1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Xilinx Zynq Ultrascale+ MPSoC Real Time Clock Driver
4 *
5 * Copyright (C) 2015 Xilinx, Inc.
6 *
7 */
8
9 #include <linux/delay.h>
10 #include <linux/init.h>
11 #include <linux/io.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/platform_device.h>
15 #include <linux/rtc.h>
16
17 /* RTC Registers */
18 #define RTC_SET_TM_WR 0x00
19 #define RTC_SET_TM_RD 0x04
20 #define RTC_CALIB_WR 0x08
21 #define RTC_CALIB_RD 0x0C
22 #define RTC_CUR_TM 0x10
23 #define RTC_CUR_TICK 0x14
24 #define RTC_ALRM 0x18
25 #define RTC_INT_STS 0x20
26 #define RTC_INT_MASK 0x24
27 #define RTC_INT_EN 0x28
28 #define RTC_INT_DIS 0x2C
29 #define RTC_CTRL 0x40
30
31 #define RTC_FR_EN BIT(20)
32 #define RTC_FR_DATSHIFT 16
33 #define RTC_TICK_MASK 0xFFFF
34 #define RTC_INT_SEC BIT(0)
35 #define RTC_INT_ALRM BIT(1)
36 #define RTC_OSC_EN BIT(24)
37 #define RTC_BATT_EN BIT(31)
38
39 #define RTC_CALIB_DEF 0x198233
40 #define RTC_CALIB_MASK 0x1FFFFF
41 #define RTC_ALRM_MASK BIT(1)
42 #define RTC_MSEC 1000
43
44 struct xlnx_rtc_dev {
45 struct rtc_device *rtc;
46 void __iomem *reg_base;
47 int alarm_irq;
48 int sec_irq;
49 unsigned int calibval;
50 };
51
xlnx_rtc_set_time(struct device * dev,struct rtc_time * tm)52 static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
53 {
54 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
55 unsigned long new_time;
56
57 /*
58 * The value written will be updated after 1 sec into the
59 * seconds read register, so we need to program time +1 sec
60 * to get the correct time on read.
61 */
62 new_time = rtc_tm_to_time64(tm) + 1;
63
64 /*
65 * Writing into calibration register will clear the Tick Counter and
66 * force the next second to be signaled exactly in 1 second period
67 */
68 xrtcdev->calibval &= RTC_CALIB_MASK;
69 writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
70
71 writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);
72
73 /*
74 * Clear the rtc interrupt status register after setting the
75 * time. During a read_time function, the code should read the
76 * RTC_INT_STATUS register and if bit 0 is still 0, it means
77 * that one second has not elapsed yet since RTC was set and
78 * the current time should be read from SET_TIME_READ register;
79 * otherwise, CURRENT_TIME register is read to report the time
80 */
81 writel(RTC_INT_SEC, xrtcdev->reg_base + RTC_INT_STS);
82
83 return 0;
84 }
85
xlnx_rtc_read_time(struct device * dev,struct rtc_time * tm)86 static int xlnx_rtc_read_time(struct device *dev, struct rtc_time *tm)
87 {
88 u32 status;
89 unsigned long read_time;
90 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
91
92 status = readl(xrtcdev->reg_base + RTC_INT_STS);
93
94 if (status & RTC_INT_SEC) {
95 /*
96 * RTC has updated the CURRENT_TIME with the time written into
97 * SET_TIME_WRITE register.
98 */
99 read_time = readl(xrtcdev->reg_base + RTC_CUR_TM);
100 } else {
101 /*
102 * Time written in SET_TIME_WRITE has not yet updated into
103 * the seconds read register, so read the time from the
104 * SET_TIME_WRITE instead of CURRENT_TIME register.
105 * Since we add +1 sec while writing, we need to -1 sec while
106 * reading.
107 */
108 read_time = readl(xrtcdev->reg_base + RTC_SET_TM_RD) - 1;
109 }
110 rtc_time64_to_tm(read_time, tm);
111
112 return 0;
113 }
114
xlnx_rtc_read_alarm(struct device * dev,struct rtc_wkalrm * alrm)115 static int xlnx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
116 {
117 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
118
119 rtc_time64_to_tm(readl(xrtcdev->reg_base + RTC_ALRM), &alrm->time);
120 alrm->enabled = readl(xrtcdev->reg_base + RTC_INT_MASK) & RTC_INT_ALRM;
121
122 return 0;
123 }
124
xlnx_rtc_alarm_irq_enable(struct device * dev,u32 enabled)125 static int xlnx_rtc_alarm_irq_enable(struct device *dev, u32 enabled)
126 {
127 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
128 unsigned int status;
129 ulong timeout;
130
131 timeout = jiffies + msecs_to_jiffies(RTC_MSEC);
132
133 if (enabled) {
134 while (1) {
135 status = readl(xrtcdev->reg_base + RTC_INT_STS);
136 if (!((status & RTC_ALRM_MASK) == RTC_ALRM_MASK))
137 break;
138
139 if (time_after_eq(jiffies, timeout)) {
140 dev_err(dev, "Time out occur, while clearing alarm status bit\n");
141 return -ETIMEDOUT;
142 }
143 writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_STS);
144 }
145
146 writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_EN);
147 } else {
148 writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
149 }
150
151 return 0;
152 }
153
xlnx_rtc_set_alarm(struct device * dev,struct rtc_wkalrm * alrm)154 static int xlnx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
155 {
156 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
157 unsigned long alarm_time;
158
159 alarm_time = rtc_tm_to_time64(&alrm->time);
160
161 writel((u32)alarm_time, (xrtcdev->reg_base + RTC_ALRM));
162
163 xlnx_rtc_alarm_irq_enable(dev, alrm->enabled);
164
165 return 0;
166 }
167
xlnx_init_rtc(struct xlnx_rtc_dev * xrtcdev)168 static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
169 {
170 u32 rtc_ctrl;
171
172 /* Enable RTC switch to battery when VCC_PSAUX is not available */
173 rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
174 rtc_ctrl |= RTC_BATT_EN;
175 writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);
176
177 /*
178 * Based on crystal freq of 33.330 KHz
179 * set the seconds counter and enable, set fractions counter
180 * to default value suggested as per design spec
181 * to correct RTC delay in frequency over period of time.
182 */
183 xrtcdev->calibval &= RTC_CALIB_MASK;
184 writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
185 }
186
187 static const struct rtc_class_ops xlnx_rtc_ops = {
188 .set_time = xlnx_rtc_set_time,
189 .read_time = xlnx_rtc_read_time,
190 .read_alarm = xlnx_rtc_read_alarm,
191 .set_alarm = xlnx_rtc_set_alarm,
192 .alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
193 };
194
xlnx_rtc_interrupt(int irq,void * id)195 static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
196 {
197 struct xlnx_rtc_dev *xrtcdev = (struct xlnx_rtc_dev *)id;
198 unsigned int status;
199
200 status = readl(xrtcdev->reg_base + RTC_INT_STS);
201 /* Check if interrupt asserted */
202 if (!(status & (RTC_INT_SEC | RTC_INT_ALRM)))
203 return IRQ_NONE;
204
205 /* Disable RTC_INT_ALRM interrupt only */
206 writel(RTC_INT_ALRM, xrtcdev->reg_base + RTC_INT_DIS);
207
208 if (status & RTC_INT_ALRM)
209 rtc_update_irq(xrtcdev->rtc, 1, RTC_IRQF | RTC_AF);
210
211 return IRQ_HANDLED;
212 }
213
xlnx_rtc_probe(struct platform_device * pdev)214 static int xlnx_rtc_probe(struct platform_device *pdev)
215 {
216 struct xlnx_rtc_dev *xrtcdev;
217 int ret;
218
219 xrtcdev = devm_kzalloc(&pdev->dev, sizeof(*xrtcdev), GFP_KERNEL);
220 if (!xrtcdev)
221 return -ENOMEM;
222
223 platform_set_drvdata(pdev, xrtcdev);
224
225 xrtcdev->rtc = devm_rtc_allocate_device(&pdev->dev);
226 if (IS_ERR(xrtcdev->rtc))
227 return PTR_ERR(xrtcdev->rtc);
228
229 xrtcdev->rtc->ops = &xlnx_rtc_ops;
230 xrtcdev->rtc->range_max = U32_MAX;
231
232 xrtcdev->reg_base = devm_platform_ioremap_resource(pdev, 0);
233 if (IS_ERR(xrtcdev->reg_base))
234 return PTR_ERR(xrtcdev->reg_base);
235
236 xrtcdev->alarm_irq = platform_get_irq_byname(pdev, "alarm");
237 if (xrtcdev->alarm_irq < 0)
238 return xrtcdev->alarm_irq;
239 ret = devm_request_irq(&pdev->dev, xrtcdev->alarm_irq,
240 xlnx_rtc_interrupt, 0,
241 dev_name(&pdev->dev), xrtcdev);
242 if (ret) {
243 dev_err(&pdev->dev, "request irq failed\n");
244 return ret;
245 }
246
247 xrtcdev->sec_irq = platform_get_irq_byname(pdev, "sec");
248 if (xrtcdev->sec_irq < 0)
249 return xrtcdev->sec_irq;
250 ret = devm_request_irq(&pdev->dev, xrtcdev->sec_irq,
251 xlnx_rtc_interrupt, 0,
252 dev_name(&pdev->dev), xrtcdev);
253 if (ret) {
254 dev_err(&pdev->dev, "request irq failed\n");
255 return ret;
256 }
257
258 ret = of_property_read_u32(pdev->dev.of_node, "calibration",
259 &xrtcdev->calibval);
260 if (ret)
261 xrtcdev->calibval = RTC_CALIB_DEF;
262
263 xlnx_init_rtc(xrtcdev);
264
265 device_init_wakeup(&pdev->dev, 1);
266
267 return devm_rtc_register_device(xrtcdev->rtc);
268 }
269
xlnx_rtc_remove(struct platform_device * pdev)270 static int xlnx_rtc_remove(struct platform_device *pdev)
271 {
272 xlnx_rtc_alarm_irq_enable(&pdev->dev, 0);
273 device_init_wakeup(&pdev->dev, 0);
274
275 return 0;
276 }
277
xlnx_rtc_suspend(struct device * dev)278 static int __maybe_unused xlnx_rtc_suspend(struct device *dev)
279 {
280 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
281
282 if (device_may_wakeup(dev))
283 enable_irq_wake(xrtcdev->alarm_irq);
284 else
285 xlnx_rtc_alarm_irq_enable(dev, 0);
286
287 return 0;
288 }
289
xlnx_rtc_resume(struct device * dev)290 static int __maybe_unused xlnx_rtc_resume(struct device *dev)
291 {
292 struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
293
294 if (device_may_wakeup(dev))
295 disable_irq_wake(xrtcdev->alarm_irq);
296 else
297 xlnx_rtc_alarm_irq_enable(dev, 1);
298
299 return 0;
300 }
301
302 static SIMPLE_DEV_PM_OPS(xlnx_rtc_pm_ops, xlnx_rtc_suspend, xlnx_rtc_resume);
303
304 static const struct of_device_id xlnx_rtc_of_match[] = {
305 {.compatible = "xlnx,zynqmp-rtc" },
306 { }
307 };
308 MODULE_DEVICE_TABLE(of, xlnx_rtc_of_match);
309
310 static struct platform_driver xlnx_rtc_driver = {
311 .probe = xlnx_rtc_probe,
312 .remove = xlnx_rtc_remove,
313 .driver = {
314 .name = KBUILD_MODNAME,
315 .pm = &xlnx_rtc_pm_ops,
316 .of_match_table = xlnx_rtc_of_match,
317 },
318 };
319
320 module_platform_driver(xlnx_rtc_driver);
321
322 MODULE_DESCRIPTION("Xilinx Zynq MPSoC RTC driver");
323 MODULE_AUTHOR("Xilinx Inc.");
324 MODULE_LICENSE("GPL v2");
325