1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2014-2017 Phytec Messtechnik GmbH 4 * Author: Wadim Egorov <w.egorov@phytec.de> 5 * Teresa Remmet <t.remmet@phytec.de> 6 */ 7 8#include <dt-bindings/input/input.h> 9 10/ { 11 model = "Phytec AM335x PCM-953"; 12 compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"; 13 14 /* Power */ 15 regulators { 16 vcc3v3: fixedregulator@1 { 17 compatible = "regulator-fixed"; 18 regulator-name = "vcc3v3"; 19 regulator-min-microvolt = <3300000>; 20 regulator-max-microvolt = <3300000>; 21 regulator-boot-on; 22 }; 23 24 vcc1v8: fixedregulator@2 { 25 compatible = "regulator-fixed"; 26 regulator-name = "vcc1v8"; 27 regulator-min-microvolt = <1800000>; 28 regulator-max-microvolt = <1800000>; 29 regulator-boot-on; 30 }; 31 }; 32 33 /* User IO */ 34 user_leds: user_leds { 35 compatible = "gpio-leds"; 36 pinctrl-names = "default"; 37 pinctrl-0 = <&user_leds_pins>; 38 39 user-led0 { 40 gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; 41 linux,default-trigger = "gpio"; 42 default-state = "on"; 43 }; 44 45 user-led1 { 46 gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; 47 linux,default-trigger = "gpio"; 48 default-state = "on"; 49 }; 50 }; 51 52 user_buttons: user_buttons { 53 compatible = "gpio-keys"; 54 pinctrl-names = "default"; 55 pinctrl-0 = <&user_buttons_pins>; 56 57 button@0 { 58 label = "home"; 59 linux,code = <KEY_HOME>; 60 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; 61 wakeup-source; 62 }; 63 64 button@1 { 65 label = "menu"; 66 linux,code = <KEY_MENU>; 67 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; 68 wakeup-source; 69 }; 70 71 }; 72}; 73 74&am33xx_pinmux { 75 user_buttons_pins: pinmux_user_buttons { 76 pinctrl-single,pins = < 77 AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */ 78 AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */ 79 >; 80 }; 81 82 user_leds_pins: pinmux_user_leds { 83 pinctrl-single,pins = < 84 AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */ 85 AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */ 86 >; 87 }; 88}; 89 90/* CAN */ 91&am33xx_pinmux { 92 dcan1_pins: pinmux_dcan1 { 93 pinctrl-single,pins = < 94 AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ 95 AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ 96 >; 97 }; 98}; 99 100&dcan1 { 101 pinctrl-names = "default"; 102 pinctrl-0 = <&dcan1_pins>; 103 status = "okay"; 104}; 105 106/* Ethernet */ 107&am33xx_pinmux { 108 ethernet1_pins: pinmux_ethernet1 { 109 pinctrl-single,pins = < 110 AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ 111 AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ 112 AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ 113 AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ 114 AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ 115 AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ 116 AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ 117 AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ 118 AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ 119 AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ 120 AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ 121 AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ 122 >; 123 }; 124}; 125 126&cpsw_emac1 { 127 phy-handle = <&phy1>; 128 phy-mode = "rgmii-id"; 129 dual_emac_res_vlan = <2>; 130 status = "okay"; 131}; 132 133&davinci_mdio { 134 phy1: ethernet-phy@2 { 135 reg = <2>; 136 }; 137}; 138 139&mac { 140 slaves = <2>; 141 pinctrl-names = "default"; 142 pinctrl-0 = <ðernet0_pins ðernet1_pins>; 143 dual_emac; 144}; 145 146/* Misc */ 147&am33xx_pinmux { 148 pinctrl-names = "default"; 149 pinctrl-0 = <&cb_gpio_pins>; 150 151 cb_gpio_pins: pinmux_cb_gpio { 152 pinctrl-single,pins = < 153 AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ 154 AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ 155 >; 156 }; 157}; 158 159/* MMC */ 160&am33xx_pinmux { 161 mmc1_pins: pinmux_mmc1_pins { 162 pinctrl-single,pins = < 163 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) 164 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) 165 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) 166 AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) 167 AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) 168 AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) 169 AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ 170 >; 171 }; 172}; 173 174&mmc1 { 175 vmmc-supply = <&vcc3v3>; 176 bus-width = <4>; 177 pinctrl-names = "default"; 178 pinctrl-0 = <&mmc1_pins>; 179 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; 180 status = "okay"; 181}; 182 183/* UARTs */ 184&am33xx_pinmux { 185 uart0_pins: pinmux_uart0 { 186 pinctrl-single,pins = < 187 AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) 188 AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) 189 >; 190 }; 191 192 uart1_pins: pinmux_uart1 { 193 pinctrl-single,pins = < 194 AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) 195 AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) 196 AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) 197 AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) 198 >; 199 }; 200 201 uart2_pins: pinmux_uart2 { 202 pinctrl-single,pins = < 203 AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ 204 AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ 205 >; 206 }; 207 208 uart3_pins: pinmux_uart3 { 209 pinctrl-single,pins = < 210 AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */ 211 AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */ 212 >; 213 }; 214}; 215 216&uart0 { 217 pinctrl-names = "default"; 218 pinctrl-0 = <&uart0_pins>; 219 status = "okay"; 220}; 221 222&uart1 { 223 pinctrl-names = "default"; 224 pinctrl-0 = <&uart1_pins>; 225}; 226 227&uart2 { 228 pinctrl-names = "default"; 229 pinctrl-0 = <&uart2_pins>; 230 status = "okay"; 231}; 232 233&uart3 { 234 pinctrl-names = "default"; 235 pinctrl-0 = <&uart3_pins>; 236 status = "okay"; 237}; 238 239/* USB */ 240&usb1 { 241 dr_mode = "host"; 242}; 243