1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *	linux/arch/alpha/kernel/sys_dp264.c
4  *
5  *	Copyright (C) 1995 David A Rusling
6  *	Copyright (C) 1996, 1999 Jay A Estabrook
7  *	Copyright (C) 1998, 1999 Richard Henderson
8  *
9  *	Modified by Christopher C. Chimelis, 2001 to
10  *	add support for the addition of Shark to the
11  *	Tsunami family.
12  *
13  * Code supporting the DP264 (EV6+TSUNAMI).
14  */
15 
16 #include <linux/kernel.h>
17 #include <linux/types.h>
18 #include <linux/mm.h>
19 #include <linux/sched.h>
20 #include <linux/pci.h>
21 #include <linux/init.h>
22 #include <linux/bitops.h>
23 
24 #include <asm/ptrace.h>
25 #include <asm/dma.h>
26 #include <asm/irq.h>
27 #include <asm/mmu_context.h>
28 #include <asm/io.h>
29 #include <asm/core_tsunami.h>
30 #include <asm/hwrpb.h>
31 #include <asm/tlbflush.h>
32 
33 #include "proto.h"
34 #include "irq_impl.h"
35 #include "pci_impl.h"
36 #include "machvec_impl.h"
37 
38 
39 /* Note mask bit is true for ENABLED irqs.  */
40 static unsigned long cached_irq_mask;
41 /* dp264 boards handle at max four CPUs */
42 static unsigned long cpu_irq_affinity[4] = { 0UL, 0UL, 0UL, 0UL };
43 
44 DEFINE_SPINLOCK(dp264_irq_lock);
45 
46 static void
tsunami_update_irq_hw(unsigned long mask)47 tsunami_update_irq_hw(unsigned long mask)
48 {
49 	register tsunami_cchip *cchip = TSUNAMI_cchip;
50 	unsigned long isa_enable = 1UL << 55;
51 	register int bcpu = boot_cpuid;
52 
53 #ifdef CONFIG_SMP
54 	volatile unsigned long *dim0, *dim1, *dim2, *dim3;
55 	unsigned long mask0, mask1, mask2, mask3, dummy;
56 
57 	mask &= ~isa_enable;
58 	mask0 = mask & cpu_irq_affinity[0];
59 	mask1 = mask & cpu_irq_affinity[1];
60 	mask2 = mask & cpu_irq_affinity[2];
61 	mask3 = mask & cpu_irq_affinity[3];
62 
63 	if (bcpu == 0) mask0 |= isa_enable;
64 	else if (bcpu == 1) mask1 |= isa_enable;
65 	else if (bcpu == 2) mask2 |= isa_enable;
66 	else mask3 |= isa_enable;
67 
68 	dim0 = &cchip->dim0.csr;
69 	dim1 = &cchip->dim1.csr;
70 	dim2 = &cchip->dim2.csr;
71 	dim3 = &cchip->dim3.csr;
72 	if (!cpu_possible(0)) dim0 = &dummy;
73 	if (!cpu_possible(1)) dim1 = &dummy;
74 	if (!cpu_possible(2)) dim2 = &dummy;
75 	if (!cpu_possible(3)) dim3 = &dummy;
76 
77 	*dim0 = mask0;
78 	*dim1 = mask1;
79 	*dim2 = mask2;
80 	*dim3 = mask3;
81 	mb();
82 	*dim0;
83 	*dim1;
84 	*dim2;
85 	*dim3;
86 #else
87 	volatile unsigned long *dimB;
88 	if (bcpu == 0) dimB = &cchip->dim0.csr;
89 	else if (bcpu == 1) dimB = &cchip->dim1.csr;
90 	else if (bcpu == 2) dimB = &cchip->dim2.csr;
91 	else dimB = &cchip->dim3.csr;
92 
93 	*dimB = mask | isa_enable;
94 	mb();
95 	*dimB;
96 #endif
97 }
98 
99 static void
dp264_enable_irq(struct irq_data * d)100 dp264_enable_irq(struct irq_data *d)
101 {
102 	spin_lock(&dp264_irq_lock);
103 	cached_irq_mask |= 1UL << d->irq;
104 	tsunami_update_irq_hw(cached_irq_mask);
105 	spin_unlock(&dp264_irq_lock);
106 }
107 
108 static void
dp264_disable_irq(struct irq_data * d)109 dp264_disable_irq(struct irq_data *d)
110 {
111 	spin_lock(&dp264_irq_lock);
112 	cached_irq_mask &= ~(1UL << d->irq);
113 	tsunami_update_irq_hw(cached_irq_mask);
114 	spin_unlock(&dp264_irq_lock);
115 }
116 
117 static void
clipper_enable_irq(struct irq_data * d)118 clipper_enable_irq(struct irq_data *d)
119 {
120 	spin_lock(&dp264_irq_lock);
121 	cached_irq_mask |= 1UL << (d->irq - 16);
122 	tsunami_update_irq_hw(cached_irq_mask);
123 	spin_unlock(&dp264_irq_lock);
124 }
125 
126 static void
clipper_disable_irq(struct irq_data * d)127 clipper_disable_irq(struct irq_data *d)
128 {
129 	spin_lock(&dp264_irq_lock);
130 	cached_irq_mask &= ~(1UL << (d->irq - 16));
131 	tsunami_update_irq_hw(cached_irq_mask);
132 	spin_unlock(&dp264_irq_lock);
133 }
134 
135 static void
cpu_set_irq_affinity(unsigned int irq,cpumask_t affinity)136 cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
137 {
138 	int cpu;
139 
140 	for (cpu = 0; cpu < 4; cpu++) {
141 		unsigned long aff = cpu_irq_affinity[cpu];
142 		if (cpumask_test_cpu(cpu, &affinity))
143 			aff |= 1UL << irq;
144 		else
145 			aff &= ~(1UL << irq);
146 		cpu_irq_affinity[cpu] = aff;
147 	}
148 }
149 
150 static int
dp264_set_affinity(struct irq_data * d,const struct cpumask * affinity,bool force)151 dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity,
152 		   bool force)
153 {
154 	spin_lock(&dp264_irq_lock);
155 	cpu_set_irq_affinity(d->irq, *affinity);
156 	tsunami_update_irq_hw(cached_irq_mask);
157 	spin_unlock(&dp264_irq_lock);
158 
159 	return 0;
160 }
161 
162 static int
clipper_set_affinity(struct irq_data * d,const struct cpumask * affinity,bool force)163 clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity,
164 		     bool force)
165 {
166 	spin_lock(&dp264_irq_lock);
167 	cpu_set_irq_affinity(d->irq - 16, *affinity);
168 	tsunami_update_irq_hw(cached_irq_mask);
169 	spin_unlock(&dp264_irq_lock);
170 
171 	return 0;
172 }
173 
174 static struct irq_chip dp264_irq_type = {
175 	.name			= "DP264",
176 	.irq_unmask		= dp264_enable_irq,
177 	.irq_mask		= dp264_disable_irq,
178 	.irq_mask_ack		= dp264_disable_irq,
179 	.irq_set_affinity	= dp264_set_affinity,
180 };
181 
182 static struct irq_chip clipper_irq_type = {
183 	.name			= "CLIPPER",
184 	.irq_unmask		= clipper_enable_irq,
185 	.irq_mask		= clipper_disable_irq,
186 	.irq_mask_ack		= clipper_disable_irq,
187 	.irq_set_affinity	= clipper_set_affinity,
188 };
189 
190 static void
dp264_device_interrupt(unsigned long vector)191 dp264_device_interrupt(unsigned long vector)
192 {
193 	unsigned long pld;
194 	unsigned int i;
195 
196 	/* Read the interrupt summary register of TSUNAMI */
197 	pld = TSUNAMI_cchip->dir0.csr;
198 
199 	/*
200 	 * Now for every possible bit set, work through them and call
201 	 * the appropriate interrupt handler.
202 	 */
203 	while (pld) {
204 		i = ffz(~pld);
205 		pld &= pld - 1; /* clear least bit set */
206 		if (i == 55)
207 			isa_device_interrupt(vector);
208 		else
209 			handle_irq(16 + i);
210 	}
211 }
212 
213 static void
dp264_srm_device_interrupt(unsigned long vector)214 dp264_srm_device_interrupt(unsigned long vector)
215 {
216 	int irq;
217 
218 	irq = (vector - 0x800) >> 4;
219 
220 	/*
221 	 * The SRM console reports PCI interrupts with a vector calculated by:
222 	 *
223 	 *	0x900 + (0x10 * DRIR-bit)
224 	 *
225 	 * So bit 16 shows up as IRQ 32, etc.
226 	 *
227 	 * On DP264/BRICK/MONET, we adjust it down by 16 because at least
228 	 * that many of the low order bits of the DRIR are not used, and
229 	 * so we don't count them.
230 	 */
231 	if (irq >= 32)
232 		irq -= 16;
233 
234 	handle_irq(irq);
235 }
236 
237 static void
clipper_srm_device_interrupt(unsigned long vector)238 clipper_srm_device_interrupt(unsigned long vector)
239 {
240 	int irq;
241 
242 	irq = (vector - 0x800) >> 4;
243 
244 /*
245 	 * The SRM console reports PCI interrupts with a vector calculated by:
246 	 *
247 	 *	0x900 + (0x10 * DRIR-bit)
248 	 *
249 	 * So bit 16 shows up as IRQ 32, etc.
250 	 *
251 	 * CLIPPER uses bits 8-47 for PCI interrupts, so we do not need
252 	 * to scale down the vector reported, we just use it.
253 	 *
254 	 * Eg IRQ 24 is DRIR bit 8, etc, etc
255 	 */
256 	handle_irq(irq);
257 }
258 
259 static void __init
init_tsunami_irqs(struct irq_chip * ops,int imin,int imax)260 init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
261 {
262 	long i;
263 	for (i = imin; i <= imax; ++i) {
264 		irq_set_chip_and_handler(i, ops, handle_level_irq);
265 		irq_set_status_flags(i, IRQ_LEVEL);
266 	}
267 }
268 
269 static void __init
dp264_init_irq(void)270 dp264_init_irq(void)
271 {
272 	outb(0, DMA1_RESET_REG);
273 	outb(0, DMA2_RESET_REG);
274 	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
275 	outb(0, DMA2_MASK_REG);
276 
277 	if (alpha_using_srm)
278 		alpha_mv.device_interrupt = dp264_srm_device_interrupt;
279 
280 	tsunami_update_irq_hw(0);
281 
282 	init_i8259a_irqs();
283 	init_tsunami_irqs(&dp264_irq_type, 16, 47);
284 }
285 
286 static void __init
clipper_init_irq(void)287 clipper_init_irq(void)
288 {
289 	outb(0, DMA1_RESET_REG);
290 	outb(0, DMA2_RESET_REG);
291 	outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
292 	outb(0, DMA2_MASK_REG);
293 
294 	if (alpha_using_srm)
295 		alpha_mv.device_interrupt = clipper_srm_device_interrupt;
296 
297 	tsunami_update_irq_hw(0);
298 
299 	init_i8259a_irqs();
300 	init_tsunami_irqs(&clipper_irq_type, 24, 63);
301 }
302 
303 
304 /*
305  * PCI Fixup configuration.
306  *
307  * Summary @ TSUNAMI_CSR_DIM0:
308  * Bit      Meaning
309  * 0-17     Unused
310  *18        Interrupt SCSI B (Adaptec 7895 builtin)
311  *19        Interrupt SCSI A (Adaptec 7895 builtin)
312  *20        Interrupt Line D from slot 2 PCI0
313  *21        Interrupt Line C from slot 2 PCI0
314  *22        Interrupt Line B from slot 2 PCI0
315  *23        Interrupt Line A from slot 2 PCI0
316  *24        Interrupt Line D from slot 1 PCI0
317  *25        Interrupt Line C from slot 1 PCI0
318  *26        Interrupt Line B from slot 1 PCI0
319  *27        Interrupt Line A from slot 1 PCI0
320  *28        Interrupt Line D from slot 0 PCI0
321  *29        Interrupt Line C from slot 0 PCI0
322  *30        Interrupt Line B from slot 0 PCI0
323  *31        Interrupt Line A from slot 0 PCI0
324  *
325  *32        Interrupt Line D from slot 3 PCI1
326  *33        Interrupt Line C from slot 3 PCI1
327  *34        Interrupt Line B from slot 3 PCI1
328  *35        Interrupt Line A from slot 3 PCI1
329  *36        Interrupt Line D from slot 2 PCI1
330  *37        Interrupt Line C from slot 2 PCI1
331  *38        Interrupt Line B from slot 2 PCI1
332  *39        Interrupt Line A from slot 2 PCI1
333  *40        Interrupt Line D from slot 1 PCI1
334  *41        Interrupt Line C from slot 1 PCI1
335  *42        Interrupt Line B from slot 1 PCI1
336  *43        Interrupt Line A from slot 1 PCI1
337  *44        Interrupt Line D from slot 0 PCI1
338  *45        Interrupt Line C from slot 0 PCI1
339  *46        Interrupt Line B from slot 0 PCI1
340  *47        Interrupt Line A from slot 0 PCI1
341  *48-52     Unused
342  *53        PCI0 NMI (from Cypress)
343  *54        PCI0 SMI INT (from Cypress)
344  *55        PCI0 ISA Interrupt (from Cypress)
345  *56-60     Unused
346  *61        PCI1 Bus Error
347  *62        PCI0 Bus Error
348  *63        Reserved
349  *
350  * IdSel
351  *   5	 Cypress Bridge I/O
352  *   6	 SCSI Adaptec builtin
353  *   7	 64 bit PCI option slot 0 (all busses)
354  *   8	 64 bit PCI option slot 1 (all busses)
355  *   9	 64 bit PCI option slot 2 (all busses)
356  *  10	 64 bit PCI option slot 3 (not bus 0)
357  */
358 
359 static int
isa_irq_fixup(const struct pci_dev * dev,int irq)360 isa_irq_fixup(const struct pci_dev *dev, int irq)
361 {
362 	u8 irq8;
363 
364 	if (irq > 0)
365 		return irq;
366 
367 	/* This interrupt is routed via ISA bridge, so we'll
368 	   just have to trust whatever value the console might
369 	   have assigned.  */
370 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
371 
372 	return irq8 & 0xf;
373 }
374 
375 static int
dp264_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)376 dp264_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
377 {
378 	static char irq_tab[6][5] = {
379 		/*INT    INTA   INTB   INTC   INTD */
380 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 5 ISA Bridge */
381 		{ 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/
382 		{ 16+15, 16+15, 16+14, 16+13, 16+12}, /* IdSel 7 slot 0 */
383 		{ 16+11, 16+11, 16+10, 16+ 9, 16+ 8}, /* IdSel 8 slot 1 */
384 		{ 16+ 7, 16+ 7, 16+ 6, 16+ 5, 16+ 4}, /* IdSel 9 slot 2 */
385 		{ 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0}  /* IdSel 10 slot 3 */
386 	};
387 	const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
388 	struct pci_controller *hose = dev->sysdata;
389 	int irq = COMMON_TABLE_LOOKUP;
390 
391 	if (irq > 0)
392 		irq += 16 * hose->index;
393 
394 	return isa_irq_fixup(dev, irq);
395 }
396 
397 static int
monet_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)398 monet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
399 {
400 	static char irq_tab[13][5] = {
401 		/*INT    INTA   INTB   INTC   INTD */
402 		{    45,    45,    45,    45,    45}, /* IdSel 3 21143 PCI1 */
403 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 4 unused */
404 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 5 unused */
405 		{    47,    47,    47,    47,    47}, /* IdSel 6 SCSI PCI1 */
406 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 7 ISA Bridge */
407 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 8 P2P PCI1 */
408 #if 1
409 		{    28,    28,    29,    30,    31}, /* IdSel 14 slot 4 PCI2*/
410 		{    24,    24,    25,    26,    27}, /* IdSel 15 slot 5 PCI2*/
411 #else
412 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 9 unused */
413 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 10 unused */
414 #endif
415 		{    40,    40,    41,    42,    43}, /* IdSel 11 slot 1 PCI0*/
416 		{    36,    36,    37,    38,    39}, /* IdSel 12 slot 2 PCI0*/
417 		{    32,    32,    33,    34,    35}, /* IdSel 13 slot 3 PCI0*/
418 		{    28,    28,    29,    30,    31}, /* IdSel 14 slot 4 PCI2*/
419 		{    24,    24,    25,    26,    27}  /* IdSel 15 slot 5 PCI2*/
420 	};
421 	const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5;
422 
423 	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
424 }
425 
426 static u8
monet_swizzle(struct pci_dev * dev,u8 * pinp)427 monet_swizzle(struct pci_dev *dev, u8 *pinp)
428 {
429 	struct pci_controller *hose = dev->sysdata;
430 	int slot, pin = *pinp;
431 
432 	if (!dev->bus->parent) {
433 		slot = PCI_SLOT(dev->devfn);
434 	}
435 	/* Check for the built-in bridge on hose 1. */
436 	else if (hose->index == 1 && PCI_SLOT(dev->bus->self->devfn) == 8) {
437 		slot = PCI_SLOT(dev->devfn);
438 	} else {
439 		/* Must be a card-based bridge.  */
440 		do {
441 			/* Check for built-in bridge on hose 1. */
442 			if (hose->index == 1 &&
443 			    PCI_SLOT(dev->bus->self->devfn) == 8) {
444 				slot = PCI_SLOT(dev->devfn);
445 				break;
446 			}
447 			pin = pci_swizzle_interrupt_pin(dev, pin);
448 
449 			/* Move up the chain of bridges.  */
450 			dev = dev->bus->self;
451 			/* Slot of the next bridge.  */
452 			slot = PCI_SLOT(dev->devfn);
453 		} while (dev->bus->self);
454 	}
455 	*pinp = pin;
456 	return slot;
457 }
458 
459 static int
webbrick_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)460 webbrick_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
461 {
462 	static char irq_tab[13][5] = {
463 		/*INT    INTA   INTB   INTC   INTD */
464 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 7 ISA Bridge */
465 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 8 unused */
466 		{    29,    29,    29,    29,    29}, /* IdSel 9 21143 #1 */
467 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 10 unused */
468 		{    30,    30,    30,    30,    30}, /* IdSel 11 21143 #2 */
469 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 12 unused */
470 		{    -1,    -1,    -1,    -1,    -1}, /* IdSel 13 unused */
471 		{    35,    35,    34,    33,    32}, /* IdSel 14 slot 0 */
472 		{    39,    39,    38,    37,    36}, /* IdSel 15 slot 1 */
473 		{    43,    43,    42,    41,    40}, /* IdSel 16 slot 2 */
474 		{    47,    47,    46,    45,    44}, /* IdSel 17 slot 3 */
475 	};
476 	const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5;
477 
478 	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
479 }
480 
481 static int
clipper_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)482 clipper_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
483 {
484 	static char irq_tab[7][5] = {
485 		/*INT    INTA   INTB   INTC   INTD */
486 		{ 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */
487 		{ 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */
488 		{ 16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 3 slot 3 */
489 		{ 16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 4 slot 4 */
490 		{ 16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 5 slot 5 */
491 		{ 16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 6 slot 6 */
492 		{    -1,    -1,    -1,    -1,    -1}  /* IdSel 7 ISA Bridge */
493 	};
494 	const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5;
495 	struct pci_controller *hose = dev->sysdata;
496 	int irq = COMMON_TABLE_LOOKUP;
497 
498 	if (irq > 0)
499 		irq += 16 * hose->index;
500 
501 	return isa_irq_fixup(dev, irq);
502 }
503 
504 static void __init
dp264_init_pci(void)505 dp264_init_pci(void)
506 {
507 	common_init_pci();
508 	SMC669_Init(0);
509 	locate_and_init_vga(NULL);
510 }
511 
512 static void __init
monet_init_pci(void)513 monet_init_pci(void)
514 {
515 	common_init_pci();
516 	SMC669_Init(1);
517 	es1888_init();
518 	locate_and_init_vga(NULL);
519 }
520 
521 static void __init
clipper_init_pci(void)522 clipper_init_pci(void)
523 {
524 	common_init_pci();
525 	locate_and_init_vga(NULL);
526 }
527 
528 static void __init
webbrick_init_arch(void)529 webbrick_init_arch(void)
530 {
531 	tsunami_init_arch();
532 
533 	/* Tsunami caches 4 PTEs at a time; DS10 has only 1 hose. */
534 	hose_head->sg_isa->align_entry = 4;
535 	hose_head->sg_pci->align_entry = 4;
536 }
537 
538 
539 /*
540  * The System Vectors
541  */
542 
543 struct alpha_machine_vector dp264_mv __initmv = {
544 	.vector_name		= "DP264",
545 	DO_EV6_MMU,
546 	DO_DEFAULT_RTC,
547 	DO_TSUNAMI_IO,
548 	.machine_check		= tsunami_machine_check,
549 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
550 	.min_io_address		= DEFAULT_IO_BASE,
551 	.min_mem_address	= DEFAULT_MEM_BASE,
552 	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
553 
554 	.nr_irqs		= 64,
555 	.device_interrupt	= dp264_device_interrupt,
556 
557 	.init_arch		= tsunami_init_arch,
558 	.init_irq		= dp264_init_irq,
559 	.init_rtc		= common_init_rtc,
560 	.init_pci		= dp264_init_pci,
561 	.kill_arch		= tsunami_kill_arch,
562 	.pci_map_irq		= dp264_map_irq,
563 	.pci_swizzle		= common_swizzle,
564 };
565 ALIAS_MV(dp264)
566 
567 struct alpha_machine_vector monet_mv __initmv = {
568 	.vector_name		= "Monet",
569 	DO_EV6_MMU,
570 	DO_DEFAULT_RTC,
571 	DO_TSUNAMI_IO,
572 	.machine_check		= tsunami_machine_check,
573 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
574 	.min_io_address		= DEFAULT_IO_BASE,
575 	.min_mem_address	= DEFAULT_MEM_BASE,
576 	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
577 
578 	.nr_irqs		= 64,
579 	.device_interrupt	= dp264_device_interrupt,
580 
581 	.init_arch		= tsunami_init_arch,
582 	.init_irq		= dp264_init_irq,
583 	.init_rtc		= common_init_rtc,
584 	.init_pci		= monet_init_pci,
585 	.kill_arch		= tsunami_kill_arch,
586 	.pci_map_irq		= monet_map_irq,
587 	.pci_swizzle		= monet_swizzle,
588 };
589 
590 struct alpha_machine_vector webbrick_mv __initmv = {
591 	.vector_name		= "Webbrick",
592 	DO_EV6_MMU,
593 	DO_DEFAULT_RTC,
594 	DO_TSUNAMI_IO,
595 	.machine_check		= tsunami_machine_check,
596 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
597 	.min_io_address		= DEFAULT_IO_BASE,
598 	.min_mem_address	= DEFAULT_MEM_BASE,
599 	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
600 
601 	.nr_irqs		= 64,
602 	.device_interrupt	= dp264_device_interrupt,
603 
604 	.init_arch		= webbrick_init_arch,
605 	.init_irq		= dp264_init_irq,
606 	.init_rtc		= common_init_rtc,
607 	.init_pci		= common_init_pci,
608 	.kill_arch		= tsunami_kill_arch,
609 	.pci_map_irq		= webbrick_map_irq,
610 	.pci_swizzle		= common_swizzle,
611 };
612 
613 struct alpha_machine_vector clipper_mv __initmv = {
614 	.vector_name		= "Clipper",
615 	DO_EV6_MMU,
616 	DO_DEFAULT_RTC,
617 	DO_TSUNAMI_IO,
618 	.machine_check		= tsunami_machine_check,
619 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
620 	.min_io_address		= DEFAULT_IO_BASE,
621 	.min_mem_address	= DEFAULT_MEM_BASE,
622 	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
623 
624 	.nr_irqs		= 64,
625 	.device_interrupt	= dp264_device_interrupt,
626 
627 	.init_arch		= tsunami_init_arch,
628 	.init_irq		= clipper_init_irq,
629 	.init_rtc		= common_init_rtc,
630 	.init_pci		= clipper_init_pci,
631 	.kill_arch		= tsunami_kill_arch,
632 	.pci_map_irq		= clipper_map_irq,
633 	.pci_swizzle		= common_swizzle,
634 };
635 
636 /* Sharks strongly resemble Clipper, at least as far
637  * as interrupt routing, etc, so we're using the
638  * same functions as Clipper does
639  */
640 
641 struct alpha_machine_vector shark_mv __initmv = {
642 	.vector_name		= "Shark",
643 	DO_EV6_MMU,
644 	DO_DEFAULT_RTC,
645 	DO_TSUNAMI_IO,
646 	.machine_check		= tsunami_machine_check,
647 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
648 	.min_io_address		= DEFAULT_IO_BASE,
649 	.min_mem_address	= DEFAULT_MEM_BASE,
650 	.pci_dac_offset		= TSUNAMI_DAC_OFFSET,
651 
652 	.nr_irqs		= 64,
653 	.device_interrupt	= dp264_device_interrupt,
654 
655 	.init_arch		= tsunami_init_arch,
656 	.init_irq		= clipper_init_irq,
657 	.init_rtc		= common_init_rtc,
658 	.init_pci		= common_init_pci,
659 	.kill_arch		= tsunami_kill_arch,
660 	.pci_map_irq		= clipper_map_irq,
661 	.pci_swizzle		= common_swizzle,
662 };
663 
664 /* No alpha_mv alias for webbrick/monet/clipper, since we compile them
665    in unconditionally with DP264; setup_arch knows how to cope.  */
666