirm.py:400
1764msgid ""
1765"You are currently banned from subscribing to\n"
1766"            this list.  If you think this restriction is erroneous, please\n"
1767"            contact the list owners at %(owneraddr)s."
1768msgstr ""
1769"� ��������� ������������ ������������ ��� ������ ����� ������������ ��\n"
1770"        ���� �� ����� ������������ ������������.  �� �������� ��� ����� �\n"
1771"        ����������� ����� ����������, ����������� ������������� �� ����\n"
1772"        ���������� ��� ������ ��� %(owneraddr)s."
1773
1774#: Mailman/Cgi/confirm.py:404
1775msgid ""
1776"            You were not invited to this mailing list.  The invitation has\n"
1777"            been discarded, and both list administrators have been\n"
1778"            alerted."
1779msgstr ""
1780"     ��� ����� ������ �� ����������� �� ���� �� �����.  � ��������� ����\n"
1781"            ���������� ����� ���������, ��� �� ������������ ��� ������ "
1782"�����\n"
1783" \t\t\t �����������."
1784
1785#: Mailman/Cgi/confirm.py:414
1786msgid "Subscription request confirmed"
1787msgstr "�� ������ �������� �������������"
1788
1789#: Mailman/Cgi/confirm.py:418
1790msgid ""
1791"            You have successfully confirmed your subscription request for\n"
1792"            \"%(addr)s\" to the %(listname)s mailing list.  A separate\n"
1793"            confirmation message will be sent to your email address, along\n"
1794"            with your password, and other useful information and links.\n"
1795"\n"
1796"            <p>You can now\n"
1797"            <a href=\"%(optionsurl)s\">proceed to your membership login\n"
1798"            page</a>."
1799msgstr ""
1800"     ����� ������������ �� ������ �������� ��� ��� �� ��������� \n"
1801"            \"%(addr)s\" ��� ����� ������������ ������������ %(listname)s.\n"
1802"            ��� ��������� ������ ������������ �� ������ ���� email ��������� "
1803"���, ���� ��\n"
1804"            ��� ������ ���, ���������� ��� ����� �������� �����������.\n"
1805"\n"
1806"            <p>�������� ���� <a href=\"%(optionsurl)s\"> �� ���������� ���� "
1807"��������� ��� ������</a>."
1808
1809#: Mailman/Cgi/confirm.py:436
1810msgid "You have canceled your unsubscription request."
1811msgstr "����� �������� �� ������ ��� ��� �������."
1812
1813#: Mailman/Cgi/confirm.py:465
1814msgid "Unsubscription request confirmed"
1815msgstr "������������� �� ������ ���������"
1816
1817#: Mailman/Cgi/confirm.py:469
1818msgid ""
1819"            You have successfully unsubscribed from the %(listname)s "
1820"mailing\n"
1821"            list.  You can now <a href=\"%(listinfourl)s\">visit the list's "
1822"main\n"
1823"            information page</a>."
1824msgstr ""
1825"     ����� ��������� �� �������� ��� �� ����� ������������ ������������ "
1826"%(listname)s.\n"
1827"            �������� ���� �� ������������ ��� �������� ������ ����������� "
1828"���\n"
1829"            ������ <a href=\"%(listinfourl)s\"></a>."
1830
1831#: Mailman/Cgi/confirm.py:480
1832msgid "Confirm unsubscription request"
1833msgstr "����������� ��������� ���������"
1834
1835#: Mailman/Cgi/confirm.py:495 Mailman/Cgi/confirm.py:598
1836msgid "<em>Not available</em>"
1837msgstr "<em>��� ����� ���������</em>"
1838
1839#: Mailman/Cgi/confirm.py:498
1840msgid ""
1841"Your confirmation is required in order to complete the\n"
1842"    unsubscription request from the mailing list <em>%(listname)s</em>.  "
1843"You\n"
1844"    are currently subscribed with\n"
1845"\n"
1846"    <ul><li><b>Real name:</b> %(fullname)s\n"
1847"        <li><b>Email address:</b> %(addr)s\n"
1848"    </ul>\n"
1849"\n"
1850"    Hit the <em>Unsubscribe</em> button below to complete the confirmation\n"
1851"    process.\n"
1852"\n"
1853"    <p>Or hit <em>Cancel and discard</em> to cancel this unsubscription\n"
1854"    request."
1855msgstr ""
1856"���������� � ����������� ��� ����������� �� ����������� ��\n"
1857"    ������ ��������� ��� �� ����� ������������ ������������ <em>"
1858"%(listname)s</em>.\n"
1859"    ���� �� ������ ����� ������������� ��\n"
1860"\n"
1861"    <ul><li><b>���������� �����:</b> %(fullname)s\n"
1862"        <li><b>Email ���������:</b> %(addr)s\n"
1863"    </ul>\n"
1864"\n"
1865"    ������� �� ������ <em>��������</em> �������� ��� ��� ���������� ��� "
1866"�����������\n"
1867"    ������������.\n"
1868"\n"
1869"    <p>� ������� <em>������� ��� �������� ����� ���������</em> ��� ��� "
1870"������� ��� ���������\n"
1871"     ��������."
1872
1873#: Mailman/Cgi/confirm.py:514 Mailman/Cgi/options.py:863
1874#: Mailman/Cgi/options.py:1010 Mailman/Cgi/options.py:1020
1875msgid "Unsubscribe"
1876msgstr "��������"
1877
1878#: Mailman/Cgi/confirm.py:515 Mailman/Cgi/confirm.py:627
1879msgid "Cancel and discard"
1880msgstr "������� ��� �������� ����� ���������"
1881
1882#: Mailman/Cgi/confirm.py:525
1883msgid "You have canceled your change of address request."
1884msgstr "��������� �� ������ ��� ������ ����������."
1885
1886#: Mailman/Cgi/confirm.py:555
1887msgid ""
1888"%(newaddr)s is banned from subscribing to the\n"
1889"            %(realname)s list.  If you think this restriction is erroneous,\n"
1890"            please contact the list owners at %(owneraddr)s."
1891msgstr ""
1892"� %(newaddr)s ������������ �� �������� ���\n"
1893"        ����� %(realname)s.  �� �������� ��� ����� �\n"
1894"        ����������� ����� ����������, ����������� ������������� �� ����\n"
1895"        ���������� ��� ������ ��� %(owneraddr)s."
1896
1897#: Mailman/Cgi/confirm.py:560
1898msgid ""
1899"%(newaddr)s is already a member of\n"
1900"            the %(realname)s list.  It is possible that you are attempting\n"
1901"            to confirm a request for an address that has already been\n"
1902"            subscribed."
1903msgstr ""
1904"%(newaddr)s ����� ��� ��� ������ ����� \n"
1905"            ��� ������ %(realname)s. ����� ������ �� ����������� �� "
1906"������������� ��� ������ ��� ������ ���������\n"
1907"            � ����� ���� ��� �������� ��� �����."
1908
1909#: Mailman/Cgi/confirm.py:567
1910msgid "Change of address request confirmed"
1911msgstr "�� ������ ��� ������ ���������� �������������"
1912
1913#: Mailman/Cgi/confirm.py:571
1914msgid ""
1915"            You have successfully changed your address on the %(listname)s\n"
1916"            mailing list from <b>%(oldaddr)s</b> to <b>%(newaddr)s</b>.  "
1917"You\n"
1918"            can now <a href=\"%(optionsurl)s\">proceed to your membership\n"
1919"            login page</a>."
1920msgstr ""
1921"     �������� �� �������� �� ��������� ��� ��� %(listname)s\n"
1922"            ����� ��� <b>%(oldaddr)s</b> �� <b>%(newaddr)s</b>. ��������\n"
1923"            ���� �� <a href=\"%(optionsurl)s\">����������� ���� ���������\n"
1924"            ������ �������� ���</a>."
1925
1926#: Mailman/Cgi/confirm.py:583
1927msgid "Confirm change of address request"
1928msgstr "����������� ��� ��������� ������� ����������"
1929
1930#: Mailman/Cgi/confirm.py:602
1931msgid "globally"
1932msgstr "��������"
1933
1934#: Mailman/Cgi/confirm.py:605
1935msgid ""
1936"Your confirmation is required in order to complete the\n"
1937"    change of address request for the mailing list <em>%(listname)s</em>.  "
1938"You\n"
1939"    are currently subscribed with\n"
1940"\n"
1941"    <ul><li><b>Real name:</b> %(fullname)s\n"
1942"        <li><b>Old email address:</b> %(oldaddr)s\n"
1943"    </ul>\n"
1944"\n"
1945"    and you have requested to %(globallys)s change your email address to\n"
1946"\n"
1947"    <ul><li><b>New email address:</b> %(newaddr)s\n"
1948"    </ul>\n"
1949"\n"
1950"    Hit the <em>Change address</em> button below to complete the "
1951"confirmation\n"
1952"    process.\n"
1953"\n"
1954"    <p>Or hit <em>Cancel and discard</em> to cancel this change of address\n"
1955"    request."
1956msgstr ""
1957"� ����������� ��� ���������� ����������� �� ����������� �� ������\n"
1958"    ��� ������ ���������� ��� �� ����� ������������ ������������ <em>"
1959"%(listname)s</em>.\n"
1960"    ���� �� ������ ����� ������������� ��\n"
1961"\n"
1962"    <ul><li><b>���������� �����:</b> %(fullname)s\n"
1963"        <li><b>����� ����������� ���������:</b> %(oldaddr)s\n"
1964"    </ul>\n"
1965"\n"
1966"    ��� ����� ������� �� ����� %(globallys)s ������ ���� email ��������� ��\n"
1967"\n"
1968"    <ul><li><b>��� ����������� ���������:</b> %(newaddr)s\n"
1969"    </ul>\n"
1970"\n"
1971"    ������� �� ������ <em>������ ����������</em> �������� ��� �� ����������� "
1972"�\n"
1973"    ���������� ������������.\n"
1974"\n"
1975"    <p>� ������� <em>������� ��� �������� ����� ���������</em> ��� ��� "
1976"������� ��� ���������\n"
1977"    ������� ����������."
1978
1979# Mailman/Cgi/confirm.py:59$
1980#: Mailman/Cgi/confirm.py:626
1981msgid "Change address"
1982msgstr "������ ����������"
1983
1984#: Mailman/Cgi/confirm.py:635 Mailman/Cgi/confirm.py:752
1985msgid "Continue awaiting approval"
1986msgstr "�������� �������� ��������"
1987
1988#: Mailman/Cgi/confirm.py:643
1989msgid ""
1990"Okay, the list moderator will still have the\n"
1991"    opportunity to approve or reject this message."
1992msgstr ""
1993"�������, � �������������� ��� ������ �� ������������� �� ���� ��\n"
1994"    ���������� �� �������� � �� ��������� ���� �� ������."
1995
1996#: Mailman/Cgi/confirm.py:671
1997msgid "Sender discarded message via web."
1998msgstr "� ���������� �������� ����� ��������� �� ������ ���� ��� web."
1999
2000#: Mailman/Cgi/confirm.py:674
2001msgid ""
2002"The held message with the Subject:\n"
2003"            header <em>%(subject)s</em> could not be found.  The most "
2004"likely\n"
2005"            reason for this is that the list moderator has already approved "
2006"or\n"
2007"            rejected the message.  You were not able to cancel it in\n"
2008"            time."
2009msgstr ""
2010"�� ������ ��� ��������� �� ����:\n"
2011"            ����������� <em>%(subject)s</em> ��� ���� ������. � ��� ������� "
2012"�����\n"
2013"            ��� ���� ����� ��� � ������������ ��� ������ ���� ��� �������� "
2014"�\n"
2015"            ��������� �� ������. �� ��������� �� �� ��������� ��������."
2016
2017#: Mailman/Cgi/confirm.py:682
2018msgid "Posted message canceled"
2019msgstr "�� ������ ��� �������� ���������"
2020
2021#: Mailman/Cgi/confirm.py:685
2022msgid ""
2023"            You have successfully canceled the posting of your message with\n"
2024"            the Subject: header <em>%(subject)s</em> to the mailing list\n"
2025"            %(listname)s."
2026msgstr ""
2027"     ��������� �� �������� �� ������ ��� �������� ��\n"
2028"            ����: ����������� <em>%(subject)s</em> ��� ����� ������������ "
2029"������������\n"
2030"            %(listname)s."
2031
2032#: Mailman/Cgi/confirm.py:696
2033msgid "Cancel held message posting"
2034msgstr "������� ��������� ���������� ���������"
2035
2036#: Mailman/Cgi/confirm.py:721
2037msgid ""
2038"The held message you were referred to has\n"
2039"        already been handled by the list administrator."
2040msgstr ""
2041"�� ��������� ������ ��� ����� ���������� ���� ��� ������������\n"
2042"        ��� �� ����������� ��� ������."
2043
2044#: Mailman/Cgi/confirm.py:735
2045msgid ""
2046"Your confirmation is required in order to cancel the\n"
2047"    posting of your message to the mailing list <em>%(listname)s</em>:\n"
2048"\n"
2049"    <ul><li><b>Sender:</b> %(sender)s\n"
2050"        <li><b>Subject:</b> %(subject)s\n"
2051"        <li><b>Reason:</b> %(reason)s\n"
2052"    </ul>\n"
2053"\n"
2054"    Hit the <em>Cancel posting</em> button to discard the posting.\n"
2055"\n"
2056"    <p>Or hit the <em>Continue awaiting approval</em> button to continue to\n"
2057"    allow the list moderator to approve or reject the message."
2058msgstr ""
2059"� ����������� ��� ���������� ��� �� �������� � ��������\n"
2060"    ��� ��������� ��� ����� <em>%(listname)s</em>:\n"
2061"\n"
2062"    <ul><li><b>����������:</b> %(sender)s\n"
2063"        <li><b>����:</b> %(subject)s\n"
2064"        <li><b>�����:</b> %(reason)s\n"
2065"    </ul>\n"
2066"\n"
2067"    �������� �� ������ <em>������� ���������</em> ��� ��� �������� ����� "
2068"��������� ��� ���������.\n"
2069"\n"
2070"    <p>� �������� �� ������ <em>�������� �������� ��������</em> ��� �� "
2071"���������� ���\n"
2072"    ����������� ��� ������ �� �������� � �� ��������� �� ������."
2073
2074#: Mailman/Cgi/confirm.py:751
2075msgid "Cancel posting"
2076msgstr "������� ���������"
2077
2078#: Mailman/Cgi/confirm.py:763
2079msgid ""
2080"You have canceled the re-enabling of your membership.  If\n"
2081"    we continue to receive bounces from your address, it could be deleted "
2082"from\n"
2083"    this mailing list."
2084msgstr ""
2085"����� �������� ��� �����-������������ ��� �������� ���.  ��\n"
2086"    ����������� �� ���������� bounce �������� ��� �� ��������� ���, ������ "
2087"�� ���������te ��� ���� �� �����."
2088
2089#: Mailman/Cgi/confirm.py:794
2090msgid "Membership re-enabled."
2091msgstr "� ������� �����-��������������."
2092
2093#: Mailman/Cgi/confirm.py:798
2094msgid ""
2095"            You have successfully re-enabled your membership in the\n"
2096"            %(listname)s mailing list.  You can now <a\n"
2097"            href=\"%(optionsurl)s\">visit your member options page</a>.\n"
2098"            "
2099msgstr ""
2100"     ����� �����-������������� �� �������� ��� ��������� ��� ��� ����� "
2101"%(listname)s.  �������� ���� \n"
2102"            <a href=\"%(optionsurl)s\">�� ������������ �� ������ ��� "
2103"���������� ��� ��������</a>.\n"
2104"            "
2105
2106#: Mailman/Cgi/confirm.py:810
2107msgid "Re-enable mailing list membership"
2108msgstr "�����-������������ ��� ���������� ��� �����"
2109
2110#: Mailman/Cgi/confirm.py:827
2111msgid ""
2112"We're sorry, but you have already been unsubscribed\n"
2113"        from this mailing list.  To re-subscribe, please visit the\n"
2114"        <a href=\"%(listinfourl)s\">list information page</a>."
2115msgstr ""
2116"����������, ���� ����� ��� ��������� ��� ���� ��\n"
2117"        �����.  ��� ��� ����������� ���, ����������� ������������ ��\n"
2118"        <a href=\"%(listinfourl)s\">������ �� ��� ����������� ��� �� �����</"
2119"a>."
2120
2121#: Mailman/Cgi/confirm.py:842
2122msgid "<em>not available</em>"
2123msgstr "<em>��� ����� ���������</em>"
2124
2125#: Mailman/Cgi/confirm.py:846
2126msgid ""
2127"Your membership in the %(realname)s mailing list is\n"
2128"    currently disabled due to excessive bounces.  Your confirmation is\n"
2129"    required in order to re-enable delivery to your address.  We have the\n"
2130"    following information on file:\n"
2131"\n"
2132"    <ul><li><b>Member address:</b> %(member)s\n"
2133"        <li><b>Member name:</b> %(username)s\n"
2134"        <li><b>Last bounce received on:</b> %(date)s\n"
2135"        <li><b>Approximate number of days before you are permanently "
2136"removed\n"
2137"               from this list:</b> %(daysleft)s\n"
2138"    </ul>\n"
2139"\n"
2140"    Hit the <em>Re-enable membership</em> button to resume receiving "
2141"postings\n"
2142"    from the mailing list.  Or hit the <em>Cancel</em> button to defer\n"
2143"    re-enabling your membership.\n"
2144"    "
2145msgstr ""
2146"� ��������� ��� ��� ����� %(realname)s ����� ����\n"
2147"    �� ������ ���������������� ���� ������� ������� bounce ���������.  � "
2148"����������� ���\n"
2149"    ���������� ����������� �� ������������� ��'���� � �������� ��������� ��� "
2150"��������� ���.\n"
2151"    ������ ��� �������� ���������� ��� �� ������:\n"
2152"\n"
2153"    <ul><li><b>��������� ������:</b> %(member)s\n"
2154"        <li><b>����� ������:</b> %(username)s\n"
2155"        <li><b>��������� bounce ������ ���:</b> %(date)s\n"
2156"        <li><b>�������������� ������� ������ ���� ��� �������� ��������\n"
2157"               ��� ��� �� �����:</b> %(daysleft)s\n"
2158"    </ul>\n"
2159"\n"
2160"    ������� �� ������ <em>�����-������������ ����������</em> ��� �� "
2161"��������� ��������\n"
2162"    ��� �� �����.  � ������� �� ������ <em>�������</em> ��� ��� ��������\n"
2163"    ��� �����-������������� ��� ���������� ���.\n"
2164"    "
2165
2166#: Mailman/Cgi/confirm.py:866
2167msgid "Re-enable membership"
2168msgstr "�����-������������ ����������"
2169
2170#: Mailman/Cgi/confirm.py:867
2171msgid "Cancel"
2172msgstr "�������"
2173
2174#: Mailman/Cgi/create.py:60 Mailman/Cgi/rmlist.py:59
2175msgid "Bad URL specification"
2176msgstr "����������� ������� ��������� �����"
2177
2178#: Mailman/Cgi/create.py:75 Mailman/Cgi/rmlist.py:196
2179msgid "Return to the "
2180msgstr "��������� ���� "
2181
2182#: Mailman/Cgi/create.py:77 Mailman/Cgi/rmlist.py:198
2183msgid "general list overview"
2184msgstr "������ ���������� ��� ������"
2185
2186#: Mailman/Cgi/create.py:78 Mailman/Cgi/rmlist.py:199
2187msgid "<br>Return to the "
2188msgstr "<br>�������� ��� "
2189
2190#: Mailman/Cgi/create.py:80 Mailman/Cgi/rmlist.py:201
2191msgid "administrative list overview"
2192msgstr "������������� ���������� ��� ������"
2193
2194#: Mailman/Cgi/create.py:115
2195msgid "List name must not include \"@\": %(safelistname)s"
2196msgstr "�� ����� ��� ������ �� ������ �� �������� \"@\": %(safelistname)s"
2197
2198#: Mailman/Cgi/create.py:122
2199msgid "List already exists: %(safelistname)s"
2200msgstr "� ����� ������� ���: %(safelistname)s"
2201
2202#: Mailman/Cgi/create.py:126
2203msgid "You forgot to enter the list name"
2204msgstr "�������� �� ������������ �� ����� ��� ������"
2205
2206#: Mailman/Cgi/create.py:130
2207msgid "You forgot to specify the list owner"
2208msgstr "�������� �� ������� ��� ��������� ��� ������"
2209
2210#: Mailman/Cgi/create.py:137
2211msgid ""
2212"Leave the initial password (and confirmation) fields\n"
2213"                blank if you want Mailman to autogenerate the list\n"
2214"                passwords."
2215msgstr ""
2216"������ ���� �� ����� �� ��� ������ ������ (��� ��� �����������)\n"
2217"                �� ������ � Mailman �� ������� �������� �o� ������."
2218
2219#: Mailman/Cgi/create.py:146
2220msgid "Initial list passwords do not match"
2221msgstr "�� ������� ������� ��� ������ ��� ����������"
2222
2223#: Mailman/Cgi/create.py:155
2224msgid "The list password cannot be empty<!-- ignore -->"
2225msgstr "� ������� ��� ������ �� ������ �� ����� �����<!-- �������� �� -->"
2226
2227#: Mailman/Cgi/create.py:174
2228msgid "You are not authorized to create new mailing lists"
2229msgstr ""
2230"��� ����� ��� ������������� �� ������������� ���� ������ ������������ "
2231"������������"
2232
2233#: Mailman/Cgi/create.py:182
2234msgid "Unknown virtual host: %(safehostname)s"
2235msgstr "�������� ��������� ������������: %(safehostname)s"
2236
2237#: Mailman/Cgi/create.py:218 bin/newlist:219
2238msgid "Bad owner email address: %(s)s"
2239msgstr "���� ����������� ��������� ���������: %(s)s"
2240
2241#: Mailman/Cgi/create.py:223 bin/newlist:182 bin/newlist:223
2242msgid "List already exists: %(listname)s"
2243msgstr "� ����� ������� ���: %(listname)s"
2244
2245#: Mailman/Cgi/create.py:231 bin/newlist:217
2246msgid "Illegal list name: %(s)s"
2247msgstr "�� ������ ����� ������: %(s)s"
2248
2249#: Mailman/Cgi/create.py:236
2250msgid ""
2251"Some unknown error occurred while creating the list.\n"
2252"                Please contact the site administrator for assistance."
2253msgstr ""
2254"������ ������� ����� ������� ���� �� ���������� ��� ������.\n"
2255"                ����������� ������������� �� �� ����������� ��� �������."
2256
2257#: Mailman/Cgi/create.py:273 bin/newlist:265
2258msgid "Your new mailing list: %(listname)s"
2259msgstr "� ��� ��� ����� ������������ ������������: %(listname)s"
2260
2261#: Mailman/Cgi/create.py:282
2262msgid "Mailing list creation results"
2263msgstr "������������ ����������� ������ ������������ ������������"
2264
2265#: Mailman/Cgi/create.py:288
2266msgid ""
2267"You have successfully created the mailing list\n"
2268"    <b>%(listname)s</b> and notification has been sent to the list owner\n"
2269"    <b>%(owner)s</b>.  You can now:"
2270msgstr ""
2271"����� ������������ �� �������� �� �����\n"
2272"    <b>%(listname)s</b> ��� ���� ������ ��� ���������� ���� ��������� ��� "
2273"������\n"
2274"    <b>%(owner)s</b>.  �������� ���� ��:"
2275
2276#: Mailman/Cgi/create.py:292
2277msgid "Visit the list's info page"
2278msgstr "������������ �� ������ �� ��� ����������� ��� �� �����"
2279
2280#: Mailman/Cgi/create.py:293
2281msgid "Visit the list's admin page"
2282msgstr "������������ �� ������ ����������� ��� ������"
2283
2284#: Mailman/Cgi/create.py:294
2285msgid "Create another list"
2286msgstr "������������� ���� �����"
2287
2288#: Mailman/Cgi/create.py:312
2289msgid "Create a %(hostname)s Mailing List"
2290msgstr "���������� ���� ������ ��� %(hostname)s"
2291
2292#: Mailman/Cgi/create.py:321 Mailman/Cgi/rmlist.py:219
2293#: Mailman/Gui/Bounce.py:196 Mailman/htmlformat.py:360
2294msgid "Error: "
2295msgstr "�����: "
2296
2297#: Mailman/Cgi/create.py:323
2298msgid ""
2299"You can create a new mailing list by entering the\n"
2300"    relevant information into the form below.  The name of the mailing list\n"
2301"    will be used as the primary address for posting messages to the list, "
2302"so\n"
2303"    it should be lowercased.  You will not be able to change this once the\n"
2304"    list is created.\n"
2305"\n"
2306"    <p>You also need to enter the email address of the initial list owner.\n"
2307"    Once the list is created, the list owner will be given notification, "
2308"along\n"
2309"    with the initial list password.  The list owner will then be able to\n"
2310"    modify the password and add or remove additional list owners.\n"
2311"\n"
2312"    <p>If you want Mailman to automatically generate the initial list admin\n"
2313"    password, click on `Yes' in the autogenerate field below, and leave the\n"
2314"    initial list password fields empty.\n"
2315"\n"
2316"    <p>You must have the proper authorization to create new mailing lists.\n"
2317"    Each site should have a <em>list creator's</em> password, which you can\n"
2318"    enter in the field at the bottom.  Note that the site administrator's\n"
2319"    password can also be used for authentication.\n"
2320"    "
2321msgstr ""
2322"�������� �� ������������� ��� ��� ����� ������������ ������������ "
2323"����������\n"
2324"    ��� �������� ����������� ���� �������� �����.  �� ����� ��� ������ �� "
2325"�����\n"
2326"    � ����� ��������� ��� ��� �������� ��������� ��� �����, ��������\n"
2327"    �� ������ �� ����������� �� ����� ��������.  ��� �� ��������� �� "
2328"�������� �� ����� ��� \n"
2329"    ���� �� ���������� ���.\n"
2330"\n"
2331"    <p>������ ������ �� �������� ��� ����������� ��������� ��� ������� "
2332"��������� ��� ������.\n"
2333"    ���� ������������ � �����, � ���������� ��� �� ����� ���������� ��� "
2334"����\n"
2335"    ��� ������ ������ ��� ������.  � ���������� ��� ������ �� ������ ���� "
2336"��\n"
2337"    ������� ��� ������ ��� �� ��������� � �� ��������� ���������� ��� �� "
2338"�����.\n"
2339"\n"
2340"    <p>�� ������ �� ������� � Mailman �������� ��� ������ ������ ��� "
2341"�����������\n"
2342"     ��� ������, ������� ��� `���' ��� ����� ��������� ��������� ��������, "
2343"��� ������\n"
2344"    ���� �� ����� ��� ��� ������ ������.\n"
2345"\n"
2346"    <p>������ �� ����� ��������� ������������� ��� �� ������������� ���� "
2347"������.\n"
2348"    ���� ��� ����� ������ �� ���� ��� ������ <em>���������� ������</em> ��� "
2349"����� ��������\n"
2350"    �� �������� ��� �������� �����.  ������ �� ��������� ��� � ������� ��� "
2351"�����������\n"
2352"    ��� ��������� ����� ������ ������ �� �������������� ��� �����������.\n"
2353"    "
2354
2355#: Mailman/Cgi/create.py:349
2356msgid "List Identity"
2357msgstr "��������� ������"
2358
2359#: Mailman/Cgi/create.py:354
2360msgid "Name of list:"
2361msgstr "����� ������:"
2362
2363#: Mailman/Cgi/create.py:361
2364msgid "Initial list owner address:"
2365msgstr "��������� ��� ������� ��������� ��� ������"
2366
2367#: Mailman/Cgi/create.py:370
2368msgid "Auto-generate initial list password?"
2369msgstr "�������� �������� ��� ������� ������� ��� ������;"
2370
2371#: Mailman/Cgi/create.py:378
2372msgid "Initial list password:"
2373msgstr "������� ������� ��� ������:"
2374
2375#: Mailman/Cgi/create.py:384
2376msgid "Confirm initial password:"
2377msgstr "����������� ��� ������� �������:"
2378
2379#: Mailman/Cgi/create.py:399
2380msgid "List Characteristics"
2381msgstr "�������������� ������"
2382
2383#: Mailman/Cgi/create.py:403
2384msgid ""
2385"Should new members be quarantined before they\n"
2386"    are allowed to post unmoderated to this list?  Answer <em>Yes</em> to "
2387"hold\n"
2388"    new member postings for moderator approval by default."
2389msgstr ""
2390"������ �� ��� ���� �� �������� �� '���������' ���� ���� ��������� ��\n"
2391"    �������� ����� ������ �� ���� �� �����;  �������� <em>���</em> �� \n"
2392"���������� �� �������� ��� ���� ����� ��� ������� ��� �� �����������  ��' "
2393"�������"
2394
2395#: Mailman/Cgi/create.py:432
2396msgid ""
2397"Initial list of supported languages.  <p>Note that if you do not\n"
2398"        select at least one initial language, the list will use the server\n"
2399"        default language of %(deflang)s"
2400msgstr ""
2401"������ ����� ��� ��������������� �������.  <p>��������� ��� �� ��� "
2402"���������\n"
2403"        ����������� ��� ������ ������, � ����� �� �������������� ��� "
2404"�������������� ������: %(deflang)s"
2405
2406#: Mailman/Cgi/create.py:443
2407msgid "Send \"list created\" email to list owner?"
2408msgstr "�������� ��������� \"���������� ������\" ���� ��������� ��� ������;"
2409
2410#: Mailman/Cgi/create.py:452
2411msgid "List creator's (authentication) password:"
2412msgstr "������� (���������) ���������� ������:"
2413
2414#: Mailman/Cgi/create.py:457
2415msgid "Create List"
2416msgstr "���������� ������"
2417
2418#: Mailman/Cgi/create.py:458
2419msgid "Clear Form"
2420msgstr "���������� ������"
2421
2422#: Mailman/Cgi/edithtml.py:48
2423msgid "General list information page"
2424msgstr "������ ������� ����������� ��� ������"
2425
2426#: Mailman/Cgi/edithtml.py:49
2427msgid "Subscribe results page"
2428msgstr "������ ������������� ��������"
2429
2430#: Mailman/Cgi/edithtml.py:50
2431msgid "User specific options page"
2432msgstr "������ �������� ������"
2433
2434#: Mailman/Cgi/edithtml.py:51
2435msgid "Welcome email text file"
2436msgstr "������ �������� ��� ��������� ��������������"
2437
2438#: Mailman/Cgi/edithtml.py:52
2439#, fuzzy
2440msgid "Digest masthead"
2441msgstr "����������� �������"
2442
2443#: Mailman/Cgi/edithtml.py:53
2444msgid "User notice of held post"
2445msgstr ""
2446
2447#: Mailman/Cgi/edithtml.py:54
2448#, fuzzy
2449msgid "User notice of held subscription"
2450msgstr "������� ��� ��������� ���������� ���"
2451
2452#: Mailman/Cgi/edithtml.py:55
2453msgid "Notice of post refused by moderator"
2454msgstr ""
2455
2456#: Mailman/Cgi/edithtml.py:56
2457msgid "Invitation to join list"
2458msgstr ""
2459
2460#: Mailman/Cgi/edithtml.py:57
2461#, fuzzy
2462msgid "Request to confirm subscription"
2463msgstr "������� ��� ��������� ���������� ���"
2464
2465#: Mailman/Cgi/edithtml.py:58
2466#, fuzzy
2467msgid "Request to confirm unsubscription"
2468msgstr "����������� ��������� ���������"
2469
2470#: Mailman/Cgi/edithtml.py:59
2471msgid "User notice of autoresponse limit"
2472msgstr ""
2473
2474#: Mailman/Cgi/edithtml.py:60
2475#, fuzzy
2476msgid "User post acknowledgement"
2477msgstr "����������� ����� ��� ��������� ��� %(realname)s"
2478
2479#: Mailman/Cgi/edithtml.py:61
2480msgid "Subscription disabled by bounce warning"
2481msgstr ""
2482
2483#: Mailman/Cgi/edithtml.py:62
2484msgid "Admin/moderator login page"
2485msgstr ""
2486
2487#: Mailman/Cgi/edithtml.py:63
2488#, fuzzy
2489msgid "Private archive login page"
2490msgstr "����� ��� �������� �������� ������"
2491
2492#: Mailman/Cgi/edithtml.py:64
2493#, fuzzy
2494msgid "On demand password reminder"
2495msgstr "�� ������������� �������� ������������ ��� �������;"
2496
2497#: Mailman/Cgi/edithtml.py:76
2498msgid "List name is required."
2499msgstr "���������� �� ����� ��� ������."
2500
2501#: Mailman/Cgi/edithtml.py:154
2502msgid "%(realname)s -- Edit html for %(template_info)s"
2503msgstr "%(realname)s -- ����������� ��� html ��� %(template_info)s"
2504
2505#: Mailman/Cgi/edithtml.py:160
2506msgid "Edit HTML : Error"
2507msgstr "����������� HTML : �����"
2508
2509#: Mailman/Cgi/edithtml.py:161
2510msgid "%(safetemplatename)s: Invalid template"
2511msgstr "%(safetemplatename)s: �� ������ template"
2512
2513#: Mailman/Cgi/edithtml.py:166 Mailman/Cgi/edithtml.py:167
2514msgid "%(realname)s -- HTML Page Editing"
2515msgstr "%(realname)s -- ����������� HTML �������"
2516
2517#: Mailman/Cgi/edithtml.py:168
2518msgid "Select page to edit:"
2519msgstr "������� ������� ��� �����������:"
2520
2521#: Mailman/Cgi/edithtml.py:201
2522msgid "View or edit the list configuration information."
2523msgstr "���������� � ����������� ��� ����������� ��� �� ���������� ��� ������."
2524
2525#: Mailman/Cgi/edithtml.py:215
2526msgid "Edit this template for"
2527msgstr ""
2528
2529#: Mailman/Cgi/edithtml.py:225
2530msgid "When you are done making changes..."
2531msgstr "���� ���������� �� ��� �������..."
2532
2533#: Mailman/Cgi/edithtml.py:228
2534msgid "Submit Changes"
2535msgstr "�������� �������"
2536
2537#: Mailman/Cgi/edithtml.py:237
2538msgid "Can't have empty html page."
2539msgstr "�� ������ �� ������� ���� html ������."
2540
2541#: Mailman/Cgi/edithtml.py:238
2542msgid "HTML Unchanged."
2543msgstr "� HTML ��� ������."
2544
2545#: Mailman/Cgi/edithtml.py:244
2546msgid ""
2547"The page you saved contains suspicious HTML that could\n"
2548"potentially expose your users to cross-site scripting attacks.  This change\n"
2549"has therefore been rejected.  If you still want to make these changes, you\n"
2550"must have shell access to your Mailman server.\n"
2551"             "
2552msgstr ""
2553"� ������ ��� ����� ����������� �������� ������� HTML ��� �� ��������� �� \n"
2554"�������� ����������� ����� ������� ��� �� cross-site scripting ���������. "
2555"���� � ������ \n"
2556"�� �� ������, �����������. ��� ������������� �� ������ �� ������ ����� ��� "
2557"�������, ��\n"
2558"������ �� ����� �������� ��� ������� ���������� Mailman.\n"
2559"             "
2560
2561#: Mailman/Cgi/edithtml.py:249
2562msgid "See "
2563msgstr "���"
2564
2565#: Mailman/Cgi/edithtml.py:252
2566msgid "FAQ 4.48."
2567msgstr ""
2568
2569#: Mailman/Cgi/edithtml.py:253
2570msgid "Page Unchanged."
2571msgstr "� ��������� ������."
2572
2573#: Mailman/Cgi/edithtml.py:271
2574msgid "HTML successfully updated."
2575msgstr "� HTML ������ �� ��������."
2576
2577#: Mailman/Cgi/listinfo.py:89
2578msgid "%(hostname)s Mailing Lists"
2579msgstr "������ ������������ ������������ ��� %(hostname)s"
2580
2581#: Mailman/Cgi/listinfo.py:127
2582msgid ""
2583"<p>There currently are no publicly-advertised\n"
2584"            %(mailmanlink)s mailing lists on %(hostname)s."
2585msgstr ""
2586"<p>��� �������� ���� �� ������ ������� �������������\n"
2587"            %(mailmanlink)s ������ ������������ ������������ ��� "
2588"%(hostname)s."
2589
2590#: Mailman/Cgi/listinfo.py:131
2591msgid ""
2592"<p>Below is a listing of all the public mailing lists on\n"
2593"            %(hostname)s.  Click on a list name to get more information "
2594"about\n"
2595"            the list, or to subscribe, unsubscribe, and change the "
2596"preferences\n"
2597"            on your subscription."
2598msgstr ""
2599"<p>�������� ��������� ��� ����� ���� ��� �������� ������ ���\n"
2600"            %(hostname)s.  ������� ��� ����� ���� ������ ��� �� ������ "
2601"������������ �����������\n"
2602"            ��� �� �����, � �� ����������, �� �����������, ��� �� �������� "
2603"��� �����������\n"
2604"            ��� ���������� ���."
2605
2606#: Mailman/Cgi/listinfo.py:137
2607msgid "right"
2608msgstr "�����"
2609
2610#: Mailman/Cgi/listinfo.py:140
2611msgid ""
2612" To visit the general information page for an unadvertised list,\n"
2613"        open a URL similar to this one, but with a '/' and the %(adj)s\n"
2614"        list name appended.\n"
2615"        <p>List administrators, you can visit "
2616msgstr ""
2617" ��� �� ������������ �� ������ �� ��� ������� ����������� ���� ������ ��� "
2618"���\n"
2619"        �����������, ������� ��� URL �������� �� �� ������, ���� �� ��� '/' "
2620"��� �� %(adj)s\n"
2621"        ����� ��� ������ ������������.\n"
2622"        <p>�� ������������ ��� ������, ������� �� ����������� "
2623
2624#: Mailman/Cgi/listinfo.py:145
2625msgid "the list admin overview page"
2626msgstr "�� ������ ������ ����������� ��� ������"
2627
2628#: Mailman/Cgi/listinfo.py:146
2629msgid ""
2630" to find the management interface for your list.\n"
2631"         <p>If you are having trouble using the lists, please contact "
2632msgstr ""
2633" ���� �� ����� �� ���������� ����������� ��� �� ����� ����.\n"
2634"         <p>�� ����� �������� �� �� ����� ��� ������, �������� ������������� "
2635
2636#: Mailman/Cgi/listinfo.py:223
2637msgid ""
2638"Please answer the following question to prove that\n"
2639"                    you are not a bot:"
2640msgstr ""
2641
2642#: Mailman/Cgi/listinfo.py:253
2643msgid "Edit Options"
2644msgstr "�������� ������������"
2645
2646#: Mailman/Cgi/listinfo.py:260 Mailman/Cgi/options.py:975
2647#: Mailman/Cgi/roster.py:137
2648msgid "View this page in"
2649msgstr "����� ���� �� ������ ��"
2650
2651#: Mailman/Cgi/listinfo.py:266
2652msgid "This form requires JavaScript."
2653msgstr ""
2654
2655#: Mailman/Cgi/options.py:68 Mailman/Cgi/options.py:81
2656#: Mailman/Cgi/options.py:98
2657msgid "CGI script error"
2658msgstr "����� ��� CGI script"
2659
2660#: Mailman/Cgi/options.py:71
2661msgid "Invalid request method: %(method)s"
2662msgstr ""
2663
2664#: Mailman/Cgi/options.py:155
2665msgid "No address given"
2666msgstr "�� ������� ���������"
2667
2668#: Mailman/Cgi/options.py:176
2669msgid "Illegal Email Address"
2670msgstr "�� ������ Email ���������"
2671
2672#: Mailman/Cgi/options.py:183 Mailman/Cgi/options.py:240
2673#: Mailman/Cgi/options.py:264
2674msgid "No such member: %(safeuser)s."
2675msgstr "��� ������� ������ �����: %(safeuser)s."
2676
2677#: Mailman/Cgi/options.py:208
2678#, fuzzy
2679msgid "If you are a list member, a confirmation email has been sent."
2680msgstr "�� email ��� ��� ����������� ���� ������."
2681
2682#: Mailman/Cgi/options.py:209 Mailman/Cgi/subscribe.py:296
2683#: Mailman/Commands/cmd_subscribe.py:133 Mailman/Commands/cmd_unsubscribe.py:80
2684#, fuzzy
2685msgid "You already have a subscription pending confirmation"
2686msgstr "���������� �������� ���� %(realname)s"
2687
2688#: Mailman/Cgi/options.py:210
2689#, fuzzy
2690msgid ""
2691"If you are a list member, your unsubscription request has been\n"
2692"             forwarded to the list administrator for approval."
2693msgstr ""
2694"�� ������ ��� �� �������� ��� ����\n"
2695"                    ��������� ��� ������� ��� ����������� ��� ������."
2696
2697#: Mailman/Cgi/options.py:254
2698#, fuzzy
2699msgid ""
2700"If you are a list member,\n"
2701"            your password has been emailed to you."
2702msgstr "��� ���� ������ ����������� ��� ���������� ��� �������."
2703
2704#: Mailman/Cgi/options.py:297
2705msgid "Authentication failed."
2706msgstr "� ����������� �������."
2707
2708#: Mailman/Cgi/options.py:365
2709msgid "A reminder of your password has been emailed to you."
2710msgstr "��� ���� ������ ����������� ��� ���������� ��� �������."
2711
2712#: Mailman/Cgi/options.py:372
2713msgid ""
2714"The list administrator may not view the other\n"
2715"            subscriptions for this user."
2716msgstr ""
2717"� ������������ ��� ������ ������ �� ��� ������ �� ��� ��� �����\n"
2718"            �������� ��� ����� ��� ������."
2719
2720#: Mailman/Cgi/options.py:373 Mailman/Cgi/options.py:422
2721#: Mailman/Cgi/options.py:550 Mailman/Cgi/options.py:775
2722msgid "Note: "
2723msgstr "��������:"
2724
2725#: Mailman/Cgi/options.py:378
2726msgid "List subscriptions for %(safeuser)s on %(hostname)s"
2727msgstr "�������� ��� ����� ��� %(safeuser)s ��� %(hostname)s"
2728
2729#: Mailman/Cgi/options.py:381
2730msgid ""
2731"Click on a link to visit your options page for the\n"
2732"        requested mailing list."
2733msgstr ""
2734"������� �� ��� link ��� �� ������������ �� ������ ��� �������� ���\n"
2735"        ��� �� ������������ ����� ������������ ������������."
2736
2737#: Mailman/Cgi/options.py:419
2738msgid ""
2739"The list administrator may not change the names\n"
2740"            or addresses for this user's other subscriptions.  However, the\n"
2741"            subscription for this mailing list has been changed."
2742msgstr ""
2743"� ������������ ��� ������ ���� �� ��� �������� ������� �� �������\n"
2744"            � ��� ����������� ��� ����� �������� ��� ������. ��������, �\n"
2745"            ������� �� ����� ��� ����� ���� �������."
2746
2747#: Mailman/Cgi/options.py:442
2748msgid "Addresses did not match!"
2749msgstr "�� ����������� ��� ����������!"
2750
2751#: Mailman/Cgi/options.py:447
2752msgid "You are already using that email address"
2753msgstr "�������������� ��� ���� �� ��������� ������������ ������������"
2754
2755#: Mailman/Cgi/options.py:459
2756msgid ""
2757"The new address you requested %(newaddr)s is already a member of the\n"
2758"%(listname)s mailing list, however you have also requested a global change "
2759"of\n"
2760"address.  Upon confirmation, any other mailing list containing the address\n"
2761"%(safeuser)s will be changed. "
2762msgstr ""
2763"� ��� ��������� ��� �������� %(newaddr)s ���������� ��� ��� �����\n"
2764"%(listname)s, ������ ����� ������ ������� ��� �������� ������ ��� "
2765"����������.\n"
2766"����� ����� �����������, ���� ���� ����� � ����� �������� �� ���������\n"
2767"%(safeuser)s �� ��������. "
2768
2769#: Mailman/Cgi/options.py:468
2770msgid "The new address is already a member: %(newaddr)s"
2771msgstr "� ��� ��������� ����� ��� �����: %(newaddr)s"
2772
2773#: Mailman/Cgi/options.py:474
2774msgid "Addresses may not be blank"
2775msgstr "�� ����������� �� ������ �� ����� �����"
2776
2777#: Mailman/Cgi/options.py:488
2778msgid "A confirmation message has been sent to %(newaddr)s. "
2779msgstr "��� ������ ������������ ���� ������ ��� %(newaddr)s. "
2780
2781#: Mailman/Cgi/options.py:497
2782msgid "Bad email address provided"
2783msgstr "� email ��������� ��� ������ ��� ����� ������"
2784
2785#: Mailman/Cgi/options.py:499
2786msgid "Illegal email address provided"
2787msgstr "������ �� ������ email ���������"
2788
2789#: Mailman/Cgi/options.py:501
2790msgid "%(newaddr)s is already a member of the list."
2791msgstr "%(newaddr)s ����� ��� ����� ��� ������."
2792
2793#: Mailman/Cgi/options.py:504
2794msgid ""
2795"%(newaddr)s is banned from this list.  If you\n"
2796"                      think this restriction is erroneous, please contact\n"
2797"                      the list owners at %(owneraddr)s."
2798msgstr ""
2799"� %(newaddr)s ����� ������������ ��� �� �����.\n"
2800"�� �������� ��� � ����������� ����� �����������, �������� �������������\n"
2801"�� ��� ���������� ��� ������ ��� %(owneraddr)s."
2802
2803#: Mailman/Cgi/options.py:515
2804msgid "Member name successfully changed. "
2805msgstr "�� ����� ��� ������ ��������� �� ��������."
2806
2807#: Mailman/Cgi/options.py:525
2808msgid ""
2809"The list administrator may not change the\n"
2810"                    password for a user."
2811msgstr ""
2812"� ������������ ��� ������ ������ �� ��� ������ �� \n"
2813"            ��� ������ ��������� ��� ��� ������."
2814
2815#: Mailman/Cgi/options.py:534
2816msgid "Passwords may not be blank"
2817msgstr "�� ������� �� ������� �� ����� �����"
2818
2819#: Mailman/Cgi/options.py:539
2820msgid "Passwords did not match!"
2821msgstr "�� ������� ��� ����������!"
2822
2823#: Mailman/Cgi/options.py:547
2824msgid ""
2825"The list administrator may not change the\n"
2826"            password for this user's other subscriptions.  However, the\n"
2827"            password for this mailing list has been changed."
2828msgstr ""
2829"� ������������ ��� ������ ���� �� ��� �������� ������� ���\n"
2830"            ������ ��������� ��� ����� �������� ��� ������. ��������, �\n"
2831"            ������� ��������� ��� ����� ��� ����� ���� �������."
2832
2833#: Mailman/Cgi/options.py:564 Mailman/Commands/cmd_password.py:83
2834#: Mailman/Commands/cmd_password.py:109
2835msgid "Password successfully changed."
2836msgstr "� ������� ������ �� ��������."
2837
2838#: Mailman/Cgi/options.py:573
2839msgid ""
2840"You must confirm your unsubscription request by turning\n"
2841"                on the checkbox below the <em>Unsubscribe</em> button.  You\n"
2842"                have not been unsubscribed!"
2843msgstr ""
2844"������ �� ������������� �� ������ ��� ��� �������� �������� ���\n"
2845"                �������� checkbox �� ������ <em>��������</em>.  ���\n"
2846"                ����� ���������!"
2847
2848#: Mailman/Cgi/options.py:594
2849#, fuzzy
2850msgid "via the member options page"
2851msgstr "%(realname)s �����: ������ �������� ��� ��� �������� ��� �����"
2852
2853#: Mailman/Cgi/options.py:614
2854msgid "Unsubscription results"
2855msgstr "������������ ���������"
2856
2857#: Mailman/Cgi/options.py:618
2858msgid ""
2859"Your unsubscription request has been received and\n"
2860"            forwarded on to the list moderators for approval.  You will\n"
2861"            receive notification once the list moderators have made their\n"
2862"            decision."
2863msgstr ""
2864"�� ������ ��� ��� �������� ���� ������ ��� ����\n"
2865"            ��������� ����� ������������ ��� ������ ��� �������.  �� ������\n"
2866"            ���������� ����� �� ������������ ������ ��� ������� ����."
2867
2868#: Mailman/Cgi/options.py:623
2869msgid ""
2870"You have been successfully unsubscribed from the\n"
2871"            mailing list %(fqdn_listname)s.  If you were receiving digest\n"
2872"            deliveries you may get one more digest.  If you have any "
2873"questions\n"
2874"            about your unsubscription, please contact the list owners at\n"
2875"            %(owneraddr)s."
2876msgstr ""
2877"����� ��������� �� �������� ��� �� ����� ������������ ������������\n"
2878"            %(fqdn_listname)s.  �� ���������� ������������� �� �������� ��� "
2879"������\n"
2880"            ������ �� ����� ��� ����� �������� ��� ������� ��� ���������� "
2881"�����.  �� �����\n"
2882"            ������ ������� ������� �� �� �������� ���, ����������� "
2883"������������� �� ���� ����������\n"
2884"            ��� ������ ��� %(owneraddr)s."
2885
2886#: Mailman/Cgi/options.py:772
2887msgid ""
2888"The list administrator may not change the\n"
2889"                options for this user's other subscriptions.  However the\n"
2890"                options for this mailing list subscription has been\n"
2891"                changed."
2892msgstr ""
2893"� ������������ ��� ������ ���� �� ��� ������ �� ������� ���\n"
2894"                �������� ��� ��� ����� �������� ��� ������. ��������, ��\n"
2895"            �������� ��� ����� ��� ����� ���� �������."
2896
2897#: Mailman/Cgi/options.py:782
2898msgid ""
2899"The list administrator has disabled digest delivery for\n"
2900"            this list, so your delivery option has not been set.  However "
2901"your\n"
2902"            other options have been set successfully."
2903msgstr ""
2904"� ������������ ��� ������ ���� ��������������� ��� �������� ��� ��������� \n"
2905"��� ������, ����� ���� �� �������� �������� ��� ���������. ������\n"
2906" �� ����� �������� ��� ����� ������� �� ��������."
2907
2908#: Mailman/Cgi/options.py:786
2909msgid ""
2910"The list administrator has disabled non-digest delivery\n"
2911"            for this list, so your delivery option has not been set.  "
2912"However\n"
2913"            your other options have been set successfully."
2914msgstr ""
2915"� ������������ ��� ������ ���� ��������������� �� �� ������������� "
2916"�������� \n"
2917"��������� ��� ���� �� �����, �������� � ������� ��� ��� ��� �������� ��� "
2918"���� �������.\n"
2919"  ������ �� ����� �������� ��� ����� ������� �� ��������."
2920
2921#: Mailman/Cgi/options.py:790
2922msgid "You have successfully set your options."
2923msgstr "�� �������� ��� ��������� �� ��������."
2924
2925#: Mailman/Cgi/options.py:793
2926msgid "You may get one last digest."
2927msgstr "������ �� ������ ����� ��� ��������� ������������� ������."
2928
2929#: Mailman/Cgi/options.py:865
2930msgid "<em>Yes, I really want to unsubscribe</em>"
2931msgstr "<em>���, ���� �������� �� ��������</em>"
2932
2933#: Mailman/Cgi/options.py:869
2934msgid "Change My Password"
2935msgstr "������ ��� ������� ��������� ���"
2936
2937#: Mailman/Cgi/options.py:872
2938msgid "List my other subscriptions"
2939msgstr "������� ��� ��������� ���������� ���"
2940
2941#: Mailman/Cgi/options.py:879
2942msgid "Email My Password To Me"
2943msgstr "�������� ��� ������� ��������� ��� �� email �� ����"
2944
2945#: Mailman/Cgi/options.py:881
2946msgid "password"
2947msgstr "������� ���������"
2948
2949#: Mailman/Cgi/options.py:883
2950msgid "Log out"
2951msgstr "����������"
2952
2953#: Mailman/Cgi/options.py:885
2954msgid "Submit My Changes"
2955msgstr "�������� ��� ������� ���"
2956
2957#: Mailman/Cgi/options.py:897
2958msgid "days"
2959msgstr "������"
2960
2961#: Mailman/Cgi/options.py:899
2962msgid "day"
2963msgstr "�����"
2964
2965#: Mailman/Cgi/options.py:900
2966msgid "%(days)d %(units)s"
2967msgstr "%(days)d %(units)s"
2968
2969#: Mailman/Cgi/options.py:906
2970msgid "Change My Address and Name"
2971msgstr "������ ��� ���������� ��� ��� �������� ���"
2972
2973#: Mailman/Cgi/options.py:932
2974msgid "<em>No topics defined</em>"
2975msgstr "<em>��� ��������� ������</em>"
2976
2977#: Mailman/Cgi/options.py:940
2978msgid ""
2979"\n"
2980"You are subscribed to this list with the case-preserved address\n"
2981"<em>%(cpuser)s</em>."
2982msgstr ""
2983"\n"
2984"����� ������������� �� ���� �� ����� �� ���� ���������� ��� ���������� "
2985"���� \n"
2986"<em>%(cpuser)s</em>."
2987
2988#: Mailman/Cgi/options.py:956
2989msgid "%(realname)s list: member options login page"
2990msgstr "%(realname)s �����: ������ �������� ��� ��� �������� ��� �����"
2991
2992#: Mailman/Cgi/options.py:957
2993msgid "email address and "
2994msgstr "email ��������� ��� "
2995
2996#: Mailman/Cgi/options.py:960
2997msgid "%(realname)s list: member options for user %(safeuser)s"
2998msgstr "%(realname)s �����: �������� ������ ��� �� ������ %(safeuser)s"
2999
3000#: Mailman/Cgi/options.py:986
3001msgid ""
3002"In order to change your membership option, you must\n"
3003"    first log in by giving your %(extra)smembership password in the section\n"
3004"    below.  If you don't remember your membership password, you can have it\n"
3005"    emailed to you by clicking on the button below.  If you just want to\n"
3006"    unsubscribe from this list, click on the <em>Unsubscribe</em> button and "
3007"a\n"
3008"    confirmation message will be sent to you.\n"
3009"\n"
3010"    <p><strong><em>Important:</em></strong> From this point on, you must "
3011"have\n"
3012"    cookies enabled in your browser, otherwise none of your changes will "
3013"take\n"
3014"    effect.\n"
3015"    "
3016msgstr ""
3017"����������� �� �������� ��� ������� ��� ���������� ���, ������\n"
3018"    ����� �� ���������� �������� ��� %(extra)smembership ������ ��� ���� "
3019"��������\n"
3020"    �������.  �� �� ������� ��� ������ ���, �������� �� ��� �� ��������� �� "
3021"email\n"
3022"    ����� �� �������� ��� �������� ������.  �� ����� ���� �� ����������� ��� "
3023"����\n"
3024"    �� �����, ������� ��� ������ <em>��������</em> ��� ��� ������ "
3025"������������\n"
3026"    �� ������ �� ����.\n"
3027"\n"
3028"    <p><strong><em>���������:</em></strong> ��� ���� �� ������ ��� ����, "
3029"������ �� �����\n"
3030"    �������������� �� cookies ��� ��������� ��� �������������� ��� ��� "
3031"�������� ��� \n"
3032"    Internet, ����������� ����� ��� ��� ������� ��� ��� �� �������������.\n"
3033"    "
3034
3035#: Mailman/Cgi/options.py:1000
3036msgid "Email address:"
3037msgstr "Email ���������"
3038
3039#: Mailman/Cgi/options.py:1004
3040msgid "Password:"
3041msgstr "������� ���������"
3042
3043#: Mailman/Cgi/options.py:1006
3044msgid "Log in"
3045msgstr "�������"
3046
3047#: Mailman/Cgi/options.py:1014
3048msgid ""
3049"By clicking on the <em>Unsubscribe</em> button, a\n"
3050"    confirmation message will be emailed to you.  This message will have a\n"
3051"    link that you should click on to complete the removal process (you can\n"
3052"    also confirm by email; see the instructions in the confirmation\n"
3053"    message)."
3054msgstr ""
3055"�������� �� ������ <em>��������</em>, �� ���\n"
3056"   .������ ��� ������ ������������. �� ���� �� ������ �� ������� ����\n"
3057"    ��������� ��� ����� �� ������ �� �������� ��� �� ����������� � "
3058"����������\n"
3059"    ��������� (������ ������ �� ����� ����������� ���� email. ����� ��� "
3060"������� ��� ������ ������������."
3061
3062#: Mailman/Cgi/options.py:1022
3063msgid "Password reminder"
3064msgstr "���������� ������� ���������"
3065
3066#: Mailman/Cgi/options.py:1026
3067msgid ""
3068"By clicking on the <em>Remind</em> button, your\n"
3069"    password will be emailed to you."
3070msgstr ""
3071"�������� �� ������ <em>����������</em>, �� ���\n"
3072"    ������ � ������� ��� �� emailed."
3073
3074#: Mailman/Cgi/options.py:1029
3075msgid "Remind"
3076msgstr "����������"
3077
3078#: Mailman/Cgi/options.py:1129 Mailman/ListAdmin.py:227
3079msgid "<missing>"
3080msgstr "<��� �������>"
3081
3082#: Mailman/Cgi/options.py:1140
3083msgid "Requested topic is not valid: %(topicname)s"
3084msgstr "�� ��������� ���� ��� ����� ������: %(topicname)s"
3085
3086#: Mailman/Cgi/options.py:1145
3087msgid "Topic filter details"
3088msgstr "������������ ��� �� ������ �������"
3089
3090#: Mailman/Cgi/options.py:1148
3091msgid "Name:"
3092msgstr "�����:"
3093
3094#: Mailman/Cgi/options.py:1150
3095msgid "Pattern (as regexp):"
3096msgstr "������ (�� regexp):"
3097
3098#: Mailman/Cgi/private.py:64
3099msgid "Private Archive Error"
3100msgstr "����� ��� �������� �������� ������"
3101
3102#: Mailman/Cgi/private.py:65
3103msgid "You must specify a list."
3104msgstr "������ �� ������� ��� �����"
3105
3106#: Mailman/Cgi/private.py:72
3107msgid "Private archive - \"./\" and \"../\" not allowed in URL."
3108msgstr ""
3109"�������� �������� ������ - \"./\" ��� \"../\" ��� ����������� � �������� ��� "
3110"�������� ����."
3111
3112#: Mailman/Cgi/private.py:109
3113msgid "Private Archive Error - %(msg)s"
3114msgstr "����� ��� �������� �������� ������ - %(msg)s"
3115
3116#: Mailman/Cgi/private.py:157
3117#, fuzzy
3118msgid ""
3119"If you are a list member,\n"
3120"                          your password has been emailed to you."
3121msgstr "��� ���� ������ ����������� ��� ���������� ��� �������."
3122
3123#: Mailman/Cgi/private.py:161
3124#, fuzzy
3125msgid "Please enter your email address"
3126msgstr "� email ��������� ���:"
3127
3128#: Mailman/Cgi/private.py:218
3129msgid "Private archive file not found"
3130msgstr "�� ������ ��� ��������� ��������� �� �������"
3131
3132#: Mailman/Cgi/rmlist.py:76
3133#, fuzzy
3134msgid "No such list %(safelistname)s"
3135msgstr "��� ������� ������ �����: %(listname)s"
3136
3137#: Mailman/Cgi/rmlist.py:94
3138msgid "You're being a sneaky list owner!"
3139msgstr "����� ������� ���������� ������!"
3140
3141#: Mailman/Cgi/rmlist.py:139
3142msgid "You are not authorized to delete this mailing list"
3143msgstr ""
3144"��� ����� ��� ������������� �� ���������� �� ����� ������������ ������������"
3145
3146#: Mailman/Cgi/rmlist.py:180
3147msgid "Mailing list deletion results"
3148msgstr "������������ ��������� ������"
3149
3150#: Mailman/Cgi/rmlist.py:187
3151msgid ""
3152"You have successfully deleted the mailing list\n"
3153"    <b>%(listname)s</b>."
3154msgstr ""
3155"����� ��������� �� ����� ������������ ������������\n"
3156"    <b>%(listname)s</b> �� ��������."
3157
3158#: Mailman/Cgi/rmlist.py:191
3159msgid ""
3160"There were some problems deleting the mailing list\n"
3161"        <b>%(listname)s</b>.  Contact your site administrator at "
3162"%(sitelist)s\n"
3163"        for details."
3164msgstr ""
3165"������� ������ ���������� ��� �������� ��� ������\n"
3166"        <b>%(listname)s</b>.  ������������� �� �� ����������� ��� ������� "
3167"���\n"
3168"        %(sitelist)s ��� ������������."
3169
3170#: Mailman/Cgi/rmlist.py:208
3171msgid "Permanently remove mailing list <em>%(realname)s</em>"
3172msgstr "�������� �������� ��� ������ <em>%(realname)s</em>"
3173
3174#: Mailman/Cgi/rmlist.py:209
3175#, fuzzy
3176msgid "Permanently remove mailing list %(realname)s"
3177msgstr "�������� �������� ��� ������ <em>%(realname)s</em>"
3178
3179#: Mailman/Cgi/rmlist.py:222
3180msgid ""
3181"This page allows you as the list owner, to permanently\n"
3182"    remove this mailing list from the system.  <strong>This action is not\n"
3183"    undoable</strong> so you should undertake it only if you are absolutely\n"
3184"    sure this mailing list has served its purpose and is no longer "
3185"necessary.\n"
3186"\n"
3187"    <p>Note that no warning will be sent to your list members and after "
3188"this\n"
3189"    action, any subsequent messages sent to the mailing list, or any of its\n"
3190"    administrative addreses will bounce.\n"
3191"\n"
3192"    <p>You also have the option of removing the archives for this mailing "
3193"list\n"
3194"    at this time.  It is almost always recommended that you do\n"
3195"    <strong>not</strong> remove the archives, since they serve as the\n"
3196"    historical record of your mailing list.\n"
3197"\n"
3198"    <p>For your safety, you will be asked to reconfirm the list password.\n"
3199"    "
3200msgstr ""
3201"���� � ������ ��������� �� ���� �� ��������� ��� ������, �� ����������\n"
3202"    ������ ���� �� ����� ������������ ������������ ��� ��\n"
3203"    �������.  <strong>���� � �������� ��� ������ �� ���������</strong>\n"
3204"    ��� ���� �� ������ �� ����������� ���� �� ����� �������\n"
3205"    �������� ��� ���� � ����� ��� ���������� ���.\n"
3206"\n"
3207"    <p>������ �� ��������� ��� �� �� ������ ����� ���������� ��� ���� ��� "
3208"������\n"
3209"    ��� ��� ���� ��� ���� ��� ��������, ���� ������ ��� ��������� �� ���� �� "
3210"�����,\n"
3211"    � �� ����������� ���� ��� ��� �������������� ����������� ��� �� "
3212"������������.\n"
3213"\n"
3214"    <p>����� ������ ��� ������� �� ���������� �� �������� ������ ����� ��� "
3215"������\n"
3216"    ���� �� ������.  ����� ������ ����� ������������� �� <strong>���</"
3217"strong>\n"
3218"    ���������� �� ������, ���� ����������� �� �������� ��������� ��� ������ "
3219"���.\n"
3220"\n"
3221"    <p>��� �� ���� ��� ��������, �� ���������� ��� �� �����-���������� ��� "
3222"������ ��� ������.\n"
3223"    "
3224
3225#: Mailman/Cgi/rmlist.py:243
3226msgid "List password:"
3227msgstr "������� ��������� ������:"
3228
3229#: Mailman/Cgi/rmlist.py:247
3230msgid "Also delete archives?"
3231msgstr "�������� ��� ��� ��������� �������;"
3232
3233#: Mailman/Cgi/rmlist.py:255
3234msgid "<b>Cancel</b> and return to list administration"
3235msgstr "<b>�������</b> ��� ��������� ��� ���������� ��� ������"
3236
3237#: Mailman/Cgi/rmlist.py:258
3238msgid "Delete this list"
3239msgstr "�������� ����� ��� ������"
3240
3241#: Mailman/Cgi/roster.py:48 Mailman/Cgi/subscribe.py:56
3242msgid "Invalid options to CGI script"
3243msgstr "�� ������� �������� ��� CGI script"
3244
3245#: Mailman/Cgi/roster.py:118
3246msgid "%(realname)s roster authentication failed."
3247msgstr "� ����������� ��� %(realname)s ���� �������� �������."
3248
3249#: Mailman/Cgi/subscribe.py:128
3250msgid "You must supply a valid email address."
3251msgstr "������ �� ������ ��� ������ ��������� ������������ ������������."
3252
3253#: Mailman/Cgi/subscribe.py:153
3254msgid "reCAPTCHA validation failed: %(e_codes)s"
3255msgstr ""
3256
3257#: Mailman/Cgi/subscribe.py:156
3258msgid "reCAPTCHA could not be validated: %(e_reason)s"
3259msgstr ""
3260
3261#: Mailman/Cgi/subscribe.py:183
3262msgid "The form is too old.  Please GET it again."
3263msgstr ""
3264
3265#: Mailman/Cgi/subscribe.py:186
3266msgid "Please take a few seconds to fill out the form before submitting it."
3267msgstr ""
3268
3269#: Mailman/Cgi/subscribe.py:189
3270msgid "The hidden token didn't match.  Did your IP change?"
3271msgstr ""
3272
3273#: Mailman/Cgi/subscribe.py:192
3274msgid "There was no hidden token in your submission or it was corrupted."
3275msgstr ""
3276
3277#: Mailman/Cgi/subscribe.py:193
3278msgid "You must GET the form before submitting it."
3279msgstr ""
3280
3281#: Mailman/Cgi/subscribe.py:199
3282msgid "This was not the right answer to the CAPTCHA question."
3283msgstr ""
3284
3285#: Mailman/Cgi/subscribe.py:204
3286msgid "You may not subscribe a list to itself!"
3287msgstr "�� �������� �� ��������� ��� ����� ���� ����� ���!"
3288
3289#: Mailman/Cgi/subscribe.py:212
3290msgid "If you supply a password, you must confirm it."
3291msgstr "�� ������ ������ ������, ������ �� ��� �������������."
3292
3293#: Mailman/Cgi/subscribe.py:214
3294msgid "Your passwords did not match."
3295msgstr "�� ������� ��� ��� ����������."
3296
3297#: Mailman/Cgi/subscribe.py:248
3298msgid ""
3299"Your subscription request has been received, and will soon be acted upon.\n"
3300"Depending on the configuration of this mailing list, your subscription "
3301"request\n"
3302"may have to be first confirmed by you via email, or approved by the list\n"
3303"moderator.  If confirmation is required, you will soon get a confirmation\n"
3304"email which contains further instructions."
3305msgstr ""
3306"�� ������ ��� ��� ������� ���� ������, ��� �� ��������� �������.\n"
3307"������� �� ��� ��������� ��� ������, �� ������ ��� ��� �������\n"
3308"������ �� ������ ����� �� ������������ ��� ���� ���� email, � �� �������� "
3309"��� ���\n"
3310"���������� ��� ������.  �� ���������� �����������, �� ������ ������� ��� "
3311"mail\n"
3312" ������������ �� ����� �������� ��������� �������."
3313
3314#: Mailman/Cgi/subscribe.py:262
3315msgid ""
3316"The email address you supplied is banned from this\n"
3317"        mailing list.  If you think this restriction is erroneous, please\n"
3318"        contact the list owners at %(listowner)s."
3319msgstr ""
3320"� ��������� ������������ ������������ ��� ������ ����� ������������ ��\n"
3321"        ���� �� ����� ������������ ������������.  �� �������� ��� ����� �\n"
3322"        ����������� ����� ����������, ����������� ������������� �� ����\n"
3323"        ���������� ��� ������ ��� %(listowner)s."
3324
3325#: Mailman/Cgi/subscribe.py:266
3326msgid ""
3327"The email address you supplied is not valid.  (E.g. it must contain an\n"
3328"`@'.)"
3329msgstr ""
3330"� ��������� ������������ ������������ ��� ������ ��� ����� ������.  (�.�. "
3331"������ �� �������� ��� `@'.)"
3332
3333#: Mailman/Cgi/subscribe.py:270
3334msgid ""
3335"Your subscription is not allowed because the email address you gave is\n"
3336"insecure."
3337msgstr ""
3338"� ������� ��� ��� ����������� ������ � email ��������� ��� ������ ���\n"
3339"����� �������."
3340
3341#: Mailman/Cgi/subscribe.py:278
3342msgid ""
3343"Confirmation from your email address is required, to prevent anyone from\n"
3344"subscribing you without permission.  Instructions are being sent to you at\n"
3345"%(email)s.  Please note your subscription will not start until you confirm\n"
3346"your subscription."
3347msgstr ""
3348"���������� � ����������� ��� ��� email ��������� ���, ��� �� ��� ������\n"
3349"������������ �� ��� �������� ����� �� ���� ��� �����.  ��� ���������� "
3350"�������\n"
3351"��� %(email)s.  ����������� ��������� ��� � ������� ��� �� �� ��������� "
3352"�����\n"
3353"�� ������������� ��� �������."
3354
3355#: Mailman/Cgi/subscribe.py:290
3356msgid ""
3357"Your subscription request was deferred because %(x)s.  Your request has "
3358"been\n"
3359"forwarded to the list moderator.  You will receive email informing you of "
3360"the\n"
3361"moderator's decision when they get to your request."
3362msgstr ""
3363"�� ������ ��� ��� ������� ����������� ������ %(x)s.  �� ������ ��� "
3364"����������\n"
3365"��� ������������� ��� ������.  �� ������ ��� email �� ����� �� ��� "
3366"����������\n"
3367"��� ��� ������� ��� ����������� ���� ����� �� ������ ���."
3368
3369#: Mailman/Cgi/subscribe.py:300 Mailman/Commands/cmd_confirm.py:61
3370msgid "You are already subscribed."
3371msgstr "����� ��� �������������."
3372
3373#: Mailman/Cgi/subscribe.py:315
3374msgid "Mailman privacy alert"
3375msgstr "�������� ������������� ��� Mailman"
3376
3377#: Mailman/Cgi/subscribe.py:316
3378msgid ""
3379"An attempt was made to subscribe your address to the mailing list\n"
3380"%(listaddr)s.  You are already subscribed to this mailing list.\n"
3381"\n"
3382"Note that the list membership is not public, so it is possible that a bad\n"
3383"person was trying to probe the list for its membership.  This would be a\n"
3384"privacy violation if we let them do this, but we didn't.\n"
3385"\n"
3386"If you submitted the subscription request and forgot that you were already\n"
3387"subscribed to the list, then you can ignore this message.  If you suspect "
3388"that\n"
3389"an attempt is being made to covertly discover whether you are a member of "
3390"this\n"
3391"list, and you are worried about your privacy, then feel free to send a "
3392"message\n"
3393"to the list administrator at %(listowner)s.\n"
3394msgstr ""
3395"������ ��� ���������� �� ����� ������� ��� ���������� ��� ��� �����\n"
3396"%(listaddr)s.  ����� ��� ������������� �� ���� �� �����.\n"
3397"\n"
3398"������ �� ��������� ��� �� ���� ��� ������ ��� ����� ������� �����, "
3399"��������\n"
3400"����� ������ ������� ���������� ������ �� ��������� �� �������������� �� "
3401"�����\n"
3402"��� �� ���� ���.  ������ �� ��������� ��� ��������� ��������� �� ��� ������� "
3403"��\n"
3404"���������, ���� ���� ��� �����.\n"
3405"�� �������� ����� �� ������ ��� ������� ��� ������ ������� ��� ����� ��� "
3406"�������������\n"
3407"��� �����, ���� ������ �� ��������� ���� �� ������.  �� ����������� ��� "
3408"�������\n"
3409"�������� �� ����������� �� ����� ����� ��� ������ � ���, ��� ���������� ��� "
3410"���\n"
3411"������������ ��� �������� ���, ���� �� ��������� �� �������� ������ ��� "
3412"�����������\n"
3413"��� ������ ��� %(listowner)s.\n"
3414
3415#: Mailman/Cgi/subscribe.py:335
3416msgid "This list does not support digest delivery."
3417msgstr "���� � ����� ��� ����������� ������������� �������� ���������."
3418
3419#: Mailman/Cgi/subscribe.py:337
3420msgid "This list only supports digest delivery."
3421msgstr "���� � ����� ����������� ���� ������������� �������� ���������."
3422
3423#: Mailman/Cgi/subscribe.py:344
3424msgid "You have been successfully subscribed to the %(realname)s mailing list."
3425msgstr ""
3426"����� �������� �� �������� ��� ����� ������������ ������������ %(realname)s."
3427
3428#: Mailman/Commands/cmd_confirm.py:18
3429msgid ""
3430"\n"
3431"    confirm <confirmation-string>\n"
3432"        Confirm an action.  The confirmation-string is required and should "
3433"be\n"
3434"        supplied by a mailback confirmation notice.\n"
3435msgstr ""
3436"\n"
3437"    ����������� <confirmation-string>\n"
3438"        ����������� ���������.  � ��������� ���������� ������������ "
3439"���������� ���\n"
3440"        ������ �� ����� ��� ��� ���������� �� ��� �������� ��� mail "
3441"������������.\n"
3442
3443#: Mailman/Commands/cmd_confirm.py:41 Mailman/Commands/cmd_lists.py:40
3444#: Mailman/Commands/cmd_set.py:133 Mailman/Commands/cmd_subscribe.py:69
3445#: Mailman/Commands/cmd_unsubscribe.py:52 Mailman/Commands/cmd_who.py:67
3446msgid "Usage:"
3447msgstr "�����:"
3448
3449#: Mailman/Commands/cmd_confirm.py:50
3450#, fuzzy
3451msgid ""
3452"Invalid confirmation string.  Note that confirmation strings expire\n"
3453"approximately %(days)s days after the initial request.  They also expire if\n"
3454"the request has already been handled in some way.  If your confirmation has\n"
3455"expired, please try to re-submit your original request or message."
3456msgstr ""
3457"� ��������� ���������� ������������ ��� ����� ������.  ������ �� ��������� "
3458"���\n"
3459"�� ���������� ���������� ������������ ������ ������� %(days)s ������ ���� "
3460"��\n"
3461"������ ������ ��������.  �� � ����������� ��� ���� �����, ����������� "
3462"�����������\n"
3463"�� ������������ �� ������ ��� ������ � ������."
3464
3465#: Mailman/Commands/cmd_confirm.py:56
3466msgid "Your request has been forwarded to the list moderator for approval."
3467msgstr "�� ������ ��� ���� ��������� ��� ����������� ��� ������ ��� �������."
3468
3469#: Mailman/Commands/cmd_confirm.py:64
3470msgid ""
3471"You are not currently a member.  Have you already unsubscribed or changed\n"
3472"your email address?"
3473msgstr ""
3474"��� ����� ����� ���� �� ������.  ����� ��� ��������� ��� �� ������ �\n"
3475"�������� ��� ����������� ��� ���������;"
3476
3477#: Mailman/Commands/cmd_confirm.py:69
3478msgid ""
3479"You are currently banned from subscribing to this list.  If you think this\n"
3480"restriction is erroneous, please contact the list owners at\n"
3481"%(owneraddr)s."
3482msgstr ""
3483"� ����������� ��������� ��� ������ ����� ������������ ��� �� �����.\n"
3484"�� �������� ��� � ����������� ����� �����������, �������� �������������\n"
3485"�� ��� ���������� ��� ������ ��� %(owneraddr)s."
3486
3487#: Mailman/Commands/cmd_confirm.py:74
3488msgid ""
3489"You were not invited to this mailing list.  The invitation has been "
3490"discarded,\n"
3491"and both list administrators have been alerted."
3492msgstr ""
3493"��� ����� ���������� �� ����������� �� ���� �� �����.  � ��������� ���� "
3494"���������� ����� ���������,\n"
3495"��� �� ������������ ��� ������ ����� ����� �������� ������������."
3496
3497#: Mailman/Commands/cmd_confirm.py:78
3498msgid "Bad approval password given.  Held message is still being held."
3499msgstr ""
3500"������ ����������� ������� ������������.  �� ������ ����������� �� ���������."
3501
3502#: Mailman/Commands/cmd_confirm.py:89 Mailman/Commands/cmd_confirm.py:92
3503#: Mailman/Commands/cmd_confirm.py:95
3504msgid "Confirmation succeeded"
3505msgstr "� ����������� ����� �� ��������"
3506
3507#: Mailman/Commands/cmd_echo.py:17
3508msgid ""
3509"\n"
3510"    echo [args]\n"
3511"        Simply echo an acknowledgement.  Args are echoed back unchanged.\n"
3512msgstr ""
3513"\n"
3514"    echo [args]\n"
3515"        ������� ��� ����������. �� ���������� ����������� ����� ����� "
3516"������.\n"
3517
3518#: Mailman/Commands/cmd_end.py:17
3519msgid ""
3520"\n"
3521"    end\n"
3522"        Stop processing commands.  Use this if your mail program "
3523"automatically\n"
3524"        adds a signature file.\n"
3525msgstr ""
3526"\n"
3527"    end\n"
3528"        ��������� ������������ �������.  ���� � ������� ������ �� "
3529"�������������� ��\n"
3530"        �� ��������� ������������ ������������ ��� ��������� �������� ��� "
3531"������ �� \n"
3532"        ��� �������� ���.\n"
3533
3534#: Mailman/Commands/cmd_help.py:17
3535msgid ""
3536"\n"
3537"    help\n"
3538"        Print this help message.\n"
3539msgstr ""
3540"\n"
3541"    �������\n"
3542"        ��������� ���� �� ��������� ������.\n"
3543
3544#: Mailman/Commands/cmd_help.py:47
3545msgid "You can access your personal options via the following url:"
3546msgstr ""
3547"�������� �� ������������ ��� ���������� ��� �������� ���� ��� ��������� "
3548"��������� �����:"
3549
3550#: Mailman/Commands/cmd_info.py:17
3551msgid ""
3552"\n"
3553"    info\n"
3554"        Get information about this mailing list.\n"
3555msgstr ""
3556"\n"
3557"    ����������\n"
3558"        ����� ����������� ��� ���� �� ����� ������������ ������������.\n"
3559
3560#: Mailman/Commands/cmd_info.py:39 Mailman/Commands/cmd_lists.py:62
3561msgid "n/a"
3562msgstr "��� ����� ���������"
3563
3564#: Mailman/Commands/cmd_info.py:44
3565msgid "List name:    %(listname)s"
3566msgstr "����� ������:    %(listname)s"
3567
3568#: Mailman/Commands/cmd_info.py:45
3569msgid "Description:  %(description)s"
3570msgstr "���������:  %(description)s"
3571
3572#: Mailman/Commands/cmd_info.py:46
3573msgid "Postings to:  %(postaddr)s"
3574msgstr "��������� ���:  %(postaddr)s"
3575
3576#: Mailman/Commands/cmd_info.py:47
3577msgid "List Helpbot: %(requestaddr)s"
3578msgstr "���������������� ������� ������: %(requestaddr)s"
3579
3580#: Mailman/Commands/cmd_info.py:48
3581msgid "List Owners:  %(owneraddr)s"
3582msgstr "���������� ��� ������:  %(owneraddr)s"
3583
3584#: Mailman/Commands/cmd_info.py:49
3585msgid "More information: %(listurl)s"
3586msgstr "������������ �����������: %(listurl)s"
3587
3588#: Mailman/Commands/cmd_join.py:17
3589msgid "The `join' command is synonymous with `subscribe'.\n"
3590msgstr "� ������ `���������' ����� �������� �� ��� ������ `�������'.\n"
3591
3592#: Mailman/Commands/cmd_leave.py:17
3593msgid "The `leave' command is synonymous with `unsubscribe'.\n"
3594msgstr "� ������ `���������' ����� �������� �� ��� ������ `��������'.\n"
3595
3596#: Mailman/Commands/cmd_lists.py:17
3597msgid ""
3598"\n"
3599"    lists\n"
3600"        See a list of the public mailing lists on this GNU Mailman server.\n"
3601msgstr ""
3602"\n"
3603"    ������\n"
3604"        ����� ��� ����� �� ��� �������� ������ ������������ ������������ "
3605"��.\n"
3606"        ���� �� GNU Mailman server.\n"
3607
3608#: Mailman/Commands/cmd_lists.py:44
3609msgid "Public mailing lists at %(hostname)s:"
3610msgstr "�������� ������ ������������ ������������ ��� %(hostname)s:"
3611
3612#: Mailman/Commands/cmd_lists.py:66
3613msgid "%(i)3d. List name:   %(realname)s"
3614msgstr "%(i)3d. ����� ������:   %(realname)s"
3615
3616#: Mailman/Commands/cmd_lists.py:67
3617msgid "     Description: %(description)s"
3618msgstr "     ���������: %(description)s"
3619
3620#: Mailman/Commands/cmd_lists.py:68
3621msgid "     Requests to: %(requestaddr)s"
3622msgstr "     ������ ����: %(requestaddr)s"
3623
3624#: Mailman/Commands/cmd_password.py:17
3625msgid ""
3626"\n"
3627"    password [<oldpassword> <newpassword>] [address=<address>]\n"
3628"        Retrieve or change your password.  With no arguments, this returns\n"
3629"        your current password.  With arguments <oldpassword> and "
3630"<newpassword>\n"
3631"        you can change your password.\n"
3632"\n"
3633"        If you're posting from an address other than your membership "
3634"address,\n"
3635"        specify your membership address with `address=<address>' (no "
3636"brackets\n"
3637"        around the email address, and no quotes!).  Note that in this case "
3638"the\n"
3639"        response is always sent to the subscribed address.\n"
3640msgstr ""
3641"\n"
3642"    password [<oldpassword> <newpassword>] [address=<address>]\n"
3643"        �������� � ������ ��� ������� ���.  ����� ��������, ������������ �\n"
3644"        ������ �������.  �� �������� �� <oldpassword> ��� <newpassword>\n"
3645"        �������� �� �������� ��� ������ ���.\n"
3646"\n"
3647"        �� �������� �������� ��� ����������� ��������� ��� ���� �� ��� ����� "
3648"�����\n"
3649"        �������������, ������ ��� ��������� �� ��� ����� ����������� �� "
3650"`address=<address>'\n"
3651"        (����� ����������� ���� email ���������, ��� ����� ����������!). "
3652"������ �� \n"
3653"        ��������� ��� �� ���� ��� ��������� � �������� ��������� ����� "
3654"����.\n"
3655"        ������������� �����������.\n"
3656
3657#: Mailman/Commands/cmd_password.py:51 Mailman/Commands/cmd_password.py:66
3658msgid "Your password is: %(password)s"
3659msgstr "� ������� ��� �����: %(password)s"
3660
3661#: Mailman/Commands/cmd_password.py:57 Mailman/Commands/cmd_password.py:72
3662#: Mailman/Commands/cmd_password.py:95 Mailman/Commands/cmd_password.py:121
3663#: Mailman/Commands/cmd_set.py:149 Mailman/Commands/cmd_set.py:219
3664msgid "You are not a member of the %(listname)s mailing list"
3665msgstr "��� ����� ����� ��� %(listname)s ������"
3666
3667#: Mailman/Commands/cmd_password.py:85 Mailman/Commands/cmd_password.py:111
3668msgid ""
3669"You did not give the correct old password, so your password has not been\n"
3670"changed.  Use the no argument version of the password command to retrieve "
3671"your\n"
3672"current password, then try again."
3673msgstr ""
3674"�� ������ �� ����� ����� ������, �������� � ������� ��� ��� ������.\n"
3675"�������������� ��� ������ ����� �������� ��� ������� ��� ��� ������ ��� ���\n"
3676"�������� ��� ��������� �������, ��� ��� �������� ���������������."
3677
3678#: Mailman/Commands/cmd_password.py:89 Mailman/Commands/cmd_password.py:115
3679msgid ""
3680"\n"
3681"Usage:"
3682msgstr ""
3683"\n"
3684"�����:"
3685
3686#: Mailman/Commands/cmd_remove.py:17
3687msgid "The `remove' command is synonymous with `unsubscribe'.\n"
3688msgstr "� ������ `���������' ����� �������� �� ��� ������ `��������'.\n"
3689
3690#: Mailman/Commands/cmd_set.py:26
3691msgid ""
3692"\n"
3693"    set ...\n"
3694"        Set or view your membership options.\n"
3695"\n"
3696"        Use `set help' (without the quotes) to get a more detailed list of "
3697"the\n"
3698"        options you can change.\n"
3699"\n"
3700"        Use `set show' (without the quotes) to view your current option\n"
3701"        settings.\n"
3702msgstr ""
3703"\n"
3704"    ������� ...\n"
3705"        ������� � ���������� ��� �������� ��� ���������� ���.\n"
3706"\n"
3707"        ����� ��� `set help' (����� �� ����������) ��� �� ������ ��� ��� "
3708"���������\n"
3709"        ����� ��� �������� ��� ������ �������� �� ��������.\n"
3710"\n"
3711"        ����� ��� `set show' (����� �� ����������) ��� �� ����� ��� "
3712"��������� ���������.\n"
3713
3714#: Mailman/Commands/cmd_set.py:37
3715msgid ""
3716"\n"
3717"    set help\n"
3718"        Show this detailed help.\n"
3719"\n"
3720"    set show [address=<address>]\n"
3721"        View your current option settings.  If you're posting from an "
3722"address\n"
3723"        other than your membership address, specify your membership address\n"
3724"        with `address=<address>' (no brackets around the email address, and "
3725"no\n"
3726"        quotes!).\n"
3727"\n"
3728"    set authenticate <password> [address=<address>]\n"
3729"        To set any of your options, you must include this command first, "
3730"along\n"
3731"        with your membership password.  If you're posting from an address\n"
3732"        other than your membership address, specify your membership address\n"
3733"        with `address=<address>' (no brackets around the email address, and "
3734"no\n"
3735"        quotes!).\n"
3736"\n"
3737"    set ack on\n"
3738"    set ack off\n"
3739"        When the `ack' option is turned on, you will receive an\n"
3740"        acknowledgement message whenever you post a message to the list.\n"
3741"\n"
3742"    set digest plain\n"
3743"    set digest mime\n"
3744"    set digest off\n"
3745"        When the `digest' option is turned off, you will receive postings\n"
3746"        immediately when they are posted.  Use `set digest plain' if "
3747"instead\n"
3748"        you want to receive postings bundled into a plain text digest\n"
3749"        (i.e. RFC 1153 digest).  Use `set digest mime' if instead you want "
3750"to\n"
3751"        receive postings bundled together into a MIME digest.\n"
3752"\n"
3753"    set delivery on\n"
3754"    set delivery off\n"
3755"        Turn delivery on or off.  This does not unsubscribe you, but "
3756"instead\n"
3757"        tells Mailman not to deliver messages to you for now.  This is "
3758"useful\n"
3759"        if you're going on vacation.  Be sure to use `set delivery on' when\n"
3760"        you return from vacation!\n"
3761"\n"
3762"    set myposts on\n"
3763"    set myposts off\n"
3764"        Use `set myposts off' to not receive copies of messages you post to\n"
3765"        the list.  This has no effect if you're receiving digests.\n"
3766"\n"
3767"    set hide on\n"
3768"    set hide off\n"
3769"        Use `set hide on' to conceal your email address when people request\n"
3770"        the membership list.\n"
3771"\n"
3772"    set duplicates on\n"
3773"    set duplicates off\n"
3774"        Use `set duplicates off' if you want Mailman to not send you "
3775"messages\n"
3776"        if your address is explicitly mentioned in the To: or Cc: fields of\n"
3777"        the message.  This can reduce the number of duplicate postings you\n"
3778"        will receive.\n"
3779"\n"
3780"    set reminders on\n"
3781"    set reminders off\n"
3782"        Use `set reminders off' if you want to disable the monthly password\n"
3783"        reminder for this mailing list.\n"
3784msgstr ""
3785"\n"
3786"    set help\n"
3787"        �������� ����� ��� ���������� ��������.\n"
3788"\n"
3789"    set show [address=<address>]\n"
3790"        ����� ��� ��������� ��������� ���.  �� �������� �� ������ ��� "
3791"���������\n"
3792"        ����������� ��� ���� �� ��� ����� ����� ������������� ��� �����, "
3793"������\n"
3794"        �� ��������� �� ��� ����� ����� ������������� �� "
3795"`address=<address>'\n"
3796"        (����� ����������� ���� email ���������, ��� ����� ����������!).\n"
3797"\n"
3798"    set authenticate <password> [address=<address>]\n"
3799"        ��� �� �������� ������� ��� ��� ��������� ���, ������ �� "
3800"�������������\n"
3801"        ����� ���� ��� �������, ���� �� ��� ������ ��� ���������� ���.  �� \n"
3802"        �������� �� ������ ��� ��������� ����������� ��� ���� �� ��� ����� "
3803"�����\n"
3804"        ������������� ��� �����, ������ �� ��������� �� ��� ����� ����� "
3805"�������������\n"
3806"        �� `address=<address>' (����� ����������� ���� email ���������, ��� "
3807"����� \n"
3808"        ����������!).\n"
3809"\n"
3810"    set ack on\n"
3811"    set ack off\n"
3812"        ���� � ������� `ack' ����� ��������������, ���� ���� ��� �� �������� "
3813"��� \n"
3814"        ������ ��� ����� �� ��������� ��� ������ ������������.\n"
3815"\n"
3816"    set digest plain\n"
3817"    set digest mime\n"
3818"    set digest off\n"
3819"        ���� � ������� `digest' ����� ����������������, �� ��������� �� "
3820"��������\n"
3821"        ��� ������ �� ������ ��� ���������� ��� �����.  �������������� ��� "
3822"������� \n"
3823"        `set digest plain' �� ���� ����� ������ �� ��������� �� �������� "
3824"�������������\n"
3825"        �� plain text digest ����� (�.�. RFC 1153 digest) ��� ���� ��� "
3826"�����.\n"
3827"        ��������������� ��� ������� `set digest mime' �� ������ �� ��������� "
3828"�� ��������\n"
3829"        ������������� �� ����� MIME digest ��� ���� ��� �����.\n"
3830"\n"
3831"    set delivery on\n"
3832"    set delivery off\n"
3833"        ������������ � �������������� ��� ���������.  �� ���� ��� ������� "
3834"��� ����������� \n"
3835"        ��� �� �����, ���� � Mailman ������������ �� ��� ��������� �������� "
3836"�� ���� ���� ��\n"
3837"        �����.  ���� � ���������� ������ �� ����� ������� ���� ��������� ��� "
3838"���������\n"
3839"        ��������.  �� ������ �� ��������������� �� `set delivery on' ���� �� "
3840"�����������!\n"
3841"\n"
3842"    set myposts on\n"
3843"    set myposts off\n"
3844"        �������������� ��� ������� `set myposts off' ��� �� ��� ��������� "
3845"��������� ���\n"
3846"        ��������� ��� �������� ����� ��� �����.  ���� � ������� ��� ���� "
3847"����� �������� \n"
3848"        �� ��������� �� �������� ���� ����� ������������� (�� �� ����� "
3849"digests). \n"
3850"\n"
3851"    set hide on\n"
3852"    set hide off\n"
3853"        �������������� ��� ������� `set hide on' ��� �� ������� ��� "
3854"����������� ��� ��������� ����\n"
3855"        �� ��������� ������� ������ ���������� ��� �� ���� ��� ������.\n"
3856"\n"
3857"    set duplicates on\n"
3858"    set duplicates off\n"
3859"        ��������������� ��� ������� `set duplicates off' �� ������ � Mailman "
3860"�� ��� ���\n"
3861"        ������� �������� �� � ��������� ��� ���������� ���� ��� ����� To: � "
3862"Cc: ���\n"
3863"        ���������.  ���� � ������� ������ �� ������� ��� ������ ��� ������ "
3864"��������� ���\n"
3865"        �� ���������.\n"
3866"\n"
3867"    set reminders on\n"
3868"    set reminders off\n"
3869"        ��������������� ��� ������� `set reminders off' �� ������ �� "
3870"���������������� ���\n"
3871"        ������� ���������� ��� ������� ��� ���� �� �����.\n"
3872
3873#: Mailman/Commands/cmd_set.py:122
3874msgid "Bad set command: %(subcmd)s"
3875msgstr "���� ������ ��������: %(subcmd)s"
3876
3877#: Mailman/Commands/cmd_set.py:151
3878msgid "Your current option settings:"
3879msgstr "�� ��������� ��������� ��� �������� ���:"
3880
3881#: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191
3882#: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198
3883#: Mailman/Commands/cmd_set.py:202
3884msgid "off"
3885msgstr "����������������"
3886
3887#: Mailman/Commands/cmd_set.py:153 Mailman/Commands/cmd_set.py:191
3888#: Mailman/Commands/cmd_set.py:194 Mailman/Commands/cmd_set.py:198
3889#: Mailman/Commands/cmd_set.py:202
3890msgid "on"
3891msgstr "��������������"
3892
3893#: Mailman/Commands/cmd_set.py:154
3894msgid "    ack %(onoff)s"
3895msgstr "    ack %(onoff)s"
3896
3897#: Mailman/Commands/cmd_set.py:160
3898msgid "    digest plain"
3899msgstr "    digest plain"
3900
3901#: Mailman/Commands/cmd_set.py:162
3902msgid "    digest mime"
3903msgstr "    digest mime"
3904
3905#: Mailman/Commands/cmd_set.py:164
3906msgid "    digest off"
3907msgstr "    digest off"
3908
3909#: Mailman/Commands/cmd_set.py:169
3910msgid "delivery on"
3911msgstr "� �������� ����� ��������������"
3912
3913#: Mailman/Commands/cmd_set.py:171 Mailman/Commands/cmd_set.py:174
3914#: Mailman/Commands/cmd_set.py:177 Mailman/Commands/cmd_set.py:181
3915msgid "delivery off"
3916msgstr "� �������� ����� ����������������"
3917
3918#: Mailman/Commands/cmd_set.py:172
3919msgid "by you"
3920msgstr "��� ����"
3921
3922#: Mailman/Commands/cmd_set.py:175
3923msgid "by the admin"
3924msgstr "��� �� �����������"
3925
3926#: Mailman/Commands/cmd_set.py:178
3927msgid "due to bounces"
3928msgstr "���� ��������� ����������"
3929
3930#: Mailman/Commands/cmd_set.py:186
3931msgid "    %(status)s (%(how)s on %(date)s)"
3932msgstr "    %(status)s (%(how)s ���� %(date)s)"
3933
3934#: Mailman/Commands/cmd_set.py:192
3935msgid "    myposts %(onoff)s"
3936msgstr "    myposts %(onoff)s"
3937
3938#: Mailman/Commands/cmd_set.py:195
3939msgid "    hide %(onoff)s"
3940msgstr "    �������� %(onoff)s"
3941
3942#: Mailman/Commands/cmd_set.py:199
3943msgid "    duplicates %(onoff)s"
3944msgstr "    ����� �������� %(onoff)s"
3945
3946#: Mailman/Commands/cmd_set.py:203
3947msgid "    reminders %(onoff)s"
3948msgstr "    ������������ %(onoff)s"
3949
3950#: Mailman/Commands/cmd_set.py:224
3951msgid "You did not give the correct password"
3952msgstr "��� ������ �� ����� ������ ���������"
3953
3954#: Mailman/Commands/cmd_set.py:236 Mailman/Commands/cmd_set.py:283
3955msgid "Bad argument: %(arg)s"
3956msgstr "���������� ������: %(arg)s"
3957
3958#: Mailman/Commands/cmd_set.py:241 Mailman/Commands/cmd_set.py:261
3959msgid "Not authenticated"
3960msgstr "��� ����� ��������������"
3961
3962#: Mailman/Commands/cmd_set.py:254
3963msgid "ack option set"
3964msgstr "���� ������������� � ������� ack"
3965
3966#: Mailman/Commands/cmd_set.py:286
3967msgid "digest option set"
3968msgstr "���� ������������� � ������� digest"
3969
3970#: Mailman/Commands/cmd_set.py:301
3971msgid "delivery enabled"
3972msgstr "���� ������������� � ��������"
3973
3974#: Mailman/Commands/cmd_set.py:304
3975msgid "delivery disabled by user"
3976msgstr "���� ��������������� � ��������"
3977
3978#: Mailman/Commands/cmd_set.py:316
3979msgid "myposts option set"
3980msgstr "���� ������������� � ������� myposts"
3981
3982#: Mailman/Commands/cmd_set.py:327
3983msgid "hide option set"
3984msgstr "���� ������������� � ������� ��������"
3985
3986#: Mailman/Commands/cmd_set.py:339
3987msgid "duplicates option set"
3988msgstr "���� ������������� � ������� ��� �� ����� ��������"
3989
3990#: Mailman/Commands/cmd_set.py:351
3991msgid "reminder option set"
3992msgstr "���� ������������� � ����������"
3993
3994#: Mailman/Commands/cmd_stop.py:17
3995msgid "stop is synonymous with the end command.\n"
3996msgstr "� ������� stop ����� �������� �� ��� ������ �����.\n"
3997
3998#: Mailman/Commands/cmd_subscribe.py:17
3999msgid ""
4000"\n"
4001"    subscribe [password] [digest|nodigest] [address=<address>]\n"
4002"        Subscribe to this mailing list.  Your password must be given to\n"
4003"        unsubscribe or change your options, but if you omit the password, "
4004"one\n"
4005"        will be generated for you.  You may be periodically reminded of "
4006"your\n"
4007"        password.\n"
4008"\n"
4009"        The next argument may be either: `nodigest' or `digest' (no "
4010"quotes!).\n"
4011"        If you wish to subscribe an address other than the address you sent\n"
4012"        this request from, you may specify `address=<address>' (no brackets\n"
4013"        around the email address, and no quotes!)\n"
4014msgstr ""
4015"\n"
4016"    subscribe [password] [digest|nodigest] [address=<address>]\n"
4017"        ������� �� ���� �� ����� ������������ ������������.  ������ �� ����� "
4018"�\n"
4019"        ������� ��� ��� �� �������� ��� �� ����� � ��� ��� ������ ��� "
4020"��������� ���.\n"
4021"        �� ����������� ��� ������, �� �������� ������� ��� ���������� ���. "
4022"������ ��\n"
4023"        ��������� ���������� ������������ ��� ������� ���.\n"
4024"\n"
4025"        � ������� ������� ������ �� ����� ����: `nodigest' � `digest' (����� "
4026"����������!).\n"
4027"        �� ������ �� ���������� �� ��� ��������� � ����� ����� ����������� "
4028"��� ���� �� ���\n"
4029"        ����� �������� ���� �� �����, �������� �� ������� "
4030"`address=<address>' (������� ����������\n"
4031"        ���� ��� ��� email ���������, ��� ������� ����� ��������!)\n"
4032
4033#: Mailman/Commands/cmd_subscribe.py:62
4034msgid "Bad digest specifier: %(arg)s"
4035msgstr "���������� ������� ��� ��� ������� digest: %(arg)s"
4036
4037#: Mailman/Commands/cmd_subscribe.py:92
4038msgid "No valid address found to subscribe"
4039msgstr "�� ������� ������ ��������� ��� �������"
4040
4041#: Mailman/Commands/cmd_subscribe.py:113
4042msgid ""
4043"The email address you supplied is banned from this mailing list.\n"
4044"If you think this restriction is erroneous, please contact the list\n"
4045"owners at %(listowner)s."
4046msgstr ""
4047"� ����������� ��������� ��� ������ ����� ������������ ��� �� �����.\n"
4048"�� �������� ��� � ����������� ����� �����������, �������� �������������\n"
4049"�� ��� ���������� ��� ������ ��� %(listowner)s."
4050
4051#: Mailman/Commands/cmd_subscribe.py:119
4052msgid ""
4053"Mailman won't accept the given email address as a valid address.\n"
4054"(E.g. it must have an @ in it.)"
4055msgstr ""
4056"� Mailman �� ������� ���� �� ��������� �� ������ ���������.\n"
4057"(�.�. ������ �� ������� ��� @.)"
4058
4059#: Mailman/Commands/cmd_subscribe.py:124
4060msgid ""
4061"Your subscription is not allowed because\n"
4062"the email address you gave is insecure."
4063msgstr ""
4064"� ������� ��� ��� ����������� ������ �\n"
4065"��������� ��� ������ ��� ����� �������."
4066
4067#: Mailman/Commands/cmd_subscribe.py:129
4068msgid "You are already subscribed!"
4069msgstr "����� ��� �������������!"
4070
4071#: Mailman/Commands/cmd_subscribe.py:137
4072msgid "No one can subscribe to the digest of this list!"
4073msgstr ""
4074"������� �� ������ �� �������� ��� �� �������� digests ����� ��� ������!"
4075
4076#: Mailman/Commands/cmd_subscribe.py:140
4077msgid "This list only supports digest subscriptions!"
4078msgstr "���� � ����� ����������� �������� ���� ��� �� ���� digests!"
4079
4080#: Mailman/Commands/cmd_subscribe.py:146
4081msgid ""
4082"Your subscription request has been forwarded to the list administrator\n"
4083"at %(listowner)s for review."
4084msgstr ""
4085"�� ������ ��� ��� ������� ���� ��������� ��� ����������� ��� ������\n"
4086"��� %(listowner)s ��� �������."
4087
4088#: Mailman/Commands/cmd_subscribe.py:151
4089msgid "Subscription request succeeded."
4090msgstr "�� ������ �������� ������������ �� ��������."
4091
4092#: Mailman/Commands/cmd_unsubscribe.py:17
4093msgid ""
4094"\n"
4095"    unsubscribe [password] [address=<address>]\n"
4096"        Unsubscribe from the mailing list.  If given, your password must "
4097"match\n"
4098"        your current password.  If omitted, a confirmation email will be "
4099"sent\n"
4100"        to the unsubscribing address. If you wish to unsubscribe an address\n"
4101"        other than the address you sent this request from, you may specify\n"
4102"        `address=<address>' (no brackets around the email address, and no\n"
4103"        quotes!)\n"
4104msgstr ""
4105"\n"
4106"    unsubscribe [password] [address=<address>]\n"
4107"        �������� ��� �� �����.  �� �������, � ������� ��� ������ �� "
4108"���������\n"
4109"        �� ��� �������� ������ ���.  �� ������������, �� ������ ��� ������\n"
4110"        ������������ ��� ��������� ��� �������� �� ��������� ��� �� �����. "
4111"��\n"
4112"        ������ �� ���������� ���� ��������� ��� ���� ��� ��� ����� �������� "
4113"��\n"
4114"        ������ ���, �������� �� ������� `address=<address>' (����� �� "
4115"�������\n"
4116"        '<,>' ���� ��� ��� email ���������, ��� ����� �� ����������!)\n"
4117
4118#: Mailman/Commands/cmd_unsubscribe.py:62
4119msgid "%(address)s is not a member of the %(listname)s mailing list"
4120msgstr "� ��������� %(address)s ��� ����� ����� ��� %(listname)s ������"
4121
4122#: Mailman/Commands/cmd_unsubscribe.py:69
4123msgid ""
4124"Your unsubscription request has been forwarded to the list administrator "
4125"for\n"
4126"approval."
4127msgstr ""
4128"�� ������ ��� ��� �������� ���� ��������� ��� ����������� ��� ������\n"
4129"��� �������."
4130
4131#: Mailman/Commands/cmd_unsubscribe.py:89
4132msgid "You gave the wrong password"
4133msgstr "������ ���������� ������"
4134
4135#: Mailman/Commands/cmd_unsubscribe.py:92
4136msgid "Unsubscription request succeeded."
4137msgstr "�� ������ ��� �������� ������������ �� ��������."
4138
4139#: Mailman/Commands/cmd_who.py:27
4140msgid ""
4141"\n"
4142"    who\n"
4143"        See the non-hidden members of this mailing list.\n"
4144"    who password\n"
4145"        See everyone who is on this mailing list. The password is the\n"
4146"        list's admin or moderator password.\n"
4147msgstr ""
4148"\n"
4149"    who\n"
4150"        ����� �� �� �������� ����  ����� ��� ������. \n"
4151"    who password\n"
4152"      ����� ����� ����� ����� �� ���� �� �����. � ������� ��������� ����� �\n"
4153"      ������� ��� ����������� � ���������� ��� ������.\n"
4154
4155#: Mailman/Commands/cmd_who.py:35
4156msgid ""
4157"\n"
4158"    who password [address=<address>]\n"
4159"        See the non-hidden members of this mailing list.  The roster is\n"
4160"        limited to list members only, and you must supply your membership\n"
4161"        password to retrieve it.  If you're posting from an address other\n"
4162"        than your membership address, specify your membership address with\n"
4163"        `address=<address>' (no brackets around the email address, and no\n"
4164"        quotes!). If you provide the list's admin or moderator password,\n"
4165"        hidden members will be included.\n"
4166msgstr ""
4167"\n"
4168"    who password [address=<address>]\n"
4169"        ����� ����� ���� �������������� �� ���� �� �����.  � ���������\n"
4170"        ������������ ���� ��� ���� ��� ������, ��� ������ �� ������ ��� "
4171"������\n"
4172"        ��� ��� �� ��� �����.  �� �������� ������ ��� ����������� ��������� "
4173"���\n"
4174"        ���� �� ��� ����� ����� ������������� ��� �����, ������ �� ��������� "
4175"��\n"
4176"        ��� ����� ����� ������������� �� `address=<address>' (����� �� "
4177"�������\n"
4178"        '<,>' ���� ��� ��� email ���������, ��� ����� �� ����������!)\n"
4179
4180#: Mailman/Commands/cmd_who.py:46
4181msgid ""
4182"\n"
4183"    who password\n"
4184"        See everyone who is on this mailing list.  The roster is limited to\n"
4185"        list administrators and moderators only; you must supply the list\n"
4186"        admin or moderator password to retrieve the roster.\n"
4187msgstr ""
4188"\n"
4189"    who password\n"
4190"        ����� ����� ���� �������������� �� ���� �� �����.  � ���������\n"
4191"        ������������ ���� ����� ������������ ��� ������ ��� ���� "
4192"�����������.\n"
4193"        ������ �� ������ ��� ������ ��� ����������� ��� ������ � ��� ������ "
4194"���\n"
4195"        ���������� ��� �� ������ ��� ��������.\n"
4196
4197#: Mailman/Commands/cmd_who.py:128
4198msgid "You are not allowed to retrieve the list membership."
4199msgstr "��� ����� �� �������� �� ����� �� ���� ��� ������."
4200
4201#: Mailman/Commands/cmd_who.py:134
4202msgid "This list has no members."
4203msgstr "� ����� ��� ���� ����."
4204
4205#: Mailman/Commands/cmd_who.py:148
4206msgid "Non-digest (regular) members:"
4207msgstr "�������� (non-digest) ����:"
4208
4209#: Mailman/Commands/cmd_who.py:151
4210msgid "Digest members:"
4211msgstr "���� �� ����� ��������� �� �������� ��� ������ �������������:"
4212
4213#: Mailman/Defaults.py:1802
4214msgid "Arabic"
4215msgstr "�������"
4216
4217#: Mailman/Defaults.py:1803
4218msgid "Asturian"
4219msgstr "��������"
4220
4221#: Mailman/Defaults.py:1804
4222msgid "Catalan"
4223msgstr "����������"
4224
4225#: Mailman/Defaults.py:1805
4226msgid "Czech"
4227msgstr "�������"
4228
4229#: Mailman/Defaults.py:1806
4230msgid "Danish"
4231msgstr "��������"
4232
4233#: Mailman/Defaults.py:1807
4234msgid "German"
4235msgstr "���������"
4236
4237#: Mailman/Defaults.py:1808
4238msgid "English (USA)"
4239msgstr "������� (���)"
4240
4241#: Mailman/Defaults.py:1809
4242msgid "Esperanto"
4243msgstr ""
4244
4245#: Mailman/Defaults.py:1810
4246msgid "Spanish (Spain)"
4247msgstr "�������� (�������)"
4248
4249#: Mailman/Defaults.py:1811
4250msgid "Estonian"
4251msgstr "��������"
4252
4253#: Mailman/Defaults.py:1812
4254msgid "Euskara"
4255msgstr "�������"
4256
4257#: Mailman/Defaults.py:1813
4258msgid "Persian"
4259msgstr ""
4260
4261#: Mailman/Defaults.py:1814
4262msgid "Finnish"
4263msgstr "���������"
4264
4265#: Mailman/Defaults.py:1815
4266msgid "French"
4267msgstr "�������"
4268
4269#: Mailman/Defaults.py:1816
4270msgid "Galician"
4271msgstr "��������"
4272
4273#: Mailman/Defaults.py:1817
4274msgid "Greek"
4275msgstr ""
4276
4277#: Mailman/Defaults.py:1818
4278msgid "Hebrew"
4279msgstr "�������"
4280
4281#: Mailman/Defaults.py:1819
4282msgid "Croatian"
4283msgstr "��������"
4284
4285#: Mailman/Defaults.py:1820
4286msgid "Hungarian"
4287msgstr "���������"
4288
4289#: Mailman/Defaults.py:1821
4290msgid "Interlingua"
4291msgstr "�����������"
4292
4293#: Mailman/Defaults.py:1822
4294msgid "Italian"
4295msgstr "�������"
4296
4297#: Mailman/Defaults.py:1823
4298msgid "Japanese"
4299msgstr "��������"
4300
4301#: Mailman/Defaults.py:1824
4302msgid "Korean"
4303msgstr "���������"
4304
4305#: Mailman/Defaults.py:1825
4306msgid "Lithuanian"
4307msgstr "����������"
4308
4309#: Mailman/Defaults.py:1826
4310msgid "Dutch"
4311msgstr "���������"
4312
4313#: Mailman/Defaults.py:1827
4314msgid "Norwegian"
4315msgstr "���������"
4316
4317#: Mailman/Defaults.py:1828
4318msgid "Polish"
4319msgstr "��������"
4320
4321#: Mailman/Defaults.py:1829
4322msgid "Portuguese"
4323msgstr "�����������"
4324
4325#: Mailman/Defaults.py:1830
4326msgid "Portuguese (Brazil)"
4327msgstr "����������� (��������)"
4328
4329#: Mailman/Defaults.py:1831
4330msgid "Romanian"
4331msgstr "���������"
4332
4333#: Mailman/Defaults.py:1832
4334msgid "Russian"
4335msgstr "������"
4336
4337#: Mailman/Defaults.py:1833
4338msgid "Slovak"
4339msgstr "���������"
4340
4341#: Mailman/Defaults.py:1834
4342msgid "Slovenian"
4343msgstr "���������"
4344
4345#: Mailman/Defaults.py:1835
4346msgid "Serbian"
4347msgstr "�������"
4348
4349#: Mailman/Defaults.py:1836
4350msgid "Swedish"
4351msgstr "��������"
4352
4353#: Mailman/Defaults.py:1837
4354msgid "Turkish"
4355msgstr "��������"
4356
4357#: Mailman/Defaults.py:1838
4358msgid "Ukrainian"
4359msgstr "���������"
4360
4361#: Mailman/Defaults.py:1839
4362msgid "Vietnamese"
4363msgstr "������������"
4364
4365#: Mailman/Defaults.py:1840
4366msgid "Chinese (China)"
4367msgstr "�������� (����)"
4368
4369#: Mailman/Defaults.py:1841
4370msgid "Chinese (Taiwan)"
4371msgstr "�������� (������)"
4372
4373#: Mailman/Deliverer.py:53
4374msgid ""
4375"Note: Since this is a list of mailing lists, administrative\n"
4376"notices like the password reminder will be sent to\n"
4377"your membership administrative address, %(addr)s."
4378msgstr ""
4379"��������: ���� ���� ����� ��� ����� ��� ������ ������������\n"
4380"������������, �� ������������� ���������� ���� ����� �� \n"
4381"������������ ������� �� ���������� ���� ������������� ���\n"
4382"���������, %(addr)s."
4383
4384#: Mailman/Deliverer.py:73
4385msgid " (Digest mode)"
4386msgstr " (Digest mode)"
4387
4388#: Mailman/Deliverer.py:79
4389msgid "Welcome to the \"%(realname)s\" mailing list%(digmode)s"
4390msgstr ""
4391"����� ������ ��� ����� ������������ ������������ \"%(realname)s\" %(digmode)s"
4392
4393#: Mailman/Deliverer.py:89
4394msgid "You have been unsubscribed from the %(realname)s mailing list"
4395msgstr "����� ��������� ��� ��� %(realname)s ����� ������������ ������������"
4396
4397#: Mailman/Deliverer.py:116
4398msgid "%(listfullname)s mailing list reminder"
4399msgstr "%(listfullname)s ���������� ������"
4400
4401#: Mailman/Deliverer.py:144
4402msgid "No reason given"
4403msgstr "�� ������� �����"
4404
4405#: Mailman/Deliverer.py:168 Mailman/Deliverer.py:187
4406msgid "Hostile subscription attempt detected"
4407msgstr "����������� ���������� �������� ��������"
4408
4409#: Mailman/Deliverer.py:169
4410msgid ""
4411"%(address)s was invited to a different mailing\n"
4412"list, but in a deliberate malicious attempt they tried to confirm the\n"
4413"invitation to your list.  We just thought you'd like to know.  No further\n"
4414"action by you is required."
4415msgstr ""
4416"� ��������� %(address)s ���� ���������� �� ���� �����, ������ ������ ���\n"
4417"��������� ��������� �������� �� ������ ����������� �������� ��� �� ����\n"
4418"��� �����.  ���������� ��� �� ������ �� �� ������.  �� ���������� �� \n"
4419"����������� �� ��������� ���������."
4420
4421#: Mailman/Deliverer.py:188
4422msgid ""
4423"You invited %(address)s to your list, but in a\n"
4424"deliberate malicious attempt, they tried to confirm the invitation to a\n"
4425"different list.  We just thought you'd like to know.  No further action by "
4426"you\n"
4427"is required."
4428msgstr ""
4429"������������ ��� ��������� %(address)s ��� ����� ���, ������ ������ ���\n"
4430"��������� ��������� �������� �� ������ ����������� �������� ��� ��� ����\n"
4431"�����.  ���������� ��� �� ������ �� �� ������.  �� ���������� �� \n"
4432"����������� �� ��������� ���������."
4433
4434#: Mailman/Deliverer.py:221
4435msgid "%(listname)s mailing list probe message"
4436msgstr "������ ������� ������ ������������� %(listname)s"
4437
4438#: Mailman/Errors.py:123
4439msgid "For some unknown reason"
4440msgstr "��� ������ ������� ����"
4441
4442#: Mailman/Errors.py:129 Mailman/Errors.py:152
4443msgid "Your message was rejected"
4444msgstr "�� ������ ��� �����������"
4445
4446#: Mailman/Gui/Archive.py:25
4447msgid "Archiving Options"
4448msgstr "�������� ���������"
4449
4450#: Mailman/Gui/Archive.py:31
4451msgid "List traffic archival policies."
4452msgstr "��������� ������������� ��� ������� ��� ������."
4453
4454#: Mailman/Gui/Archive.py:34
4455msgid "Archive messages?"
4456msgstr "������������ ��� ���������;"
4457
4458#: Mailman/Gui/Archive.py:36
4459msgid "private"
4460msgstr "��������"
4461
4462#: Mailman/Gui/Archive.py:36
4463msgid "public"
4464msgstr "�������"
4465
4466#: Mailman/Gui/Archive.py:37
4467msgid "Is archive file source for public or private archival?"
4468msgstr ""
4469"�� �������� ������ ��� ��������� ������������ ��� ������� � �������� "
4470"������������;"
4471
4472#: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78
4473msgid "Monthly"
4474msgstr "�������"
4475
4476#: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78
4477msgid "Quarterly"
4478msgstr "����������"
4479
4480#: Mailman/Gui/Archive.py:40 Mailman/Gui/Digest.py:78
4481msgid "Yearly"
4482msgstr "������"
4483
4484#: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79
4485msgid "Daily"
4486msgstr "��������"
4487
4488#: Mailman/Gui/Archive.py:41 Mailman/Gui/Digest.py:79
4489msgid "Weekly"
4490msgstr "�����������"
4491
4492#: Mailman/Gui/Archive.py:43
4493msgid "How often should a new archive volume be started?"
4494msgstr "���� ����� ������ �� ������ ���� ����� ��� �������;"
4495
4496#: Mailman/Gui/Autoresponse.py:31
4497msgid "Auto-responder"
4498msgstr "�������� ��������"
4499
4500#: Mailman/Gui/Autoresponse.py:39
4501msgid ""
4502"Auto-responder characteristics.<p>\n"
4503"\n"
4504"In the text fields below, string interpolation is performed with\n"
4505"the following key/value substitutions:\n"
4506"<p><ul>\n"
4507"    <li><b>listname</b> - <em>gets the name of the mailing list</em>\n"
4508"    <li><b>listurl</b> - <em>gets the list's listinfo URL</em>\n"
4509"    <li><b>requestemail</b> - <em>gets the list's -request address</em>\n"
4510"    <li><b>owneremail</b> - <em>gets the list's -owner address</em>\n"
4511"</ul>\n"
4512"\n"
4513"<p>For each text field, you can either enter the text directly into the "
4514"text\n"
4515"box, or you can specify a file on your local system to upload as the text."
4516msgstr ""
4517"�������������� ��������� ���������.<p>\n"
4518"\n"
4519"��� �������� �����, � ��������� ���� ��������� ��� ���������� ������� ��\n"
4520"��� ��������� ��������������� ��������/�����:\n"
4521"<p><ul>\n"
4522"    <li><b>listname</b> - <em>�� ����� ��� ������</em>\n"
4523"    <li><b>listurl</b> - <em>� ��������� ����� ��� ������� ����������� ��� "
4524"�� �����</em>\n"
4525"    <li><b>requestemail</b> - <em>�� ������ ���������� ��� ������</em>\n"
4526"    <li><b>owneremail</b> - <em>� ��������� ��� ��������� ��� ������</em>\n"
4527"</ul>\n"
4528"\n"
4529"<p>��� ���� �����, �������� ���� �� �������� �� ������� ���������� ���� ���\n"
4530"���������� ������� ��������, � �������� �� ������� ��� ������ ��� ������ ��� "
4531"�������\n"
4532"��� �� ����� �� ����� �� ������� ��� ��������."
4533
4534#: Mailman/Gui/Autoresponse.py:55
4535msgid ""
4536"Should Mailman send an auto-response to mailing list\n"
4537"             posters?"
4538msgstr ""
4539"������ �� ������� � Mailman �������� �������� ����� �������\n"
4540"             ��� ������;"
4541
4542#: Mailman/Gui/Autoresponse.py:60
4543msgid "Auto-response text to send to mailing list posters."
4544msgstr "�� ������� ��� �� ��������� ����� ������� ��� ������."
4545
4546#: Mailman/Gui/Autoresponse.py:63
4547msgid ""
4548"Should Mailman send an auto-response to emails sent to the\n"
4549"             -owner address?"
4550msgstr ""
4551"������ �� ������� � Mailman �������� �������� ��� �������� ��� ���������� "
4552"���\n"
4553"             ��������� ��� ��������� ��� ������;"
4554
4555#: Mailman/Gui/Autoresponse.py:68
4556msgid "Auto-response text to send to -owner emails."
4557msgstr ""
4558"�� ������� ��� �� ��������� �� �������� �� �������� ���� ��� ��������� ��� "
4559"������."
4560
4561#: Mailman/Gui/Autoresponse.py:71
4562msgid "Yes, w/discard"
4563msgstr "���, �������� ����� ���������"
4564
4565#: Mailman/Gui/Autoresponse.py:71
4566msgid "Yes, w/forward"
4567msgstr "���, ��������"
4568
4569#: Mailman/Gui/Autoresponse.py:72
4570msgid ""
4571"Should Mailman send an auto-response to emails sent to the\n"
4572"             -request address?  If you choose yes, decide whether you want\n"
4573"             Mailman to discard the original email, or forward it on to the\n"
4574"             system as a normal mail command."
4575msgstr ""
4576"������ � Mailman �� ������� �������� �������� ��� �������� ��� ���������� "
4577"���\n"
4578"             ��������� ���������;  �� ��������� ���, ����������\n"
4579"             �� ������ � Mailman �� ���������� ����� ��������� �� ������ "
4580"������, � �� �� ������� ���\n"
4581"             ������� �� �������� ������ mail."
4582
4583#: Mailman/Gui/Autoresponse.py:79
4584msgid "Auto-response text to send to -request emails."
4585msgstr "������� ��������� ��������� ��� �������� ���������."
4586
4587#: Mailman/Gui/Autoresponse.py:82
4588msgid ""
4589"Number of days between auto-responses to either the mailing\n"
4590"             list or -request/-owner address from the same poster.  Set to\n"
4591"             zero (or negative) for no grace period (i.e. auto-respond to\n"
4592"             every message)."
4593msgstr ""
4594"������� ��� ������ ������� ���� ��������� ���������� ���� \n"
4595"             ��� ���� ���������.  �� ������� ����� � �������� ��� �� ���\n"
4596"             ������� �������� ������� (�.�. �������� �������� �� ���� "
4597"������)."
4598
4599#: Mailman/Gui/Bounce.py:26
4600msgid "Bounce processing"
4601msgstr "����������� �������������� ���������"
4602
4603#: Mailman/Gui/Bounce.py:32
4604msgid ""
4605"These policies control the automatic bounce processing system\n"
4606"            in Mailman.  Here's an overview of how it works.\n"
4607"\n"
4608"            <p>When a bounce is received, Mailman tries to extract two "
4609"pieces\n"
4610"            of information from the message: the address of the member the\n"
4611"            message was intended for, and the severity of the problem "
4612"causing\n"
4613"            the bounce.  The severity can be either <em>hard</em> or\n"
4614"            <em>soft</em> meaning either a fatal error occurred, or a\n"
4615"            transient error occurred.  When in doubt, a hard severity is "
4616"used.\n"
4617"\n"
4618"            <p>If no member address can be extracted from the bounce, then "
4619"the\n"
4620"            bounce is usually discarded.  Otherwise, each member is assigned "
4621"a\n"
4622"            <em>bounce score</em> and every time we encounter a bounce from\n"
4623"            this member we increment the score.  Hard bounces increment by "
4624"1\n"
4625"            while soft bounces increment by 0.5.  We only increment the "
4626"bounce\n"
4627"            score once per day, so even if we receive ten hard bounces from "
4628"a\n"
4629"            member per day, their score will increase by only 1 for that "
4630"day.\n"
4631"\n"
4632"            <p>When a member's bounce score is greater than the\n"
4633"            <a href=\"?VARHELP=bounce/bounce_score_threshold\">bounce score\n"
4634"            threshold</a>, the subscription is disabled.  Once disabled, "
4635"the\n"
4636"            member will not receive any postings from the list until their\n"
4637"            membership is explicitly re-enabled (either by the list\n"
4638"            administrator or the user).  However, they will receive "
4639"occasional\n"
4640"            reminders that their membership has been disabled, and these\n"
4641"            reminders will include information about how to re-enable their\n"
4642"            membership.\n"
4643"\n"
4644"            <p>You can control both the\n"
4645"            <a href=\"?VARHELP=bounce/bounce_you_are_disabled_warnings"
4646"\">number\n"
4647"            of reminders</a> the member will receive and the\n"
4648"            <a href=\"?VARHELP=bounce/"
4649"bounce_you_are_disabled_warnings_interval\"\n"
4650"            >frequency</a> with which these reminders are sent.\n"
4651"\n"
4652"            <p>There is one other important configuration variable; after a\n"
4653"            certain period of time -- during which no bounces from the "
4654"member\n"
4655"            are received -- the bounce information is\n"
4656"            <a href=\"?VARHELP=bounce/bounce_info_stale_after\">considered\n"
4657"            stale</a> and discarded.  Thus by adjusting this value, and the\n"
4658"            score threshold, you can control how quickly bouncing members "
4659"are\n"
4660"            disabled.  You should tune both of these to the frequency and\n"
4661"            traffic volume of your list."
4662msgstr ""
4663"���� � �������� ������� �� ������� ������������ ��� �������������� "
4664"���������\n"
4665"            ��� Mailman.  ��������� ��� �������� ��� ��� �������� �� "
4666"�������.\n"
4667"\n"
4668"            <p>���� ��������� ��� ������������� ������, � Mailman ��������� "
4669"�� ������\n"
4670"            ��� ����������� ��� �� ������: �� ��������� ��� ������ ��� �� "
4671"�����\n"
4672"            ����������� �� ������, ��� ��� ���������� ��� ����������� ��� "
4673"��������\n"
4674"            �� ������������� ������.  � ���������� ��� ����������� ������ �� "
4675"����� <em>������</em> �\n"
4676"            <em>�����</em> �� ��� ������ ��� ��������� ��� ������ � �������� "
4677"�����.\n"
4678"            ���� ��� ����� ������� � ������ ��� ����������� ��� �����������, "
4679"���������\n"
4680"            ��� �� �������� ����� ������.\n"
4681"\n"
4682"            <p>�� ��� �� ������������� ������ ��� ������ �� ������� � "
4683"���������\n"
4684"            ��� ������, ���� �� ������ ������������ ����� �� ��������� "
4685"���������.  �����������,\n"
4686"            �� ���� ����� ���������� ��� <em>���� �������������� ���������</"
4687"em> ��� ���� ���� ��� ��������� ���\n"
4688"            ������������� ������ ��� ���� �� ����� ��������� �� ����.  �� "
4689"������� ������������� �������� �������� �� \n"
4690"            ������� ���� 1 ��� �� ��������� ������������� �������� �������� "
4691"�� ������� ���� 0.5.  � ��������, ���\n"
4692"            ����, ��������� ���� ��� ���� ��� ���� �����, ���� ����� ��� �� "
4693"������� 10\n"
4694"            ������� ������������� �������� ��� ��� ����� ���� ���� ���� "
4695"����, � �������� �� ������� ���� ���� 1\n"
4696"            ��� ���� �� ����.\n"
4697"\n"
4698"            <p>���� �� ���� �������������� ��������� ������� ������ ����� "
4699"���������� ��� ��\n"
4700"            <a href=\"?VARHELP=bounce/bounce_score_threshold\">����</a>,\n"
4701"            � ������� ����������������.  ��� ���� �� ������, �� �����\n"
4702"            �� �������� �������� ��� �� ����� ����� � ������� ��� �� �����-\n"
4703"            ������������� ���� (���� ��� �� ����������� ��� ������ ���� ��� "
4704"�� ������).\n"
4705"            ������, � ������� �� �������� ���������� ������������ ��� � "
4706"�������\n"
4707"            ��� ���� ���������������, ��� ����� �� ������������ �� "
4708"�������������\n"
4709"            ��� ���������� ��� �� ��� ������ �� ������������� ���� � "
4710"�������.\n"
4711"\n"
4712"            <p>�������� �� ��������� ���� ���\n"
4713"            <a href=\"?VARHELP=bounce/bounce_you_are_disabled_warnings"
4714"\">������\n"
4715"            ��� ������������</a> ��� �� �������� �� ����� ��� ��� ���\n"
4716"            <a href=\"?VARHELP=bounce/"
4717"bounce_you_are_disabled_warnings_interval\">���������</a> \n"
4718"           �� ��� ����� �� ���������� �� ������������.\n"
4719"\n"
4720"            <p>������� ��� ����� ��������� ��������� ��� ������ �� "
4721"�����������. ����\n"
4722"            ��� ��� ������������ ������� ������� -- ���� �� �������� ��� "
4723"������ ���\n"
4724"            ����� ���������� �������� ��� �� ����� -- � ���������� ��� �� "
4725"������������� ��������\n"
4726"            <a href=\"?VARHELP=bounce/bounce_info_stale_after\">��������� "
4727"�����������</a>\n"
4728"            ��� ������������.  �������� �� �� ������� ����� ��� �����, ��� "
4729"��� ����� ���\n"
4730"            ���� �������������� ���������, ������ �� �������� ���� ������� "
4731"����������������� �� ���� ���\n"
4732"            ������ �� �������� �������������.  �� ������ �� ��������� ��� "
4733"��� ��� �����\n"
4734"            ����������� ������� �� �� ��������� ��� ��� ������ ��� ������ "
4735"���."
4736
4737#: Mailman/Gui/Bounce.py:75
4738msgid "Bounce detection sensitivity"
4739msgstr "���������� ���� ��������� ��������� ����������"
4740
4741#: Mailman/Gui/Bounce.py:78
4742msgid "Should Mailman perform automatic bounce processing?"
4743msgstr ""
4744"������ � Mailman �� ������� �� �������� ����������� ��� ��������� ����������;"
4745
4746#: Mailman/Gui/Bounce.py:79
4747msgid ""
4748"By setting this value to <em>No</em>, you disable all\n"
4749"             automatic bounce processing for this list, however bounce\n"
4750"             messages will still be discarded so that the list "
4751"administrator\n"
4752"             isn't inundated with them."
4753msgstr ""
4754"�������� ��� ��� ���� <em>���</em>, ��������������� ���\n"
4755"             �������� ����������� ��� �������������� ��������� ��� ���� �� "
4756"�����,\n"
4757"             ������ �� ������������� �������� �� ������������� ����� "
4758"��������� ���� �� ��� \n"
4759"             ������������ ��� ���� � ������������ ��� ������."
4760
4761#: Mailman/Gui/Bounce.py:85
4762msgid ""
4763"The maximum member bounce score before the member's\n"
4764"             subscription is disabled.  This value can be a floating point\n"
4765"             number."
4766msgstr ""
4767"�� ������� ���� ������ ���� � ������� ��� \n"
4768"             ���������������.  ���� � ���� ������ �� ����� ���������\n"
4769"             �������."
4770
4771#: Mailman/Gui/Bounce.py:88
4772msgid ""
4773"Each subscriber is assigned a bounce score, as a floating\n"
4774"             point number.  Whenever Mailman receives a bounce from a list\n"
4775"             member, that member's score is incremented.  Hard bounces "
4776"(fatal\n"
4777"             errors) increase the score by 1, while soft bounces (temporary\n"
4778"             errors) increase the score by 0.5.  Only one bounce per day\n"
4779"             counts against a member's score, so even if 10 bounces are\n"
4780"             received for a member on the same day, their score will "
4781"increase\n"
4782"             by just 1.\n"
4783"\n"
4784"             This variable describes the upper limit for a member's bounce\n"
4785"             score, above which they are automatically disabled, but not\n"
4786"             removed from the mailing list."
4787msgstr ""
4788"���� ������� ���� ���� ������������ ������ �������������� ���������, ���� "
4789"���� �����������\n"
4790"             �������. ���� ���� ��� � Mailman �������� ��� ������������� "
4791"������ ��� ������ ����� ��� ������,\n"
4792"             �� ���������� ��� ������������� ������ �������.  ��� �������\n"
4793"             �������� ��������� �� ���������� ���� 1, ��� ��� ���������\n"
4794"             �������� ��������� �� ���������� ���� 0.5. ���� ��� "
4795"������������� ������ ��� �����\n"
4796"             ������� �� ���������� ��� �������������� ��������� ���� ������, "
4797"���� ���� �� 10 ������������� �������� \n"
4798"             ������� ��� ��� ����� ��� ���� �����, �� ���������� ��� �� "
4799"�������\n"
4800"             ���� 1.\n"
4801"\n"
4802"             ���� � ��������� ���������� �� ������� ���� ������������� "
4803"�������������� ��������� ���� ������,\n"
4804"             ����� ��� �� ����� �������� �������� ����� �����������, ���� "
4805"���\n"
4806"             ������������ ��� ��� �����."
4807
4808#: Mailman/Gui/Bounce.py:102
4809msgid ""
4810"The number of days after which a member's bounce information\n"
4811"             is discarded, if no new bounces have been received in the\n"
4812"             interim.  This value must be an integer."
4813msgstr ""
4814"� ������� ��� ������ ���� ��� ��� ������ � ���������� ��� �������������� "
4815"��������� ���� ������\n"
4816"             ���� ���������� ����� ���������, �� ������ ������������� ������ "
4817"��� ���� ���������� ���\n"
4818"             ������������.  � ���� ������ �� ����� �������� �������."
4819
4820#: Mailman/Gui/Bounce.py:107
4821msgid ""
4822"How many <em>Your Membership Is Disabled</em> warnings a\n"
4823"             disabled member should get before their address is removed "
4824"from\n"
4825"             the mailing list.  Set to 0 to immediately remove an address "
4826"from\n"
4827"             the list once their bounce score exceeds the threshold.  This\n"
4828"             value must be an integer."
4829msgstr ""
4830"����� ��������������� <em>� ������� ��� ����� ����������������</em>\n"
4831"             �� ������ ��� ���������������� ����� �� ����� ���� � ��������� "
4832"��� ��������� ���\n"
4833"             ��� �����. ������ 0 ��� �� ��������� � ��������� ����� ���\n"
4834"             ��� ����� ����� �� ���������� ��� �������������� ��������� "
4835"������� �� ������� ����. � \n"
4836"             ���� ������ �� ����� �������� �������."
4837
4838#: Mailman/Gui/Bounce.py:114
4839msgid ""
4840"The number of days between sending the <em>Your Membership\n"
4841"             Is Disabled</em> warnings.  This value must be an integer."
4842msgstr ""
4843"� ������� ��� ������ ������� ���� �������� ��� �����������:\n"
4844"             <em>� ������� ��� ���� ���������������</em> .  ���� � ����\n"
4845"             ������ �� ����� ��������."
4846
4847#: Mailman/Gui/Bounce.py:117 Mailman/Gui/General.py:332
4848msgid "Notifications"
4849msgstr "������������"
4850
4851#: Mailman/Gui/Bounce.py:121
4852msgid ""
4853"Should Mailman send you, the list owner, any bounce messages\n"
4854"             that failed to be detected by the bounce processor?  <em>Yes</"
4855"em>\n"
4856"             is recommended."
4857msgstr ""
4858"������ � Mailman �� ������� �� ����, ��� ��������� ��� ������, ���� "
4859"������������� ������\n"
4860"             �� ����� ��� ����������� ��� �� ������� ������������ ��� "
4861"�������������� ���������;\n"
4862"             ����������� �� <em>���</em>."
4863
4864#: Mailman/Gui/Bounce.py:124
4865msgid ""
4866"While Mailman's bounce detector is fairly robust, it's\n"
4867"             impossible to detect every bounce format in the world.  You\n"
4868"             should keep this variable set to <em>Yes</em> for two reasons: "
4869"1)\n"
4870"             If this really is a permanent bounce from one of your members,\n"
4871"             you should probably manually remove them from your list, and "
4872"2)\n"
4873"             you might want to send the message on to the Mailman "
4874"developers\n"
4875"             so that this new format can be added to its known set.\n"
4876"\n"
4877"             <p>If you really can't be bothered, then set this variable to\n"
4878"             <em>No</em> and all non-detected bounces will be discarded\n"
4879"             without further processing.\n"
4880"\n"
4881"             <p><b>Note:</b> This setting will also affect all messages "
4882"sent\n"
4883"             to your list's -admin address.  This address is deprecated and\n"
4884"             should never be used, but some people may still send mail to "
4885"this\n"
4886"             address.  If this happens, and this variable is set to\n"
4887"             <em>No</em> those messages too will get discarded.  You may "
4888"want\n"
4889"             to set up an\n"
4890"             <a href=\"?VARHELP=autoreply/autoresponse_admin_text"
4891"\">autoresponse\n"
4892"             message</a> for email to the -owner and -admin address."
4893msgstr ""
4894"�� ��� �� ������� ���������� ��� �������������� ��������� ��� Mailman\n"
4895"             ����� ������ ����, ����� ������� �� ��������� ���� ��� ������� "
4896"������\n"
4897"             ��� �������������� ��������� ��� �������� ���� �����. �� "
4898"������\n"
4899"             �� ������ �� ���� ��� ��������� ��� ���� <em>���</em> ��� ��� "
4900"������: \n"
4901"             1)�� ��������� �������� ��� ������ ������������� ������ ��� "
4902"������ ��� �� ���� ���,\n"
4903"             �� ������ �� ��� ���������� ����� ��������� ��� �� ����� ���, "
4904"��� \n"
4905"             2)������ �� �������� �� �������� �� ������ ����� "
4906"��������������� ���\n"
4907"             ���������� ��� Mailman ���� �� ��������� ����� � ���� ����� "
4908"���������\n"
4909"             ����� �������� ������.\n"
4910"\n"
4911"             <p>�� ���������� �� ������ �� �����������, ���� ����� ��� "
4912"��������� ����\n"
4913"             <em>���</em> ��� ��� �� ��-������������ ������������� �������� "
4914"�� �������������\n"
4915"             ����� ����� ��������� �����������.\n"
4916"\n"
4917"             <p><b>��������:</b> ���� � ������� �� ��������� ������ ��� �� "
4918"��������\n"
4919"             ��� ���������� ���� ��������� ��� �� ���������� ��� ������ "
4920"���.  ���� �\n"
4921"             ��������� ����� ���������� ��� �� ������ �� ���������������, "
4922"������ �������\n"
4923"             ������ �� �������� mail �� ���� �� ���������.  �� ������ ���� "
4924"������, ��� \n"
4925"             ���� � ��������� ���� ������� ��� <em>���</em> ���� �� �������� "
4926"��\n"
4927"             �����������.  ������ �� ������ �� ������� ��� \n"
4928"             <a href=\"?VARHELP=autoreply/autoresponse_admin_text\">������ "
4929"���������\n"
4930"             ���������</a> ��� �� email ���� ��� ����������� ��� ���������� "
4931"��� ��� ������������."
4932
4933#: Mailman/Gui/Bounce.py:147
4934#, fuzzy
4935msgid ""
4936"Should Mailman notify you, the list owner, when bounces\n"
4937"             cause a member's bounce score to be incremented?"
4938msgstr ""
4939"������ �� ��������� � Mailman ����, ��� ��������� ��� ������, \n"
4940"             ���� ������ ����� ���������������� ������ �� �������� ��� "
4941"������ ��� ������������ �� �����;"
4942
4943#: Mailman/Gui/Bounce.py:149
4944msgid ""
4945"Setting this value to <em>Yes</em> will cause Mailman to\n"
4946"             send a notice including a copy of the bounce message to the "
4947"list\n"
4948"             owners whenever a bounce increments a member's bounce score "
4949"but\n"
4950"             doesn't cause a disable or a probe to be sent."
4951msgstr ""
4952
4953#: Mailman/Gui/Bounce.py:156
4954msgid ""
4955"Should Mailman notify you, the list owner, when bounces\n"
4956"             cause a member's subscription to be disabled?"
4957msgstr ""
4958"������ �� ��������� � Mailman ����, ��� ��������� ��� ������, \n"
4959"             ���� ������ ����� ���������������� ������ �� �������� ��� "
4960"������ ��� ������������ �� �����;"
4961
4962#: Mailman/Gui/Bounce.py:158
4963msgid ""
4964"By setting this value to <em>No</em>, you turn off\n"
4965"             notification messages that are normally sent to the list "
4966"owners\n"
4967"             when a member's delivery is disabled due to excessive bounces.\n"
4968"             An attempt to notify the member will always be made."
4969msgstr ""
4970"��������� �� ��������� ��� <em>���</em>, ���������������\n"
4971"             �� �������� ����������� �� ����� ���������� ������� �����\n"
4972"             ���������� ��� ������ ��� ������� ��� �������������� �����\n"
4973"             ��� ����� ������ ������ �������������� ���������. �������� �� "
4974"����������� \n"
4975"\t\t\t  �� ����� �� ������� �����."
4976
4977#: Mailman/Gui/Bounce.py:165
4978msgid ""
4979"Should Mailman notify you, the list owner, when bounces\n"
4980"             cause a member to be unsubscribed?"
4981msgstr ""
4982"������ � Mailman �� ��������� ����, ��� ��������� ��� ������, \n"
4983"             ���� �� ������������� �������� ��������� ��� �������������� "
4984"������� ������;"
4985
4986#: Mailman/Gui/Bounce.py:167
4987msgid ""
4988"By setting this value to <em>No</em>, you turn off\n"
4989"             notification messages that are normally sent to the list "
4990"owners\n"
4991"             when a member is unsubscribed due to excessive bounces.  An\n"
4992"             attempt to notify the member will always be made."
4993msgstr ""
4994"��������� ���� �� ��������� ��� <em>���</em>, ���������������\n"
4995"             �� �������� ����������� �� ����� ���������� ��� ��������� "
4996"��������\n"
4997"             ����� ���������� ��� ������ ���� ��� ����� ����������� \n"
4998"             ���� ������� ������� �������������� ���������. �������� �� "
4999"����������� �\n"
5000"             ������� �� ������� �����."
5001
5002#: Mailman/Gui/Bounce.py:194
5003msgid ""
5004"Bad value for <a href=\"?VARHELP=bounce/%(property)s\"\n"
5005"                >%(property)s</a>: %(val)s"
5006msgstr ""
5007"���������� ���� ��� <a href=\"?VARHELP=bounce/%(property)s\"\n"
5008"                >%(property)s</a>: %(val)s"
5009
5010#: Mailman/Gui/ContentFilter.py:30
5011msgid "Content&nbsp;filtering"
5012msgstr "�������&nbsp;������������"
5013
5014#: Mailman/Gui/ContentFilter.py:37
5015msgid "Forward to List Owner"
5016msgstr "�������� ���� ��������� ��� ������"
5017
5018#: Mailman/Gui/ContentFilter.py:39
5019msgid "Preserve"
5020msgstr "���������"
5021
5022#: Mailman/Gui/ContentFilter.py:42
5023msgid ""
5024"Policies concerning the content of list traffic.\n"
5025"\n"
5026"            <p>Content filtering works like this: when a message is\n"
5027"            received by the list and you have enabled content filtering, "
5028"the\n"
5029"            individual attachments are first compared to the\n"
5030"            <a href=\"?VARHELP=contentfilter/filter_mime_types\">filter\n"
5031"            types</a>.  If the attachment type matches an entry in the "
5032"filter\n"
5033"            types, it is discarded.\n"
5034"\n"
5035"            <p>Then, if there are <a\n"
5036"            href=\"?VARHELP=contentfilter/pass_mime_types\">pass types</a>\n"
5037"            defined, any attachment type that does <em>not</em> match a\n"
5038"            pass type is also discarded.  If there are no pass types "
5039"defined,\n"
5040"            this check is skipped.\n"
5041"\n"
5042"            <p>After this initial filtering, any <tt>multipart</tt>\n"
5043"            attachments that are empty are removed.  If the outer message "
5044"is\n"
5045"            left empty after this filtering, then the whole message is\n"
5046"            discarded.\n"
5047"\n"
5048"            <p> Then, each <tt>multipart/alternative</tt> section will\n"
5049"            be replaced by just the first alternative that is non-empty "
5050"after\n"
5051"            filtering if\n"
5052"            <a href=\"?VARHELP=contentfilter/collapse_alternatives\"\n"
5053"            >collapse_alternatives</a> is enabled.\n"
5054"\n"
5055"            <p>Finally, any <tt>text/html</tt> parts that are left in the\n"
5056"            message may be converted to <tt>text/plain</tt> if\n"
5057"            <a href=\"?VARHELP=contentfilter/convert_html_to_plaintext\"\n"
5058"            >convert_html_to_plaintext</a> is enabled and the site is\n"
5059"            configured to allow these conversions."
5060msgstr ""
5061"��������� ��� �� ����������� ��� ��������� ��� ������.\n"
5062"\n"
5063"            <p>� ������� ��� ������������ �������� �� ����: ���� ��� ������\n"
5064"            ���������� ��� �� ����� ��� ���� ������������� � ������� ��� \n"
5065"            ������������, �� ��������� �������������� ������ ������������ "
5066"�����\n"
5067"            �� ���� <a href=\"?VARHELP=contentfilter/filter_mime_types"
5068"\">������\n"
5069"            �������</a>.  �� � ����� ��� ��������������� ������� ���������� "
5070"���\n"
5071"            �����, �� ������ ������������.\n"
5072"\n"
5073"            <p>��� ��������, �� ����� ������� ����� �������<a\n"
5074"            href=\"?VARHELP=contentfilter/pass_mime_types\"> ��� �������,</"
5075"a>\n"
5076"            ���� ���� �������������� �� ����� <em>���</em> ��������� �� "
5077"�������\n"
5078"            ��� ������ ���� ������ ������������. �� ��� ����� �������\n"
5079"            ����� ������� ��� �������, � ������� ������������.\n"
5080"\n"
5081"            <p>���� ��� ���� �� ������ �����������, ���� <tt>��������</tt>\n"
5082"            �������������� �� ����� ����� ���� ������������. �� �� "
5083"���������\n"
5084"            ������ ���� ������ ���� ���� ��� ���� �� �����������, ���� ��\n"
5085"            ������ ��� ������ ��� ������������. ��� ��������, ���� "
5086"<tt>���������/�����������</tt>\n"
5087"            ������� �� �������������� ��� ���� ��� ����� ����������� ��� "
5088"�����\n"
5089"            �� ���� ���� �� �����������.\n"
5090"\n"
5091"            <p>�����, ��� �� <tt>����� html</tt> ������� �� ����� ������ "
5092"���\n"
5093"            ������ ������� �� ����������� �� <tt>���� �������</tt> �� ��\n"
5094"            <a href=\"?VARHELP=contentfilter/convert_html_to_plaintext\"\n"
5095"            >��������� ��� html �� ���� �������</a> ����� �������������� ��� "
5096"�� site\n"
5097"            ����� ������������ �� ��������� ������� ����������."
5098
5099#: Mailman/Gui/ContentFilter.py:75
5100msgid ""
5101"Should Mailman filter the content of list traffic according\n"
5102"             to the settings below?"
5103msgstr ""
5104"������ �� ��������� � Mailman �� ����������� ��� �����������\n"
5105"             ��� �� ����� ������� �� ��� �������� ���������;"
5106
5107#: Mailman/Gui/ContentFilter.py:79
5108msgid ""
5109"Remove message attachments that have a matching content\n"
5110"             type."
5111msgstr ""
5112"�������� ��� ��������������� ��� ��������� ���� �� �������������� \n"
5113"             ����� ����� ��� ���������� ��� �����."
5114
5115#: Mailman/Gui/ContentFilter.py:82
5116msgid ""
5117"Use this option to remove each message attachment that\n"
5118"             matches one of these content types.  Each line should contain "
5119"a\n"
5120"             string naming a MIME <tt>type/subtype</tt>,\n"
5121"             e.g. <tt>image/gif</tt>.  Leave off the subtype to remove all\n"
5122"             parts with a matching major content type, e.g. <tt>image</tt>.\n"
5123"\n"
5124"             <p>Blank lines are ignored.\n"
5125"\n"
5126"             <p>See also <a href=\"?VARHELP=contentfilter/pass_mime_types\"\n"
5127"             >pass_mime_types</a> for a content type whitelist."
5128msgstr ""
5129"���� � ������� ������ �� �������������� ��� �� �������� ����\n"
5130"             ��������������� ��� ��������� �� ������� ��� ������ ���� "
5131"������\n"
5132"             ������������. ���� ������ ������ �� �������� ��� ���������\n"
5133"             ���������� � ����� ���������� ��� MIME <tt>���������/"
5134"������������</tt>,\n"
5135"             �.�. <tt>������/gif</tt>. ������ �������� ��� ������������ ��� "
5136"�� \n"
5137"             ���������� ��� �� ������� ��� ���������� �� ������ ����� ����\n"
5138"             ������������, �.�. <tt>������</tt>.\n"
5139"             <p>�� ����� ������� ��� ����������� ������.\n"
5140"\n"
5141"             <p>����� ������ <a href=\"?VARHELP=contentfilter/pass_mime_types"
5142"\">pass_mime_types</a> ��� ��� ����� �� ���� �������������� ������\n"
5143"             ������������ (����� �����)."
5144
5145#: Mailman/Gui/ContentFilter.py:94
5146msgid ""
5147"Remove message attachments that don't have a matching\n"
5148"             content type.  Leave this field blank to skip this filter\n"
5149"             test."
5150msgstr ""
5151"�������� ��� ��������������� ��� ��� ����� ���� ������������\n"
5152"             � ������ ��������� �� �� �����.  ������ ���� �� ����� ���� \n"
5153"             ��� �� ����������� ��� ������ ����� ��� �������."
5154
5155#: Mailman/Gui/ContentFilter.py:98
5156msgid ""
5157"Use this option to remove each message attachment that does\n"
5158"             not have a matching content type.  Requirements and formats "
5159"are\n"
5160"             exactly like <a href=\"?VARHELP=contentfilter/filter_mime_types"
5161"\"\n"
5162"             >filter_mime_types</a>.\n"
5163"\n"
5164"             <p><b>Note:</b> if you add entries to this list but don't add\n"
5165"             <tt>multipart</tt> to this list, any messages with attachments\n"
5166"             will be rejected by the pass filter."
5167msgstr ""
5168"���� � ������� ������ �� ��������������� ��� �� �������� ����\n"
5169"             ��������������� ��� ��� ��������� �� ������� ��� ������ ����\n"
5170"             ������ ������������.  �� ���������� ��� �� ������ �����\n"
5171"             ������� ���� <a href=\"?VARHELP=contentfilter/filter_mime_types"
5172"\">filter_mime_types</a>.\n"
5173"\n"
5174"             <p><b>��������:</b> �� ������ ���� ������������ ���� ��� "
5175"����������\n"
5176"             �� <tt>�������� ����</tt> �� ���� �� �����, ��� �� �������� �� "
5177"��������������\n"
5178"             �� ����������� ����� ������� ��� �� ������."
5179
5180#: Mailman/Gui/ContentFilter.py:108
5181msgid ""
5182"Remove message attachments that have a matching filename\n"
5183"             extension."
5184msgstr ""
5185"�������� ��� ��������������� ��� ��������� ���� �� �������������� \n"
5186"             ����� ����� ��� ���������� ��� �����."
5187
5188#: Mailman/Gui/ContentFilter.py:112
5189msgid ""
5190"Remove message attachments that don't have a matching\n"
5191"             filename extension.  Leave this field blank to skip this "
5192"filter\n"
5193"             test."
5194msgstr ""
5195"�������� ��� ��������������� ��� ��� ����� ���� ������������\n"
5196"             � ������ ��������� �� �� �����.  ������ ���� �� ����� ���� \n"
5197"             ��� �� ����������� ��� ������ ����� ��� �������."
5198
5199#: Mailman/Gui/ContentFilter.py:117
5200msgid ""
5201"Should Mailman collapse multipart/alternative to its\n"
5202"             first part content?"
5203msgstr ""
5204"������ �� ������� � Mailman �������� �������� ����� \n"
5205"             ���������� ��� ������;"
5206
5207#: Mailman/Gui/ContentFilter.py:121
5208msgid ""
5209"Should Mailman convert <tt>text/html</tt> parts to plain\n"
5210"             text?  This conversion happens after MIME attachments have "
5211"been\n"
5212"             stripped."
5213msgstr ""
5214"������ � Mailman �� ���������� �� ������� <tt>�������/html</tt>\n"
5215"             �� ���� �������; ���� � ��������� ��������� ������� ��� "
5216"�������� ��� ��������������� MIME.\n"
5217" "
5218
5219#: Mailman/Gui/ContentFilter.py:127
5220msgid ""
5221"Action to take when a message matches the content filtering\n"
5222"             rules."
5223msgstr ""
5224"��������� ��� ������ �� ������ ��� �� �������� ��� ����������� ���� �������\n"
5225"             ��������������."
5226
5227#: Mailman/Gui/ContentFilter.py:130
5228msgid ""
5229"One of these actions is taken when the message matches one of\n"
5230"             the content filtering rules, meaning, the top-level\n"
5231"             content type matches one of the <a\n"
5232"             href=\"?VARHELP=contentfilter/filter_mime_types\"\n"
5233"             >filter_mime_types</a>, or the top-level content type does\n"
5234"             <strong>not</strong> match one of the\n"
5235"             <a href=\"?VARHELP=contentfilter/pass_mime_types\"\n"
5236"             >pass_mime_types</a>, or if after filtering the subparts of "
5237"the\n"
5238"             message, the message ends up empty.\n"
5239"\n"
5240"             <p>Note this action is not taken if after filtering the "
5241"message\n"
5242"             still contains content.  In that case the message is always\n"
5243"             forwarded on to the list membership.\n"
5244"\n"
5245"             <p>When messages are discarded, a log entry is written\n"
5246"             containing the Message-ID of the discarded message.  When\n"
5247"             messages are rejected or forwarded to the list owner, a reason\n"
5248"             for the rejection is included in the bounce message to the\n"
5249"             original author.  When messages are preserved, they are saved "
5250"in\n"
5251"             a special queue directory on disk for the site administrator "
5252"to\n"
5253"             view (and possibly rescue) but otherwise discarded.  This last\n"
5254"             option is only available if enabled by the site\n"
5255"             administrator."
5256msgstr ""
5257"��� ��� ����� ��� ��������� ���������������� ���� �� ������ ����������\n"
5258"             ���� ��� ���� ������� ��������������.  ���� �������� ��� � "
5259"�����\n"
5260"             ������������ ��� ��������� ��� ��������� ������� ����� ����� "
5261"<ahref=\"?VARHELP=contentfilter/filter_mime_types\">filter_mime</a>, � ��� � "
5262"����� ������������ ��� ���������\n"
5263"             ��� ��������� ������� <strong>���</strong> ��������� �� ������ "
5264"��� �� �����\n"
5265"             <a href=\"?VARHELP=contentfilter/pass_mime_types\">pass_mime</"
5266"a>, � �� ���� �� ����������� ��� ���-�������� ���\n"
5267"             ���������, �� ������ ��������� ����.\n"
5268"\n"
5269"             <p>������ �� ��������� ��� � �������� ��� ���������������� �� "
5270"���� ��\n"
5271"             ����������� ��� ��������� ����������� �� ������� �����������. "
5272"�� ����\n"
5273"             ��� ��������� �� ������ ���������� ����� ��� �����.\n"
5274"\n"
5275"             <p>���� ������������� �������� ����� ���������, ������� ��� "
5276"���������� ��� ������\n"
5277"             ���������� � ����� �������� �� ������ ��� ��������� ���\n"
5278"             �����������.  ���� ������������� �������� � ����������� ���� "
5279"���������\n"
5280"             ��� ������, ��� ������������� ������ ���� ��� ������ ��������� "
5281"��� ���������\n"
5282"             �������������� ��� ���� ����� ��� ��� ��������.  ���� �� "
5283"��������\n"
5284"             ����������, �������� �� ��� ������ �������� ��� ����� ��� �� �� "
5285"��� �\n"
5286"             ������������ ��� ������� (��� ���������� �� �� ��������) ������ "
5287"�������������.\n"
5288"             ���� � ��������� ������� ����� ��������� ���� �� ���� "
5289"������������� ��� ��\n"
5290"             ����������� ��� �������."
5291
5292#: Mailman/Gui/ContentFilter.py:171
5293msgid "Bad MIME type ignored: %(spectype)s"
5294msgstr "��������� � ����������� MIME �����: %(spectype)s"
5295
5296#: Mailman/Gui/Digest.py:36
5297msgid "Digest options"
5298msgstr "�������� ��������� ��������"
5299
5300#: Mailman/Gui/Digest.py:44
5301msgid "Batched-delivery digest characteristics."
5302msgstr "�������������� ��� �������� ��������� �������� ���������."
5303
5304#: Mailman/Gui/Digest.py:47
5305msgid "Can list members choose to receive list traffic bunched in digests?"
5306msgstr ""
5307"������� �� ���� ��� ������ �� ��������� �� ��������� �� �������� ���\n"
5308"       ������ ������������� �� ��������;"
5309
5310#: Mailman/Gui/Digest.py:51
5311msgid "Digest"
5312msgstr "������"
5313
5314#: Mailman/Gui/Digest.py:51
5315msgid "Regular"
5316msgstr "��������"
5317
5318#: Mailman/Gui/Digest.py:52
5319msgid "Which delivery mode is the default for new users?"
5320msgstr "���� ������� ��������� ����� � ������������� ��� ���� ����� �������;"
5321
5322#: Mailman/Gui/Digest.py:55
5323msgid "MIME"
5324msgstr "MIME"
5325
5326#: Mailman/Gui/Digest.py:55
5327msgid "Plain"
5328msgstr "������ �������"
5329
5330#: Mailman/Gui/Digest.py:56
5331msgid "When receiving digests, which format is default?"
5332msgstr ""
5333"���� ���������� �������� ��� ���������, ���� ����� ����� �������������;"
5334
5335#: Mailman/Gui/Digest.py:59
5336#, fuzzy
5337msgid ""
5338"How big in Kb should a digest be before it gets sent out?  0 implies no "
5339"maximum size."
5340msgstr "���� ������ �� Kb ������ �� ����� ��� ������ ���� ���������;"
5341
5342#: Mailman/Gui/Digest.py:63
5343msgid ""
5344"Should a digest be dispatched daily when the size threshold isn't reached?"
5345msgstr ""
5346"������ ��� ������ �� ������������ ���������� ����� ��� ���� �� ������� ��� \n"
5347"       ��� ���� ������ ��� ���� ��� ���� �������;"
5348
5349#: Mailman/Gui/Digest.py:67
5350msgid "Header added to every digest"
5351msgstr "����������� ��� �� ��������� �� ���� ������"
5352
5353#: Mailman/Gui/Digest.py:68
5354msgid ""
5355"Text attached (as an initial message, before the table of contents) to the "
5356"top of digests. "
5357msgstr ""
5358"������� ��� �� ��������� (�� ������ ������, ���� ��� ������ ������������) "
5359"��� ���� ����� ��� ��������."
5360
5361#: Mailman/Gui/Digest.py:73
5362msgid "Footer added to every digest"
5363msgstr "��������� ��� �� ��������� �� ���� ������"
5364
5365#: Mailman/Gui/Digest.py:74
5366msgid "Text attached (as a final message) to the bottom of digests. "
5367msgstr "������������ �������(�� ������ ������) ��� ����� ��� ��������."
5368
5369#: Mailman/Gui/Digest.py:80
5370msgid "How often should a new digest volume be started?"
5371msgstr "���� ����� ������ �� ������ ��� ���� ����� �������;"
5372
5373#: Mailman/Gui/Digest.py:81
5374msgid ""
5375"When a new digest volume is started, the volume number is\n"
5376"             incremented and the issue number is reset to 1."
5377msgstr ""
5378"���� ������ ���� ���� ����� �������, � ������� ��� ����� \n"
5379"             ��������� ��� � ������� ��� ������� �������������� ��� 1."
5380
5381#: Mailman/Gui/Digest.py:85
5382msgid "Should Mailman start a new digest volume?"
5383msgstr "������ � Mailman �� ��������� ��� ���� �������;"
5384
5385#: Mailman/Gui/Digest.py:86
5386msgid ""
5387"Setting this option instructs Mailman to start a new volume\n"
5388"             with the next digest sent out."
5389msgstr ""
5390"� ������� ����� ��� �������� ����� ��� Mailman ��� ������ �� \n"
5391"             ��������� ��� ��� ���� �� ��� ������� ������ ��� ����������."
5392
5393#: Mailman/Gui/Digest.py:90
5394msgid ""
5395"Should Mailman send the next digest right now, if it is not\n"
5396"             empty?"
5397msgstr ""
5398"������ � Mailman �� ������� ��� ������� ������ ������, ��\n"
5399"             ���� ��� ����� ����;"
5400
5401#: Mailman/Gui/Digest.py:145
5402msgid ""
5403"The next digest will be sent as volume\n"
5404"            %(volume)s, number %(number)s"
5405msgstr ""
5406"� ������� ������ �� ������ �� ����� \n"
5407"            %(volume)s, ������� %(number)s"
5408
5409#: Mailman/Gui/Digest.py:150
5410msgid "A digest has been sent."
5411msgstr "��� ������ ���������."
5412
5413#: Mailman/Gui/Digest.py:152
5414msgid "There was no digest to send."
5415msgstr "��� ������� ������ �� ���������."
5416
5417#: Mailman/Gui/GUIBase.py:173
5418msgid "Invalid value for variable: %(property)s"
5419msgstr "�� ������ ���� ��� �� ���������: %(property)s"
5420
5421#: Mailman/Gui/GUIBase.py:178
5422msgid "Bad email address for option %(property)s: %(error)s"
5423msgstr ""
5424"���������� ��������� ������������ ������������ ��� ��� ������� %(property)s: "
5425"%(error)s"
5426
5427#: Mailman/Gui/GUIBase.py:204
5428msgid ""
5429"The following illegal substitution variables were\n"
5430"                found in the <code>%(property)s</code> string:\n"
5431"                <code>%(bad)s</code>\n"
5432"                <p>Your list may not operate properly until you correct "
5433"this\n"
5434"                problem."
5435msgstr ""
5436"�� ��������� �� ������� ���������� �������������� ��������\n"
5437"                ���� ������������ <code>%(property)s</code> :\n"
5438"                <code>%(bad)s</code>\n"
5439"                <p>� ����� ��� ������ �� ��� ���������� �������� ����� �� "
5440"����������\n"
5441"                ���� �� ��������."
5442
5443#: Mailman/Gui/GUIBase.py:218
5444msgid ""
5445"Your <code>%(property)s</code> string appeared to\n"
5446"                    have some correctable problems in its new value.\n"
5447"                    The fixed value will be used instead.  Please\n"
5448"                    double check that this is what you intended.\n"
5449"                    "
5450msgstr ""
5451"� ������������ ��� <code>%(property)s</code> \n"
5452"                    �������� �� ���� ������ ���������� �� ����� ������� ��\n"
5453"                    ���������� ��� ��� ��� ����. � ���������� ���� �� \n"
5454"                    �������������� ���'�����.  ����������� ������� ����\n"
5455"                    ��� ���� ����� � ������������ ��� ������.\n"
5456"                    "
5457
5458#: Mailman/Gui/General.py:37
5459msgid "General Options"
5460msgstr "������� ��������"
5461
5462#: Mailman/Gui/General.py:51
5463msgid "Conceal the member's address"
5464msgstr "�������� ��� ���������� ��� ������"
5465
5466#: Mailman/Gui/General.py:52
5467msgid "Acknowledge the member's posting"
5468msgstr "�������� ����� ��� ��������� ��������� ��� ������"
5469
5470#: Mailman/Gui/General.py:53
5471msgid "Do not send a copy of a member's own post"
5472msgstr "�� ��� ������ ��������� ��� ��������� ��� ����� ��� ����� ��� ��������"
5473
5474#: Mailman/Gui/General.py:55
5475msgid "Filter out duplicate messages to list members (if possible)"
5476msgstr ""
5477"�� ������������ �� ����� �������� ��� ���� ��� ������ (�� ����� �������)"
5478
5479#: Mailman/Gui/General.py:62
5480msgid ""
5481"Fundamental list characteristics, including descriptive\n"
5482"            info and basic behaviors."
5483msgstr ""
5484"��������� �������������� ��� ������, ������������������� ���\n"
5485"            ������������ ����������� ��� ��� ������� ������������."
5486
5487#: Mailman/Gui/General.py:65
5488msgid "General list personality"
5489msgstr "������ �������������� ��� ������"
5490
5491#: Mailman/Gui/General.py:68
5492msgid "The public name of this list (make case-changes only)."
5493msgstr ""
5494"�� ������� ����� ����� ��� ������ (�� ������� �� �����\n"
5495"       ���� ��� �������� �� ����� ��� �� ����������)."
5496
5497#: Mailman/Gui/General.py:69
5498msgid ""
5499"The capitalization of this name can be changed to make it\n"
5500"             presentable in polite company as a proper noun, or to make an\n"
5501"             acronym part all upper case, etc.  However, the name will be\n"
5502"             advertised as the email address (e.g., in subscribe "
5503"confirmation\n"
5504"             notices), so it should <em>not</em> be otherwise altered.  "
5505"(Email\n"
5506"             addresses are not case sensitive, but they are sensitive to\n"
5507"             almost everything else :-)"
5508msgstr ""
5509"� ����� ��������� ���������� �� ���� �� ����� ������ �� ������� ���� ��\n"
5510"             ������������� ������� �� ���� ������� ��������� ������������ �� "
5511"��������\n"
5512"             ����������, � ��� �� ������ ��� ��������� �� ��������, ���. "
5513"������, �� �����\n"
5514"             �� ������������ �� � email ��������� (�.�., ���� ���������� ��� "
5515"��� �����������\n"
5516"             ��������), ���� �� <em>���</em> ������ �� �������� �� "
5517"����������� ���������. (��\n"
5518"             ����������� ������������ ������������ ��� ����� ���������� �� "
5519"������� ���\n"
5520"             ���������� ����������, ���� ����� ���������� �� ��������� "
5521"����:-)"
5522
5523#: Mailman/Gui/General.py:78
5524msgid ""
5525"The list administrator email addresses.  Multiple\n"
5526"             administrator addresses, each on separate line is okay."
5527msgstr ""
5528"�� email ����������� ��� ����������� ��� ������.  ��������\n"
5529"             ��� ��� �������������� �����������, ���� ��� �� ��������� "
5530"������."
5531
5532#: Mailman/Gui/General.py:81
5533msgid ""
5534"There are two ownership roles associated with each mailing\n"
5535"             list.  The <em>list administrators</em> are the people who "
5536"have\n"
5537"             ultimate control over all parameters of this mailing list.  "
5538"They\n"
5539"             are able to change any list configuration variable available\n"
5540"             through these administration web pages.\n"
5541"\n"
5542"             <p>The <em>list moderators</em> have more limited permissions;\n"
5543"             they are not able to change any list configuration variable, "
5544"but\n"
5545"             they are allowed to tend to pending administration requests,\n"
5546"             including approving or rejecting held subscription requests, "
5547"and\n"
5548"             disposing of held postings.  Of course, the <em>list\n"
5549"             administrators</em> can also tend to pending requests.\n"
5550"\n"
5551"             <p>In order to split the list ownership duties into\n"
5552"             administrators and moderators, you must\n"
5553"             <a href=\"passwords\">set a separate moderator password</a>,\n"
5554"             and also provide the <a href=\"?VARHELP=general/moderator"
5555"\">email\n"
5556"             addresses of the list moderators</a>.  Note that the field you\n"
5557"             are changing here specifies the list administrators."
5558msgstr ""
5559"�������� ��� ������ ����� ����������� �� ������ ����������� �� ���� \n"
5560"             �����. �� <em>������������ ��� ������</em> ����� ����� ��� "
5561"�����\n"
5562"             ��� ������� ������ ���� �� ���� ��� ����������� ����� ��� "
5563"������. �����\n"
5564"             ������� �� �������� ���� ��� ���������� ���������� ��� ������\n"
5565"             ��� ������� �� ������������ ���� ��� �������������� web "
5566"�������.\n"
5567"\n"
5568"             <p>�� <em>����������� ��� ������</em> ����� ��� ������������ "
5569"����������:\n"
5570"             ��� ������� �� �������� ���� ��� ���������� ���������� ��� "
5571"������, ����\n"
5572"             ������� �� ���������� ��� �� ������� ������������� ��������,\n"
5573"             ������������������� ��� �������� � ��������� ��������� �������� "
5574"��� ����� �� �������, ���\n"
5575"             �� ������������ �� ������� ��� �������� �� ����� ����� �������� "
5576"���� �������. ������, �� <em>������������\n"
5577"             ��� ������</em> ������� ������ �� ���������� �� ������� "
5578"��������.\n"
5579"\n"
5580"             <p>����������� �� ������������ �� ��������� ��� ������ �� "
5581"���� \n"
5582"             ��� ������������ ��� ��� �����������, ������ ��\n"
5583"             <a href=\"passwords\">�� ������� ���� ���������� ������� "
5584"��������� ��� ��� ����������</a>,\n"
5585"             ��� �� ������ ������ �� <a href=\"?VARHELP=general/moderator"
5586"\">email\n"
5587"             ����������� ��� ����������� ��� ������</a>.  ������ �� "
5588"��������� ��� �� ����� ���\n"
5589"             �������� ��� ��������� ��� ����� ��� ������������."
5590
5591#: Mailman/Gui/General.py:102
5592msgid ""
5593"The list moderator email addresses.  Multiple\n"
5594"             moderator addresses, each on separate line is okay."
5595msgstr ""
5596"�� email ����������� ��� ���������� ��� ������. ��������\n"
5597"             ��� ��� ����������� �����������, ���� ��� �� ��������� ������."
5598
5599#: Mailman/Gui/General.py:105
5600msgid ""
5601"There are two ownership roles associated with each mailing\n"
5602"             list.  The <em>list administrators</em> are the people who "
5603"have\n"
5604"             ultimate control over all parameters of this mailing list.  "
5605"They\n"
5606"             are able to change any list configuration variable available\n"
5607"             through these administration web pages.\n"
5608"\n"
5609"             <p>The <em>list moderators</em> have more limited permissions;\n"
5610"             they are not able to change any list configuration variable, "
5611"but\n"
5612"             they are allowed to tend to pending administration requests,\n"
5613"             including approving or rejecting held subscription requests, "
5614"and\n"
5615"             disposing of held postings.  Of course, the <em>list\n"
5616"             administrators</em> can also tend to pending requests.\n"
5617"\n"
5618"             <p>In order to split the list ownership duties into\n"
5619"             administrators and moderators, you must\n"
5620"             <a href=\"passwords\">set a separate moderator password</a>,\n"
5621"             and also provide the email addresses of the list moderators in\n"
5622"             this section.  Note that the field you are changing here\n"
5623"             specifies the list moderators."
5624msgstr ""
5625"�������� ��� ������ ����� ����������� �� ������ ����������� �� ���� �����.\n"
5626"             �� <em>������������ ��� ������</em> ����� ����� ��� ����� ���\n"
5627"             ������� ������ ���� �� ���� ��� ����������� ����� ��� ������. "
5628"�����\n"
5629"             ������� �� �������� ���� ��� ���������� ���������� ��� ������ "
5630"��� \n"
5631"             ������� �� ������������ ���� ����� ��� �������������� web "
5632"�������.\n"
5633"\n"
5634"             <p>�� <em>����������� ��� ������</em> ����� ��� ������������ "
5635"����������.\n"
5636"             ��� ������� �� �������� ���� ��� ���������� ���������� ��� "
5637"������, �������\n"
5638"             ���� �� ���������� �� ������� ������������� ��������, "
5639"�������������������\n"
5640"             ��� �������� ��� ��� ��������� ��������� �������� ��� ����� �� "
5641"�������, ���\n"
5642"             �� ������������ �� ������� ��� �������� �� ����� ����� �������� "
5643"���� �������.\n"
5644"             ������, �� <em>������������ ��� ������</em> ������� ������ �� "
5645"���������� ��\n"
5646"             ������� ��������.\n"
5647"\n"
5648"             <p>����������� �� ������������ �� ��������� ��� ������ �� ���� "
5649"��� ������������ ��� ��� �����������, ������ ��\n"
5650"             <a href=\"passwords\">������� ���� ���������� ������� "
5651"����������</a>,\n"
5652"             ��� �� ������ ������ �� email ����������� ��� ����������� ��� "
5653"������.  ������ �� \n"
5654"             ��������� ��� �� ����� ��� �������� ��� ��������� ���� "
5655"������������ ��� ������."
5656
5657#: Mailman/Gui/General.py:126
5658msgid "A terse phrase identifying this list."
5659msgstr "��� ���������� ����� � ����� ���������� ���� �� �����."
5660
5661#: Mailman/Gui/General.py:128
5662msgid ""
5663"This description is used when the mailing list is listed with\n"
5664"                other mailing lists, or in headers, and so forth.  It "
5665"should\n"
5666"                be as succinct as you can get it, while still identifying "
5667"what\n"
5668"                the list is."
5669msgstr ""
5670"���� � ��������� ��������������� ���� � ����� �����������������\n"
5671"                �� ��� ������ ������, � ������������, ��� ���� ���' ����.\n"
5672"                �� ������ �� ����� ��� ��� �������� �������, ��� ���������� "
5673"�� ������������\n"
5674"                �� �����."
5675
5676#: Mailman/Gui/General.py:134
5677msgid ""
5678"An introductory description - a few paragraphs - about the\n"
5679"             list.  It will be included, as html, at the top of the "
5680"listinfo\n"
5681"             page.  Carriage returns will end a paragraph - see the details\n"
5682"             for more info."
5683msgstr ""
5684"��� ���������� ��������� - ����� ���������� - ������� �� ��\n"
5685"             �����. �� ��������������, �� html, ��� ���� ����� ��� ������� "
5686"�� ���\n"
5687"             ����������� ��� �� �����. �������� �� ������� Enter ��\n"
5688"             ������������ ��� ���������� - ����� ��� ������������ ��� "
5689"������������\n"
5690"             �����������."
5691
5692#: Mailman/Gui/General.py:138
5693msgid ""
5694"The text will be treated as html <em>except</em> that\n"
5695"             newlines will be translated to &lt;br&gt; - so you can use "
5696"links,\n"
5697"             preformatted text, etc, but don't put in carriage returns "
5698"except\n"
5699"             where you mean to separate paragraphs.  And review your changes "
5700"-\n"
5701"             bad html (like some unterminated HTML constructs) can prevent\n"
5702"             display of the entire listinfo page."
5703msgstr ""
5704"�� ������� �� ��������������� �� html <em>�����</em> ��� ����� ��� ���� "
5705"�������\n"
5706"             �� ������ �� ������������� ��� &lt;br&gt; - ���� �� �������� �� "
5707"��������������,\n"
5708"             ����������, ������������� �������, ���, ���� ��� ������ �� "
5709"������� Enter ���� ����\n"
5710"             ��� ������ ��� ������ �� �������� �����������.  ����� "
5711"���������� ��� ������� ��� -\n"
5712"             � ���� html (���� HTML ������� ��� ��� ��������) ������ �� "
5713"���������� ��� ��������\n"
5714"             ��������� ��� ������� �� ��� ����������� ��� ������."
5715
5716#: Mailman/Gui/General.py:146
5717msgid "Prefix for subject line of list postings."
5718msgstr "������� ��� �� ���� ��� ��������� ��� ������."
5719
5720#: Mailman/Gui/General.py:147
5721msgid ""
5722"This text will be prepended to subject lines of messages\n"
5723"             posted to the list, to distinguish mailing list messages in\n"
5724"             mailbox summaries.  Brevity is premium here, it's ok to "
5725"shorten\n"
5726"             long mailing list names to something more concise, as long as "
5727"it\n"
5728"             still identifies the mailing list.\n"
5729"             You can also add a sequential number by %%d substitution\n"
5730"             directive. eg.; [listname %%d] -> [listname 123]\n"
5731"                            (listname %%05d) -> (listname 00123)\n"
5732"             "
5733msgstr ""
5734"���� �� ������� �� ������� ������� ��� ���� ��� ��������� ��� ���������� ��\n"
5735"             ���� �� �����, ���� �� ������������� �� �������� ��� ������ ��\n"
5736"             ������������� ���������������.  �� �������� ��� ����� � "
5737"��������. ����� ��������\n"
5738"             � ���������� ��� ������� �������� ������ �� ���� ��� �������, "
5739"������ ���� ������������ �� �����.\n"
5740" �������� ������ �� ���������� ���� ��������� ������ ��� ��� %%d ������\n"
5741"             ��������������. ��: [listname %%d] -> [listname 123]\n"
5742"                            (����� ������ %%05d) -> (����� ������ 00123)\n"
5743"             "
5744
5745#: Mailman/Gui/General.py:158 Mailman/Gui/Privacy.py:288
5746msgid "Munge From"
5747msgstr ""
5748
5749#: Mailman/Gui/General.py:158 Mailman/Gui/Privacy.py:288
5750#, fuzzy
5751msgid "Wrap Message"
5752msgstr "������ ������"
5753
5754#: Mailman/Gui/General.py:159
5755msgid ""
5756"Replace the From: header address with the list's posting\n"
5757"             address to mitigate issues stemming from the original From:\n"
5758"             domain's DMARC or similar policies."
5759msgstr ""
5760
5761#: Mailman/Gui/General.py:162
5762msgid ""
5763"Several protocols now in wide use attempt to ensure that use\n"
5764"             of the domain in the author's address (ie, in the From: header\n"
5765"             field) is authorized by that domain.  These protocols may be\n"
5766"             incompatible with common list features such as footers, "
5767"causing\n"
5768"             participating email services to bounce list traffic merely\n"
5769"             because of the address in the From: field.  <b>This has "
5770"resulted\n"
5771"             in members being unsubscribed despite being perfectly able to\n"
5772"             receive mail.</b>\n"
5773"             <p>\n"
5774"             The following actions are applied to all list messages when\n"
5775"             selected here.  To apply these actions only to messages where "
5776"the\n"
5777"             domain in the From: header is determined to use such a "
5778"protocol,\n"
5779"             see the <a\n"
5780"             href=\"?VARHELP=privacy/sender/dmarc_moderation_action\">\n"
5781"             dmarc_moderation_action</a> settings under Privacy options...\n"
5782"             -&gt; Sender filters.\n"
5783"             <p>Settings:<p>\n"
5784"             <dl>\n"
5785"             <dt>No</dt>\n"
5786"             <dd>Do nothing special.  This is appropriate for anonymous "
5787"lists.\n"
5788"             It is appropriate for dedicated announcement lists, unless the\n"
5789"             From: address of authorized posters might be in a domain with "
5790"a\n"
5791"             DMARC or similar policy. It is also appropriate if you choose "
5792"to\n"
5793"             use dmarc_moderation_action other than Accept for this list.</"
5794"dd>\n"
5795"             <dt>Munge From</dt>\n"
5796"             <dd>This action replaces the poster's address in the From: "
5797"header\n"
5798"             with the list's posting address and adds the poster's address "
5799"to\n"
5800"             the addresses in the original Reply-To: header.</dd>\n"
5801"             <dt>Wrap Message</dt>\n"
5802"             <dd>Just wrap the message in an outer message with the From:\n"
5803"             header containing the list's posting address and with the "
5804"original\n"
5805"             From: address added to the addresses in the original Reply-To:\n"
5806"             header and with Content-Type: message/rfc822.  This is "
5807"effectively\n"
5808"             a one message MIME format digest.</dd>\n"
5809"             </dl>\n"
5810"             <p>The transformations for anonymous_list are applied before\n"
5811"             any of these actions. It is not useful to apply actions other\n"
5812"             than No to an anonymous list, and if you do so, the result may\n"
5813"             be surprising.\n"
5814"             <p>The Reply-To: header munging actions below interact with "
5815"these\n"
5816"             actions as follows:\n"
5817"             <p> first_strip_reply_to = Yes will remove all the incoming\n"
5818"             Reply-To: addresses but will still add the poster's address to\n"
5819"             Reply-To: for all three settings of reply_goes_to_list which\n"
5820"             respectively will result in just the poster's address, the\n"
5821"             poster's address and the list posting address or the poster's\n"
5822"             address and the explicit reply_to_address in the outgoing\n"
5823"             Reply-To: header. If first_strip_reply_to = No the poster's\n"
5824"             address in the original From: header, if not already included "
5825"in\n"
5826"             the Reply-To:, will be added to any existing Reply-To:\n"
5827"             address(es).\n"
5828"             <p>These actions, whether selected here or via <a\n"
5829"             href=\"?VARHELP=privacy/sender/dmarc_moderation_action\">\n"
5830"             dmarc_moderation_action</a>, do not apply to messages in "
5831"digests\n"
5832"             or archives or sent to usenet via the Mail&lt;-&gt;News "
5833"gateways.\n"
5834"             <p>If <a\n"
5835"             href=\"?VARHELP=privacy/sender/dmarc_moderation_action\">\n"
5836"             dmarc_moderation_action</a> applies to this message with an\n"
5837"             action other than Accept, that action rather than this is\n"
5838"             applied"
5839msgstr ""
5840
5841#: Mailman/Gui/General.py:224
5842msgid ""
5843"Hide the sender of a message, replacing it with the list\n"
5844"             address (Removes From, Sender and Reply-To fields)"
5845msgstr ""
5846"�������� ��� ��������� ���� ���������, ��������������� ��� �� ��\n"
5847"             ��������� ��� ������ (��������� �� ����� ���, ���������� ��� "
5848"��������-��)."
5849
5850#: Mailman/Gui/General.py:227
5851msgid "<tt>Reply-To:</tt> header munging"
5852msgstr "���������� ������������ <tt>Reply-To:</tt>"
5853
5854#: Mailman/Gui/General.py:230
5855msgid ""
5856"Should any existing <tt>Reply-To:</tt> header found in the\n"
5857"             original message be stripped?  If so, this will be done\n"
5858"             regardless of whether an explict <tt>Reply-To:</tt> header is\n"
5859"             added by Mailman or not."
5860msgstr ""
5861"������ ������ ��������� <tt>Reply-To:</tt> ����������� � ����� ���������\n"
5862"             ��� ������ ������ �� �����������;  �� ���, ���� �� �������\n"
5863"             ���������� ��� �� ��� ��� ���� <tt>Reply-To:</tt> ����������� "
5864"����\n"
5865"             ��������� ��� �� Mailman � ���."
5866
5867#: Mailman/Gui/General.py:236
5868msgid "Explicit address"
5869msgstr "���� ���������"
5870
5871#: Mailman/Gui/General.py:236
5872msgid "Poster"
5873msgstr "����������"
5874
5875#: Mailman/Gui/General.py:236
5876msgid "This list"
5877msgstr "���� � �����"
5878
5879#: Mailman/Gui/General.py:237
5880msgid ""
5881"Where are replies to list messages directed?\n"
5882"             <tt>Poster</tt> is <em>strongly</em> recommended for most "
5883"mailing\n"
5884"             lists."
5885msgstr ""
5886"��� ������������� �� ���������� ��� �������� ��� ������;\n"
5887"             <tt>���� ���������</tt> ����������� <em>������</em> ��� ���\n"
5888"             ������������ ������ ������������ ������������."
5889
5890#: Mailman/Gui/General.py:242
5891msgid ""
5892"This option controls what Mailman does to the\n"
5893"             <tt>Reply-To:</tt> header in messages flowing through this\n"
5894"             mailing list.  When set to <em>Poster</em>, no <tt>Reply-To:</"
5895"tt>\n"
5896"             header is added by Mailman, although if one is present in the\n"
5897"             original message, it is not stripped.  Setting this value to\n"
5898"             either <em>This list</em> or <em>Explicit address</em> causes\n"
5899"             Mailman to insert a specific <tt>Reply-To:</tt> header in all\n"
5900"             messages, overriding the header in the original message if\n"
5901"             necessary (<em>Explicit address</em> inserts the value of <a\n"
5902"             href=\"?VARHELP=general/reply_to_address\">reply_to_address</"
5903"a>).\n"
5904"\n"
5905"             <p>There are many reasons not to introduce or override the\n"
5906"             <tt>Reply-To:</tt> header.  One is that some posters depend on\n"
5907"             their own <tt>Reply-To:</tt> settings to convey their valid\n"
5908"             return address.  Another is that modifying <tt>Reply-To:</tt>\n"
5909"             makes it much more difficult to send private replies.  See <a\n"
5910"             href=\"http://marc.merlins.org/netrants/reply-to-harmful.html"
5911"\">`Reply-To'\n"
5912"             Munging Considered Harmful</a> for a general discussion of "
5913"this\n"
5914"             issue.  See <a\n"
5915"             href=\"http://marc.merlins.org/netrants/reply-to-useful.html"
5916"\">\n"
5917"             Reply-To Munging Considered Useful</a> for a dissenting "
5918"opinion.\n"
5919"\n"
5920"             <p>Some mailing lists have restricted posting privileges, with "
5921"a\n"
5922"             parallel list devoted to discussions.  Examples are `patches' "
5923"or\n"
5924"             `checkin' lists, where software changes are posted by a "
5925"revision\n"
5926"             control system, but discussion about the changes occurs on a\n"
5927"             developers mailing list.  To support these types of mailing\n"
5928"             lists, select <tt>Explicit address</tt> and set the\n"
5929"             <tt>Reply-To:</tt> address below to point to the parallel\n"
5930"             list."
5931msgstr ""
5932"���� � ������� ��������� �� ����������� ���\n"
5933"             <tt>��������-��:</tt> ������������ ��� Mailman ��� �������� ��� "
5934"������� ��� ���� ��\n"
5935"             �����.  ���� �������� ���� <em>���������</em>, ��� �����������\n"
5936"             <tt>Reply-To::</tt> ���� ����������� ��� �� Mailman, ��� �� "
5937"������� �������\n"
5938"             ��� ������ ������, ����� �� �����������.  � ������� ��� ����� "
5939"���\n"
5940"             <em>���� � �����</em> � ��� <em>���� ���������</em> �������� "
5941"��� ��������\n"
5942"             ���� ������������� <tt>Reply-To::</tt> ������������ ��� �� "
5943"Mailman �� ���\n"
5944"             �� ��������, � ����� ���������� ��� ������������ ��� ������ "
5945"������ �� ����\n"
5946"             ����� ���������� (� ������� <em>���� ���������</em> ������� "
5947"��� \n"
5948"���� ��� <a href=\"?VARHELP=general/reply_to_address"
5949"\">��������_����_���������</a>).\n"
5950" \n"
5951"             <p>�������� ���� ����� �� ��� �������������� � ������������ � "
5952"�����������\n"
5953"             <tt>Reply-To:</tt>. ���� ����� ��� ������� ���������� "
5954"����������\n"
5955"             ���� ����� ���� ��������� ��� �� <tt>Reply-To:</tt> ��� ��� "
5956"������ ��� �����\n"
5957"             ���� ������� ���������� ����������. ���� ����� ����� ��� � "
5958"����������� ��� \n"
5959"             <tt>�Reply-To:</tt> ����� ���� ��� ������� ��� �������� "
5960"��������� ����������.\n"
5961"             ����� �� <a href=\"http://marc.merlins.org/netrants/reply-to-"
5962"harmful.html\">`Reply-to'\n"
5963"             Munging Considered Harmful<a/> \n"
5964"             ��� ��� ������ �������� ����� ��� �������.\n"
5965"����� �� <a href=\"http://marc.merlins.org/netrants/reply-to-useful.html"
5966"\">Reply-to\n"
5967"             Munging Considered Useful</a>\n"
5968"             ��� ��� �������� �����.\n"
5969"\n"
5970"             <p>������� ������ ����� ������������ ���������� ���������, �� "
5971"���\n"
5972"             ��������� ����� ���������� ���� ����������.  ������ "
5973"������������ �����\n"
5974"             ������ ���� `patches' � `checkin', ��� ������, �� ������� ��� "
5975"��������� ����������\n"
5976"             ��� ��� ������� ������� ��������, ���� � �������� ��� ��� "
5977"������� ����������������\n"
5978"             ��� ����� ��� ���������������.  ��� ��� ���������� ����� ��� "
5979"����� ������,\n"
5980"             �������� <tt>���� ���������</tt> ��� ������ ��� <tt>Reply-To:</"
5981"tt>\n"
5982"             ��������� �������� �� ������� ���� ��������� �����."
5983
5984#: Mailman/Gui/General.py:274
5985msgid "Explicit <tt>Reply-To:</tt> header."
5986msgstr "���� ����������� <tt>Reply-To:</tt>."
5987
5988#: Mailman/Gui/General.py:276
5989msgid ""
5990"This is the address set in the <tt>Reply-To:</tt> header\n"
5991"             when the <a\n"
5992"             href=\"?VARHELP=general/reply_goes_to_list"
5993"\">reply_goes_to_list</a>\n"
5994"             option is set to <em>Explicit address</em>.\n"
5995"\n"
5996"             <p>There are many reasons not to introduce or override the\n"
5997"             <tt>Reply-To:</tt> header.  One is that some posters depend on\n"
5998"             their own <tt>Reply-To:</tt> settings to convey their valid\n"
5999"             return address.  Another is that modifying <tt>Reply-To:</tt>\n"
6000"             makes it much more difficult to send private replies.  See <a\n"
6001"             href=\"http://marc.merlins.org/netrants/reply-to-harmful.html"
6002"\">`Reply-To'\n"
6003"             Munging Considered Harmful</a> for a general discussion of "
6004"this\n"
6005"             issue.  See <a\n"
6006"             href=\"http://marc.merlins.org/netrants/reply-to-useful.html"
6007"\">\n"
6008"             Reply-To Munging Considered Useful</a> for a dissenting "
6009"opinion.\n"
6010"\n"
6011"             <p>Some mailing lists have restricted posting privileges, with "
6012"a\n"
6013"             parallel list devoted to discussions.  Examples are `patches' "
6014"or\n"
6015"             `checkin' lists, where software changes are posted by a "
6016"revision\n"
6017"             control system, but discussion about the changes occurs on a\n"
6018"             developers mailing list.  To support these types of mailing\n"
6019"             lists, specify the explicit <tt>Reply-To:</tt> address here.  "
6020"You\n"
6021"             must also specify <tt>Explicit address</tt> in the\n"
6022"             <tt>reply_goes_to_list</tt>\n"
6023"             variable.\n"
6024"\n"
6025"             <p>Note that if the original message contains a\n"
6026"             <tt>Reply-To:</tt> header, it will not be changed."
6027msgstr ""
6028"���� ����� � ��������� ��� �������� ���� ����������� <tt>��������-��:</tt>\n"
6029"             ���� � <a href=\"?VARHELP=general/reply_goes_to_list"
6030"\">��������_��������_����_����� </a>\n"
6031"             ������� �������� ��� <em>���� ���������</em>.\n"
6032" \n"
6033"             <p>�������� ���� ����� ��� �� ��� �������������� � �� "
6034"������������ �\n"
6035"             ����������� <tt>��������-��:</tt>. ���� ����� ��� ������� "
6036"���������� ����������\n"
6037"             ���� ����� ���� ��������� ��� ��� <tt>��������-��:</tt> ��� ��� "
6038"������ ��� �����\n"
6039"             ���� ������� ���������� ����������. ����� ����� ��� � "
6040"����������� ��� \n"
6041"             <tt>��������-��:</tt> ����� ���� ��� ������� ��� �������� "
6042"��������� ����������.\n"
6043"             ����� �� <a href=\"http://marc.merlins.org/netrants/reply-to-"
6044"harmful.html\">`Reply-To'\n"
6045"             Munging Considered Harmful </a>\n"
6046"             ��� ��� ������ �������� ����� ��� �������.  ����� �� <a href="
6047"\"http://marc.merlins.org/netrants/reply-to-useful.html\">Reply-to \n"
6048"             Munging Considered Useful </a> \n"
6049"             ��� ��� �������� �����.\n"
6050"\n"
6051"             <p>������� ������ ����� ������������ ���������� ���������, �� "
6052"���\n"
6053"             ��������� ����� ���������� ���� ����������.  ������ "
6054"������������ �����\n"
6055"             ������ ���� `patches' � `checkin', ���� ������, �� ������� ��� "
6056"��������� ����������\n"
6057"             ��� ��� ������� ������� ��������, ���� � �������� ��� ��� "
6058"������� ����������������\n"
6059"             ��� ����� ��� ���������������.  ��� ��� ���������� ����� ��� "
6060"����� ������,\n"
6061"             ������ �� <tt>Reply-to:</tt> ��������� ���. ������\n"
6062"             ������ �� ������� ��� <tt>���� ���������</tt> ���� ��������� \n"
6063"             <tt>�������� �������� ���� �����</tt>.\n"
6064"\n"
6065"             <p>������ �� ��������� ��� �� �� ������ ������ �������� ��� "
6066"����������� \n"
6067"             <tt>Reply-to:</tt>, ���� ��� �� �������."
6068
6069#: Mailman/Gui/General.py:305
6070msgid "Umbrella list settings"
6071msgstr "�������������� ��������� ������"
6072
6073#: Mailman/Gui/General.py:308
6074msgid ""
6075"Send password reminders to, eg, \"-owner\" address instead of\n"
6076"             directly to user."
6077msgstr ""
6078"�������� ������������ ��� ���� �������� ����, �.�., \"-owner\" ����������� "
6079"����\n"
6080"             ���� ������ ���������."
6081
6082#: Mailman/Gui/General.py:311
6083msgid ""
6084"Set this to yes when this list is intended to cascade only\n"
6085"             to other mailing lists.  When set, meta notices like\n"
6086"             confirmations and password reminders will be directed to an\n"
6087"             address derived from the member's address - it will have the\n"
6088"             value of \"umbrella_member_suffix\" appended to the member's\n"
6089"             account name."
6090msgstr ""
6091"������ ���� ��� ������� �� ��� ���� ���� � ����� ����������� ���� ��� �� "
6092"�������� ��������\n"
6093"             ����� ������.  ���� �������, ������������ meta, ����\n"
6094"             ������������� ��� ������������ �������, �� ������������ �� ���\n"
6095"             ��������� � ����� ��������� ��� �� ��������� ��� ������ - �� "
6096"����\n"
6097"             ��� ���� ��� \"umbrella_member_suffix\" ������������ ��� �����\n"
6098"             ��� ����������� ��� ������."
6099
6100#: Mailman/Gui/General.py:319
6101msgid ""
6102"Suffix for use when this list is an umbrella for other\n"
6103"             lists, according to setting of previous \"umbrella_list\"\n"
6104"             setting."
6105msgstr ""
6106"�������� � ����� ������ �� ��������������� ���� ���� � ����� �������� \n"
6107"             ������ (umbrella_list) ��� ����� ������, ������� �� ��� "
6108"������������ \"umbrella_list\"\n"
6109"             ���������."
6110
6111#: Mailman/Gui/General.py:323
6112msgid ""
6113"When \"umbrella_list\" is set to indicate that this list has\n"
6114"             other mailing lists as members, then administrative notices "
6115"like\n"
6116"             confirmations and password reminders need to not be sent to "
6117"the\n"
6118"             member list addresses, but rather to the owner of those member\n"
6119"             lists.  In that case, the value of this setting is appended to\n"
6120"             the member's account name for such notices.  `-owner' is the\n"
6121"             typical choice.  This setting has no effect when \"umbrella_list"
6122"\"\n"
6123"             is \"No\"."
6124msgstr ""
6125"���� ���� ��������� \"umbrella_list\", �������� ��� �� ������� ��� ���� � "
6126"����� ����\n"
6127"             ����� ������ �� ����, ���� �� ������������� �������� ���� ��\n"
6128"             ������������� ��� �� ������������ ������� �� ���������� �� \n"
6129"             ���������� ���� ����������� ��� ����� ��� ������, ���� �����\n"
6130"             ����������� �� ���������� ���� ��������� ��� ���� ������-"
6131"������.\n"
6132"             �� ���� ��� ���������, � ���� ����� ��� ���������� ����������� "
6133"���\n"
6134"             ����� ��� ����������� ��� ������ ��� ������� ������������. \n"
6135"             � `-owner' ����� � ������ �������.  ���� � ������� ��� ���� "
6136"�������� ���� � ������� \"umbrella_list\" ����� \"���\"."
6137
6138#: Mailman/Gui/General.py:335
6139msgid "Send monthly password reminders?"
6140msgstr "�� ������������� �������� ������������ ��� �������;"
6141
6142#: Mailman/Gui/General.py:337
6143msgid ""
6144"Turn this on if you want password reminders to be sent once\n"
6145"             per month to your members.  Note that members may disable "
6146"their\n"
6147"             own individual password reminders."
6148msgstr ""
6149"���� � ������� ������ �� ������������� �� ������ �� ������������ �������\n"
6150"�� ���������� ��� ���� ��� ��� ���� �� ����.  ������ �� \n"
6151"��������� ��� �� ���� ������� �� ���������������� ��� ����� ���� �������� "
6152"������������."
6153
6154#: Mailman/Gui/General.py:342
6155msgid ""
6156"List-specific text prepended to new-subscriber welcome\n"
6157"             message"
6158msgstr ""
6159"������� ������� �� �� ����� �� ����� ���������� ��� ���������\n"
6160"             ��� ����������� �� ��� �����"
6161
6162#: Mailman/Gui/General.py:345
6163msgid ""
6164"This value, if any, will be added to the front of the\n"
6165"             new-subscriber welcome message.  The rest of the welcome "
6166"message\n"
6167"             already describes the important addresses and URLs for the\n"
6168"             mailing list, so you don't need to include any of that kind of\n"
6169"             stuff here.  This should just contain mission-specific kinds "
6170"of\n"
6171"             things, like etiquette policies or team orientation, or that "
6172"kind\n"
6173"             of thing.\n"
6174"\n"
6175"             <p>Note that this text will be wrapped, according to the\n"
6176"             following rules:\n"
6177"             <ul><li>Each paragraph is filled so that no line is longer "
6178"than\n"
6179"                     70 characters.\n"
6180"                 <li>Any line that begins with whitespace is not filled.\n"
6181"                 <li>A blank line separates paragraphs.\n"
6182"             </ul>"
6183msgstr ""
6184"���� � ����, �� ���� �������, �� ��������� ������� ��� ��\n"
6185"             ������ ��� ����������� �� ��� �����.  ��� �������� ��� "
6186"��������� ���\n"
6187"             �� ����������� ������������� ���������� ����������� ��� URLs "
6188"��� ��\n"
6189"             �����, �������� �� ���������� �� ������������� ���� ������� ��� "
6190"����\n"
6191"             ���.  ���� �� ������� ������ ���� �� �������� ����������� "
6192"������� ��\n"
6193"             ��� �������� ��� ������, ���� ��������� ��� ������ � ��� "
6194"��������������\n"
6195"             ��� ������, � ���� ���� ������� �� ����.\n"
6196"\n"
6197"             <p>������ �� ��������� ��� ���� �� ������� �� ������������, \n"
6198"             ������� �� ���� ���������� �������:\n"
6199"             <ul><li>���� ���������� ������������� �� ������ ����� ���� "
6200"����� ������\n"
6201"                     �� ��� ����� ���������� ��� 70 ����������.\n"
6202"                 <li>���� ������ ��� ������ �� ���� ��������� �� "
6203"�������������.\n"
6204"                 <li>��� ���� ������ ����� �� ������������ ��� ����������.\n"
6205"             </ul>"
6206
6207#: Mailman/Gui/General.py:362
6208msgid "Send welcome message to newly subscribed members?"
6209msgstr "�������� ��������� �������������� ��� ��� ������������ ����;"
6210
6211#: Mailman/Gui/General.py:363
6212msgid ""
6213"Turn this off only if you plan on subscribing people manually\n"
6214"             and don't want them to know that you did so.  This option is "
6215"most\n"
6216"             useful for transparently migrating lists from some other "
6217"mailing\n"
6218"             list manager to Mailman."
6219msgstr ""
6220"��������������� ���� ��� ������� ���� �� ���������� �� ��������� ������� "
6221"�����������\n"
6222"             ��� �� ������ ����� �� �� ���������.  ���� � ������� ����� "
6223"�����������\n"
6224"             ������� ��� �� ������� �������� ��� ������ ��� ������ ���� "
6225"�������\n"
6226"             ����������� ������ ��� Mailman."
6227
6228#: Mailman/Gui/General.py:369
6229msgid ""
6230"Text sent to people leaving the list.  If empty, no special\n"
6231"             text will be added to the unsubscribe message."
6232msgstr ""
6233"�� ������� �� ����� ��������� ����� ������� ��� ��������� ��� ��� �����.\n"
6234"�� ����� ����, �� �� ��������� ������ ������ ������� ��� ������ ��������� "
6235"��� �� �����."
6236
6237#: Mailman/Gui/General.py:373
6238msgid "Send goodbye message to members when they are unsubscribed?"
6239msgstr "�������� ����������������� ��������� ��� ���� ���� ���� ������������;"
6240
6241#: Mailman/Gui/General.py:376
6242msgid ""
6243"Should the list moderators get immediate notice of new\n"
6244"             requests, as well as daily notices about collected ones?"
6245msgstr ""
6246"������ �� ����������� ��� ������ �� ��������� ������ ������������ ����\n"
6247"             ���������, ����� ��� ��������� ������������ ��� �� �������� ��� "
6248"�����\n"
6249"             ������������;"
6250
6251#: Mailman/Gui/General.py:379
6252msgid ""
6253"List moderators (and list administrators) are sent daily\n"
6254"             reminders of requests pending approval, like subscriptions to "
6255"a\n"
6256"             moderated list, or postings that are being held for one reason "
6257"or\n"
6258"             another.  Setting this option causes notices to be sent\n"
6259"             immediately on the arrival of new requests as well."
6260msgstr ""
6261"�� ����������� ��� ������ (��� �� ������������ ��� ������) \n"
6262"             ��������� ��������� ������������ ��� �� �������� ��� ���������� "
6263"�������,\n"
6264"             ���� ����� �� �������� �� ������ ��� ������� �����������, � "
6265"�������� ��\n"
6266"             ����� ���������� ��� ������ ����.  � ������� ����� ��� �������� "
6267"��������\n"
6268"             ��� ����� �������� ��� ���� ���������."
6269
6270#: Mailman/Gui/General.py:386
6271msgid ""
6272"Should administrator get notices of subscribes and\n"
6273"             unsubscribes?"
6274msgstr ""
6275"������ �� ��������� �� ������������ ������������ ���\n"
6276"             ��� �������� ��� ��� ���������;"
6277
6278#: Mailman/Gui/General.py:391
6279msgid "Send mail to poster when their posting is held for approval?"
6280msgstr ""
6281"�������� ��������� ���� ��������� ���� �� ������ ��� ��������� ��� �������;"
6282
6283#: Mailman/Gui/General.py:394
6284msgid "Additional settings"
6285msgstr "��������� ���������"
6286
6287#: Mailman/Gui/General.py:397
6288msgid "Emergency moderation of all list traffic."
6289msgstr "��������� ���������� ���� ��� ������� ��� ������."
6290
6291#: Mailman/Gui/General.py:398
6292msgid ""
6293"When this option is enabled, all list traffic is emergency\n"
6294"             moderated, i.e. held for moderation.  Turn this option on when\n"
6295"             your list is experiencing a flamewar and you want a cooling "
6296"off\n"
6297"             period."
6298msgstr ""
6299"���� ���� � ������� �������������, � ���������� ��� ������� ���\n"
6300"             ������ ������� �� ��� ������� ��� � ����� ��������� �� �������\n"
6301"             ���������, �.�. �� �������� ���������� ��� ������.  ���� �\n"
6302"             ������� ������ �� ������������� ���� � ����� ������������� ���\n"
6303"             �������� ��� ����� ��������� �� ������������ � ������ ���."
6304
6305#: Mailman/Gui/General.py:410
6306msgid ""
6307"Default options for new members joining this list.<input\n"
6308"             type=\"hidden\" name=\"new_member_options\" value=\"ignore\">"
6309msgstr ""
6310"��������������� �������� ��� �� ��� ���� ��� ����������� ��� �����:\n"
6311"<input type=\"hidden\" name=\"new_member_options\" value=\"ignore\">"
6312
6313#: Mailman/Gui/General.py:413
6314msgid ""
6315"When a new member is subscribed to this list, their initial\n"
6316"             set of options is taken from this variable's setting."
6317msgstr ""
6318"���� ��� ��� ����� ���������� �� ���� �� �����, �� ������� ���\n"
6319"             ��������� ��������� ��� ��� ��������� ����� ��� ����������."
6320
6321#: Mailman/Gui/General.py:417
6322msgid ""
6323"(Administrivia filter) Check postings and intercept ones\n"
6324"             that seem to be administrative requests?"
6325msgstr ""
6326"(������������� ������) ������� ��������� ��� ������� ����\n"
6327"             �������� �� ����� ������������� ��������;"
6328
6329#: Mailman/Gui/General.py:420
6330msgid ""
6331"Administrivia tests will check postings to see whether it's\n"
6332"             really meant as an administrative request (like subscribe,\n"
6333"             unsubscribe, etc), and will add it to the the administrative\n"
6334"             requests queue, notifying the administrator of the new "
6335"request,\n"
6336"             in the process."
6337msgstr ""
6338"�� �������������� ������� �� ������ �� �������� ��� �� ������������\n"
6339"             �� ��������� �������� ��� ������������� �������� (���� "
6340"��������,\n"
6341"             ���������, ���), ��� �� �� ���������� ���� ���� ��� "
6342"��������������\n"
6343"             ���������, ������������ ��� ������, �� ����������� ��� �� ��� "
6344"������."
6345
6346#: Mailman/Gui/General.py:427
6347msgid ""
6348"Maximum length in kilobytes (KB) of a message body.  Use 0\n"
6349"             for no limit."
6350msgstr ""
6351"������� ������� �� kilobytes (KB) ��� �������� ��� ���������.\n"
6352"             �������������� �� 0 ��� �� ��� ������� ����."
6353
6354#: Mailman/Gui/General.py:431
6355msgid ""
6356"Maximum number of members to show on one page of the\n"
6357"             Membership List."
6358msgstr ""
6359"�������� ������� ��� ����, ��� �� ������������\n"
6360"             ��� ����� ��� �����."
6361
6362#: Mailman/Gui/General.py:435
6363msgid "Host name this list prefers for email."
6364msgstr ""
6365"�� ����� ��� ���������� �� ����� ���������� ��� ��� ����� ��� �� email."
6366
6367#: Mailman/Gui/General.py:437
6368msgid ""
6369"The \"host_name\" is the preferred name for email to\n"
6370"             mailman-related addresses on this host, and generally should "
6371"be\n"
6372"             the mail host's exchanger address, if any.  This setting can "
6373"be\n"
6374"             useful for selecting among alternative names of a host that "
6375"has\n"
6376"             multiple addresses."
6377msgstr ""
6378"�� \"host_name\" ����� �� ����������� ����� ��� ��� ��������\n"
6379"             ��������� �� �������� �� �� mailman ����������� �� ���� �� "
6380"����������,\n"
6381"             ��� ������ �� ������ �� ����� � ����������� ��������� "
6382"�������������\n"
6383"             ��� server.  ���� � ������� ������ �� ����� ������� ��� ��� "
6384"�������\n"
6385"             ������� �� ����������� ������� ���� ���������� � ������ ���� "
6386"������\n"
6387"             �����������."
6388
6389#: Mailman/Gui/General.py:449
6390msgid ""
6391"Should messages from this mailing list include the\n"
6392"                 <a href=\"http://www.faqs.org/rfcs/rfc2369.html\">RFC 2369</"
6393"a>\n"
6394"                 (i.e. <tt>List-*</tt>) headers?  <em>Yes</em> is highly\n"
6395"                 recommended."
6396msgstr ""
6397"�� ������ �� �������� ��� ���� �� ����� �� ������������� ���\n"
6398"                 <a href=\"http://www.faqs.org/rfcs/rfc2369.html\">RFC 2369</"
6399"a>\n"
6400"                 (�.�. <tt>�����-*</tt>) ������������;  <em>���</em> ����� � "
6401"�������\n"
6402"                 ��� ����������."
6403
6404#: Mailman/Gui/General.py:454
6405msgid ""
6406"RFC 2369 defines a set of List-* headers that are\n"
6407"                 normally added to every message sent to the list "
6408"membership.\n"
6409"                 These greatly aid end-users who are using standards "
6410"compliant\n"
6411"                 mail readers.  They should normally always be enabled.\n"
6412"\n"
6413"                 <p>However, not all mail readers are standards compliant "
6414"yet,\n"
6415"                 and if you have a large number of members who are using\n"
6416"                 non-compliant mail readers, they may be annoyed at these\n"
6417"                 headers.  You should first try to educate your members as "
6418"to\n"
6419"                 why these headers exist, and how to hide them in their "
6420"mail\n"
6421"                 clients.  As a last resort you can disable these headers, "
6422"but\n"
6423"                 this is not recommended (and in fact, your ability to "
6424"disable\n"
6425"                 these headers may eventually go away)."
6426msgstr ""
6427"�� RFC 2369 ������ ��� ������ ��� ������������ �����-* �� ������\n"
6428"                 ������������ ��� ��������� �������� �� ���� ������ ��� "
6429"���������\n"
6430"                 ��� ���� ��� ������.  ����� ������� ���� ��� ������ ������ "
6431"���\n"
6432"                 ������������ ����������� ������������ ������������ �� "
6433"�����\n"
6434"                 ������� ��� ��������. �������� ������ ����� �� ����� "
6435"���������������.\n"
6436"\n"
6437"                 <p>������, ��� ����� ����� ��� �� ����������� ������������ "
6438"������������\n"
6439"                 ������� �� �� �������� ��� �� ����� ������� � ������� ��� "
6440"����� ��� \n"
6441"                 ������ ��� ������������� ������ �����������, ������ �� "
6442"�������������\n"
6443"                 �� ����� ��� ������������.  ������ ����� �� ����� "
6444"���������� �����������\n"
6445"                 ��� ����� ��� ���� ������ ������� ����� ��� ������������, "
6446"��� ��� ��� ������\n"
6447"                 �� ����� � �������� ���� ����� ������� �������������.  �� "
6448"��������� ���� �������\n"
6449"                 �� ���������������� ����� �� ������������, ���� ���� ��� "
6450"����� � ������������\n"
6451"                 ���� (��� ���� ��������������, � ���������� ��� �� "
6452"��������������� ����� ���\n"
6453"                 ������������ ������ �� ��� ������� ��� ������)."
6454
6455#: Mailman/Gui/General.py:472
6456msgid "Should postings include the <tt>List-Post:</tt> header?"
6457msgstr ""
6458"�� ������ �� �������� �� ��������� ��� ����������� <tt>�����-��������:</tt> ;"
6459
6460#: Mailman/Gui/General.py:473
6461msgid ""
6462"The <tt>List-Post:</tt> header is one of the headers\n"
6463"             recommended by\n"
6464"             <a href=\"http://www.faqs.org/rfcs/rfc2369.html\">RFC 2369</"
6465"a>.\n"
6466"             However for some <em>announce-only</em> mailing lists, only a\n"
6467"             very select group of people are allowed to post to the list; "
6468"the\n"
6469"             general membership is usually not allowed to post.  For lists "
6470"of\n"
6471"             this nature, the <tt>List-Post:</tt> header is misleading.\n"
6472"             Select <em>No</em> to disable the inclusion of this header. "
6473"(This\n"
6474"             does not affect the inclusion of the other <tt>List-*:</tt>\n"
6475"             headers.)"
6476msgstr ""
6477"� <tt>�����-��������:</tt> ����������� ����� ��� ��� ��� ������������\n"
6478"             ��� ������������ ��� ��\n"
6479"             <a href=\"http://www.faqs.org/rfcs/rfc2369.html\">RFC 2369</"
6480"a>.\n"
6481"             ������ ��� ������� <em>����-���������</em> ������ "
6482"�������������, ���� ���\n"
6483"             ���������� ����� �������� ���� �� ���������� ���������.\n"
6484"             �� �������� ���� ��� ����� ��� ������ �� ������� ��������. ���\n"
6485"             ����� ��� ������, � ����������� <tt>�����-��������:</tt> ����� "
6486"�������������.\n"
6487"             �������� <em>���</em> ��� �� ���������������� �� ����������� "
6488"����� ���\n"
6489"             ������������. (���� ��� ��������� ��� ����������� ��� ����� "
6490"<tt>�����-*:</tt> \n"
6491"             ������������.)"
6492
6493#: Mailman/Gui/General.py:489
6494msgid ""
6495"Should the <tt>Sender</tt> header be rewritten for this\n"
6496"                 mailing list to avoid stray bounces?  <em>Yes</em> is\n"
6497"                 recommended."
6498msgstr ""
6499"� ����������� <tt>���������� (Sender)</tt>  �� ����������� ��� ���� �� \n"
6500"                 ����� ��� ��� ������� ��������� ����������� (bounces): \n"
6501"                 <em>���</em> ����� � ������� ��� ����������"
6502
6503#: Mailman/Gui/General.py:493
6504msgid ""
6505"<a href=\"http://www.faqs.org/rfcs/rfc2822.html\">RFC\n"
6506"                 2822</a> defines the <tt>Sender</tt> header and defines it\n"
6507"                 as \"the mailbox of the agent responsible for the actual\n"
6508"                 transmission of the message.\"  Mailman replaces this "
6509"header\n"
6510"                 by default with the list's bounce address.\n"
6511"                 \n"
6512"                 <p>While it is debatable if Mailman is such an agent, "
6513"setting\n"
6514"                 this header helps directing bounces from some broken MTAs "
6515"to\n"
6516"                 the right destination.  On the other hand, some mail\n"
6517"                 readers show unexpected behaviour if this header is set "
6518"(like\n"
6519"                 missing addresses in forwarded mails and copies sent to "
6520"the\n"
6521"                 bounce address on reply-to-all), so it can be disabled \n"
6522"                 here."
6523msgstr ""
6524"<a href=\"http://www.faqs.org/rfcs/rfc2822.html\"> RFC \n"
6525"                  2822 </ a> ������ �� Sender <tt> </ tt> header ��� �� "
6526"��������� \n"
6527"                  �� �� ��������������� ��� agent ��� ����� ��������� ��� "
6528"��� ���������� \n"
6529"                  �������� ��� ���������. �� Mailman ����������� ���� ��  "
6530"����������� \n"
6531"                 �� ������� �� �� ��������� ���������� ��� ������. \n"
6532"\n"
6533"               <p>�� ��� ����� ���������� �� Mailman ����� ����  ������� "
6534"agent,� �������  \n"
6535"                ����� ��� ������������ ����� ��� ���������� ����������� ��� "
6536"������ ������������ MTA \n"
6537"                ��� ����� ���������. ��� ��� ���� ������, ���������  \n"
6538"                ���������� ��������� �������� ����������� �����������, �� "
6539"���� � �������� ����� ����������(���� \n"
6540"�������� ����������� �� ����������� �������� ��� ��������� ��� ������������� "
6541"��� \n"
6542"��������� ���������� �� ��� ��������-��-���), ������� ����� ������ �� "
6543"��������������� \n"
6544"              ��� ������ ����"
6545
6546#: Mailman/Gui/General.py:512
6547msgid "Should duplicate avoidance drop addresses from Cc: headers"
6548msgstr ""
6549
6550#: Mailman/Gui/General.py:513
6551msgid ""
6552"The process which avoids sending a list copy of a message to\n"
6553"               a member who is also directly addressed in To: or Cc: can "
6554"drop\n"
6555"               the address from Cc: to avoid growing a long Cc: list in "
6556"long\n"
6557"               threads.  This can be undesirable as it can break DKIM\n"
6558"               signatures and possibly cause confusion.  To avoid changes "
6559"to\n"
6560"               Cc: headers, set this to No."
6561msgstr ""
6562
6563#: Mailman/Gui/General.py:524
6564msgid ""
6565"Discard held messages older than this number of days.\n"
6566"            Use 0 for no automatic discarding."
6567msgstr ""
6568"��������� ����� ��������� �� ��������� �������� ��� ����� ���������� ��� "
6569"����� ��� ������ ������.\n"
6570"            �������������� �� 0 ��� �� �������� �������� ����� ���������."
6571
6572#: Mailman/Gui/General.py:534
6573msgid ""
6574"<b>real_name</b> attribute not\n"
6575"            changed!  It must differ from the list's name by case\n"
6576"            only."
6577msgstr ""
6578"� ��������  <b>��������_�����</b> ���\n"
6579"            ������!  ������ �� �������� ��� �� ����� ��� ������\n"
6580"            ���� ��� ����� ��� ���������� (��� ����� �������� ���\n"
6581"            �� ����������)."
6582
6583#: Mailman/Gui/General.py:562
6584msgid ""
6585"The <b>info</b> attribute you saved\n"
6586"contains suspicious HTML that could potentially expose your users to cross-"
6587"site\n"
6588"scripting attacks.  This change has therefore been rejected.  If you still "
6589"want\n"
6590"to make these changes, you must have shell access to your Mailman server.\n"
6591"This change can be made with bin/withlist or with bin/config_list by "
6592"setting\n"
6593"mlist.info.\n"
6594"                        "
6595msgstr ""
6596"� <b> ���������� (info)</ b> ��� ������������ \n"
6597"�������� ������ HTML ������ ��� �� �������� ��  �����ei ���� ������� ��� "
6598"��cross-site \n"
6599"��������� scripting. ���� � ������ ���� �� �� ������ ������������. ��� ��� "
6600"���������� \n"
6601"�� ������ ����� ��� �������, �� ������ �� ����� �������� ��� ������� ��� "
6602"���������� Mailman.\n"
6603"���� � ������ ������ �� ����� �� bin/withlist � �� bin/config_list �� "
6604"��������� \n"
6605"mlist.info. \n"
6606"                        "
6607
6608#: Mailman/Gui/General.py:573
6609msgid ""
6610"<b>admin_member_chunksize</b> attribute not\n"
6611"            changed!  It must be an integer > 0."
6612msgstr ""
6613"<b>admin_member_chunksize</b> � �������� ���\n"
6614"            ������!  ������  �� ����� ���� �������� > 0."
6615
6616#: Mailman/Gui/General.py:579
6617#, fuzzy
6618msgid ""
6619"<b>host_name</b> attribute not changed!\n"
6620"                It must be a valid domain name."
6621msgstr ""
6622"<b>admin_member_chunksize</b> � �������� ���\n"
6623"            ������!  ������  �� ����� ���� �������� > 0."
6624
6625#: Mailman/Gui/General.py:591
6626msgid ""
6627"You cannot add a Reply-To: to an explicit\n"
6628"            address if that address is blank.  Resetting these values."
6629msgstr ""
6630"�� �������� �� ���������� ��� Reply-To: �� ��� ����\n"
6631"            ��������� �� ���� � ��������� ����� ����.  ������� ������������\n"
6632"            ����� ��� �����."
6633
6634#: Mailman/Gui/Language.py:34
6635msgid "Language&nbsp;options"
6636msgstr "��������&nbsp;�������"
6637
6638#: Mailman/Gui/Language.py:66
6639msgid "Natural language (internationalization) options."
6640msgstr "�������� ������� ������� (��������� �� ����� �������)"
6641
6642#: Mailman/Gui/Language.py:71
6643msgid "Default language for this list."
6644msgstr "�������������� ������ ��� ���� �� �����."
6645
6646#: Mailman/Gui/Language.py:72
6647msgid ""
6648"This is the default natural language for this mailing list.\n"
6649"             If <a href=\"?VARHELP=language/available_languages\">more than "
6650"one\n"
6651"             language</a> is supported then users will be able to select "
6652"their\n"
6653"             own preferences for when they interact with the list.  All "
6654"other\n"
6655"             interactions will be conducted in the default language.  This\n"
6656"             applies to both web-based and email-based messages, but not to\n"
6657"             email posted by list members."
6658msgstr ""
6659"���� ����� � �������������� ������ ������ ��� ���� �� �����.\n"
6660"             �� �������������� <a href=\"?VARHELP=language/"
6661"available_languages\">������������ ���\n"
6662"             ��� �������</a> ���� �� ������� �� ������� �� ������ ��� ����� "
6663"����\n"
6664"             ��������� ��� ��� ������������� ���� �� �� �����. ���� �� "
6665"�����\n"
6666"             ��������������� �� �������� ���� �������������� ������.  ����\n"
6667"             ������ ���� ��� ��������� �� web ��� ��� ��� ��������� �� email "
6668"��������, ���� \n"
6669"             ��� ��� �������� ��� ���������� ��� �� ���� ��� ������."
6670
6671#: Mailman/Gui/Language.py:82
6672msgid "Languages supported by this list."
6673msgstr "������� ��� �������������� ��� ���� �� �����."
6674
6675#: Mailman/Gui/Language.py:84
6676msgid ""
6677"These are all the natural languages supported by this list.\n"
6678"             Note that the\n"
6679"             <a href=\"?VARHELP=language/preferred_language\">default\n"
6680"             language</a> must be included."
6681msgstr ""
6682"����� ����� ���� �� ������� ������� ��� �������������� ��� ���� �� �����.\n"
6683"             ��������� ��� �\n"
6684"             <a href=\"?VARHELP=language/preferred_language\">�������������\n"
6685"             ������</a> ������ �� �����������������."
6686
6687#: Mailman/Gui/Language.py:90
6688msgid "Always"
6689msgstr "�����"
6690
6691#: Mailman/Gui/Language.py:90
6692msgid "As needed"
6693msgstr "���� ����������"
6694
6695#: Mailman/Gui/Language.py:90
6696msgid "Never"
6697msgstr "����"
6698
6699#: Mailman/Gui/Language.py:91
6700msgid ""
6701"Encode the\n"
6702"             <a href=\"?VARHELP=general/subject_prefix\">subject\n"
6703"             prefix</a> even when it consists of only ASCII characters?"
6704msgstr ""
6705"������������ ��\n"
6706"             <a href=\"?VARHELP=general/subject_prefix\">����\n"
6707"             prefix</a> ����� �� �� ����������� ���� ��� ���������� ASCII;"
6708
6709#: Mailman/Gui/Language.py:95
6710msgid ""
6711"If your mailing list's default language uses a non-ASCII\n"
6712"             character set and the prefix contains non-ASCII characters, "
6713"the\n"
6714"             prefix will always be encoded according to the relevant\n"
6715"             standards.  However, if your prefix contains only ASCII\n"
6716"             characters, you may want to set this option to <em>Never</em> "
6717"to\n"
6718"             disable prefix encoding.  This can make the subject headers\n"
6719"             slightly more readable for users with mail readers that don't\n"
6720"             properly handle non-ASCII encodings.\n"
6721"\n"
6722"             <p>Note however, that if your mailing list receives both "
6723"encoded\n"
6724"             and unencoded subject headers, you might want to choose <em>As\n"
6725"             needed</em>.  Using this setting, Mailman will not encode "
6726"ASCII\n"
6727"             prefixes when the rest of the header contains only ASCII\n"
6728"             characters, but if the original header contains non-ASCII\n"
6729"             characters, it will encode the prefix.  This avoids an "
6730"ambiguity\n"
6731"             in the standards which could cause some mail readers to "
6732"display\n"
6733"             extra, or missing spaces between the prefix and the original\n"
6734"             header."
6735msgstr ""
6736"�� � ������������� ������ ��� ������ ��� ������������  \n"
6737"             ��� ������ ���������� ����� ��� ASCII ��� �� ������� �������� "
6738"���������� ����� ��� ASCII, ��\n"
6739"             ������� �� ������ ����� �� �������������� ������� �� ��� "
6740"�������� ������������. \n"
6741"             �� �������, �� �� ������� �������� ���� ���������� ASCII, \n"
6742"             ����� ������ �� ������� ��� ������� ���� �� <em>����</em> ��� "
6743"��\n"
6744"             ���������������� ��� ������������. ���� ������ �� ����� ��� "
6745"��������� ������������ \n"
6746"             ���� ��� ����������� ��� ������� �� ����������� ��������� "
6747"������������� ��� ���\n"
6748"             ����������� ����� �������������� ��� ���������� ����� ��� "
6749"������� ASCII.\n"
6750"\n"
6751"             <p>��������� ������, ��� �� � ����� ������������� ������� "
6752"���������������\n"
6753"             ��� �� ��������������� ��������� ������������, �������� �� "
6754"��������� <em>���� \n"
6755"             ����������</em>. �� ����� ����� ��� ��������, � Mailman ��� �� "
6756"����������� ASCII\n"
6757"             ��������� ���� � �������� ����������� �������� ���� ����������\n"
6758"             �SCII, ���� �� � ������ ����������� �������� ���������� \n"
6759"             �����-ASCII, �� ����������� �� �������. ���� ��������� ��� "
6760"��������� ��� ������� \n"
6761"             ���� ������������ ��� � ����� ���� �� ���������� ������� "
6762"���������� e-mail �� ����������\n"
6763"             �������� ���� � �� ����������� ���� ������� ��� ������� ��� ��� "
6764"������ \n"
6765"             �����������"
6766
6767#: Mailman/Gui/Membership.py:26
6768msgid "Membership&nbsp;Management..."
6769msgstr "����������&nbsp;�����..."
6770
6771#: Mailman/Gui/Membership.py:30
6772msgid "Membership&nbsp;List"
6773msgstr "�����&nbsp;�����"
6774
6775#: Mailman/Gui/Membership.py:31
6776msgid "Mass&nbsp;Subscription"
6777msgstr "������&nbsp;�������"
6778
6779#: Mailman/Gui/Membership.py:32
6780msgid "Mass&nbsp;Removal"
6781msgstr "������&nbsp;��������"
6782
6783#: Mailman/Gui/Membership.py:33
6784#, fuzzy
6785msgid "Address&nbsp;Change"
6786msgstr "���������/�����"
6787
6788#: Mailman/Gui/Membership.py:34
6789#, fuzzy
6790msgid "Sync&nbsp;Membership&nbsp;List"
6791msgstr "�����&nbsp;�����"
6792
6793#: Mailman/Gui/NonDigest.py:35
6794msgid "Non-digest&nbsp;options"
6795msgstr "�������� ��������� ���������"
6796
6797#: Mailman/Gui/NonDigest.py:43
6798msgid "Policies concerning immediately delivered list traffic."
6799msgstr "��������� ��� ������� ��� ������ ��� ����� ������������� ������."
6800
6801#: Mailman/Gui/NonDigest.py:46
6802msgid ""
6803"Can subscribers choose to receive mail immediately, rather\n"
6804"             than in batched digests?"
6805msgstr ""
6806"�� ������� �� ���� �� �������� �������� �����, ���� \n"
6807"             �� �������������� ��������;"
6808
6809#: Mailman/Gui/NonDigest.py:53
6810msgid "Full Personalization"
6811msgstr "������ �������������"
6812
6813#: Mailman/Gui/NonDigest.py:55
6814msgid ""
6815"Should Mailman personalize each non-digest delivery?\n"
6816"                 This is often useful for announce-only lists, but <a\n"
6817"                 href=\"?VARHELP=nondigest/personalize\">read the details</"
6818"a>\n"
6819"                 section for a discussion of important performance\n"
6820"                 issues."
6821msgstr ""
6822"���������� �� Mailman �� ������������ ���� �� ������������� (non-digest) "
6823"��������?\n"
6824"                 ���� ����� ����� ������� �� ������ ������������, ���� "
6825"<ahref=\"?VARHELP=nondigest/personalize\"> �������� ���� ������������</a>\n"
6826"                 ��� �������� ��� ��������� ����������� ��������."
6827
6828#: Mailman/Gui/NonDigest.py:61
6829msgid ""
6830"Normally, Mailman sends the regular delivery messages to\n"
6831"                 the mail server in batches.  This is much more efficent\n"
6832"                 because it reduces the amount of traffic between Mailman "
6833"and\n"
6834"                 the mail server.\n"
6835"\n"
6836"                 <p>However, some lists can benefit from a more "
6837"personalized\n"
6838"                 approach.  In this case, Mailman crafts a new message for\n"
6839"                 each member on the regular delivery list.  Turning this\n"
6840"                 feature on may degrade the performance of your site, so "
6841"you\n"
6842"                 need to carefully consider whether the trade-off is worth "
6843"it,\n"
6844"                 or whether there are other ways to accomplish what you "
6845"want.\n"
6846"                 You should also carefully monitor your system load to make\n"
6847"                 sure it is acceptable.\n"
6848"\n"
6849"                 <p>Select <em>No</em> to disable personalization and send\n"
6850"                 messages to the members in batches.  Select <em>Yes</em> "
6851"to\n"
6852"                 personalize deliveries and allow additional substitution\n"
6853"                 variables in message headers and footers (see below).  In\n"
6854"                 addition, by selecting <em>Full Personalization</em>, the\n"
6855"                 <code>To</code> header of posted messages will be modified "
6856"to\n"
6857"                 include the member's address instead of the list's posting\n"
6858"                 address.\n"
6859"\n"
6860"                 <p>When personalization is enabled, a few more expansion\n"
6861"                 variables can be included in the <a\n"
6862"                 href=\"?VARHELP=nondigest/msg_header\">message header</a> "
6863"and\n"
6864"                 <a href=\"?VARHELP=nondigest/msg_footer\">message footer</"
6865"a>.\n"
6866"\n"
6867"                 <p>These additional substitution variables will be "
6868"available\n"
6869"                 for your headers and footers, when this feature is "
6870"enabled:\n"
6871"\n"
6872"                 <ul><li><b>user_address</b> - The address of the user,\n"
6873"                         coerced to lower case.\n"
6874"                     <li><b>user_delivered_to</b> - The case-preserved "
6875"address\n"
6876"                         that the user is subscribed with.\n"
6877"                     <li><b>user_password</b> - The user's password.\n"
6878"                     <li><b>user_name</b> - The user's full name.\n"
6879"                     <li><b>user_optionsurl</b> - The url to the user's "
6880"option\n"
6881"                         page.\n"
6882"                 </ul>\n"
6883"                 "
6884msgstr ""
6885" ��������, �� Mailman ������� �� �������� ��������� ��������� ���� \n"
6886"                 ����������� e-mail �� ������.  ���� ����� ��� "
6887"��������������\n"
6888"                 ������ �������� �� ���� ��� ������ ������� ��� Mailman \n"
6889"                 ��� ����������� e-mail.\n"
6890"\n"
6891"                 <p>������, ������� ������ ����������� ��� ��� ��� "
6892"��������������� \n"
6893"                 ����������.  ���� ��������� ����, �� Mailman ������� ��� "
6894"��� ������ ��� \n"
6895"                 ���� ����� �� ��� ����� ��������� ���������. �������������� "
6896"����\n"
6897"                 �� �������������� ������ ��  ���������� �������� ������� "
6898"���� �������� ��� ����, ����\n"
6899"                  ������������ ���������� ����������  �� �� ��������� ����� "
6900"���� �����,\n"
6901"                 � �������� ����� ������ ��� �� �������� ���� ��� ������.\n"
6902"                 �� ������ ������ ���������� �� �������������� �� ������ ��� "
6903"����������\n"
6904"                 �� ����� �� ����� �������� ���  ��������� �� �������� "
6905"����.\n"
6906"\n"
6907"                 <p>�������� <em>No</em> ��� �� ���������������� ��� "
6908"������������� ��� �� ��������\n"
6909"                 �� �������� ��� ���� �� ������.  �������� <em>Yes</em> ���\n"
6910"                 ���������������� ����������  ��� �� ��������� �������� "
6911"�������������\n"
6912"                 ���������� ���� ������������ ��� �� ��������� ��� ��������� "
6913"(����� ��� ����).\n"
6914"                 ��������, ����������� <em>Full Personalization</em>, � "
6915"�����������\n"
6916"                 <code>To</code>  ��� ������������� ��������� �� "
6917"���������������� ���� ��\n"
6918"                 ������������� ��� ����������� ��� ����� ��� ������ ���� ��� "
6919"��������� ��� ������\n"
6920"\n"
6921"                 <p>���� ����� ��������������  � ������������� ��� ��������� "
6922"������� ����� ������������� ����������\n"
6923"                 ������� �� ��������������� ����  <ahref=\"?"
6924"VARHELP=nondigest/msg_header\">����������� ��� \n"
6925"���������</a> ��� n <a href=\"?VARHELP=nondigest/msg_footer\">��� ��������� "
6926"</a>.\n"
6927"\n"
6928"                 <p>����� �� ��������� ���������� ��������������  �� ������ "
6929"����������\n"
6930"                ��� ��� ������������ ��� ��������� ���, ���� ���� �� "
6931"�������������� �������������:\n"
6932"\n"
6933"                 <ul><li><b>user_address</b> - � ��������� ��� ������,\n"
6934"                         �� ��������� �� ����� ��������.\n"
6935"                     <li><b>user_delivered_to</b> - � ��������� ��� ������ "
6936"�� ��������� ��� �����/���������\n"
6937"                         �� ��� ����� � ������� �������� .\n"
6938"                     <li><b>user_password</b> - � ������� ��������� ��� "
6939"������ (password).\n"
6940"                     <li><b>user_name</b> - �� ������ ����� ��� ������.\n"
6941"                     <li><b>user_optionsurl</b> - �� url ���� ��� ������ "
6942"��������\n"
6943"                         ��� ������.\n"
6944"                 </ul>\n"
6945"                 "
6946
6947#: Mailman/Gui/NonDigest.py:110
6948msgid ""
6949"When <a href=\"?VARHELP=nondigest/personalize\">personalization</a> is "
6950"enabled\n"
6951"for this list, additional substitution variables are allowed in your "
6952"headers\n"
6953"and footers:\n"
6954"\n"
6955"<ul><li><b>user_address</b> - The address of the user,\n"
6956"        coerced to lower case.\n"
6957"    <li><b>user_delivered_to</b> - The case-preserved address\n"
6958"        that the user is subscribed with.\n"
6959"    <li><b>user_password</b> - The user's password.\n"
6960"    <li><b>user_name</b> - The user's full name.\n"
6961"    <li><b>user_optionsurl</b> - The url to the user's option\n"
6962"        page.\n"
6963"</ul>\n"
6964msgstr ""
6965"���� <a href=\"?VARHELP=nondigest/personalize\">personalization</a> ����� "
6966"��������������\n"
6967"��� ���� �� �����, ������������ ��������� ���������� �������������� ���� "
6968"������������ ��� \n"
6969"�� ��������� ���:\n"
6970"\n"
6971"                 <ul><li><b>user_address</b> - � ��������� ��� ������,\n"
6972"                         �� ��������� �� ����� ��������.\n"
6973"                     <li><b>user_delivered_to</b> - � ��������� ��� ������ "
6974"�� ��������� ��� �����/���������\n"
6975"                         �� ��� ����� � ������� �������� .\n"
6976"                     <li><b>user_password</b> - � ������� ��������� ��� "
6977"������ (password).\n"
6978"                     <li><b>user_name</b> - �� ������ ����� ��� ������.\n"
6979"                     <li><b>user_optionsurl</b> - �� url ���� ��� ������ "
6980"��������\n"
6981"                         ��� ������.\n"
6982"                 </ul>\n"
6983
6984#: Mailman/Gui/NonDigest.py:129
6985msgid "Header added to mail sent to regular list members"
6986msgstr ""
6987"� ����������� � ����� ����������� ���� ������������ ��� ��������� ���� �� "
6988"���� ��� ��������� ������"
6989
6990#: Mailman/Gui/NonDigest.py:130
6991msgid ""
6992"Text prepended to the top of every immediately-delivery\n"
6993"             message. "
6994msgstr ""
6995"������� �� ����� ���������� ���� ���� ���� ��������� ������\n"
6996"             ���������. "
6997
6998#: Mailman/Gui/NonDigest.py:134
6999msgid "Footer added to mail sent to regular list members"
7000msgstr ""
7001"��������� �� ����� ����������� ���� ������������ ��� ��������� ���� �� ���� "
7002"��� ��������� ������"
7003
7004#: Mailman/Gui/NonDigest.py:135
7005msgid ""
7006"Text appended to the bottom of every immediately-delivery\n"
7007"             message. "
7008msgstr ""
7009"������� �� ����� ���������� ��� ����� ���� ��������� ������ \n"
7010"             ���������. "
7011
7012#: Mailman/Gui/NonDigest.py:141
7013msgid "Scrub attachments of regular delivery message?"
7014msgstr ""
7015"��������������� �� �������������� ������ ��� �������� ������������� "
7016"���������;"
7017
7018#: Mailman/Gui/NonDigest.py:142
7019msgid ""
7020"When you scrub attachments, they are stored in the archive\n"
7021"             area and links are made in the message so that the member can\n"
7022"             access them via a web browser. If you want the attachments to\n"
7023"             totally disappear, you can use content filtering options."
7024msgstr ""
7025"���� ������������� �� �������������� �������� ������, ���� ������������� "
7026"���� ������� �������\n"
7027"             ��� ����������� ��������� ��� �������� ���� ���� � ������� �� "
7028"������\n"
7029"             �� ���� �������� ���� web browser. ��� ������ �� �������������� "
7030"�� ������������ ��������,\n"
7031"�������� �� ��������������� ��� �������� ��� ������� ������������."
7032
7033#: Mailman/Gui/NonDigest.py:149
7034msgid "Sibling lists"
7035msgstr "�������� ������"
7036
7037#: Mailman/Gui/NonDigest.py:152
7038msgid ""
7039"Other mailing lists on this site whose members are\n"
7040"             excluded from the regular (non-digest) delivery if those\n"
7041"             list addresses appear in a To: or Cc: header."
7042msgstr ""
7043"����� ������ �' ���� ��� ���������, ��� ������ �� ���� \n"
7044"              �� ����������� ��� ��� �������� (non-digest) ��������, �� "
7045"�����\n"
7046"              �� ������ ������������ ���� ����������� ����: (��:) � ����:"
7047"(cc:)"
7048
7049#: Mailman/Gui/NonDigest.py:155
7050msgid ""
7051"The list addresses should be written in full mail address\n"
7052"             format (e.g. mailman@example.com). Do not specify this list\n"
7053"             address mutually in the exclude list configuration page of the\n"
7054"             other list, or members of both lists won't get any message.\n"
7055"             Note also that the site administrator may prohibit cross "
7056"domain\n"
7057"             siblings."
7058msgstr ""
7059"�� ����������� ��� ������ �� ������ �� ������������  �� ��� �����\n"
7060"             ��������� ������������ ������������ (�.�. mailman@example."
7061"com). \n"
7062"             ��� ���������� �� ��������� ����� ��� ������ �������� ��� "
7063"������ ����������� ����������� ������, ���� \n"
7064"             ���� �����, ����� �� ���� ��� ��� ������  ��� �� ������ ������ "
7065"������. \n"
7066"             ��������� ������ ��� � ������������ ��� site ������ �� "
7067"����������� \n"
7068"             �������� ������ ���  ������ (cross-domain)"
7069
7070#: Mailman/Gui/NonDigest.py:163
7071msgid ""
7072"Ignore regular_exclude_lists of which the poster is not a\n"
7073"             member."
7074msgstr ""
7075
7076#: Mailman/Gui/NonDigest.py:165
7077msgid ""
7078"If a post is addressed to this list and to one or more of\n"
7079"             the exclude lists, regular members of those lists will not be\n"
7080"             sent the post from this list, but if the poster is not a "
7081"member\n"
7082"             of an excluded list, the post may not be accepted by that list\n"
7083"             which leaves the members of that list with no copy of the "
7084"post.\n"
7085"             Setting this to Yes ignores any of the exclude lists of which "
7086"the\n"
7087"             poster is not a member."
7088msgstr ""
7089
7090#: Mailman/Gui/NonDigest.py:174
7091msgid ""
7092"Other mailing lists on this site whose members are\n"
7093"             included in the regular (non-digest) delivery if those\n"
7094"             list addresses don't appear in a To: or Cc: header."
7095msgstr ""
7096" ����� ������ �� ����� ��� ��������� �� ���� ��� ������ \n"
7097"             ��������������� ���� ���o���� (non-digest) \n"
7098"             ��������, ��� �� ����������� ����� ��� ������ ��� ������������ "
7099"���� \n"
7100"             ����������� ����: (To:) � ����.: (Cc:)."
7101
7102#: Mailman/Gui/NonDigest.py:177
7103msgid ""
7104"The list addresses should be written in full mail address\n"
7105"             format (e.g. mailman@example.com). Note also that the site\n"
7106"             administrator may prohibit cross domain siblings."
7107msgstr ""
7108"�� ����������� ��� ������ �� ������ �� ������������  �� ��� ����� \n"
7109"             ��������� ������������ ������������ (�.�. mailman@example."
7110"com).\n"
7111"             ��������� ������ ��� � ������������ ��� site ������ �� "
7112"�����������\n"
7113"             �������� ������ ��� ������ (cross-domain)."
7114
7115#: Mailman/Gui/Passwords.py:27
7116msgid "Passwords"
7117msgstr "������� ���������"
7118
7119#: Mailman/Gui/Privacy.py:38
7120msgid "Privacy options..."
7121msgstr "�������� �������������..."
7122
7123#: Mailman/Gui/Privacy.py:42
7124msgid "Subscription&nbsp;rules"
7125msgstr "�������&nbsp;���������(��������)"
7126
7127#: Mailman/Gui/Privacy.py:43
7128msgid "Sender&nbsp;filters"
7129msgstr "������&nbsp;���������"
7130
7131#: Mailman/Gui/Privacy.py:44
7132msgid "Recipient&nbsp;filters"
7133msgstr "������&nbsp;���������"
7134
7135#: Mailman/Gui/Privacy.py:45
7136msgid "Spam&nbsp;filters"
7137msgstr "������&nbsp;����������� �������������"
7138
7139#: Mailman/Gui/Privacy.py:59 Mailman/Gui/Usenet.py:63
7140msgid "None"
7141msgstr "�����"
7142
7143#: Mailman/Gui/Privacy.py:60 Mailman/Gui/Privacy.py:83
7144msgid "Confirm"
7145msgstr "�����������"
7146
7147#: Mailman/Gui/Privacy.py:61 Mailman/Gui/Privacy.py:84
7148msgid "Require approval"
7149msgstr "�������"
7150
7151#: Mailman/Gui/Privacy.py:62 Mailman/Gui/Privacy.py:85
7152msgid "Confirm and approve"
7153msgstr "����������� ��� �������"
7154
7155#: Mailman/Gui/Privacy.py:64 Mailman/Gui/Privacy.py:87
7156msgid "What steps are required for subscription?<br>"
7157msgstr "���� ������ ����������� ��� ��� �������;<br>"
7158
7159#: Mailman/Gui/Privacy.py:65
7160msgid ""
7161"None - no verification steps (<em>Not\n"
7162"                           Recommended </em>)<br>\n"
7163"                           Confirm (*) - email confirmation step required "
7164"<br>\n"
7165"                           Require approval - require list administrator\n"
7166"                           Approval for subscriptions <br>\n"
7167"                           Confirm and approve - both confirm and approve\n"
7168"                           \n"
7169"                           <p>(*) when someone requests a subscription,\n"
7170"                           Mailman sends them a notice with a unique\n"
7171"                           subscription request number that they must reply "
7172"to\n"
7173"                           in order to subscribe.<br>\n"
7174"\n"
7175"                           This prevents mischievous (or malicious) people\n"
7176"                           from creating subscriptions for others without\n"
7177"                           their consent."
7178msgstr ""
7179"����� - ����� ������ ������������ (<em>���\n"
7180"                           ���������� </em>)<br>\n"
7181"                           ����������� (*) - ���������� �� ���� ������������ "
7182"�� e-mail<br>\n"
7183"                           ������� - ������� ��� ������ ��� �����������\n"
7184"                           ��� ������ ��� ��� ������� <br>\n"
7185"                           ����������� ��� ������� - ��� �� ��� ��� "
7186"����������� ��� ��������\n"
7187"                           \n"
7188"                           <p>(*) ���� ������� �������� ������� ��� �����,\n"
7189"                           �� Mailman ������� ��� ���������� �� ��� "
7190"��������\n"
7191"                           ������ ������� �������� ���� ����� ������ ����� "
7192"�� ���������\n"
7193"                           ����� ���� �� ��������.<br>\n"
7194"\n"
7195"                           ���� ��������� ����������� ��������� �� "
7196"�������������� �������� ��� ������ �����\n"
7197"                           ��� ����������� ����."
7198
7199#: Mailman/Gui/Privacy.py:88
7200msgid ""
7201"Confirm (*) - email confirmation required <br>\n"
7202"                           Require approval - require list administrator\n"
7203"                           approval for subscriptions <br>\n"
7204"                           Confirm and approve - both confirm and approve\n"
7205"                           \n"
7206"                           <p>(*) when someone requests a subscription,\n"
7207"                           Mailman sends them a notice with a unique\n"
7208"                           subscription request number that they must reply "
7209"to\n"
7210"                           in order to subscribe.<br> This prevents\n"
7211"                           mischievous (or malicious) people from creating\n"
7212"                           subscriptions for others without their consent."
7213msgstr ""
7214"����������� (*) - ���������� ����������� �� email <br>\n"
7215"                           ������� - ���������� ������� ��� �o� �����������\n"
7216"                           ��� ������ ��� ��� ������� <br>\n"
7217"                           ����������� ��� ������� - ����������� ��� �� ���, "
7218"��� ����������� ��� �������\n"
7219"                           \n"
7220"                           <p>(*) ���� ������� �������� ������� ��� �����,\n"
7221"                           � Mailman ������� ��� ���������� �� ��� ��������\n"
7222"                           ������ ������� �������� ���� ����� ������ ����� "
7223"�� ���������\n"
7224"                           ����� ���� �� ��������.<br>���� ���������\n"
7225"                           ����������� ��������� �� �������������� ��������\n"
7226"                           ��� ������ ����� �� ����������� ����."
7227
7228#: Mailman/Gui/Privacy.py:104
7229msgid ""
7230"This section allows you to configure subscription and\n"
7231"            membership exposure policy.  You can also control whether this\n"
7232"            list is public or not.  See also the\n"
7233"            <a href=\"%(admin)s/archive\">Archival Options</a> section for\n"
7234"            separate archive-related privacy settings."
7235msgstr ""
7236"A��� � ������� ��� ��������� �� ������������ �������� �������� \n"
7237"            ��� ��������� �����. ������ �������� �� �������� �� � ����� \n"
7238"            �� ����� ������� � ���. ����� ������ ��� ������� �� ���\n"
7239"            <a href=\"%(admin)s/archive\">�������� �������������</a> ���\n"
7240"            ���������� ��������� ����������������� ��� ����������� �� �� "
7241"�������� �����o \n"
7242"��� ������."
7243
7244#: Mailman/Gui/Privacy.py:110
7245msgid "Subscribing"
7246msgstr "������� �� �������"
7247
7248#: Mailman/Gui/Privacy.py:112
7249msgid ""
7250"Advertise this list when people ask what lists are on this\n"
7251"             machine?"
7252msgstr ""
7253"������������ ��� ������ ���� � ������ ������ ����� ������ �������� �' ���� \n"
7254"             �� ������;"
7255
7256#: Mailman/Gui/Privacy.py:118
7257msgid ""
7258"List of addresses (or regexps) whose subscriptions do not\n"
7259"             require approval."
7260msgstr ""
7261
7262#: Mailman/Gui/Privacy.py:121
7263#, fuzzy
7264msgid ""
7265"When subscription requires approval, addresses in this list\n"
7266"             are allowed to subscribe without administrator approval. Add\n"
7267"             addresses one per line. You may begin a line with a ^ "
7268"character\n"
7269"             to designate a (case insensitive) regular expression match."
7270msgstr ""
7271"�� ����������� �' ���� �� ����� ����� ������������� ���� ��� �������\n"
7272"             �' ���� �� ����� �������������, ����� �� ���������� �������� "
7273"����������.  ���������\n"
7274"             ��� ����������� ��� �� ���� ������. ������� �� ������ �� ��� "
7275"��������� ^ ��� ��\n"
7276"             �������� ��������� �� ���� ��� �������� �������."
7277
7278#: Mailman/Gui/Privacy.py:126
7279msgid ""
7280"You may also use the @listname notation to designate the\n"
7281"             members of another list in this installation."
7282msgstr ""
7283
7284#: Mailman/Gui/Privacy.py:130
7285msgid ""
7286"Is the list moderator's approval required for unsubscription\n"
7287"             requests?  (<em>No</em> is recommended)"
7288msgstr ""
7289"�� ���������� � ������� ���  ���������� ��� ������ �� �������� \n"
7290"             ��������� ��� �� �����;  (����������� <em>���</em>)"
7291
7292#: Mailman/Gui/Privacy.py:133
7293msgid ""
7294"When members want to leave a list, they will make an\n"
7295"             unsubscription request, either via the web or via email.\n"
7296"             Normally it is best for you to allow open unsubscriptions so "
7297"that\n"
7298"             users can easily remove themselves from mailing lists (they "
7299"get\n"
7300"             really upset if they can't get off lists!).\n"
7301"\n"
7302"             <p>For some lists though, you may want to impose moderator\n"
7303"             approval before an unsubscription request is processed.  "
7304"Examples\n"
7305"             of such lists include a corporate mailing list that all "
7306"employees\n"
7307"             are required to be members of."
7308msgstr ""
7309"���� ������ ���� �������� �� ������������� ��� �����, �� ������ �� ������ "
7310"��� \n"
7311"             ������ ���������, ���� ���� web ���� ���� e-mail.\n"
7312"             �������� ����� �������� ��� ��� �� ���������� �������� �������� "
7313"��� �� ����� ���� ����\n"
7314"             �� ������� �� ������� ������ �� ���������� ���� ������� ���� "
7315"��� ��� ������.\n"
7316"\n"
7317"             <p>��� ������� ������ ����, ������ �� ������ �� ��������� ��� "
7318"������� \n"
7319"             ��� ���������� ���� �� ������ ��������� ����������. "
7320"������������\n"
7321"             ������� ������ ������������� ��� ����� �� ��� �������� ���� "
7322"����� ���� �� ����������� \n"
7323"             ���������� �� ����� ����."
7324
7325#: Mailman/Gui/Privacy.py:144
7326msgid "Ban list"
7327msgstr "����� �����������"
7328
7329#: Mailman/Gui/Privacy.py:146
7330msgid ""
7331"List of addresses which are banned from membership in this\n"
7332"             mailing list."
7333msgstr ""
7334"����� ����������� �� ������ ����� ������������� ��� ��� �������� ��� ������\n"
7335"             �' ���� �� �����."
7336
7337#: Mailman/Gui/Privacy.py:149
7338msgid ""
7339"Addresses in this list are banned outright from subscribing\n"
7340"             to this mailing list, with no further moderation required.  "
7341"Add\n"
7342"             addresses one per line; start the line with a ^ character to\n"
7343"             designate a regular expression match."
7344msgstr ""
7345"�� ����������� �' ���� �� ����� ����� ������������� ���� ��� �������\n"
7346"             �' ���� �� ����� �������������, ����� �� ���������� �������� "
7347"����������.  ���������\n"
7348"             ��� ����������� ��� �� ���� ������. ������� �� ������ �� ��� "
7349"��������� ^ ��� ��\n"
7350"             �������� ��������� �� ���� ��� �������� �������."
7351
7352#: Mailman/Gui/Privacy.py:154
7353msgid "Membership exposure"
7354msgstr "��������� �����"
7355
7356#: Mailman/Gui/Privacy.py:156
7357msgid "Anyone"
7358msgstr "� �������"
7359
7360#: Mailman/Gui/Privacy.py:156
7361msgid "List admin only"
7362msgstr "���� � ������������ ��� ������"
7363
7364#: Mailman/Gui/Privacy.py:156
7365msgid "List members"
7366msgstr "�� ���� ��� ������"
7367
7368#: Mailman/Gui/Privacy.py:157
7369msgid "Who can view subscription list?"
7370msgstr "����� ������ �� ��� ��� ����� ��� ������������� �����"
7371
7372#: Mailman/Gui/Privacy.py:159
7373msgid ""
7374"When set, the list of subscribers is protected by member or\n"
7375"             admin password authentication."
7376msgstr ""
7377"���� ��������, � ����� ��� ����� ������������� �� ���������� ������������\n"
7378"             �� ��� ������ ��������� ��� ������ � ��� �����������."
7379
7380#: Mailman/Gui/Privacy.py:163
7381msgid ""
7382"Show member addresses so they're not directly recognizable\n"
7383"             as email addresses?"
7384msgstr ""
7385"�������� ��� ����������� ��� ����� ���� ���� �� ��� ����� ����� "
7386"������������� \n"
7387"             �� e-mail �����������;"
7388
7389#: Mailman/Gui/Privacy.py:165
7390msgid ""
7391"Setting this option causes member email addresses to be\n"
7392"             transformed when they are presented on list web pages (both in\n"
7393"             text and as links), so they're not trivially recognizable as\n"
7394"             email addresses.  The intention is to prevent the addresses\n"
7395"             from being snarfed up by automated web scanners for use by\n"
7396"             spammers."
7397msgstr ""
7398"��������� ���� ��� ������� ������ �� ���������� �� email ����������� ��� "
7399"�����\n"
7400"             �� ����������������� ���� ������������ ���� ����������� ��� "
7401"������ (��� ��\n"
7402"             ������� ��� ��� ���������), ���� �� ��� ����� ������ "
7403"������������� ��\n"
7404"             email �����������. � ������ ����� �� ����������� ��� "
7405"����������� �� ����������� \n"
7406"             ��� ���������� web scanners ��� ����� ��� \n"
7407"             spammers."
7408
7409#: Mailman/Gui/Privacy.py:176
7410#, fuzzy
7411msgid "/Quarantine"
7412msgstr "����������"
7413
7414#: Mailman/Gui/Privacy.py:180
7415msgid ""
7416"When a message is posted to the list, a series of\n"
7417"            moderation steps are taken to decide whether a moderator must\n"
7418"            first approve the message or not.  This section contains the\n"
7419"            controls for moderation of both member and non-member postings.\n"
7420"\n"
7421"            <p>Member postings are held for moderation if their\n"
7422"            <b>moderation flag</b> is turned on.  You can control whether\n"
7423"            member postings are moderated by default or not.\n"
7424"\n"
7425"            <p>Non-member postings can be automatically\n"
7426"            <a href=\"?VARHELP=privacy/sender/accept_these_nonmembers\"\n"
7427"            >accepted</a>,\n"
7428"            <a href=\"?VARHELP=privacy/sender/hold_these_nonmembers\">held "
7429"for\n"
7430"            moderation</a>,\n"
7431"            <a href=\"?VARHELP=privacy/sender/reject_these_nonmembers\"\n"
7432"            >rejected</a> (bounced), or\n"
7433"            <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\"\n"
7434"            >discarded</a>,\n"
7435"            either individually or as a group.  Any\n"
7436"            posting from a non-member who is not explicitly accepted,\n"
7437"            rejected, or discarded, will have their posting filtered by the\n"
7438"            <a href=\"?VARHELP=privacy/sender/generic_nonmember_action"
7439"\">general\n"
7440"            non-member rules</a>.\n"
7441"\n"
7442"            <p>In the text boxes below, add one address per line; start the\n"
7443"            line with a ^ character to designate a <a href=\n"
7444"            \"https://docs.python.org/2/library/re.html\"\n"
7445"            >Python regular expression</a>.  When entering backslashes, do "
7446"so\n"
7447"            as if you were using Python raw strings (i.e. you generally "
7448"just\n"
7449"            use a single backslash).\n"
7450"\n"
7451"            <p>Note that non-regexp matches are always done first."
7452msgstr ""
7453"���� ��� ������ ������������ �� ��� �����, ���������������� ��� \n"
7454"            ����� ��� ������ ����������� ���� �� ����������� �� � "
7455"����������� ������\n"
7456"            ����� �� �������� �� ������ � ���. ���� �� ����� ������������ "
7457"��������\n"
7458"            ��� ��� ���������� ���� ��������� ��������� ��� �� ���� ��� ��� "
7459"�������� �����.\n"
7460"\n"
7461"            <p>�� ��������� ��� ����� ���������� ��� ���������� �� � ������� "
7462"���\n"
7463"            <b>���������� �����������</b> ����� ��������������.  �������� �� "
7464"�������� ��\n"
7465"            �� ��������� ��� ����� �� ���������� ��� ���������� ��' ������� "
7466"� ���.\n"
7467"\n"
7468"            <p>�� ��������� ����� ��� ����� ������� ��������\n"
7469"            <a href=\"?VARHELP=privacy/sender/accept_these_nonmembers\">N� "
7470"�������� ���������</a>,\n"
7471"            <a href=\"?VARHELP=privacy/sender/hold_these_nonmembers\">�� "
7472"����������\n"
7473"            ��� ����������</a>,\n"
7474"            <a href=\"?VARHELP=privacy/sender/reject_these_nonmembers\">�� "
7475"�������������</a> (�� ��������� ��� ���������), �\n"
7476"            <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\">�� "
7477"������������� ����� ��������� ��� ���������</a>,\n"
7478"            ���� ����������, ���� ��� �����.  ���� �������� ����� ��� �����  "
7479"� ����� ��� ������� ��������, ������������, � ������������ ����� ���������,\n"
7480"            �� ������� ��� ��� ����������� ��� �������\n"
7481"            <a href=\"?VARHELP=privacy/sender/generic_nonmember_action"
7482"\">�������\n"
7483"            ������� ����� ��� �����</a>.\n"
7484"\n"
7485"            <p>��� �������� ������� ��������, ��������� ��� ��������� �� "
7486"���� ������.  ������� \n"
7487"            �� ������ �� ��� ��������� ^ ��� �� �������� ��� <a href="
7488"\"https://docs.python.org/2/library/re.html\">Python regular expression</a>. "
7489"���� �������� �������� �������� (backslashes), \n"
7490"����� �� ��� \n"
7491"            �� ���������������� ����� ������������� Python  (�.�. �������� "
7492"������ \n"
7493"            �� �������������� ��� ���� ������� ������ (backslash)).\n"
7494"\n"
7495"            <p>��������� ��� ����� �� ������� ������� ��� ��������� non-"
7496"regexp."
7497
7498#: Mailman/Gui/Privacy.py:213
7499msgid "Member filters"
7500msgstr "������ ��� �� ����"
7501
7502#: Mailman/Gui/Privacy.py:216
7503msgid "By default, should new list member postings be moderated?"
7504msgstr ""
7505"�� �������, �� ������ ���� �������� ��� ���� ����� �� ����� ���������� ��� "
7506"��� ����������;"
7507
7508#: Mailman/Gui/Privacy.py:218
7509msgid ""
7510"Each list member has a <em>moderation flag</em> which says\n"
7511"             whether messages from the list member can be posted directly "
7512"to\n"
7513"             the list, or must first be approved by the list moderator.  "
7514"When\n"
7515"             the moderation flag is turned on, list member postings must be\n"
7516"             approved first.  You, the list administrator can decide whether "
7517"a\n"
7518"             specific individual's postings will be moderated or not.\n"
7519"\n"
7520"             <p>When a new member is subscribed, their initial moderation "
7521"flag\n"
7522"             takes its value from this option.  Turn this option off to "
7523"accept\n"
7524"             member postings by default.  Turn this option on to, by "
7525"default,\n"
7526"             moderate member postings first.  You can always manually set "
7527"an\n"
7528"             individual member's moderation bit by using the\n"
7529"             <a href=\"%(adminurl)s/members\">membership management\n"
7530"             screens</a>."
7531msgstr ""
7532"���� ����� ��� ������ ���� ��� <em>��������� ����������� </em> �� ����� "
7533"�������\n"
7534"             ���� ����� �� �������� ��� �� ���� ��� ������ ������� �� "
7535"������������� ���' �������\n"
7536"             ��� �����, � ������ �� ����������� ����� ��� ��� ����������. "
7537"����\n"
7538"             � ������� ����������� ����� ������, � �������� ��� �� ���� ��� "
7539"������ ������ \n"
7540"             ����� �� ��������.  �����, � ������������ ��� ������, �������� "
7541"�� ����������� ��\n"
7542"             ������������� ���������� ��������� �� ����� ����������� ��� "
7543"���������� � ��� ...\n"
7544"\n"
7545"             <p>���� ��� ��� ����� ����������, � ������ ������� "
7546"����������� \n"
7547"             ������� ���� ��� ���� ��� �������.  ���������������� ���� ��� "
7548"������� ��� ��  ���������� \n"
7549"             ��� ��������� ��� ����� �� �������. �������������� ���� ��� "
7550"�������, �� ����� �� �������,\n"
7551"             �� ����������� �� ���� �������� ��������� ������.  �������� "
7552"����� �� ������� \n"
7553"             ��� ������� ����������� ���� ����������� ������ "
7554"���������������\n"
7555"             <a href=\"%(adminurl)s/members\">��� ������ ����������� ����� </"
7556"a>."
7557
7558#: Mailman/Gui/Privacy.py:234
7559#, fuzzy
7560msgid ""
7561"Ceiling on acceptable number of member posts, per interval,\n"
7562"               before automatic moderation."
7563msgstr "���� ���� �������� ������ ���������� �� ��� �������� ���� �� �����."
7564
7565#: Mailman/Gui/Privacy.py:237
7566msgid ""
7567"If a member posts this many times, within a period of time\n"
7568"               the member is automatically moderated.  Use 0 to disable.  "
7569"See\n"
7570"               <a href=\"?VARHELP=privacy/sender/member_verbosity_interval"
7571"\"\n"
7572"               >member_verbosity_interval</a> for details on the time "
7573"period.\n"
7574"\n"
7575"               <p>This is intended to stop people who join a list or lists "
7576"and\n"
7577"               then use a bot to send many spam messages in a short "
7578"interval.\n"
7579"\n"
7580"               <p>Be careful when using this setting.  If it is set too "
7581"low,\n"
7582"               this can be triggered by a single post cross-posted to\n"
7583"               multiple lists or by a single post to an umbrella list."
7584msgstr ""
7585
7586#: Mailman/Gui/Privacy.py:250
7587msgid ""
7588"Number of seconds to remember posts to this list to determine\n"
7589"               member_verbosity_threshold for automatic moderation of a\n"
7590"               member."
7591msgstr ""
7592
7593#: Mailman/Gui/Privacy.py:254
7594msgid ""
7595"If a member's total posts to all lists in this installation\n"
7596"               with member_verbosity_threshold enabled reaches this list's\n"
7597"               member_verbosity_threshold, the member is automatically\n"
7598"               moderated on this list.\n"
7599"\n"
7600"               <p>Posts which are counted towards this list's\n"
7601"               member_verbosity_threshold are all posts to any list with\n"
7602"               member_verbosity_threshold enabled that arrived within that\n"
7603"               list's member_verbosity_interval."
7604msgstr ""
7605
7606#: Mailman/Gui/Privacy.py:266
7607msgid ""
7608"Action to take when a moderated member posts to the\n"
7609"             list."
7610msgstr ""
7611"�������� ��� ������ �� ����� ���� ��� ����� �� ����� ��������� ��� "
7612"���������� ������� ������ \n"
7613"             ��� �����."
7614
7615#: Mailman/Gui/Privacy.py:268
7616msgid ""
7617"<ul><li><b>Hold</b> -- this holds the message for approval\n"
7618"             by the list moderators.\n"
7619"\n"
7620"             <p><li><b>Reject</b> -- this automatically rejects the message "
7621"by\n"
7622"             sending a bounce notice to the post's author.  The text of the\n"
7623"             bounce notice can be <a\n"
7624"             href=\"?VARHELP=privacy/sender/member_moderation_notice\"\n"
7625"             >configured by you</a>.\n"
7626"\n"
7627"             <p><li><b>Discard</b> -- this simply discards the message, "
7628"with\n"
7629"             no notice sent to the post's author.\n"
7630"             </ul>"
7631msgstr ""
7632"<ul><li><b>�������</b> -- ��������� �� ������ ��� �������\n"
7633"             ��� ���� ����������� ��� ������.\n"
7634"\n"
7635"             <p><li><b>��������</b> -- �������� ������������ �� ������ \n"
7636"             ���������� ��� ���������� ��������� ���� �������� ��� "
7637"���������. To ������� \n"
7638"             ��� ����������� ������� ������ <ahref=\"?VARHELP=privacy/sender/"
7639"member_moderation_notice\">�� ����������� ��� ���</a>.\n"
7640"\n"
7641"             <p><li><b>�������� ����� ���������</b> -- ���� ������������ �� "
7642"������, �����\n"
7643"             ��� �������� ����������� ���� �������� ��� ���������.\n"
7644"             </ul>"
7645
7646#: Mailman/Gui/Privacy.py:282
7647msgid ""
7648"Text to include in any\n"
7649"             <a href=\"?VARHELP/privacy/sender/member_moderation_action\"\n"
7650"             >rejection notice</a> to\n"
7651"             be sent to moderated members who post to this list."
7652msgstr ""
7653"������� ��� �� ����������������� �� ����\n"
7654"             <a href=\"?VARHELP/privacy/sender/member_moderation_action\"\n"
7655"             >���������� ��������� </a> ���\n"
7656"             ��������� ��� ���������� ��� ���������� ���� �� ����� �������� "
7657"�������� �' ���� ��� �����."
7658
7659#: Mailman/Gui/Privacy.py:290
7660#, fuzzy
7661msgid ""
7662"Action to take when anyone posts to the\n"
7663"             list from a domain with a DMARC Reject%(quarantine)s Policy."
7664msgstr ""
7665"�������� ��� ������ �� ����� ���� ��� ����� �� ����� ��������� ��� "
7666"���������� ������� ������ \n"
7667"             ��� �����."
7668
7669#: Mailman/Gui/Privacy.py:293
7670#, fuzzy
7671msgid ""
7672"<ul><li><b>Munge From</b> -- applies the <a\n"
7673"             href=\"?VARHELP=general/from_is_list\">from_is_list Munge From</"
7674"a>\n"
7675"             transformation to these messages.\n"
7676"\n"
7677"             <p><li><b>Wrap Message</b> -- applies the <a\n"
7678"             href=\"?VARHELP=general/from_is_list\">from_is_list Wrap\n"
7679"             Message</a> transformation to these messages.\n"
7680"\n"
7681"             <p><li><b>Reject</b> -- this automatically rejects the message "
7682"by\n"
7683"             sending a bounce notice to the post's author.  The text of the\n"
7684"             bounce notice can be <a\n"
7685"             href=\"?VARHELP=privacy/sender/dmarc_moderation_notice\"\n"
7686"             >configured by you</a>.\n"
7687"\n"
7688"             <p><li><b>Discard</b> -- this simply discards the message, "
7689"with\n"
7690"             no notice sent to the post's author.\n"
7691"             </ul>\n"
7692"\n"
7693"             <p>This setting takes precedence over the <a\n"
7694"             href=\"?VARHELP=general/from_is_list\"> from_is_list</a> "
7695"setting\n"
7696"             if the message is From: an affected domain and the setting is\n"
7697"             other than Accept."
7698msgstr ""
7699"<ul><li><b>�������</b> -- ��������� �� ������ ��� �������\n"
7700"             ��� ���� ����������� ��� ������.\n"
7701"\n"
7702"             <p><li><b>��������</b> -- �������� ������������ �� ������ \n"
7703"             ���������� ��� ���������� ��������� ���� �������� ��� "
7704"���������. To ������� \n"
7705"             ��� ����������� ������� ������ <ahref=\"?VARHELP=privacy/sender/"
7706"member_moderation_notice\">�� ����������� ��� ���</a>.\n"
7707"\n"
7708"             <p><li><b>�������� ����� ���������</b> -- ���� ������������ �� "
7709"������, �����\n"
7710"             ��� �������� ����������� ���� �������� ��� ���������.\n"
7711"             </ul>"
7712
7713#: Mailman/Gui/Privacy.py:318
7714msgid ""
7715"Shall the above dmarc_moderation_action apply to messages\n"
7716"               From: domains with DMARC p=quarantine as well as p=reject"
7717msgstr ""
7718
7719#: Mailman/Gui/Privacy.py:321
7720msgid ""
7721"<ul><li><b>No</b> -- this applies dmarc_moderation_action to\n"
7722"               only those posts From: a domain with DMARC p=reject.  This "
7723"is\n"
7724"               appropriate if you are concerned about bounced messages, but\n"
7725"               want to apply dmarc_moderation_action to as few messages as\n"
7726"               possible.\n"
7727"               <p><li><b>Yes</b> -- this applies dmarc_moderation_action to\n"
7728"               posts From: a domain with DMARC p=reject or p=quarantine.\n"
7729"               </ul><p>If a message is From: a domain with DMARC "
7730"p=quarantine\n"
7731"               and dmarc_moderation_action is not applied (this set to No)\n"
7732"               the message will likely not bounce, but will be delivered to\n"
7733"               recipients' spam folders or other hard to find places."
7734msgstr ""
7735
7736#: Mailman/Gui/Privacy.py:335
7737msgid ""
7738"Shall the above dmarc_moderation_action apply to messages\n"
7739"               From: domains with DMARC p=none as well as p=quarantine and\n"
7740"               p=reject"
7741msgstr ""
7742
7743#: Mailman/Gui/Privacy.py:339
7744msgid ""
7745"<ul><li><b>No</b> -- this applies dmarc_moderation_action to\n"
7746"               only those posts From: a domain with DMARC p=reject and\n"
7747"               possibly p=quarantine depending on the setting of\n"
7748"               dmarc_quarantine_moderation_action.\n"
7749"               <p><li><b>Yes</b> -- this applies dmarc_moderation_action to\n"
7750"               posts From: a domain with DMARC p=none if\n"
7751"               dmarc_moderation_action is Munge From or Wrap Message and\n"
7752"               dmarc_quarantine_moderation_action is Yes.\n"
7753"               <p>The intent of this setting is to eliminate failure "
7754"reports\n"
7755"               to the owner of a domain that publishes DMARC p=none by "
7756"applying\n"
7757"               the message transformations that would be applied if the\n"
7758"               domain's DMARC policy were stronger."
7759msgstr ""
7760
7761#: Mailman/Gui/Privacy.py:353
7762#, fuzzy
7763msgid ""
7764"Text to include in any\n"
7765"             <a href=\"?VARHELP=privacy/sender/dmarc_moderation_action\"\n"
7766"             >rejection notice</a> to\n"
7767"             be sent to anyone who posts to this list from a domain\n"
7768"             with a DMARC Reject%(quarantine)s Policy."
7769msgstr ""
7770"������� ��� �� ����������������� �� ����\n"
7771"             <a href=\"?VARHELP/privacy/sender/member_moderation_action\"\n"
7772"             >���������� ��������� </a> ���\n"
7773"             ��������� ��� ���������� ��� ���������� ���� �� ����� �������� "
7774"�������� �' ���� ��� �����."
7775
7776#: Mailman/Gui/Privacy.py:360
7777#, fuzzy
7778msgid ""
7779"List of addresses (or regexps) whose posts should always apply\n"
7780"             <a href=\"?VARHELP=privacy/sender/dmarc_moderation_action\"\n"
7781"             >dmarc_moderation_action</a> \n"
7782"             regardless of any domain specific DMARC Policy."
7783msgstr ""
7784"������� ��� �� ����������������� �� ����\n"
7785"             <a href=\"?VARHELP/privacy/sender/member_moderation_action\"\n"
7786"             >���������� ��������� </a> ���\n"
7787"             ��������� ��� ���������� ��� ���������� ���� �� ����� �������� "
7788"�������� �' ���� ��� �����."
7789
7790#: Mailman/Gui/Privacy.py:365
7791#, fuzzy
7792msgid ""
7793"Postings from any of these addresses will automatically\n"
7794"             apply any DMARC action mitigation.  This can be utilized to\n"
7795"             automatically wrap or munge postings from known addresses or\n"
7796"             domains that might have policies rejecting external mail From:\n"
7797"             themselves.\n"
7798"\n"
7799"             <p>Add member addresses one per line; start the line with a ^\n"
7800"             character to designate a regular expression match."
7801msgstr ""
7802"��������� ��� ����� ��� ����������� ����� ��� ����� �� ������������� "
7803"��������\n"
7804"             ����� ���������� ���� ���������. ���� �� ������ ��  "
7805"������������ �����\n"
7806"             �������� ����������� � ����������. � ���������� ��� �� "
7807"�������� \n"
7808"             ���������� � ������������� ������, ���� � ����������� ��� "
7809"������ ������\n"
7810"             ����������� <a href=\"?VARHELP=privacy/sender/"
7811"forward_auto_discards\">�� ������� ��������� ��� �� \"�������� ������������� "
7812"����� ���������\" ��������.</a>.\n"
7813"\n"
7814"\t\t\t  <p>��������� ��� ����������� ��� �� ���� ������.\n"
7815"             ������� ��� ������ �� ��� ��������� ^ ��� �� �������� ��������� "
7816"�� ���� ���\n"
7817"             �������� �������."
7818
7819#: Mailman/Gui/Privacy.py:375
7820msgid ""
7821"If dmarc_moderation_action applies and is Wrap Message,\n"
7822"             and this text is provided, the text will be placed in a\n"
7823"             separate text/plain MIME part preceding the original message\n"
7824"             part in the wrapped message."
7825msgstr ""
7826
7827#: Mailman/Gui/Privacy.py:380
7828msgid ""
7829"A wrapped message will either be a multipart/mixed message\n"
7830"             with up to four sub-parts; a text/plain part containing\n"
7831"             msg_header, a text/plain part containing \n"
7832"             dmarc_wrapped_message_text, a message/rfc822 part containing "
7833"the\n"
7834"             original message and a text/plain part containing msg_footer, "
7835"or\n"
7836"             a message/rfc822 message containing only the original message "
7837"if\n"
7838"             none of the other parts are applicable."
7839msgstr ""
7840
7841#: Mailman/Gui/Privacy.py:389
7842msgid ""
7843"A 'two dimensional' list of email address domains which are\n"
7844"               considered equivalent when checking if a post is from a list\n"
7845"               member."
7846msgstr ""
7847
7848#: Mailman/Gui/Privacy.py:393
7849msgid ""
7850"If two poster addresses with the same local part but\n"
7851"               different domains are to be considered equivalents for list\n"
7852"               membership tests, the domains are put here.  The format is\n"
7853"               one or more groups of equivalent domains.  Within a group,\n"
7854"               the domains are separated by commas and multiple groups are\n"
7855"               separated by semicolons. White space is ignored.\n"
7856"               <p>For example:<pre>\n"
7857"               example.com,mail.example.com;mac.com,me.com,icloud.com\n"
7858"               </pre>\n"
7859"               <p>In this example, if user@example.com is a list member,\n"
7860"               a post from user@mail.example.com will be treated as if it "
7861"is\n"
7862"               from user@example.com for list membership/moderation "
7863"purposes,\n"
7864"               and likewise, if user@me.com is a list member, posts from\n"
7865"               user@mac.com or user@icloud.com will be treated as if from\n"
7866"               user@me.com.\n"
7867"               <p>Note that the poster's address is first tested for list\n"
7868"               membership, and the equivalent domain addresses are only "
7869"tested\n"
7870"               if the poster's address is not that of a member.\n"
7871"               <p>Also note that moderation of the equivalent domain "
7872"address\n"
7873"               will apply to the post, but other options such as 'ack' or\n"
7874"               'not&nbsp;metoo' will not."
7875msgstr ""
7876
7877#: Mailman/Gui/Privacy.py:415
7878msgid "Non-member filters"
7879msgstr "������ ��� ��� �������� ����� (����� �����)"
7880
7881#: Mailman/Gui/Privacy.py:418
7882msgid ""
7883"List of non-member addresses whose postings should be\n"
7884"             automatically accepted."
7885msgstr ""
7886"����� ����������� ����� ��� �� ����, ��� ������ �� ��������� ������\n"
7887"             �� �������� �������� ���������."
7888
7889#: Mailman/Gui/Privacy.py:425
7890msgid ""
7891"Postings from any of these non-members will be automatically\n"
7892"             accepted with no further moderation applied.  Add member\n"
7893"             addresses one per line; start the line with a ^ character to\n"
7894"             designate a regular expression match.  A line consisting of\n"
7895"             the @ character followed by a list name specifies another\n"
7896"             Mailman list in this installation, all of whose member\n"
7897"             addresses will be accepted for this list."
7898msgstr ""
7899"��������� ��� ����� ��� ����������� ����� ����� ��� ������ �� ��������\n"
7900"             �������� ��������� ����� �� ����������� �������� ���������� \n"
7901"             �����������. ���������  ��� �����������\n"
7902"             ��� �� ���� ������. ������� ��� ������ �� ��� ��������� ^ ��� \n"
7903"             �� �������� ��������� �� ���� ��� �������� ������� (regexp).\n"
7904"             ��� ����� ��� ����������� ��� ��  \n"
7905"             ��������� @ ������������� ��� ��� ����� ������ ������ ��� "
7906"���� \n"
7907"             ����� Mailman �� ���� ��� �����������, ��� �� ���� ��� ������ \n"
7908"             �� �������� ����� ��� ���� �� �����."
7909
7910#: Mailman/Gui/Privacy.py:434
7911msgid ""
7912"List of non-member addresses whose postings will be\n"
7913"             immediately held for moderation."
7914msgstr ""
7915"����� ����������� ����� ��� �� ����  ��� ������ �� ��������� �� \n"
7916"             ���������� ����� ��� ����������."
7917
7918#: Mailman/Gui/Privacy.py:437
7919msgid ""
7920"Postings from any of these non-members will be immediately\n"
7921"             and automatically held for moderation by the list moderators.\n"
7922"             The sender will receive a notification message which will "
7923"allow\n"
7924"             them to cancel their held message.  Add member addresses one "
7925"per\n"
7926"             line; start the line with a ^ character to designate a regular\n"
7927"             expression match."
7928msgstr ""
7929"�� ��������� ��� ����� ��� ����������� ����� ��� ����� �� ���������� ����� \n"
7930"             ��� �������� ��� ���������� ��� ���� ����������� ��� ������.\n"
7931"             � ���������� �� ������� ��� ��������������� ������ ��� �� ��� "
7932"��������� \n"
7933"             �� ���������� �� ������ ��� ��������� �� �������.  ��������� "
7934"��� ����������� ��� �� ���� ������.\n"
7935"             ������� ��� ������ �� ��� ��������� ^ ��� �� �������� ��������� "
7936"�� ���� ���\n"
7937"             �������� �������."
7938
7939#: Mailman/Gui/Privacy.py:445
7940msgid ""
7941"List of non-member addresses whose postings will be\n"
7942"             automatically rejected."
7943msgstr ""
7944"����� ����� ��� ����� ��� ������ �� ��������� �� \n"
7945"             ������������� ��������."
7946
7947#: Mailman/Gui/Privacy.py:448
7948msgid ""
7949"Postings from any of these non-members will be automatically\n"
7950"             rejected.  In other words, their messages will be bounced back "
7951"to\n"
7952"             the sender with a notification of automatic rejection.  This\n"
7953"             option is not appropriate for known spam senders; their "
7954"messages\n"
7955"             should be\n"
7956"             <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\"\n"
7957"             >automatically discarded</a>.\n"
7958"\n"
7959"             <p>Add member addresses one per line; start the line with a ^\n"
7960"             character to designate a regular expression match."
7961msgstr ""
7962"��������� ��� �����  ��� ����������� ����� ��� ����� �� ������������� \n"
7963"             ��������. �� ���� �����, �� �������� ���� �� ����������� ���� \n"
7964"             ���� ��������� �� ��� ���������� ��� ��� �������� ��������. "
7965"����\n"
7966"             � ������� ��� ����� ��������� ��� �������� ���������� ��������� "
7967"spam. �� �������� �����\n"
7968"             �� ������ \n"
7969"             <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\">�� "
7970"������������� �������� ����� ����������</a>.\n"
7971"\n"
7972"\t\t\t  <p>��������� ��� ����������� ��� �� ���� ������.\n"
7973"             ������� ��� ������ �� ��� ��������� ^ ��� �� �������� ��������� "
7974"�� ���� ���\n"
7975"             �������� �������."
7976
7977#: Mailman/Gui/Privacy.py:460
7978msgid ""
7979"List of non-member addresses whose postings will be\n"
7980"             automatically discarded."
7981msgstr ""
7982"����� ����� ��� ����� ��� ������ �� ��������� �� \n"
7983"             ������������� �������� ����� �������� �����������."
7984
7985#: Mailman/Gui/Privacy.py:463
7986msgid ""
7987"Postings from any of these non-members will be automatically\n"
7988"             discarded.  That is, the message will be thrown away with no\n"
7989"             further processing or notification.  The sender will not "
7990"receive\n"
7991"             a notification or a bounce, however the list moderators can\n"
7992"             optionally <a href=\"?VARHELP=privacy/sender/"
7993"forward_auto_discards\"\n"
7994"             >receive copies of auto-discarded messages.</a>.\n"
7995"\n"
7996"             <p>Add member addresses one per line; start the line with a ^\n"
7997"             character to designate a regular expression match."
7998msgstr ""
7999"��������� ��� ����� ��� ����������� ����� ��� ����� �� ������������� "
8000"��������\n"
8001"             ����� ���������� ���� ���������. ���� �� ������ ��  "
8002"������������ �����\n"
8003"             �������� ����������� � ����������. � ���������� ��� �� "
8004"�������� \n"
8005"             ���������� � ������������� ������, ���� � ����������� ��� "
8006"������ ������\n"
8007"             ����������� <a href=\"?VARHELP=privacy/sender/"
8008"forward_auto_discards\">�� ������� ��������� ��� �� \"�������� ������������� "
8009"����� ���������\" ��������.</a>.\n"
8010"\n"
8011"\t\t\t  <p>��������� ��� ����������� ��� �� ���� ������.\n"
8012"             ������� ��� ������ �� ��� ��������� ^ ��� �� �������� ��������� "
8013"�� ���� ���\n"
8014"             �������� �������."
8015
8016#: Mailman/Gui/Privacy.py:475
8017msgid ""
8018"Action to take for postings from non-members for which no\n"
8019"             explicit action is defined."
8020msgstr ""
8021"�������� ��� �� ������� ��� �������� ����� ��� ����� ��� ������ ��� �� \n"
8022"����� ��� �������� ���� ��������."
8023
8024#: Mailman/Gui/Privacy.py:478
8025msgid ""
8026"When a post from a non-member is received, the message's\n"
8027"             sender is matched against the list of explicitly\n"
8028"             <a href=\"?VARHELP=privacy/sender/accept_these_nonmembers\"\n"
8029"             >accepted</a>,\n"
8030"             <a href=\"?VARHELP=privacy/sender/hold_these_nonmembers\">held</"
8031"a>,\n"
8032"             <a href=\"?VARHELP=privacy/sender/reject_these_nonmembers\"\n"
8033"             >rejected</a> (bounced), and\n"
8034"             <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers\"\n"
8035"             >discarded</a> addresses.  If no match is found, then this "
8036"action\n"
8037"             is taken."
8038msgstr ""
8039"���� ��� �������� ����� ��� �� ���� ������, � ���������� ��� \n"
8040"             ��������� ��������� �� �� ����� ��� ���� ���������� ��\n"
8041"             <a href=\"?VARHELP=privacy/sender/accept_these_nonmembers"
8042"\">���������</a>,\n"
8043"             <a href=\"?VARHELP=privacy/sender/hold_these_nonmembers"
8044"\">����������</a>,\n"
8045"             <a href=\"?VARHELP=privacy/sender/reject_these_nonmembers"
8046"\">����������� �� ���������</a>, ���\n"
8047"             <a href=\"?VARHELP=privacy/sender/discard_these_nonmembers"
8048"\">����������� ����� ���������</a> �����������.  �� ��� ���������, ���� "
8049"������� \n"
8050"             � �������� ����."
8051
8052#: Mailman/Gui/Privacy.py:490
8053msgid ""
8054"Should messages from non-members, which are automatically\n"
8055"             discarded, be forwarded to the list moderator?"
8056msgstr ""
8057"�� ������ �� �������� ����� ��� ����� ��� ��������,\n"
8058"             ������������� ����� ���������, �� ����������� ���� ���������� "
8059"��� ������;"
8060
8061#: Mailman/Gui/Privacy.py:494
8062msgid ""
8063"Text to include in any rejection notice to be sent to\n"
8064"             non-members who post to this list. This notice can include\n"
8065"             the list's owner address by %%(listowner)s and replaces the\n"
8066"             internally crafted default message."
8067msgstr ""
8068"������� ��� �� ����������������� �� ����������� ���������� ��������� ��� "
8069"���������\n"
8070"             ��� �� ���� ��� �������� �������� �� ����� ��� �����. ���� � "
8071"���������� ������ �� ��������\n"
8072"             ��� ��������� ��� ��������� ��� ������ ��� �� ����������� ��\n"
8073"             ��������� ������������� ������ �����������."
8074
8075#: Mailman/Gui/Privacy.py:502
8076msgid ""
8077"This section allows you to configure various filters based on\n"
8078"            the recipient of the message."
8079msgstr ""
8080"���� �� ����� ��� ��������� �� ������������ ������� ������ ���������\n"
8081"            ���� ��������� ��� ���������."
8082
8083#: Mailman/Gui/Privacy.py:505
8084msgid "Recipient filters"
8085msgstr "������ ���������"
8086
8087#: Mailman/Gui/Privacy.py:509
8088msgid ""
8089"Must posts have list named in destination (to, cc) field\n"
8090"             (or be among the acceptable alias names, specified below)?"
8091msgstr ""
8092"�� ������ �� ��������� �� ����� �� ����� ��� ������ ��� ����� ���������� "
8093"(����, �����������) \n"
8094"             (� ������ �� ����� ������ ��� ��������� ������������ ��������,\n"
8095"��� ��������� ��� ����);"
8096
8097#: Mailman/Gui/Privacy.py:512
8098msgid ""
8099"Many (in fact, most) spams do not explicitly name their\n"
8100"             myriad destinations in the explicit destination addresses - in\n"
8101"             fact often the To: field has a totally bogus address for\n"
8102"             obfuscation.  The constraint applies only to the stuff in the\n"
8103"             address before the '@' sign, but still catches all such spams.\n"
8104"\n"
8105"             <p>The cost is that the list will not accept unhindered any\n"
8106"             postings relayed from other addresses, unless\n"
8107"\n"
8108"             <ol>\n"
8109"                 <li>The relaying address has the same name, or\n"
8110"\n"
8111"                 <li>The relaying address name is included on the options "
8112"that\n"
8113"                 specifies acceptable aliases for the list.\n"
8114"\n"
8115"             </ol>"
8116msgstr ""
8117"����� (���� ��������������, �� �����������) �������� spam ��� ��������� "
8118"����\n"
8119"             �������� ����������� ���� �� ���� ��������� ���������� - ��� "
8120"�����������\n"
8121"             ����� �� ����� ����: ���� ������ ���������� ��������� ���\n"
8122"             �������. � ����������� ����������� ���� ��� ����� ���\n"
8123"             ���������� ���� ��  ������� '@', ���� ������ ��� ���� �� "
8124"��������.\n"
8125"\n"
8126"             <p>�� ������ ����� ��� � ����� ��� �� ������� ����������� ����\n"
8127"             �������� �� ������������� ��� ����� �����������, �����:\n"
8128"\n"
8129"             <ol>\n"
8130"                 <li>��� � ��������� ��� ��� ������������� ���� �� ���� "
8131"�����, �\n"
8132"\n"
8133"                 <li>�� ����� ��� ���������� ��� ��� ������������� "
8134"�������������� ���� �������� ��\n"
8135"                 ������ ������� �������� ����������� ������� ��� ��� �����.\n"
8136"\n"
8137"             </ol>"
8138
8139#: Mailman/Gui/Privacy.py:530
8140msgid ""
8141"Alias names (regexps) which qualify as explicit to or cc\n"
8142"             destination names for this list."
8143msgstr ""
8144"����������� ������� (regexps) �� ����� ����� ��������� ��� ���� ������� "
8145"����������\n"
8146"              ��� ����� ���� � ����������� ��� ���� �� �����."
8147
8148#: Mailman/Gui/Privacy.py:533
8149msgid ""
8150"Alternate addresses that are acceptable when\n"
8151"             `require_explicit_destination' is enabled.  This option takes "
8152"a\n"
8153"             list of regular expressions, one per line, which is matched\n"
8154"             against every recipient address in the message.  The matching "
8155"is\n"
8156"             performed with Python's re.match() function, meaning they are\n"
8157"             anchored to the start of the string.\n"
8158"             \n"
8159"             <p>For backwards compatibility with Mailman 1.1, if the regexp\n"
8160"             does not contain an `@', then the pattern is matched against "
8161"just\n"
8162"             the local part of the recipient address.  If that match fails, "
8163"or\n"
8164"             if the pattern does contain an `@', then the pattern is "
8165"matched\n"
8166"             against the entire recipient address.\n"
8167"             \n"
8168"             <p>Matching against the local part is deprecated; in a future\n"
8169"             release, the pattern will always be matched against the entire\n"
8170"             recipient address."
8171msgstr ""
8172"������������ ����������� �� ������ ����� ��������� ����  ���� ������������� "
8173"� �������\n"
8174"             `���������� ����� ����������'. ���� � ������� ������� ��� \n"
8175"             ����� ��� ��������� ���������, ��� �� ���� ������, � ����� "
8176"���������\n"
8177"             �� ���� ��������� ��������� ��� ������. � ������� ��� "
8178"���������� \n"
8179"             ���������������� �� ��� ��������� ���  Python re.match(), ��� "
8180"�������� ��� \n"
8181"             ��������� ���� ���� ��� �������������.\n"
8182"             \n"
8183"             <p>��� ����������� ���� �� �������� �� �� Mailman 1.1, �� � "
8184"������� (regexp)\n"
8185"             ��� �������� ��� `@', ���� �� ������� ����������� ���� ���� ��\n"
8186"             ������ ����� ��� ���������� ��� ���������. �� � ������� ��� "
8187"���������� ��������, �\n"
8188"             �� ������� �������� ��� `@', ���� �� ������� �����������\n"
8189"             �� �������� ��� ��������� ��� ���������.\n"
8190"             \n"
8191"             <p>� ������� ��� ���������� ���� �� ������ ����� ��� ���������� "
8192"���� ���� ������������� ��� �� ���������\n"
8193"             ������, �� ������� �� ����������� ����� ���� ��������\n"
8194"             ��� ��������� ��� ���������."
8195
8196#: Mailman/Gui/Privacy.py:551
8197msgid "Ceiling on acceptable number of recipients for a posting."
8198msgstr "���� ���� �������� ������ ���������� �� ��� �������� ���� �� �����."
8199
8200#: Mailman/Gui/Privacy.py:553
8201msgid ""
8202"If a posting has this number, or more, of recipients, it is\n"
8203"             held for admin approval.  Use 0 for no ceiling."
8204msgstr ""
8205"�� �� ������������� ������ ���� ���� ��� ������ � �������������  ����������, "
8206"����\n"
8207"             ��������� ��� ������� ��� ��� �����������. ��������������� 0 "
8208"��� \n"
8209"�� ��� ������� ����."
8210
8211#: Mailman/Gui/Privacy.py:558
8212msgid ""
8213"This section allows you to configure various anti-spam\n"
8214"            filters posting filters, which can help reduce the amount of "
8215"spam\n"
8216"            your list members end up receiving.\n"
8217"            "
8218msgstr ""
8219"���� �� ����� ��������� �� ������������ ������� anti-spam\n"
8220"������, �� ����� ������� �� ���������� �� ���� ��� spam\n"
8221"            ��� �� ���� ��� ������ ���������.\n"
8222"            "
8223
8224#: Mailman/Gui/Privacy.py:563
8225msgid "Header filters"
8226msgstr "������ ������������"
8227
8228#: Mailman/Gui/Privacy.py:566
8229msgid "Filter rules to match against the headers of a message."
8230msgstr "������� ������� ��� ������������ ���� ����������� ��� ���������"
8231
8232#: Mailman/Gui/Privacy.py:568
8233#, fuzzy
8234msgid ""
8235"Each header filter rule has two parts, a list of regular\n"
8236"             expressions, one per line, and an action to take.  Mailman\n"
8237"             matches the message's headers against every regular expression "
8238"in\n"
8239"             the rule and if any match, the message is rejected, held, or\n"
8240"             discarded based on the action you specify.  Use <em>Defer</em> "
8241"to\n"
8242"             temporarily disable a rule.\n"
8243"\n"
8244"             You can have more than one filter rule for your list.  In that\n"
8245"             case, each rule is matched in turn, with processing stopped "
8246"after\n"
8247"             the first match.\n"
8248"\n"
8249"             Note that headers are collected from all the attachments\n"
8250"             (except for the mailman administrivia message) and\n"
8251"             matched against the regular expressions. With this feature,\n"
8252"             you can effectively sort out messages with dangerous file\n"
8253"             types or file name extensions."
8254msgstr ""
8255"���� �������  �������������� ������������ ���� ��� �������, ��� ����� ��� "
8256"��������� ��������� \n"
8257"             ��� �� ���� ������ , ��� ��� �������� ��� �� �������. � "
8258"Mailman\n"
8259"             ��������� ��� ������������ ��� ��������� �� ���� �������� "
8260"������� ���� \n"
8261"             ������ ��� �� ������ ���������, �� ������ ������������, "
8262"���������, �\n"
8263"             ������������ ����� ��������� ��� ��������� �� ���� ��� �������� "
8264"��� �������.\n"
8265"             ��������������� <em>����� ��������</em> ��� �� ��������������� "
8266"��������� ��� ������.\n"
8267"\n"
8268"             �������� �� ����� ������������� ��� ��� ������ ��� ��� ����� "
8269"���.  �' ����\n"
8270"             ��� ���������, ���� ������� ��������� ��������, �� ��� "
8271"����������� �� ��������� ���� \n"
8272"             ��� ����� ���������."
8273
8274#: Mailman/Gui/Privacy.py:585
8275msgid "Legacy anti-spam filters"
8276msgstr "������ anti-spam"
8277
8278#: Mailman/Gui/Privacy.py:588
8279msgid "Hold posts with header value matching a specified regexp."
8280msgstr ""
8281"���������� ��� ��������� ��������� �� ������������ �� ������ \n"
8282"���������� ���� ������������ �������:"
8283
8284#: Mailman/Gui/Privacy.py:589
8285msgid ""
8286"Use this option to prohibit posts according to specific\n"
8287"             header values.  The target value is a regular-expression for\n"
8288"             matching against the specified header.  The match is done\n"
8289"             disregarding letter case.  Lines beginning with '#' are "
8290"ignored\n"
8291"             as comments.\n"
8292"\n"
8293"             <p>For example:<pre>to: .*@public.com </pre> says to hold all\n"
8294"             postings with a <em>To:</em> mail header containing '@public."
8295"com'\n"
8296"             anywhere among the addresses.\n"
8297"\n"
8298"             <p>Note that leading whitespace is trimmed from the regexp.  "
8299"This\n"
8300"             can be circumvented in a number of ways, e.g. by escaping or\n"
8301"             bracketing it."
8302msgstr ""
8303"��������������� ���� ��� ������� ��� �� ������������ ��������� ������� �� "
8304"������������� \n"
8305"             ����� ���� ������������.  � ���� ���������� ����� ��� �������� "
8306"������� ���\n"
8307"             �������� �� ��� ������������ �����������. � ������� ��� "
8308"���������� �������\n"
8309"             ���������� ��� �����/�������� ��������. �� ������� ��� �������� "
8310"�� '#' ����������\n"
8311"             �� ������.\n"
8312"\n"
8313"             <p>��� ����������:<pre>����: .*@public.com </pre> ������� �� "
8314"��������� ����\n"
8315"             �� ��������� �� ��� �����������  <em>����:</em> �� �������� "
8316"'@public.com'\n"
8317"             ���������� ��� ���������.\n"
8318"\n"
8319"             <p>��������� ��� �� ������ ���� ������������ ��� ��� �������� "
8320"�������.  ����\n"
8321"             ������ �� ��������� �� ��������� �������, �.�. �� ��� ��������� "
8322"�������� � �������."
8323
8324#: Mailman/Gui/Privacy.py:624
8325msgid ""
8326"dmarc_moderation_action must be >= the configured\n"
8327"                           default value."
8328msgstr ""
8329
8330#: Mailman/Gui/Privacy.py:674
8331msgid ""
8332"Header filter rules require a pattern.\n"
8333"                Incomplete filter rules will be ignored."
8334msgstr ""
8335"�� ������� ��� ������ ������������ �������� ��� �������.\n"
8336"                ��������� ������� ������� �� ����������."
8337
8338#: Mailman/Gui/Privacy.py:693
8339msgid ""
8340"The header filter rule pattern\n"
8341"                '%(safepattern)s' is not a legal regular expression.  This\n"
8342"                rule will be ignored."
8343msgstr ""
8344"�� ������� ���� ������ ��� ������� ������������\n"
8345"                '%(safepattern)s' ��� ����� ��� ���� �������� �������. "
8346"�����\n"
8347"                � ������� �� ��������."
8348
8349#: Mailman/Gui/Topics.py:38
8350msgid "Topics"
8351msgstr "������"
8352
8353#: Mailman/Gui/Topics.py:46
8354msgid "List topic keywords"
8355msgstr "������ ������� ��� �� ���� ��� ������"
8356
8357#: Mailman/Gui/Topics.py:48
8358msgid "Disabled"
8359msgstr "����������������"
8360
8361#: Mailman/Gui/Topics.py:48
8362msgid "Enabled"
8363msgstr "��������������"
8364
8365#: Mailman/Gui/Topics.py:49
8366msgid "Should the topic filter be enabled or disabled?"
8367msgstr ""
8368"������ �� ������ ��� ������� �� ����� �������������� � ����������������;"
8369
8370#: Mailman/Gui/Topics.py:51
8371msgid ""
8372"The topic filter categorizes each incoming email message\n"
8373"             according to <a\n"
8374"            href=\"https://docs.python.org/2/library/re.html\">regular\n"
8375"             expression filters</a> you specify below.  If the message's\n"
8376"             <code>Subject:</code> or <code>Keywords:</code> header contains "
8377"a\n"
8378"             match against a topic filter, the message is logically placed\n"
8379"             into a topic <em>bucket</em>.  Each user can then choose to "
8380"only\n"
8381"             receive messages from the mailing list for a particular topic\n"
8382"             bucket (or buckets).  Any message not categorized in a topic\n"
8383"             bucket registered with the user is not delivered to the list.\n"
8384"\n"
8385"             <p>Note that this feature only works with regular delivery, "
8386"not\n"
8387"             digest delivery.\n"
8388"\n"
8389"             <p>The body of the message can also be optionally scanned for\n"
8390"             <code>Subject:</code> and <code>Keywords:</code> headers, as\n"
8391"             specified by the <a\n"
8392"       href=\"?VARHELP=topics/topics_bodylines_limit"
8393"\">topics_bodylines_limit</a>\n"
8394"             configuration variable."
8395msgstr ""
8396"�� ������ ������� �������������� ���� ����������� ������\n"
8397"             ������� �� �� <a href=\"https://docs.python.org/2/library/re."
8398"html\">������\n"
8399"             ��������� ���������</a> ��� ��������� ��� ����. �� �� "
8400"������������\n"
8401"             <code>����:</code> � <code>������ �������:</code> ��� "
8402"��������� \n"
8403"             ���������� ������� �� �� ������ �������, �� ������ ������ "
8404"������������\n"
8405"             ��� <em>�������</em> ���� �������. ���� ������� ������� ������ "
8406"�� �������� �� �������\n"
8407"             �������� ���� ��� ����� �� ������������ � ������������� "
8408"�������\n"
8409"             �������.  ���� ������ �� ����� ��� ����������������� �� ��� "
8410"������ �������\n"
8411"             ������������ �� ������ ��� ����������� ���� �����.\n"
8412"\n"
8413"             <p>��������� ��� �� �������������� ���� ���������� ���� �� "
8414"�������� �������� ���������,\n"
8415"             ��� ��� �� ������������� ��������.\n"
8416"\n"
8417"             <p>�� ���� ��� ��������� ������ ����������� �� ��������� ��� "
8418"���\n"
8419"             ������������ <code>����:</code> ��� <code>������ �������:</"
8420"code> ����\n"
8421"             �������� �� ��� ��������� ����������� <ahref=\"?VARHELP=topics/"
8422"topics_bodylines_limit\">\n"
8423"topics_bodylines_limit</a>."
8424
8425#: Mailman/Gui/Topics.py:72
8426msgid "How many body lines should the topic matcher scan?"
8427msgstr ""
8428"����� ������� ��� ������� ��� ��������� �� ������ �� ������� � ������� "
8429"�������;"
8430
8431#: Mailman/Gui/Topics.py:74
8432msgid ""
8433"The topic matcher will scan this many lines of the message\n"
8434"             body looking for topic keyword matches.  Body scanning stops "
8435"when\n"
8436"             either this many lines have been looked at, or a non-header-"
8437"like\n"
8438"             body line is encountered.  By setting this value to zero, no "
8439"body\n"
8440"             lines will be scanned (i.e. only the <code>Keywords:</code> "
8441"and\n"
8442"             <code>Subject:</code> headers will be scanned).  By setting "
8443"this\n"
8444"             value to a negative number, then all body lines will be "
8445"scanned\n"
8446"             until a non-header-like line is encountered.\n"
8447"             "
8448msgstr ""
8449" � ������� ������� �� ������� �� ������ ������� ��� ���� ��� ���������\n"
8450"             ����������� ��� ������ �������. � ������� ��� ���� ��� "
8451"���������\n"
8452"             ������� ���� ���� �� ������ ��� ������� ��������, �  ��� ������ "
8453"������ �� ����\n"
8454"              ������������ ��� ���� ��� ���������. ��������� ���� ��� ���� "
8455"�� ����� (0), ��� \n"
8456"             �� ���������� �� ������� ��� ���� ��� ��������� (���� ���� �� "
8457"������������ <code>������ �������:</code> ���\n"
8458"             <code>����:</code> �� ����������). ����������� ���� ��� ����\n"
8459"             �� ���� �������� ������, ���� ���� �� ������� ��� ���� ��� "
8460"��������� �� ����������\n"
8461"             ����� �� ������ ��� ������ ��� ��� ������� �� ����������� "
8462"���������.\n"
8463"             "
8464
8465#: Mailman/Gui/Topics.py:85
8466msgid "Topic keywords, one per line, to match against each message."
8467msgstr "������ ������� �������, ��� �� ���� ������, ��� ������ �� ���� ������"
8468
8469#: Mailman/Gui/Topics.py:87
8470msgid ""
8471"Each topic keyword is actually a regular expression, which is\n"
8472"             matched against certain parts of a mail message, specifically "
8473"the\n"
8474"             <code>Keywords:</code> and <code>Subject:</code> message "
8475"headers.\n"
8476"             Note that the first few lines of the body of the message can "
8477"also\n"
8478"             contain a <code>Keywords:</code> and <code>Subject:</code>\n"
8479"             \"header\" on which matching is also performed."
8480msgstr ""
8481"���� ���� ������ ���� ����� ����� ��� �������� �������, � �����\n"
8482"             ��������� ������� �� ������������ ������� ��� ���������, ��� "
8483"������ �� ��� ������������\n"
8484"             <code>������ �������:</code> ��� <code>����:</code> ��� "
8485"���������.\n"
8486"             ��������� ��� ������� ��� ��� ������ ������� ��� ���� ��� "
8487"��������� ������� ������ ��\n"
8488"             ��������� ���  \"�����������\" ���� <code>������ �������:</"
8489"code> ��� <code>����:</code>\n"
8490"             ���� ����� ������ �� ���������������� �������."
8491
8492#: Mailman/Gui/Topics.py:125
8493msgid ""
8494"Topic specifications require both a name and\n"
8495"                a pattern.  Incomplete topics will be ignored."
8496msgstr ""
8497"�� ������� ������� �������� ��� ����� ��� ��� �������.\n"
8498"               ������ ������ �� ���������."
8499
8500#: Mailman/Gui/Topics.py:135
8501msgid ""
8502"The topic pattern '%(safepattern)s' is not a\n"
8503"                legal regular expression.  It will be discarded."
8504msgstr ""
8505"�� ������� ��� ������� '%(safepattern)s' ��� ����� ��� \n"
8506"                ���� �������� �������. � ������� �� ����������."
8507
8508#: Mailman/Gui/Usenet.py:25
8509msgid "Mail&lt;-&gt;News&nbsp;gateways"
8510msgstr "����� �������������&lt;-&gt;����&nbsp;"
8511
8512#: Mailman/Gui/Usenet.py:35
8513msgid "Mail-to-News and News-to-Mail gateway services."
8514msgstr "��������� ����� ������������� �� ��� ��� ���� �� ������������"
8515
8516#: Mailman/Gui/Usenet.py:37
8517msgid "News server settings"
8518msgstr "��������� ���������� ����"
8519
8520#: Mailman/Gui/Usenet.py:40
8521msgid "The hostname of the machine your news server is running on."
8522msgstr "To ����� ��� ����������� ��� ����� ������ � ����������� ����."
8523
8524#: Mailman/Gui/Usenet.py:41
8525msgid ""
8526"This value may be either the name of your news server, or\n"
8527"             optionally of the format name:port, where port is a port "
8528"number.\n"
8529"\n"
8530"             The news server is not part of Mailman proper.  You have to\n"
8531"             already have access to an NNTP server, and that NNTP server "
8532"must\n"
8533"             recognize the machine this mailing list runs on as a machine\n"
8534"             capable of reading and posting news."
8535msgstr ""
8536"���� � ���� ������ �� ����� ���� �� ����� ��� ��� ���������� ���� �\n"
8537"             ����������� ��� ������ �����:port, ���� �� port ����� ���� "
8538"������� ������.\n"
8539"\n"
8540"             � ����������� ���� ��� ����� ����� ��� Mailman. �� ������ ��\n"
8541"             ����� ��� �������� �� ���� ���������� NNTP, ��� ����� �\n"
8542"             ����������� NNTP ������ �� ����������� ��� ������ ��� "
8543"����������\n"
8544"             ���� ��� ����� ������������� ��� ��� ������ ��������� �� "
8545"�������� ��� �� ���������� ���."
8546
8547#: Mailman/Gui/Usenet.py:50
8548msgid "The name of the Usenet group to gateway to and/or from."
8549msgstr "�� ����� ��� ������ Usenet ���� ���� ���/� ���."
8550
8551#: Mailman/Gui/Usenet.py:53
8552msgid ""
8553"Should new posts to the mailing list be sent to the\n"
8554"             newsgroup?"
8555msgstr ""
8556"�� ������ �� ���� �����o��� ���� ����� �� ���������� ��� \n"
8557"             ���� ����� ����;"
8558
8559#: Mailman/Gui/Usenet.py:57
8560msgid ""
8561"Should new posts to the newsgroup be sent to the mailing\n"
8562"             list?"
8563msgstr ""
8564"�� ������ �� ���� ��������� ���� ����� ���� �� ���������� ���� \n"
8565"             ����� ������������ ������������;"
8566
8567#: Mailman/Gui/Usenet.py:60
8568msgid "Forwarding options"
8569msgstr "�������� ���������"
8570
8571#: Mailman/Gui/Usenet.py:63
8572msgid "Moderated"
8573msgstr "�� ����������"
8574
8575#: Mailman/Gui/Usenet.py:63
8576msgid "Open list, moderated group"
8577msgstr "������� ������, ������ �� ����������"
8578
8579#: Mailman/Gui/Usenet.py:66
8580msgid "The moderation policy of the newsgroup."
8581msgstr "� �������� ����������� ��� ������ ����"
8582
8583#: Mailman/Gui/Usenet.py:68
8584msgid ""
8585"This setting determines the moderation policy of the\n"
8586"             newsgroup and its interaction with the moderation policy of "
8587"the\n"
8588"             mailing list.  This only applies to the newsgroup that you are\n"
8589"             gatewaying <em>to</em>, so if you are only gatewaying from\n"
8590"             Usenet, or the newsgroup you are gatewaying to is not "
8591"moderated,\n"
8592"             set this option to <em>None</em>.\n"
8593"\n"
8594"             <p>If the newsgroup is moderated, you can set this mailing "
8595"list\n"
8596"             up to be the moderation address for the newsgroup.  By "
8597"selecting\n"
8598"             <em>Moderated</em>, an additional posting hold will be placed "
8599"in\n"
8600"             the approval process.  All messages posted to the mailing list\n"
8601"             will have to be approved before being sent on to the "
8602"newsgroup,\n"
8603"             or to the mailing list membership.\n"
8604"\n"
8605"             <p><em>Note that if the message has an <tt>Approved</tt> "
8606"header\n"
8607"             with the list's administrative password in it, this hold test\n"
8608"             will be bypassed, allowing privileged posters to send messages\n"
8609"             directly to the list and the newsgroup.</em>\n"
8610"\n"
8611"             <p>Finally, if the newsgroup is moderated, but you want to "
8612"have\n"
8613"             an open posting policy anyway, you should select <em>Open "
8614"list,\n"
8615"             moderated group</em>.  The effect of this is to use the normal\n"
8616"             Mailman moderation facilities, but to add an <tt>Approved</tt>\n"
8617"             header to all messages that are gatewayed to Usenet."
8618msgstr ""
8619"���� � ������� ������������ ��� �������� ����������� ��� \n"
8620"             ������ ���� ��� ��� ������������� ��� �� ��� �������� "
8621"�����������\n"
8622"             ��� ������.  ���� ����������� ���� ���� ������ ���������� ���� "
8623"��� ������ \n"
8624"             ������������ ���� <em>����</em>, ���� ���� �� ������������� "
8625"���� ��� \n"
8626"             ��� Usenet, � � ����� ���� ���� ��� ����� ������������� ���� ,\n"
8627"             ��� ����� ���������� ��� ���������� ������ ���� ��� ������� �� "
8628"<em>�����</em>.\n"
8629"\n"
8630"             <p>�� � ����� ���������� ���� ����������, �������� �� ������� "
8631"���� ��� �����\n"
8632"             �� ����� � ��������� ����������� ��� ��� ����� ����������. "
8633"�����������\n"
8634"             <em>�� ����������</em>, ��� �������� ������ �������� ������� "
8635"��� \n"
8636"             ���������� ��������. ��� �� �������� �� ����� ������������� ��� "
8637"�����\n"
8638"             �� ������ �� ����������� ����  ���������� ���� ����� "
8639"����������,\n"
8640"             � ��� ���� ��� ������.\n"
8641"\n"
8642"             <p><em>��������� ��� �� ��� ������ ���� ��� ����������� "
8643"<tt>�����������</tt> \n"
8644"             �� ��� ������ ��������� ��� ����������� ��� ������ �' �����, "
8645"����� � ������� \n"
8646"             �� �����������, ������������ ����������������� ���������� �� "
8647"�������� ��������\n"
8648"             ���' ������� ��� ����� ��� ���� ����� ����������.</em>\n"
8649"\n"
8650"             <p>�����, �� ��� ����� ���������� ���� ����������, ���� ������ "
8651"�� �����\n"
8652"             ��� ������� �������� ���������, �� ������ �� ��������� "
8653"<em>������� �����,\n"
8654"             ����� �����������</em>. �� ���������� ����� ����� �� "
8655"�������������� ��� ���������\n"
8656"             ����������� ����������� ��� Mailman, ���� ��� �� ����������� "
8657"��� ����������� <tt>�����������</tt>\n"
8658"             �� ��� �� �������� �� ����� ������������� ���� ������ \n"
8659" Usenet."
8660
8661#: Mailman/Gui/Usenet.py:94
8662msgid "Prefix <tt>Subject:</tt> headers on postings gated to news?"
8663msgstr ""
8664"������� ���� ������������ <tt>����:</tt> �� ��������� ��� ����������\n"
8665"���� ������ ����;"
8666
8667#: Mailman/Gui/Usenet.py:95
8668msgid ""
8669"Mailman prefixes <tt>Subject:</tt> headers with\n"
8670"             <a href=\"?VARHELP=general/subject_prefix\">text you can\n"
8671"             customize</a> and normally, this prefix shows up in messages\n"
8672"             gatewayed to Usenet.  You can set this option to <em>No</em> "
8673"to\n"
8674"             disable the prefix on gated messages.  Of course, if you turn "
8675"off\n"
8676"             normal <tt>Subject:</tt> prefixes, they won't be prefixed for\n"
8677"             gated messages either."
8678msgstr ""
8679"��������� ��� Mailman ���� ������������ <tt>����:</tt> ��\n"
8680"             <a href=\"?VARHELP=general/subject_prefix\">������� ��� "
8681"��������\n"
8682"             �� �������������</a> ��� ��������, ���� �� ������� �� "
8683"����������� ��� �������� �� �����\n"
8684"             ���������� ���� ������ Usenet. �������� �� ������� ���� ��� "
8685"������� �� <em>���</em> \n"
8686"             ��� �� ���������������� �� ������� ��� ������������� ��������. "
8687"������, �� ���������������� \n"
8688"             �� �������� ��������� <tt>����:</tt>, ��� �� ������������ ��� \n"
8689"             ������������� �������� ������."
8690
8691#: Mailman/Gui/Usenet.py:103
8692msgid "Mass catch up"
8693msgstr "������� ������� ��� ��������� "
8694
8695#: Mailman/Gui/Usenet.py:106
8696msgid "Should Mailman perform a <em>catchup</em> on the newsgroup?"
8697msgstr ""
8698"�� ������ �� Mailman �� ��������������� ��� <em>��������� </em> �� \n"
8699"��� ����� ����;"
8700
8701#: Mailman/Gui/Usenet.py:107
8702msgid ""
8703"When you tell Mailman to perform a catchup on the newsgroup,\n"
8704"             this means that you want to start gating messages to the "
8705"mailing\n"
8706"             list with the next new message found.  All earlier messages on\n"
8707"             the newsgroup will be ignored.  This is as if you were reading\n"
8708"             the newsgroup yourself, and you marked all current messages as\n"
8709"             <em>read</em>.  By catching up, your mailing list members will\n"
8710"             not see any of the earlier messages."
8711msgstr ""
8712"���� ������ � Mailman �� ��������������� ��� ��������� �� ��� ����� ����,\n"
8713"             ���� �������� ��� ������ �� ����� �� �������� ��� �����\n"
8714"             �� �� ������� ��� ������ ��� �� ������. ��� �� ���������� "
8715"�������� ����\n"
8716"             ����� ���� �� ���������. A��� ����� ��� �� ��������� ��� \n"
8717"             ����� ���� ��� ��� ����� ���, ��� ���������� ��� �� �������� "
8718"�������� ��\n"
8719"             <em>����������</em>. �� ��� ������ ��� ��������� , �� ���� ��� "
8720"������ ��� ��� �� \n"
8721"             ���� ������ ��� �� ���������� ��������."
8722
8723#: Mailman/Gui/Usenet.py:121
8724msgid "Mass catchup completed"
8725msgstr "� ������� ������� ��� ��������� (catchup) ������������ "
8726
8727#: Mailman/Gui/Usenet.py:133
8728msgid ""
8729"You cannot enable gatewaying unless both the\n"
8730"                <a href=\"?VARHELP=gateway/nntp_host\">news server field</a> "
8731"and\n"
8732"                the <a href=\"?VARHELP=gateway/linked_newsgroup\">linked\n"
8733"                newsgroup</a> fields are filled in."
8734msgstr ""
8735"��� �������� �� �������������� ��� ���������� �����  ����� ��� �� "
8736"������������ ��� �� ��� �� �����\n"
8737"                <a href=\"?VARHELP=gateway/nntp_host\">����������� "
8738"����������</a> ��� \n"
8739"                �� <a href=\"?VARHELP=gateway/linked_newsgroup\">���������\n"
8740"                ����� ����������</a> ."
8741
8742#: Mailman/HTMLFormatter.py:49
8743msgid "%(listinfo_link)s list run by %(owner_link)s"
8744msgstr "%(listinfo_link)s � ����� ������ �� %(owner_link)s"
8745
8746#: Mailman/HTMLFormatter.py:57
8747msgid "%(realname)s administrative interface"
8748msgstr "���������� ����������� ��� %(realname)s"
8749
8750#: Mailman/HTMLFormatter.py:58
8751msgid " (requires authorization)"
8752msgstr " (������� �������������)"
8753
8754#: Mailman/HTMLFormatter.py:61
8755msgid "Overview of all %(hostname)s mailing lists"
8756msgstr "������������� ���� ��� ������ ���� %(hostname)s"
8757
8758#: Mailman/HTMLFormatter.py:78
8759msgid "<em>(1 private member not shown)</em>"
8760msgstr "<em>(1 �������� ����� ��� �����������)</em>"
8761
8762#: Mailman/HTMLFormatter.py:80
8763msgid "<em>(%(num_concealed)d private members not shown)</em>"
8764msgstr "<em>(%(num_concealed)d �������� ����� ��� �����������)</em>"
8765
8766#: Mailman/HTMLFormatter.py:140
8767msgid "; it was disabled by you"
8768msgstr "&middot; ���� ���������������� ��� ����"
8769
8770#: Mailman/HTMLFormatter.py:142
8771msgid "; it was disabled by the list administrator"
8772msgstr "&middot; ���� ���������������� ��� ��� ����������� ��� ������"
8773
8774#: Mailman/HTMLFormatter.py:146
8775msgid ""
8776"; it was disabled due to excessive bounces.  The\n"
8777"            last bounce was received on %(date)s"
8778msgstr ""
8779"&middot; ���� ���������������� ���� ������� ������� �������������� ��������� "
8780"(bounces).\n"
8781"            �� ��������� ������������� ������ ����������� ��� %(date)s"
8782
8783#: Mailman/HTMLFormatter.py:149
8784msgid "; it was disabled for unknown reasons"
8785msgstr "&middot; ���� ���������������� ��� ��������� ������"
8786
8787#: Mailman/HTMLFormatter.py:151
8788msgid "Note: your list delivery is currently disabled%(reason)s."
8789msgstr ""
8790"��������: � �������� ��� ����� ����� �� ������ ���� ���������������� "
8791"%(reason)s."
8792
8793#: Mailman/HTMLFormatter.py:154
8794msgid "Mail delivery"
8795msgstr "�������� �������������"
8796
8797#: Mailman/HTMLFormatter.py:156 Mailman/HTMLFormatter.py:301
8798msgid "the list administrator"
8799msgstr "� ������������ ��� ������"
8800
8801#: Mailman/HTMLFormatter.py:157
8802msgid ""
8803"<p>%(note)s\n"
8804"\n"
8805"            <p>You may have disabled list delivery intentionally,\n"
8806"            or it may have been triggered by bounces from your email\n"
8807"            address.  In either case, to re-enable delivery, change the\n"
8808"            %(link)s option below.  Contact %(mailto)s if you have any\n"
8809"            questions or need assistance."
8810msgstr ""
8811"<p>%(note)s\n"
8812"\n"
8813"            <p>������ �� ����� ��������������� ��� �������� ��������� ��� "
8814"������ �������,\n"
8815"            � ������ �� ����� ���������� �� ������������� �������� ��� ��� "
8816"�������� \n"
8817"            email ���. �� ���� ��������� ��� �� �������������� ���� ��� "
8818"�������� ���������, ������� the\n"
8819"            %(link)s ��� ������� ��� ����.  �������������� %(mailto)s �� "
8820"����� ������ \n"
8821"            ������� � ���������� �������."
8822
8823#: Mailman/HTMLFormatter.py:169
8824msgid ""
8825"<p>We have received some recent bounces from your\n"
8826"            address.  Your current <em>bounce score</em> is %(score)s out of "
8827"a\n"
8828"            maximum of %(total)s.  Please double check that your subscribed\n"
8829"            address is correct and that there are no problems with delivery "
8830"to\n"
8831"            this address.  Your bounce score will be automatically reset if\n"
8832"            the problems are corrected soon."
8833msgstr ""
8834"<p>������ ������ ������ �������� ������������� �������� ��� ��� \n"
8835"            ��������� ���. � ������ <em> ������� ����������</em> ����� "
8836"%(score)s ��� ��������� \n"
8837"            �� ������� ���  %(total)s.  �������� ������� ��� � ��������� "
8838"������� ��� \n"
8839"            ����� ����� ��� ��� �������� ���������� �� ��� �������� "
8840"������������� �' ���� \n"
8841"            �� ���������.  � ������� ���������� �� ���������� �������� �� \n"
8842"            �� ���������� ���������� ��� ������."
8843
8844#: Mailman/HTMLFormatter.py:181
8845msgid ""
8846"(Note - you are subscribing to a list of mailing lists, so the %(type)s "
8847"notice will be sent to the admin address for your membership, %(addr)s.)<p>"
8848msgstr ""
8849"(�������� - ���������� �� ��� ����� ��� ������ �� ������������, ���� �� "
8850"%(type)s ������������ �� ���������� ��� ��������� ����������� ��� ���  "
8851"������� ��� %(addr)s.)<p>"
8852
8853#: Mailman/HTMLFormatter.py:191
8854msgid ""
8855"You will be sent email requesting confirmation, to\n"
8856"            prevent others from gratuitously subscribing you."
8857msgstr ""
8858"�� ��� ��������� email �������� �����������, �� �����\n"
8859"            �� ������������ �� ����� �� ��� ��������� ��� ����� \n"
8860"�������������."
8861
8862#: Mailman/HTMLFormatter.py:194
8863msgid ""
8864"This is a closed list, which means your subscription\n"
8865"            will be held for approval.  You will be notified of the list\n"
8866"            moderator's decision by email."
8867msgstr ""
8868"���� ����� ��� ������� �����, ���� �������� ��� � ������� ��� \n"
8869"            �� ������ �� ������� ��� ������� . �� ������������� ��� ��� \n"
8870"            ���������� ��� ������ ��� ��� ������� ��� �� email."
8871
8872#: Mailman/HTMLFormatter.py:197 Mailman/HTMLFormatter.py:204
8873msgid "also "
8874msgstr "������"
8875
8876#: Mailman/HTMLFormatter.py:199
8877msgid ""
8878"You will be sent email requesting confirmation, to\n"
8879"            prevent others from gratuitously subscribing you.  Once\n"
8880"            confirmation is received, your request will be held for "
8881"approval\n"
8882"            by the list moderator.  You will be notified of the moderator's\n"
8883"            decision by email."
8884msgstr ""
8885"�� ��� ���������� email �������� �����������, �� �����\n"
8886"            �� ������������ �� ����� �� ��� ��������� ��� ����� "
8887"�������������.  �����\n"
8888"            ������ � ����������� ���,  � ������ �� ������ �� ������� ��� "
8889"�������\n"
8890"            ��� ��� ���������� ��� ������. �� �������������  ��� ��� ������� "
8891"���\n"
8892"            ���������� �� email."
8893
8894#: Mailman/HTMLFormatter.py:208
8895msgid ""
8896"This is %(also)sa private list, which means that the\n"
8897"            list of members is not available to non-members."
8898msgstr ""
8899"���� ����� %(also)s ��� �������� �����, ��� �������� ��� \n"
8900"            � ������� ��� ����� ��� ����� ���������� �' ������ ��� ��� "
8901"����� \n"
8902"���� ��� ������."
8903
8904#: Mailman/HTMLFormatter.py:211
8905msgid ""
8906"This is %(also)sa hidden list, which means that the\n"
8907"            list of members is available only to the list administrator."
8908msgstr ""
8909"���� ����� %(also)sa ��� ����� �����, ��� �������� ���\n"
8910"            � ������� ��� ����� ����� ���������� ���� ����������� ��� ������."
8911
8912#: Mailman/HTMLFormatter.py:214
8913msgid ""
8914"This is %(also)sa public list, which means that the\n"
8915"            list of members list is available to everyone."
8916msgstr ""
8917"���� �����%(also)sa ��� ������� �����, ��� �������� ��� \n"
8918"            � ������� ��� ����� ����� ���������� ���� ������."
8919
8920#: Mailman/HTMLFormatter.py:217
8921msgid ""
8922" (but we obscure the addresses so they are not\n"
8923"                easily recognizable by spammers)."
8924msgstr ""
8925" (���� ������������� ��� ����������� ���� ���� �� ��� \n"
8926"                ����� ������ ������������� ��� ���� spammers)."
8927
8928#: Mailman/HTMLFormatter.py:222
8929msgid ""
8930"<p>(Note that this is an umbrella list, intended to\n"
8931"            have only other mailing lists as members.  Among other things,\n"
8932"            this means that your confirmation request will be sent to the\n"
8933"            `%(sfx)s' account for your address.)"
8934msgstr ""
8935"<p>(��������� ��� ���� ����� ��� �����-�������, �� ��������� ��\n"
8936"            ���� ���� ����� ������ ��� ����.  ������� ��� ���� ��������,\n"
8937"            ���� �������� ��� �� ������ ������������ ��� �� ��������� �� \n"
8938"            `%(sfx)s' account ��� ��� ��������� ���.)"
8939
8940#: Mailman/HTMLFormatter.py:251
8941msgid "<b><i>either</i></b> "
8942msgstr "<b><i>����</i></b>"
8943
8944#: Mailman/HTMLFormatter.py:256
8945msgid ""
8946"To unsubscribe from %(realname)s, get a password reminder,\n"
8947"        or change your subscription options %(either)senter your "
8948"subscription\n"
8949"        email address:\n"
8950"        <p><center> "
8951msgstr ""
8952"��� �� ����������� ��� ����� ��� %(realname)s, �� �������� ��� ���������� "
8953"��� ������� ���������,\n"
8954"        � �� �������� ��� �������� ��� �������� ��� %(either)s, �������� ��� "
8955"��������� email\n"
8956"        ��� �������� ���:\n"
8957"        <p><center> "
8958
8959#: Mailman/HTMLFormatter.py:263
8960msgid "Unsubscribe or edit options"
8961msgstr "����������� ��� ���� � ������������� ��� �������� ���"
8962
8963#: Mailman/HTMLFormatter.py:267
8964msgid ""
8965"<p>... <b><i>or</i></b> select your entry from\n"
8966"                      the subscribers list (see above)."
8967msgstr ""
8968"<p>... <b><i>�</i></b> �������� ��� ���������� ��� ��� \n"
8969"                      ��� ����� ����� (����� ��� ����)."
8970
8971#: Mailman/HTMLFormatter.py:269
8972msgid ""
8973" If you leave the field blank, you will be prompted for\n"
8974"        your email address"
8975msgstr ""
8976" �� ������� �� ����� ����, �� ��� ������� � email \n"
8977"\t\t��������� ���"
8978
8979#: Mailman/HTMLFormatter.py:277
8980msgid ""
8981"(<i>%(which)s is only available to the list\n"
8982"                members.</i>)"
8983msgstr ""
8984"(<i>%(which)s ����� ��������� ���� ��� ����\n"
8985"                 ��� ������.</i>)"
8986
8987#: Mailman/HTMLFormatter.py:281
8988msgid ""
8989"(<i>%(which)s is only available to the list\n"
8990"            administrator.</i>)"
8991msgstr ""
8992"(<i>%(which)s ����� ��������� ���� ����\n"
8993"            ����������� ��� ������.</i>)"
8994
8995#: Mailman/HTMLFormatter.py:291
8996msgid "Click here for the list of "
8997msgstr "������� ��� ��� ��� ����� ���"
8998
8999#: Mailman/HTMLFormatter.py:293
9000msgid " subscribers: "
9001msgstr " �����:"
9002
9003#: Mailman/HTMLFormatter.py:295
9004msgid "Visit Subscriber list"
9005msgstr "������������ ��� ����� ��� �����"
9006
9007#: Mailman/HTMLFormatter.py:298
9008msgid "members"
9009msgstr "����"
9010
9011#: Mailman/HTMLFormatter.py:299
9012msgid "Address:"
9013msgstr "���������:"
9014
9015#: Mailman/HTMLFormatter.py:302
9016msgid "Admin address:"
9017msgstr "��������� �����������:"
9018
9019#: Mailman/HTMLFormatter.py:305
9020msgid "The subscribers list"
9021msgstr "� ����� ��� �����"
9022
9023#: Mailman/HTMLFormatter.py:307
9024msgid " <p>Enter your "
9025msgstr " <p>����� �� ���� ��� "
9026
9027#: Mailman/HTMLFormatter.py:309
9028msgid " and password to visit  the subscribers list: <p><center> "
9029msgstr " ��� ��� ������ ��� �� ������������ �� ����� ��� �����: <p><center> "
9030
9031#: Mailman/HTMLFormatter.py:314
9032msgid "Password: "
9033msgstr "������� ���������: "
9034
9035#: Mailman/HTMLFormatter.py:318
9036msgid "Visit Subscriber List"
9037msgstr "������������ ��� ����� ��� �����"
9038
9039#: Mailman/HTMLFormatter.py:357
9040msgid "Once a month, your password will be emailed to you as a reminder."
9041msgstr ""
9042"��� ���� �� ����, � ������� ��������� �� ��� ������������ �� email ��� \n"
9043"����������"
9044
9045#: Mailman/HTMLFormatter.py:409
9046msgid "The current archive"
9047msgstr "�� ������ �������� ������"
9048
9049#: Mailman/Handlers/Acknowledge.py:59
9050msgid "%(realname)s post acknowledgement"
9051msgstr "����������� ����� ��� ��������� ��� %(realname)s"
9052
9053#: Mailman/Handlers/Approve.py:45
9054msgid ""
9055"Message rejected.\n"
9056"It appears that this message contains an HTML part with the\n"
9057"Approved: password line, but due to the way it is coded in the\n"
9058"HTML it can't be safely removed.\n"
9059msgstr ""
9060
9061#: Mailman/Handlers/CalcRecips.py:79
9062msgid ""
9063"Your urgent message to the %(realname)s mailing list was not authorized for\n"
9064"delivery.  The original message as received by Mailman is attached.\n"
9065msgstr ""
9066"�� ������� ������ ��� ���� ��� ����� %(realname)s ��� ���� ��������������� \n"
9067"��� �������.  ������������� �� ������  ������ ��� ���� ����������� ��� �� "
9068"Mailman.\n"
9069
9070#: Mailman/Handlers/CookHeaders.py:180
9071#, fuzzy
9072msgid "%(realname)s via %(lrn)s"
9073msgstr " (%(label)s) ���������� %(realname)s"
9074
9075#: Mailman/Handlers/Emergency.py:29
9076msgid "Emergency hold on all list traffic is in effect"
9077msgstr "����� ������ ������� ���������� ���� ��� ������� ��� ������"
9078
9079#: Mailman/Handlers/Emergency.py:30 Mailman/Handlers/Hold.py:58
9080msgid "Your message was deemed inappropriate by the moderator."
9081msgstr "�� ������ ��� ������� ���������� ��� ��� ���������� ��� ������"
9082
9083#: Mailman/Handlers/Hold.py:53
9084msgid "Sender is explicitly forbidden"
9085msgstr "� ���������� ����� ���� �������������"
9086
9087#: Mailman/Handlers/Hold.py:54
9088msgid "You are forbidden from posting messages to this list."
9089msgstr "����� ������������� ������ �������� ��������� �' ���� �� �����"
9090
9091#: Mailman/Handlers/Hold.py:57
9092msgid "Post to moderated list"
9093msgstr "�������� �� ����� ��� ��������� ��� ����������"
9094
9095#: Mailman/Handlers/Hold.py:61
9096msgid "Post by non-member to a members-only list"
9097msgstr "�������� �� ������ �� ��� ����� ���� ��� �� ���� ���"
9098
9099#: Mailman/Handlers/Hold.py:62
9100msgid "Non-members are not allowed to post messages to this list."
9101msgstr "��� ����������� � �������� ��������� ���� ���� ��� ���� ��� ������"
9102
9103#: Mailman/Handlers/Hold.py:65
9104msgid "Posting to a restricted list by sender requires approval"
9105msgstr "� �������� �� ��� ���������� ����� ������� ������� "
9106
9107#: Mailman/Handlers/Hold.py:66
9108msgid "This list is restricted; your message was not approved."
9109msgstr "���� � ����� ����� ����������. �� ������ ��� ��� ���������."
9110
9111#: Mailman/Handlers/Hold.py:69
9112msgid "Too many recipients to the message"
9113msgstr "������� ������� ���������� ��� ������."
9114
9115#: Mailman/Handlers/Hold.py:70
9116msgid "Please trim the recipient list; it is too long."
9117msgstr "�������� ��������� ��� ����� ��� ����������&middot; ����� ���� ������."
9118
9119#: Mailman/Handlers/Hold.py:73
9120msgid "Message has implicit destination"
9121msgstr "�� ������ ���� ������ ���������"
9122
9123#: Mailman/Handlers/Hold.py:74
9124msgid ""
9125"Blind carbon copies or other implicit destinations are\n"
9126"not allowed.  Try reposting your message by explicitly including the list\n"
9127"address in the To: or Cc: fields."
9128msgstr ""
9129"����� ����������� (Bcc) � ����� ������ ���������� ��� ������������\n"
9130"������������ �� ������������ �� ������ ��� ��������������� ����� ��� "
9131"��������� \n"
9132"��� ������  ��� �����  ����(To:) � ����. (Cc:)"
9133
9134#: Mailman/Handlers/Hold.py:79
9135msgid "Message may contain administrivia"
9136msgstr "�� ������ ������ �� ������������ administrivia "
9137
9138#: Mailman/Handlers/Hold.py:84
9139msgid ""
9140"Please do *not* post administrative requests to the mailing\n"
9141"list.  If you wish to subscribe, visit %(listurl)s or send a message with "
9142"the\n"
9143"word `help' in it to the request address, %(request)s, for further\n"
9144"instructions."
9145msgstr ""
9146"�������� ��� �������� ������������� �������� ���� �����\n"
9147"�� ������ �� ����������, ������������ �� %(listurl)s � �������� ��� ������ "
9148"�� \n"
9149"��� ���� `help' �' ���� ���� ��������� ���������, %(request)s, ��� ��������\n"
9150"�������."
9151
9152#: Mailman/Handlers/Hold.py:90
9153msgid "Message has a suspicious header"
9154msgstr "�� ������ ���� ������ �����������"
9155
9156#: Mailman/Handlers/Hold.py:91
9157msgid "Your message had a suspicious header."
9158msgstr "�� ������ ��� ���� ������ �����������"
9159
9160#: Mailman/Handlers/Hold.py:101
9161msgid ""
9162"Message body is too big: %(size)d bytes with a limit of\n"
9163"%(limit)d KB"
9164msgstr ""
9165"�� ���� ��� ��������� ����� ���� ������: %(size)d bytes �� ���� ��� ���� "
9166"����� ���\n"
9167"%(limit)d KB"
9168
9169#: Mailman/Handlers/Hold.py:106
9170msgid ""
9171"Your message was too big; please trim it to less than\n"
9172"%(kb)d KB in size."
9173msgstr ""
9174"�� ������ ��� ����� ���� ������&middot; ������� ��������� �� ���� �� ����� "
9175"��������� ��� \n"
9176"%(kb)d  KB ��� �������."
9177
9178#: Mailman/Handlers/Hold.py:110
9179msgid "Posting to a moderated newsgroup"
9180msgstr "�������� �� ��� ����� ���������� �� ����������"
9181
9182#: Mailman/Handlers/Hold.py:252
9183msgid "Your message to %(listname)s awaits moderator approval"
9184msgstr "�� ������ ��� ���� %(listname)s ��������� ��� ������� ��� ����������"
9185
9186#: Mailman/Handlers/Hold.py:271
9187msgid "%(listname)s post from %(sender)s requires approval"
9188msgstr "�� ������ ���� %(listname)s ��� ��� %(sender)s ������� �������"
9189
9190#: Mailman/Handlers/Hold.py:278
9191msgid ""
9192"If you reply to this message, keeping the Subject: header intact, Mailman "
9193"will\n"
9194"discard the held message.  Do this if the message is spam.  If you reply to\n"
9195"this message and include an Approved: header with the list password in it, "
9196"the\n"
9197"message will be approved for posting to the list.  The Approved: header can\n"
9198"also appear in the first line of the body of the reply."
9199msgstr ""
9200"�� ���������� �' ���� �� ������, ����������� ��� �����������  Subject: "
9201"������, �� Mailman ��\n"
9202"��������� ����� ��������� �� ������ ���  ���������. ���������� ���� �� �� "
9203"������ ����� ����������� (spam).  A� ���������� �'\n"
9204"���� �� ������  ��� ������������� ��� �����������  Approved: �� ��� ������ "
9205"��������� ��� ������ �' ����, ��\n"
9206"������ �� �������� ��� �������� ��� �����. � ����������� Approved: ������\n"
9207"������ �� ����������� ���� ����� ������ ��� ���� ��� ���������."
9208
9209#: Mailman/Handlers/MimeDel.py:59
9210msgid "The message's content type was explicitly disallowed"
9211msgstr "� ����� ��� ������������ ��� ������ ����� ���� �������������"
9212
9213#: Mailman/Handlers/MimeDel.py:64
9214msgid "The message's content type was not explicitly allowed"
9215msgstr "� �������� ������������ ��� ������ ��� ����������� ����"
9216
9217#: Mailman/Handlers/MimeDel.py:72
9218msgid "The message's file extension was explicitly disallowed"
9219msgstr "� �������� ������� ��� ������ ����� ���� �������������"
9220
9221#: Mailman/Handlers/MimeDel.py:75
9222msgid "The message's file extension was not explicitly allowed"
9223msgstr "� �������� �������  ��� ������ ��� ����������� ����"
9224
9225#: Mailman/Handlers/MimeDel.py:87
9226msgid "After content filtering, the message was empty"
9227msgstr "���� �� ����������� ��� ������������, �� ������ ������ ����"
9228
9229#: Mailman/Handlers/MimeDel.py:269
9230msgid ""
9231"The attached message matched the %(listname)s mailing list's content "
9232"filtering\n"
9233"rules and was prevented from being forwarded on to the list membership.  "
9234"You\n"
9235"are receiving the only remaining copy of the discarded message.\n"
9236"\n"
9237msgstr ""
9238" �� �������������� ������ �� ����� �������� �� ���� �������  ������� "
9239"������������ ��� %(listname)s ������\n"
9240" ���  ���������� �� ��������� ���� ����� ��� �����.\n"
9241"��������� ���� �� ������������ ����� ��� �� ������ ��� ����������� ����� "
9242"���������.\n"
9243"\n"
9244
9245#: Mailman/Handlers/MimeDel.py:275
9246msgid "Content filtered message notification"
9247msgstr "���������� ��� ������ ��� ����� ����������� ������ �����������"
9248
9249#: Mailman/Handlers/Moderate.py:145
9250#, fuzzy
9251msgid ""
9252"Your message has been rejected, probably because you are not subscribed to "
9253"the\n"
9254"mailing list and the list's policy is to prohibit non-members from posting "
9255"to\n"
9256"it.  If you think that your messages are being rejected in error, contact "
9257"the\n"
9258"mailing list owner at %(listowner)s."
9259msgstr ""
9260"��� ���������� �� �������� �������� �' ���� �� �����, ��� �� ������ ���\n"
9261"���� �������� ����������.  �� ��������� ��� �� �������� ��� ������������� \n"
9262"��� �����, �������������� �� ��� ��������� ��� ������ ��� ��������� "
9263"%(listowner)s."
9264
9265#: Mailman/Handlers/Moderate.py:162
9266msgid "Auto-discard notification"
9267msgstr "���������� ��������� ��������� ����� ���������"
9268
9269#: Mailman/Handlers/Moderate.py:165
9270msgid "The attached message has been automatically discarded."
9271msgstr "�� �������������� ������ ����������� �������� ����� ���������"
9272
9273#: Mailman/Handlers/Replybot.py:75
9274msgid "Auto-response for your message to the \"%(realname)s\" mailing list"
9275msgstr "�������� �������� ��� �� ������ ��� ���� ����� \"%(realname)s\""
9276
9277#: Mailman/Handlers/Replybot.py:108
9278msgid "The Mailman Replybot"
9279msgstr "������� ��������� ��������� ��� Mailman"
9280
9281#: Mailman/Handlers/Scrubber.py:208
9282msgid ""
9283"An embedded and charset-unspecified text was scrubbed...\n"
9284"Name: %(filename)s\n"
9285"URL: %(url)s\n"
9286msgstr ""
9287"��� ������������ ��� �� ������������� ��� ���������� ������� "
9288"����������� ...\n"
9289"Name: %(filename)s\n"
9290"Url: %(url)s\n"
9291
9292#: Mailman/Handlers/Scrubber.py:218
9293msgid "HTML attachment scrubbed and removed"
9294msgstr "To �������� HTML ����������� ��� �������������"
9295
9296#: Mailman/Handlers/Scrubber.py:234 Mailman/Handlers/Scrubber.py:259
9297msgid ""
9298"An HTML attachment was scrubbed...\n"
9299"URL: %(url)s\n"
9300msgstr ""
9301"��� �������� HTML �����������...\n"
9302"URL: %(url)s\n"
9303
9304#: Mailman/Handlers/Scrubber.py:271
9305msgid "no subject"
9306msgstr "����� ����"
9307
9308#: Mailman/Handlers/Scrubber.py:273
9309msgid "no date"
9310msgstr "����� ����������"
9311
9312#: Mailman/Handlers/Scrubber.py:274
9313msgid "unknown sender"
9314msgstr "�������� ����������"
9315
9316#: Mailman/Handlers/Scrubber.py:276
9317msgid ""
9318"An embedded message was scrubbed...\n"
9319"From: %(who)s\n"
9320"Subject: %(subject)s\n"
9321"Date: %(date)s\n"
9322"Size: %(size)s\n"
9323"URL: %(url)s\n"
9324msgstr ""
9325"��� ������������ ������ �����������...\n"
9326"���: %(who)s\n"
9327"����: %(subject)s\n"
9328"�����: %(date)s\n"
9329"�������: %(size)s\n"
9330"��������� �����: %(url)s\n"
9331
9332#: Mailman/Handlers/Scrubber.py:308
9333msgid ""
9334"A non-text attachment was scrubbed...\n"
9335"Name: %(filename)s\n"
9336"Type: %(ctype)s\n"
9337"Size: %(size)d bytes\n"
9338"Desc: %(desc)s\n"
9339"URL: %(url)s\n"
9340msgstr ""
9341"��� ��������� ��� ��� �������� ������� �����������...\n"
9342"�����: %(filename)s\n"
9343"�����: %(ctype)s\n"
9344"�������: %(size)d bytes\n"
9345"Desc: %(desc)s\n"
9346"��������� �����: %(url)s\n"
9347
9348#: Mailman/Handlers/Scrubber.py:347
9349msgid "Skipped content of type %(partctype)s\n"
9350msgstr "�������� ������������ �� ���� %(partctype)s\n"
9351
9352#: Mailman/Handlers/Scrubber.py:388
9353msgid "-------------- next part --------------\n"
9354msgstr "-------------- ������� ����� --------------\n"
9355
9356#: Mailman/Handlers/SpamDetect.py:64
9357#, fuzzy
9358msgid "Header matched regexp: %(pattern)s"
9359msgstr "������������ ��������� (matched %(pattern)s)"
9360
9361#: Mailman/Handlers/SpamDetect.py:127
9362#, fuzzy
9363msgid ""
9364"You are not allowed to post to this mailing list From: a domain which\n"
9365"publishes a DMARC policy of reject or quarantine, and your message has been\n"
9366"automatically rejected.  If you think that your messages are being rejected "
9367"in\n"
9368"error, contact the mailing list owner at %(listowner)s."
9369msgstr ""
9370"��� ���������� �� �������� �������� �' ���� �� �����, ��� �� ������ ���\n"
9371"���� �������� ����������.  �� ��������� ��� �� �������� ��� ������������� \n"
9372"��� �����, �������������� �� ��� ��������� ��� ������ ��� ��������� "
9373"%(listowner)s."
9374
9375#: Mailman/Handlers/SpamDetect.py:197
9376msgid "Message rejected by filter rule match"
9377msgstr "�� ������ ����������� ������ ��������� �� ���� ������ �������������� "
9378
9379#: Mailman/Handlers/ToDigest.py:173
9380msgid "%(realname)s Digest, Vol %(volume)d, Issue %(issue)d"
9381msgstr "%(realname)s ������, Vol %(volume)d, ���������� %(issue)d"
9382
9383#: Mailman/Handlers/ToDigest.py:219
9384msgid "digest header"
9385msgstr "����������� �������"
9386
9387#: Mailman/Handlers/ToDigest.py:222
9388msgid "Digest Header"
9389msgstr "����������� �������"
9390
9391#: Mailman/Handlers/ToDigest.py:235
9392msgid "Today's Topics:\n"
9393msgstr "�������� ������:\n"
9394
9395#: Mailman/Handlers/ToDigest.py:315
9396msgid "Today's Topics (%(msgcount)d messages)"
9397msgstr "�������� ������ (%(msgcount)d ���������)"
9398
9399#: Mailman/Handlers/ToDigest.py:341
9400msgid "[Message discarded by content filter]"
9401msgstr "[�� ������ ���������� ����� ��������� ��� ��� ������ ������������]"
9402
9403#: Mailman/Handlers/ToDigest.py:369
9404msgid "digest footer"
9405msgstr "��������� �������"
9406
9407#: Mailman/Handlers/ToDigest.py:372 Mailman/Handlers/ToDigest.py:380
9408msgid "Digest Footer"
9409msgstr "��������� �������"
9410
9411#: Mailman/Handlers/ToDigest.py:387
9412msgid "End of "
9413msgstr "����� ��� "
9414
9415#: Mailman/ListAdmin.py:309
9416msgid "Posting of your message titled \"%(subject)s\""
9417msgstr "�������� ��� ��������� ��� �� ����� \"%(subject)s\""
9418
9419#: Mailman/ListAdmin.py:310 Mailman/ListAdmin.py:433
9420msgid "[No reason given]"
9421msgstr "[�� ������� �����]"
9422
9423#: Mailman/ListAdmin.py:348
9424msgid "Forward of moderated message"
9425msgstr "�������� ��������� ������������ ��� ��� ����������"
9426
9427#: Mailman/ListAdmin.py:405
9428msgid "New subscription request to list %(realname)s from %(addr)s"
9429msgstr "��� ������ �������� ���� ����� %(realname)s ��� %(addr)s"
9430
9431#: Mailman/ListAdmin.py:432
9432msgid "Subscription request"
9433msgstr "������ ��������"
9434
9435#: Mailman/ListAdmin.py:442
9436#, fuzzy
9437msgid "via admin approval"
9438msgstr "�������� �������� ��������"
9439
9440#: Mailman/ListAdmin.py:466
9441msgid "New unsubscription request from %(realname)s by %(addr)s"
9442msgstr "��� ������ ��������� ��� ��� %(realname)s ��� %(addr)s"
9443
9444#: Mailman/ListAdmin.py:490
9445msgid "Unsubscription request"
9446msgstr "������ ���������"
9447
9448#: Mailman/ListAdmin.py:523
9449msgid "Original Message"
9450msgstr "������ ������"
9451
9452#: Mailman/ListAdmin.py:526
9453msgid "Request to mailing list %(realname)s rejected"
9454msgstr "�� ������ ���� �� ����� %(realname)s �����������"
9455
9456#: Mailman/MTA/Manual.py:66
9457msgid ""
9458"The mailing list `%(listname)s' has been created via the through-the-web\n"
9459"interface.  In order to complete the activation of this mailing list, the\n"
9460"proper /etc/aliases (or equivalent) file must be updated.  The program\n"
9461"`newaliases' may also have to be run.\n"
9462"\n"
9463"Here are the entries for the /etc/aliases file:\n"
9464msgstr ""
9465"� ����� `%(listname)s' ������������� �� ����� ��� �������������\n"
9466"web. ��� �� ����������� � ������������  ����� ��� ������, ��\n"
9467"��������� /etc/aliases (� ��������� ������ ������ �� ����������.  �� "
9468"���������\n"
9469"`newaliases'  �� ������ ������ �� ����������.\n"
9470"\n"
9471"��� �������� �� �������� ��� �� ������ /etc/aliases :\n"
9472
9473#: Mailman/MTA/Manual.py:77
9474msgid ""
9475"To finish creating your mailing list, you must edit your /etc/aliases (or\n"
9476"equivalent) file by adding the following lines, and possibly running the\n"
9477"`newaliases' program:\n"
9478msgstr ""
9479"��� �� ����������� � ���������� ��� ������ ���, ������ �� ������������� ��\n"
9480"/etc/aliases ������ (� ���������) ������������ ��� ��������� �������, ��� \n"
9481"������� ���������� �� ��������� `newaliases'\n"
9482
9483#: Mailman/MTA/Manual.py:82
9484msgid "## %(listname)s mailing list"
9485msgstr "## %(listname)s �����"
9486
9487#: Mailman/MTA/Manual.py:99
9488msgid "Mailing list creation request for list %(listname)s"
9489msgstr "������ ����������� ������ ��� ��� ����� %(listname)s"
9490
9491#: Mailman/MTA/Manual.py:113
9492msgid ""
9493"The mailing list `%(listname)s' has been removed via the through-the-web\n"
9494"interface.  In order to complete the de-activation of this mailing list, "
9495"the\n"
9496"appropriate /etc/aliases (or equivalent) file must be updated.  The program\n"
9497"`newaliases' may also have to be run.\n"
9498"\n"
9499"Here are the entries in the /etc/aliases file that should be removed:\n"
9500msgstr ""
9501"� ����� `%(listname)s' ���������� �� ����� ��� �������������\n"
9502"web.  �� ����� �� ����������� � �������������� ��� ������ �����, ��\n"
9503"������ �� ���������� �� ��������� /etc/aliases (� ��������� ) ������.  �� "
9504"���������\n"
9505"`newaliases' ������ ������ �� ������ �� ����������.\n"
9506"\n"
9507"����� ����� �� ������������ ��� ������ /etc/aliases ��� �� ������ �� "
9508"����������:\n"
9509
9510#: Mailman/MTA/Manual.py:123
9511msgid ""
9512"\n"
9513"To finish removing your mailing list, you must edit your /etc/aliases (or\n"
9514"equivalent) file by removing the following lines, and possibly running the\n"
9515"`newaliases' program:\n"
9516"\n"
9517"## %(listname)s mailing list"
9518msgstr ""
9519"\n"
9520"��� �� ����������� � �������� ��� ������ ��� ,  ������ �� ������������� �� "
9521"������\n"
9522" /etc/aliases (� �� ��������� ���) ������������ ��� ��������� �������, ��� "
9523"����������\n"
9524"�� ��������� `newaliases':\n"
9525"\n"
9526"## %(listname)s �����"
9527
9528#: Mailman/MTA/Manual.py:142
9529msgid "Mailing list removal request for list %(listname)s"
9530msgstr "������ ��������� ��� ��� ����� %(listname)s"
9531
9532#: Mailman/MTA/Postfix.py:442
9533msgid "checking permissions on %(file)s"
9534msgstr "������� ����������� ��� %(file)s"
9535
9536#: Mailman/MTA/Postfix.py:452
9537msgid "%(file)s permissions must be 0664 (got %(octmode)s)"
9538msgstr ""
9539" �� ���������� ��� %(file)s ������ �� ����� 0664 (��� ����� %(octmode)s)"
9540
9541#: Mailman/MTA/Postfix.py:454 Mailman/MTA/Postfix.py:482
9542#: Mailman/MTA/Postfix.py:493 bin/check_perms:125 bin/check_perms:153
9543#: bin/check_perms:163 bin/check_perms:174 bin/check_perms:199
9544#: bin/check_perms:216 bin/check_perms:242 bin/check_perms:265
9545#: bin/check_perms:284 bin/check_perms:298 bin/check_perms:318
9546#: bin/check_perms:358
9547msgid "(fixing)"
9548msgstr "(��������)"
9549
9550#: Mailman/MTA/Postfix.py:470
9551msgid "checking ownership of %(dbfile)s"
9552msgstr "������� ��������� ��� %(dbfile)s"
9553
9554#: Mailman/MTA/Postfix.py:478
9555msgid "%(dbfile)s owned by %(owner)s (must be owned by %(user)s"
9556msgstr ""
9557"�� ������ %(dbfile)s ���� ��������� %(owner)s (������ �� ���� ��������� "
9558"%(user)s"
9559
9560#: Mailman/MTA/Postfix.py:491
9561msgid "%(dbfile)s permissions must be 0664 (got %(octmode)s)"
9562msgstr ""
9563" �� ���������� ��� %(dbfile)s ������ �� ����� 0664 (��� ����� %(octmode)s)"
9564
9565#: Mailman/MailList.py:219
9566msgid "Your confirmation is required to join the %(listname)s mailing list"
9567msgstr "����� ���������� �� ���������� ���� ����� %(listname)s"
9568
9569#: Mailman/MailList.py:230
9570msgid "Your confirmation is required to leave the %(listname)s mailing list"
9571msgstr "��� ����� ����� ��� %(listname)s ������"
9572
9573#: Mailman/MailList.py:999 Mailman/MailList.py:1492
9574msgid " from %(remote)s"
9575msgstr " ��� ��� ip %(remote)s"
9576
9577#: Mailman/MailList.py:1043
9578msgid "subscriptions to %(realname)s require moderator approval"
9579msgstr "� ������� ���� %(realname)s ������� ��� ������� ��� ����������"
9580
9581#: Mailman/MailList.py:1125 bin/add_members:299
9582msgid "%(realname)s subscription notification"
9583msgstr "���������� �������� ���� %(realname)s"
9584
9585#: Mailman/MailList.py:1145
9586msgid "unsubscriptions require moderator approval"
9587msgstr "� �������� ������� ��� ������� ��� ����������"
9588
9589#: Mailman/MailList.py:1166
9590msgid "%(realname)s unsubscribe notification"
9591msgstr "���������� ��������� ��� ��� %(realname)s"
9592
9593#: Mailman/MailList.py:1328
9594#, fuzzy
9595msgid "%(realname)s address change notification"
9596msgstr "���������� ��������� ��� ��� %(realname)s"
9597
9598#: Mailman/MailList.py:1362
9599#, fuzzy
9600msgid "via email confirmation"
9601msgstr "�� ������ ���������� ������������"
9602
9603#: Mailman/MailList.py:1371
9604#, fuzzy
9605msgid "via web confirmation"
9606msgstr "�� ������ ���������� ������������"
9607
9608#: Mailman/MailList.py:1396
9609msgid "subscriptions to %(name)s require administrator approval"
9610msgstr "� ������� ����  %(name)s ������� ��� ������� ��� �����������"
9611
9612#: Mailman/MailList.py:1406
9613#, fuzzy
9614msgid "email confirmation"
9615msgstr "�� ������ ���������� ������������"
9616
9617#: Mailman/MailList.py:1408
9618#, fuzzy
9619msgid "web confirmation"
9620msgstr "�������� �� cookie ������������"
9621
9622#: Mailman/MailList.py:1666
9623msgid "Last autoresponse notification for today"
9624msgstr "��������� ���������� ��������� ��������� ��� ������"
9625
9626#: Mailman/Queue/BounceRunner.py:360
9627msgid ""
9628"The attached message was received as a bounce, but either the bounce format\n"
9629"was not recognized, or no member addresses could be extracted from it.  "
9630"This\n"
9631"mailing list has been configured to send all unrecognized bounce messages "
9632"to\n"
9633"the list administrator(s).\n"
9634"\n"
9635"For more information see:\n"
9636"%(adminurl)s\n"
9637"\n"
9638msgstr ""
9639"�� �������������� ������ ����������� ��� ������������� ������ (bounce), ���� "
9640"� ����� ���\n"
9641"��� �������������, � ��� ������ �� ������� � ��������� ��� ������ ��' ����. "
9642"����\n"
9643"� ����� ���� ��������� �� ������� ��� �� �� �������������� �������� ����\n"
9644"����������� ��� ������.\n"
9645"\n"
9646"��� ������������ ����������� �����:\n"
9647"%(adminurl)s\n"
9648"\n"
9649
9650#: Mailman/Queue/BounceRunner.py:370
9651msgid "Uncaught bounce notification"
9652msgstr "���������� ����������� �������������� ���������"
9653
9654#: Mailman/Queue/CommandRunner.py:98
9655msgid "Ignoring non-text/plain MIME parts"
9656msgstr "������� �������� MIME ��� ��� ����� text/plain"
9657
9658#: Mailman/Queue/CommandRunner.py:177
9659msgid ""
9660"The results of your email command are provided below.\n"
9661"Attached is your original message.\n"
9662msgstr ""
9663"T� ������������ ��� email ������� ��� ���������� ��� ����.\n"
9664"������������� �� ������ ��� ������.\n"
9665
9666#: Mailman/Queue/CommandRunner.py:182
9667msgid "- Results:"
9668msgstr "- ������������:"
9669
9670#: Mailman/Queue/CommandRunner.py:188
9671msgid ""
9672"\n"
9673"- Unprocessed:"
9674msgstr ""
9675"\n"
9676"- �������������:"
9677
9678#: Mailman/Queue/CommandRunner.py:192
9679msgid ""
9680"No commands were found in this message.\n"
9681"To obtain instructions, send a message containing just the word \"help\".\n"
9682msgstr ""
9683"��� ������ ���� ��� �������� �������.\n"
9684"��� �� ������ �������, ������� ��� ������ ��� �� �������� ���� ��� ���� "
9685"\"help\".\n"
9686
9687#: Mailman/Queue/CommandRunner.py:197
9688msgid ""
9689"\n"
9690"- Ignored:"
9691msgstr ""
9692"\n"
9693"- ���������:"
9694
9695#: Mailman/Queue/CommandRunner.py:199
9696msgid ""
9697"\n"
9698"- Done.\n"
9699"\n"
9700msgstr ""
9701"\n"
9702"- ������������.\n"
9703"\n"
9704
9705#: Mailman/Queue/CommandRunner.py:223
9706msgid "The results of your email commands"
9707msgstr "�� ������������� ��� ��� email ������ ���"
9708
9709#: Mailman/Queue/CommandRunner.py:229
9710msgid "Message body suppressed by Mailman site configuration\n"
9711msgstr ""
9712
9713#: Mailman/Queue/CommandRunner.py:231
9714msgid "Original message suppressed by Mailman site configuration\n"
9715msgstr ""
9716
9717#: Mailman/htmlformat.py:675
9718msgid "Delivered by Mailman<br>version %(version)s"
9719msgstr "���������� ���� ��� Mailman<br>������ %(version)s"
9720
9721#: Mailman/htmlformat.py:676
9722msgid "Python Powered"
9723msgstr "Python Powered"
9724
9725#: Mailman/htmlformat.py:677
9726msgid "Gnu's Not Unix"
9727msgstr "Gnu's ��� Unix"
9728
9729#: Mailman/i18n.py:132
9730msgid "Mon"
9731msgstr "���"
9732
9733#: Mailman/i18n.py:132
9734msgid "Thu"
9735msgstr "���"
9736
9737#: Mailman/i18n.py:132
9738msgid "Tue"
9739msgstr "���"
9740
9741#: Mailman/i18n.py:132
9742msgid "Wed"
9743msgstr "���"
9744
9745#: Mailman/i18n.py:133
9746msgid "Fri"
9747msgstr "���"
9748
9749#: Mailman/i18n.py:133
9750msgid "Sat"
9751msgstr "���"
9752
9753#: Mailman/i18n.py:133
9754msgid "Sun"
9755msgstr "���"
9756
9757#: Mailman/i18n.py:137
9758msgid "Apr"
9759msgstr "���"
9760
9761#: Mailman/i18n.py:137
9762msgid "Feb"
9763msgstr "���"
9764
9765#: Mailman/i18n.py:137
9766msgid "Jan"
9767msgstr "���"
9768
9769#: Mailman/i18n.py:137
9770msgid "Jun"
9771msgstr "����"
9772
9773#: Mailman/i18n.py:137
9774msgid "Mar"
9775msgstr "���"
9776
9777#: Mailman/i18n.py:138
9778msgid "Aug"
9779msgstr "���"
9780
9781#: Mailman/i18n.py:138
9782msgid "Dec"
9783msgstr "���"
9784
9785#: Mailman/i18n.py:138
9786msgid "Jul"
9787msgstr "����"
9788
9789#: Mailman/i18n.py:138
9790msgid "Nov"
9791msgstr "���"
9792
9793#: Mailman/i18n.py:138
9794msgid "Oct"
9795msgstr "���"
9796
9797#: Mailman/i18n.py:138
9798msgid "Sep"
9799msgstr "���"
9800
9801#: Mailman/i18n.py:141
9802msgid "Server Local Time"
9803msgstr "������ ��� �����������"
9804
9805#: Mailman/i18n.py:180
9806msgid ""
9807"%(wday)s %(mon)s %(day)2i %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s %(year)04i"
9808msgstr ""
9809"%(wday)s %(day)2i %(mon)s %(year)04i  %(hh)02i:%(mm)02i:%(ss)02i %(tzname)s "
9810
9811#: bin/add_members:22
9812#, fuzzy
9813msgid ""
9814"Add members to a list from the command line.\n"
9815"\n"
9816"Usage:\n"
9817"    add_members [options] listname\n"
9818"\n"
9819"Options:\n"
9820"\n"
9821"    --regular-members-file=file\n"
9822"    -r file\n"
9823"        A file containing addresses of the members to be added, one\n"
9824"        address per line.  This list of people become non-digest\n"
9825"        members.  If file is `-', read addresses from stdin.\n"
9826"\n"
9827"    --digest-members-file=file\n"
9828"    -d file\n"
9829"        Similar to above, but these people become digest members.\n"
9830"\n"
9831"    --invite\n"
9832"    -i\n"
9833"        Specify this if you only want to invite the users to a list\n"
9834"        instead of subscribing them.\n"
9835"\n"
9836"    --invite-msg-file=file\n"
9837"    -m file\n"
9838"        This will prepend the message in the file to the invite email that\n"
9839"        gets generated when --invite is set.\n"
9840"\n"
9841"    --welcome-msg=<y|n>\n"
9842"    -w <y|n>\n"
9843"        Set whether or not to send the list members a welcome message,\n"
9844"        overriding whatever the list's `send_welcome_msg' setting is.  This\n"
9845"        is ignored and the list's setting at the time of acceptance is used\n"
9846"        if --invite is set.\n"
9847"\n"
9848"    --admin-notify=<y|n>\n"
9849"    -a <y|n>\n"
9850"        Set whether or not to send the list administrators a notification "
9851"on\n"
9852"        the success/failure of these subscriptions, overriding whatever the\n"
9853"        list's `admin_notify_mchanges' setting is.  This is ignored and the\n"
9854"        list's setting at the time of acceptance is used if --invite is "
9855"set.\n"
9856"\n"
9857"    --nomail\n"
9858"    -n\n"
9859"        Set the newly added members mail delivery to disabled by admin.  "
9860"This\n"
9861"        is ignored if --invite is set.\n"
9862"\n"
9863"    --help\n"
9864"    -h\n"
9865"        Print this help message and exit.\n"
9866"\n"
9867"    listname\n"
9868"        The name of the Mailman list you are adding members to.  It must\n"
9869"        already exist.\n"
9870"\n"
9871"You must supply at least one of -r and -d options.  At most one of the\n"
9872"files can be `-'.\n"
9873msgstr ""
9874"�������� ����� �� ��� ����� ��� ������ �������.\n"
9875"\n"
9876"�����:\n"
9877"    add_members [options] ����� ������\n"
9878"\n"
9879"��������:\n"
9880"\n"
9881"    --regular-members-file=file\n"
9882"    -r file\n"
9883"        ��� ������ ������������ ��� ����������� ��� ����� ��� ������ �� "
9884"����������, ���\n"
9885"        ��������� ��� ������.  ���� � ����� ��� ����� ������� non-digest\n"
9886"        ����.  �� �� ������ ����� `-', ������� ��� ����������� ��� stdin.  "
9887"��������� ��� �� ������ ���\n"
9888"        -n/--non-digest-����� ����� (deprecated) �������� ��� ����� ��� "
9889"�������.\n"
9890"\n"
9891"    --digest-members-file=file\n"
9892"    -d file\n"
9893"        ��������� �� �� �������, ���� ���� �� ���� �������� ���� ����������� "
9894"(digest members).\n"
9895"\n"
9896"    --welcome-msg=<y|n>\n"
9897"    -w <y|n>\n"
9898"        ������ �� ������ � ��� �� ������ ��� ���� ��������� ��� ����������� "
9899"������,\n"
9900"        �������������� ����������� ������� ��� ������ `send_welcome_msg' .\n"
9901"\n"
9902"    --admin-notify=<y|n>\n"
9903"    -a <y|n>\n"
9904"        ������ �� ������ � ��� �� ������ ���� ����������� ��� ������ ��� "
9905"���������� �������\n"
9906"        �� ��� ��������/�������� ��� ��������, �������������� ����������� "
9907"������� ��� ������ `admin_notify_mchanges'.\n"
9908"\n"
9909"    --help\n"
9910"    -h\n"
9911"        ��������� �� ��������� ������ ��� ���������.\n"
9912"\n"
9913"    ����� ��� ������\n"
9914"        �� ����� ��� ������ Mailman ���� ����� ��������� �� ���������� "
9915"����.  ������ �� ������� ���.\n"
9916"\n"
9917"������ �� �������� ����������� ��� ��� ��� -r ��� -d ��������.  �� ����-���� "
9918"��� ���\n"
9919"������ ������ �� ����� `-'.\n"
9920
9921#: bin/add_members:162 bin/add_members:172
9922msgid "Already a member: %(member)s"
9923msgstr "����� ��� �����: %(member)s"
9924
9925#: bin/add_members:178
9926msgid "Bad/Invalid email address: blank line"
9927msgstr "����/����� ��������� email: � ���� ������ "
9928
9929#: bin/add_members:180
9930msgid "Bad/Invalid email address: %(member)s"
9931msgstr "����/����� ��������� email: %(member)s"
9932
9933#: bin/add_members:182
9934msgid "Hostile address (illegal characters): %(member)s"
9935msgstr "������� ��������� (������������ ����������): %(member)s"
9936
9937#: bin/add_members:185
9938#, fuzzy
9939msgid "Invited: %(member)s"
9940msgstr "������� ��� ����� %(member)s"
9941
9942#: bin/add_members:187
9943msgid "Subscribed: %(member)s"
9944msgstr "������� ��� ����� %(member)s"
9945
9946#: bin/add_members:237
9947msgid "Bad argument to -w/--welcome-msg: %(arg)s"
9948msgstr "��������� ������ ��  -w/--welcome-msg: %(arg)s"
9949
9950#: bin/add_members:244
9951msgid "Bad argument to -a/--admin-notify: %(arg)s"
9952msgstr "��������� ������ �� -a/--admin-notify: %(arg)s"
9953
9954#: bin/add_members:252
9955msgid "Cannot read both digest and normal members from standard input."
9956msgstr ""
9957"��� ����� ������� �� ���������� ��������� ��� �������� ���� ��� ��� "
9958"������������ ������"
9959
9960#: bin/add_members:256
9961msgid "Setting invite-msg-file requires --invite."
9962msgstr ""
9963
9964#: bin/add_members:261 bin/config_list:110 bin/export.py:271 bin/find_member:97
9965#: bin/inject:91 bin/list_admins:90 bin/list_members:252 bin/sync_members:222
9966#: cron/bumpdigests:86
9967msgid "No such list: %(listname)s"
9968msgstr "��� ������� ������ �����: %(listname)s"
9969
9970#: bin/add_members:285 bin/change_pw:159 bin/check_db:114 bin/discard:83
9971#: bin/sync_members:244 bin/update:302 bin/update:323 bin/update:577
9972#: cron/bumpdigests:78
9973msgid "Nothing to do."
9974msgstr "��� ������� ������ ���� ��������."
9975
9976#: bin/arch:19
9977msgid ""
9978"Rebuild a list's archive.\n"
9979"\n"
9980"Use this command to rebuild the archives for a mailing list.  You may want "
9981"to\n"
9982"do this if you edit some messages in an archive, or remove some messages "
9983"from\n"
9984"an archive.\n"
9985"\n"
9986"Usage: %(PROGRAM)s [options] <listname> [<mbox>]\n"
9987"\n"
9988"Where options are:\n"
9989"    -h / --help\n"
9990"        Print this help message and exit.\n"
9991"\n"
9992"    -q / --quiet\n"
9993"        Make the archiver output less verbose.\n"
9994"\n"
9995"    --wipe\n"
9996"        First wipe out the original archive before regenerating.  You "
9997"usually\n"
9998"        want to specify this argument unless you're generating the archive "
9999"in\n"
10000"        chunks.\n"
10001"\n"
10002"    -s N\n"
10003"    --start=N\n"
10004"        Start indexing at article N, where article 0 is the first in the "
10005"mbox.\n"
10006"        Defaults to 0.\n"
10007"\n"
10008"    -e M\n"
10009"    --end=M\n"
10010"        End indexing at article M.  This script is not very efficient with\n"
10011"        respect to memory management, and for large archives, it may not be\n"
10012"        possible to index the mbox entirely.  For that reason, you can "
10013"specify\n"
10014"        the start and end article numbers.\n"
10015"\n"
10016"Where <mbox> is the path to a list's complete mbox archive.  Usually this "
10017"will\n"
10018"be some path in the archives/private directory.  For example:\n"
10019"\n"
10020"%% bin/arch mylist archives/private/mylist.mbox/mylist.mbox\n"
10021"\n"
10022"<mbox> is optional.  If it is missing, it is calculated.\n"
10023msgstr ""
10024"���������������� �� archive ���� ������.\n"
10025"\n"
10026"��������������� ���� ��� ������ ��� �� ����������������� �� �������� ������ "
10027"��� ��� �����.  ������ �� �������� �� ��\n"
10028"������ ���� �� �������������� ������ �������� �� ��� �������� ������, � "
10029"���������� ������ �������� ���\n"
10030"��� �������� ������.\n"
10031"\n"
10032"�����: %(PROGRAM)s [options] <listname> [<mbox>]\n"
10033"\n"
10034"���� �������� �����:\n"
10035"    -h / --help\n"
10036"        ��������� �� ��������� ������ ��� ���������.\n"
10037"\n"
10038"    -q / --quiet\n"
10039"        ����� ��� ����� ��� ��������� ������� �������� ������.\n"
10040"\n"
10041"    --wipe\n"
10042"        ������ ��������� �� ������ ������ ���� �����������.  ����� �������\n"
10043"        ������ �� ������������� ���� �� ���������� ����� �� �������� �� "
10044"������ ��\n"
10045"        ������ �������.\n"
10046"\n"
10047"    -s N\n"
10048"    --start=N\n"
10049".       �������� ��� ������������ ��� ����� N, ���� �� ������ 0 ����� �� "
10050"����� ��� mbox.\n"
10051"        �� �������������� ����� �� 0.\n"
10052"\n"
10053"    -e M\n"
10054"    --end=M\n"
10055"        ��������� ��� ������������ ��� ����� M.  ���� �� script ��� ����� "
10056"���� ��������� ��\n"
10057"        ���� ��� ������� ��� ���������� ������, ��� ��� ������� �������, "
10058"���� �� ��� �����\n"
10059"        ������ � ������������ ��� mbox �� ���������.  ������ ��� ����, "
10060"�������� �� �������������\n"
10061"        ��� ���� ��� �� ����� ��� ������� ��� ������.\n"
10062"\n"
10063"���� <mbox> ����� ��� �������� ���� ������ ������ ��������� mbox.  ������� "
10064"���� ��\n"
10065"����� ������ �������� �� ����������/�������� ��������.  ��� ����������:\n"
10066"\n"
10067"%% �� bin/arch ��� ������ ��� archives/private/mylist.mbox/mylist.mbox\n"
10068"\n"
10069"<mbox> ����� �����������.  �� ������, ������������.\n"
10070
10071#: bin/arch:125
10072msgid "listname is required"
10073msgstr "���������� �� ����� ��� ������"
10074
10075#: bin/arch:143 bin/change_pw:107 bin/config_list:257
10076msgid ""
10077"No such list \"%(listname)s\"\n"
10078"%(e)s"
10079msgstr ""
10080"��� ������� ������ ����� \"%(listname)s\"\n"
10081"%(e)s"
10082
10083#: bin/arch:168
10084msgid "Cannot open mbox file %(mbox)s: %(msg)s"
10085msgstr "��� ����� �� ������ �� ��������������� %(mbox)s: %(msg)s"
10086
10087#: bin/b4b5-archfix:19
10088msgid ""
10089"Fix the MM2.1b4 archives.\n"
10090"\n"
10091"Usage: %(PROGRAM)s [options] file ...\n"
10092"\n"
10093"Where options are:\n"
10094"    -h / --help\n"
10095"        Print this help message and exit.\n"
10096"\n"
10097"Only use this to `fix' some archive database files that may have gotten\n"
10098"written in Mailman 2.1b4 with some bogus data.  Use like this from your\n"
10099"$PREFIX directory\n"
10100"\n"
10101"%% %(PROGRAM)s `grep -l _mlist archives/private/*/database/*-article`\n"
10102"\n"
10103"(note the backquotes are required)\n"
10104"\n"
10105"You will need to run `bin/check_perms -f' after running this script.\n"
10106msgstr ""
10107"����������� ��� ��������� ������� MM2.1b4.\n"
10108"\n"
10109"�����: %(PROGRAM)s [options] ������ ...\n"
10110"\n"
10111"���� �� �������� �����:\n"
10112"    -h / --help\n"
10113"        ��������� �� ��������� ������ ��� ���������.\n"
10114"\n"
10115"�������������� �� ���� ���� ��� �� `�������������' ������ �������� �������� "
10116"������� ��� ������ �� �����\n"
10117"������ �� Mailman 2.1b4 �� ������ ����� ��������.  ��������������� �� ���� "
10118"���� ���\n"
10119"$PREFIX ���������\n"
10120"\n"
10121"%% %(PROGRAM)s `grep -l _mlist archives/private/*/database/*-article`\n"
10122"\n"
10123"(��������� ��� �� backquotes �����������)\n"
10124"\n"
10125"�� ������ �� ������� �� `bin/check_perms -f' ���� ����� ������ ���� �� "
10126"script.\n"
10127
10128#: bin/change_pw:20
10129msgid ""
10130"Change a list's password.\n"
10131"\n"
10132"Prior to Mailman 2.1, list passwords were kept in crypt'd format -- "
10133"usually.\n"
10134"Some Python installations didn't have the crypt module available, so they'd\n"
10135"fall back to md5.  Then suddenly the Python installation might grow a crypt\n"
10136"module and all list passwords would be broken.\n"
10137"\n"
10138"In Mailman 2.1, all list and site passwords are stored in SHA1 hexdigest\n"
10139"form.  This breaks list passwords for all existing pre-Mailman 2.1 lists, "
10140"and\n"
10141"since those passwords aren't stored anywhere in plain text, they cannot be\n"
10142"retrieved and updated.\n"
10143"\n"
10144"Thus, this script generates new passwords for a list, and optionally sends "
10145"it\n"
10146"to all the owners of the list.\n"
10147"\n"
10148"Usage: change_pw [options]\n"
10149"\n"
10150"Options:\n"
10151"\n"
10152"    --all / -a\n"
10153"        Change the password for all lists.\n"
10154"\n"
10155"    --domain=domain\n"
10156"    -d domain\n"
10157"        Change the password for all lists in the virtual domain `domain'.  "
10158"It\n"
10159"        is okay to give multiple -d options.\n"
10160"\n"
10161"    --listname=listname\n"
10162"    -l listname\n"
10163"        Change the password only for the named list.  It is okay to give\n"
10164"        multiple -l options.\n"
10165"\n"
10166"    --password=newpassword\n"
10167"    -p newpassword\n"
10168"        Use the supplied plain text password `newpassword' as the new "
10169"password\n"
10170"        for any lists that are being changed (as specified by the -a, -d, "
10171"and\n"
10172"        -l options).  If not given, lists will be assigned a randomly\n"
10173"        generated new password.\n"
10174"\n"
10175"    --quiet / -q\n"
10176"        Don't notify list owners of the new password.  You'll have to have\n"
10177"        some other way of letting the list owners know the new password\n"
10178"        (presumably out-of-band).\n"
10179"\n"
10180"    --help / -h\n"
10181"        Print this help message and exit.\n"
10182msgstr ""
10183"������ ��� ������� ��������� ��� ������.\n"
10184"\n"
10185"���� ��� Mailman 2.1, �� ������� ��� ������ ���������� �� ��������������� "
10186"����� -- �������.\n"
10187"������� ������������� ��� Python ��� ����� ��������� ��� crypt ������� "
10188"(module) , ����\n"
10189"���������� ��� md5.  ���� ������� � ����������� ��� Python  ���� ������ �� "
10190"crypt\n"
10191"module ��� ���� �� ������� ��� ������ �� ��������������.\n"
10192"\n"
10193"���� Mailman 2.1, ���� �� ������� ��� ������ ��� ��� site ����� "
10194"������������� ���� �� SHA1 hexdigest\n"
10195"�����. ���� �� ����������� ���� �������� ��� ������ ��� ���� ��� ���������� "
10196"���-Mailman 2.1 ������, ���\n"
10197"��������� ��� ������� �� ������� ��������� ��� ������������� ���������� ��� "
10198"����� �������, ��� ������� \n"
10199"�� ���������� ��� �� ����������.\n"
10200"\n"
10201"����, ���� �� script ������� ����� �������� ��� ��� �����, ��� �� ������� "
10202"����������� �� ����� ���� ���������� ��� ������.\n"
10203"\n"
10204"�����: change_pw [options]\n"
10205"\n"
10206"��������:\n"
10207"\n"
10208"    --all / -a\n"
10209"        ������� ��� ������ �� ���� ��� ������.\n"
10210"\n"
10211"    --domain=domain\n"
10212"    -d domain\n"
10213"        ������� ��� ������ �� ���� ��� ������ �� ��� �������� ������� "
10214"`domain'. �����\n"
10215"        ����� �� ������� ��������� -d ��������.\n"
10216"\n"
10217"    --listname=listname\n"
10218"    -l listname\n"
10219"        ������� ��� ������ ���� ��� ��� ���������� �����.  ����� ����� �� "
10220"������� \n"
10221"        ��������� -l ��������.\n"
10222"\n"
10223"    --password=newpassword\n"
10224"    -p newpassword\n"
10225"        �������������� ��� ���������� ���� ������ ��������� `newpassword' "
10226"��� ��� ������\n"
10227"        ��� ���� ����� � ����� ���� ������� (���� �������������� ��� ��� -a, "
10228"-d, ���\n"
10229"        -l ��������).  �� ��� �������, �� ������ �� ������� ��� ������\n"
10230"        ��������� ��� ������ ��������.\n"
10231"\n"
10232"    --quiet / -q\n"
10233"        ��� ��������� ���� ���������� ��� ������ ��� �� ��� ������ "
10234"���������.  �� ������ �� �����\n"
10235"        ������� ���� ����� �� ������������� ����� ���������� ��� ������ �� "
10236"��� ������ ���������\n"
10237"        (presumably out-of-band).\n"
10238"\n"
10239"    --help / -h\n"
10240"        ��������� �� ��������� ������ ��� ���������.\n"
10241
10242#: bin/change_pw:145
10243msgid "Bad arguments: %(strargs)s"
10244msgstr "��������� ��������: %(strargs)s"
10245
10246#: bin/change_pw:149
10247msgid "Empty list passwords are not allowed"
10248msgstr "��� ����������� ���� ����� ������� ���������"
10249
10250#: bin/change_pw:181
10251msgid "New %(listname)s password: %(notifypassword)s"
10252msgstr "���� %(listname)s ������� ���������: %(notifypassword)s"
10253
10254#: bin/change_pw:190
10255msgid "Your new %(listname)s list password"
10256msgstr "� ������� ��������� ��� ���� ��� ������ %(listname)s "
10257
10258#: bin/change_pw:191
10259msgid ""
10260"The site administrator at %(hostname)s has changed the password for your\n"
10261"mailing list %(listname)s.  It is now\n"
10262"\n"
10263"    %(notifypassword)s\n"
10264"\n"
10265"Please be sure to use this for all future list administration.  You may "
10266"want\n"
10267"to log in now to your list and change the password to something more to "
10268"your\n"
10269"liking.  Visit your list admin page at\n"
10270"\n"
10271"    %(adminurl)s\n"
10272msgstr ""
10273"� ������������ ��� ��������� ����� ���� %(hostname)s ���� ������� ��� ������ "
10274"��������� ��� ���\n"
10275"����� ������������ ������������ ��� %(listname)s.  ����� ����� �����\n"
10276"\n"
10277"    %(notifypassword)s\n"
10278"\n"
10279"��������  �� �������������� ����� ��� ����  ���������� ���������� ��� "
10280"������.  ������ �� ������\n"
10281"�� ���������� ���� ����� ��� ��� �� ������� ��� ������ ��������� �� ���� "
10282"���������� ��� \n"
10283"���������� ���.  ������������ ��� ������ ����������� ��� ������ ��� ��� "
10284"��������� \n"
10285"\n"
10286"    %(adminurl)s\n"
10287
10288#: bin/check_db:19
10289msgid ""
10290"Check a list's config database file for integrity.\n"
10291"\n"
10292"All of the following files are checked:\n"
10293"\n"
10294"    config.pck\n"
10295"    config.pck.last\n"
10296"    config.db\n"
10297"    config.db.last\n"
10298"    config.safety\n"
10299"\n"
10300"It's okay if any of these are missing.  config.pck and config.pck.last are\n"
10301"pickled versions of the config database file for 2.1a3 and beyond.  config."
10302"db\n"
10303"and config.db.last are used in all earlier versions, and these are Python\n"
10304"marshals.  config.safety is a pickle written by 2.1a3 and beyond when the\n"
10305"primary config.pck file could not be read.\n"
10306"\n"
10307"Usage: %(PROGRAM)s [options] [listname [listname ...]]\n"
10308"\n"
10309"Options:\n"
10310"\n"
10311"    --all / -a\n"
10312"        Check the databases for all lists.  Otherwise only the lists named "
10313"on\n"
10314"        the command line are checked.\n"
10315"\n"
10316"    --verbose / -v\n"
10317"        Verbose output.  The state of every tested file is printed.\n"
10318"        Otherwise only corrupt files are displayed.\n"
10319"\n"
10320"    --help / -h\n"
10321"        Print this text and exit.\n"
10322msgstr ""
10323"������� ��� ��������������� ��� ������� ��� ����� ��������� ���� ������ �� "
10324"���� ��� ����������� ���.\n"
10325"\n"
10326"��� �� �������� ������ ����������:\n"
10327"\n"
10328"    config.pck\n"
10329"    config.pck.last\n"
10330"    config.db\n"
10331"    config.db.last\n"
10332"    config.safety\n"
10333"\n"
10334"����� ������� �� ������ ��� ����� ������. �� config.pck ��� config.pck.last "
10335"�����\n"
10336"������ �������� ��� ���������������� ��� ������� ��� ����� ��������� ��� �� "
10337"2.1a3 ��� ����. ��  config.db\n"
10338"��� config.db.last ���������������� �� ���� ��� ������������ ��������, ��� "
10339"����� ����� Python\n"
10340"marshals. �� config.safety ������ ����� ������ �������� ��  2.1a3 ��� ���� "
10341"���� ��\n"
10342"primary config.pck ������ ��� ������ �� ���������.\n"
10343"\n"
10344"�����: %(PROGRAM)s [options] [listname [listname ...]]\n"
10345"\n"
10346"��������:\n"
10347"\n"
10348"    --all / -a\n"
10349"        ������� ��� ������ ��������� ��� ���� ��� ������.  ����������� ���� "
10350"�� ����������� ������ ����\n"
10351"        ������ ������� �����������.\n"
10352"\n"
10353"    --verbose / -v\n"
10354"        ������ ��������.  � ��������� ���� ��������� ������� �����������.\n"
10355"        ����������� ���� �� ���������� ������ ��������������.\n"
10356"\n"
10357"    --help / -h\n"
10358"        ��������� �� ��������� ������ ��� ���������.\n"
10359
10360#: bin/check_db:119
10361msgid "No list named:"
10362msgstr "��� ������� ����� �� �����:"
10363
10364#: bin/check_db:128
10365msgid "List:"
10366msgstr "�����:"
10367
10368#: bin/check_db:148
10369msgid "   %(file)s: okay"
10370msgstr "   %(file)s: ����� �������"
10371
10372#: bin/check_perms:20
10373msgid ""
10374"Check the permissions for the Mailman installation.\n"
10375"\n"
10376"Usage: %(PROGRAM)s [-f] [-v] [-h]\n"
10377"\n"
10378"With no arguments, just check and report all the files that have bogus\n"
10379"permissions or group ownership.  With -f (and run as root), fix all the\n"
10380"permission problems found.  With -v be verbose.\n"
10381msgstr ""
10382"������� �� ���������� (permissions) ��� ��� ����������� ��� Mailman.\n"
10383"\n"
10384"�����: %(PROGRAM)s [-f] [-v] [-h]\n"
10385"\n"
10386"����� �� ��������, ������� ������� ��� �������� ��� �� ������ ��� ����� "
10387"����������\n"
10388"���������� �  or ���������� ������.  �� �� -f (��� �� ��������� ��� root), "
10389"��������� ��� ��\n"
10390"���������� �� �� ���������� ��� ��������.  �� �� -v ������� "
10391"����������(verbose).\n"
10392"\n"
10393
10394#: bin/check_perms:110
10395msgid "    checking gid and mode for %(path)s"
10396msgstr "    ������� gid ��� mode ��� %(path)s"
10397
10398#: bin/check_perms:122
10399msgid "%(path)s bad group (has: %(groupname)s, expected %(MAILMAN_GROUP)s)"
10400msgstr ""
10401"%(path)s ����� group (has: %(groupname)s, ����������  %(MAILMAN_GROUP)s)"
10402
10403#: bin/check_perms:151
10404msgid "directory permissions must be %(octperms)s: %(path)s"
10405msgstr "�� ���������� ��� ��������� ������ �� ����� %(octperms)s: %(path)s"
10406
10407#: bin/check_perms:160
10408msgid "source perms must be %(octperms)s: %(path)s"
10409msgstr ""
10410"�� ���������� ��� ����� (source) ������ �� ����� %(octperms)s: %(path)s"
10411
10412#: bin/check_perms:171
10413msgid "article db files must be %(octperms)s: %(path)s"
10414msgstr "�� ������ db ������ ������ �� ����� %(octperms)s: %(path)s"
10415
10416#: bin/check_perms:183
10417msgid "checking mode for %(prefix)s"
10418msgstr "������� ��� ������ ��� %(prefix)s"
10419
10420#: bin/check_perms:193
10421msgid "WARNING: directory does not exist: %(d)s"
10422msgstr "�������������: � ��������� ��� �������: %(d)s"
10423
10424#: bin/check_perms:197
10425msgid "directory must be at least 02775: %(d)s"
10426msgstr "� ��������� ������ �� ���� ����������� 02775: %(d)s"
10427
10428#: bin/check_perms:209
10429msgid "checking perms on %(private)s"
10430msgstr "������� ����������� ��� %(private)s"
10431
10432#: bin/check_perms:214
10433msgid "%(private)s must not be other-readable"
10434msgstr "%(private)s ��� ������ �� ����� other-readable"
10435
10436#: bin/check_perms:223
10437msgid ""
10438"Warning: Private archive directory is other-executable (o+x).\n"
10439"         This could allow other users on your system to read private "
10440"archives.\n"
10441"         If you're on a shared multiuser system, you should consult the\n"
10442"         installation manual on how to fix this."
10443msgstr ""
10444"�������������: � ��������� ��������� ������� ����� other-executable (o+x).\n"
10445"         ���� �� �������� �� ��������� �� ������ ������� ��� ���������� �� "
10446"��������� �� �������� ��� �������� ������.\n"
10447"         �� ��������� �� ��� �����, ������ ������� �������, ������ �� "
10448"�������������� ��\n"
10449"         ���������� ������������ ��� �� ��� �� ���������� ����."
10450
10451#: bin/check_perms:240
10452msgid "mbox file must be at least 0660:"
10453msgstr "�� ������ mbox ������ �� ����� ����������� 0660:"
10454
10455#: bin/check_perms:263
10456msgid "%(dbdir)s \"other\" perms must be 000"
10457msgstr "%(dbdir)s \"others\" perms ������ �� ����� 000"
10458
10459#: bin/check_perms:273
10460msgid "checking cgi-bin permissions"
10461msgstr "������� ��� cgi-bin permissions"
10462
10463#: bin/check_perms:278
10464msgid "    checking set-gid for %(path)s"
10465msgstr "������� set-gid ��� %(path)s"
10466
10467#: bin/check_perms:282
10468msgid "%(path)s must be set-gid"
10469msgstr "%(path)s ������ �� ����� set-gid"
10470
10471#: bin/check_perms:292
10472msgid "checking set-gid for %(wrapper)s"
10473msgstr "������� set-gid ��� %(wrapper)s"
10474
10475#: bin/check_perms:296
10476msgid "%(wrapper)s must be set-gid"
10477msgstr "%(wrapper)s ������ �� ����� set-gid"
10478
10479#: bin/check_perms:306
10480msgid "checking permissions on %(pwfile)s"
10481msgstr "������� ��� permissions %(pwfile)s"
10482
10483#: bin/check_perms:315
10484msgid "%(pwfile)s permissions must be exactly 0640 (got %(octmode)s)"
10485msgstr ""
10486"%(pwfile)s �� permissions ������ �� ����� ������� 0640 (got %(octmode)s)"
10487
10488#: bin/check_perms:340
10489msgid "checking permissions on list data"
10490msgstr "������� ��� permissions ��� �������� ���������"
10491
10492#: bin/check_perms:348
10493msgid "    checking permissions on: %(path)s"
10494msgstr "\t������� ��� permissions ���: %(path)s"
10495
10496#: bin/check_perms:356
10497msgid "file permissions must be at least 660: %(path)s"
10498msgstr "�� permissions ��� ������� ������ �� ����� ����������� 660: %(path)s"
10499
10500#: bin/check_perms:401
10501msgid "No problems found"
10502msgstr "��� ����������� ������ ��������"
10503
10504#: bin/check_perms:403
10505msgid "Problems found:"
10506msgstr "������������ ����������"
10507
10508#: bin/check_perms:404
10509msgid "Re-run as %(MAILMAN_USER)s (or root) with -f flag to fix"
10510msgstr ""
10511"����-��������� �� %(MAILMAN_USER)s (� root) �� ��� ��������� -f ��� �� �� "
10512"�������������"
10513
10514#: bin/cleanarch:20
10515msgid ""
10516"Clean up an .mbox archive file.\n"
10517"\n"
10518"The archiver looks for Unix-From lines separating messages in an mbox "
10519"archive\n"
10520"file.  For compatibility, it specifically looks for lines that start with\n"
10521"\"From \" -- i.e. the letters capital-F, lowercase-r, o, m, space, ignoring\n"
10522"everything else on the line.\n"
10523"\n"
10524"Normally, any lines that start \"From \" in the body of a message should be\n"
10525"escaped such that a > character is actually the first on a line.  It is\n"
10526"possible though that body lines are not actually escaped.  This script\n"
10527"attempts to fix these by doing a stricter test of the Unix-From lines.  Any\n"
10528"lines that start \"From \" but do not pass this stricter test are escaped "
10529"with a\n"
10530"> character.\n"
10531"\n"
10532"Usage: cleanarch [options] < inputfile > outputfile\n"
10533"Options:\n"
10534"    -s n\n"
10535"    --status=n\n"
10536"        Print a # character every n lines processed\n"
10537"\n"
10538"    -q / --quiet\n"
10539"        Don't print changed line information to standard error.\n"
10540"\n"
10541"    -n / --dry-run\n"
10542"        Don't actually output anything.\n"
10543"\n"
10544"    -h / --help\n"
10545"        Print this message and exit\n"
10546msgstr ""
10547"��������� ��� �������� .mbox ������.\n"
10548"\n"
10549"�� ��������� ����������� ��������� ������� ������ ��� Unix-��� ��� ������� "
10550"��� �������� �� �������� �� ��� mbox ��������\n"
10551"������.  ��� �� �����������, ������ ������������ ��� ������� ��� �������� "
10552"��\n"
10553"\"From \" -- �.�. �������� ��������-�, ����-�, o, �, ����, ���������\n"
10554"��� �� ���� ��� ������.\n"
10555"\n"
10556"��������, ������������ ������� ��� �������� �� \"From \" ��� ���� ��� "
10557"��������� ������ ��\n"
10558"���������� ���� ���� ���� > ���������� �� ����� ���������� � ������ �� ��� "
10559"������.  �����\n"
10560"������ �� ��� ��� ������� ������� ��� �������� ��� ���������� ����������.  "
10561"���� �� script\n"
10562"��������� �� �� ��������� ���� �������� ��� ����������� ������  Unix-��� ��� "
10563"�������.  ������\n"
10564"������� �������� �� \"From \" ���� ��� ������� ���� ��� ����������� ������ "
10565"��������� �� ���\n"
10566"> ���������.\n"
10567"\n"
10568"�����: cleanarch [options] < inputfile > outputfile\n"
10569"��������:\n"
10570"    -s n\n"
10571"    --status=n\n"
10572"        ������� ��� ��������� # ��� ���� n �������������� �������\n"
10573"\n"
10574"    -q / --quiet\n"
10575"        ���� ������� ��� ���������� ����������� ������� ��� ������������ "
10576"�����.\n"
10577"\n"
10578"    -n / --dry-run\n"
10579"        ��� ������� ���� �������������� ������.\n"
10580"\n"
10581"    -h / --help\n"
10582"        ��������� �� ������ ��� ���������\n"
10583
10584#: bin/cleanarch:83
10585msgid "Unix-From line changed: %(lineno)d"
10586msgstr "Unix-��� �� ������ ��� ��������: %(lineno)d"
10587
10588#: bin/cleanarch:111
10589msgid "Bad status number: %(arg)s"
10590msgstr "����� ������� �����: %(arg)s"
10591
10592#: bin/cleanarch:167
10593msgid "%(messages)d messages found"
10594msgstr "%(messages)d �������� ��������"
10595
10596#: bin/clone_member:19
10597msgid ""
10598"Clone a member address.\n"
10599"\n"
10600"Cloning a member address means that a new member will be added who has all "
10601"the\n"
10602"same options and passwords as the original member address.  Note that this\n"
10603"operation is fairly trusting of the user who runs it -- it does no\n"
10604"verification to the new address, it does not send out a welcome message, "
10605"etc.\n"
10606"\n"
10607"The existing member's subscription is usually not modified in any way.  If "
10608"you\n"
10609"want to remove the old address, use the -r flag.  If you also want to "
10610"change\n"
10611"any list admin addresses, use the -a flag.\n"
10612"\n"
10613"Usage:\n"
10614"    clone_member [options] fromoldaddr tonewaddr\n"
10615"\n"
10616"Where:\n"
10617"\n"
10618"    --listname=listname\n"
10619"    -l listname\n"
10620"        Check and modify only the named mailing lists.  If -l is not given,\n"
10621"        then all mailing lists are scanned from the address.  Multiple -l\n"
10622"        options can be supplied.\n"
10623"\n"
10624"    --remove\n"
10625"    -r\n"
10626"        Remove the old address from the mailing list after it's been "
10627"cloned.\n"
10628"\n"
10629"    --admin\n"
10630"    -a\n"
10631"        Scan the list admin addresses for the old address, and clone or "
10632"change\n"
10633"        them too.\n"
10634"\n"
10635"    --quiet\n"
10636"    -q\n"
10637"        Do the modifications quietly.\n"
10638"\n"
10639"    --nomodify\n"
10640"    -n\n"
10641"        Print what would be done, but don't actually do it.  Inhibits the\n"
10642"        --quiet flag.\n"
10643"\n"
10644"    --help\n"
10645"    -h\n"
10646"        Print this help message and exit.\n"
10647"\n"
10648" fromoldaddr (`from old address') is the old address of the user.  "
10649"tonewaddr\n"
10650" (`to new address') is the new address of the user.\n"
10651"\n"
10652msgstr ""
10653"������������ ��� ��������� ������.\n"
10654"\n"
10655"����������� ��� ��������� ������ �������� ��� ��� ��� ����� �� ������ �� "
10656"��������� �� ����� �� ���� ���� ���\n"
10657"����� �������� ��� �������� ���� � ������ ��������� ������. ��������� ��� "
10658"���� �\n"
10659"���������� ����� ������ ������������ �� ���� ��� ������ ��� ��� ������ -- "
10660"���� ���\n"
10661"������������ ���� ��� ���������, ��� ������� ��� ������ ��������������, "
10662"���.\n"
10663"\n"
10664"� ��������� �������� ��� ������ ������� ��� ������������� ��� ����� �����. "
10665"�� \n"
10666"�������� �� ���������� ��� ����� ��� ���������, �������������� ��� ��������� "
10667"-r. �� ������ �������� �� ��������\n"
10668"������������ ����������� admin ��� ������, �������������� ��� ��������� -a.\n"
10669"\n"
10670"�����:\n"
10671"    clone_member [options] fromoldaddr tonewaddr\n"
10672"\n"
10673"���:\n"
10674"\n"
10675"    --listname=����� ������\n"
10676"    -l ����� ������\n"
10677"        ������� ��� ���������� ���� ��� ����������� ������. �� �� -l ��� "
10678"�������,\n"
10679"        ���� ���� �� ������ ���������� ��� ��� ���������.  ��������� "
10680"�������� -l\n"
10681"        ������� �� ���������.\n"
10682"\n"
10683"    --��������\n"
10684"    -r\n"
10685"        ��������� ��� ����� ��������� ��� ��� ����� ���� ���� ������������.\n"
10686"\n"
10687"    --����������\n"
10688"    -a\n"
10689"        ������� ��� ����������� ��� ����������� ��� ������ ��� ����� "
10690"���������, ��� ������������ � �������\n"
10691"        ��� ������.\n"
10692"\n"
10693"    --quiet\n"
10694"    -q\n"
10695"        ����� ��� ������������� �� ������ (quietly).\n"
10696"\n"
10697"    --�� �����������\n"
10698"    -n\n"
10699"        ��������� �� �� �������, ���� ��� �� ����� ����������.  ��������� "
10700"(Inhibits) ���\n"
10701"        --����� (quiet) ������.\n"
10702"\n"
10703"    --�������\n"
10704"    -h\n"
10705"        ��������� �� ��������� ������ ��� ���������.\n"
10706"\n"
10707" fromoldaddr (`��� ��� ����� ���������') ����� � ����� ��������� ��� "
10708"������.\n"
10709"tonewaddr\n"
10710" (`��� ��� ��� ���������') ����� � ��� ��������� ��� ������.\n"
10711"\n"
10712
10713#: bin/clone_member:94
10714msgid "processing mailing list:"
10715msgstr "����������� ��� mailing ������:"
10716
10717#: bin/clone_member:101
10718msgid "    scanning list owners:"
10719msgstr "    ��������� ��� ���������� ��� ������:"
10720
10721#: bin/clone_member:119
10722msgid "    new list owners:"
10723msgstr "    ���� ���������� ��� ������:"
10724
10725#: bin/clone_member:121
10726msgid "(no change)"
10727msgstr "(����� ������)"
10728
10729#: bin/clone_member:130
10730msgid "    address not found:"
10731msgstr "   ��� ������� ���������:"
10732
10733#: bin/clone_member:145
10734msgid "    clone address added:"
10735msgstr "    ���������� ������������� ���������:"
10736
10737#: bin/clone_member:148
10738msgid "    clone address is already a member:"
10739msgstr "    � ������������� ��������� ����� ��� �����:"
10740
10741#: bin/clone_member:151
10742msgid "    original address removed:"
10743msgstr "    � ������ ��������� ����������:"
10744
10745#: bin/clone_member:202
10746msgid "Not a valid email address: %(toaddr)s"
10747msgstr "�� ������ email ���������: %(toaddr)s"
10748
10749#: bin/clone_member:215
10750msgid ""
10751"Error opening list \"%(listname)s\", skipping.\n"
10752"%(e)s"
10753msgstr ""
10754"����� ��� ������� ��� ������ \"%(listname)s\", �������������.\n"
10755"%(e)s"
10756
10757#: bin/config_list:20
10758msgid ""
10759"Configure a list from a text file description.\n"
10760"\n"
10761"Usage: config_list [options] listname\n"
10762"\n"
10763"Options:\n"
10764"    --inputfile filename\n"
10765"    -i filename\n"
10766"        Configure the list by assigning each module-global variable in the\n"
10767"        file to an attribute on the list object, then saving the list.  The\n"
10768"        named file is loaded with execfile() and must be legal Python code.\n"
10769"        Any variable that isn't already an attribute of the list object is\n"
10770"        ignored (a warning message is printed).  See also the -c option.\n"
10771"\n"
10772"        A special variable named `mlist' is put into the globals during the\n"
10773"        execfile, which is bound to the actual MailList object.  This lets "
10774"you\n"
10775"        do all manner of bizarre thing to the list object, but BEWARE!  "
10776"Using\n"
10777"        this can severely (and possibly irreparably) damage your mailing "
10778"list!\n"
10779"\n"
10780"    --outputfile filename\n"
10781"    -o filename\n"
10782"        Instead of configuring the list, print out a list's configuration\n"
10783"        variables in a format suitable for input using this script.  In "
10784"this\n"
10785"        way, you can easily capture the configuration settings for a\n"
10786"        particular list and imprint those settings on another list.  "
10787"filename\n"
10788"        is the file to output the settings to.  If filename is `-', "
10789"standard\n"
10790"        out is used.\n"
10791"\n"
10792"    --checkonly\n"
10793"    -c\n"
10794"        With this option, the modified list is not actually changed.  Only\n"
10795"        useful with -i.\n"
10796"\n"
10797"    --verbose\n"
10798"    -v\n"
10799"        Print the name of each attribute as it is being changed.  Only "
10800"useful\n"
10801"        with -i.\n"
10802"\n"
10803"    --help\n"
10804"    -h\n"
10805"        Print this help message and exit.\n"
10806"\n"
10807"The options -o and -i are mutually exclusive.\n"
10808"\n"
10809msgstr ""
10810"����������� ��� ����� ��� ��� ��������� ������� ��������.\n"
10811"\n"
10812"�����: config_list [options] ����� ������\n"
10813"\n"
10814"��������:\n"
10815"    --inputfile ����� �������\n"
10816"    -i ����� �������\n"
10817"        ����������� ��  ����� �� ��� ��������� ���� ��������� �� ������� "
10818"����������\n"
10819"        ��� ������ �� ��� �������� ��� ����������� ��� ������, ������������� "
10820"������ ��� �����. ��\n"
10821"        �����������  ������ ���������� �� execfile () ��� ������ �� ����� "
10822"������� ������� Python.\n"
10823"        ����������� ��������� ��� ��� ����� ��� ��� �������� ��� "
10824"������������ ��� ������ \n"
10825"        ��������� (��� ������ �������������� ���������).  ����� ������ ��� "
10826"������� -c.\n"
10827"\n"
10828"        ��� ������ ��������� �� ��� �������� `mlist' ������� ��� globals "
10829"���� �� �������� ���\n"
10830"        execfile, � ����� ����� ����������� ��� ���������� �����������  ��� "
10831"������. ����  ��������� \n"
10832"\n"
10833"        ���������� ��� ��� ������ ��� ��������� ��������� ��� ����������� "
10834"��� ������, ���� �������!\n"
10835"���������������\n"
10836"        ��� ������ ������ (��� ����������� ���������) �� ������������ ��� "
10837"����� ���!\n"
10838"\n"
10839"    --outputfile filename\n"
10840"    -o filename\n"
10841"        ���� ��� ���������������� ��� ������, ��������� ��� ���������� "
10842"����������� ��� ������\n"
10843"        �� ��� ����� ��������� ��� ��� �������� ��������������� ���� �� "
10844"script. �� �����\n"
10845"        ��� �����, �������� ������ �� ���������� ��� ��������� ��� "
10846"����������������  ��� ���\n"
10847"        ��������� ����� ��� �� ��� ����������� �� ��� ���� �����. �� ����� "
10848"�������\n"
10849"        ����� �� ������ ��� ����� �� ������������� �� ���������. �� �� ����� "
10850"������� ����� `-', ��������������\n"
10851"        � standard �������.\n"
10852"\n"
10853"    --checkonly\n"
10854"    -c\n"
10855"        �� ���� ��� �������, � �������������� ����� ���� �������������� ��� "
10856"�������.  ������� ���� \n"
10857"          �� -i.\n"
10858"\n"
10859"    --verbose\n"
10860"    -v\n"
10861"        ������� �� ����� ���� �������� ��������� ��� �� ���� ��������.  "
10862"������� ����\n"
10863"        �� -i.\n"
10864"\n"
10865"    --help\n"
10866"    -h\n"
10867"        ��������� �� ��������� ������ ��� ���������.\n"
10868"\n"
10869"�� �������� -o ��� -i ����� �������� �������������.\n"
10870"\n"
10871
10872#: bin/config_list:118
10873msgid ""
10874"# -*- python -*-\n"
10875"# -*- coding: %(charset)s -*-\n"
10876"## \"%(listname)s\" mailing list configuration settings\n"
10877"## captured on %(when)s\n"
10878msgstr ""
10879"# -*- python -*-\n"
10880"# -*- coding: %(charset)s -*-\n"
10881"##  ��������� ����������� ��� ������ ������������� \"%(listname)s\"\n"
10882"## captured on %(when)s\n"
10883
10884#: bin/config_list:144
10885msgid "options"
10886msgstr "��������"
10887
10888#: bin/config_list:203
10889msgid "legal values are:"
10890msgstr "���������� ����� �����:"
10891
10892#: bin/config_list:270
10893msgid "attribute \"%(k)s\" ignored"
10894msgstr "� ���������� \"%(k)s\" ���������"
10895
10896#: bin/config_list:273
10897msgid "attribute \"%(k)s\" changed"
10898msgstr "� ���������� \"%(k)s\" ������"
10899
10900#: bin/config_list:279
10901msgid "Non-standard property restored: %(k)s"
10902msgstr "�� �������� �������� ������������: %(k)s"
10903
10904#: bin/config_list:288
10905msgid "Invalid value for property: %(k)s"
10906msgstr "����� ���� ��� ��� ��������: %(k)s"
10907
10908#: bin/config_list:291
10909msgid "Bad email address for option %(k)s: %(v)s"
10910msgstr "���� email ��������� ��� ��� ������� %(k)s: %(v)s"
10911
10912#: bin/config_list:348
10913msgid "Only one of -i or -o is allowed"
10914msgstr "���� ��� ��� ��� �������� -i � -o ������������"
10915
10916#: bin/config_list:350
10917msgid "One of -i or -o is required"
10918msgstr "���� ��� ��� ��� ���������� -i � -o �����������"
10919
10920#: bin/config_list:354
10921msgid "List name is required"
10922msgstr "���������� �� ����� ��� ������."
10923
10924#: bin/convert.py:19
10925msgid ""
10926"Convert a list's interpolation strings from %-strings to $-strings.\n"
10927"\n"
10928"This script is intended to be run as a bin/withlist script, i.e.\n"
10929"\n"
10930"% bin/withlist -l -r convert <mylist>\n"
10931msgstr ""
10932"���������� ���� ���������� ���������� ��� ������ ��� ���������� % �� "
10933"���������� $.\n"
10934"\n"
10935"���� �� script �������� �� ������ ��� script bin/withlist , �.�.\n"
10936"\n"
10937"% bin/withlist -l -r convert <mylist>\n"
10938
10939#: bin/convert.py:38 bin/fix_url.py:90
10940msgid "Saving list"
10941msgstr "� ����� ������������"
10942
10943#: bin/convert.py:44 bin/fix_url.py:51 bin/reset_pw.py:57
10944msgid "%%%"
10945msgstr "%%%"
10946
10947#: bin/discard:19
10948msgid ""
10949"Discard held messages.\n"
10950"\n"
10951"Usage:\n"
10952"    discard [options] file ...\n"
10953"\n"
10954"Options:\n"
10955"    --help / -h\n"
10956"        Print this help message and exit.\n"
10957"\n"
10958"    --quiet / -q\n"
10959"        Don't print status messages.\n"
10960msgstr ""
10961"���������� ����� ��������� �� ��������� ��������.\n"
10962"\n"
10963"�����:\n"
10964"    discard [options] ����� ������� ...\n"
10965"\n"
10966"��������:\n"
10967"    --help / -h\n"
10968"        ��������� �� ��������� ������ ��� ���������.\n"
10969"\n"
10970"    --quiet / -q\n"
10971"        ����� �������� ��������� ����������.\n"
10972
10973#: bin/discard:94
10974msgid "Ignoring non-held message: %(f)s"
10975msgstr "�������� �� ��-��������� ������: %(f)s"
10976
10977#: bin/discard:100
10978msgid "Ignoring held msg w/bad id: %(f)s"
10979msgstr "�������� �� ��������� ������ �� �� ���� ��������������: %(f)s"
10980
10981#: bin/discard:112
10982msgid "Discarded held msg #%(id)s for list %(listname)s"
10983msgstr ""
10984"����������� ����� ��������� �� ��������� ������ #%(id)s ��� ��� ����� "
10985"%(listname)s"
10986
10987#: bin/dumpdb:19
10988msgid ""
10989"Dump the contents of any Mailman `database' file.\n"
10990"\n"
10991"Usage: %(PROGRAM)s [options] filename\n"
10992"\n"
10993"Options:\n"
10994"\n"
10995"    --marshal/-m\n"
10996"        Assume the file contains a Python marshal, overridding any "
10997"automatic\n"
10998"        guessing.\n"
10999"\n"
11000"    --pickle/-p\n"
11001"        Assume the file contains a Python pickle, overridding any automatic\n"
11002"        guessing.\n"
11003"\n"
11004"    --noprint/-n\n"
11005"        Don't attempt to pretty print the object.  This is useful if "
11006"there's\n"
11007"        some problem with the object and you just want to get an unpickled\n"
11008"        representation.  Useful with `python -i bin/dumpdb <file>'.  In "
11009"that\n"
11010"        case, the root of the tree will be left in a global called \"msg\".\n"
11011"\n"
11012"    --help/-h\n"
11013"        Print this help message and exit\n"
11014"\n"
11015"If the filename ends with `.db', then it is assumed that the file contains "
11016"a\n"
11017"Python marshal.  If the file ends with `.pck' then it is assumed to contain "
11018"a\n"
11019"Python pickle.  In either case, if you want to override the default "
11020"assumption\n"
11021"-- or if the file ends in neither suffix -- use the -p or -m flags.\n"
11022msgstr ""
11023"���������� ���  ����������� ������������ ������� ������ ���������' ��� "
11024"Mailman.\n"
11025"\n"
11026"�����: %(PROGRAM)s [options] ����� �������\n"
11027"\n"
11028"��������:\n"
11029"\n"
11030"    --marshal/-m\n"
11031"        ���������� ��� �� ������ �������� ��� Python marshal, "
11032"��������������� ���� �������� �������.\n"
11033"\n"
11034"    --pickle/-p\n"
11035"        ���������� ��� �� ������ �������� ��� Python pickle, ��������������� "
11036"���� �������� �������.\n"
11037"\n"
11038"    --noprint/-n\n"
11039"        ��� ������� �� �����������.  ���� ����� ������� �� ��������\n"
11040"        ������ ���������� �� �� ����������� ��� ������ �� ������ ��� \n"
11041"        ��������������.  ������� �� `python -i bin/dumpdb <������>'.  �� "
11042"����\n"
11043"        ��� ���������, � root ������� �� ������ �� ���� �������� "
11044"������������ \"msg\".\n"
11045"\n"
11046"    --help/-h\n"
11047"        ��������� �� ��������� ������ ��� ���������.\n"
11048"\n"
11049"�� �� ����� ������� ��������� �� `.db', ���������� ��� �� ������ �������� "
11050"���\n"
11051"Python marshal. �� �� ������ ��������� �� `.pck' ���������� ��� �������� "
11052"���\n"
11053"Python pickle.  �� ���� ���������, �� �������� �� ������������ ��� "
11054"������������� �������\n"
11055"-- � �� �� ������ ��������� �� ������ ������� -- ������������� ���  "
11056"��������� -p � ��� -m.\n"
11057
11058#: bin/dumpdb:105
11059msgid "No filename given."
11060msgstr "��� ������ ������ ����� �������."
11061
11062#: bin/dumpdb:108
11063msgid "Bad arguments: %(pargs)s"
11064msgstr "����� ��������: %(pargs)s"
11065
11066#: bin/dumpdb:118
11067msgid "Please specify either -p or -m."
11068msgstr "�������� ������������ ���� -p � �� -m"
11069
11070#: bin/dumpdb:133
11071msgid "[----- start %(typename)s file -----]"
11072msgstr "[----- start %(typename)s file-----]"
11073
11074#: bin/dumpdb:139
11075msgid "[----- end %(typename)s file -----]"
11076msgstr "[----- end %(typename)s file -----]"
11077
11078#: bin/dumpdb:142
11079msgid "<----- start object %(cnt)s ----->"
11080msgstr "<----- start object %(cnt)s ----->"
11081
11082#: bin/export.py:20
11083msgid "Export an XML representation of a mailing list."
11084msgstr "������� ���� XML ��������������� ��� ������ ������������ ������������"
11085
11086#: bin/export.py:319
11087msgid ""
11088"%%prog [options]\n"
11089"\n"
11090"Export the configuration and members of a mailing list in XML format."
11091msgstr ""
11092"%%prog [options]\n"
11093"\n"
11094"������� ��� ����������� ��� ��� ����� ��� ������ �� ����� XML."
11095
11096#: bin/export.py:325
11097msgid ""
11098"Output XML to FILENAME.  If not given, or if FILENAME is '-', standard out "
11099"is\n"
11100"used."
11101msgstr ""
11102"������� XML ��� FILENAME.  �� ��� �������, � ��  FILENAME ����� '-', �� "
11103"�������������� � ������ ������\n"
11104"(standard output)."
11105
11106#: bin/export.py:329
11107msgid ""
11108"Specify the RFC 2307 style hashing scheme for passwords included in the\n"
11109"output.  Use -P to get a list of supported schemes, which are\n"
11110"case-insensitive."
11111msgstr ""
11112"������ ��� RFC 2307 style hashing ����� ��� ���� �������� ��������� ���\n"
11113"������������������ ���� �����.  �������������� -P ��� �� ������ ��� ����� \n"
11114"��� �� �������������� ������� �� ����� ����� ����� �������� ����� ���������."
11115
11116#: bin/export.py:334
11117msgid ""
11118"List the supported password hashing schemes and exit.  The scheme labels "
11119"are\n"
11120"case-insensitive."
11121msgstr ""
11122"��������� �� �������������� ������� hashing ������������.  �� �������� ��� "
11123"�������� \n"
11124"����� ����� �������� ����� ���������."
11125
11126#: bin/export.py:339
11127msgid ""
11128"The list to include in the output.  If not given, then all mailing lists "
11129"are\n"
11130"included in the XML output.  Multiple -l flags may be given."
11131msgstr ""
11132"� ����� ��� ��  ������������� ���� �����. ��� ��� �����, ���� ���� �� "
11133"������\n"
11134"��������������� ���� ����� XML. ������� �� ������ ��������� ������� -l."
11135
11136#: bin/export.py:345
11137msgid "Unexpected arguments"
11138msgstr "�� ����������� ������"
11139
11140#: bin/export.py:351
11141msgid "Invalid password scheme"
11142msgstr "�� ������ ����� ������� ���������:"
11143
11144#: bin/find_member:19
11145msgid ""
11146"Find all lists that a member's address is on.\n"
11147"\n"
11148"Usage:\n"
11149"    find_member [options] regex [regex [...]]\n"
11150"\n"
11151"Where:\n"
11152"    --listname=listname\n"
11153"    -l listname\n"
11154"        Include only the named list in the search.\n"
11155"\n"
11156"    --exclude=listname\n"
11157"    -x listname\n"
11158"        Exclude the named list from the search.\n"
11159"\n"
11160"    --owners\n"
11161"    -w\n"
11162"        Search list owners as well as members.\n"
11163"\n"
11164"    --help\n"
11165"    -h\n"
11166"        Print this help message and exit.\n"
11167"\n"
11168"    regex\n"
11169"        A Python regular expression to match against.\n"
11170"\n"
11171"The interaction between -l and -x is as follows.  If any -l option is given\n"
11172"then only the named list will be included in the search.  If any -x option "
11173"is\n"
11174"given but no -l option is given, then all lists will be search except those\n"
11175"specifically excluded.\n"
11176"\n"
11177"Regular expression syntax is Perl5-like, using the Python re module.  "
11178"Complete\n"
11179"specifications are at:\n"
11180"\n"
11181"https://docs.python.org/2/library/re.html\n"
11182"\n"
11183"Address matches are case-insensitive, but case-preserved addresses are\n"
11184"displayed.\n"
11185"\n"
11186msgstr ""
11187"��������� ���� ��� ������ ���� ������ ��������� � ��������� ���� ������.\n"
11188"\n"
11189"�����:\n"
11190"    find_member [options] regex [regex [...]]\n"
11191"\n"
11192"���:\n"
11193"    --listname=listname\n"
11194"    -l ����� ������\n"
11195"        ������������ ���� ��� ���������� ����� ���� ���������.\n"
11196"\n"
11197"    --exclude=listname\n"
11198"    -x ����� ������\n"
11199"        ���������� � ���������� ����� ���� ���������.\n"
11200"\n"
11201"    --owners\n"
11202"    -w\n"
11203"        ������� ���� ���������� ��� ������ ����� ��� �� ����.\n"
11204"\n"
11205"    --help\n"
11206"    -h\n"
11207"        ��������� �� ��������� ������ ��� ���������.\n"
11208"\n"
11209"    regex\n"
11210"        ��� �������� ������� Python ��� �� ��������� �������.\n"
11211"\n"
11212"� ������������� ������ -l ��� -x ����� � ��������. �� ������ ������� -l "
11213"�����\n"
11214"���� ���� � ���������� ����� �� ������������� ���� ���������.  �� ������ "
11215"������� -x \n"
11216"����� ���� ��� � ������� -l, ���� ���� �� ������ �� ��������� then all lists "
11217"will be search ����� ��� ��������\n"
11218"��� ������������ ������������.\n"
11219"\n"
11220"� �������� ������� �������� ����� ��� ������ Perl5, ��������������� �� "
11221"Module Python re.\n"
11222"�� �������\n"
11223"������������ ���������� ���:\n"
11224"\n"
11225"https://docs.python.org/2/library/re.html\n"
11226"\n"
11227"�� ������������ ����������� ����� (case-insensitive), ���� �� (case-"
11228"preserved) �����������\n"
11229"��������������.\n"
11230"\n"
11231
11232#: bin/find_member:159
11233msgid "Search regular expression required"
11234msgstr "���������� �������� ������� ����������"
11235
11236#: bin/find_member:164
11237msgid "No lists to search"
11238msgstr "����� ����� ���� ���������"
11239
11240#: bin/find_member:173
11241msgid "found in:"
11242msgstr "������� ��"
11243
11244#: bin/find_member:179
11245msgid "(as owner)"
11246msgstr "(�� ����������)"
11247
11248#: bin/fix_url.py:19
11249msgid ""
11250"Reset a list's web_page_url attribute to the default setting.\n"
11251"\n"
11252"This script is intended to be run as a bin/withlist script, i.e.\n"
11253"\n"
11254"% bin/withlist -l -r fix_url listname [options]\n"
11255"\n"
11256"Options:\n"
11257"    -u urlhost\n"
11258"    --urlhost=urlhost\n"
11259"        Look up urlhost in the virtual host table and set the web_page_url "
11260"and\n"
11261"        host_name attributes of the list to the values found.  This\n"
11262"        essentially moves the list from one virtual domain to another.\n"
11263"\n"
11264"        Without this option, the default web_page_url and host_name values "
11265"are\n"
11266"        used.\n"
11267"\n"
11268"    -v / --verbose\n"
11269"        Print what the script is doing.\n"
11270"\n"
11271"If run standalone, it prints this help text and exits.\n"
11272msgstr ""
11273"������������� ��� ���������  ��� web_page_url ���� ������ ���� "
11274"�������������.\n"
11275"\n"
11276"���� �� script ����������� �� ���������� ���� ��� bin/withlist script, �.�.\n"
11277"\n"
11278"% bin/withlist -l -r fix_url ����� ������ [��������]\n"
11279"\n"
11280"��������:\n"
11281"    -u urlhost\n"
11282"    --urlhost=urlhost\n"
11283"        ������� �� urlhost �� ��� ������ ��������� �������� (virtual "
11284"hosts)   ��� o����� �� web_page_url ���\n"
11285"        ��� ��������� ��� host_name ��� ������ ���� ����� ��� ������������.  "
11286"����\n"
11287"        ��������� ���������� ��� ����� ��� ��� �������� ������� ���� ��� "
11288"����.\n"
11289"\n"
11290"        ����� ���� ��� �������, �� �������������� ����� ��� web_page_url ��� "
11291"host_name ����������������.\n"
11292"\n"
11293"    -v / --verbose\n"
11294"        ��������� �� ����� �� ������������ script.\n"
11295"\n"
11296"�� ������ ��������, ��������� �� ������� �������� ��� ���������.\n"
11297
11298#: bin/fix_url.py:75
11299msgid "Locking list"
11300msgstr "�������� ��� ������ "
11301
11302#: bin/fix_url.py:85
11303msgid "Setting web_page_url to: %(web_page_url)s"
11304msgstr "������� ��� web_page_url ��: %(web_page_url)s"
11305
11306#: bin/fix_url.py:88
11307msgid "Setting host_name to: %(mailhost)s"
11308msgstr "������� ��� host_name ��: %(mailhost)s"
11309
11310#: bin/genaliases:19
11311msgid ""
11312"Regenerate Mailman specific aliases from scratch.\n"
11313"\n"
11314"The actual output depends on the value of the `MTA' variable in your mm_cfg."
11315"py\n"
11316"file.\n"
11317"\n"
11318"Usage: genaliases [options]\n"
11319"Options:\n"
11320"\n"
11321"    -q/--quiet\n"
11322"        Some MTA output can include more verbose help text.  Use this to "
11323"tone\n"
11324"        down the verbosity.\n"
11325"\n"
11326"    -h/--help\n"
11327"        Print this message and exit.\n"
11328msgstr ""
11329"����������� �� ������������ aliases ��� Mailman ��� ��� ����.\n"
11330"\n"
11331"� ���������� �������� ��������� ��� ��� ���� ��� ���������� `MTA' ��� mm_cfg."
11332"py\n"
11333"������ ���.\n"
11334"\n"
11335"�����: genaliases [��������]\n"
11336"��������:\n"
11337"\n"
11338"    -q/--quiet\n"
11339"        ������ ������ ��� MTA ������ �� ��������� ����������� ��������� "
11340"������� ��������. �������������� ���� ��� ��\n"
11341"      �� ���������.\n"
11342"\n"
11343"    -h/--�������\n"
11344"        ��������� �� ������ ��� ���������.\n"
11345
11346#: bin/genaliases:84
11347msgid "genaliases can't do anything useful with mm_cfg.MTA = %(mta)s."
11348msgstr ""
11349"�� genaliases ��� ������ �� ����� ���� ������� �� �� mm_cfg.MTA = %(mta)s. "
11350
11351#: bin/inject:20
11352msgid ""
11353"Inject a message from a file into Mailman's incoming queue.\n"
11354"\n"
11355"Usage: inject [options] [filename]\n"
11356"\n"
11357"Options:\n"
11358"\n"
11359"    -h / --help\n"
11360"        Print this text and exit.\n"
11361"\n"
11362"    -l listname\n"
11363"    --listname=listname\n"
11364"        The name of the list to inject this message to.  Required.\n"
11365"\n"
11366"    -q queuename\n"
11367"    --queue=queuename\n"
11368"        The name of the queue to inject the message to.  The queuename must "
11369"be\n"
11370"        one of the directories inside the qfiles directory.  If omitted, "
11371"the\n"
11372"        incoming queue is used.\n"
11373"\n"
11374"filename is the name of the plaintext message file to inject.  If omitted,\n"
11375"standard input is used.\n"
11376msgstr ""
11377"�������� (inject) ��� ������ ��� ��� ������ ���� ���� ������������ ��� "
11378"Mailman.\n"
11379"\n"
11380"�����: inject [��������] [filename]\n"
11381"\n"
11382"��������:\n"
11383"\n"
11384"    -h / --help\n"
11385"        ��������� �� ��������� ������ ��� ���������.\n"
11386"\n"
11387"    -l ����� ������\n"
11388"    --listname=listname\n"
11389"        �� ����� ��� ������ ���� ����� �� �������� (inject) �� ������.  "
11390"����������.\n"
11391"\n"
11392"    -q ����� �����\n"
11393"    --queue=queuename\n"
11394"        �� ����� ��� ����� �������� ���� ����� �� �������� (inject) �� "
11395"������. �� ����� ��� ����� �������� ������ �� �����\n"
11396"        ���� ��� ���� ���������� ���� ���� �������� qfiles.  ��� "
11397"������������, �\n"
11398"        ��������������� � ����������� ���� .\n"
11399"\n"
11400"����� ������� ����� �� ����� ���  ������� �������� �� ��  ������ ���� "
11401"���������� (inject).  ��� ������������,\n"
11402"��������������� � ������������ �������� (standard input).\n"
11403
11404#: bin/inject:84
11405msgid "Bad queue directory: %(qdir)s"
11406msgstr "����� ��������� ����� ��������: %(qdir)s"
11407
11408#: bin/inject:89
11409msgid "A list name is required"
11410msgstr "���������� �� ����� ��� ������"
11411
11412#: bin/list_admins:20
11413msgid ""
11414"List all the owners of a mailing list.\n"
11415"\n"
11416"Usage: %(program)s [options] listname ...\n"
11417"\n"
11418"Where:\n"
11419"\n"
11420"    --all-vhost=vhost\n"
11421"    -v=vhost\n"
11422"        List the owners of all the mailing lists for the given virtual "
11423"host.\n"
11424"\n"
11425"    --all\n"
11426"    -a\n"
11427"        List the owners of all the mailing lists on this system.\n"
11428"\n"
11429"    --help\n"
11430"    -h\n"
11431"        Print this help message and exit.\n"
11432"\n"
11433"`listname' is the name of the mailing list to print the owners of.  You can\n"
11434"have more than one named list on the command line.\n"
11435msgstr ""
11436"��������� ��� ����� �� ����� ���� ���������� ��� ������.\n"
11437"\n"
11438"�����: %(program)s [��������] ����� ������ ...\n"
11439"\n"
11440"����:\n"
11441"\n"
11442"    --all-vhost=vhost\n"
11443"    -v=vhost\n"
11444"        ��������� ���� �������� �� ���� ��� ������ ��� �� �������� �������� "
11445"������� (virtual host).\n"
11446"\n"
11447"    --all\n"
11448"    -a\n"
11449"        ��������� ���� �������� �� ���� ��� ������ ��� ����������.\n"
11450"\n"
11451"    --help\n"
11452"    -h\n"
11453"        ��������� �� ��������� ������ ��� ���������.\n"
11454"\n"
11455"`����� ������' ����� �� ����� ��� ������ ��� ��� ����� �� ���������� �� "
11456"����������.  ��������\n"
11457"�� ����� ������������ ��� ��� ����������� ������ ���� ������ �������.\n"
11458
11459#: bin/list_admins:97
11460msgid "List: %(listname)s, \tOwners: %(owners)s"
11461msgstr "�����: %(listname)s, \t����������: %(owners)s"
11462
11463#: bin/list_lists:19
11464#, fuzzy
11465msgid ""
11466"List all mailing lists.\n"
11467"\n"
11468"Usage: %(program)s [options]\n"
11469"\n"
11470"Where:\n"
11471"\n"
11472"    -a / --advertised\n"
11473"        List only those mailing lists that are publically advertised\n"
11474"\n"
11475"    -p / --public-archive\n"
11476"        List only those lists with public archives.\n"
11477"\n"
11478"    --virtual-host-overview=domain\n"
11479"    -V domain\n"
11480"        List only those mailing lists that are homed to the given virtual\n"
11481"        domain.  This only works if the VIRTUAL_HOST_OVERVIEW variable is\n"
11482"        set.\n"
11483"\n"
11484"    -b / --bare\n"
11485"        Displays only the list name, with no description.\n"
11486"\n"
11487"    -h / --help\n"
11488"        Print this text and exit.\n"
11489"\n"
11490msgstr ""
11491"��������� ���� �������� �� ���� ��� ������.\n"
11492"\n"
11493"�����: %(program)s [options]\n"
11494"\n"
11495"���:\n"
11496"\n"
11497"    -a / --advertised\n"
11498"        ��������� ���� �������� ���� �� ��� ������ ��� ������������� "
11499"�������\n"
11500"\n"
11501"    --virtual-host-overview=�������\n"
11502"    -V �������\n"
11503"        ��������� ���� �������� ���� �� ��� ������ ��� ������������� ��� "
11504"�������� ��������\n"
11505"        ������� (virtual domain).  ���� �������� ���� �� � ��������� "
11506"VIRTUAL_HOST_OVERVIEW ����\n"
11507"        �������.\n"
11508"\n"
11509"    -b / --bare\n"
11510"        ��������� ���� �� ����� ��� ������, ����� ��� ���������.\n"
11511"\n"
11512"    -h / --help\n"
11513"        ��������� ���� �� ��������� ������ ��� ���������.\n"
11514"\n"
11515
11516#: bin/list_lists:119
11517msgid "No matching mailing lists found"
11518msgstr "��� ������� ����� ��� �� ��������� "
11519
11520#: bin/list_lists:123
11521msgid "matching mailing lists found:"
11522msgstr "�������� ������ ��� ���������:"
11523
11524#: bin/list_members:19
11525#, fuzzy
11526msgid ""
11527"List all the members of a mailing list.\n"
11528"\n"
11529"Usage: %(PROGRAM)s [options] listname\n"
11530"\n"
11531"Where:\n"
11532"\n"
11533"    --output file\n"
11534"    -o file\n"
11535"        Write output to specified file instead of standard out.\n"
11536"\n"
11537"    --regular / -r\n"
11538"        Print just the regular (non-digest) members.\n"
11539"\n"
11540"    --digest[=kind] / -d [kind]\n"
11541"        Print just the digest members.  Optional argument can be \"mime\" "
11542"or\n"
11543"        \"plain\" which prints just the digest members receiving that kind "
11544"of\n"
11545"        digest.\n"
11546"\n"
11547"    --nomail[=why] / -n [why]\n"
11548"        Print the members that have delivery disabled.  Optional argument "
11549"can\n"
11550"        be \"byadmin\", \"byuser\", \"bybounce\", or \"unknown\" which "
11551"prints just the\n"
11552"        users who have delivery disabled for that reason.  It can also be\n"
11553"        \"enabled\" which prints just those member for whom delivery is\n"
11554"        enabled.\n"
11555"\n"
11556"    --fullnames / -f\n"
11557"        Include the full names in the output.\n"
11558"\n"
11559"    --preserve / -p\n"
11560"        Output member addresses case preserved the way they were added to "
11561"the\n"
11562"        list.  Otherwise, addresses are printed in all lowercase.\n"
11563"\n"
11564"    --moderated / -m\n"
11565"        Print just the moderated members.  Ignores -r, -d, -n.\n"
11566"\n"
11567"    --non-moderated / -M\n"
11568"        Print just the non-moderated members.  Ignores -r, -d, -n.\n"
11569"\n"
11570"    --invalid / -i\n"
11571"        Print only the addresses in the membership list that are invalid.\n"
11572"        Ignores -r, -d, -n.\n"
11573"\n"
11574"    --unicode / -u\n"
11575"        Print addresses which are stored as Unicode objects instead of "
11576"normal\n"
11577"        string objects.  Ignores -r, -d, -n.\n"
11578"\n"
11579"    --help\n"
11580"    -h\n"
11581"        Print this help message and exit.\n"
11582"\n"
11583"    listname is the name of the mailing list to use.\n"
11584"\n"
11585"Note that if neither -r or -d is supplied, regular members are printed "
11586"first,\n"
11587"followed by digest members, but no indication is given as to address "
11588"status.\n"
11589msgstr ""
11590"��������� ���� �������� �� ��� �� ���� ��� ������.\n"
11591"\n"
11592"�����: %(PROGRAM)s [��������] ����� ������\n"
11593"\n"
11594"����:\n"
11595"\n"
11596"    --output file\n"
11597"    -o ������\n"
11598"        ������ ��� ����� ��� �������� ������ ���� ���� ������������� ����� "
11599"(standard output).\n"
11600"\n"
11601"    --regular / -r\n"
11602"        ��������� ���� �� �������� (non-digest) ����.\n"
11603"\n"
11604"    --digest[=kind] / -d [kind]\n"
11605"        ��������� ���� �� digest ����.  �� ����������� ������ ������ �� "
11606"����� \"mime\" �\n"
11607"        \"plain\" �� ����� ������� ���� �� digest ���� ��� ��������� ������ "
11608"�� ����� ���\n"
11609"        digest.\n"
11610"\n"
11611"    --nomail[=why] / -n [�����]\n"
11612"        ��������� �� ���� �� ����� ����� ���������������� ��� �������.  �� "
11613"����������� ������ ������\n"
11614"        �� ����� \"byadmin\", \"byuser\", \"bybounce\", � \"unknown\" �� "
11615"����� ��������� ���� ����\n"
11616"        ������� ��� ����� ���������������� �� ������� ��� ���� ��� ����.  "
11617"������ ������ �� �����\n"
11618"        \"enabled\" �� ����� ��������� ���� �� ���� ��� ������ � ������� "
11619"�����\n"
11620"        ��������������.\n"
11621"\n"
11622"    --fullnames / -f\n"
11623"        �� ����������������� �� ������ ����� ���� �����.\n"
11624"\n"
11625"    --preserve / -p\n"
11626"        ���� ����� ��� ����������� ��� ����� ������������ �� ����/�������� "
11627"�� ��� ����� ��� ����������� ���\n"
11628"        �����.  �����������, �� ����������� ����� ��������� ���� �� ����.\n"
11629"\n"
11630"    --invalid / -i\n"
11631"        ��������� ���� ��� ����������� ���� ����� ��� ����� �� ������ ����� "
11632"������.\n"
11633"        ������ ��� -r, -d, -n.\n"
11634"\n"
11635"    --unicode / -u\n"
11636"        ��������� ��� ����������� �� ������ ������������� �� ����������� "
11637"Unicode,  ���� ��� ���������\n"
11638"        ������������� ��������. ������ ��� -r, -d, -n.\n"
11639"\n"
11640"    --help\n"
11641"    -h\n"
11642"        ��������� �� ��������� ������ ��� ���������.\n"
11643"\n"
11644"    �� ����� ������ ����� �� ����� ��� ������ ��� ��������������.\n"
11645"\n"
11646"��������� ��� �� ������ ��� �� -r � -d ��� ����������, ��� �� ��� �������� "
11647"���� ����� ��������\n"
11648"�����, ������������� ��� digest ����, ���� ����� ������� ��� ������� �� ���� "
11649"���\n"
11650"��������� ����.\n"
11651
11652#: bin/list_members:198
11653msgid "Bad --nomail option: %(why)s"
11654msgstr "���� ������� --nomail: %(why)s"
11655
11656#: bin/list_members:209
11657msgid "Bad --digest option: %(kind)s"
11658msgstr "���� ������� --digest: %(kind)s"
11659
11660#: bin/list_members:213 bin/list_members:217 bin/list_members:221
11661#: bin/list_members:225
11662msgid "Only one of -m, -M, -i or -u may be specified."
11663msgstr ""
11664
11665#: bin/list_members:243
11666msgid "Could not open file for writing:"
11667msgstr "��� �� �������� �� ������� �� ������ ��� �� �������:"
11668
11669#: bin/list_owners:20
11670msgid ""
11671"List the owners of a mailing list, or all mailing lists.\n"
11672"\n"
11673"Usage: %(PROGRAM)s [options] [listname ...]\n"
11674"Options:\n"
11675"\n"
11676"    -w / --with-listnames\n"
11677"        Group the owners by list names and include the list names in the\n"
11678"        output.  Otherwise, the owners will be sorted and uniquified based "
11679"on\n"
11680"        the email address.\n"
11681"\n"
11682"    -m / --moderators\n"
11683"        Include the list moderators in the output.\n"
11684"\n"
11685"    -h / --help\n"
11686"        Print this help message and exit.\n"
11687"\n"
11688"    listname\n"
11689"        Print the owners of the specified lists.  More than one can appear\n"
11690"        after the options.  If there are no listnames provided, the owners "
11691"of\n"
11692"        all the lists will be displayed.\n"
11693msgstr ""
11694"��������� ���� �������� �� ����� ���� ���������� ���� ������, � ���� ��� "
11695"������.\n"
11696"\n"
11697"�����: %(PROGRAM)s [options] [listname ...]\n"
11698"��������:\n"
11699"\n"
11700"    -w / --with-listnames\n"
11701"        ���������� ���� ���������� �� �� ������� ��� ������ ��� "
11702"�������������� �� ������� ��� ������ ����\n"
11703"        �����.  �����������, �� ���������� �� ������������ �� ���� ���\n"
11704"        email ��������� ����.\n"
11705"\n"
11706"    -m / --moderators\n"
11707"        ��������������� ��� �������� ��� ����������� ���� �����.\n"
11708"\n"
11709"    -h / --help\n"
11710"        ��������� �� ��������� ������ ��� ���������.\n"
11711"\n"
11712"    ����� ������\n"
11713"        ��������� ���� ���������� ��� ������������� ������.  ������������ "
11714"��� ���� ������� �� ����������� \n"
11715"        ���� ��� ��� ��������.  �� ��� ���������� ������� ������� ������, �� "
11716"���������� ���� ��� ������ �� �����������.\n"
11717
11718#: bin/mailman-config:22
11719msgid ""
11720"Show basic statistics about, and build options for this\n"
11721"installation of Mailman. Requires python 2."
11722msgstr ""
11723
11724#: bin/mailmanctl:20
11725msgid ""
11726"Primary start-up and shutdown script for Mailman's qrunner daemon.\n"
11727"\n"
11728"This script starts, stops, and restarts the main Mailman queue runners, "
11729"making\n"
11730"sure that the various long-running qrunners are still alive and kicking.  "
11731"It\n"
11732"does this by forking and exec'ing the qrunners and waiting on their pids.\n"
11733"When it detects a subprocess has exited, it may restart it.\n"
11734"\n"
11735"The qrunners respond to SIGINT, SIGTERM, and SIGHUP.  SIGINT and SIGTERM "
11736"both\n"
11737"cause the qrunners to exit cleanly, but the master will only restart "
11738"qrunners\n"
11739"that have exited due to a SIGINT.  SIGHUP causes the master and the "
11740"qrunners\n"
11741"to close their log files, and reopen then upon the next printed message.\n"
11742"\n"
11743"The master also responds to SIGINT, SIGTERM, and SIGHUP, which it simply\n"
11744"passes on to the qrunners (note that the master will close and reopen its "
11745"own\n"
11746"log files on receipt of a SIGHUP).  The master also leaves its own process "
11747"id\n"
11748"in the file data/master-qrunner.pid but you normally don't need to use this\n"
11749"pid directly.  The `start', `stop', `restart', and `reopen' commands handle\n"
11750"everything for you.\n"
11751"\n"
11752"Usage: %(PROGRAM)s [options] [ start | stop | restart | reopen ]\n"
11753"\n"
11754"Options:\n"
11755"\n"
11756"    -n/--no-restart\n"
11757"        Don't restart the qrunners when they exit because of an error or a\n"
11758"        SIGINT.  They are never restarted if they exit in response to a\n"
11759"        SIGTERM.  Use this only for debugging.  Only useful if the `start'\n"
11760"        command is given.\n"
11761"\n"
11762"    -u/--run-as-user\n"
11763"        Normally, this script will refuse to run if the user id and group "
11764"id\n"
11765"        are not set to the `mailman' user and group (as defined when you\n"
11766"        configured Mailman).  If run as root, this script will change to "
11767"this\n"
11768"        user and group before the check is made.\n"
11769"\n"
11770"        This can be inconvenient for testing and debugging purposes, so the -"
11771"u\n"
11772"        flag means that the step that sets and checks the uid/gid is "
11773"skipped,\n"
11774"        and the program is run as the current user and group.  This flag is\n"
11775"        not recommended for normal production environments.\n"
11776"\n"
11777"        Note though, that if you run with -u and are not in the mailman "
11778"group,\n"
11779"        you may have permission problems, such as begin unable to delete a\n"
11780"        list's archives through the web.  Tough luck!\n"
11781"\n"
11782"    -s/--stale-lock-cleanup\n"
11783"        If mailmanctl finds an existing master lock, it will normally exit\n"
11784"        with an error message.  With this option, mailmanctl will perform "
11785"an\n"
11786"        extra level of checking.  If a process matching the host/pid "
11787"described\n"
11788"        in the lock file is running, mailmanctl will still exit, but if no\n"
11789"        matching process is found, mailmanctl will remove the apparently "
11790"stale\n"
11791"        lock and make another attempt to claim the master lock.\n"
11792"\n"
11793"    -q/--quiet\n"
11794"        Don't print status messages.  Error messages are still printed to\n"
11795"        standard error.\n"
11796"\n"
11797"    -h/--help\n"
11798"        Print this message and exit.\n"
11799"\n"
11800"Commands:\n"
11801"\n"
11802"    start   - Start the master daemon and all qrunners.  Prints a message "
11803"and\n"
11804"              exits if the master daemon is already running.\n"
11805"\n"
11806"    stop    - Stops the master daemon and all qrunners.  After stopping, no\n"
11807"              more messages will be processed.\n"
11808"\n"
11809"    restart - Restarts the qrunners, but not the master process.  Use this\n"
11810"              whenever you upgrade or update Mailman so that the qrunners "
11811"will\n"
11812"              use the newly installed code.\n"
11813"\n"
11814"    reopen  - This will close all log files, causing them to be re-opened "
11815"the\n"
11816"              next time a message is written to them\n"
11817msgstr ""
11818"�������� script ������� ��� ����������� ��� ��� Mailman qrunner �������.\n"
11819"\n"
11820"�� script ��������, ���������, ��� ����������� ���� ������� Mailman ������� "
11821"����� (queue runners),\n"
11822"������������� ��� �� ������� ������������� qrunners ����� ����� �������. "
11823"����\n"
11824"������� �� �� ������� ��� ��� qrunners ��� ��� ������� ��� pids ����.\n"
11825"���� ��������� ��� ��� subprocess ���� ����, ������ �� ��� �������������.\n"
11826"\n"
11827"�� qrunners ������������ ��� SIGINT, SIGTERM, ��� SIGHUP. �� SIGINT ��� "
11828"SIGTERM ��� �� ���\n"
11829"���������� �� qrunners �� ���� ������, ���� � ������ (master) ���� �� "
11830"������������� �� qrunners\n"
11831"�� ����� ����� ������� ���� ��� SIGINT. �� SIGHUP �������� ��� ����� "
11832"(master) ��� �� qrunners\n"
11833"�� �������� �� ������ ���������� ����, ��� �� �� ����-�������� ������� ����� "
11834"��� ������� �������� ������.\n"
11835"\n"
11836"� ������ (master) ����������� ������ ��� SIGINT, SIGTERM, ��� SIGHUP, � "
11837"������ ����\n"
11838"��������� ���� �� qrunners (��������� ��� � ������ �� ������� ��� �� ������� "
11839"���� ��\n"
11840"������ ���������� ���� �������� ���� SIGHUP). � ������ (master) ������ "
11841"������ ��� ���������� ��� id\n"
11842"�� ��� ������ data/master-qrunner.pid ���� ����� ������ ��� ���������� �� "
11843"��������������� ��\n"
11844"pid �����.  �� ������� `start', `stop', `restart', ��� `reopen' �� "
11845"�������������\n"
11846"�� ����� ��� ����.\n"
11847"\n"
11848"�����: %(PROGRAM)s [options] [ start | stop | restart | reopen ]\n"
11849"\n"
11850"��������:\n"
11851"\n"
11852"    -n/--no-restart\n"
11853"        ��� ����������� ���� qrunners ���� �������� �������� ���� ������ � "
11854"����\n"
11855"        SIGINT. ����� ���� ��� ������������ ��� �������� �� �������� ���\n"
11856"        SIGTERM. �������������� ��� ���� ��� debugging. ����� ������� ���� "
11857"�� ����� � ������ `start'.\n"
11858"\n"
11859"    -u/--run-as-user\n"
11860"        ��������, ���� �� script �� ������� �� ������ �� �� user id ��� �� "
11861"group id\n"
11862"        ��� ����� ����� ��� `mailman' user ��� group (���� ������������ ���� "
11863"�����\n"
11864"        ������������� ��� Mailman). �� ������ ��� root, ���� �� script �� "
11865"������� ��� �����\n"
11866"        user ��� group ������ ����� � �������.\n"
11867"\n"
11868"        ���� ������ �� ����� ���������� ��� ������ ������� ��� ���������, "
11869"���� � -u\n"
11870"        ������ �������� ��� �� ���� ��� ����� ��� ������� �� uid/gid "
11871"���������,\n"
11872"        ��� �� ��������� ������ ��� �� ����o��� ������ ��� �����.  ���� � "
11873"������\n"
11874"        ��� ���������� ��� �� �������� ������������ ���������.\n"
11875"\n"
11876"        ��������� �� �������, ��� �� ������ �� -u ��� ��� ����� ���� ����� "
11877"mailman \n"
11878"        ������ �� ����� ���������� �� �� ����������, ���� �� ��� �������� �� "
11879"���������� \n"
11880"        �� �������� ������ ���� ������ ��� ��� ����.\n"
11881"\n"
11882"    -s/--stale-lock-cleanup\n"
11883"        �� �� mailmanctl ���� ��� ��������� ����� ���������, ���� �� ���� "
11884"��������\n"
11885"        �� ��� ������ ������. �� ���� ��� �������, �� mailmanctl �� "
11886"��������� ���\n"
11887"        extra ������� �������.  ��� ��� ���������� ��� ��������� �� �� host/"
11888"pid ��� ������������\n"
11889"        ��� ������ ������������ ������, �� mailmanctl �� ������� �����, ���� "
11890"�� ���\n"
11891"        ������� ����������� ��� ����������, �� mailmanctl �� ��������� �� "
11892"����������� ����������� \n"
11893"        �������� ��� �� ����� ��� ���� ������������ ����������� ������� "
11894"�������� (master lock) \n"
11895"\n"
11896"    -q/--quiet\n"
11897"      ��� ���������� �������� ����������. �� �������� ������ �����������  \n"
11898"      �� ����������� ���� t����� ����� ��������� (standard error). \n"
11899"\n"
11900"-h/--help\n"
11901"��������� ���� �� ������ ��� �����s. \n"
11902
11903#: bin/mailmanctl:152
11904msgid "PID unreadable in: %(pidfile)s"
11905msgstr ""
11906
11907#: bin/mailmanctl:154
11908msgid "Is qrunner even running?"
11909msgstr ""
11910
11911#: bin/mailmanctl:160
11912msgid "No child with pid: %(pid)s"
11913msgstr ""
11914
11915#: bin/mailmanctl:162
11916msgid "Stale pid file removed."
11917msgstr ""
11918
11919#: bin/mailmanctl:221
11920msgid ""
11921"The master qrunner lock could not be acquired because it appears as if "
11922"another\n"
11923"master qrunner is already running.\n"
11924msgstr ""
11925
11926#: bin/mailmanctl:227
11927msgid ""
11928"The master qrunner lock could not be acquired.  It appears as though there "
11929"is\n"
11930"a stale master qrunner lock.  Try re-running mailmanctl with the -s flag.\n"
11931msgstr ""
11932
11933#: bin/mailmanctl:233
11934msgid ""
11935"The master qrunner lock could not be acquired, because it appears as if "
11936"some\n"
11937"process on some other host may have acquired it.  We can't test for stale\n"
11938"locks across host boundaries, so you'll have to do this manually.  Or, if "
11939"you\n"
11940"know the lock is stale, re-run mailmanctl with the -s flag.\n"
11941"\n"
11942"Lock file: %(LOCKFILE)s\n"
11943"Lock host: %(status)s\n"
11944"\n"
11945"Exiting."
11946msgstr ""
11947
11948#: bin/mailmanctl:280 cron/mailpasswds:119
11949msgid "Site list is missing: %(sitelistname)s"
11950msgstr "� ����� ��� ���������� (site) ��� ������� ���: %(sitelistname)s"
11951
11952#: bin/mailmanctl:305
11953msgid "Run this program as root or as the %(name)s user, or use -u."
11954msgstr ""
11955
11956#: bin/mailmanctl:336
11957msgid "No command given."
11958msgstr "��� ������ ������"
11959
11960#: bin/mailmanctl:339
11961msgid "Bad command: %(command)s"
11962msgstr "�����������: %(command)s"
11963
11964#: bin/mailmanctl:344
11965msgid "Warning!  You may encounter permission problems."
11966msgstr "�������������! �������� �������������� ���������� ����������� (perms)."
11967
11968#: bin/mailmanctl:353
11969msgid "Shutting down Mailman's master qrunner"
11970msgstr ""
11971
11972#: bin/mailmanctl:360
11973msgid "Restarting Mailman's master qrunner"
11974msgstr ""
11975
11976#: bin/mailmanctl:364
11977msgid "Re-opening all log files"
11978msgstr ""
11979
11980#: bin/mailmanctl:400
11981msgid "Starting Mailman's master qrunner."
11982msgstr ""
11983
11984#: bin/mmsitepass:19
11985msgid ""
11986"Set the site password, prompting from the terminal.\n"
11987"\n"
11988"The site password can be used in most if not all places that the list\n"
11989"administrator's password can be used, which in turn can be used in most "
11990"places\n"
11991"that a list users password can be used.\n"
11992"\n"
11993"Usage: %(PROGRAM)s [options] [password]\n"
11994"\n"
11995"Options:\n"
11996"\n"
11997"    -c/--listcreator\n"
11998"        Set the list creator password instead of the site password.  The "
11999"list\n"
12000"        creator is authorized to create and remove lists, but does not have\n"
12001"        the total power of the site administrator.\n"
12002"\n"
12003"    -h/--help\n"
12004"        Print this help message and exit.\n"
12005"\n"
12006"If password is not given on the command line, it will be prompted for.\n"
12007msgstr ""
12008"������ ��� ������ ��������� ���� ���������, �� �������� ��� �� ���������.\n"
12009"\n"
12010"� ������� ��������� ���������� ������ �� �������������� ��� ����������� �� "
12011"��� ��  ��� �� ������ ��� \n"
12012"������ �� �������������� � ������� ��������� ��� ����������� ��� ������, � "
12013"������ �� �� ����� ��� ������ �� �������������� \n"
12014"��� ����������� ������ ��� ������ �� �������������� \n"
12015"� ������� ��������� ��� �������. \n"
12016"\n"
12017"�����: %(PROGRAM)s [��������] [������� ���������] \n"
12018"\n"
12019"��������: \n"
12020"\n"
12021"-c/--listcreator \n"
12022"������ ��� ������ ��������� t�� ���������� ������ ���� ��� ������� ��������� "
12023"��� ����������. �  \n"
12024"���������� ������ ���� �� �������� �� ������������ ��� ���������� ������,  \n"
12025"���� ��� ���� �� �������� ����� ��� ����������� ��� ����������. \n"
12026"\n"
12027"-h/--help \n"
12028"������� �� ������ ���� �������� ��� ��� ������. \n"
12029"\n"
12030"�� � ������� ��� ��������� ��� ��� ������ �������, �� �������. \n"
12031
12032#: bin/mmsitepass:73
12033msgid "site"
12034msgstr "��������� (site)"
12035
12036#: bin/mmsitepass:80
12037msgid "list creator"
12038msgstr "���������� ��� ������"
12039
12040#: bin/mmsitepass:86
12041msgid "New %(pwdesc)s password: "
12042msgstr "���� ������� ��������� ��� %(pwdesc)s "
12043
12044#: bin/mmsitepass:87
12045msgid "Again to confirm password: "
12046msgstr "����������� ��� �������:"
12047
12048#: bin/mmsitepass:89
12049msgid "Passwords do not match; no changes made."
12050msgstr "�� ������� ��� ����������! � ������ ��� �����."
12051
12052#: bin/mmsitepass:92
12053msgid "Interrupted..."
12054msgstr "���������..."
12055
12056#: bin/mmsitepass:98
12057msgid "Password changed."
12058msgstr "� ������� ������ �� ��������."
12059
12060#: bin/mmsitepass:100
12061msgid "Password change failed."
12062msgstr "�������� ������� ��� ������� ���������."
12063
12064#: bin/msgfmt.py:5
12065msgid ""
12066"Generate binary message catalog from textual translation description.\n"
12067"\n"
12068"This program converts a textual Uniforum-style message catalog (.po file) "
12069"into\n"
12070"a binary GNU catalog (.mo file).  This is essentially the same function as "
12071"the\n"
12072"GNU msgfmt program, however, it is a simpler implementation.\n"
12073"\n"
12074"Usage: msgfmt.py [OPTIONS] filename.po\n"
12075"\n"
12076"Options:\n"
12077"    -o file\n"
12078"    --output-file=file\n"
12079"        Specify the output file to write to.  If omitted, output will go to "
12080"a\n"
12081"        file named filename.mo (based off the input file name).\n"
12082"\n"
12083"    -h\n"
12084"    --help\n"
12085"        Print this message and exit.\n"
12086"\n"
12087"    -V\n"
12088"    --version\n"
12089"        Display version information and exit.\n"
12090msgstr ""
12091
12092#: bin/msgfmt.py:49
12093msgid "Add a non-fuzzy translation to the dictionary."
12094msgstr ""
12095
12096#: bin/msgfmt.py:57
12097msgid "Return the generated output."
12098msgstr ""
12099
12100#: bin/newlist:20
12101msgid ""
12102"Create a new, unpopulated mailing list.\n"
12103"\n"
12104"Usage: %(PROGRAM)s [options] [listname [listadmin-addr [admin-password]]]\n"
12105"\n"
12106"Options:\n"
12107"\n"
12108"    -l language\n"
12109"    --language=language\n"
12110"        Make the list's preferred language `language', which must be a two\n"
12111"        letter language code.\n"
12112"\n"
12113"    -u urlhost\n"
12114"    --urlhost=urlhost\n"
12115"        Gives the list's web interface host name.\n"
12116"\n"
12117"    -e emailhost\n"
12118"    --emailhost=emailhost\n"
12119"        Gives the list's email domain name.\n"
12120"\n"
12121"    -q/--quiet\n"
12122"        Normally the administrator is notified by email (after a prompt) "
12123"that\n"
12124"        their list has been created.  This option suppresses the prompt and\n"
12125"        notification.\n"
12126"\n"
12127"    -a/--automate\n"
12128"        This option suppresses the prompt prior to administrator "
12129"notification\n"
12130"        but still sends the notification.  It can be used to make newlist\n"
12131"        totally non-interactive but still send the notification, assuming\n"
12132"        listname, listadmin-addr and admin-password are all specified on "
12133"the\n"
12134"        command line.\n"
12135"\n"
12136"    -h/--help\n"
12137"        Print this help text and exit.\n"
12138"\n"
12139"You can specify as many of the arguments as you want on the command line:\n"
12140"you will be prompted for the missing ones.\n"
12141"\n"
12142"Every Mailman list has two parameters which define the default host name "
12143"for\n"
12144"outgoing email, and the default URL for all web interfaces.  When you\n"
12145"configured Mailman, certain defaults were calculated, but if you are "
12146"running\n"
12147"multiple virtual Mailman sites, then the defaults may not be appropriate "
12148"for\n"
12149"the list you are creating.\n"
12150"\n"
12151"You also specify the domain to create your new list in by typing the "
12152"command\n"
12153"like so:\n"
12154"\n"
12155"    newlist --urlhost=www.mydom.ain mylist\n"
12156"\n"
12157"where `www.mydom.ain' should be the base hostname for the URL to this "
12158"virtual\n"
12159"hosts's lists.  E.g. with this setting people will view the general list\n"
12160"overviews at http://www.mydom.ain/mailman/listinfo.  Also, www.mydom.ain\n"
12161"should be a key in the VIRTUAL_HOSTS mapping in mm_cfg.py/Defaults.py if\n"
12162"the email hostname to be automatically determined.\n"
12163"\n"
12164"If you want the email hostname to be different from the one looked up by "
12165"the\n"
12166"VIRTUAL_HOSTS or if urlhost is not registered in VIRTUAL_HOSTS, you can "
12167"specify\n"
12168"`emailhost' like so:\n"
12169"\n"
12170"    newlist --urlhost=www.mydom.ain --emailhost=mydom.ain mylist\n"
12171"\n"
12172"where `mydom.ain' is the mail domain name. If you don't specify emailhost "
12173"but\n"
12174"urlhost is not in the virtual host list, then mm_cfg.DEFAULT_EMAIL_HOST "
12175"will\n"
12176"be used for the email interface.\n"
12177"\n"
12178"For backward compatibility, you can also specify the domain to create your\n"
12179"new list in by spelling the listname like so:\n"
12180"\n"
12181"    mylist@www.mydom.ain\n"
12182"\n"
12183"where www.mydom.ain is used for `urlhost' but it will also be used for\n"
12184"`emailhost' if it is not found in the virtual host table. Note that\n"
12185"'--urlhost' and '--emailhost' have precedence to this notation.\n"
12186"\n"
12187"If you spell the list name as just `mylist', then the email hostname will "
12188"be\n"
12189"taken from DEFAULT_EMAIL_HOST and the url will be taken from "
12190"DEFAULT_URL_HOST\n"
12191"interpolated into DEFAULT_URL_PATTERN (as defined in your Defaults.py file "
12192"or\n"
12193"overridden by settings in mm_cfg.py).\n"
12194"\n"
12195"Note that listnames are forced to lowercase.\n"
12196msgstr ""
12197
12198#: bin/newlist:162
12199msgid "Unknown language: %(lang)s"
12200msgstr ""
12201
12202#: bin/newlist:167
12203msgid "Enter the name of the list: "
12204msgstr ""
12205
12206#: bin/newlist:188
12207msgid "Enter the email of the person running the list: "
12208msgstr ""
12209
12210#: bin/newlist:193
12211msgid "Initial %(listname)s password: "
12212msgstr "������� ������� ��� %(listname)s :"
12213
12214#: bin/newlist:197
12215msgid "The list password cannot be empty"
12216msgstr "� ������� ��� ������ �� ������ �� ����� �����"
12217
12218#: bin/newlist:220
12219msgid ""
12220" - owner addresses need to be fully-qualified names like \"owner@example.com"
12221"\", not just \"owner\"."
12222msgstr ""
12223
12224#: bin/newlist:244
12225msgid "Hit enter to notify %(listname)s owner..."
12226msgstr ""
12227
12228#: bin/qrunner:20
12229msgid ""
12230"Run one or more qrunners, once or repeatedly.\n"
12231"\n"
12232"Each named runner class is run in round-robin fashion.  In other words, the\n"
12233"first named runner is run to consume all the files currently in its\n"
12234"directory.  When that qrunner is done, the next one is run to consume all "
12235"the\n"
12236"files in /its/ directory, and so on.  The number of total iterations can be\n"
12237"given on the command line.\n"
12238"\n"
12239"Usage: %(PROGRAM)s [options]\n"
12240"\n"
12241"Options:\n"
12242"\n"
12243"    -r runner[:slice:range]\n"
12244"    --runner=runner[:slice:range]\n"
12245"        Run the named qrunner, which must be one of the strings returned by\n"
12246"        the -l option.  Optional slice:range if given, is used to assign\n"
12247"        multiple qrunner processes to a queue.  range is the total number "
12248"of\n"
12249"        qrunners for this queue while slice is the number of this qrunner "
12250"from\n"
12251"        [0..range).\n"
12252"\n"
12253"        If using the slice:range form, you better make sure that each "
12254"qrunner\n"
12255"        for the queue is given the same range value.  If slice:runner is "
12256"not\n"
12257"        given, then 1:1 is used.\n"
12258"\n"
12259"        Multiple -r options may be given, in which case each qrunner will "
12260"run\n"
12261"        once in round-robin fashion.  The special runner `All' is shorthand\n"
12262"        for a qrunner for each listed by the -l option.\n"
12263"\n"
12264"    --once\n"
12265"    -o\n"
12266"        Run each named qrunner exactly once through its main loop.  "
12267"Otherwise,\n"
12268"        each qrunner runs indefinitely, until the process receives a "
12269"SIGTERM\n"
12270"        or SIGINT.\n"
12271"\n"
12272"    -l/--list\n"
12273"        Shows the available qrunner names and exit.\n"
12274"\n"
12275"    -v/--verbose\n"
12276"        Spit out more debugging information to the logs/qrunner log file.\n"
12277"\n"
12278"    -s/--subproc\n"
12279"        This should only be used when running qrunner as a subprocess of "
12280"the\n"
12281"        mailmanctl startup script.  It changes some of the exit-on-error\n"
12282"        behavior to work better with that framework.\n"
12283"\n"
12284"    -h/--help\n"
12285"        Print this message and exit.\n"
12286"\n"
12287"runner is required unless -l or -h is given, and it must be one of the "
12288"names\n"
12289"displayed by the -l switch.\n"
12290"\n"
12291"Note also that this script should be started up from mailmanctl as a normal\n"
12292"operation.  It is only useful for debugging if it is run separately.\n"
12293msgstr ""
12294
12295#: bin/qrunner:179
12296msgid "%(name)s runs the %(runnername)s qrunner"
12297msgstr ""
12298
12299#: bin/qrunner:180
12300msgid "All runs all the above qrunners"
12301msgstr ""
12302
12303#: bin/qrunner:216
12304msgid "No runner name given."
12305msgstr "��� ������ ������ ����� ������ (runner)"
12306
12307#: bin/rb-archfix:21
12308msgid ""
12309"Reduce disk space usage for Pipermail archives.\n"
12310"\n"
12311"Usage: %(PROGRAM)s [options] file ...\n"
12312"\n"
12313"Where options are:\n"
12314"    -h / --help\n"
12315"        Print this help message and exit.\n"
12316"\n"
12317"Only use this to 'fix' archive -article database files that have been "
12318"written\n"
12319"with Mailman 2.1.3 or earlier and have html_body attributes in them.  These\n"
12320"attributes can cause huge amounts of memory bloat and impact performance "
12321"for\n"
12322"high activity lists, particularly those where large text postings are made "
12323"to\n"
12324"them.\n"
12325"\n"
12326"Example:\n"
12327"\n"
12328"%% ls -1 archives/private/*/database/*-article | xargs %(PROGRAM)s\n"
12329"\n"
12330"You should run `bin/check_perms -f' after running this script.\n"
12331"\n"
12332"You will probably want to delete the -article.bak files created by this "
12333"script\n"
12334"when you are satisfied with the results.\n"
12335"\n"
12336"This script is provided for convenience purposes only.  It isn't supported.\n"
12337msgstr ""
12338
12339#: bin/remove_members:20
12340msgid ""
12341"Remove members from a list.\n"
12342"\n"
12343"Usage:\n"
12344"    remove_members [options] [listname] [addr1 ...]\n"
12345"\n"
12346"Options:\n"
12347"\n"
12348"    --file=file\n"
12349"    -f file\n"
12350"        Remove member addresses found in the given file.  If file is\n"
12351"        `-', read stdin.\n"
12352"\n"
12353"    --all\n"
12354"    -a\n"
12355"        Remove all members of the mailing list.\n"
12356"        (mutually exclusive with --fromall)\n"
12357"\n"
12358"    --fromall\n"
12359"        Removes the given addresses from all the lists on this system\n"
12360"        regardless of virtual domains if you have any.  This option cannot "
12361"be\n"
12362"        used -a/--all.  Also, you should not specify a listname when using\n"
12363"        this option.\n"
12364"\n"
12365"    --nouserack\n"
12366"    -n\n"
12367"        Don't send the user acknowledgements.  If not specified, the list\n"
12368"        default value is used.\n"
12369"\n"
12370"    --noadminack\n"
12371"    -N\n"
12372"        Don't send the admin acknowledgements.  If not specified, the list\n"
12373"        default value is used.\n"
12374"\n"
12375"    --help\n"
12376"    -h\n"
12377"        Print this help message and exit.\n"
12378"\n"
12379"    listname is the name of the mailing list to use.\n"
12380"\n"
12381"    addr1 ... are additional addresses to remove.\n"
12382msgstr ""
12383"�������� ����� ��� ��� �����. \n"
12384"\n"
12385"�����: \n"
12386"Remove_members [��������] [listname] [addr1 ...] \n"
12387"\n"
12388"��������: \n"
12389"\n"
12390"     --file=������ \n"
12391"     -f ������ \n"
12392"         ������� ��� ����������� ��� ����� ��� ���������� ��� ������ ��� "
12393"�������.\n"
12394"         ��� �� ������  ����� �� '-', �������� ��� ���  stdin. \n"
12395"\n"
12396"     --all\n"
12397"     -a \n"
12398"         �������� ��� �� ���� ��� �� �����. \n"
12399"         (�������� ����������� � ����� �� ��  -fromall) \n"
12400"\n"
12401"     --fromall\n"
12402"         ������� ��� ����������� ��� �������� ��� ���� ��� ������ �� ���� �� "
12403"������� \n"
12404"         ���������� ��� ���� ���������� ������  �� �����. ���� � ������� ��� "
12405"������ ��         �� \n"
12406"         ��������������� �� ��� -a/--all. ������, ��� �� ������ �� "
12407"���������� \n"
12408"         ��� listname  �� �� �����  ����� ��� ��������. \n"
12409"\n"
12410"     --nouserack \n"
12411"     -n \n"
12412"         �� �������� ������������ ��� ������. ��� ��� ���� ����������, \n"
12413"         ��������������� � �������������� ����. \n"
12414"\n"
12415"     --noadminack \n"
12416"     -N \n"
12417"         ��� �������� ��������� ����  admin . ��� ��� ���� ����������, \n"
12418"         ��������������� � �������������� ����. \n"
12419"\n"
12420"      --help \n"
12421"      -h \n"
12422"          �������� �� ������ ���� ��������  ��� ������. \n"
12423"\n"
12424"      listname ����� �� ����� ��� ������ ������������� ��� �� "
12425"��������������. \n"
12426"\n"
12427"      addr1 ... �� �������� ����������� ��� �� ����������. \n"
12428
12429#: bin/remove_members:156
12430msgid "Could not open file for reading: %(filename)s."
12431msgstr "��� ���� ������ �� ������� ��� ������� ��� ��������: %(filename)s."
12432
12433#: bin/remove_members:163
12434msgid "Error opening list %(listname)s... skipping."
12435msgstr "����� ��� ������� ��� ������  %(listname)s ... �������������."
12436
12437#: bin/remove_members:173
12438msgid "No such member: %(addr)s"
12439msgstr "��� ������� ������ �����: %(addr)s"
12440
12441#: bin/remove_members:178
12442msgid "User `%(addr)s' removed from list: %(listname)s."
12443msgstr "� ������� '%(addr)s' ���������� ��� �� �����: %(listname)s."
12444
12445#: bin/reset_pw.py:21
12446msgid ""
12447"Reset the passwords for members of a mailing list.\n"
12448"\n"
12449"This script resets all the passwords of a mailing list's members.  It can "
12450"also\n"
12451"be used to reset the lists of all members of all mailing lists, but it is "
12452"your\n"
12453"responsibility to let the users know that their passwords have been "
12454"changed.\n"
12455"\n"
12456"This script is intended to be run as a bin/withlist script, i.e.\n"
12457"\n"
12458"% bin/withlist -l -r reset_pw listname [options]\n"
12459"\n"
12460"Options:\n"
12461"    -v / --verbose\n"
12462"        Print what the script is doing.\n"
12463msgstr ""
12464"��������������� ��� �������� ��������� ��� �� ���� ��� ������.\n"
12465"\n"
12466"���� �� script �������������� ����� ���� �������� ��������� ��� ����� ���� "
12467"������ �������������. ������ ������, \n"
12468"�� �������������� ��� �� �������������� ���� ��� ����� ���� ��� ���� ���  "
12469"������, ���� ����� ���� ��� \n"
12470"������ �� ����������� ���� ������� ���� �� ��������� ��� �� ������� ���� "
12471"������������. \n"
12472"\n"
12473"���� �� script ���� �� ����� �� ���������� �� ��� script bin/withlist, "
12474"������ \n"
12475"\n"
12476"% bin/withlist -l -r listname reset_pw [��������] \n"
12477"\n"
12478"��������: \n"
12479"    -v / --verbose \n"
12480"        E�������� �� ����� �� script.\n"
12481
12482#: bin/reset_pw.py:77
12483msgid "Changing passwords for list: %(listname)s"
12484msgstr "������ ���  ������� ��������� ��� �� ����� %(listname)s"
12485
12486#: bin/reset_pw.py:83
12487msgid "New password for member %(member)40s: %(randompw)s"
12488msgstr "���� ������� ��������� ��� �� ����� %(member)40s: %(randompw)s"
12489
12490#: bin/rmlist:19
12491msgid ""
12492"Remove the components of a mailing list with impunity - beware!\n"
12493"\n"
12494"This removes (almost) all traces of a mailing list.  By default, the lists\n"
12495"archives are not removed, which is very handy for retiring old lists.\n"
12496"\n"
12497"Usage:\n"
12498"    rmlist [-a] [-h] listname\n"
12499"\n"
12500"Where:\n"
12501"    --archives\n"
12502"    -a\n"
12503"        Remove the list's archives too, or if the list has already been\n"
12504"        deleted, remove any residual archives.\n"
12505"\n"
12506"    --help\n"
12507"    -h\n"
12508"        Print this help message and exit.\n"
12509"\n"
12510msgstr ""
12511"��������� ��� ��������� ����  ������ �� - �������! \n"
12512"\n"
12513"���� ������� (������) ��� �� ���� ���� ������. �� �������, �� �������� "
12514"������ \n"
12515"��� ������ ��� ������������, ��� ����� ���� ������ ��� ��������� ������� "
12516"������. \n"
12517"\n"
12518"�����: \n"
12519"   rmlist [-a] [-h] listname \n"
12520"\n"
12521"����: \n"
12522"    --archives \n"
12523"    -a \n"
12524"       ��������� ������ ��� ��� ��������� ������� ��� ������. � �� � ����� "
12525"���� ��� \n"
12526"       ���������, ������� ����� �������� ������ ��� ����� ���������. \n"
12527"\n"
12528"    --help\n"
12529"    -h\n"
12530"       �������� �� ������ ���� �� �������� ��� ������.\n"
12531"\n"
12532
12533#: bin/rmlist:73 bin/rmlist:76
12534msgid "Removing %(msg)s"
12535msgstr "�������� %(msg)s"
12536
12537#: bin/rmlist:81
12538msgid "%(listname)s %(msg)s not found as %(filename)s"
12539msgstr "%(listname)s %(msg)s ��� ������� ��� %(filename)s"
12540
12541#: bin/rmlist:105
12542msgid "No such list (or list already deleted): %(listname)s"
12543msgstr "��� ������� ������ ����� (� � ����� ���� ��� ���������): %(listname)s"
12544
12545#: bin/rmlist:108
12546msgid "No such list: %(listname)s.  Removing its residual archives."
12547msgstr ""
12548"��� ������� ������ �����: %(listname)s. �������� ��� ��������� ������� ��� "
12549"����� ���������"
12550
12551#: bin/rmlist:112
12552msgid "Not removing archives.  Reinvoke with -a to remove them."
12553msgstr ""
12554"��� ������������ �� ��������. ����������� ��� ������ �� -a ��� �� �������� "
12555"����."
12556
12557#: bin/rmlist:126
12558msgid "list info"
12559msgstr "����������� ��� ������"
12560
12561#: bin/rmlist:134
12562msgid "stale lock file"
12563msgstr "����� ������ �����������"
12564
12565#: bin/rmlist:142
12566msgid "held message file"
12567msgstr "������ ��� ��������� ��� ����������."
12568
12569#: bin/rmlist:147 bin/rmlist:149
12570msgid "private archives"
12571msgstr "����� ��� �������� �������� ������"
12572
12573#: bin/rmlist:151 bin/rmlist:153
12574msgid "public archives"
12575msgstr "I������� ������"
12576
12577#: bin/show_qfiles:20
12578msgid ""
12579"Show the contents of one or more Mailman queue files.\n"
12580"\n"
12581"Usage: show_qfiles [options] qfile ...\n"
12582"\n"
12583"Options:\n"
12584"\n"
12585"    -q / --quiet\n"
12586"        Don't print `helpful' message delimiters.\n"
12587"\n"
12588"    -h / --help\n"
12589"        Print this text and exit.\n"
12590"\n"
12591"Example: show_qfiles qfiles/shunt/*.pck\n"
12592msgstr ""
12593"�������� ��� ������������ ���� � ������������ ������� ����� ��� Mailman.\n"
12594"\n"
12595"�����: show_qfiles [��������] qfile ... \n"
12596"\n"
12597"��������: \n"
12598"\n"
12599"    -q / --quiet\n"
12600"��� ���������� '������o��' ��������� ���������. \n"
12601"\n"
12602"    -h / --help \n"
12603"       �������� ���� �� ������� ��� ������. \n"
12604"\n"
12605"       ����������: show_qfiles qfiles/shunt/ *.pck\n"
12606
12607#: bin/sync_members:19
12608msgid ""
12609"Synchronize a mailing list's membership with a flat file.\n"
12610"\n"
12611"This script is useful if you have a Mailman mailing list and a sendmail\n"
12612":include: style list of addresses (also as is used in Majordomo).  For "
12613"every\n"
12614"address in the file that does not appear in the mailing list, the address "
12615"is\n"
12616"added.  For every address in the mailing list that does not appear in the\n"
12617"file, the address is removed.  Other options control what happens when an\n"
12618"address is added or removed.\n"
12619"\n"
12620"Usage: %(PROGRAM)s [options] -f file listname\n"
12621"\n"
12622"Where `options' are:\n"
12623"\n"
12624"    --no-change\n"
12625"    -n\n"
12626"        Don't actually make the changes.  Instead, print out what would be\n"
12627"        done to the list.\n"
12628"\n"
12629"    --welcome-msg[=<yes|no>]\n"
12630"    -w[=<yes|no>]\n"
12631"        Sets whether or not to send the newly added members a welcome\n"
12632"        message, overriding whatever the list's `send_welcome_msg' setting\n"
12633"        is.  With -w=yes or -w, the welcome message is sent.  With -w=no, "
12634"no\n"
12635"        message is sent.\n"
12636"\n"
12637"    --goodbye-msg[=<yes|no>]\n"
12638"    -g[=<yes|no>]\n"
12639"        Sets whether or not to send the goodbye message to removed members,\n"
12640"        overriding whatever the list's `send_goodbye_msg' setting is.  With\n"
12641"        -g=yes or -g, the goodbye message is sent.  With -g=no, no message "
12642"is\n"
12643"        sent.\n"
12644"\n"
12645"    --digest[=<yes|no>]\n"
12646"    -d[=<yes|no>]\n"
12647"        Selects whether to make newly added members receive messages in\n"
12648"        digests.  With -d=yes or -d, they become digest members.  With -"
12649"d=no\n"
12650"        (or if no -d option given) they are added as regular members.\n"
12651"\n"
12652"    --notifyadmin[=<yes|no>]\n"
12653"    -a[=<yes|no>]\n"
12654"        Specifies whether the admin should be notified for each "
12655"subscription\n"
12656"        or unsubscription.  If you're adding a lot of addresses, you\n"
12657"        definitely want to turn this off!  With -a=yes or -a, the admin is\n"
12658"        notified.  With -a=no, the admin is not notified.  With no -a "
12659"option,\n"
12660"        the default for the list is used.\n"
12661"\n"
12662"    --file <filename | ->\n"
12663"    -f <filename | ->\n"
12664"        This option is required.  It specifies the flat file to synchronize\n"
12665"        against.  Email addresses must appear one per line.  If filename is\n"
12666"        `-' then stdin is used.\n"
12667"\n"
12668"    --help\n"
12669"    -h\n"
12670"        Print this message.\n"
12671"\n"
12672"    listname\n"
12673"        Required.  This specifies the list to synchronize.\n"
12674msgstr ""
12675
12676#: bin/sync_members:115
12677msgid "Bad choice: %(yesno)s"
12678msgstr "���� �������: %(yesno)s"
12679
12680#: bin/sync_members:138
12681msgid "Dry run mode"
12682msgstr ""
12683
12684#: bin/sync_members:159
12685msgid "Only one -f switch allowed"
12686msgstr "���� ���� -f ��������� �����������"
12687
12688#: bin/sync_members:163
12689msgid "No argument to -f given"
12690msgstr "�� ������ ������ ��� -f"
12691
12692#: bin/sync_members:172
12693msgid "Illegal option: %(opt)s"
12694msgstr "�� ������ �������: %(opt)s"
12695
12696#: bin/sync_members:178
12697msgid "No listname given"
12698msgstr "��� ������ ����� ������."
12699
12700#: bin/sync_members:182
12701msgid "Must have a listname and a filename"
12702msgstr "�� ������ �� ����� ��� ����� ������ ��� ���� ����� �������"
12703
12704#: bin/sync_members:191
12705msgid "Cannot read address file: %(filename)s: %(msg)s"
12706msgstr "��� ����� �� ������� �� ������ �����������: %(filename)s: %(msg)s"
12707
12708#: bin/sync_members:203
12709msgid "Ignore  :  %(addr)30s"
12710msgstr "����� :  %(addr)30s"
12711
12712#: bin/sync_members:212
12713msgid "Invalid :  %(addr)30s"
12714msgstr "�� ������ email ��������� : %(addr)30s"
12715
12716#: bin/sync_members:215
12717msgid "You must fix the preceding invalid addresses first."
12718msgstr "�� ������ �� ���������� ��� ����������� ����� ��������� �����."
12719
12720#: bin/sync_members:264
12721msgid "Added  : %(s)s"
12722msgstr "���������� : %(s)s"
12723
12724#: bin/sync_members:289
12725msgid "Removed: %(s)s"
12726msgstr "����������: %(s)s"
12727
12728#: bin/transcheck:19
12729msgid ""
12730"\n"
12731"Check a given Mailman translation, making sure that variables and\n"
12732"tags referenced in translation are the same variables and tags in\n"
12733"the original templates and catalog.\n"
12734"\n"
12735"Usage:\n"
12736"\n"
12737"cd $MAILMAN_DIR\n"
12738"%(program)s [-q] <lang>\n"
12739"\n"
12740"Where <lang> is your country code (e.g. 'it' for Italy) and -q is\n"
12741"to ask for a brief summary.\n"
12742msgstr ""
12743
12744#: bin/transcheck:58
12745msgid "check a translation comparing with the original string"
12746msgstr "������� ���������� ��  �������� �� ��� ������ ������������"
12747
12748#: bin/transcheck:68
12749msgid "scan a string from the original file"
12750msgstr ""
12751
12752#: bin/transcheck:78
12753msgid "scan a translated string"
12754msgstr "������ ���� ������������� ��� �� ������ ������"
12755
12756#: bin/transcheck:91
12757msgid "check for differences between checked in and checked out"
12758msgstr ""
12759
12760#: bin/transcheck:124
12761msgid "parse a .po file extracting msgids and msgstrs"
12762msgstr ""
12763
12764#: bin/transcheck:143
12765msgid ""
12766"States table for the finite-states-machine parser:\n"
12767"            0  idle\n"
12768"            1  filename-or-comment\n"
12769"            2  msgid\n"
12770"            3  msgstr\n"
12771"            4  end\n"
12772"        "
12773msgstr ""
12774
12775#: bin/transcheck:280
12776msgid ""
12777"check a translated template against the original one\n"
12778"       search also <MM-*> tags if html is not zero"
12779msgstr ""
12780"������� ���� ������������� �������� �� �� ������\n"
12781"��������� ������ ���  <MM-*> �������� �� �� html ��� ����� �����"
12782
12783#: bin/transcheck:327
12784msgid "scan the po file comparing msgids with msgstrs"
12785msgstr "������ ��� ������� po ��� �������� msgids �� msgstrs"
12786
12787#: bin/unshunt:20
12788msgid ""
12789"Move a message from the shunt queue to the original queue.\n"
12790"\n"
12791"Usage: %(PROGRAM)s [options] [directory]\n"
12792"\n"
12793"Where:\n"
12794"\n"
12795"    -h / --help\n"
12796"        Print help and exit.\n"
12797"\n"
12798"Optional `directory' specifies a directory to dequeue from other than\n"
12799"qfiles/shunt.  *** Warning ***  Do not unshunt messages that weren't\n"
12800"shunted to begin with.  For example, running unshunt on qfiles/out/\n"
12801"will result in losing all the messages in that queue.\n"
12802msgstr ""
12803
12804#: bin/unshunt:85
12805msgid ""
12806"Cannot unshunt message %(filebase)s, skipping:\n"
12807"%(e)s"
12808msgstr ""
12809
12810#: bin/update:20
12811msgid ""
12812"Perform all necessary upgrades.\n"
12813"\n"
12814"Usage: %(PROGRAM)s [options]\n"
12815"\n"
12816"Options:\n"
12817"    -f/--force\n"
12818"        Force running the upgrade procedures.  Normally, if the version "
12819"number\n"
12820"        of the installed Mailman matches the current version number (or a\n"
12821"        `downgrade' is detected), nothing will be done.\n"
12822"\n"
12823"    -h/--help\n"
12824"        Print this text and exit.\n"
12825"\n"
12826"Use this script to help you update to the latest release of Mailman from\n"
12827"some previous version.  It knows about versions back to 1.0b4 (?).\n"
12828msgstr ""
12829
12830#: bin/update:107
12831msgid "Fixing language templates: %(listname)s"
12832msgstr "�������� ��� �������� ��� �������:    %(listname)s"
12833
12834#: bin/update:196 bin/update:711
12835msgid "WARNING: could not acquire lock for list: %(listname)s"
12836msgstr ""
12837"�������������: ��� ����� �� �������� �������� ��� �� �����: %(listname)s"
12838
12839#: bin/update:215
12840msgid "Resetting %(n)s BYBOUNCEs disabled addrs with no bounce info"
12841msgstr ""
12842
12843#: bin/update:221
12844msgid "Updating the held requests database."
12845msgstr "�������������� ��� ����� ��������� ��������� �� �������"
12846
12847#: bin/update:243
12848msgid ""
12849"For some reason, %(mbox_dir)s exists as a file.  This won't work with\n"
12850"b6, so I'm renaming it to %(mbox_dir)s.tmp and proceeding."
12851msgstr ""
12852"��� ������ ����, %(mbox_dir)s ������� �� ������. ���� ��� �� ������������ �� "
12853"��� \n"
12854"b6, ���� to ���������� �� �� %(mbox_dir)s.tmp ��� to �������������."
12855
12856#: bin/update:255
12857msgid ""
12858"\n"
12859"%(listname)s has both public and private mbox archives.  Since this list\n"
12860"currently uses private archiving, I'm installing the private mbox archive\n"
12861"-- %(o_pri_mbox_file)s -- as the active archive, and renaming\n"
12862"        %(o_pub_mbox_file)s\n"
12863"to\n"
12864"        %(o_pub_mbox_file)s.preb6\n"
12865"\n"
12866"You can integrate that into the archives if you want by using the 'arch'\n"
12867"script.\n"
12868msgstr ""
12869
12870#: bin/update:270
12871msgid ""
12872"%s has both public and private mbox archives.  Since this list\n"
12873"currently uses public archiving, I'm installing the public mbox file\n"
12874"archive file (%s) as the active one, and renaming\n"
12875"        %s\n"
12876"    to\n"
12877"        %s.preb6\n"
12878"\n"
12879"You can integrate that into the archives if you want by using the 'arch'\n"
12880"script.\n"
12881msgstr ""
12882
12883#: bin/update:287
12884msgid "- updating old private mbox file"
12885msgstr "- ��������� ������� ��������� ������� mbox"
12886
12887#: bin/update:295
12888msgid ""
12889"    unknown file in the way, moving\n"
12890"        %(o_pri_mbox_file)s\n"
12891"    to\n"
12892"        %(newname)s"
12893msgstr ""
12894
12895#: bin/update:309
12896msgid "- updating old public mbox file"
12897msgstr "- ��������� ������� �������� ������� mbox"
12898
12899#: bin/update:317
12900msgid ""
12901"    unknown file in the way, moving\n"
12902"        %(o_pub_mbox_file)s\n"
12903"    to\n"
12904"        %(newname)s"
12905msgstr ""
12906
12907#: bin/update:353
12908msgid "- This list looks like it might have <= b4 list templates around"
12909msgstr "- ���� � ����� ������� ��  ���� <= b4 ������� ������ ����"
12910
12911#: bin/update:361
12912msgid "- moved %(o_tmpl)s to %(n_tmpl)s"
12913msgstr "- ����������� �� %(o_tmpl)s ��� %(n_tmpl)s"
12914
12915#: bin/update:363
12916msgid "- both %(o_tmpl)s and %(n_tmpl)s exist, leaving untouched"
12917msgstr "- ��� �� ��� %(o_tmpl)s ��� %(n_tmpl)s ��������, ������ �����������"
12918
12919#: bin/update:366
12920msgid "- %(o_tmpl)s doesn't exist, leaving untouched"
12921msgstr "- %(o_tmpl)s ��� �������, ����� �����������"
12922
12923#: bin/update:396
12924msgid "removing directory %(src)s and everything underneath"
12925msgstr " ��������  ���  directory %(src)s ��� ��������� ���� ���"
12926
12927#: bin/update:399
12928msgid "removing %(src)s"
12929msgstr "�������� %(src)s"
12930
12931#: bin/update:403
12932msgid "Warning: couldn't remove %(src)s -- %(rest)s"
12933msgstr "�������������: ��� ���� ������ � �������� %(src)s -- %(rest)s"
12934
12935#: bin/update:408
12936msgid "couldn't remove old file %(pyc)s -- %(rest)s"
12937msgstr "��� ���� ������ � �������� ��� ������ ������� %(pyc)s -- %(rest)s"
12938
12939#: bin/update:412
12940msgid "updating old qfiles"
12941msgstr "��������� ������ qfiles"
12942
12943#: bin/update:455
12944msgid "Warning!  Not a directory: %(dirpath)s"
12945msgstr "�������! ��� ����� '��� directory %(dirpath)s"
12946
12947#: bin/update:530
12948msgid "message is unparsable: %(filebase)s"
12949msgstr "�� ������ ����� �� ���������: %(filebase)s"
12950
12951#: bin/update:544
12952msgid "Warning!  Deleting empty .pck file: %(pckfile)s"
12953msgstr "�������! �������� �����. .pck ������: %(pckfile)s"
12954
12955#: bin/update:563
12956msgid "Updating Mailman 2.0 pending_subscriptions.db database"
12957msgstr "��������� Mailman 2.0 pending_subscriptions.db ���� ���������"
12958
12959#: bin/update:574
12960msgid "Updating Mailman 2.1.4 pending.pck database"
12961msgstr "��������� Mailman 2.1.4 pending_subscriptions.db ���� ���������"
12962
12963#: bin/update:598
12964msgid "Ignoring bad pended data: %(key)s: %(val)s"
12965msgstr "��������� ����� �� ������� (bad pended)) ���������: %(key)s: %(val)s"
12966
12967#: bin/update:614
12968msgid "WARNING: Ignoring duplicate pending ID: %(id)s."
12969msgstr "�������������: ��������� ����� �� ������� �������������� (ID): %(id)s."
12970
12971#: bin/update:667
12972msgid "getting rid of old source files"
12973msgstr "�� ����������� ��� �� ����� ������ ����������"
12974
12975#: bin/update:677
12976msgid "no lists == nothing to do, exiting"
12977msgstr "��� �������� ������ == ��� ������� ������ �� ����, ������"
12978
12979#: bin/update:684
12980msgid ""
12981"fixing all the perms on your old html archives to work with b6\n"
12982"If your archives are big, this could take a minute or two..."
12983msgstr ""
12984"��������  ���� ��� ����������� ��� ����� HTML ������ ��������� ��� ��� �� "
12985"����������� �� b6 \n"
12986"�� �� ������ ��� ����� ������, ���� �� �������� �� ����� ��� � ��� ����� ..."
12987
12988#: bin/update:689
12989msgid "done"
12990msgstr "�����"
12991
12992#: bin/update:691
12993msgid "Updating mailing list: %(listname)s"
12994msgstr "��������� ������ ������������ ������������: %(listname)s"
12995
12996#: bin/update:694
12997msgid "Updating Usenet watermarks"
12998msgstr ""
12999
13000#: bin/update:699
13001msgid "- nothing to update here"
13002msgstr "- ��� ������� ������ ��� ��������� ���"
13003
13004#: bin/update:722
13005msgid "- usenet watermarks updated and gate_watermarks removed"
13006msgstr ""
13007
13008#: bin/update:736
13009msgid ""
13010"\n"
13011"\n"
13012"NOTE NOTE NOTE NOTE NOTE\n"
13013"\n"
13014"    You are upgrading an existing Mailman installation, but I can't tell "
13015"what\n"
13016"    version you were previously running.\n"
13017"\n"
13018"    If you are upgrading from Mailman 1.0b9 or earlier you will need to\n"
13019"    manually update your mailing lists.  For each mailing list you need to\n"
13020"    copy the file templates/options.html lists/<listname>/options.html.\n"
13021"\n"
13022"    However, if you have edited this file via the Web interface, you will "
13023"have\n"
13024"    to merge your changes into this file, otherwise you will lose your\n"
13025"    changes.\n"
13026"\n"
13027"NOTE NOTE NOTE NOTE NOTE\n"
13028"\n"
13029msgstr ""
13030
13031#: bin/update:793
13032msgid "No updates are necessary."
13033msgstr "��� ����������� �����������"
13034
13035#: bin/update:796
13036msgid ""
13037"Downgrade detected, from version %(hexlversion)s to version %(hextversion)s\n"
13038"This is probably not safe.\n"
13039"Exiting."
13040msgstr ""
13041"����������� ���������� , ��� ������ %(hexlversion)s �� ������ "
13042"%(hextversion)s \n"
13043"���� ��� ����� ������� �������. \n"
13044"������."
13045
13046#: bin/update:801
13047msgid "Upgrading from version %(hexlversion)s to %(hextversion)s"
13048msgstr "���������� ��� ������ %(hexlversion)s �� %(hextversion)s"
13049
13050#: bin/update:810
13051msgid ""
13052"\n"
13053"ERROR:\n"
13054"\n"
13055"The locks for some lists could not be acquired.  This means that either\n"
13056"Mailman was still active when you upgraded, or there were stale locks in "
13057"the\n"
13058"%(lockdir)s directory.\n"
13059"\n"
13060"You must put Mailman into a quiescent state and remove all stale locks, "
13061"then\n"
13062"re-run \"make update\" manually.  See the INSTALL and UPGRADE files for "
13063"details.\n"
13064msgstr ""
13065
13066#: bin/version:19
13067msgid "Print the Mailman version.\n"
13068msgstr "��������� ��� ������ ��� mailman.\n"
13069
13070#: bin/version:26
13071msgid "Using Mailman version:"
13072msgstr "����� ������� Mailman: "
13073
13074#: bin/withlist:20
13075msgid ""
13076"General framework for interacting with a mailing list object.\n"
13077"\n"
13078"There are two ways to use this script: interactively or programmatically.\n"
13079"Using it interactively allows you to play with, examine and modify a "
13080"MailList\n"
13081"object from Python's interactive interpreter.  When running interactively, "
13082"a\n"
13083"MailList object called `m' will be available in the global namespace.  It "
13084"also\n"
13085"loads the class MailList into the global namespace.\n"
13086"\n"
13087"Programmatically, you can write a function to operate on a MailList object,\n"
13088"and this script will take care of the housekeeping (see below for "
13089"examples).\n"
13090"In that case, the general usage syntax is:\n"
13091"\n"
13092"%% bin/withlist [options] listname [args ...]\n"
13093"\n"
13094"Options:\n"
13095"\n"
13096"    -l / --lock\n"
13097"        Lock the list when opening.  Normally the list is opened unlocked\n"
13098"        (e.g. for read-only operations).  You can always lock the file "
13099"after\n"
13100"        the fact by typing `m.Lock()'\n"
13101"\n"
13102"        Note that if you use this option, you should explicitly call m."
13103"Save()\n"
13104"        before exiting, since the interpreter's clean up procedure will not\n"
13105"        automatically save changes to the MailList object (but it will "
13106"unlock\n"
13107"        the list).\n"
13108"\n"
13109"    -i / --interactive\n"
13110"        Leaves you at an interactive prompt after all other processing is\n"
13111"        complete.  This is the default unless the -r option is given.\n"
13112"\n"
13113"    --run [module.]callable\n"
13114"    -r [module.]callable\n"
13115"        This can be used to run a script with the opened MailList object.\n"
13116"        This works by attempting to import `module' (which must be in the\n"
13117"        directory containing withlist, or already be accessible on your\n"
13118"        sys.path), and then calling `callable' from the module.  callable "
13119"can\n"
13120"        be a class or function; it is called with the MailList object as "
13121"the\n"
13122"        first argument.  If additional args are given on the command line,\n"
13123"        they are passed as subsequent positional args to the callable.\n"
13124"\n"
13125"        Note that `module.' is optional; if it is omitted then a module "
13126"with\n"
13127"        the name `callable' will be imported.\n"
13128"\n"
13129"        The global variable `r' will be set to the results of this call.\n"
13130"\n"
13131"    --all / -a\n"
13132"        This option only works with the -r option.  Use this if you want to\n"
13133"        execute the script on all mailing lists.  When you use -a you "
13134"should\n"
13135"        not include a listname argument on the command line.  The variable "
13136"`r'\n"
13137"        will be a list of all the results.\n"
13138"\n"
13139"    --quiet / -q\n"
13140"        Suppress all status messages.\n"
13141"\n"
13142"    --help / -h\n"
13143"        Print this message and exit\n"
13144"\n"
13145"\n"
13146"Here's an example of how to use the -r option.  Say you have a file in the\n"
13147"Mailman installation directory called `listaddr.py', with the following\n"
13148"two functions:\n"
13149"\n"
13150"def listaddr(mlist):\n"
13151"    print mlist.GetListEmail()\n"
13152"\n"
13153"def requestaddr(mlist):\n"
13154"    print mlist.GetRequestEmail()\n"
13155"\n"
13156"Now, from the command line you can print the list's posting address by "
13157"running\n"
13158"the following from the command line:\n"
13159"\n"
13160"%% bin/withlist -r listaddr mylist\n"
13161"Loading list: mylist (unlocked)\n"
13162"Importing listaddr ...\n"
13163"Running listaddr.listaddr() ...\n"
13164"mylist@myhost.com\n"
13165"\n"
13166"And you can print the list's request address by running:\n"
13167"\n"
13168"%% bin/withlist -r listaddr.requestaddr mylist\n"
13169"Loading list: mylist (unlocked)\n"
13170"Importing listaddr ...\n"
13171"Running listaddr.requestaddr() ...\n"
13172"mylist-request@myhost.com\n"
13173"\n"
13174"As another example, say you wanted to change the password for a particular\n"
13175"user on a particular list.  You could put the following function in a file\n"
13176"called `changepw.py':\n"
13177"\n"
13178"from Mailman.Errors import NotAMemberError\n"
13179"\n"
13180"def changepw(mlist, addr, newpasswd):\n"
13181"    try:\n"
13182"        mlist.setMemberPassword(addr, newpasswd)\n"
13183"        mlist.Save()\n"
13184"    except NotAMemberError:\n"
13185"        print 'No address matched:', addr\n"
13186"\n"
13187"and run this from the command line:\n"
13188" %% bin/withlist -l -r changepw mylist somebody@somewhere.org foobar\n"
13189msgstr ""
13190
13191#: bin/withlist:164
13192msgid ""
13193"Unlock a locked list, but do not implicitly Save() it.\n"
13194"\n"
13195"    This does not get run if the interpreter exits because of a signal, or "
13196"if\n"
13197"    os._exit() is called.  It will get called if an exception occurs "
13198"though.\n"
13199"    "
13200msgstr ""
13201
13202#: bin/withlist:175
13203msgid "Unlocking (but not saving) list: %(listname)s"
13204msgstr "���������� (���� ��� ����������) ������: %(listname)s"
13205
13206#: bin/withlist:179
13207msgid "Finalizing"
13208msgstr "��������"
13209
13210#: bin/withlist:188
13211msgid "Loading list %(listname)s"
13212msgstr "������� ������ %(listname)s"
13213
13214#: bin/withlist:190
13215msgid "(locked)"
13216msgstr "����������"
13217
13218#: bin/withlist:192
13219msgid "(unlocked)"
13220msgstr "������������"
13221
13222#: bin/withlist:197
13223msgid "Unknown list: %(listname)s"
13224msgstr "������� �����: %(listname)s"
13225
13226#: bin/withlist:237
13227msgid "No list name supplied."
13228msgstr "���  ������ ����� ������:"
13229
13230#: bin/withlist:246
13231msgid "--all requires --run"
13232msgstr "--all ������� --run"
13233
13234#: bin/withlist:266
13235msgid "Importing %(module)s..."
13236msgstr "�������� %(module)s..."
13237
13238#: bin/withlist:270
13239msgid "Running %(module)s.%(callable)s()..."
13240msgstr "�������� %(module)s.%(callable)s()..."
13241
13242#: bin/withlist:291
13243msgid "The variable `m' is the %(listname)s MailList instance"
13244msgstr "� ��������� `m' ����� �� %(listname)s ��� MailList "
13245
13246#: cron/bumpdigests:19
13247msgid ""
13248"Increment the digest volume number and reset the digest number to one.\n"
13249"\n"
13250"Usage: %(PROGRAM)s [options] [listname ...]\n"
13251"\n"
13252"Options:\n"
13253"\n"
13254"    --help/-h\n"
13255"        Print this message and exit.\n"
13256"\n"
13257"The lists named on the command line are bumped.  If no list names are "
13258"given,\n"
13259"all lists are bumped.\n"
13260msgstr ""
13261
13262#: cron/checkdbs:20
13263msgid ""
13264"Check for pending admin requests and mail the list owners if necessary.\n"
13265"\n"
13266"Usage: %(PROGRAM)s [options]\n"
13267"\n"
13268"Options:\n"
13269"\n"
13270"    -h/--help\n"
13271"        Print this message and exit.\n"
13272msgstr ""
13273
13274#: cron/checkdbs:108
13275msgid ""
13276"Notice: %(discarded)d old request(s) automatically expired.\n"
13277"\n"
13278msgstr ""
13279
13280#: cron/checkdbs:121
13281msgid "%(count)d %(realname)s moderator request(s) waiting"
13282msgstr ""
13283
13284#: cron/checkdbs:124
13285msgid "%(realname)s moderator request check result"
13286msgstr ""
13287
13288#: cron/checkdbs:144
13289msgid "Pending subscriptions:"
13290msgstr "�������� �� �������"
13291
13292#: cron/checkdbs:155
13293#, fuzzy
13294msgid "Pending unsubscriptions:"
13295msgstr "�������� �� �������"
13296
13297#: cron/checkdbs:162
13298msgid ""
13299"\n"
13300"Pending posts:"
13301msgstr ""
13302"\n"
13303"�������� �� �������"
13304
13305#: cron/checkdbs:169
13306msgid ""
13307"From: %(sender)s on %(date)s\n"
13308"Subject: %(subject)s\n"
13309"Cause: %(reason)s"
13310msgstr ""
13311
13312#: cron/cull_bad_shunt:20
13313msgid ""
13314"Cull bad and shunt queues, recommended once per day.\n"
13315"\n"
13316"This script goes through the 'bad' and 'shunt' queue directories and,\n"
13317"if mm_cfg.BAD_SHUNT_STALE_AFTER is > 0, it removes all files more than\n"
13318"that many seconds old.\n"
13319"\n"
13320"If mm_cfg.BAD_SHUNT_ARCHIVE_DIRECTORY is a writable directory, the old\n"
13321"files are moved there. Otherwise they are deleted.\n"
13322"\n"
13323"Only regular files immediately subordinate to the 'bad' and 'shunt'\n"
13324"directories are processed. Anything else is skipped.\n"
13325"\n"
13326"Usage: %(PROGRAM)s [options]\n"
13327"\n"
13328"Options:\n"
13329"    -h / --help\n"
13330"        Print this message and exit.\n"
13331msgstr ""
13332
13333#: cron/disabled:20
13334msgid ""
13335"Process disabled members, recommended once per day.\n"
13336"\n"
13337"This script cruises through every mailing list looking for members whose\n"
13338"delivery is disabled.  If they have been disabled due to bounces, they will\n"
13339"receive another notification, or they may be removed if they've received "
13340"the\n"
13341"maximum number of notifications.\n"
13342"\n"
13343"Use the --byadmin, --byuser, and --unknown flags to also send notifications "
13344"to\n"
13345"members whose accounts have been disabled for those reasons.  Use --all to\n"
13346"send the notification to all disabled members.\n"
13347"\n"
13348"Usage: %(PROGRAM)s [options]\n"
13349"\n"
13350"Options:\n"
13351"    -h / --help\n"
13352"        Print this message and exit.\n"
13353"\n"
13354"    -o / --byadmin\n"
13355"        Also send notifications to any member disabled by the list\n"
13356"        owner/administrator.\n"
13357"\n"
13358"    -m / --byuser\n"
13359"        Also send notifications to any member disabled by themselves.\n"
13360"\n"
13361"    -u / --unknown\n"
13362"        Also send notifications to any member disabled for unknown reasons\n"
13363"        (usually a legacy disabled address).\n"
13364"\n"
13365"    -b / --notbybounce\n"
13366"        Don't send notifications to members disabled because of bounces "
13367"(the\n"
13368"        default is to notify bounce disabled members).\n"
13369"\n"
13370"    -a / --all\n"
13371"        Send notifications to all disabled members.\n"
13372"\n"
13373"    -f / --force\n"
13374"        Send notifications to disabled members even if they're not due a "
13375"new\n"
13376"        notification yet.\n"
13377"\n"
13378"    -l listname\n"
13379"    --listname=listname\n"
13380"        Process only the given list, otherwise do all lists.\n"
13381msgstr ""
13382
13383#: cron/disabled:145
13384msgid "[disabled by periodic sweep and cull, no message available]"
13385msgstr ""
13386
13387#: cron/gate_news:19
13388msgid ""
13389"Poll the NNTP servers for messages to be gatewayed to mailing lists.\n"
13390"\n"
13391"Usage: gate_news [options]\n"
13392"\n"
13393"Where options are\n"
13394"\n"
13395"    --help\n"
13396"    -h\n"
13397"        Print this text and exit.\n"
13398"\n"
13399msgstr ""
13400
13401#: cron/mailpasswds:19
13402msgid ""
13403"Send password reminders for all lists to all users.\n"
13404"\n"
13405"This program scans all mailing lists and collects users and their "
13406"passwords,\n"
13407"grouped by the list's host_name if mm_cfg.VIRTUAL_HOST_OVERVIEW is true.  "
13408"Then\n"
13409"one email message is sent to each unique user (per-virtual host) containing\n"
13410"the list passwords and options url for the user.  The password reminder "
13411"comes\n"
13412"from the mm_cfg.MAILMAN_SITE_LIST, which must exist.\n"
13413"\n"
13414"Usage: %(PROGRAM)s [options]\n"
13415"\n"
13416"Options:\n"
13417"    -l listname\n"
13418"    --listname=listname\n"
13419"        Send password reminders for the named list only.  If omitted,\n"
13420"        reminders are sent for all lists.  Multiple -l/--listname options "
13421"are\n"
13422"        allowed.\n"
13423"\n"
13424"    -h/--help\n"
13425"        Print this message and exit.\n"
13426msgstr ""
13427
13428#: cron/mailpasswds:216
13429msgid "Password // URL"
13430msgstr "Password // URL"
13431
13432#: cron/mailpasswds:222
13433msgid "%(host)s mailing list memberships reminder"
13434msgstr "%(host)s mailing list memberships reminder"
13435
13436#: cron/nightly_gzip:19
13437msgid ""
13438"Re-generate the Pipermail gzip'd archive flat files.\n"
13439"\n"
13440"This script should be run nightly from cron.  When run from the command "
13441"line,\n"
13442"the following usage is understood:\n"
13443"\n"
13444"Usage: %(program)s [-v] [-h] [listnames]\n"
13445"\n"
13446"Where:\n"
13447"    --verbose\n"
13448"    -v\n"
13449"        print each file as it's being gzip'd\n"
13450"\n"
13451"    --help\n"
13452"    -h\n"
13453"        print this message and exit\n"
13454"\n"
13455"    listnames\n"
13456"        Optionally, only compress the .txt files for the named lists.  "
13457"Without \n"
13458"        this, all archivable lists are processed.\n"
13459"\n"
13460msgstr ""
13461
13462#: cron/senddigests:20
13463msgid ""
13464"Dispatch digests for lists w/pending messages and digest_send_periodic set.\n"
13465"\n"
13466"Usage: %(PROGRAM)s [options]\n"
13467"\n"
13468"Options:\n"
13469"    -h / --help\n"
13470"        Print this message and exit.\n"
13471"\n"
13472"    -l listname\n"
13473"    --listname=listname\n"
13474"        Send the digest for the given list only, otherwise the digests for "
13475"all\n"
13476"        lists are sent out.  May be repeated to do multiple lists.\n"
13477"\n"
13478"    -e listname\n"
13479"    --exceptlist listname\n"
13480"        Don't send the digest for the given list.  May be repeated to skip\n"
13481"        multiple lists.\n"
13482msgstr ""
13483
13484#, fuzzy
13485#~ msgid "Successfully unsubscribed:"
13486#~ msgstr "����������� ��������:"
13487
13488#~ msgid "The message headers matched a filter rule"
13489#~ msgstr "�� ������������ ��� ��������� ��������� �� ��� ������ �������"
13490
13491#, fuzzy
13492#~ msgid ""
13493#~ "Replace the sender with the list address to conform with\n"
13494#~ "             policies like ADSP and DMARC.  It replaces the poster's\n"
13495#~ "             address in the From: header with the list address and adds "
13496#~ "the\n"
13497#~ "             poster to the Reply-To: header, but the anonymous_list and\n"
13498#~ "             Reply-To: header munging settings below take priority.  If\n"
13499#~ "             setting this to Yes, it is advised to set the MTA to DKIM "
13500#~ "sign\n"
13501#~ "             all emails."
13502#~ msgstr ""
13503#~ "�������������� ��� ��������� �� �� ��������� ��� ������, ������� �� "
13504#~ "���������� ADSP ��� DMARC. ����������� �� ��������� ��������� ��� "
13505#~ "��������: �� �� ��������� ������ ��� ��������� ��� ��������� ��� "
13506#~ "�������������-��:, ���� �� ����� anonymous_list ��� ��������-��: "
13507#~ "������������������. �� ��������� ���, ����������� �� ������ �� ��� ���� "
13508#~ "������������ ���� DKIM ��� �� ��������."
13509
13510#, fuzzy
13511#~ msgid ""
13512#~ "<p>If <a\n"
13513#~ "             href=\"?VARHELP=privacy/sender/dmarc_moderation_action\">\n"
13514#~ "             dmarc_moderation_action</a> applies to this message with an\n"
13515#~ "             action other than Accept, that action rather than this is\n"
13516#~ "             applied"
13517#~ msgstr ""
13518#~ "������� ��� �� ����������������� �� ����\n"
13519#~ "             <a href=\"?VARHELP/privacy/sender/member_moderation_action"
13520#~ "\"\n"
13521#~ "             >���������� ��������� </a> ���\n"
13522#~ "             ��������� ��� ���������� ��� ���������� ���� �� ����� "
13523#~ "�������� �������� �' ���� ��� �����."
13524
13525#~ msgid ""
13526#~ "\n"
13527#~ "    who\n"
13528#~ "        See everyone who is on this mailing list.\n"
13529#~ msgstr ""
13530#~ "\n"
13531#~ "    who\n"
13532#~ "        ����� ����� ���� �������������� �� ���� �� �����.\n"
13533