1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * nosy - Snoop mode driver for TI PCILynx 1394 controllers
4 * Copyright (C) 2002-2007 Kristian Høgsberg
5 */
6
7 #include <linux/device.h>
8 #include <linux/errno.h>
9 #include <linux/fs.h>
10 #include <linux/init.h>
11 #include <linux/interrupt.h>
12 #include <linux/io.h>
13 #include <linux/kernel.h>
14 #include <linux/kref.h>
15 #include <linux/miscdevice.h>
16 #include <linux/module.h>
17 #include <linux/mutex.h>
18 #include <linux/pci.h>
19 #include <linux/poll.h>
20 #include <linux/sched.h> /* required for linux/wait.h */
21 #include <linux/slab.h>
22 #include <linux/spinlock.h>
23 #include <linux/time64.h>
24 #include <linux/timex.h>
25 #include <linux/uaccess.h>
26 #include <linux/wait.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/atomic.h>
29 #include <asm/byteorder.h>
30
31 #include "nosy.h"
32 #include "nosy-user.h"
33
34 #define TCODE_PHY_PACKET 0x10
35 #define PCI_DEVICE_ID_TI_PCILYNX 0x8000
36
37 static char driver_name[] = KBUILD_MODNAME;
38
39 /* this is the physical layout of a PCL, its size is 128 bytes */
40 struct pcl {
41 __le32 next;
42 __le32 async_error_next;
43 u32 user_data;
44 __le32 pcl_status;
45 __le32 remaining_transfer_count;
46 __le32 next_data_buffer;
47 struct {
48 __le32 control;
49 __le32 pointer;
50 } buffer[13];
51 };
52
53 struct packet {
54 unsigned int length;
55 char data[];
56 };
57
58 struct packet_buffer {
59 char *data;
60 size_t capacity;
61 long total_packet_count, lost_packet_count;
62 atomic_t size;
63 struct packet *head, *tail;
64 wait_queue_head_t wait;
65 };
66
67 struct pcilynx {
68 struct pci_dev *pci_device;
69 __iomem char *registers;
70
71 struct pcl *rcv_start_pcl, *rcv_pcl;
72 __le32 *rcv_buffer;
73
74 dma_addr_t rcv_start_pcl_bus, rcv_pcl_bus, rcv_buffer_bus;
75
76 spinlock_t client_list_lock;
77 struct list_head client_list;
78
79 struct miscdevice misc;
80 struct list_head link;
81 struct kref kref;
82 };
83
84 static inline struct pcilynx *
lynx_get(struct pcilynx * lynx)85 lynx_get(struct pcilynx *lynx)
86 {
87 kref_get(&lynx->kref);
88
89 return lynx;
90 }
91
92 static void
lynx_release(struct kref * kref)93 lynx_release(struct kref *kref)
94 {
95 kfree(container_of(kref, struct pcilynx, kref));
96 }
97
98 static inline void
lynx_put(struct pcilynx * lynx)99 lynx_put(struct pcilynx *lynx)
100 {
101 kref_put(&lynx->kref, lynx_release);
102 }
103
104 struct client {
105 struct pcilynx *lynx;
106 u32 tcode_mask;
107 struct packet_buffer buffer;
108 struct list_head link;
109 };
110
111 static DEFINE_MUTEX(card_mutex);
112 static LIST_HEAD(card_list);
113
114 static int
packet_buffer_init(struct packet_buffer * buffer,size_t capacity)115 packet_buffer_init(struct packet_buffer *buffer, size_t capacity)
116 {
117 buffer->data = kmalloc(capacity, GFP_KERNEL);
118 if (buffer->data == NULL)
119 return -ENOMEM;
120 buffer->head = (struct packet *) buffer->data;
121 buffer->tail = (struct packet *) buffer->data;
122 buffer->capacity = capacity;
123 buffer->lost_packet_count = 0;
124 atomic_set(&buffer->size, 0);
125 init_waitqueue_head(&buffer->wait);
126
127 return 0;
128 }
129
130 static void
packet_buffer_destroy(struct packet_buffer * buffer)131 packet_buffer_destroy(struct packet_buffer *buffer)
132 {
133 kfree(buffer->data);
134 }
135
136 static int
packet_buffer_get(struct client * client,char __user * data,size_t user_length)137 packet_buffer_get(struct client *client, char __user *data, size_t user_length)
138 {
139 struct packet_buffer *buffer = &client->buffer;
140 size_t length;
141 char *end;
142
143 if (wait_event_interruptible(buffer->wait,
144 atomic_read(&buffer->size) > 0) ||
145 list_empty(&client->lynx->link))
146 return -ERESTARTSYS;
147
148 if (atomic_read(&buffer->size) == 0)
149 return -ENODEV;
150
151 /* FIXME: Check length <= user_length. */
152
153 end = buffer->data + buffer->capacity;
154 length = buffer->head->length;
155
156 if (&buffer->head->data[length] < end) {
157 if (copy_to_user(data, buffer->head->data, length))
158 return -EFAULT;
159 buffer->head = (struct packet *) &buffer->head->data[length];
160 } else {
161 size_t split = end - buffer->head->data;
162
163 if (copy_to_user(data, buffer->head->data, split))
164 return -EFAULT;
165 if (copy_to_user(data + split, buffer->data, length - split))
166 return -EFAULT;
167 buffer->head = (struct packet *) &buffer->data[length - split];
168 }
169
170 /*
171 * Decrease buffer->size as the last thing, since this is what
172 * keeps the interrupt from overwriting the packet we are
173 * retrieving from the buffer.
174 */
175 atomic_sub(sizeof(struct packet) + length, &buffer->size);
176
177 return length;
178 }
179
180 static void
packet_buffer_put(struct packet_buffer * buffer,void * data,size_t length)181 packet_buffer_put(struct packet_buffer *buffer, void *data, size_t length)
182 {
183 char *end;
184
185 buffer->total_packet_count++;
186
187 if (buffer->capacity <
188 atomic_read(&buffer->size) + sizeof(struct packet) + length) {
189 buffer->lost_packet_count++;
190 return;
191 }
192
193 end = buffer->data + buffer->capacity;
194 buffer->tail->length = length;
195
196 if (&buffer->tail->data[length] < end) {
197 memcpy(buffer->tail->data, data, length);
198 buffer->tail = (struct packet *) &buffer->tail->data[length];
199 } else {
200 size_t split = end - buffer->tail->data;
201
202 memcpy(buffer->tail->data, data, split);
203 memcpy(buffer->data, data + split, length - split);
204 buffer->tail = (struct packet *) &buffer->data[length - split];
205 }
206
207 /* Finally, adjust buffer size and wake up userspace reader. */
208
209 atomic_add(sizeof(struct packet) + length, &buffer->size);
210 wake_up_interruptible(&buffer->wait);
211 }
212
213 static inline void
reg_write(struct pcilynx * lynx,int offset,u32 data)214 reg_write(struct pcilynx *lynx, int offset, u32 data)
215 {
216 writel(data, lynx->registers + offset);
217 }
218
219 static inline u32
reg_read(struct pcilynx * lynx,int offset)220 reg_read(struct pcilynx *lynx, int offset)
221 {
222 return readl(lynx->registers + offset);
223 }
224
225 static inline void
reg_set_bits(struct pcilynx * lynx,int offset,u32 mask)226 reg_set_bits(struct pcilynx *lynx, int offset, u32 mask)
227 {
228 reg_write(lynx, offset, (reg_read(lynx, offset) | mask));
229 }
230
231 /*
232 * Maybe the pcl programs could be set up to just append data instead
233 * of using a whole packet.
234 */
235 static inline void
run_pcl(struct pcilynx * lynx,dma_addr_t pcl_bus,int dmachan)236 run_pcl(struct pcilynx *lynx, dma_addr_t pcl_bus,
237 int dmachan)
238 {
239 reg_write(lynx, DMA0_CURRENT_PCL + dmachan * 0x20, pcl_bus);
240 reg_write(lynx, DMA0_CHAN_CTRL + dmachan * 0x20,
241 DMA_CHAN_CTRL_ENABLE | DMA_CHAN_CTRL_LINK);
242 }
243
244 static int
set_phy_reg(struct pcilynx * lynx,int addr,int val)245 set_phy_reg(struct pcilynx *lynx, int addr, int val)
246 {
247 if (addr > 15) {
248 dev_err(&lynx->pci_device->dev,
249 "PHY register address %d out of range\n", addr);
250 return -1;
251 }
252 if (val > 0xff) {
253 dev_err(&lynx->pci_device->dev,
254 "PHY register value %d out of range\n", val);
255 return -1;
256 }
257 reg_write(lynx, LINK_PHY, LINK_PHY_WRITE |
258 LINK_PHY_ADDR(addr) | LINK_PHY_WDATA(val));
259
260 return 0;
261 }
262
263 static int
nosy_open(struct inode * inode,struct file * file)264 nosy_open(struct inode *inode, struct file *file)
265 {
266 int minor = iminor(inode);
267 struct client *client;
268 struct pcilynx *tmp, *lynx = NULL;
269
270 mutex_lock(&card_mutex);
271 list_for_each_entry(tmp, &card_list, link)
272 if (tmp->misc.minor == minor) {
273 lynx = lynx_get(tmp);
274 break;
275 }
276 mutex_unlock(&card_mutex);
277 if (lynx == NULL)
278 return -ENODEV;
279
280 client = kmalloc(sizeof *client, GFP_KERNEL);
281 if (client == NULL)
282 goto fail;
283
284 client->tcode_mask = ~0;
285 client->lynx = lynx;
286 INIT_LIST_HEAD(&client->link);
287
288 if (packet_buffer_init(&client->buffer, 128 * 1024) < 0)
289 goto fail;
290
291 file->private_data = client;
292
293 return stream_open(inode, file);
294 fail:
295 kfree(client);
296 lynx_put(lynx);
297
298 return -ENOMEM;
299 }
300
301 static int
nosy_release(struct inode * inode,struct file * file)302 nosy_release(struct inode *inode, struct file *file)
303 {
304 struct client *client = file->private_data;
305 struct pcilynx *lynx = client->lynx;
306
307 spin_lock_irq(&lynx->client_list_lock);
308 list_del_init(&client->link);
309 spin_unlock_irq(&lynx->client_list_lock);
310
311 packet_buffer_destroy(&client->buffer);
312 kfree(client);
313 lynx_put(lynx);
314
315 return 0;
316 }
317
318 static __poll_t
nosy_poll(struct file * file,poll_table * pt)319 nosy_poll(struct file *file, poll_table *pt)
320 {
321 struct client *client = file->private_data;
322 __poll_t ret = 0;
323
324 poll_wait(file, &client->buffer.wait, pt);
325
326 if (atomic_read(&client->buffer.size) > 0)
327 ret = EPOLLIN | EPOLLRDNORM;
328
329 if (list_empty(&client->lynx->link))
330 ret |= EPOLLHUP;
331
332 return ret;
333 }
334
335 static ssize_t
nosy_read(struct file * file,char __user * buffer,size_t count,loff_t * offset)336 nosy_read(struct file *file, char __user *buffer, size_t count, loff_t *offset)
337 {
338 struct client *client = file->private_data;
339
340 return packet_buffer_get(client, buffer, count);
341 }
342
343 static long
nosy_ioctl(struct file * file,unsigned int cmd,unsigned long arg)344 nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
345 {
346 struct client *client = file->private_data;
347 spinlock_t *client_list_lock = &client->lynx->client_list_lock;
348 struct nosy_stats stats;
349 int ret;
350
351 switch (cmd) {
352 case NOSY_IOC_GET_STATS:
353 spin_lock_irq(client_list_lock);
354 stats.total_packet_count = client->buffer.total_packet_count;
355 stats.lost_packet_count = client->buffer.lost_packet_count;
356 spin_unlock_irq(client_list_lock);
357
358 if (copy_to_user((void __user *) arg, &stats, sizeof stats))
359 return -EFAULT;
360 else
361 return 0;
362
363 case NOSY_IOC_START:
364 ret = -EBUSY;
365 spin_lock_irq(client_list_lock);
366 if (list_empty(&client->link)) {
367 list_add_tail(&client->link, &client->lynx->client_list);
368 ret = 0;
369 }
370 spin_unlock_irq(client_list_lock);
371
372 return ret;
373
374 case NOSY_IOC_STOP:
375 spin_lock_irq(client_list_lock);
376 list_del_init(&client->link);
377 spin_unlock_irq(client_list_lock);
378
379 return 0;
380
381 case NOSY_IOC_FILTER:
382 spin_lock_irq(client_list_lock);
383 client->tcode_mask = arg;
384 spin_unlock_irq(client_list_lock);
385
386 return 0;
387
388 default:
389 return -EINVAL;
390 /* Flush buffer, configure filter. */
391 }
392 }
393
394 static const struct file_operations nosy_ops = {
395 .owner = THIS_MODULE,
396 .read = nosy_read,
397 .unlocked_ioctl = nosy_ioctl,
398 .poll = nosy_poll,
399 .open = nosy_open,
400 .release = nosy_release,
401 };
402
403 #define PHY_PACKET_SIZE 12 /* 1 payload, 1 inverse, 1 ack = 3 quadlets */
404
405 static void
packet_irq_handler(struct pcilynx * lynx)406 packet_irq_handler(struct pcilynx *lynx)
407 {
408 struct client *client;
409 u32 tcode_mask, tcode, timestamp;
410 size_t length;
411 struct timespec64 ts64;
412
413 /* FIXME: Also report rcv_speed. */
414
415 length = __le32_to_cpu(lynx->rcv_pcl->pcl_status) & 0x00001fff;
416 tcode = __le32_to_cpu(lynx->rcv_buffer[1]) >> 4 & 0xf;
417
418 ktime_get_real_ts64(&ts64);
419 timestamp = ts64.tv_nsec / NSEC_PER_USEC;
420 lynx->rcv_buffer[0] = (__force __le32)timestamp;
421
422 if (length == PHY_PACKET_SIZE)
423 tcode_mask = 1 << TCODE_PHY_PACKET;
424 else
425 tcode_mask = 1 << tcode;
426
427 spin_lock(&lynx->client_list_lock);
428
429 list_for_each_entry(client, &lynx->client_list, link)
430 if (client->tcode_mask & tcode_mask)
431 packet_buffer_put(&client->buffer,
432 lynx->rcv_buffer, length + 4);
433
434 spin_unlock(&lynx->client_list_lock);
435 }
436
437 static void
bus_reset_irq_handler(struct pcilynx * lynx)438 bus_reset_irq_handler(struct pcilynx *lynx)
439 {
440 struct client *client;
441 struct timespec64 ts64;
442 u32 timestamp;
443
444 ktime_get_real_ts64(&ts64);
445 timestamp = ts64.tv_nsec / NSEC_PER_USEC;
446
447 spin_lock(&lynx->client_list_lock);
448
449 list_for_each_entry(client, &lynx->client_list, link)
450 packet_buffer_put(&client->buffer, ×tamp, 4);
451
452 spin_unlock(&lynx->client_list_lock);
453 }
454
455 static irqreturn_t
irq_handler(int irq,void * device)456 irq_handler(int irq, void *device)
457 {
458 struct pcilynx *lynx = device;
459 u32 pci_int_status;
460
461 pci_int_status = reg_read(lynx, PCI_INT_STATUS);
462
463 if (pci_int_status == ~0)
464 /* Card was ejected. */
465 return IRQ_NONE;
466
467 if ((pci_int_status & PCI_INT_INT_PEND) == 0)
468 /* Not our interrupt, bail out quickly. */
469 return IRQ_NONE;
470
471 if ((pci_int_status & PCI_INT_P1394_INT) != 0) {
472 u32 link_int_status;
473
474 link_int_status = reg_read(lynx, LINK_INT_STATUS);
475 reg_write(lynx, LINK_INT_STATUS, link_int_status);
476
477 if ((link_int_status & LINK_INT_PHY_BUSRESET) > 0)
478 bus_reset_irq_handler(lynx);
479 }
480
481 /* Clear the PCI_INT_STATUS register only after clearing the
482 * LINK_INT_STATUS register; otherwise the PCI_INT_P1394 will
483 * be set again immediately. */
484
485 reg_write(lynx, PCI_INT_STATUS, pci_int_status);
486
487 if ((pci_int_status & PCI_INT_DMA0_HLT) > 0) {
488 packet_irq_handler(lynx);
489 run_pcl(lynx, lynx->rcv_start_pcl_bus, 0);
490 }
491
492 return IRQ_HANDLED;
493 }
494
495 static void
remove_card(struct pci_dev * dev)496 remove_card(struct pci_dev *dev)
497 {
498 struct pcilynx *lynx = pci_get_drvdata(dev);
499 struct client *client;
500
501 mutex_lock(&card_mutex);
502 list_del_init(&lynx->link);
503 misc_deregister(&lynx->misc);
504 mutex_unlock(&card_mutex);
505
506 reg_write(lynx, PCI_INT_ENABLE, 0);
507 free_irq(lynx->pci_device->irq, lynx);
508
509 spin_lock_irq(&lynx->client_list_lock);
510 list_for_each_entry(client, &lynx->client_list, link)
511 wake_up_interruptible(&client->buffer.wait);
512 spin_unlock_irq(&lynx->client_list_lock);
513
514 pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
515 lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
516 pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
517 lynx->rcv_pcl, lynx->rcv_pcl_bus);
518 pci_free_consistent(lynx->pci_device, PAGE_SIZE,
519 lynx->rcv_buffer, lynx->rcv_buffer_bus);
520
521 iounmap(lynx->registers);
522 pci_disable_device(dev);
523 lynx_put(lynx);
524 }
525
526 #define RCV_BUFFER_SIZE (16 * 1024)
527
528 static int
add_card(struct pci_dev * dev,const struct pci_device_id * unused)529 add_card(struct pci_dev *dev, const struct pci_device_id *unused)
530 {
531 struct pcilynx *lynx;
532 u32 p, end;
533 int ret, i;
534
535 if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
536 dev_err(&dev->dev,
537 "DMA address limits not supported for PCILynx hardware\n");
538 return -ENXIO;
539 }
540 if (pci_enable_device(dev)) {
541 dev_err(&dev->dev, "Failed to enable PCILynx hardware\n");
542 return -ENXIO;
543 }
544 pci_set_master(dev);
545
546 lynx = kzalloc(sizeof *lynx, GFP_KERNEL);
547 if (lynx == NULL) {
548 dev_err(&dev->dev, "Failed to allocate control structure\n");
549 ret = -ENOMEM;
550 goto fail_disable;
551 }
552 lynx->pci_device = dev;
553 pci_set_drvdata(dev, lynx);
554
555 spin_lock_init(&lynx->client_list_lock);
556 INIT_LIST_HEAD(&lynx->client_list);
557 kref_init(&lynx->kref);
558
559 lynx->registers = ioremap(pci_resource_start(dev, 0),
560 PCILYNX_MAX_REGISTER);
561 if (lynx->registers == NULL) {
562 dev_err(&dev->dev, "Failed to map registers\n");
563 ret = -ENOMEM;
564 goto fail_deallocate_lynx;
565 }
566
567 lynx->rcv_start_pcl = pci_alloc_consistent(lynx->pci_device,
568 sizeof(struct pcl), &lynx->rcv_start_pcl_bus);
569 lynx->rcv_pcl = pci_alloc_consistent(lynx->pci_device,
570 sizeof(struct pcl), &lynx->rcv_pcl_bus);
571 lynx->rcv_buffer = pci_alloc_consistent(lynx->pci_device,
572 RCV_BUFFER_SIZE, &lynx->rcv_buffer_bus);
573 if (lynx->rcv_start_pcl == NULL ||
574 lynx->rcv_pcl == NULL ||
575 lynx->rcv_buffer == NULL) {
576 dev_err(&dev->dev, "Failed to allocate receive buffer\n");
577 ret = -ENOMEM;
578 goto fail_deallocate_buffers;
579 }
580 lynx->rcv_start_pcl->next = cpu_to_le32(lynx->rcv_pcl_bus);
581 lynx->rcv_pcl->next = cpu_to_le32(PCL_NEXT_INVALID);
582 lynx->rcv_pcl->async_error_next = cpu_to_le32(PCL_NEXT_INVALID);
583
584 lynx->rcv_pcl->buffer[0].control =
585 cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2044);
586 lynx->rcv_pcl->buffer[0].pointer =
587 cpu_to_le32(lynx->rcv_buffer_bus + 4);
588 p = lynx->rcv_buffer_bus + 2048;
589 end = lynx->rcv_buffer_bus + RCV_BUFFER_SIZE;
590 for (i = 1; p < end; i++, p += 2048) {
591 lynx->rcv_pcl->buffer[i].control =
592 cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2048);
593 lynx->rcv_pcl->buffer[i].pointer = cpu_to_le32(p);
594 }
595 lynx->rcv_pcl->buffer[i - 1].control |= cpu_to_le32(PCL_LAST_BUFF);
596
597 reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
598 /* Fix buggy cards with autoboot pin not tied low: */
599 reg_write(lynx, DMA0_CHAN_CTRL, 0);
600 reg_write(lynx, DMA_GLOBAL_REGISTER, 0x00 << 24);
601
602 #if 0
603 /* now, looking for PHY register set */
604 if ((get_phy_reg(lynx, 2) & 0xe0) == 0xe0) {
605 lynx->phyic.reg_1394a = 1;
606 PRINT(KERN_INFO, lynx->id,
607 "found 1394a conform PHY (using extended register set)");
608 lynx->phyic.vendor = get_phy_vendorid(lynx);
609 lynx->phyic.product = get_phy_productid(lynx);
610 } else {
611 lynx->phyic.reg_1394a = 0;
612 PRINT(KERN_INFO, lynx->id, "found old 1394 PHY");
613 }
614 #endif
615
616 /* Setup the general receive FIFO max size. */
617 reg_write(lynx, FIFO_SIZES, 255);
618
619 reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
620
621 reg_write(lynx, LINK_INT_ENABLE,
622 LINK_INT_PHY_TIME_OUT | LINK_INT_PHY_REG_RCVD |
623 LINK_INT_PHY_BUSRESET | LINK_INT_IT_STUCK |
624 LINK_INT_AT_STUCK | LINK_INT_SNTRJ |
625 LINK_INT_TC_ERR | LINK_INT_GRF_OVER_FLOW |
626 LINK_INT_ITF_UNDER_FLOW | LINK_INT_ATF_UNDER_FLOW);
627
628 /* Disable the L flag in self ID packets. */
629 set_phy_reg(lynx, 4, 0);
630
631 /* Put this baby into snoop mode */
632 reg_set_bits(lynx, LINK_CONTROL, LINK_CONTROL_SNOOP_ENABLE);
633
634 run_pcl(lynx, lynx->rcv_start_pcl_bus, 0);
635
636 if (request_irq(dev->irq, irq_handler, IRQF_SHARED,
637 driver_name, lynx)) {
638 dev_err(&dev->dev,
639 "Failed to allocate shared interrupt %d\n", dev->irq);
640 ret = -EIO;
641 goto fail_deallocate_buffers;
642 }
643
644 lynx->misc.parent = &dev->dev;
645 lynx->misc.minor = MISC_DYNAMIC_MINOR;
646 lynx->misc.name = "nosy";
647 lynx->misc.fops = &nosy_ops;
648
649 mutex_lock(&card_mutex);
650 ret = misc_register(&lynx->misc);
651 if (ret) {
652 dev_err(&dev->dev, "Failed to register misc char device\n");
653 mutex_unlock(&card_mutex);
654 goto fail_free_irq;
655 }
656 list_add_tail(&lynx->link, &card_list);
657 mutex_unlock(&card_mutex);
658
659 dev_info(&dev->dev,
660 "Initialized PCILynx IEEE1394 card, irq=%d\n", dev->irq);
661
662 return 0;
663
664 fail_free_irq:
665 reg_write(lynx, PCI_INT_ENABLE, 0);
666 free_irq(lynx->pci_device->irq, lynx);
667
668 fail_deallocate_buffers:
669 if (lynx->rcv_start_pcl)
670 pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
671 lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
672 if (lynx->rcv_pcl)
673 pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
674 lynx->rcv_pcl, lynx->rcv_pcl_bus);
675 if (lynx->rcv_buffer)
676 pci_free_consistent(lynx->pci_device, PAGE_SIZE,
677 lynx->rcv_buffer, lynx->rcv_buffer_bus);
678 iounmap(lynx->registers);
679
680 fail_deallocate_lynx:
681 kfree(lynx);
682
683 fail_disable:
684 pci_disable_device(dev);
685
686 return ret;
687 }
688
689 static struct pci_device_id pci_table[] = {
690 {
691 .vendor = PCI_VENDOR_ID_TI,
692 .device = PCI_DEVICE_ID_TI_PCILYNX,
693 .subvendor = PCI_ANY_ID,
694 .subdevice = PCI_ANY_ID,
695 },
696 { } /* Terminating entry */
697 };
698
699 MODULE_DEVICE_TABLE(pci, pci_table);
700
701 static struct pci_driver lynx_pci_driver = {
702 .name = driver_name,
703 .id_table = pci_table,
704 .probe = add_card,
705 .remove = remove_card,
706 };
707
708 module_pci_driver(lynx_pci_driver);
709
710 MODULE_AUTHOR("Kristian Hoegsberg");
711 MODULE_DESCRIPTION("Snoop mode driver for TI pcilynx 1394 controllers");
712 MODULE_LICENSE("GPL");
713