1.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
2
3.. c:type:: dvb_frontend_parameters
4
5*******************
6frontend parameters
7*******************
8
9The kind of parameters passed to the frontend device for tuning depend
10on the kind of hardware you are using.
11
12The struct ``dvb_frontend_parameters`` uses a union with specific
13per-system parameters. However, as newer delivery systems required more
14data, the structure size weren't enough to fit, and just extending its
15size would break the existing applications. So, those parameters were
16replaced by the usage of
17:ref:`FE_GET_PROPERTY/FE_SET_PROPERTY <FE_GET_PROPERTY>`
18ioctl's. The new API is flexible enough to add new parameters to
19existing delivery systems, and to add newer delivery systems.
20
21So, newer applications should use
22:ref:`FE_GET_PROPERTY/FE_SET_PROPERTY <FE_GET_PROPERTY>`
23instead, in order to be able to support the newer System Delivery like
24DVB-S2, DVB-T2, DVB-C2, ISDB, etc.
25
26All kinds of parameters are combined as a union in the
27``dvb_frontend_parameters`` structure:
28
29
30.. code-block:: c
31
32    struct dvb_frontend_parameters {
33	uint32_t frequency;     /* (absolute) frequency in Hz for QAM/OFDM */
34		    /* intermediate frequency in kHz for QPSK */
35	fe_spectral_inversion_t inversion;
36	union {
37	    struct dvb_qpsk_parameters qpsk;
38	    struct dvb_qam_parameters  qam;
39	    struct dvb_ofdm_parameters ofdm;
40	    struct dvb_vsb_parameters  vsb;
41	} u;
42    };
43
44In the case of QPSK frontends the ``frequency`` field specifies the
45intermediate frequency, i.e. the offset which is effectively added to
46the local oscillator frequency (LOF) of the LNB. The intermediate
47frequency has to be specified in units of kHz. For QAM and OFDM
48frontends the ``frequency`` specifies the absolute frequency and is
49given in Hz.
50
51
52.. c:type:: dvb_qpsk_parameters
53
54QPSK parameters
55===============
56
57For satellite QPSK frontends you have to use the ``dvb_qpsk_parameters``
58structure:
59
60
61.. code-block:: c
62
63     struct dvb_qpsk_parameters {
64	 uint32_t        symbol_rate;  /* symbol rate in Symbols per second */
65	 fe_code_rate_t  fec_inner;    /* forward error correction (see above) */
66     };
67
68
69.. c:type:: dvb_qam_parameters
70
71QAM parameters
72==============
73
74for cable QAM frontend you use the ``dvb_qam_parameters`` structure:
75
76
77.. code-block:: c
78
79     struct dvb_qam_parameters {
80	 uint32_t         symbol_rate; /* symbol rate in Symbols per second */
81	 fe_code_rate_t   fec_inner;   /* forward error correction (see above) */
82	 fe_modulation_t  modulation;  /* modulation type (see above) */
83     };
84
85
86.. c:type:: dvb_vsb_parameters
87
88VSB parameters
89==============
90
91ATSC frontends are supported by the ``dvb_vsb_parameters`` structure:
92
93
94.. code-block:: c
95
96    struct dvb_vsb_parameters {
97	fe_modulation_t modulation; /* modulation type (see above) */
98    };
99
100
101.. c:type:: dvb_ofdm_parameters
102
103OFDM parameters
104===============
105
106DVB-T frontends are supported by the ``dvb_ofdm_parameters`` structure:
107
108
109.. code-block:: c
110
111     struct dvb_ofdm_parameters {
112	 fe_bandwidth_t      bandwidth;
113	 fe_code_rate_t      code_rate_HP;  /* high priority stream code rate */
114	 fe_code_rate_t      code_rate_LP;  /* low priority stream code rate */
115	 fe_modulation_t     constellation; /* modulation type (see above) */
116	 fe_transmit_mode_t  transmission_mode;
117	 fe_guard_interval_t guard_interval;
118	 fe_hierarchy_t      hierarchy_information;
119     };
120