1/* 2 * Copyright 2015 Linaro Ltd 3 * 4 * Permission is hereby granted, free of charge, to any person obtaining a copy 5 * of this software and associated documentation files (the "Software"), to deal 6 * in the Software without restriction, including without limitation the rights 7 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 8 * copies of the Software, and to permit persons to whom the Software is 9 * furnished to do so, subject to the following conditions: 10 * 11 * The above copyright notice and this permission notice shall be included in 12 * all copies or substantial portions of the Software. 13 * 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 17 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 18 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 19 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 20 * THE SOFTWARE. 21 */ 22 23/dts-v1/; 24#include <dt-bindings/interrupt-controller/irq.h> 25#include <dt-bindings/gpio/gpio.h> 26 27/ { 28 #address-cells = <1>; 29 #size-cells = <1>; 30 model = "ARM RealView PB11MPcore"; 31 compatible = "arm,realview-pb11mp"; 32 33 chosen { }; 34 35 aliases { 36 serial0 = &pb11mp_serial0; 37 serial1 = &pb11mp_serial1; 38 serial2 = &pb11mp_serial2; 39 serial3 = &pb11mp_serial3; 40 }; 41 42 memory { 43 device_type = "memory"; 44 /* 45 * The PB11MPCore has 512 MiB memory @ 0x70000000 46 * and the first 256 are also remapped @ 0x00000000 47 */ 48 reg = <0x70000000 0x20000000>; 49 }; 50 51 cpus { 52 #address-cells = <1>; 53 #size-cells = <0>; 54 enable-method = "arm,realview-smp"; 55 56 MP11_0: cpu@0 { 57 device_type = "cpu"; 58 compatible = "arm,arm11mpcore"; 59 reg = <0>; 60 next-level-cache = <&L2>; 61 }; 62 63 MP11_1: cpu@1 { 64 device_type = "cpu"; 65 compatible = "arm,arm11mpcore"; 66 reg = <1>; 67 next-level-cache = <&L2>; 68 }; 69 70 MP11_2: cpu@2 { 71 device_type = "cpu"; 72 compatible = "arm,arm11mpcore"; 73 reg = <2>; 74 next-level-cache = <&L2>; 75 }; 76 77 MP11_3: cpu@3 { 78 device_type = "cpu"; 79 compatible = "arm,arm11mpcore"; 80 reg = <3>; 81 next-level-cache = <&L2>; 82 }; 83 }; 84 85 /* Primary TestChip GIC synthesized with the CPU */ 86 intc_tc11mp: interrupt-controller@1f000100 { 87 compatible = "arm,tc11mp-gic"; 88 #interrupt-cells = <3>; 89 #address-cells = <1>; 90 interrupt-controller; 91 reg = <0x1f001000 0x1000>, 92 <0x1f000100 0x100>; 93 }; 94 95 L2: cache-controller { 96 compatible = "arm,l220-cache"; 97 reg = <0x1f002000 0x1000>; 98 interrupt-parent = <&intc_tc11mp>; 99 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, 100 <0 30 IRQ_TYPE_LEVEL_HIGH>, 101 <0 31 IRQ_TYPE_LEVEL_HIGH>; 102 cache-unified; 103 cache-level = <2>; 104 /* 105 * Override default cache size, sets and 106 * associativity as these may be erroneously set 107 * up by boot loader(s), probably for safety 108 * since th outer sync operation can cause the 109 * cache to hang unless disabled. 110 */ 111 cache-size = <1048576>; // 1MB 112 cache-sets = <4096>; 113 cache-line-size = <32>; 114 arm,shared-override; 115 arm,parity-enable; 116 arm,outer-sync-disable; 117 }; 118 119 scu@1f000000 { 120 compatible = "arm,arm11mp-scu"; 121 reg = <0x1f000000 0x100>; 122 }; 123 124 timer@1f000600 { 125 compatible = "arm,arm11mp-twd-timer"; 126 reg = <0x1f000600 0x20>; 127 interrupt-parent = <&intc_tc11mp>; 128 interrupts = <1 13 0xf04>; 129 }; 130 131 watchdog@1f000620 { 132 compatible = "arm,arm11mp-twd-wdt"; 133 reg = <0x1f000620 0x20>; 134 interrupt-parent = <&intc_tc11mp>; 135 interrupts = <1 14 0xf04>; 136 }; 137 138 /* PMU with one IRQ line per core */ 139 pmu { 140 compatible = "arm,arm11mpcore-pmu"; 141 interrupt-parent = <&intc_tc11mp>; 142 interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>, 143 <0 18 IRQ_TYPE_LEVEL_HIGH>, 144 <0 19 IRQ_TYPE_LEVEL_HIGH>, 145 <0 20 IRQ_TYPE_LEVEL_HIGH>; 146 interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>; 147 }; 148 149 /* The voltage to the MMC card is hardwired at 3.3V */ 150 vmmc: regulator-vmmc { 151 compatible = "regulator-fixed"; 152 regulator-name = "vmmc"; 153 regulator-min-microvolt = <3300000>; 154 regulator-max-microvolt = <3300000>; 155 regulator-boot-on; 156 }; 157 158 veth: regulator-veth { 159 compatible = "regulator-fixed"; 160 regulator-name = "veth"; 161 regulator-min-microvolt = <3300000>; 162 regulator-max-microvolt = <3300000>; 163 regulator-boot-on; 164 }; 165 166 xtal24mhz: xtal24mhz@24M { 167 #clock-cells = <0>; 168 compatible = "fixed-clock"; 169 clock-frequency = <24000000>; 170 }; 171 172 refclk32khz: refclk32khz { 173 compatible = "fixed-clock"; 174 #clock-cells = <0>; 175 clock-frequency = <32768>; 176 }; 177 178 timclk: timclk@1M { 179 #clock-cells = <0>; 180 compatible = "fixed-factor-clock"; 181 clock-div = <24>; 182 clock-mult = <1>; 183 clocks = <&xtal24mhz>; 184 }; 185 186 mclk: mclk@24M { 187 #clock-cells = <0>; 188 compatible = "fixed-factor-clock"; 189 clock-div = <1>; 190 clock-mult = <1>; 191 clocks = <&xtal24mhz>; 192 }; 193 194 kmiclk: kmiclk@24M { 195 #clock-cells = <0>; 196 compatible = "fixed-factor-clock"; 197 clock-div = <1>; 198 clock-mult = <1>; 199 clocks = <&xtal24mhz>; 200 }; 201 202 sspclk: sspclk@24M { 203 #clock-cells = <0>; 204 compatible = "fixed-factor-clock"; 205 clock-div = <1>; 206 clock-mult = <1>; 207 clocks = <&xtal24mhz>; 208 }; 209 210 uartclk: uartclk@24M { 211 #clock-cells = <0>; 212 compatible = "fixed-factor-clock"; 213 clock-div = <1>; 214 clock-mult = <1>; 215 clocks = <&xtal24mhz>; 216 }; 217 218 wdogclk: wdogclk@24M { 219 #clock-cells = <0>; 220 compatible = "fixed-factor-clock"; 221 clock-div = <1>; 222 clock-mult = <1>; 223 clocks = <&xtal24mhz>; 224 }; 225 226 /* FIXME: this actually hangs off the PLL clocks */ 227 pclk: pclk@0 { 228 #clock-cells = <0>; 229 compatible = "fixed-clock"; 230 clock-frequency = <0>; 231 }; 232 233 flash0@40000000 { 234 /* 2 * 32MiB NOR Flash memory */ 235 compatible = "arm,versatile-flash", "cfi-flash"; 236 reg = <0x40000000 0x04000000>; 237 bank-width = <4>; 238 partitions { 239 compatible = "arm,arm-firmware-suite"; 240 }; 241 }; 242 243 flash1@44000000 { 244 // 2 * 32MiB NOR Flash memory 245 compatible = "arm,versatile-flash", "cfi-flash"; 246 reg = <0x44000000 0x04000000>; 247 bank-width = <4>; 248 partitions { 249 compatible = "arm,arm-firmware-suite"; 250 }; 251 }; 252 253 bridge { 254 compatible = "ti,ths8134a", "ti,ths8134"; 255 #address-cells = <1>; 256 #size-cells = <0>; 257 258 ports { 259 #address-cells = <1>; 260 #size-cells = <0>; 261 262 port@0 { 263 reg = <0>; 264 265 vga_bridge_in: endpoint { 266 remote-endpoint = <&clcd_pads>; 267 }; 268 }; 269 270 port@1 { 271 reg = <1>; 272 273 vga_bridge_out: endpoint { 274 remote-endpoint = <&vga_con_in>; 275 }; 276 }; 277 }; 278 }; 279 280 vga { 281 /* 282 * This DDC I2C is connected directly to the DVI portions 283 * of the connector, so it's not really working when the 284 * monitor is connected to the VGA connector. 285 */ 286 compatible = "vga-connector"; 287 ddc-i2c-bus = <&i2c1>; 288 289 port { 290 vga_con_in: endpoint { 291 remote-endpoint = <&vga_bridge_out>; 292 }; 293 }; 294 }; 295 296 soc { 297 #address-cells = <1>; 298 #size-cells = <1>; 299 compatible = "arm,realview-pb11mp-soc", "simple-bus"; 300 regmap = <&pb11mp_syscon>; 301 ranges; 302 303 pb11mp_syscon: syscon@10000000 { 304 compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd"; 305 reg = <0x10000000 0x1000>; 306 307 led@08.0 { 308 compatible = "register-bit-led"; 309 offset = <0x08>; 310 mask = <0x01>; 311 label = "versatile:0"; 312 linux,default-trigger = "heartbeat"; 313 default-state = "on"; 314 }; 315 led@08.1 { 316 compatible = "register-bit-led"; 317 offset = <0x08>; 318 mask = <0x02>; 319 label = "versatile:1"; 320 linux,default-trigger = "mmc0"; 321 default-state = "off"; 322 }; 323 led@08.2 { 324 compatible = "register-bit-led"; 325 offset = <0x08>; 326 mask = <0x04>; 327 label = "versatile:2"; 328 linux,default-trigger = "cpu0"; 329 default-state = "off"; 330 }; 331 led@08.3 { 332 compatible = "register-bit-led"; 333 offset = <0x08>; 334 mask = <0x08>; 335 label = "versatile:3"; 336 linux,default-trigger = "cpu1"; 337 default-state = "off"; 338 }; 339 led@08.4 { 340 compatible = "register-bit-led"; 341 offset = <0x08>; 342 mask = <0x10>; 343 label = "versatile:4"; 344 linux,default-trigger = "cpu2"; 345 default-state = "off"; 346 }; 347 led@08.5 { 348 compatible = "register-bit-led"; 349 offset = <0x08>; 350 mask = <0x20>; 351 label = "versatile:5"; 352 linux,default-trigger = "cpu3"; 353 default-state = "off"; 354 }; 355 led@08.6 { 356 compatible = "register-bit-led"; 357 offset = <0x08>; 358 mask = <0x40>; 359 label = "versatile:6"; 360 default-state = "off"; 361 }; 362 led@08.7 { 363 compatible = "register-bit-led"; 364 offset = <0x08>; 365 mask = <0x80>; 366 label = "versatile:7"; 367 default-state = "off"; 368 }; 369 370 oscclk0: osc0@0c { 371 compatible = "arm,syscon-icst307"; 372 #clock-cells = <0>; 373 lock-offset = <0x20>; 374 vco-offset = <0x0C>; 375 clocks = <&xtal24mhz>; 376 }; 377 oscclk1: osc1@10 { 378 compatible = "arm,syscon-icst307"; 379 #clock-cells = <0>; 380 lock-offset = <0x20>; 381 vco-offset = <0x10>; 382 clocks = <&xtal24mhz>; 383 }; 384 oscclk2: osc2@14 { 385 compatible = "arm,syscon-icst307"; 386 #clock-cells = <0>; 387 lock-offset = <0x20>; 388 vco-offset = <0x14>; 389 clocks = <&xtal24mhz>; 390 }; 391 oscclk3: osc3@18 { 392 compatible = "arm,syscon-icst307"; 393 #clock-cells = <0>; 394 lock-offset = <0x20>; 395 vco-offset = <0x18>; 396 clocks = <&xtal24mhz>; 397 }; 398 oscclk4: osc4@1c { 399 compatible = "arm,syscon-icst307"; 400 #clock-cells = <0>; 401 lock-offset = <0x20>; 402 vco-offset = <0x1c>; 403 clocks = <&xtal24mhz>; 404 }; 405 oscclk5: osc5@d4 { 406 compatible = "arm,syscon-icst307"; 407 #clock-cells = <0>; 408 lock-offset = <0x20>; 409 vco-offset = <0xd4>; 410 clocks = <&xtal24mhz>; 411 }; 412 oscclk6: osc6@d8 { 413 compatible = "arm,syscon-icst307"; 414 #clock-cells = <0>; 415 lock-offset = <0x20>; 416 vco-offset = <0xd8>; 417 clocks = <&xtal24mhz>; 418 }; 419 }; 420 421 sp810_syscon: sysctl@10001000 { 422 compatible = "arm,sp810", "arm,primecell"; 423 reg = <0x10001000 0x1000>; 424 clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>; 425 clock-names = "refclk", "timclk", "apb_pclk"; 426 #clock-cells = <1>; 427 clock-output-names = "timerclk0", 428 "timerclk1", 429 "timerclk2", 430 "timerclk3"; 431 assigned-clocks = <&sp810_syscon 0>, 432 <&sp810_syscon 1>, 433 <&sp810_syscon 2>, 434 <&sp810_syscon 3>; 435 assigned-clock-parents = <&timclk>, 436 <&timclk>, 437 <&timclk>, 438 <&timclk>; 439 }; 440 441 i2c0: i2c@10002000 { 442 #address-cells = <1>; 443 #size-cells = <0>; 444 compatible = "arm,versatile-i2c"; 445 reg = <0x10002000 0x1000>; 446 447 rtc@68 { 448 compatible = "dallas,ds1338"; 449 reg = <0x68>; 450 }; 451 }; 452 453 aaci: aaci@10004000 { 454 compatible = "arm,pl041", "arm,primecell"; 455 reg = <0x10004000 0x1000>; 456 interrupt-parent = <&intc_tc11mp>; 457 interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; 458 clocks = <&pclk>; 459 clock-names = "apb_pclk"; 460 }; 461 462 mci: mmcsd@10005000 { 463 compatible = "arm,pl18x", "arm,primecell"; 464 reg = <0x10005000 0x1000>; 465 interrupt-parent = <&intc_tc11mp>; 466 interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>, 467 <0 15 IRQ_TYPE_LEVEL_HIGH>; 468 /* Due to frequent FIFO overruns, use just 500 kHz */ 469 max-frequency = <500000>; 470 bus-width = <4>; 471 cap-sd-highspeed; 472 cap-mmc-highspeed; 473 clocks = <&mclk>, <&pclk>; 474 clock-names = "mclk", "apb_pclk"; 475 vmmc-supply = <&vmmc>; 476 cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; 477 wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; 478 }; 479 480 kmi0: kmi@10006000 { 481 compatible = "arm,pl050", "arm,primecell"; 482 reg = <0x10006000 0x1000>; 483 interrupt-parent = <&intc_tc11mp>; 484 interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; 485 clocks = <&kmiclk>, <&pclk>; 486 clock-names = "KMIREFCLK", "apb_pclk"; 487 }; 488 489 kmi1: kmi@10007000 { 490 compatible = "arm,pl050", "arm,primecell"; 491 reg = <0x10007000 0x1000>; 492 interrupt-parent = <&intc_tc11mp>; 493 interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; 494 clocks = <&kmiclk>, <&pclk>; 495 clock-names = "KMIREFCLK", "apb_pclk"; 496 }; 497 498 pb11mp_serial0: serial@10009000 { 499 compatible = "arm,pl011", "arm,primecell"; 500 reg = <0x10009000 0x1000>; 501 interrupt-parent = <&intc_tc11mp>; 502 interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; 503 clocks = <&uartclk>, <&pclk>; 504 clock-names = "uartclk", "apb_pclk"; 505 }; 506 507 pb11mp_serial1: serial@1000a000 { 508 compatible = "arm,pl011", "arm,primecell"; 509 reg = <0x1000a000 0x1000>; 510 interrupt-parent = <&intc_tc11mp>; 511 interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; 512 clocks = <&uartclk>, <&pclk>; 513 clock-names = "uartclk", "apb_pclk"; 514 }; 515 516 pb11mp_serial2: serial@1000b000 { 517 compatible = "arm,pl011", "arm,primecell"; 518 reg = <0x1000b000 0x1000>; 519 interrupt-parent = <&intc_pb11mp>; 520 interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; 521 clocks = <&uartclk>, <&pclk>; 522 clock-names = "uartclk", "apb_pclk"; 523 }; 524 525 pb11mp_serial3: serial@1000c000 { 526 compatible = "arm,pl011", "arm,primecell"; 527 reg = <0x1000c000 0x1000>; 528 interrupt-parent = <&intc_pb11mp>; 529 interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; 530 clocks = <&uartclk>, <&pclk>; 531 clock-names = "uartclk", "apb_pclk"; 532 }; 533 534 spi@1000d000 { 535 compatible = "arm,pl022", "arm,primecell"; 536 reg = <0x1000d000 0x1000>; 537 interrupt-parent = <&intc_pb11mp>; 538 interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; 539 clocks = <&sspclk>, <&pclk>; 540 clock-names = "SSPCLK", "apb_pclk"; 541 }; 542 543 watchdog@1000f000 { 544 compatible = "arm,sp805", "arm,primecell"; 545 reg = <0x1000f000 0x1000>; 546 interrupt-parent = <&intc_pb11mp>; 547 interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; 548 clocks = <&wdogclk>, <&pclk>; 549 clock-names = "wdog_clk", "apb_pclk"; 550 status = "disabled"; 551 }; 552 553 watchdog@10010000 { 554 compatible = "arm,sp805", "arm,primecell"; 555 reg = <0x10010000 0x1000>; 556 interrupt-parent = <&intc_pb11mp>; 557 interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>; 558 clocks = <&wdogclk>, <&pclk>; 559 clock-names = "wdog_clk", "apb_pclk"; 560 }; 561 562 timer01: timer@10011000 { 563 compatible = "arm,sp804", "arm,primecell"; 564 reg = <0x10011000 0x1000>; 565 interrupt-parent = <&intc_tc11mp>; 566 interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>; 567 arm,sp804-has-irq = <1>; 568 clocks = <&sp810_syscon 0>, 569 <&sp810_syscon 1>, 570 <&pclk>; 571 clock-names = "timer0clk", 572 "timer1clk", 573 "apb_pclk"; 574 }; 575 576 timer23: timer@10012000 { 577 compatible = "arm,sp804", "arm,primecell"; 578 reg = <0x10012000 0x1000>; 579 interrupt-parent = <&intc_tc11mp>; 580 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; 581 arm,sp804-has-irq = <1>; 582 clocks = <&sp810_syscon 2>, 583 <&sp810_syscon 3>, 584 <&pclk>; 585 clock-names = "timer0clk", 586 "timer1clk", 587 "apb_pclk"; 588 }; 589 590 gpio0: gpio@10013000 { 591 compatible = "arm,pl061", "arm,primecell"; 592 reg = <0x10013000 0x1000>; 593 gpio-controller; 594 interrupt-parent = <&intc_pb11mp>; 595 interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; 596 #gpio-cells = <2>; 597 interrupt-controller; 598 #interrupt-cells = <2>; 599 clocks = <&pclk>; 600 clock-names = "apb_pclk"; 601 }; 602 603 gpio1: gpio@10014000 { 604 compatible = "arm,pl061", "arm,primecell"; 605 reg = <0x10014000 0x1000>; 606 gpio-controller; 607 interrupt-parent = <&intc_pb11mp>; 608 interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; 609 #gpio-cells = <2>; 610 interrupt-controller; 611 #interrupt-cells = <2>; 612 clocks = <&pclk>; 613 clock-names = "apb_pclk"; 614 }; 615 616 gpio2: gpio@10015000 { 617 compatible = "arm,pl061", "arm,primecell"; 618 reg = <0x10015000 0x1000>; 619 gpio-controller; 620 interrupt-parent = <&intc_pb11mp>; 621 interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; 622 #gpio-cells = <2>; 623 interrupt-controller; 624 #interrupt-cells = <2>; 625 clocks = <&pclk>; 626 clock-names = "apb_pclk"; 627 }; 628 629 i2c1: i2c@10016000 { 630 #address-cells = <1>; 631 #size-cells = <0>; 632 compatible = "arm,versatile-i2c"; 633 reg = <0x10016000 0x1000>; 634 }; 635 636 rtc: rtc@10017000 { 637 compatible = "arm,pl031", "arm,primecell"; 638 reg = <0x10017000 0x1000>; 639 interrupt-parent = <&intc_tc11mp>; 640 interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; 641 clocks = <&pclk>; 642 clock-names = "apb_pclk"; 643 }; 644 645 timer45: timer@10018000 { 646 compatible = "arm,sp804", "arm,primecell"; 647 reg = <0x10018000 0x1000>; 648 clocks = <&timclk>, <&timclk>, <&pclk>; 649 clock-names = "timer0clk", "timer1clk", "apb_pclk"; 650 status = "disabled"; 651 }; 652 653 timer67: timer@10019000 { 654 compatible = "arm,sp804", "arm,primecell"; 655 reg = <0x10019000 0x1000>; 656 clocks = <&timclk>, <&timclk>, <&pclk>; 657 clock-names = "timer0clk", "timer1clk", "apb_pclk"; 658 status = "disabled"; 659 }; 660 661 662 clcd@10020000 { 663 compatible = "arm,pl111", "arm,primecell"; 664 reg = <0x10020000 0x1000>; 665 interrupt-parent = <&intc_pb11mp>; 666 interrupt-names = "combined"; 667 interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; 668 clocks = <&oscclk4>, <&pclk>; 669 clock-names = "clcdclk", "apb_pclk"; 670 /* 1024x768 16bpp @65MHz works fine */ 671 max-memory-bandwidth = <95000000>; 672 673 port { 674 clcd_pads: endpoint { 675 remote-endpoint = <&vga_bridge_in>; 676 arm,pl11x,tft-r0g0b0-pads = <0 8 16>; 677 }; 678 }; 679 }; 680 681 /* 682 * This GIC on the Platform Baseboard is cascaded off the 683 * TestChip GIC 684 */ 685 intc_pb11mp: interrupt-controller@1e000000 { 686 compatible = "arm,arm11mp-gic"; 687 #interrupt-cells = <3>; 688 #address-cells = <1>; 689 interrupt-controller; 690 reg = <0x1e001000 0x1000>, 691 <0x1e000000 0x100>; 692 interrupt-parent = <&intc_tc11mp>; 693 interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; 694 }; 695 696 /* SMSC 9118 ethernet with PHY and EEPROM */ 697 ethernet@4e000000 { 698 compatible = "smsc,lan9118", "smsc,lan9115"; 699 reg = <0x4e000000 0x10000>; 700 interrupt-parent = <&intc_tc11mp>; 701 interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; 702 phy-mode = "mii"; 703 reg-io-width = <4>; 704 smsc,irq-active-high; 705 smsc,irq-push-pull; 706 vdd33a-supply = <&veth>; 707 vddvario-supply = <&veth>; 708 }; 709 710 usb@4f000000 { 711 compatible = "nxp,usb-isp1761"; 712 reg = <0x4f000000 0x20000>; 713 interrupt-parent = <&intc_tc11mp>; 714 interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; 715 port1-otg; 716 }; 717 }; 718}; 719