1# Makefile.in generated by automake 1.11.6 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
6# Foundation, Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18VPATH = @srcdir@
19am__make_dryrun = \
20  { \
21    am__dry=no; \
22    case $$MAKEFLAGS in \
23      *\\[\ \	]*) \
24        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
25          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
26      *) \
27        for am__flg in $$MAKEFLAGS; do \
28          case $$am__flg in \
29            *=*|--*) ;; \
30            *n*) am__dry=yes; break;; \
31          esac; \
32        done;; \
33    esac; \
34    test $$am__dry = yes; \
35  }
36pkgdatadir = $(datadir)/@PACKAGE@
37pkgincludedir = $(includedir)/@PACKAGE@
38pkglibdir = $(libdir)/@PACKAGE@
39pkglibexecdir = $(libexecdir)/@PACKAGE@
40am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
41install_sh_DATA = $(install_sh) -c -m 644
42install_sh_PROGRAM = $(install_sh) -c
43install_sh_SCRIPT = $(install_sh) -c
44INSTALL_HEADER = $(INSTALL_DATA)
45transform = $(program_transform_name)
46NORMAL_INSTALL = :
47PRE_INSTALL = :
48POST_INSTALL = :
49NORMAL_UNINSTALL = :
50PRE_UNINSTALL = :
51POST_UNINSTALL = :
52build_triplet = @build@
53host_triplet = @host@
54target_triplet = @target@
55subdir = src/quvi-0.9
56DIST_COMMON = $(libquviinclude_HEADERS) $(srcdir)/Makefile.am \
57	$(srcdir)/Makefile.in
58ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
59am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
60	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
61	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
62	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
63	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
64	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
65	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
66	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/version.m4 \
67	$(top_srcdir)/configure.ac
68am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
69	$(ACLOCAL_M4)
70mkinstalldirs = $(install_sh) -d
71CONFIG_HEADER = $(top_builddir)/config.h
72CONFIG_CLEAN_FILES =
73CONFIG_CLEAN_VPATH_FILES =
74AM_V_GEN = $(am__v_GEN_@AM_V@)
75am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
76am__v_GEN_0 = @echo "  GEN   " $@;
77AM_V_at = $(am__v_at_@AM_V@)
78am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
79am__v_at_0 = @
80SOURCES =
81DIST_SOURCES =
82RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
83	html-recursive info-recursive install-data-recursive \
84	install-dvi-recursive install-exec-recursive \
85	install-html-recursive install-info-recursive \
86	install-pdf-recursive install-ps-recursive install-recursive \
87	installcheck-recursive installdirs-recursive pdf-recursive \
88	ps-recursive uninstall-recursive
89am__can_run_installinfo = \
90  case $$AM_UPDATE_INFO_DIR in \
91    n|no|NO) false;; \
92    *) (install-info --version) >/dev/null 2>&1;; \
93  esac
94am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
95am__vpath_adj = case $$p in \
96    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
97    *) f=$$p;; \
98  esac;
99am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
100am__install_max = 40
101am__nobase_strip_setup = \
102  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
103am__nobase_strip = \
104  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
105am__nobase_list = $(am__nobase_strip_setup); \
106  for p in $$list; do echo "$$p $$p"; done | \
107  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
108  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
109    if (++n[$$2] == $(am__install_max)) \
110      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
111    END { for (dir in files) print dir, files[dir] }'
112am__base_list = \
113  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
114  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
115am__uninstall_files_from_dir = { \
116  test -z "$$files" \
117    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
118    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
119         $(am__cd) "$$dir" && rm -f $$files; }; \
120  }
121am__installdirs = "$(DESTDIR)$(libquviincludedir)"
122HEADERS = $(libquviinclude_HEADERS)
123RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
124  distclean-recursive maintainer-clean-recursive
125AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
126	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
127	distdir
128ETAGS = etags
129CTAGS = ctags
130DIST_SUBDIRS = $(SUBDIRS)
131DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
132am__relativize = \
133  dir0=`pwd`; \
134  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
135  sed_rest='s,^[^/]*/*,,'; \
136  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
137  sed_butlast='s,/*[^/]*$$,,'; \
138  while test -n "$$dir1"; do \
139    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
140    if test "$$first" != "."; then \
141      if test "$$first" = ".."; then \
142        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
143        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
144      else \
145        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
146        if test "$$first2" = "$$first"; then \
147          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
148        else \
149          dir2="../$$dir2"; \
150        fi; \
151        dir0="$$dir0"/"$$first"; \
152      fi; \
153    fi; \
154    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
155  done; \
156  reldir="$$dir2"
157A2X = @A2X@
158ACLOCAL = @ACLOCAL@
159AMTAR = @AMTAR@
160AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
161AR = @AR@
162AUTOCONF = @AUTOCONF@
163AUTOHEADER = @AUTOHEADER@
164AUTOMAKE = @AUTOMAKE@
165AWK = @AWK@
166BUILD_TIME = @BUILD_TIME@
167CC = @CC@
168CCDEPMODE = @CCDEPMODE@
169CFLAGS = @CFLAGS@
170CPP = @CPP@
171CPPFLAGS = @CPPFLAGS@
172CYGPATH_W = @CYGPATH_W@
173DATE = @DATE@
174DEFS = @DEFS@
175DEPDIR = @DEPDIR@
176DLLTOOL = @DLLTOOL@
177DOXYGEN = @DOXYGEN@
178DSYMUTIL = @DSYMUTIL@
179DUMPBIN = @DUMPBIN@
180ECHO_C = @ECHO_C@
181ECHO_N = @ECHO_N@
182ECHO_T = @ECHO_T@
183EGREP = @EGREP@
184EXEEXT = @EXEEXT@
185FGREP = @FGREP@
186GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
187GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
188GMSGFMT = @GMSGFMT@
189GMSGFMT_015 = @GMSGFMT_015@
190GREP = @GREP@
191INSTALL = @INSTALL@
192INSTALL_DATA = @INSTALL_DATA@
193INSTALL_PROGRAM = @INSTALL_PROGRAM@
194INSTALL_SCRIPT = @INSTALL_SCRIPT@
195INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
196INTLLIBS = @INTLLIBS@
197INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
198LD = @LD@
199LDFLAGS = @LDFLAGS@
200LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
201LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
202LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
203LIBICONV = @LIBICONV@
204LIBINTL = @LIBINTL@
205LIBOBJS = @LIBOBJS@
206LIBS = @LIBS@
207LIBTOOL = @LIBTOOL@
208LIPO = @LIPO@
209LN_S = @LN_S@
210LTLIBICONV = @LTLIBICONV@
211LTLIBINTL = @LTLIBINTL@
212LTLIBOBJS = @LTLIBOBJS@
213LT_AGE = @LT_AGE@
214LT_CUR = @LT_CUR@
215LT_REV = @LT_REV@
216MAKEINFO = @MAKEINFO@
217MANIFEST_TOOL = @MANIFEST_TOOL@
218MKDIR_P = @MKDIR_P@
219MSGFMT = @MSGFMT@
220MSGFMT_015 = @MSGFMT_015@
221MSGMERGE = @MSGMERGE@
222NM = @NM@
223NMEDIT = @NMEDIT@
224OBJDUMP = @OBJDUMP@
225OBJEXT = @OBJEXT@
226OTOOL = @OTOOL@
227OTOOL64 = @OTOOL64@
228PACKAGE = @PACKAGE@
229PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
230PACKAGE_NAME = @PACKAGE_NAME@
231PACKAGE_STRING = @PACKAGE_STRING@
232PACKAGE_TARNAME = @PACKAGE_TARNAME@
233PACKAGE_URL = @PACKAGE_URL@
234PACKAGE_VERSION = @PACKAGE_VERSION@
235PATH_SEPARATOR = @PATH_SEPARATOR@
236PKG_CONFIG = @PKG_CONFIG@
237PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
238PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
239POSUB = @POSUB@
240RANLIB = @RANLIB@
241SED = @SED@
242SET_MAKE = @SET_MAKE@
243SHELL = @SHELL@
244STRIP = @STRIP@
245USE_NLS = @USE_NLS@
246VALGRIND = @VALGRIND@
247VERSION = @VERSION@
248VN_C = @VN_C@
249XGETTEXT = @XGETTEXT@
250XGETTEXT_015 = @XGETTEXT_015@
251XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
252abs_builddir = @abs_builddir@
253abs_srcdir = @abs_srcdir@
254abs_top_builddir = @abs_top_builddir@
255abs_top_srcdir = @abs_top_srcdir@
256ac_ct_AR = @ac_ct_AR@
257ac_ct_CC = @ac_ct_CC@
258ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
259am__include = @am__include@
260am__leading_dot = @am__leading_dot@
261am__quote = @am__quote@
262am__tar = @am__tar@
263am__untar = @am__untar@
264bindir = @bindir@
265build = @build@
266build_alias = @build_alias@
267build_cpu = @build_cpu@
268build_os = @build_os@
269build_vendor = @build_vendor@
270builddir = @builddir@
271datadir = @datadir@
272datarootdir = @datarootdir@
273docdir = @docdir@
274dvidir = @dvidir@
275exec_prefix = @exec_prefix@
276glib_CFLAGS = @glib_CFLAGS@
277glib_LIBS = @glib_LIBS@
278host = @host@
279host_alias = @host_alias@
280host_cpu = @host_cpu@
281host_os = @host_os@
282host_vendor = @host_vendor@
283htmldir = @htmldir@
284includedir = @includedir@
285infodir = @infodir@
286install_sh = @install_sh@
287libcurl_CFLAGS = @libcurl_CFLAGS@
288libcurl_LIBS = @libcurl_LIBS@
289libdir = @libdir@
290libexecdir = @libexecdir@
291liblua_CFLAGS = @liblua_CFLAGS@
292liblua_LIBS = @liblua_LIBS@
293libproxy_CFLAGS = @libproxy_CFLAGS@
294libproxy_LIBS = @libproxy_LIBS@
295libquvi_scripts_CFLAGS = @libquvi_scripts_CFLAGS@
296libquvi_scripts_LIBS = @libquvi_scripts_LIBS@
297localedir = @localedir@
298localstatedir = @localstatedir@
299mandir = @mandir@
300mkdir_p = @mkdir_p@
301oldincludedir = @oldincludedir@
302pdfdir = @pdfdir@
303prefix = @prefix@
304program_transform_name = @program_transform_name@
305psdir = @psdir@
306sbindir = @sbindir@
307sharedstatedir = @sharedstatedir@
308srcdir = @srcdir@
309sysconfdir = @sysconfdir@
310target = @target@
311target_alias = @target_alias@
312target_cpu = @target_cpu@
313target_os = @target_os@
314target_vendor = @target_vendor@
315top_build_prefix = @top_build_prefix@
316top_builddir = @top_builddir@
317top_srcdir = @top_srcdir@
318SUBDIRS = quvi
319libquviincludedir = $(includedir)/quvi-0.9
320libquviinclude_HEADERS = quvi.h
321all: all-recursive
322
323.SUFFIXES:
324$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
325	@for dep in $?; do \
326	  case '$(am__configure_deps)' in \
327	    *$$dep*) \
328	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
329	        && { if test -f $@; then exit 0; else break; fi; }; \
330	      exit 1;; \
331	  esac; \
332	done; \
333	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/quvi-0.9/Makefile'; \
334	$(am__cd) $(top_srcdir) && \
335	  $(AUTOMAKE) --gnu src/quvi-0.9/Makefile
336.PRECIOUS: Makefile
337Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
338	@case '$?' in \
339	  *config.status*) \
340	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
341	  *) \
342	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
343	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
344	esac;
345
346$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
347	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
348
349$(top_srcdir)/configure:  $(am__configure_deps)
350	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
351$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
352	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
353$(am__aclocal_m4_deps):
354
355mostlyclean-libtool:
356	-rm -f *.lo
357
358clean-libtool:
359	-rm -rf .libs _libs
360install-libquviincludeHEADERS: $(libquviinclude_HEADERS)
361	@$(NORMAL_INSTALL)
362	@list='$(libquviinclude_HEADERS)'; test -n "$(libquviincludedir)" || list=; \
363	if test -n "$$list"; then \
364	  echo " $(MKDIR_P) '$(DESTDIR)$(libquviincludedir)'"; \
365	  $(MKDIR_P) "$(DESTDIR)$(libquviincludedir)" || exit 1; \
366	fi; \
367	for p in $$list; do \
368	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
369	  echo "$$d$$p"; \
370	done | $(am__base_list) | \
371	while read files; do \
372	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libquviincludedir)'"; \
373	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libquviincludedir)" || exit $$?; \
374	done
375
376uninstall-libquviincludeHEADERS:
377	@$(NORMAL_UNINSTALL)
378	@list='$(libquviinclude_HEADERS)'; test -n "$(libquviincludedir)" || list=; \
379	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
380	dir='$(DESTDIR)$(libquviincludedir)'; $(am__uninstall_files_from_dir)
381
382# This directory's subdirectories are mostly independent; you can cd
383# into them and run `make' without going through this Makefile.
384# To change the values of `make' variables: instead of editing Makefiles,
385# (1) if the variable is set in `config.status', edit `config.status'
386#     (which will cause the Makefiles to be regenerated when you run `make');
387# (2) otherwise, pass the desired values on the `make' command line.
388$(RECURSIVE_TARGETS):
389	@fail= failcom='exit 1'; \
390	for f in x $$MAKEFLAGS; do \
391	  case $$f in \
392	    *=* | --[!k]*);; \
393	    *k*) failcom='fail=yes';; \
394	  esac; \
395	done; \
396	dot_seen=no; \
397	target=`echo $@ | sed s/-recursive//`; \
398	list='$(SUBDIRS)'; for subdir in $$list; do \
399	  echo "Making $$target in $$subdir"; \
400	  if test "$$subdir" = "."; then \
401	    dot_seen=yes; \
402	    local_target="$$target-am"; \
403	  else \
404	    local_target="$$target"; \
405	  fi; \
406	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
407	  || eval $$failcom; \
408	done; \
409	if test "$$dot_seen" = "no"; then \
410	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
411	fi; test -z "$$fail"
412
413$(RECURSIVE_CLEAN_TARGETS):
414	@fail= failcom='exit 1'; \
415	for f in x $$MAKEFLAGS; do \
416	  case $$f in \
417	    *=* | --[!k]*);; \
418	    *k*) failcom='fail=yes';; \
419	  esac; \
420	done; \
421	dot_seen=no; \
422	case "$@" in \
423	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
424	  *) list='$(SUBDIRS)' ;; \
425	esac; \
426	rev=''; for subdir in $$list; do \
427	  if test "$$subdir" = "."; then :; else \
428	    rev="$$subdir $$rev"; \
429	  fi; \
430	done; \
431	rev="$$rev ."; \
432	target=`echo $@ | sed s/-recursive//`; \
433	for subdir in $$rev; do \
434	  echo "Making $$target in $$subdir"; \
435	  if test "$$subdir" = "."; then \
436	    local_target="$$target-am"; \
437	  else \
438	    local_target="$$target"; \
439	  fi; \
440	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
441	  || eval $$failcom; \
442	done && test -z "$$fail"
443tags-recursive:
444	list='$(SUBDIRS)'; for subdir in $$list; do \
445	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
446	done
447ctags-recursive:
448	list='$(SUBDIRS)'; for subdir in $$list; do \
449	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
450	done
451
452ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
453	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
454	unique=`for i in $$list; do \
455	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
456	  done | \
457	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
458	      END { if (nonempty) { for (i in files) print i; }; }'`; \
459	mkid -fID $$unique
460tags: TAGS
461
462TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
463		$(TAGS_FILES) $(LISP)
464	set x; \
465	here=`pwd`; \
466	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
467	  include_option=--etags-include; \
468	  empty_fix=.; \
469	else \
470	  include_option=--include; \
471	  empty_fix=; \
472	fi; \
473	list='$(SUBDIRS)'; for subdir in $$list; do \
474	  if test "$$subdir" = .; then :; else \
475	    test ! -f $$subdir/TAGS || \
476	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
477	  fi; \
478	done; \
479	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
480	unique=`for i in $$list; do \
481	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
482	  done | \
483	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
484	      END { if (nonempty) { for (i in files) print i; }; }'`; \
485	shift; \
486	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
487	  test -n "$$unique" || unique=$$empty_fix; \
488	  if test $$# -gt 0; then \
489	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
490	      "$$@" $$unique; \
491	  else \
492	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
493	      $$unique; \
494	  fi; \
495	fi
496ctags: CTAGS
497CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
498		$(TAGS_FILES) $(LISP)
499	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
500	unique=`for i in $$list; do \
501	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
502	  done | \
503	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
504	      END { if (nonempty) { for (i in files) print i; }; }'`; \
505	test -z "$(CTAGS_ARGS)$$unique" \
506	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
507	     $$unique
508
509GTAGS:
510	here=`$(am__cd) $(top_builddir) && pwd` \
511	  && $(am__cd) $(top_srcdir) \
512	  && gtags -i $(GTAGS_ARGS) "$$here"
513
514distclean-tags:
515	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
516
517distdir: $(DISTFILES)
518	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
519	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
520	list='$(DISTFILES)'; \
521	  dist_files=`for file in $$list; do echo $$file; done | \
522	  sed -e "s|^$$srcdirstrip/||;t" \
523	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
524	case $$dist_files in \
525	  */*) $(MKDIR_P) `echo "$$dist_files" | \
526			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
527			   sort -u` ;; \
528	esac; \
529	for file in $$dist_files; do \
530	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
531	  if test -d $$d/$$file; then \
532	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
533	    if test -d "$(distdir)/$$file"; then \
534	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
535	    fi; \
536	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
537	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
538	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
539	    fi; \
540	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
541	  else \
542	    test -f "$(distdir)/$$file" \
543	    || cp -p $$d/$$file "$(distdir)/$$file" \
544	    || exit 1; \
545	  fi; \
546	done
547	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
548	  if test "$$subdir" = .; then :; else \
549	    $(am__make_dryrun) \
550	      || test -d "$(distdir)/$$subdir" \
551	      || $(MKDIR_P) "$(distdir)/$$subdir" \
552	      || exit 1; \
553	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
554	    $(am__relativize); \
555	    new_distdir=$$reldir; \
556	    dir1=$$subdir; dir2="$(top_distdir)"; \
557	    $(am__relativize); \
558	    new_top_distdir=$$reldir; \
559	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
560	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
561	    ($(am__cd) $$subdir && \
562	      $(MAKE) $(AM_MAKEFLAGS) \
563	        top_distdir="$$new_top_distdir" \
564	        distdir="$$new_distdir" \
565		am__remove_distdir=: \
566		am__skip_length_check=: \
567		am__skip_mode_fix=: \
568	        distdir) \
569	      || exit 1; \
570	  fi; \
571	done
572check-am: all-am
573check: check-recursive
574all-am: Makefile $(HEADERS)
575installdirs: installdirs-recursive
576installdirs-am:
577	for dir in "$(DESTDIR)$(libquviincludedir)"; do \
578	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
579	done
580install: install-recursive
581install-exec: install-exec-recursive
582install-data: install-data-recursive
583uninstall: uninstall-recursive
584
585install-am: all-am
586	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
587
588installcheck: installcheck-recursive
589install-strip:
590	if test -z '$(STRIP)'; then \
591	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
592	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
593	      install; \
594	else \
595	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
596	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
597	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
598	fi
599mostlyclean-generic:
600
601clean-generic:
602
603distclean-generic:
604	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
605	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
606
607maintainer-clean-generic:
608	@echo "This command is intended for maintainers to use"
609	@echo "it deletes files that may require special tools to rebuild."
610clean: clean-recursive
611
612clean-am: clean-generic clean-libtool mostlyclean-am
613
614distclean: distclean-recursive
615	-rm -f Makefile
616distclean-am: clean-am distclean-generic distclean-tags
617
618dvi: dvi-recursive
619
620dvi-am:
621
622html: html-recursive
623
624html-am:
625
626info: info-recursive
627
628info-am:
629
630install-data-am: install-libquviincludeHEADERS
631
632install-dvi: install-dvi-recursive
633
634install-dvi-am:
635
636install-exec-am:
637
638install-html: install-html-recursive
639
640install-html-am:
641
642install-info: install-info-recursive
643
644install-info-am:
645
646install-man:
647
648install-pdf: install-pdf-recursive
649
650install-pdf-am:
651
652install-ps: install-ps-recursive
653
654install-ps-am:
655
656installcheck-am:
657
658maintainer-clean: maintainer-clean-recursive
659	-rm -f Makefile
660maintainer-clean-am: distclean-am maintainer-clean-generic
661
662mostlyclean: mostlyclean-recursive
663
664mostlyclean-am: mostlyclean-generic mostlyclean-libtool
665
666pdf: pdf-recursive
667
668pdf-am:
669
670ps: ps-recursive
671
672ps-am:
673
674uninstall-am: uninstall-libquviincludeHEADERS
675
676.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
677	install-am install-strip tags-recursive
678
679.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
680	all all-am check check-am clean clean-generic clean-libtool \
681	ctags ctags-recursive distclean distclean-generic \
682	distclean-libtool distclean-tags distdir dvi dvi-am html \
683	html-am info info-am install install-am install-data \
684	install-data-am install-dvi install-dvi-am install-exec \
685	install-exec-am install-html install-html-am install-info \
686	install-info-am install-libquviincludeHEADERS install-man \
687	install-pdf install-pdf-am install-ps install-ps-am \
688	install-strip installcheck installcheck-am installdirs \
689	installdirs-am maintainer-clean maintainer-clean-generic \
690	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
691	ps ps-am tags tags-recursive uninstall uninstall-am \
692	uninstall-libquviincludeHEADERS
693
694
695# vim: set ts=2 sw=2 tw=72 expandtab:
696
697# Tell versions [3.59,3.63) of GNU make to not export all variables.
698# Otherwise a system limit (for SysV at least) may be exceeded.
699.NOEXPORT:
700