1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Freescale QorIQ AHCI SATA platform driver
4  *
5  * Copyright 2015 Freescale, Inc.
6  *   Tang Yuantian <Yuantian.Tang@freescale.com>
7  */
8 
9 #include <linux/acpi.h>
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/pm.h>
13 #include <linux/ahci_platform.h>
14 #include <linux/device.h>
15 #include <linux/of_address.h>
16 #include <linux/of.h>
17 #include <linux/of_device.h>
18 #include <linux/platform_device.h>
19 #include <linux/libata.h>
20 #include "ahci.h"
21 
22 #define DRV_NAME "ahci-qoriq"
23 
24 /* port register definition */
25 #define PORT_PHY1	0xA8
26 #define PORT_PHY2	0xAC
27 #define PORT_PHY3	0xB0
28 #define PORT_PHY4	0xB4
29 #define PORT_PHY5	0xB8
30 #define PORT_AXICC	0xBC
31 #define PORT_TRANS	0xC8
32 
33 /* port register default value */
34 #define AHCI_PORT_PHY_1_CFG	0xa003fffe
35 #define AHCI_PORT_PHY2_CFG	0x28184d1f
36 #define AHCI_PORT_PHY3_CFG	0x0e081509
37 #define AHCI_PORT_TRANS_CFG	0x08000029
38 #define AHCI_PORT_AXICC_CFG	0x3fffffff
39 
40 /* for ls1021a */
41 #define LS1021A_PORT_PHY2	0x28183414
42 #define LS1021A_PORT_PHY3	0x0e080e06
43 #define LS1021A_PORT_PHY4	0x064a080b
44 #define LS1021A_PORT_PHY5	0x2aa86470
45 #define LS1021A_AXICC_ADDR	0xC0
46 
47 #define SATA_ECC_DISABLE	0x00020000
48 #define ECC_DIS_ARMV8_CH2	0x80000000
49 #define ECC_DIS_LS1088A		0x40000000
50 
51 enum ahci_qoriq_type {
52 	AHCI_LS1021A,
53 	AHCI_LS1028A,
54 	AHCI_LS1043A,
55 	AHCI_LS2080A,
56 	AHCI_LS1046A,
57 	AHCI_LS1088A,
58 	AHCI_LS2088A,
59 	AHCI_LX2160A,
60 };
61 
62 struct ahci_qoriq_priv {
63 	struct ccsr_ahci *reg_base;
64 	enum ahci_qoriq_type type;
65 	void __iomem *ecc_addr;
66 	bool is_dmacoherent;
67 };
68 
69 static bool ecc_initialized;
70 
71 static const struct of_device_id ahci_qoriq_of_match[] = {
72 	{ .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A},
73 	{ .compatible = "fsl,ls1028a-ahci", .data = (void *)AHCI_LS1028A},
74 	{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
75 	{ .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A},
76 	{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
77 	{ .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A},
78 	{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
79 	{ .compatible = "fsl,lx2160a-ahci", .data = (void *)AHCI_LX2160A},
80 	{},
81 };
82 MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match);
83 
84 static const struct acpi_device_id ahci_qoriq_acpi_match[] = {
85 	{"NXP0004", .driver_data = (kernel_ulong_t)AHCI_LX2160A},
86 	{ }
87 };
88 MODULE_DEVICE_TABLE(acpi, ahci_qoriq_acpi_match);
89 
ahci_qoriq_hardreset(struct ata_link * link,unsigned int * class,unsigned long deadline)90 static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class,
91 			  unsigned long deadline)
92 {
93 	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
94 	void __iomem *port_mmio = ahci_port_base(link->ap);
95 	u32 px_cmd, px_is, px_val;
96 	struct ata_port *ap = link->ap;
97 	struct ahci_port_priv *pp = ap->private_data;
98 	struct ahci_host_priv *hpriv = ap->host->private_data;
99 	struct ahci_qoriq_priv *qoriq_priv = hpriv->plat_data;
100 	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
101 	struct ata_taskfile tf;
102 	bool online;
103 	int rc;
104 	bool ls1021a_workaround = (qoriq_priv->type == AHCI_LS1021A);
105 
106 	DPRINTK("ENTER\n");
107 
108 	hpriv->stop_engine(ap);
109 
110 	/*
111 	 * There is a errata on ls1021a Rev1.0 and Rev2.0 which is:
112 	 * A-009042: The device detection initialization sequence
113 	 * mistakenly resets some registers.
114 	 *
115 	 * Workaround for this is:
116 	 * The software should read and store PxCMD and PxIS values
117 	 * before issuing the device detection initialization sequence.
118 	 * After the sequence is complete, software should restore the
119 	 * PxCMD and PxIS with the stored values.
120 	 */
121 	if (ls1021a_workaround) {
122 		px_cmd = readl(port_mmio + PORT_CMD);
123 		px_is = readl(port_mmio + PORT_IRQ_STAT);
124 	}
125 
126 	/* clear D2H reception area to properly wait for D2H FIS */
127 	ata_tf_init(link->device, &tf);
128 	tf.command = ATA_BUSY;
129 	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
130 
131 	rc = sata_link_hardreset(link, timing, deadline, &online,
132 				 ahci_check_ready);
133 
134 	/* restore the PxCMD and PxIS on ls1021 */
135 	if (ls1021a_workaround) {
136 		px_val = readl(port_mmio + PORT_CMD);
137 		if (px_val != px_cmd)
138 			writel(px_cmd, port_mmio + PORT_CMD);
139 
140 		px_val = readl(port_mmio + PORT_IRQ_STAT);
141 		if (px_val != px_is)
142 			writel(px_is, port_mmio + PORT_IRQ_STAT);
143 	}
144 
145 	hpriv->start_engine(ap);
146 
147 	if (online)
148 		*class = ahci_dev_classify(ap);
149 
150 	DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
151 	return rc;
152 }
153 
154 static struct ata_port_operations ahci_qoriq_ops = {
155 	.inherits	= &ahci_ops,
156 	.hardreset	= ahci_qoriq_hardreset,
157 };
158 
159 static const struct ata_port_info ahci_qoriq_port_info = {
160 	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
161 	.pio_mask	= ATA_PIO4,
162 	.udma_mask	= ATA_UDMA6,
163 	.port_ops	= &ahci_qoriq_ops,
164 };
165 
166 static struct scsi_host_template ahci_qoriq_sht = {
167 	AHCI_SHT(DRV_NAME),
168 };
169 
ahci_qoriq_phy_init(struct ahci_host_priv * hpriv)170 static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
171 {
172 	struct ahci_qoriq_priv *qpriv = hpriv->plat_data;
173 	void __iomem *reg_base = hpriv->mmio;
174 
175 	switch (qpriv->type) {
176 	case AHCI_LS1021A:
177 		if (!(qpriv->ecc_addr || ecc_initialized))
178 			return -EINVAL;
179 		else if (qpriv->ecc_addr && !ecc_initialized)
180 			writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
181 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
182 		writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
183 		writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3);
184 		writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
185 		writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
186 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
187 		if (qpriv->is_dmacoherent)
188 			writel(AHCI_PORT_AXICC_CFG,
189 					reg_base + LS1021A_AXICC_ADDR);
190 		break;
191 
192 	case AHCI_LS1043A:
193 		if (!(qpriv->ecc_addr || ecc_initialized))
194 			return -EINVAL;
195 		else if (qpriv->ecc_addr && !ecc_initialized)
196 			writel(readl(qpriv->ecc_addr) |
197 			       ECC_DIS_ARMV8_CH2,
198 			       qpriv->ecc_addr);
199 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
200 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
201 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
202 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
203 		if (qpriv->is_dmacoherent)
204 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
205 		break;
206 
207 	case AHCI_LS2080A:
208 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
209 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
210 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
211 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
212 		if (qpriv->is_dmacoherent)
213 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
214 		break;
215 
216 	case AHCI_LS1046A:
217 		if (!(qpriv->ecc_addr || ecc_initialized))
218 			return -EINVAL;
219 		else if (qpriv->ecc_addr && !ecc_initialized)
220 			writel(readl(qpriv->ecc_addr) |
221 			       ECC_DIS_ARMV8_CH2,
222 			       qpriv->ecc_addr);
223 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
224 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
225 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
226 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
227 		if (qpriv->is_dmacoherent)
228 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
229 		break;
230 
231 	case AHCI_LS1028A:
232 	case AHCI_LS1088A:
233 	case AHCI_LX2160A:
234 		if (!(qpriv->ecc_addr || ecc_initialized))
235 			return -EINVAL;
236 		else if (qpriv->ecc_addr && !ecc_initialized)
237 			writel(readl(qpriv->ecc_addr) |
238 			       ECC_DIS_LS1088A,
239 			       qpriv->ecc_addr);
240 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
241 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
242 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
243 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
244 		if (qpriv->is_dmacoherent)
245 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
246 		break;
247 
248 	case AHCI_LS2088A:
249 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
250 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
251 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
252 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
253 		if (qpriv->is_dmacoherent)
254 			writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
255 		break;
256 	}
257 
258 	ecc_initialized = true;
259 	return 0;
260 }
261 
ahci_qoriq_probe(struct platform_device * pdev)262 static int ahci_qoriq_probe(struct platform_device *pdev)
263 {
264 	struct device_node *np = pdev->dev.of_node;
265 	const struct acpi_device_id *acpi_id;
266 	struct device *dev = &pdev->dev;
267 	struct ahci_host_priv *hpriv;
268 	struct ahci_qoriq_priv *qoriq_priv;
269 	const struct of_device_id *of_id;
270 	struct resource *res;
271 	int rc;
272 
273 	hpriv = ahci_platform_get_resources(pdev, 0);
274 	if (IS_ERR(hpriv))
275 		return PTR_ERR(hpriv);
276 
277 	of_id = of_match_node(ahci_qoriq_of_match, np);
278 	acpi_id = acpi_match_device(ahci_qoriq_acpi_match, &pdev->dev);
279 	if (!(of_id || acpi_id))
280 		return -ENODEV;
281 
282 	qoriq_priv = devm_kzalloc(dev, sizeof(*qoriq_priv), GFP_KERNEL);
283 	if (!qoriq_priv)
284 		return -ENOMEM;
285 
286 	if (of_id)
287 		qoriq_priv->type = (enum ahci_qoriq_type)of_id->data;
288 	else
289 		qoriq_priv->type = (enum ahci_qoriq_type)acpi_id->driver_data;
290 
291 	if (unlikely(!ecc_initialized)) {
292 		res = platform_get_resource_byname(pdev,
293 						   IORESOURCE_MEM,
294 						   "sata-ecc");
295 		if (res) {
296 			qoriq_priv->ecc_addr =
297 				devm_ioremap_resource(dev, res);
298 			if (IS_ERR(qoriq_priv->ecc_addr))
299 				return PTR_ERR(qoriq_priv->ecc_addr);
300 		}
301 	}
302 
303 	if (device_get_dma_attr(&pdev->dev) == DEV_DMA_COHERENT)
304 		qoriq_priv->is_dmacoherent = true;
305 
306 	rc = ahci_platform_enable_resources(hpriv);
307 	if (rc)
308 		return rc;
309 
310 	hpriv->plat_data = qoriq_priv;
311 	rc = ahci_qoriq_phy_init(hpriv);
312 	if (rc)
313 		goto disable_resources;
314 
315 	rc = ahci_platform_init_host(pdev, hpriv, &ahci_qoriq_port_info,
316 				     &ahci_qoriq_sht);
317 	if (rc)
318 		goto disable_resources;
319 
320 	return 0;
321 
322 disable_resources:
323 	ahci_platform_disable_resources(hpriv);
324 
325 	return rc;
326 }
327 
328 #ifdef CONFIG_PM_SLEEP
ahci_qoriq_resume(struct device * dev)329 static int ahci_qoriq_resume(struct device *dev)
330 {
331 	struct ata_host *host = dev_get_drvdata(dev);
332 	struct ahci_host_priv *hpriv = host->private_data;
333 	int rc;
334 
335 	rc = ahci_platform_enable_resources(hpriv);
336 	if (rc)
337 		return rc;
338 
339 	rc = ahci_qoriq_phy_init(hpriv);
340 	if (rc)
341 		goto disable_resources;
342 
343 	rc = ahci_platform_resume_host(dev);
344 	if (rc)
345 		goto disable_resources;
346 
347 	/* We resumed so update PM runtime state */
348 	pm_runtime_disable(dev);
349 	pm_runtime_set_active(dev);
350 	pm_runtime_enable(dev);
351 
352 	return 0;
353 
354 disable_resources:
355 	ahci_platform_disable_resources(hpriv);
356 
357 	return rc;
358 }
359 #endif
360 
361 static SIMPLE_DEV_PM_OPS(ahci_qoriq_pm_ops, ahci_platform_suspend,
362 			 ahci_qoriq_resume);
363 
364 static struct platform_driver ahci_qoriq_driver = {
365 	.probe = ahci_qoriq_probe,
366 	.remove = ata_platform_remove_one,
367 	.driver = {
368 		.name = DRV_NAME,
369 		.of_match_table = ahci_qoriq_of_match,
370 		.acpi_match_table = ahci_qoriq_acpi_match,
371 		.pm = &ahci_qoriq_pm_ops,
372 	},
373 };
374 module_platform_driver(ahci_qoriq_driver);
375 
376 MODULE_DESCRIPTION("Freescale QorIQ AHCI SATA platform driver");
377 MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>");
378 MODULE_LICENSE("GPL");
379