1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2//
3// Device Tree file for LX2160ARDB
4//
5// Copyright 2018-2020 NXP
6
7/dts-v1/;
8
9#include "fsl-lx2160a.dtsi"
10
11/ {
12	model = "NXP Layerscape LX2160ARDB";
13	compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
14
15	aliases {
16		crypto = &crypto;
17		mmc0 = &esdhc0;
18		mmc1 = &esdhc1;
19		serial0 = &uart0;
20	};
21
22	chosen {
23		stdout-path = "serial0:115200n8";
24	};
25
26	sb_3v3: regulator-sb3v3 {
27		compatible = "regulator-fixed";
28		regulator-name = "MC34717-3.3VSB";
29		regulator-min-microvolt = <3300000>;
30		regulator-max-microvolt = <3300000>;
31		regulator-boot-on;
32		regulator-always-on;
33	};
34};
35
36&crypto {
37	status = "okay";
38};
39
40&dpmac3 {
41	phy-handle = <&aquantia_phy1>;
42	phy-connection-type = "usxgmii";
43	managed = "in-band-status";
44};
45
46&dpmac4 {
47	phy-handle = <&aquantia_phy2>;
48	phy-connection-type = "usxgmii";
49	managed = "in-band-status";
50};
51
52&dpmac17 {
53	phy-handle = <&rgmii_phy1>;
54	phy-connection-type = "rgmii-id";
55};
56
57&dpmac18 {
58	phy-handle = <&rgmii_phy2>;
59	phy-connection-type = "rgmii-id";
60};
61
62&emdio1 {
63	status = "okay";
64
65	rgmii_phy1: ethernet-phy@1 {
66		/* AR8035 PHY */
67		compatible = "ethernet-phy-id004d.d072";
68		reg = <0x1>;
69		eee-broken-1000t;
70	};
71
72	rgmii_phy2: ethernet-phy@2 {
73		/* AR8035 PHY */
74		compatible = "ethernet-phy-id004d.d072";
75		reg = <0x2>;
76		eee-broken-1000t;
77	};
78
79	aquantia_phy1: ethernet-phy@4 {
80		/* AQR107 PHY */
81		compatible = "ethernet-phy-ieee802.3-c45";
82		reg = <0x4>;
83	};
84
85	aquantia_phy2: ethernet-phy@5 {
86		/* AQR107 PHY */
87		compatible = "ethernet-phy-ieee802.3-c45";
88		reg = <0x5>;
89	};
90};
91
92&can0 {
93	status = "okay";
94
95	can-transceiver {
96		max-bitrate = <5000000>;
97	};
98};
99
100&can1 {
101	status = "okay";
102
103	can-transceiver {
104		max-bitrate = <5000000>;
105	};
106};
107
108&esdhc0 {
109	sd-uhs-sdr104;
110	sd-uhs-sdr50;
111	sd-uhs-sdr25;
112	sd-uhs-sdr12;
113	status = "okay";
114};
115
116&esdhc1 {
117	mmc-hs200-1_8v;
118	mmc-hs400-1_8v;
119	bus-width = <8>;
120	status = "okay";
121};
122
123&fspi {
124	status = "okay";
125
126	mt35xu512aba0: flash@0 {
127		#address-cells = <1>;
128		#size-cells = <1>;
129		compatible = "jedec,spi-nor";
130		m25p,fast-read;
131		spi-max-frequency = <50000000>;
132		reg = <0>;
133		spi-rx-bus-width = <8>;
134		spi-tx-bus-width = <8>;
135	};
136
137	mt35xu512aba1: flash@1 {
138		#address-cells = <1>;
139		#size-cells = <1>;
140		compatible = "jedec,spi-nor";
141		m25p,fast-read;
142		spi-max-frequency = <50000000>;
143		reg = <1>;
144		spi-rx-bus-width = <8>;
145		spi-tx-bus-width = <8>;
146	};
147};
148
149&i2c0 {
150	status = "okay";
151
152	i2c-mux@77 {
153		compatible = "nxp,pca9547";
154		reg = <0x77>;
155		#address-cells = <1>;
156		#size-cells = <0>;
157
158		i2c@2 {
159			#address-cells = <1>;
160			#size-cells = <0>;
161			reg = <0x2>;
162
163			power-monitor@40 {
164				compatible = "ti,ina220";
165				reg = <0x40>;
166				shunt-resistor = <500>;
167			};
168		};
169
170		i2c@3 {
171			#address-cells = <1>;
172			#size-cells = <0>;
173			reg = <0x3>;
174
175			temperature-sensor@4c {
176				compatible = "nxp,sa56004";
177				reg = <0x4c>;
178				vcc-supply = <&sb_3v3>;
179			};
180
181			temperature-sensor@4d {
182				compatible = "nxp,sa56004";
183				reg = <0x4d>;
184				vcc-supply = <&sb_3v3>;
185			};
186		};
187	};
188};
189
190&i2c4 {
191	status = "okay";
192
193	rtc@51 {
194		compatible = "nxp,pcf2129";
195		reg = <0x51>;
196		/* IRQ_RTC_B -> IRQ08, active low */
197		interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>;
198	};
199};
200
201&pcs_mdio3 {
202	status = "okay";
203};
204
205&pcs_mdio4 {
206	status = "okay";
207};
208
209&sata0 {
210	status = "okay";
211};
212
213&sata1 {
214	status = "okay";
215};
216
217&sata2 {
218	status = "okay";
219};
220
221&sata3 {
222	status = "okay";
223};
224
225&uart0 {
226	status = "okay";
227};
228
229&uart1 {
230	status = "okay";
231};
232
233&usb0 {
234	status = "okay";
235};
236
237&usb1 {
238	status = "okay";
239};
240