1# SPDX-License-Identifier: GPL-2.0
2config EMBEDDED6xx
3	bool "Embedded 6xx/7xx/7xxx-based boards"
4	depends on PPC_BOOK3S_32 && BROKEN_ON_SMP
5
6config LINKSTATION
7	bool "Linkstation / Kurobox(HG) from Buffalo"
8	depends on EMBEDDED6xx
9	select MPIC
10	select FSL_SOC
11	select PPC_UDBG_16550 if SERIAL_8250
12	select DEFAULT_UIMAGE
13	select MPC10X_BRIDGE
14	help
15	  Select LINKSTATION if configuring for one of PPC- (MPC8241)
16	  based NAS systems from Buffalo Technology. So far only
17	  KuroboxHG has been tested. In the future classical Kurobox,
18	  Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
19	  Terastation systems should be supported too.
20
21config STORCENTER
22	bool "IOMEGA StorCenter"
23	depends on EMBEDDED6xx
24	select MPIC
25	select FSL_SOC
26	select PPC_UDBG_16550 if SERIAL_8250
27	select MPC10X_BRIDGE
28	help
29	  Select STORCENTER if configuring for the iomega StorCenter
30	  with an 8241 CPU in it.
31
32config MPC7448HPC2
33	bool "Freescale MPC7448HPC2(Taiga)"
34	depends on EMBEDDED6xx
35	select TSI108_BRIDGE
36	select DEFAULT_UIMAGE
37	select PPC_UDBG_16550
38	help
39	  Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
40	  platform
41
42config PPC_HOLLY
43	bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)"
44	depends on EMBEDDED6xx
45	select TSI108_BRIDGE
46	select PPC_UDBG_16550
47	help
48	  Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
49	  Board with TSI108/9 bridge (Hickory/Holly)
50
51config MVME5100
52	bool "Motorola/Emerson MVME5100"
53	depends on EMBEDDED6xx
54	select MPIC
55	select FORCE_PCI
56	select PPC_INDIRECT_PCI
57	select PPC_I8259
58	select PPC_NATIVE
59	select PPC_UDBG_16550
60	help
61	  This option enables support for the Motorola (now Emerson) MVME5100
62	  board.
63
64config TSI108_BRIDGE
65	bool
66	select FORCE_PCI
67	select MPIC
68	select MPIC_WEIRD
69
70config MPC10X_BRIDGE
71	bool
72	select PPC_INDIRECT_PCI
73
74config GAMECUBE_COMMON
75	bool
76
77config USBGECKO_UDBG
78	bool "USB Gecko udbg console for the Nintendo GameCube/Wii"
79	depends on GAMECUBE_COMMON
80	help
81	  If you say yes to this option, support will be included for the
82	  USB Gecko adapter as an udbg console.
83	  The USB Gecko is a EXI to USB Serial converter that can be plugged
84	  into a memcard slot in the Nintendo GameCube/Wii.
85
86	  This driver bypasses the EXI layer completely.
87
88	  If in doubt, say N here.
89
90config GAMECUBE
91	bool "Nintendo-GameCube"
92	depends on EMBEDDED6xx
93	select GAMECUBE_COMMON
94	help
95	  Select GAMECUBE if configuring for the Nintendo GameCube.
96	  More information at: <http://gc-linux.sourceforge.net/>
97
98config WII
99	bool "Nintendo-Wii"
100	depends on EMBEDDED6xx
101	select GAMECUBE_COMMON
102	help
103	  Select WII if configuring for the Nintendo Wii.
104	  More information at: <http://gc-linux.sourceforge.net/>
105